Metal Organic Framework Derived Materials: Progress and Prospects for the Energy Conversion and Storage

Application of MOF-based materials in electrochemical sensing

A summary of the most recent advancements of metal–organic frameworks (MOFs) for electrochemical sensing is listed in this frontier article.

A lightweight and low-cost electrode for lithium-ion batteries derived from paper towel supported MOF arrays

Cu-Doped Co/CoO/NC hybrid nanoplate arrays grown on a paper towel derived carbon paper substrate are synthesized and exhibit excellent performance as a low-cost and lightweight binder-free electrode for lithium-ion batteries.

Amorphous Intermediate Derivative from ZIF-67 and Its Outstanding Electrocatalytic Activity

Increasing active sites is an effective method to enhance the catalytic activity of catalysts. Amorphous materials have attracted considerable attention in catalysis because of their abundant catalytic active sites. Herein, a series of derivatives is prepared via the low-temperature heat treatment of ZIF-67 hollow sphere at different temperatures. An intermediate product with an amorphous structure is formed during transformation from ZIF-67 to Co₃ O₄ nanocrystallines when ZIF-67 hollow sphere is heat treated at 260 °C for 3 h. The chemical composition of the amorphous derivative is similar to that of ZIF-67, and the carbon and nitrogen contents of the amorphous derivative are obviously higher than those of crystalline samples obtained at 270 °C or higher. As electrocatalysts for the oxygen evolution reaction (OER) and nonenzymatic glucose sensing, the amorphous derivative exhibits significantly better catalytic activity than crystalline Co₃ O₄ samples. The amorphous sample as an OER catalyst has a low overpotential of 352 mV at 10 mA cm^-2 . The amorphous sample as an enzyme-free glucose sensing catalyst can provide a low detection limit of 3.9 × 10^-6 m and a high sensitivity of 1074.22 µA mM^-1 cm^-2 .

Engineering a hetero-MOF-derived TiO2–Co3O4 heterojunction decorated with nickel nanoparticles for enhanced photocatalytic activity even in pure water

A highly porous TiO₂/Co₃O₄/Ni ternary heterostructure with excellent photocatalytic activity is successfully constructed by adopting hetero-metal organic frameworks as a template and a facile photoreduction method.

MOF-derived electrocatalysts for oxygen reduction, oxygen evolution and hydrogen evolution reactions

The morphology and composition design of MOF-derived carbon-based materials and their applications for electrocatalytic ORR, OER and HER are reviewed.

3-(4-Methylthiophenyl)acetylacetone – ups and downs of flexibility in the synthesis of mixed metal–organic frameworks. Ditopic bridging of hard and soft cations and site-specific desolvation

Different Pearson-hardness of O and S donors leads to well-ordered mixed metal–organic frameworks.

MOF-derived ZnCo2O4 porous micro-rice with enhanced electro-catalytic activity for the oxygen evolution reaction and glucose oxidation

A porous ZnCo₂O₄ micro-rice like microstructure was synthesized via calcination of a Zn–Co MOF precursor at an appropriate temperature. The as-prepared ZnCo₂O₄ sample presented good electrocatalytic oxygen evolution reaction performance with a small overpotential (η₁₀ = 389 mV) and high stability in basic electrolyte. Furthermore, in basic medium, the as-synthesized ZnCo₂O₄ micro-rice also showed good electrocatalytic activity for glucose oxidation. A ZnCo₂O₄ micro-rice modified glass carbon electrode may be used as a potential non-enzymatic glucose sensor. The excellent electrocatalytic OER and glucose oxidation performances of ZnCo₂O₄ might be attributed to the unique porous structure formed by the nanoparticles. The porous architecture of the micro-rice can provide a large number of electrocatalytically active sites and high electrochemical surface area (ECSA). The result may offer a new way to prepare low-cost and high performance oxygen evolution reaction and glucose oxidation electrocatalysts.

A porous ZnCo₂O₄ micro-rice like microstructure was synthesized via calcination of a Zn–Co MOF precursor at an appropriate temperature.

Utilization of counter anions for charge transportation in the electrical device fabrication of Zn(ii) metal–organic frameworks

The present work reports the fabrication of anion-induced electrical devices with Zn(ii) metal–organic frameworks.

Ir-Doped Ni-based metal–organic framework ultrathin nanosheets on Ni foam for enhanced urea electro-oxidation

NiIr-based metal–organic frameworks grown on a nickel foam substrate (NiIr-MOF/NF) are synthesized by a solvothermal method and directly used for urea electro-oxidation.

Controlling the morphology of metal–organic frameworks and porous carbon materials: metal oxides as primary architecture-directing agents

We give a comprehensive overview of how the morphology control is an effective and versatile way to control the physicochemical properties of metal oxides that can be transferred to metal–organic frameworks and porous carbon materials.

Redox Tuning in Crystalline and Electronic Structure of Bimetal-Organic Frameworks Derived Cobalt/Nickel Boride/Sulfide for Boosted Faradaic Capacitance

The development of efficient electrode materials is a cutting-edge approach for high-performance energy storage devices. Herein, an effective chemical redox approach is reported for tuning the crystalline and electronic structures of bimetallic cobalt/nickel-organic frameworks (Co-Ni MOFs) to boost faradaic redox reaction for high energy density. The as-obtained cobalt/nickel boride/sulfide exhibits a high specific capacitance (1281 F g^-1 at 1 A g^-1 ), remarkable rate performance (802.9 F g^-1 at 20 A g^-1 ), and outstanding cycling stability (92.1% retention after 10 000 cycles). An energy storage device fabricated with a cobalt/nickel boride/sulfide electrode exhibits a high energy density of 50.0 Wh kg^-1 at a power density of 857.7 W kg^-1 , and capacity retention of 87.7% (up to 5000 cycles at 12 A g^-1 ). Such an effective redox approach realizes the systematic electronic tuning that activates the fast faradaic reactions of the metal species in cobalt/nickel boride/sulfide which may shed substantial light on inspiring MOFs and their derivatives for energy storage devices.

Metal-Layer Assisted Growth of Ultralong Quasi-2D MOF Nanoarrays on Arbitrary Substrates for Accelerated Oxygen Evolution

Controlled growth of metal-organic frameworks (MOFs) nanocrystals on requisite surfaces is highly desired for myriad applications related to catalysis, energy, and electronics. Here, this challenge is addressed by overlaying arbitrary surfaces with a thermally evaporated metal layer to enable the well-aligned growth of ultralong quasi-2D MOF nanoarrays comprising cobalt ions and thiophenedicarboxylate acids. This interfacial engineering approach allows preferred chelation of carboxyl groups in the ligands with the metal interlayers, thereby making possible the fabrication and patterning of MOF nanoarrays on substrates of any materials or morphologies. The MOF nanoarrays grown on porous metal scaffolds demonstrate high electrocatalytic capability for water oxidation, exhibiting a small overpotential of 270 mV at 10 mA cm^-2 , or 317 mV at 50 mA cm^-2 as well as negligible decay of performance within 30 h. The enhanced performance stems from the improved electron and ion transport in the hierarchical porous nanoarrays consisting of in situ formed oxyhydroxide nanosheets in the electrochemical processes. This approach for mediating the growth of MOF nanoarrays can serve as a promising platform for diverse applications.

Bimetallic nanoparticles decorated hollow nanoporous carbon framework as nanozyme biosensor for highly sensitive electrochemical sensing of uric acid

An ultrasensitive electrochemical biosensor was developed to identify the low levels of uric acid (UA) in human serum. The gold/cobalt (Au/Co) bimetallic nanoparticles (NPs) decorated hollow nanoporous carbon framework (Au/Co@HNCF) was synthesized as a nanozyme by pyrolysis of the Au (III)-etching zeolitic imidazolate framework-67 (ZIF-67). The external Au NPs combined with internal Co NPs on the hollow carbon framework exhibited enhanced activity for UA oxidation, thereby generating superior signals. Accordingly, the Au/Co@HNCF biosensor presented ranking performances with a low detection limit of 0.023 μM (S/N = 3), an ultrahigh sensitivity of 48.4 μA μM^-1 cm^-2, and an extensive response in the linear region of 0.1-25 μM and the logarithmic region of 25-2500 μM. Owing to the ordered nanoporous framework and carbon interfacial features, the Au/Co@HNCF biosensor displayed adequate selectivity for UA sensing over a series of biomolecules. In addition, the Au/Co@HNCF biosensor was employed to quantify UA in human serum samples. The test results were basically consistent with those of a commercial apparatus, and thus demonstrated that the proposed Au/Co@HNCF biosensor was reliable for UA determination in clinical research.

Nanobundles of Iron Phosphide Fabricated by Direct Phosphorization of Metal-Organic Frameworks as an Efficient Hydrogen-Evolving Electrocatalyst

Transition-metal-based phosphides (TMPs) have been considered as attractive electrocatalysts for water splitting due to their earth-abundance and remarkable catalytic activity. As a representative type of precursors, metal-organic frameworks (MOFs) provide ideal plateaus for the design of nanostructured TMPs. In this work, the hierarchically structured iron phosphide nanobundles (FeP-500) were fabricated by one-step phosphorization of an iron-based MOF (MET(Fe)) precursor. The derived FeP-500 nanobundles were constructed by quasi-paralleled one-dimensional nanorods with uneven surface, which provided channels for electrolyte penetration, mass transport, and effective exposure of active sites during the water-splitting process. With the addition of conductive Super P, the obtained FeP-500-S exhibited a good electrocatalytic performance towards the hydrogen evolution reaction in alkaline electrolyte (1 mol L^-1 KOH). Furthermore, to investigate the influence of secondary metal doping, a series of isoreticular MOF precursors and bimetallic TMPs were fabricated. The results indicated that the catalytic performance is structure dominated.

A novel electrochemical sensor based on molecularly imprinted polymer modified hollow N, S-Mo2C/C spheres for highly sensitive and selective carbendazim determination

A novel electrochemical sensor based on nitrogen and sulfur doped hollow Mo₂C/C spheres (N, S-Mo₂C) and molecularly imprinted polymer (MIP) was proposed for carbendazim (CBD) determination. The N, S-Mo₂C were prepared by first nitrogen and sulfur doping via one-pot method and subsequent carbonization at high temperature. A film of MIP was then fabricated in situ on the N, S-Mo₂C surface by electropolymerization, with CBD acting as template molecule and o-phenylenediamine as functional monomer. The N, S-Mo₂C were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and electrochemical behaviors of CBD on differently modified electrodes were explored by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimal conditions, a calibration curve of current shift versus the logarithm of CBD concentration was obtained in the range of 1×10^-12 ∼ 8×10^-9 M with a detection limit of 6.7×10^-13 M (S/N=3). Moreover, the proposed sensor exhibited favorable stability and selectivity, and was applied to analyze pesticide residues in fruits and vegetables with decent accuracy.

Review on Polymer-Based Composite Electrolytes for Lithium Batteries

Lithium-ion batteries have dominated the high performance and mobile market for last decade. Despite their dominance in many areas, the development of current commercial lithium-ion batteries is experiencing bottlenecks, limited by safety risks such as: leakage, burning, and even explosions due to the low-boiling point organic liquid electrolytes. Solid electrolyte is a promising option to solve or mitigate those issues. Among all solid electrolytes, polymer based solid electrolytes have the advantages of low flammability, good flexibility, excellent thermal stability, and high safety. Numerous researchers have focused on implementing solid polymer based Li-ion batteries with high performance. Nevertheless, low Li-ion conductivity and poor mechanical properties are still the main challenges in its commercial development. In order to tackle the issues and improve the overall performance, composites with external particles are widely investigated to form a polymer-based composite electrolyte. In light of their work, this review discusses the progress of polymer-based composite lithium ion's solid electrolytes. In particular, the structures, ionic conductivities, electrochemical/chemical stabilities, and fabrications of solid polymer electrolytes are introduced in the text and summarized at the end. On the basis of previous work, the perspectives of solid polymer electrolytes are provided especially toward the future of lithium ion batteries.

Pristine versus Pyrolyzed Metal-Organic Framework-based Oxygen Evolution Electrocatalysts: Evaluation of Intrinsic Activity Using Electrochemical Impedance Spectroscopy

Metal-organic frameworks (MOFs) have emerged as outstanding electrocatalysts for water oxidation. Commonly, MOFs are utilized for electrocatalytic water oxidation either in pristine or pyrolyzed form. Yet, despite significant advancements in their catalytic performance, further improvement requires new insights on the parameters influencing MOF-based catalysts activity. Here, we have conducted a detailed comparison between the intrinsic electrocatalytic properties of pristine and pyrolyzed Ni-Fe-based MOFs. Interestingly, although pristine MOF exhibits the maximum overall electrocatalytic performance, apparent turnover frequency (TOF) values (intrinsic activity) of all pyrolyzed MOFs exceeded the one of pristine MOF. Moreover, an upper-limit estimation of TOF was extracted using electrochemical impedance spectroscopy (EIS), by excluding IR-drops linked with the electrochemical cell. By doing so, EIS-extracted TOF values were 10-times higher compared to the apparent TOFs. Accordingly, a great leap in performance should still be expected for these catalysts, by designing conductive MOF-platforms having larger pore-diameters to reduce mass-transport limitations.

Selective decontamination of the reactive air pollutant nitrous acid via node-linker cooperativity in a metal-organic framework

Nitrous acid (HONO) is a reservoir of NO x and an emerging pollutant having direct impacts on air quality, both in- and outdoors, as well as on human health. In this work, the amine-functionalized metal-organic framework (MOF), UiO-66-NH2, was investigated due to its potential to selectively decontaminate nitrous acid at environmentally relevant concentrations. UiO-66-NH2 proved to be effective in the removal of nitrous acid from a continuous gaseous stream. This is observed via the formation of an aryl diazonium salt that subsequently converts to a phenol with a concomitant release of nitrogen gas. This process is preceded via the formation of the nitrosonium cation (likely protonation from an acidic proton on the node). Thus, UiO-66-NH2 is capable of selectively converting the pollutant nitrous acid to benign products.

Laser printing of optically resonant hollow crystalline carbon nanostructures from 1D and 2D metal-organic frameworks

Using a hybrid approach involving a slow diffusion method to synthesize 1D and 2D MOFs followed by their treatment with femtosecond infrared laser radiation, we generated 100-600 nm well-defined hollow spheres and hemispheres of graphite. This ultra-fast technique extends the library of shapes of crystalline MOF derivatives appropriate for all-dielectric nanophotonics.

Transformation of Metal-Organic Frameworks into Stable Organic Frameworks with Inherited Skeletons and Catalytic Properties

Metal-organic frameworks (MOFs) are an emerging class of porous materials with attractive properties, however, their practical applications are heavily hindered by their fragile nature. We report herein an effective strategy to transform fragile coordination bonds in MOFs into stable covalent organic bonds under mild annealing decarboxylative coupling reaction conditions, which results in highly stable organic framework materials. This strategy successfully endows intrinsic framework skeletons, porosity and properties of the parent MOFs in the daughter organic framework materials, which exhibit excellent chemical stability under harsh catalytic conditions. Therefore, this work opens a new avenue to synthesize stable organic framework materials derived from MOFs for applications in different fields.

Conductive MOF-Modified Separator for Mitigating the Shuttle Effect of Lithium-Sulfur Battery through a Filtration Method

Although there are plenty of merits for lithium-sulfur (Li-S) batteries, their undesired shuttle effect and insulated nature are hindering the practical applications. Here, a conductive metal-organic framework (MOF)-modified separator has been designed and fabricated through a facile filtration method to address the issues. Specifically, its intrinsic microporous structure, hydrophilic polar property, and conductive feature could make it easy to contact with and trap polysulfides and boost the kinetics of electrochemical reactions. Both the physical and chemical properties of the as-prepared separator are beneficial to alleviating the shuttle effect and enhancing the rate capability. Accordingly, the electrochemical performance of the battery with a MOF-modified separator was significantly improved.

New and Advanced Porous Carbon Materials in Fine Chemical Synthesis. Emerging Precursors of Porous Carbons

The efficiency of porous carbons in fine chemical synthesis, among other application fields, has been demonstrated since both the porous structure and chemical surface provide the appropriated chemical environment favoring a great variety of relevant chemical transformations. In recent years, metal organic frameworks (MOFs) and covalent organic frameworks (COFs) have emerged as interesting opportunities in the preparation of porous carbons with improved physico-chemical properties. Direct calcination of MOFs or COFs, in the presence or not of others carbon or heteroatom sources, could be considered an easy and practical approach for the synthesis of highly dispersed heteroatom-doped porous carbons but also new porous carbons in which single atoms of metallic species are present, showing a great development of the porosity; both characteristics of supreme importance for catalytic applications. The goal of this review is to provide an overview of the traditional methodologies for the synthesis of new porous carbon structures together with emerging ones that use MOFs or COFs as carbon precursors. As mentioned below, the catalytic application in fine chemical synthesis of these kinds of materials is at present barely explored, but probably will expand in the near future.

Emerging Materials in Heterogeneous Electrocatalysis Involving Oxygen for Energy Harvesting

Water-based renewable energy cycle involved in water splitting, fuel cells, and metal-air batteries has been gaining increasing attention for sustainable generation and storage of energy. The major challenges in these technologies arise due to the poor kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reactions (OER), besides the high cost of the catalysts. Attempts to address these issues have led to the development of many novel and inexpensive catalysts as well as newer mechanistic insights, particularly so in the last three-four years when more catalysts have been investigated than ever before. With the growing emphasis on bifunctionality, that is, materials that can facilitate both reduction and evolution of oxygen, this review is intended to discuss all major families of ORR, OER, and bifunctional catalysts such as metals, alloys, oxides, other chalcogenides, pnictides, and metal-free materials developed during this period in a single platform, while also directing the readers to specific and detailed review articles dealing with each family. In addition, each section highlights the latest theoretical and experimental insights that may further improve ORR/OER performances. The bifunctional catalysts being sufficiently new, no consensus appears to have emerged about the efficiencies. Therefore, a statistical analysis of their performances by considering nearly all literature reports that have appeared in this period is presented. The current challenges in rational design of these catalysts as well as probable strategies to improve their performances are presented.