Understanding Starch Structure: Recent Progress

High temperature boosts resistant starch content by altering starch structure and lipid content in rice ssIIIa mutants

High temperature (HT) during grain filling had adverse influences on starch synthesis. In this study, the influences of HT on resistant starch (RS) formation in rice were investigated. Most genes in ssIIIa mutants especially in RS4 were upregulated under Normal Temperature (NT) while downregulated under HT when compared with those of wild parent R7954. ssIIIa mutants had higher RS content, more lipid accumulation, higher proportion of short chains of DP 9-15, and less long chains of DP ≥37. ssIIIa mutation exacerbated the influences of HT on starch metabolite and caused larger declines in the expression of BEI, BEIIa, BEIIb, and SSIVb when exposed to HT. HT reduced the contents of total starch and apparent amylose significantly in wild type but not in mutants. Meanwhile, lipids were enriched in all varieties, but the amounts of starch-lipid complexes and the RS content were only heightened in mutants under HT. HT led to greatest declines in the amount of DP 9-15 and increases in the proportion of fb3 (DP ≥37); the declines and increases were all larger in mutants, which resulted in varied starch crystallinity. The increased long-chain amylopectin and lipids may be the major contributor for the elevated RS content in mutants under HT through forming more starch-lipid complexes (RSV).

Biobased polymer resources and essential oils: a green combination for antibacterial applications

To fight nosocomial infections, the excessive use of antibiotics has led to the emergence of multidrug-resistant microorganisms, which are now considered a relevant public health threat by the World Health Organization. To date, most antibacterial systems are based on the use of petro-sourced polymers, but the global supplies of these resources are depleting. Besides, silver NPs are widely accepted as the most active biocide against a wide range of bacterial strains but their toxicity is an issue. The growing interest in natural products has gained increasing interest in the last decade. Therefore, the design of functional antibacterial materials derived from biomass remains a significant challenge for the scientific community. Consequently, attention has shifted to naturally occurring substances such as essential oils (EOs), which are classified as Generally Recognized as Safe (GRAS). EOs can offer an alternative to the common antimicrobial agents as an inner solution or biocide agent to inhibit the resistance mechanism. Herein, this review not only aims at providing developments in the antibacterial modes of action of EOs against various bacterial strains and the recent advances in genomic and proteomic techniques for the elucidation of these mechanisms but also presents examples of biobased polymer resource-based EO materials and their antibacterial activities. Especially, we describe the antibacterial properties of biobased polymers, e.g. cellulose, starch, chitosan, PLA PHAs and proteins, associated with EOs (cinnamon (CEO), clove (CLEO), bergamot (BEO), ginger (GEO), lemongrass (LEO), caraway (CAEO), rosemary (REO), Eucalyptus globulus (EGEO), tea tree (TTEO), orange peel (OPEO) and apricot (Prunus armeniaca) kernel (AKEO) essential oils). Finally, we discuss the influence of EOs on the mechanical strength of bio-based materials.

Comparative transcriptome analyses revealed key genes involved in high amylopectin biosynthesis in wheat

High amylopectin starch is an important modified starch for food processing industries. Despite a thorough understanding of starch biosynthesis pathway, the regulatory mechanism responsible for amylopectin biosynthesis is not well explored. The present study utilized transcriptome sequencing approach to understand the molecular basis of high amylopectin content in three high amylopectin mutant wheat lines ('TAC 6', 'TAC 358', and 'TAC 846') along with parent variety 'C 306'. Differential scanning calorimetry (DSC) of high amylopectin starch identified a high thermal transition temperature and scanning electron microscopy (SEM) revealed more spherical starch granules in mutant lines compared to parent variety. A set of 4455 differentially expressed genes (DEGs) were identified at two-fold compared to the parent variety in high amylopectin wheat mutants. At ten-fold, 279 genes, including two starch branching genes (SBEIIa and SBEIIb), were up-regulated and only 30 genes, including the starch debranching enzyme (DBE), were down-regulated. Among the genes, different isoforms of sucrose non-fermenting-1-related protein kinase-1 (TaSnRK1α2-3B and TaSnRK1α2-3D) and its regulatory subunit, sucrose non-fermenting-4 (SNF-4-2A, SNF-4-2B, and SNF-4-5D), were found to be highly up-regulated. Further, expression of the DEGs related to starch biosynthesis pathway and TaSnRK1α2 and SNF-4 was performed using qRT-PCR. High expression of TaSnRK1α2, SNF-4, and SBEII isoforms suggests their probable role in high amylopectin starch biosynthesis in grain endosperm.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03364-3.

The use of time domain 1 H NMR to study proton dynamics in starch-rich foods: A review

Starch is a major contributor to the carbohydrate portion of our diet. When it is present with water, it undergoes several transformations during heating and/or cooling making it an essential structure-forming component in starch-rich food systems (e.g., bread and cake). Time domain proton nuclear magnetic resonance (TD ¹ H NMR) is a useful technique to study starch-water interactions by evaluation of molecular mobility and water distribution. The data obtained correspond to changes in starch structure and the state of water during or resulting from processing. When this technique was first applied to starch(-rich) foods, significant challenges were encountered during data interpretation of complex food systems (e.g., cake or biscuit) due to the presence of multiple constituents (proteins, carbohydrates, lipids, etc.). This article discusses the principles of TD ¹ H NMR and the tools applied that improved characterization and interpretation of TD NMR data. More in particular, the major differences in proton distribution of various dough and cooked/baked food systems are examined. The application of variable-temperature TD ¹ H NMR is also discussed as it demonstrates exceptional ability to elucidate the molecular dynamics of starch transitions (e.g., gelatinization, gelation) in dough/batter systems during heating/cooling. In conclusion, TD NMR is considered a valuable tool to understand the behavior of starch and water that relate to the characteristics and/or quality of starchy food products. Such insights are crucial for food product optimization and development in response to the needs of the food industry.

Physicochemical, Pasting, and Thermal Properties of Native Corn Starch-Mung Bean Protein Isolate Composites

Starch is widely used in food and non-food industries because of its unique characteristics. However, native starch shows some weaknesses that restrict its applications. Recently, some studies have demonstrated the benefits of using protein to overcome these limitations. Therefore, the aim of the present study was to investigate the effect of mung bean protein isolate (MBPI) (2%, 4%, 6%, and 8%) on the physicochemical, pasting, and thermal properties of native corn starch (NCS), as a novel starch-protein composite. Higher swelling power (SP), water absorbance capacity (WAC), and solubility values of NCS were observed with increasing MBPI concentration. Additionally, by the addition of MBPI, the rapid visco analyzer (RVA) showed a reduction in pasting temperature (77.98 to 76.53 °C), final viscosity (5762 to 4875 cP), and setback (3063 to 2400 cP), while the peak viscosity (4691 to 5648 cP) and breakdown (1992 to 3173 cP) increased. The thermal properties of NCS/MBPI gels investigated by differential scanning calorimetry (DSC) showed higher onset, peak, and conclusion temperatures (69.69 to 72.21 °C, 73.45 to 76.72 °C, and 77.75 to 82.26 °C, respectively), but lower gelatinization enthalpy (10.85 to 8.79 J/g) by increasing MBPI concentration. Fourier transform infrared spectroscopy (FT-IR) indicated that the addition of MBPI decreased the amount of hydrogen bonds within starch. Furthermore, after three cycles of freeze-thaw shocks, the syneresis of NCS-MBPI composites decreased from 38.18 to 22.01%. These results indicated that the MBPI could improve the physicochemical properties of NCS, especially its syneresis and retrogradation characteristics.

Formation of Starch-Lipid Complexes during the Deep-Frying Process and Its Effects on Lipid Oxidation

In the present study, maize starch (MS), potato starch (PS), high-amylose maize starch (HAMS), and wheat starch (WS) were deep-fried in soybean oil that was continuously heated for 40 h under 180 °C. The thermodynamic and pasting properties of deep-fried starch samples were determined. The results suggested that starch−lipid complexes formed with the extension of frying oils’ usage; however, their number was not dependent on the frying oils’ life cycle. Importantly, the results of pasting properties revealed the following strength of intermolecular force in deep-fried starch samples: PS > MS > HAMS > WS. The results of XRD and FTIR analysis confirmed the formation of starch−lipid complexes during the deep-frying process. Furthermore, the results of the in vitro digestibility of deep-fried starch revealed that the formation of starch−lipid complexes inhibited the swelling of starch granules and prevented the entrance of amylase into the interior. Additionally, the results of the oxidation stability of deep-frying oil indicated that the formation of starch−lipid complexes did not alter the trend of lipid oxidation as an effect of the limited number of starch−lipid complexes. These results could have critical implications for the development of healthier deep-fried foods.

Histological Evaluation of Cassava Starch/Chicken Gelatin Membranes

The use of biopolymers for tissue engineering has recently gained attention due to the need for safer and highly compatible materials. Starch is one of the most used biopolymers for membrane preparation. However, incorporating other polymers into starch membranes introduces improvements, such as better thermal and mechanical resistance and increased water affinity, as we reported in our previous work. There are few reports in the literature on the biocompatibility of starch/chicken gelatin composites. We assessed the in vivo biocompatibility of the five composites (T1–T5) cassava starch/gelatin membranes with subdermal implantations in biomodels at 30, 60, and 90 days. The FT-IR spectroscopy analysis demonstrated the main functional groups for starch and chicken gelatin. At the same time, the thermal study exhibited an increase in thermal resistance for T3 and T4, with a remaining mass (~15 wt.%) at 800 °C. The microstructure analysis for the T2–T4 demonstrated evident roughness changes with porosity presence due to starch and gelatin mixture. The decrease in the starch content in the composites also decreased the gelatinization heats for T3 and T4 (195.67, 196.40 J/g, respectively). Finally, the implantation results demonstrated that the formulations exhibited differences in the degradation and resorption capacities according to the starch content, which is easily degraded by amylases. However, the histological results showed that the samples demonstrated almost complete reabsorption without a severe immune response, indicating a high in vivo biocompatibility. These results show that the cassava starch/chicken gelatin composites are promising membrane materials for tissue engineering applications.

Reactive Extrusion as a Pretreatment in Cassava (Manihot esculenta Crantz) and Pea (Pisum sativum L.) Starches to Improve Spinnability Properties for Obtaining Fibers

Starch is a biocompatible and economical biopolymer in which interest has been shown in obtaining electrospun fibers. This research reports that cassava (CEX) and pea (PEX) starches pretreated by means of reactive extrusion (REX) improved the starches rheological properties and the availability of amylose to obtain fibers. Solutions of CEX and PEX (30-36% w/v) in 38% v/v formic acid were prepared and the rheological properties and electrospinability were studied. The rheological values indicated that to obtain continuous fibers without beads, the entanglement concentration (Ce) must be 1.20 and 1.25 times the concentration of CEX and PEX, respectively. In CEX, a higher amylose content and lower viscosity were obtained than in PEX, which resulted in a greater range of concentrations (32-36% w/v) to obtain continuous fibers without beads with average diameters ranging from 316 ± 65 nm to 394 ± 102 nm. In PEX, continuous fibers without beads were obtained only at 34% w/v with an average diameter of 170 ± 49 nm. This study showed that starches (20-35% amylose) pretreated through REX exhibited electrospinning properties to obtain fibers, opening the opportunity to expand their use in food, environmental, biosensor, and biomedical applications, as vehicles for the administration of bioactive compounds.

Effects of Extrusion on Starch Molecular Degradation, Order-Disorder Structural Transition and Digestibility-A Review

Extrusion is a thermomechanical technology that has been widely used in the production of various starch-based foods and can transform raw materials into edible products with unique nutritional characteristics. Starch digestibility is a crucial nutritional factor that can largely determine the human postprandial glycemic response, and frequent consumption of foods with rapid starch digestibility is related to the occurrence of type 2 diabetes. The extrusion process involves starch degradation and order-disorder structural transition, which could result in large variance in starch digestibility in these foods depending on the raw material properties and processing conditions. It provides opportunities to modify starch digestibility by selecting a desirable combination of raw food materials and extrusion settings. This review firstly introduces the application of extrusion techniques in starch-based food production, while, more importantly, it discusses the effects of extrusion on the alteration of starch structures and consequentially starch digestibility in various foods. This review contains important information to generate a new generation of foods with slow starch digestibility by the extrusion technique.

Development of a Novel Rice-Based Snack Enriched with Chicory Root: Physicochemical and Sensory Properties

A novel rice-based snack enriched with chicory root flour (CRF) was developed by twin-screw extrusion. Chicory (Cichorium intybus L.) is one of the promising medicinal plants for the development of innovative food and may be considered a functional food ingredient. Central composite design (CCD) was employed to generate snack formulations by varying feed moisture (M, 16.3–22.5%), screw speed (SS, 500–900 rpm) and CRF content (20–40%). The optimization according to artificial neural network modeling and a genetic algorithm was applied to define optimal process conditions (17.6% moisture, 820 rpm and 24.1% of CRF) for obtaining the product with the highest expansion (3.34), crispiness (3.22 × 10−3), volume (2040 m3), degree of gelatinization (69.70%) and good color properties. Bulk density (110.33 g/L), density (250 kg/m3), and hardness (98.74 N) resulted in low values for the optimal sample. The descriptive sensory analysis evaluated low hardness and bitterness, with high crispiness for the optimal extrudate. This study points to the possibility of a novel chicory enriched extrudate production with desirable physicochemical and sensory properties.

LIKE EARLY STARVATION 1 alters the glucan structures at the starch granule surface and thereby influences the action of both starch-synthesizing and starch-degrading enzymes

For starch metabolism to take place correctly, various enzymes and proteins acting on the starch granule surface are crucial. Recently, two non-catalytic starch-binding proteins, pivotal for normal starch turnover in Arabidopsis leaves, namely, EARLY STARVATION 1 (ESV1) and its homolog LIKE EARLY STARVATION 1 (LESV), have been identified. Both share nearly 38% sequence homology. As ESV1 has been found to influence glucan phosphorylation via two starch-related dikinases, α-glucan, water dikinase (GWD) and phosphoglucan, water dikinase (PWD), through modulating the surface glucan structures of the starch granules and thus affecting starch degradation, we assess the impact of its homolog LESV on starch metabolism. Thus, the 65-kDa recombinant protein LESV and the 50-kDa ESV1 were analyzed regarding their influence on the action of GWD and PWD on the surface of the starch granules. We included starches from various sources and additionally assessed the effect of these non-enzymatic proteins on other starch-related enzymes, such as starch synthases (SSI and SSIII), starch phosphorylases (PHS1), isoamylase and β-amylase. The data obtained indicate that starch phosphorylation, hydrolyses and synthesis were affected by LESV and ESV1. Furthermore, incubation with LESV and ESV1 together exerted an additive effect on starch phosphorylation. In addition, a stable alteration of the glucan structures at the starch granule surface following treatment with LESV and ESV1 was observed. Here, we discuss all the observed changes that point to modifications in the glucan structures at the surface of the native starch granules and present a model to explain the existing processes.

Physiochemical and thermal characterisation of faba bean starch

The structure and physicochemical properties of starch isolated from the cotyledon and hull of faba beans and from wheat (as reference) were examined using 16 different methods. The amylose content in faba bean cotyledon and hull starch was 32% and 36%, respectively, and that in wheat starch was 21%. The faba bean cotyledon and hull starch were structurally alike both displaying C-polymorphic pattern, a similar degree of branching and similar branch chain length distributions. Wheat starch had a significantly greater prevalence of short amylopectin chains (DP < 12) and a higher degree of branching. Granules in both faba bean starches exhibited surface cracks and were more homogenous in size than the smoother wheat starch granules. Gelatinisation temperature was higher for the faba bean starches, likely as an effect of high amylose content and longer starch chains delaying granular swelling. Cotyledon starch produced pastes with the highest viscosities in all rheological measurements, probably owing to larger granules. Higher prevalence of lipids and resistant starch reduced the viscosity values for hull starch. For all starches, viscosity increased at faster heating rates. During the rheological analyses, the samples were exposed to different instruments, heating rates and temperatures ranges, differing from standard rheological procedures, which could help predict how different processing techniques effect the final starch textures.

Graphical abstract

Anti-cancer Potential of Polysaccharide Extracted From Polygonatum sibiricum on HepG2 Cells via Cell Cycle Arrest and Apoptosis

Polygonatum sibiricum is one of the most widely used traditional Chinese medicine in China. Polygonatum sibiricum polysaccharide (PSP) is the main functional component of Polygonatum sibiricum. In this study, a water-soluble polysaccharide (PSP-1) was first isolated from Polygonatum sibiricum with a molecular weight of 38.65 kDa. Structural analysis was performed via methylation and FT-IR spectroscopy analyses, which in combination with NMR spectroscopy, revealed that PSP-1 has a → 4-α-D-Glcp-1 → backbone with the substitution at O-6 with the β-D-Glcp-1 → residues. Furthermore, PSP-1 exhibited potent and concentration-dependent anticancer effects, inducing HepG2 cell apoptosis and arresting the cell cycle at the G1 phase. Moreover, PSP-1 also decreased the mitochondrial membrane potential, damaged the nucleus of HepG2 cells, and increased the activity of caspase-9 and−3 in the intrinsic apoptotic pathways to induce HepG2 cell apoptosis. To conclude, PSP-1 might be a good candidate for the treatment of liver cancer, and this work provides important information for understanding the relationship between structure and antitumor activity of PSP-1, which is relevant for the treatment of hepatocellular carcinoma in clinic.

Loss of starch synthase IIIa changes starch molecular structure and granule morphology in grains of hexaploid bread wheat

Starch synthase III plays a key role in starch biosynthesis and is highly expressed in developing wheat grains. To understand the contribution of SSIII to starch and grain properties, we developed wheat ssIIIa mutants in the elite cultivar Cadenza using in silico TILLING in a mutagenized population. SSIIIa protein was undetectable by immunoblot analysis in triple ssIIIa mutants carrying mutations in each homoeologous copy of ssIIIa (A, B and D). Loss of SSIIIa in triple mutants led to significant changes in starch phenotype including smaller A-type granules and altered granule morphology. Starch chain-length distributions of double and triple mutants indicated greater levels of amylose than sibling controls (33.8% of starch in triple mutants, and 29.3% in double mutants vs. 25.5% in sibling controls) and fewer long amylopectin chains. Wholemeal flour of triple mutants had more resistant starch (6.0% vs. 2.9% in sibling controls) and greater levels of non-starch polysaccharides; the grains appeared shrunken and weighed ~ 11% less than the sibling control which was partially explained by loss in starch content. Interestingly, our study revealed gene dosage effects which could be useful for fine-tuning starch properties in wheat breeding applications while minimizing impact on grain weight and quality.

Edible Polymers and Secondary Bioactive Compounds for Food Packaging Applications: Antimicrobial, Mechanical, and Gas Barrier Properties

Edible polymers such as polysaccharides, proteins, and lipids are biodegradable and biocompatible materials applied as a thin layer to the surface of food or inside the package. They enhance food quality by prolonging its shelf-life and avoiding the deterioration phenomena caused by oxidation, humidity, and microbial activity. In order to improve the biopolymer performance, antimicrobial agents and plasticizers are also included in the formulation of the main compounds utilized for edible coating packages. Secondary natural compounds (SC) are molecules not essential for growth produced by some plants, fungi, and microorganisms. SC derived from plants and fungi have attracted much attention in the food packaging industry because of their natural antimicrobial and antioxidant activities and their effect on the biofilm’s mechanical properties. The antimicrobial and antioxidant activities inhibit pathogenic microorganism growth and protect food from oxidation. Furthermore, based on the biopolymer and SC used in the formulation, their specific mass ratio, the peculiar physical interaction occurring between their functional groups, and the experimental procedure adopted for edible coating preparation, the final properties as mechanical resistance and gas barrier properties can be opportunely modulated. This review summarizes the investigations on the antimicrobial, mechanical, and barrier properties of the secondary natural compounds employed in edible biopolymer-based systems used for food packaging materials.

Rheology, stability, antioxidant properties, and curcumin release of oil-in-water Pickering emulsions stabilized by rice starch nanoparticles

Modification of rice starch nanoparticles (SNP) as an emulsifier in Pickering emulsions is reported in this work. The SNP was prepared by HCl hydrolysis with different resident times and subsequently modified via crosslinking by citric acid using various crosslinking times to improve the hydrophobicity of SNP. The modified SNP was used to prepare sunflower oil-in-water Pickering emulsions loaded with curcumin. The optimal hydrolysis conditions (2.2 M HCl, 6 days) produced SNP with a 21.87 ± 0.69 % yield and 45.56 ± 0.00 % crystallinity. The citric acid-modified SNP with a 6-h crosslinking period (SNP-M-6 h) had a water contact angle of 87.2°. The suitable Pickering emulsion containing 30 wt% curcumin-loaded sunflower oil was stabilized by 3.0 wt% SNP-M-6 h. This Pickering emulsion had shear thinning properties with a pseudoplastic fluid behavior and was characterized by a droplet size of 47.16 ± 4.22 μm with a high degree of stability over five weeks of storage. Furthermore, the curcumin release from the emulsion depended on the pH, and curcumin could maintain its free radical scavenging quality. A very beneficial property of the Pickering emulsion is that it can slowly release curcumin at low pH, but more rapid release at higher pH, making it a potentially excellent candidate for drug delivery through oral intake.

Valorization of Starch to Biobased Materials: A Review

Many concerns are being expressed about the biodegradability, biocompatibility, and long-term viability of polymer-based substances. This prompted the quest for an alternative source of material that could be utilized for various purposes. Starch is widely used as a thickener, emulsifier, and binder in many food and non-food sectors, but research focuses on increasing its application beyond these areas. Due to its biodegradability, low cost, renewability, and abundance, starch is considered a "green path" raw material for generating porous substances such as aerogels, biofoams, and bioplastics, which have sparked an academic interest. Existing research has focused on strategies for developing biomaterials from organic polymers (e.g., cellulose), but there has been little research on its polysaccharide counterpart (starch). This review paper highlighted the structure of starch, the context of amylose and amylopectin, and the extraction and modification of starch with their processes and limitations. Moreover, this paper describes nanofillers, intelligent pH-sensitive films, biofoams, aerogels of various types, bioplastics, and their precursors, including drying and manufacturing. The perspectives reveal the great potential of starch-based biomaterials in food, pharmaceuticals, biomedicine, and non-food applications.

A review of starch, a unique biopolymer - Structure, metabolism and in planta modifications

Starch is a complex carbohydrate polymer produced by plants and especially by crops in huge amounts. It consists of amylose and amylopectin, which have α-1,4- and α-1,6-linked glucose units. Despite this simple chemistry, the entire starch metabolism is complex, containing various (iso)enzymes/proteins. However, whose interplay is still not yet fully understood. Starch is essential for humans and animals as a source of nutrition and energy. Nowadays, starch is also commonly used in non-food industrial sectors for a variety of purposes. However, native starches do not always satisfy the needs of a wide range of (industrial) applications. This review summarizes the structural properties of starch, analytical methods for starch characterization, and in planta starch modifications.

How Does Starch Structure Impact Amylolysis? Review of Current Strategies for Starch Digestibility Study

In vitro digestibility of starch is a common analysis in human nutrition research, and generally consists of performing the hydrolysis of starch by α-amylase in specific conditions. Similar in vitro assays are also used in other research fields, where different methods can be used. Overall, the in vitro hydrolysis of native starch is a bridge between all of these methods. In this literature review, we examine the use of amylolysis assays in recent publications investigating the complex starch structure-amylolysis relation. This review is divided in two parts: (1) a brief review of the factors influencing the hydrolysis of starch and (2) a systematic review of the experimental designs and methods used in publications for the period 2016–2020. The latter reports on starch materials, factors investigated, characterization of the starch hydrolysis kinetics and data analysis techniques. This review shows that the dominant research strategy favors the comparison between a few starch samples most frequently described through crystallinity, granule type, amylose and chain length distribution with marked characteristics. This strategy aims at circumventing the multifactorial aspect of the starch digestion mechanism by focusing on specific features. An alternative strategy relies on computational approaches such as multivariate statistical analysis and machine learning techniques to decipher the role of each factor on amylolysis. While promising to address complexity, the limited use of a computational approach can be explained by the small size of the experimental datasets in most publications. This review shows that key steps towards the production of larger datasets are already available, in particular the generalization of rapid hydrolysis assays and the development of quantification approaches for most analytical results.

Impact of Amylose-Amylopectin Ratio of Starches on the Mechanical Strength and Stability of Acetylsalicylic Acid Tablets

The two main components of starch - amylose and amylopectin, are responsible for its interaction with moisture. This study investigated how moisture sorption properties of the starches with different amylose-amylopectin ratio impacted tablet properties including drug stability. The starch samples were equilibrated to 33, 53, and 75% relative humidity (RH) and then assessed for tabletability, compactibility, and yield pressure. Effect of humidity on viscoelastic recovery was also evaluated. Tabletability and compactibility of high-amylose starch were better than that of high-amylopectin starch at 33 and 53% RH. However, at 75% RH, the reverse was observed. In terms of yield pressure, high-amylose starch had lower yield pressure than high-amylopectin starch. High-amylose starch tablets also exhibited lower extent of viscoelastic recovery than high-amylopectin starch tablets. The variations in the tableting properties were found to be related to relative locality of the sorbed moisture. Degradation of acetylsalicylic acid in high-amylose starch tablets at 75% RH, 40°C was less than the tablets with high-amylopectin starch. This observation could be attributed to the greater amount of water molecules binding sites in high-amylose starch. Furthermore, most of the sorbed moisture of high-amylose starch was internally absorbed moisture, therefore limiting the availability of diffusible sorbed moisture for degradation reaction. Findings from this study could provide better insights on the influence of amylose-amylopectin ratio on tableting properties and stability of moisture-sensitive drugs. This is of particular importance as starch is a common excipient in solid dosage forms.

Preparation of Natural Food-Grade Core-Shell Starch/Zein Microparticles by Antisolvent Exchange and Transglutaminase Crosslinking for Reduced Digestion of Starch

The purpose of this study was to slow down the digestibility of starch granules by encapsulating it in zein shells. Drop of the preformed swollen corn starch (CS) granule suspension into thermal-treated zein ethanolic solution enables antisolvent precipitation of thermal-treated zein on the surface of the preformed swollen CS granules, leading to the formation of core-shell starch/zein microparticles. Confocal laser scanning microscopy images showed that the preformed swollen CS granules were coated by thermal-treated zein shells with a thickness of 0.48–0.95 μm. The volume average particle diameter of core-shell starch/zein microparticles was 14.70 μm and reached 18.59–30.98 μm after crosslinking by transglutaminase. The results of X-ray diffraction and Fourier transform infrared spectroscopy demonstrated that an interaction occurred between the preformed swollen CS granules and the thermal-treated zein. The results for thermodynamic characteristics, pasting properties, and swelling power indicated that the compact network structure of core-shell starch/zein microparticles crosslinked by transglutaminase could improve starch granule thermal stability and resistance to shearing forces. Compared to native CS, the peak gelatinization temperatures of core-shell starch/zein microparticles increased significantly (p < 0.05), with a maximum value of 76.64°C. The breakdown values and the swelling power at 95°C of core-shell starch/zein microparticles significantly (p < 0.05) decreased by 52.83–85.66% and 0.11–0.28%, respectively. The in vitro digestibility test showed that the contents of slowly digestible starch and resistant starch in the core-shell starch/zein microparticles increased to ∼42.66 and ∼34.75%, respectively, compared to those of native CS (9.56 and 2.48%, respectively). Our research supports the application of food-grade core-shell starch/zein microparticles to formulate low-digestibility food products.

Faba Bean: An Untapped Source of Quality Plant Proteins and Bioactives

Faba beans are emerging as sustainable quality plant protein sources, with the potential to help meet the growing global demand for more nutritious and healthy foods. The faba bean, in addition to its high protein content and well-balanced amino acid profile, contains bioactive constituents with health-enhancing properties, including bioactive peptides, phenolic compounds, GABA, and L-DOPA. Faba bean peptides released after gastrointestinal digestion have shown antioxidant, antidiabetic, antihypertensive, cholesterol-lowering, and anti-inflammatory effects, indicating a strong potential for this legume crop to be used as a functional food to help face the increasing incidences of non-communicable diseases. This paper provides a comprehensive review of the current body of knowledge on the nutritional and biofunctional qualities of faba beans, with a particular focus on protein-derived bioactive peptides and how they are affected by food processing. It further covers the adverse health effects of faba beans associated with the presence of anti-nutrients and potential allergens, and it outlines research gaps and needs.

High-amylose starch: Structure, functionality and applications

Starch with a high amylose (AM) content (high AM starch, HAS) has attracted increasing research attention due to its industrial application potential, such as functional foods and biodegradable packaging. In the past two decades, HAS structure, functionality, and applications have been the research hotspots. However, a review that comprehensively summarizes these areas is lacking, making it difficult for interested readers to keep track of past and recent advances. In this review, we highlight studies that benefited from rapidly developing techniques, and systematically review the structure, functionality, and applications of HAS. We particularly emphasize the relationships between HAS molecular structure and physicochemical properties.

Fermentation Characteristics of Rye and Sorghum Depending on Water:Feed Ratio

This study was conducted to determine the fermentation characteristics of rye or sorghum mixed with different ratios of water (25%, 37.5%, 50%, 62.5%, and 75% in dry matter (DM)), incubated up to 48 h. The pH of the fermented rye at a DM content of 25% after 24 h had the lowest values (3.57) compared to that at a DM content of 75% (6.42). In fermented sorghum, pH values were lower than 4 already after incubation at 25% DM for 12 h (3.93) in comparison to that at DM content 75% (6.51). The L-lactic acid concentration in the fermented rye with 25% DM content after 24 h was significantly the highest (18.7 g/kg DM), as was that of sorghum with 25% DM content after 24 h (22.2 g/kg DM). Moreover, the acetic acid level in the fermented rye with 25% DM content after 24 h was significantly the highest (3.02 g/kg DM) compared to the other DM contents of fermented rye. Also, in fermented sorghum (25% DM), the acetic acid content was significantly the greatest (1.49 g/kg DM) in comparison to the other DM contents of fermented sorghum. Overall, fermented rye and sorghum containing 25 or 37.5% DM for 24 h and 12 h for rye and sorghum, respectively are sufficient for fermentation to be optimized based on the values of pH and lactic acid content, except for acetic acid content, which may negatively affect the palatability in animals.

Synthesis, Characterization, and Optimization Studies of Starch/Chicken Gelatin Composites for Food-Packaging Applications

The indiscriminate use of plastic in food packaging contributes significantly to environmental pollution, promoting the search for more eco-friendly alternatives for the food industry. This work studied five formulations (T1–T5) of biodegradable cassava starch/gelatin films. The results showed the presence of the starch/gelatin functional groups by FT-IR spectroscopy. Differential scanning calorimetry (DSC) showed a thermal reinforcement after increasing the amount of gelatin in the formulations, which increased the crystallization temperature (Tc) from 190 °C for the starch-only film (T1) to 206 °C for the film with 50/50 starch/gelatin (T3). It also exhibited a homogeneous surface morphology, as evidenced by scanning electron microscopy (SEM). However, an excess of gelatin showed low compatibility with starch in the 25/75 starch/gelatin film (T4), evidenced by the low Tc definition and very rough and fractured surface morphology. Increasing gelatin ratio also significantly increased the strain (from 2.9 ± 0.5% for T1 to 285.1 ± 10.0% for T5) while decreasing the tensile strength (from 14.6 ± 0.5 MPa for T1 to 1.5 ± 0.3 MPa for T5). Water vapor permeability (WVP) increased, and water solubility (WS) also decreased with gelatin mass rising in the composites. On the other hand, opacity did not vary significantly due to the films’ cassava starch and gelatin ratio. Finally, optimizing the mechanical and water barrier properties resulted in a mass ratio of 53/47 cassava starch/gelatin as the most appropriate for their application in food packaging, indicating their usefulness in the food-packaging industry.

A Review of Biomass Briquette Binders and Quality Parameters

The adverse effect of the use of fossil fuels on the environment and public health has given rise to a sustained renewable energy research and development. An important component of global renewable energy mix is the use of loose biomass, including agricultural and forestry residues, to produce solid fuels in the form of briquettes. Briquettes play a significant role in bioenergy mix in developing and developed countries. The production of biomass briquettes often entails the collection, transportation, storage, processing, and compaction of loose biomass that meet specific quality parameters. The densification process often involves the addition of binders to improve the cohesive strength of the briquette material. This paper surveys recent literature from 2012 to 2021 to establish the current state of research on the use of binders in briquette production; and reviews current parameters used in assessing the quality of biomass briquettes with focus on mechanical and handling properties. While a number of quality parameters were identified, their assessment methodologies varied widely in the literature, thus necessitating standardization for comparability purposes. The review also includes factors affecting the wide production and adoption of biomass briquettes in most developing economies and proposes ways of overcoming the bottlenecks.

High Amylose-Based Bio Composites: Structures, Functions and Applications

As biodegradable and eco-friendly bio-resources, polysaccharides from a wide range of sources show steadily increasing interest. The increasing fossil-based production of materials are heavily associated with environmental and climate concerns, these biopolymers are addressing such concerns in important areas such as food and biomedical applications. Among polysaccharides, high amylose starch (HAS) has made major progress to marketable products due to its unique properties and enhanced nutritional values in food applications. While high amylose-maize, wheat, barley and potato are commercially available, HAS variants of other crops have been developed recently and is expected to be commercially available in the near future. This review edifies various forms and processing techniques used to produce HAS-based polymers and composites addressing their favorable properties as compared to normal starch. Low toxic and high compatibility natural plasticizers are of great concern in the processing of HAS. Further emphasis, is also given to some essential film properties such as mechanical and barrier properties for HAS-based materials. The functionality of HAS-based functionality can be improved by using different fillers as well as by modulating the inherent structures of HAS. We also identify specific opportunities for HAS-based food and biomedical fabrications aiming to produce cheaper, better, and more eco-friendly materials. We acknowledge that a multidisciplinary approach is required to achieve further improvement of HAS-based products providing entirely new types of sustainable materials.

The relationship between linear chain length distributions of amylopectin and the functional properties of the debranched starch-based films

The relationship between linear chain length distributions and the functional properties of the starch-based films after pullulanase debranching treatment of corn (CS), rice (RS) and wheat (WS) were investigated. The results indicated that the film thickness was negatively correlated with A chains content (r = -0.939) and apparent amylose content (r = -0.926), and was positively correlated with B3 chains content (r = 0.847). The tensile strength of the debranched starch-based films were positively correlated with apparent amylose content (r = 0.813), and the elongation at break were inversely proportional to B3 chains content (r = -0.817). The hydrophobicity of the starch-based films was positively and negatively correlated with the proportions of linear chains with DP 6-12 (r = 0.892) and DP 25-36 (r = -0.863), respectively. On the contrary, no significant correlation was noticed between chain length distribution of amylopectin and transparency and thermal stability.

On the cluster structure of amylopectin

Two opposing models for the amylopectin structure are historically and comprehensively reviewed, which leads us to a better understanding of the specific fine structure of amylopectin. Amylopectin is a highly branched glucan which accounts for approximately 65-85 of starch in most plant tissues. However, its fine structure is still not fully understood due to the limitations of current methodologies. Since the 1940 s, many scientists have attempted to elucidate the distinct structure of amylopectin. One of the most accepted concepts is that amylopectin has a structural element known as "cluster", in which neighboring side chains with a degree of polymerization of ≥ 10 in the region of their non-branched segments form double helices. The double helical structures are arranged in inter- and intra-clusters and are the origin of the distinct physicochemical and crystalline properties of starch granules. Several models of the cluster structure have been proposed by starch scientists worldwide during the progress of analytical methods, whereas no direct evidence so far has been provided. Recently, Bertoft and colleagues proposed a new model designated as "the building block and backbone (BB) model". The BB model sharply contrasts with the cluster model in that the structural element for the BB model is the building block, and that long chains are separately synthesized and positioned from short chains constituting the building block. In the present paper, we conduct the historical review of the cluster concept detailing how and when the concept was established based on experimental results by many scientists. Then, differences between the two opposing concepts are explained and both models are critically discussed, particularly from the point of view of the biochemical regulation of amylopectin biosynthesis.

Double zero tillage and foliar phosphorus fertilization coupled with microbial inoculants enhance maize productivity and quality in a maize-wheat rotation

Maize is an important industrial crop where yield and quality enhancement both assume greater importance. Clean production technologies like conservation agriculture and integrated nutrient management hold the key to enhance productivity and quality besides improving soil health and environment. Hence, maize productivity and quality were assessed under a maize–wheat cropping system (MWCS) using four crop-establishment and tillage management practices [FBCT–FBCT (Flat bed–conventional tillage both in maize and wheat); RBCT–RBZT (Raised bed–CT in maize and raised bed–zero tillage in wheat); FBZT–FBZT (FBZT both in maize and wheat); PRBZT–PRBZT (Permanent raised bed–ZT both in maize and wheat], and five P-fertilization practices [P₁₀₀ (100% soil applied-P); P₅₀ + 2FSP (50% soil applied-P + 2 foliar-sprays of P through 2% DAP both in maize and wheat); P₅₀ + PSB + AM-fungi; P₅₀ + PSB + AMF + 2FSP; and P₀ (100% NK with no-P)] in split-plot design replicated-thrice. Double zero-tilled PRBZT–PRBZT system significantly enhanced the maize grain, starch, protein and oil yield by 13.1–19% over conventional FBCT–FBCT. P₅₀ + PSB + AMF + 2FSP, integrating soil applied-P, microbial-inoculants and foliar-P, had significantly higher grain, starch, protein and oil yield by 12.5–17.2% over P₁₀₀ besides saving 34.7% fertilizer-P both in maize and on cropping-system basis. P₅₀ + PSB + AMF + 2FSP again had significantly higher starch, lysine and tryptophan content by 4.6–10.4% over P₁₀₀ due to sustained and synchronized P-bioavailability. Higher amylose content (24.1%) was observed in grains under P₅₀ + PSB + AMF + 2FSP, a beneficial trait due to its lower glycemic-index highly required for diabetic patients, where current COVID-19 pandemic further necessitated the use of such dietary ingredients. Double zero-tilled PRBZT–PRBZT reported greater MUFA (oleic acid, 37.1%), MUFA: PUFA ratio and P/S index with 6.9% higher P/S index in corn-oil (an oil quality parameter highly required for heart-health) over RBCT-RBCT. MUFA, MUFA: PUFA ratio and P/S index were also higher under P₅₀ + PSB + AMF + 2FSP; avowing the obvious role of foliar-P and microbial-inoculants in influencing maize fatty acid composition. Overall, double zero-tilled PRBZT–PRBZT with crop residue retention at 6 t/ha per year along with P₅₀ + PSB + AMF + 2FSP while saving 34.7% fertilizer-P in MWCS, may prove beneficial in enhancing maize productivity and quality so as to reinforce the food and nutritional security besides boosting food, corn-oil and starch industry in south-Asia and collateral arid agro-ecologies across the globe.