Lessons from the lysozyme of phage T4

Contribution of hydrophobic interactions to protein stability

Our goal was to gain a better understanding of the contribution of hydrophobic interactions to protein stability. We measured the change in conformational stability, Δ(ΔG), for hydrophobic mutants of four proteins: villin headpiece subdomain (VHP) with 36 residues, a surface protein from Borrelia burgdorferi (VlsE) with 341 residues, and two proteins previously studied in our laboratory, ribonucleases Sa and T1. We compared our results with those of previous studies and reached the following conclusions: (1) Hydrophobic interactions contribute less to the stability of a small protein, VHP (0.6±0.3 kcal/mol per -CH(2)- group), than to the stability of a large protein, VlsE (1.6±0.3 kcal/mol per -CH(2)- group). (2) Hydrophobic interactions make the major contribution to the stability of VHP (40 kcal/mol) and the major contributors are (in kilocalories per mole) Phe18 (3.9), Met13 (3.1), Phe7 (2.9), Phe11 (2.7), and Leu21 (2.7). (3) Based on the Δ(ΔG) values for 148 hydrophobic mutants in 13 proteins, burying a -CH(2)- group on folding contributes, on average, 1.1±0.5 kcal/mol to protein stability. (4) The experimental Δ(ΔG) values for aliphatic side chains (Ala, Val, Ile, and Leu) are in good agreement with their ΔG(tr) values from water to cyclohexane. (5) For 22 proteins with 36 to 534 residues, hydrophobic interactions contribute 60±4% and hydrogen bonds contribute 40±4% to protein stability. (6) Conformational entropy contributes about 2.4 kcal/mol per residue to protein instability. The globular conformation of proteins is stabilized predominantly by hydrophobic interactions.

Functional analysis of a novel motif conserved across geminivirus Rep proteins

Members of the Geminiviridae have single-stranded DNA genomes that replicate in nuclei of infected plant cells. All geminiviruses encode a conserved protein (Rep) that catalyzes initiation of rolling-circle replication. Earlier studies showed that three conserved motifs-motifs I, II, and III-in the N termini of geminivirus Rep proteins are essential for function. In this study, we identified a fourth sequence, designated GRS (geminivirus Rep sequence), in the Rep N terminus that displays high amino acid sequence conservation across all geminivirus genera. Using the Rep protein of Tomato golden mosaic virus (TGMV AL1), we show that GRS mutants are not infectious in plants and do not support viral genome replication in tobacco protoplasts. GRS mutants are competent for protein-protein interactions and for both double- and single-stranded DNA binding, indicating that the mutations did not impair its global conformation. In contrast, GRS mutants are unable to specifically cleave single-stranded DNA, which is required to initiate rolling-circle replication. Interestingly, the Rep proteins of phytoplasmal and algal plasmids also contain GRS-related sequences. Modeling of the TGMV AL1 N terminus suggested that GRS mutations alter the relative positioning of motif II, which coordinates metal ions, and motif III, which contains the tyrosine involved in DNA cleavage. Together, these results established that the GRS is a conserved, essential motif characteristic of an ancient lineage of rolling-circle initiators and support the idea that geminiviruses may have evolved from plasmids associated with phytoplasma or algae.

Discovery of biphasic thermal unfolding of ompc with implications for surface loop stability

Escherichia coli outer membrane protein C (osmoporin) is a close homologue of OmpF or matrix porin, expressed under conditions of high osmolarity or ionic strength. Despite the fact that the proteins display very similar structures (rmsd = 0.78 Å), the channel activities (gating or selectivity) of the two proteins are markedly different, and compared to OmpF, there is much less published information about the stability and folding of OmpC. In this paper, we report a structural study of nine OmpC mutations that affect channel size and voltage gating. The secondary and tertiary structural analysis by circular dichroism (CD) indicated that the single-amino acid substitutions have little impact on the protein fold. However, a thermal denaturation study using CD and differential scanning calorimetry shows that different mutations lead to varied levels of destabilization, with the largest showing a 15 °C lower T(m) than the wild type and a 40% reduction in ΔH(cal). CD thermal denaturation measurements revealed that OmpC unfolds in a biphasic process, in which only the second phase is affected by the known mutations. The first stage of unfolding was shown to be reversible and separate from the main unfolding and loss of trimeric structure occurring in the second phase, leaving the flexible extracellular loops as the likely site of unfolding. The first phase is abolished as OmpC becomes more stable at lower pH.

Regulation of a phage endolysin by disulfide caging

In contrast to canonical phage endolysins, which require holin-mediated disruption of the membrane to gain access to attack the cell wall, signal anchor release (SAR) endolysins are secreted by the host sec system, where they accumulate in an inactive form tethered to the membrane by their N-terminal SAR domains. SAR endolysins become activated by various mechanisms upon release from the membrane. In its inactive form, the prototype SAR endolysin, Lyz(P1), of coliphage P1, has an active-site Cys covalently blocked by a disulfide bond; activation involves a disulfide bond isomerization driven by a thiol in the newly released SAR domain, unblocking the active-site Cys. Here, we report that Lyz(103), the endolysin of Erwinia phage ERA103, is also a SAR endolysin. Although Lyz(103) does not have a catalytic Cys, genetic evidence suggests that it also is activated by a thiol-disulfide isomerization triggered by a thiol in the SAR domain. In this case, the inhibitory disulfide in nascent Lyz(103) is formed between cysteine residues flanking a catalytic glutamate, caging the active site. Thus, Lyz(P1) and Lyz(103) define subclasses of SAR endolysins that differ in the nature of their inhibitory disulfide, and Lyz(103) is the first enzyme found to be regulated by disulfide bond caging of its active site.

Rapid collapse into a molten globule is followed by simple two-state kinetics in the folding of lysozyme from bacteriophage λ

Stopped-flow fluorescence and circular dichroism spectroscopy have been used in combination with quenched-flow hydrogen exchange labeling, monitored by two-dimensional NMR and electrospray ionization mass spectrometry, to investigate the folding kinetics of lysozyme from bacteriophage λ (λ lysozyme) at pH 5.6, 20 °C. The first step in the folding of λ lysozyme occurs very rapidly (τ < 1 ms) after refolding is initiated and involves both hydrophobic collapse and formation of a high content of secondary structure but only weak protection from (1)H/(2)H exchange and no fixed tertiary structure organization. This early folding step is reflected in the dead-time events observed in the far-UV CD and ANS fluorescence experiments. Following accumulation of this kinetic molten globule species, the secondary structural elements are stabilized and the majority (ca. 88%) of refolding molecules acquire native-like properties in a highly cooperative two-state process, with τ = 0.15 ± 0.03 s. This is accompanied by the acquisition of substantial native-like protection from hydrogen exchange. A double-mixing experiment and the absence of a denaturant effect reveal that slow (τ = 5 ± 1 s) folding of the remaining (ca. 12%) molecules is rate limited by the cis/trans isomerization of prolines that are trans in the folded enzyme. In addition, native state hydrogen exchange and classical denaturant unfolding experiments have been used to characterize the thermodynamic properties of the enzyme. In good agreement with previous crystallographic evidence, our results show that λ lysozyme is a highly dynamic protein, with relatively low conformational stability (ΔG°(N-U) = 25 ± 2 kJ·mol(-1)).

Bunching effect in single-molecule T4 lysozyme nonequilibrium conformational dynamics under enzymatic reactions

The bunching effect, implying that conformational motion times tend to bunch in a finite and narrow time window, is observed and identified to be associated with substrate-enzyme complex formation in T4 lysozyme conformational dynamics under enzymatic reactions. Using single-molecule fluorescence spectroscopy, we have probed T4 lysozyme conformational motions under the hydrolysis reaction of polysaccharide of E. coli B cell walls by monitoring the fluorescence resonant energy transfer (FRET) between a donor-acceptor probe pair tethered to T4 lysozyme domains involving open-close hinge-bending motions. On the basis of the single-molecule spectroscopic results, molecular dynamics simulation, and a random walk model analysis, multiple intermediate states have been estimated in the evolution of T4 lysozyme enzymatic reaction active complex formation (Chen, Y.; Hu, D.; Vorpagel, E. R.; Lu, H. P. Probing single-molecule T4 lysozyme conformational dynamics by intramolecular fluorescence energy transfer. J. Phys. Chem. B 2003, 107, 7947-7956). In this Article, we report progress on the analysis of the reported experimental results, and we have identified the bunching effect of the substrate-enzyme active complex formation time in T4 lysozyme enzymatic reactions. We show that the bunching effect, a dynamic behavior observed for the catalytic hinge-bending conformational motions of T4 lysozyme, is a convoluted outcome of multiple consecutive Poisson rate processes that are defined by protein functional motions under substrate-enzyme interactions; i.e., convoluted multiple Poisson rate processes give rise to the bunching effect in the enzymatic reaction dynamics. We suggest that the bunching effect is likely common in protein conformational dynamics involved in conformation-gated protein functions.