Selected Copper-Based Reactions for C−N, C−O, C−S, and C−C Bond Formation

Nickel-Catalyzed Etherification of Phenols and Aryl Halides through Visible-Light-Induced Energy Transfer

Notwithstanding some progress in nickel-catalyzed etherification of alkanols and arylhalides, the ability of such a Ni-catalyzed transformation employing phenols to diaryl ethers is unsuccessful due to phenolates with much lower reduction potentials, which suppress the oxidation of nickel(II) intermediates into requisite Ni(III) species. We herein report visible-light-initiated, nickel-catalyzed O-arylation of phenols with arylhalides using t-BuNH(i-Pr) as the base and thioxanthen-9-one as the photosensitizer under visible light. This photocoupling exhibits a broad substrate scope.

Tandem copper catalyzed regioselective N-arylation-amidation: synthesis of angularly fused dihydroimidazoquinazolinones and the anticancer agent TIC10/ONC201

Herein, we present a copper-catalyzed tandem reaction of 2-aminoimidazolines and ortho-halo(hetero)aryl carboxylic acids that causes the regioselective formation of angularly fused tricyclic 1,2-dihydroimidazo[1,2-a]quinazolin-5(4H)-one derivatives. The reaction involved in the construction of the core six-membered pyrimidone moiety proceeded via regioselective N-arylation-condensation. The presented protocol been successfully applied to accomplish the total synthesis of TIC10/ONC201, which is an active angular isomer acting as a tumor necrosis factor (TNF)-related apoptosis-inducing ligand (TRAIL): a sought after anticancer clinical agent.

Cobalt-catalyzed cross-coupling reactions of aryl- and alkylaluminum derivatives with (hetero)aryl and alkyl bromides

A simple cobalt complex, such as Co(phen)Cl₂, turned out to be a highly efficient and cheap precatalyst for a host of cross-coupling reactions involving aromatic and aliphatic organoaluminum reagents with aryl, heteroaryl and alkyl bromides. New C(sp²)-C(sp²) and C(sp²)-C(sp³) bonds were formed in good to excellent yields and with high chemoselectivity, under mild reaction conditions.

Expedient Synthesis of Bridged Bicyclic Nitrogen Scaffolds via Orthogonal Tandem Catalysis

Bridged nitrogen bicyclic skeletons have been accessed via unprecedented site- and diastereoselective orthogonal tandem catalysis from readily accessible reactants in a step economic manner. Directed Pd-catalyzed γ-C(sp³ )-H olefination of aminocyclohexane with gem-dibromoalkenes, followed by a consecutive intramolecular Cu-catalyzed amidation of the 1-bromo-1-alkenylated product delivers the interesting normorphan skeleton. The tandem protocol can be applied on substituted aminocyclohexanes and aminoheterocycles, easily providing access to the corresponding substituted, aza- and oxa-analogues. The Cu catalyst of the Ullmann-Goldberg reaction additionally avoids off-cycle Pd catalyst scavenging by alkenylated reaction product. The picolinamide directing group stabilizes the enamine of the 7-alkylidenenormorphan, allowing further product post functionalizations. Without Cu catalyst, regio- and diastereoselective Pd-catalyzed γ-C(sp³ )-H olefination is achieved.

Chiral Arylated Amines via C-N Coupling of Chiral Amines with Aryl Bromides Promoted by Light

The Buchwald-Hartwig C-N coupling reaction has found widespread applications in organic synthesis. Over the past two decades or so, many improved catalysts have been introduced, allowing various amines and aryl electrophiles to be readily used nowadays. However, there lacks a protocol that could be used to couple a wide range of chiral amines and aryl halides, without erosion of the enantiomeric excess (ee). Reported in this article is a method based on molecular Ni catalysis driven by light, which enables stereoretentive C-N coupling of optically active amines, amino alcohols, and amino acid esters with aryl bromides, with no need for any external photosensitizer. The method is effective for a wide variety of coupling partners, including those bearing functional groups sensitive to bases and nucleophiles, thus providing a viable alternative to accessing synthetically important chiral N-aryl amines, amino alcohols, and amino acids esters. Its viability is demonstrated by 92 examples with up to 99 % ee.

Copper(i)-catalyzed asymmetric intramolecular C-arylation with ureas as the additives: highly enantioselective formation of spirooxindoles

A cooperative catalytic strategy is developed for a copper-catalyzed asymmetric intramolecular C-arylation reaction with ureas as the co-catalysts. By forming hydrogen bonds with 1,3-dicarbonyl structures, ureas can activate the substrates, stabilize the carbanion intermediates and the products, and fix the syn-configurations of 1,3-dicarbonyl structures. They help enhance the reactivity, prevent side reactions and improve the enantioselectivities.

Chemoselective, Scalable Nickel-Electrocatalytic O-Arylation of Alcohols

The formation of aryl-alkyl ether bonds through cross coupling of alcohols with aryl halides represents a useful strategic departure from classical SN 2 methods. Numerous tactics relying on Pd-, Cu-, and Ni-based catalytic systems have emerged over the past several years. Herein we disclose a Ni-catalyzed electrochemically driven protocol to achieve this useful transformation with a broad substrate scope in an operationally simple way. This electrochemical method does not require strong base, exogenous expensive transition metal catalysts (e.g., Ir, Ru), and can easily be scaled up in either a batch or flow setting. Interestingly, e-etherification exhibits an enhanced substrate scope over the mechanistically related photochemical variant as it tolerates tertiary amine functional groups in the alcohol nucleophile.

ChemBead Enabled High-Throughput Cross-Electrophile Coupling Reveals a New Complementary Ligand

High-throughput experimentation (HTE) methods are central to modern medicinal chemistry. While many HTE approaches to C-N and Csp2 -Csp2 bonds are available, options for Csp2 -Csp3 bonds are limited. We report here how the adaptation of nickel-catalyzed cross-electrophile coupling of aryl bromides with alkyl halides to HTE is enabled by AbbVie ChemBeads technology. By using this approach, we were able to quickly map out the reactivity space at a global level with a challenging array of 3×222 micromolar reactions. The observed hit rate (56 %) is competitive with other often-used HTE reactions and the results are scalable. A key to this level of success was the finding that bipyridine 6-carboxamidine (BpyCam), a ligand that had not previously been shown to be optimal in any reaction, is as general as the best-known ligands with complementary reactivity. Such "cryptic" catalysts may be common and modern HTE methods should facilitate the process of finding these catalysts.

Alkyl Radical-Free Cu(I) Photocatalytic Cross-Coupling: A Theoretical Study of Anomerically Specific Photocatalyzed Glycosylation of Pyranosyl Bromide

Previously, we reported a visible light-activated Cu(I) photocatalyst capable of facilitating C-O bond formation of glycosyl bromides and aliphatic alcohols with a high degree of diastereoselectivity. This catalyst functions equally well in the presence of radical traps, suggesting an entirely inner sphere mechanism atypical for heteroleptic Cu photocatalysis. Further, experimental estimates put the chromophore reducing power at -1.30 V vs Ag/AgCl. This is much more positive than the ∼-2.0 V vs Ag/AgCl onset observed for irreversible reduction of glycosyl bromides in our experiments. Theoretical investigations were undertaken to explain the function of the catalyst. Outer sphere electron transfer from a chromophore to substrate was discounted based on thermodynamics and electron transfer barriers determined by Marcus theory and non-equilibrium solvation calculations. Unactivated and activated chromophores were found to disproportionate to Cu(0) and Cu(II) species. The resulting Cu(0) species undergoes oxidative addition with a glycosyl bromide generating a Cu(II) species. Addition of a nucleophilic alcohol and oxidation of the Cu(II) species to Cu(III) result in rapid reductive elimination forming products and resetting the catalytic cycle.

Photoinduced Copper-Catalyzed Asymmetric C-O Cross-Coupling

The construction of carbon-heteroatom bonds is one of the most active areas of research in organic chemistry because the function of organic molecules is often derived from the presence of heteroatoms. Although considerable advances have recently been achieved in radical-involved catalytic asymmetric C-N bond formation, there has been little progress in the corresponding C-O bond-forming processes. Here, we describe a photoinduced copper-catalyzed cross-coupling of readily available oxime esters and 1,3-dienes to generate diversely substituted allylic esters with high regio- and enantioselectivity (>75 examples; up to 95% ee). The reaction proceeds at room temperature under excitation by purple light-emitting diodes (LEDs) and features the use of a single, earth-abundant copper-based chiral catalyst as both the photoredox catalyst for radical generation and the source of asymmetric induction in C-O coupling. Combined experimental and density functional theory (DFT) computational studies suggest the formation of π-allylcopper complexes from redox-active oxime esters as bifunctional reagents and 1,3-dienes through a radical-polar crossover process.

A copper nitride catalyst for the efficient hydroxylation of aryl halides under ligand-free conditions

Copper nitride (Cu3N) was used as a heterogeneous catalyst for the hydroxylation of aryl halides under ligand-free conditions. The cubic Cu3N nanoparticles showed high catalytic activity, comparable to those of conventional Cu catalysts with nitrogen ligands, demonstrating that the nitrogen atoms in Cu3N act as functional ligands that promote hydroxylation.

Easily accessible non-aromatic heterocycles with handles: 4-bromo-2,3-dihydrofurans from 1,2-dibromohomoallylic alcohols

The first general preparation of 4-bromo-2,3-dihydrofurans is reported. These non-aromatic heterocycles containing a useful coupling handle are accessed via Cu-catalyzed intramolecular cyclization of 1,2-dibromohomoallylic alcohols, which are themselves available in just two steps from aromatic and aliphatic aldehydes and ketones. Molecular dynamics simulations using the simple substrates and key geometric parameters provide a rationale for the selectivities observed. The synthetic utility of the 4-bromodihydrofurans is also demonstrated.

Selective hydroxylation of aryl iodides to produce phenols under mild conditions using a supported copper catalyst

Owing to the high activity and low-cost, copper-based catalysts are promising candidates for transforming aromatic halides to yield phenols. In this work, we report the selective hydroxylation of aromatic iodides to produce phenols using an atomically dispersed copper catalyst (Cu–ZnO–ZrO₂) under mild reaction conditions. The reactions were conducted without the use of additional organic ligands, and the protection of an inert atmosphere environment is not required. The catalyst can be easily prepared, scalable, and is very efficient for a wide range of substrates. The catalytic reactions can be carried out with only 1.24 mol% Cu loading, which shows great potential in mass production.

Atomically dispersed Cu catalyst was designed for highly efficient hydroxylation of aryl iodides under mild conditions.

A palladium-catalyzed approach to allenic aromatic ethers and first total synthesis of terricollene A

A palladium-catalyzed C-O bond formation reaction between phenols and allenylic carbonates to give 2,3-allenic aromatic ethers with decent to excellent yields under mild reaction conditions has been described. A variety of synthetically useful functional groups are tolerated and the synthetic utility of this method has been demonstrated through a series of transformations of the allene moiety. By applying this reaction as the key step, the total syntheses of naturally occurring allenic aromatic ethers, eucalyptene and terricollene A (first synthesis; 4.5 g gram scale), have been accomplished.

Low-Temperature Nickel-Catalyzed C-N Cross-Coupling via Kinetic Resolution Enabled by a Bulky and Flexible Chiral N-Heterocyclic Carbene Ligand

The transition-metal-catalyzed C-N cross-coupling has revolutionized the construction of amines. Despite the innovations of multiple generations of ligands to modulate the reactivity of the metal center, ligands for the low-temperature enantioselective amination of aryl halides remain a coveted target of catalyst engineering. Designs that promote one elementary reaction often create bottlenecks at other steps. We here report an unprecedented low-temperature (as low as -50 °C), enantioselective Ni-catalyzed C-N cross-coupling of aryl chlorides with sterically hindered secondary amines via a kinetic resolution process (s factor up to >300). A bulky yet flexible chiral N-heterocyclic carbene (NHC) ligand is leveraged to drive both oxidative addition and reductive elimination with low barriers and control the enantioselectivity. Computational studies indicate that the rotations of multiple σ-bonds on the C₂ -symmetric chiral ligand adapt to the changing needs of catalytic processes. We expect this design would be widely applicable to diverse transition states to achieve other challenging metal-catalyzed asymmetric cross-coupling reactions.

Room-Temperature Amination of Chloroheteroarenes in Water by a Recyclable Copper(II)-Phosphaadamantanium Sulfonate System

Buchwald-Hartwig amination of chloroheteroarenes has been a challenging synthetic process, with very few protocols promoting this important transformation at ambient temperature. The current report discusses about an efficient copper-based catalytic system (Cu/PTABS) for the amination of chloroheteroarenes at ambient temperature in water as the sole reaction solvent, a combination that is first to be reported. A wide variety of chloroheteroarenes could be coupled efficiently with primary and secondary amines as well as selected amino acid esters under mild reaction conditions. Catalytic efficiency of the developed protocol also promotes late-stage functionalization of active pharmaceutical ingredients (APIs) such as antibiotics (floxacins) and anticancer drugs. The catalytic system also performs efficiently at a very low concentration of 0.0001 mol % (TON = 980,000) and can be recycled 12 times without any appreciable loss in activity. Theoretical calculations reveal that the π-acceptor ability of the ligand PTABS is the main reason for the appreciably high reactivity of the catalytic system. Preliminary characterization of the catalytic species in the reaction was carried out using UV-VIS and ESR spectroscopy, providing evidence for the Cu(II) oxidation state.

Recent developments in decarboxylative C(aryl)-X bond formation from (hetero)aryl carboxylic acids

Decarboxylative coupling reactions using readily available (hetero)aryl carboxylic acids are a highly efficient approach for the formation of new C-C and C-X bonds. These decarboxylative coupling reactions eliminate CO2 as a by-product, resulting in a greener and environmentally more benign approach than conventional coupling reactions. In this review, we summarize the recent developments in ipso-decarboxylative C-X (X = O/N/halo/S/Se/P/CN) bond formations using (hetero)aryl carboxylic acids. Furthermore, we highlight the current limitations and future research opportunities of aryl-decarboxylative coupling reactions.

Copper nanoparticle anchored biguanidine-modified Zr-UiO-66 MOFs: a competent heterogeneous and reusable nanocatalyst in Buchwald-Hartwig and Ullmann type coupling reactions

We have designed a functionalized metal-organic framework (MOF) of UiO topology as a support, with an extremely high surface area, adjustable pore sizes and stable crystalline coordination polymeric structure and implanted copper (Cu) nanoparticles thereon. The core three dimensional Zr-derived MOF (UiO-66-NH2) was modified with a biguanidine moiety following a covalent post-functionalization approach. The morphological and physicochemical features of the material were determined using analytical methods such as FT-IR, SEM, TEM, EDX, atomic mapping, XRD and ICP-OES. The SEM and XRD results justified the unaffected morphology of Zr-MOF after structural modifications. The as-synthesized UiO-66-biguanidine/Cu nanocomposite was catalytically explored in the aryl and heteroaryl Buchwald-Hartwig C-N and Ullmann type C-O cross coupling reactions with excellent yields. A library of biaryl amine and biaryl ethers was synthesized over the catalyst under mild and green conditions. Furthermore, the catalyst was isolated by centrifugation and recycled 11 times with no significant copper leaching or change in its activity.

QTMP, a Novel Thiourea Polymer, Causes DNA Damage to Exert Anticancer Activity and Overcome Multidrug Resistance in Colorectal Cancer Cells

Colorectal cancer (CRC) is one of the most common malignancies, and multidrug resistance (MDR) severely restricts the effectiveness of various anticancer drugs. Therefore, the development of novel anticancer drugs for the treatment of CRC patients with MDR is necessary. Quaternized thiourea main-chain polymer (QTMP) is a self-assembled nanoparticle with good water solubility. Notably, QTMP is not a P-glycoprotein (P-gp) substrate, and it exhibits potent cytotoxic activity against CRC cells, including HCT116/DDP and P-gp-mediated multidrug-resistant Caco2 cells. QTMP also exhibits a strong anticancer activity against SW480 cells in vivo. Interestingly, reactive oxygen species (ROS) and reactive nitrogen species (RNS) production were increased in a concentration-dependent manner in QTMP-treated HCT116, SW480 and Caco2 cells. Importantly, QTMP causes DNA damage in these CRC cells via direct insertion into the DNA or regulation of ROS and/or RNS production. QTMP also induces caspase-dependent apoptosis via overproduction of ROS and RNS. Therefore, QTMP is a promising anticancer therapeutic agent for patients with CRC, including those cancer cells with P-gp-mediated MDR. The present study also indicates that the design and synthesis of anticancer drugs based on thiourea polymers is promising and valuable, thereby offering a new strategy to address MDR, and provides reference resources for further investigations of thiourea polymers.

Rhodium-terpyridine Catalyzed Transfer Hydrogenation of Aromatic Nitro Compounds in Water

A rhodium terpyridine complex catalyzed transfer hydrogenation of nitroarenes to anilines with i-PrOH as hydrogen source and water as solvent has been developed. The catalytic system can work at a substrate/catalyst (S/C) ratio of 2000, with a turnover frequency (TOF) up to 3360 h^-1 , which represents one of the most active catalytic transfer hydrogenation systems for nitroarene reduction. The catalytic system is operationally simple and the protocol could be scaled up to 20 gram scale. The water-soluble catalyst bearing a carboxyl group could be recycled 15 times without significant loss of activity.

Synthesis of 10-O-aryl-substituted berberine derivatives by Chan-Evans-Lam coupling and investigation of their DNA-binding properties

Eleven novel 10-O-aryl-substituted berberrubine and berberine derivatives were synthesized by the Cu²⁺-catalyzed Chan–Evans–Lam coupling of berberrubine with arylboronic acids and subsequent 9-O-methylation. The reaction is likely introduced by the Cu²⁺-induced demethylation of berberrubine and subsequent arylation of the resulting 10-oxyanion functionality. Thus, this synthetic route represents the first successful Cu-mediated coupling reaction of berberine substrates. The DNA-binding properties of the 10-O-arylberberine derivatives with duplex and quadruplex DNA were studied by thermal DNA denaturation experiments, spectrometric titrations as well as CD and LD spectroscopy. Fluorimetric DNA melting analysis with different types of quadruplex DNA revealed a moderate stabilization of the telomeric quadruplex-forming oligonucleotide sequence G₃(TTAG₃)₃. The derivatives showed a moderate affinity towards quadruplex DNA (K_b = 5–9 × 10⁵ M⁻¹) and ct DNA (K_b = 3–5 × 10⁴ M⁻¹) and exhibited a fluorescence light-up effect upon complexation to both DNA forms, with slightly higher intensity in the presence of the quadruplex DNA. Furthermore, the CD- and LD-spectroscopic studies revealed that the title compounds intercalate into ct DNA and bind to G4-DNA by terminal stacking.

A Dicopper Nitrenoid by Oxidation of a CuICuI Core: Synthesis, Electronic Structure, and Reactivity

A dicopper nitrenoid complex was prepared by formal oxidative addition of the nitrenoid fragment to a dicopper(I) center by reaction with the iminoiodinane PhINTs (Ts = tosylate). This nitrenoid complex, (DPFN)Cu₂(μ-NTs)[NTf₂]₂ (DPFN = 2,7-bis(fluorodi(2-pyridyl)methyl)-1,8-naphthyridine), is a powerful H atom abstractor that reacts with a range of strong C-H bonds to form a mixed-valence Cu(I)/Cu(II) μ-NHTs amido complex in the first example of a clean H atom transfer to a dicopper nitrenoid core. In line with this reactivity, DFT calculations reveal that the nitrenoid is best described as an iminyl (NR radical anion) complex. The nitrenoid was trapped by the addition of water to form a mixed-donor hydroxo/amido dicopper(II) complex, which was independently obtained by reaction of a Cu₂(μ-OH)₂ complex with an amine through a protonolysis pathway. This mixed-donor complex is an analogue for the proposed intermediate in copper-catalyzed Chan-Evans-Lam coupling, which proceeds via C-X (X = N or O) bond formation. Treatment of the dicopper(II) mixed donor complex with MgPh₂(THF)₂ resulted in generation of a mixture that includes both phenol and a previously reported dicopper(I) bridging phenyl complex, illustrating that both reduction of dicopper(II) to dicopper(I) and concomitant C-X bond formation are feasible.

Catalytic Synthesis of Atropisomeric o-Terphenyls with 1,2-Diaxes via Axial-to-Axial Diastereoinduction

Herein, we report a modular and convergent strategy for the assembly of atropisomeric o-terphenyls with 1,2-diaxes via palladium/chiral norbornene cooperative catalysis and axial-to-axial diastereoinduction. Readily available aryl iodides, 2,6-substituted aryl bromides, and potassium aryl trifluoroborates are used as the building blocks, laying the foundation for diversity-oriented synthesis of these scaffolds (46 examples). Other features include the unique axial-to-axial diastereoinduction mode, construction of two axes in a single operation, and step economy. DFT calculations are performed to rationalize the axial-to-axial diastereoinduction process. Synthetic utilities of this method in preparation of atropisomeric oligophenyls, chiral catalysts, and ligands are demonstrated.

Domino C-N Bond Formation via a Palladacycle with Diaziridinone. An Approach to Indolo[3,2-b]indoles

Palladium-catalyzed C-N bond formation is one of the widely used transformations for the synthesis of structurally diverse N-heterocycles. This work describes an efficient palladium-catalyzed multiple-C-N bond formation reaction for the synthesis of highly π-conjugated N-heterocycles, indolo[3,2-b]indoles with di-tert-butyldiaziridinone. The reaction likely proceeds through the initial formation of an indole-fused palladacycle by nucleophilic aminopalladation and subsequent bisamination to give indolo[3,2-b]indoles.

Copper-Catalyzed Lactamization of (E)-2-(2-Bromophenyl)-3-arylacrylamides for the Synthesis of (E)-3-Arylideneindolin-2-ones

A copper-catalyzed, ligand-free intramolecular C-N coupling of (E)-2-(2-bromophenyl)-3-arylacrylamides has been developed. This protocol provides an efficient and practical synthetic route for the biologically important (E)-3-arylideneindolin-2-ones from o-bromophenylacetic acids and aromatic or conjugated alkenyl aldehydes. Readily available starting materials, mild and noble metal-free conditions, high efficiency, and good tolerability for phenolic hydroxyl groups make this approach attractive and applicable.

Ligand-free copper-catalyzed C(sp3)-H imidation of aromatic and aliphatic methyl sulfides with N-fluorobenzenesulfonimide

A novel and efficient process has been developed for copper-catalyzed C(sp3)-H direct imidation of methyl sulfides with N-fluorobenzenesulfonimide(NFSI). Without using any ligands, various methyl sulfides including aromatic and aliphatic methyl sulfides, can be transformed to the corresponding N-((phenylthio)methyl)-benzenesulfonamide derivatives in good to excellent yields.

Assembly of α-(Hetero)aryl Nitriles via Copper-Catalyzed Coupling Reactions with (Hetero)aryl Chlorides and Bromides

α-(Hetero)aryl nitriles are important structural motifs for pharmaceutical design. The known methods for direct synthesis of these compounds via coupling with (hetero)aryl halides suffer from narrow reaction scope. Herein, we report that the combination of copper salts and oxalic diamides enables the coupling of a variety of (hetero)aryl halides (Cl, Br) and ethyl cyanoacetate under mild conditions, affording α-(hetero)arylacetonitriles via one-pot decarboxylation. Additionally, the CuBr/oxalic diamide catalyzed coupling of (hetero)aryl bromides with α-alkyl-substituted ethyl cyanoacetates proceeds smoothly at 60 °C, leading to the formation of α-alkyl (hetero)arylacetonitriles after decarboxylation. The method features a general substrate scope and is compatible with various functionalities and heteroaryls.