151
|
Grieshaber D, MacKenzie R, Vörös J, Reimhult E. Electrochemical Biosensors - Sensor Principles and Architectures. SENSORS (BASEL, SWITZERLAND) 2008; 8:1400-1458. [PMID: 27879772 PMCID: PMC3663003 DOI: 10.3390/s80314000] [Citation(s) in RCA: 757] [Impact Index Per Article: 47.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/23/2008] [Accepted: 01/28/2008] [Indexed: 11/16/2022]
Abstract
Quantification of biological or biochemical processes are of utmost importance for medical, biological and biotechnological applications. However, converting the biological information to an easily processed electronic signal is challenging due to the complexity of connecting an electronic device directly to a biological environment. Electrochemical biosensors provide an attractive means to analyze the content of a biological sample due to the direct conversion of a biological event to an electronic signal. Over the past decades several sensing concepts and related devices have been developed. In this review, the most common traditional techniques, such as cyclic voltammetry, chronoamperometry, chronopotentiometry, impedance spectroscopy, and various field-effect transistor based methods are presented along with selected promising novel approaches, such as nanowire or magnetic nanoparticle-based biosensing. Additional measurement techniques, which have been shown useful in combination with electrochemical detection, are also summarized, such as the electrochemical versions of surface plasmon resonance, optical waveguide lightmode spectroscopy, ellipsometry, quartz crystal microbalance, and scanning probe microscopy. The signal transduction and the general performance of electrochemical sensors are often determined by the surface architectures that connect the sensing element to the biological sample at the nanometer scale. The most common surface modification techniques, the various electrochemical transduction mechanisms, and the choice of the recognition receptor molecules all influence the ultimate sensitivity of the sensor. New nanotechnology-based approaches, such as the use of engineered ion-channels in lipid bilayers, the encapsulation of enzymes into vesicles, polymersomes, or polyelectrolyte capsules provide additional possibilities for signal amplification. In particular, this review highlights the importance of the precise control over the delicate interplay between surface nano-architectures, surface functionalization and the chosen sensor transducer principle, as well as the usefulness of complementary characterization tools to interpret and to optimize the sensor response.
Collapse
Affiliation(s)
- Dorothee Grieshaber
- Laboratory of Biosensors and Bioelectronics, Institute for Biomedical Engineering, ETH Zurich, Gloriastrasse 35, 8092 Zurich, Switzerland.
| | - Robert MacKenzie
- Laboratory of Biosensors and Bioelectronics, Institute for Biomedical Engineering, ETH Zurich, Gloriastrasse 35, 8092 Zurich, Switzerland.
| | - Janos Vörös
- Laboratory of Biosensors and Bioelectronics, Institute for Biomedical Engineering, ETH Zurich, Gloriastrasse 35, 8092 Zurich, Switzerland.
| | - Erik Reimhult
- Laboratory for Surface Science and Technology, Department of Materials, ETH Zurich, Wolfgang-Pauli-Strasse 10, 8093 Zurich, Switzerland.
| |
Collapse
|
152
|
Brunot C, Grosgogeat B, Picart C, Lagneau C, Jaffrezic-Renault N, Ponsonnet L. Response of fibroblast activity and polyelectrolyte multilayer films coating titanium. Dent Mater 2008; 24:1025-35. [PMID: 18237774 DOI: 10.1016/j.dental.2007.11.022] [Citation(s) in RCA: 41] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/06/2006] [Revised: 06/07/2007] [Accepted: 11/21/2007] [Indexed: 11/17/2022]
Abstract
OBJECTIVES The study of surface properties is a recent and crucial issue in the biomaterial fields applied to Odontology. The reference biomaterial in dental implantology is titanium. The principal objective is a perfect bio-integration in the oral ecosystem, both in terms of mucosal and bone tissues. The aim of this work was to optimize the tissue-titanium interface by applying polyelectrolyte multilayer films on the surface of titanium. METHODS The experimental study was undertaken on pure titanium samples. Two types of film ending with polycations or polyanions were selected. Both film types were built with a first poly(ethyleneimine) (PEI) base layer and composed either of poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) or of hyaluronic acid (HA) and poly(l-lysine) (PLL) layers. Final architectures were as follows: PEI-(PSS/PAH)(10), or PEI-(PSS/PAH)(10)-PSS, or chemically cross-linked PEI-(HA/PLL)(10) or PEI-(HA/PLL)(10)-HA. An analysis of the physicochemical characteristics of the surfaces was carried out by tensiometry measurements (dynamic contact angle, wettability, contact angle hysteresis) and atomic force microscopy. A biological study with human fibroblasts was followed over a 7-day culture period at days 0, 2, 4 and 7 to observe the cellular response in terms of morphology (scanning electron microscopy) and viability (Mosmann's test). RESULTS The results showed that polyelectrolyte multilayer films could be successfully deposited onto titanium as previously described for glass or composite. Fibroblast adhesion and proliferation was strongly dependent on film type. SEM observations of cells on the different films agreed with the viability cell test. Furthermore, films containing PSS/PAH generated a better cellular response than films containing cross-linked HA/PLL. CONCLUSION PSS/PAH polyelectrolyte films coating titanium could represent a new approach for oral bio-integration with great potential for clinical application in the fields of dental implantology. More particularly, the specific biofunctionalization of PSS/PAH films coating titanium could be envisioned by introducing layers of molecules that encourage the bio-integration process between the films.
Collapse
Affiliation(s)
- C Brunot
- Laboratoire des Multimatériaux et des Interfaces, UMR CNRS 5615, Université de Lyon, Université Lyon 1, Faculté d'Odontologie, Rue Guillaume Paradin, F-69372 Lyon Cedex 08, France.
| | | | | | | | | | | |
Collapse
|
153
|
Yuan W, Ji J, Fu J, Shen J. A facile method to construct hybrid multilayered films as a strong and multifunctional antibacterial coating. J Biomed Mater Res B Appl Biomater 2008; 85:556-63. [DOI: 10.1002/jbm.b.30979] [Citation(s) in RCA: 69] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
154
|
Wattendorf U, Kreft O, Textor M, Sukhorukov GB, Merkle HP. Stable Stealth Function for Hollow Polyelectrolyte Microcapsules through a Poly(ethylene glycol) Grafted Polyelectrolyte Adlayer. Biomacromolecules 2007; 9:100-8. [DOI: 10.1021/bm700857s] [Citation(s) in RCA: 99] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Uta Wattendorf
- Institute for Pharmaceutical Sciences, ETH Zurich, 8093 Zurich, Switzerland, Max-Planck Institute of Colloids and Interfaces, Research Campus Golm, 14424 Potsdam, Germany, Laboratory for Surface Science and Technology, ETH Zurich, 8093 Zurich, Switzerland, and Department of Materials, Queen Mary University of London, Mile End Road, E1 4NS, London, U.K
| | - Oliver Kreft
- Institute for Pharmaceutical Sciences, ETH Zurich, 8093 Zurich, Switzerland, Max-Planck Institute of Colloids and Interfaces, Research Campus Golm, 14424 Potsdam, Germany, Laboratory for Surface Science and Technology, ETH Zurich, 8093 Zurich, Switzerland, and Department of Materials, Queen Mary University of London, Mile End Road, E1 4NS, London, U.K
| | - Marcus Textor
- Institute for Pharmaceutical Sciences, ETH Zurich, 8093 Zurich, Switzerland, Max-Planck Institute of Colloids and Interfaces, Research Campus Golm, 14424 Potsdam, Germany, Laboratory for Surface Science and Technology, ETH Zurich, 8093 Zurich, Switzerland, and Department of Materials, Queen Mary University of London, Mile End Road, E1 4NS, London, U.K
| | - Gleb B. Sukhorukov
- Institute for Pharmaceutical Sciences, ETH Zurich, 8093 Zurich, Switzerland, Max-Planck Institute of Colloids and Interfaces, Research Campus Golm, 14424 Potsdam, Germany, Laboratory for Surface Science and Technology, ETH Zurich, 8093 Zurich, Switzerland, and Department of Materials, Queen Mary University of London, Mile End Road, E1 4NS, London, U.K
| | - Hans P. Merkle
- Institute for Pharmaceutical Sciences, ETH Zurich, 8093 Zurich, Switzerland, Max-Planck Institute of Colloids and Interfaces, Research Campus Golm, 14424 Potsdam, Germany, Laboratory for Surface Science and Technology, ETH Zurich, 8093 Zurich, Switzerland, and Department of Materials, Queen Mary University of London, Mile End Road, E1 4NS, London, U.K
| |
Collapse
|
155
|
Ciobanu M, Heurtault B, Schultz P, Ruhlmann C, Muller CD, Frisch B. Layersome: Development and optimization of stable liposomes as drug delivery system. Int J Pharm 2007; 344:154-7. [PMID: 17616287 DOI: 10.1016/j.ijpharm.2007.05.037] [Citation(s) in RCA: 44] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/13/2007] [Revised: 05/15/2007] [Accepted: 05/18/2007] [Indexed: 11/27/2022]
Abstract
This paper describes the development of stable drug delivery systems named layersomes. The layersomes are conventional liposomes coated with one or multiple layers of biocompatible polyelectrolytes in order to stabilise their structure. The formulation strategy is based on an alternative coating procedure of positive poly(lysine) (pLL) and negative poly(glutamic acid) (pGA) polypeptides on initially charged small unilamellar liposomes (SUVs). The size distribution and the zeta potential of the final entity depend on the number of polyelectrolyte layers and the charge of the last coating layer. Morphological studies were achieved by flux cytometry and cryo electron microscopy. Release studies of encapsulated hydrophilic 5(6)-carboxyfluorescein (5,6CF) in the presence of Triton or ethanol showed an increased membrane resistance of the layersomes compared to classical SUVs. Finally, encapsulation of piroxicam (PX) was performed with success.
Collapse
Affiliation(s)
- M Ciobanu
- UMR 7175 LC01 CNRS/ULP, Faculté de Pharmacie, 74 route du Rhin, 67400 Illkirch, France
| | | | | | | | | | | |
Collapse
|
156
|
Zhang F, Wu Q, Chen ZC, Zhang M, Lin XF. Hepatic-targeting microcapsules construction by self-assembly of bioactive galactose-branched polyelectrolyte for controlled drug release system. J Colloid Interface Sci 2007; 317:477-84. [PMID: 17931643 DOI: 10.1016/j.jcis.2007.09.065] [Citation(s) in RCA: 39] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2007] [Revised: 09/18/2007] [Accepted: 09/20/2007] [Indexed: 12/18/2022]
Abstract
We describe the construction of hepatic-targeting microcapsules by self-assembly of chemo-enzymatic synthesized poly(vinyl galactose ester-co-methacryloxyethyl trimethylammonium chloride) (PGEDMC) containing galactose branches, which can be specifically recognized by membrane bound galactose receptors (ASGPR), for acyclovir (ACV) controlled release system. Alternate deposition of PGEDMC and poly(sodium 4-styrenesulfonate) (PSS) was carried out on ACV microcrystals. It was revealed that the drug release rate decreases with the increase of coated layer number and a microcapsule-drying treatment would enhance the sustained release effect probably because of a multilayer shrink and tightness during the process. The complete release of ACV yielded a hollow PGEDMC/PSS multilayered network with favorable integrity and nano-thickness by TEM and SEM. The potential targetability of the system was proved in vitro by PNA lectin recognition. Lectin hardly adsorbed on the film where the outmost layer was a polyanion or a polycation without galactose component. Whilst the galactose-containing layer (PGEDMC) was the outmost layer, a significant lectin combination was observed. This technique could provide a promising way to encapsulate and deliver various target substances in biological and pharmaceutical applications.
Collapse
Affiliation(s)
- Fu Zhang
- Department of Chemistry, Zhejiang University, Hangzhou 310027, People's Republic of China
| | | | | | | | | |
Collapse
|
157
|
Tedjo C, Neoh KG, Kang ET, Fang N, Chan V. Bacteria-surface interaction in the presence of proteins and surface attached poly(ethylene glycol) methacrylate chains. J Biomed Mater Res A 2007; 82:479-91. [PMID: 17295255 DOI: 10.1002/jbm.a.31172] [Citation(s) in RCA: 41] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
This study analyzes the adhesion behavior of the gram positive bacteria, Staphylococcus aureus (S. aureus), and the gram negative bacteria, Escherichia coli (E. coli), on polypyrrole (PPY) surfaces in the presence of poly(ethylene glycol) methacrylate (PEGMA) chains and plasma proteins (bovine serum albumin and bovine plasma fibrinogen) either preadsorbed on the film surface or in the bacterial suspension. Bacterial adhesion experiments performed in a suspension of bacterial cells and protein may give important insights on the behavior of bacterial adhesion in an in vivo environment. Protein adsorption and bacterial adhesion on PEGMA-grafted PPY films were reduced by about a factor of 2-4 compared with those on the pristine PPY films. In addition, the number of bacterial cells adhering on the substrate is dependent not only on the type of protein present, but also the sequence of exposure to the protein relative to the bacteria. Furthermore, bacteria-surface adhesion force was measured using the atomic force microscopy with increasing lateral force to detach the individual cell. The adhesion force of S. aureus is influenced by PEGMA and plasma protein modification and is significantly higher than that of E. coli for all substrates tested. The number of adherent cells on the substrate is shown to be directly correlated to the bacterial adhesion force.
Collapse
Affiliation(s)
- Chrysanty Tedjo
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Kent Ridge, Singapore 119260
| | | | | | | | | |
Collapse
|
158
|
Saldarriaga Fernández IC, van der Mei HC, Lochhead MJ, Grainger DW, Busscher HJ. The inhibition of the adhesion of clinically isolated bacterial strains on multi-component cross-linked poly(ethylene glycol)-based polymer coatings. Biomaterials 2007; 28:4105-12. [PMID: 17573108 DOI: 10.1016/j.biomaterials.2007.05.023] [Citation(s) in RCA: 79] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2007] [Accepted: 05/25/2007] [Indexed: 11/24/2022]
Abstract
This study examined bacterial adhesion to a new multi-component cross-linked poly(ethylene glycol)-based polymer coating that can be applied by spin-coating or spraying onto diverse biomaterials. Adhesion of five clinically isolated bacterial strains involved in biomaterial-centered infections were studied in a parallel-plate flow chamber at different shear rates and after exposure of the coating to different physiological fluids. The new chemistry inhibits non-specific biomolecular and cell binding interactions. Relative to glass, the coating reduced adhesion of all strains used in this study by more than 80%, with the exception of Escherichia coli O2K2. Reductions in adhesion of Staphylococcus epidermidis 3,399 persisted beyond 168h exposure of the coatings to phosphate buffered saline or urine, but not after exposure to protein-rich fluids as saliva and blood plasma, despite evidence from X-ray photoelectron spectroscopy that the coating integrity was not affected by exposure to these fluids. We conclude that this new coating chemistry provides beneficial properties to prevent or hinder bacterial adhesion and colonization in applications where low protein-conditions prevail.
Collapse
Affiliation(s)
- Isabel C Saldarriaga Fernández
- Department of BioMedical Engineering, University Medical Center Groningen, University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands
| | | | | | | | | |
Collapse
|
159
|
Pradier CM, Humblot V, Stievano L, Méthivier C, Lambert JF. Salt concentration and pH-dependent adsorption of two polypeptides on planar and divided alumina surfaces. In situ IR investigations. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2007; 23:2463-71. [PMID: 17274633 DOI: 10.1021/la062208p] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2023]
Abstract
The adsorption of proteins is the first process to take place when a solid is immersed in a biological fluid; though not yet thoroughly understood at a molecular level, this process is also known to be strongly influenced by the presence of salt in solution or by pH changes. In the present work, poly-L-glutamic acid (PG) and poly-L-lysine (PL) were selected to mimic the behavior of some protein fragments. Their adsorption was investigated by infrared spectroscopy in various modes, both on planar and on divided (powder) surfaces of aluminum oxide. These two peptides were shown to have different behaviors when adsorbed from solutions with or without CaCl2 and at various pH values. Polarization modulation-reflection absorption infrared spectroscopy, applied in a special cell designed to characterize the solid surface in contact with the liquid, enabled the observation of the influence of pH and salts upon polypeptide adsorption. At pH values higher than 5 and in the presence of CaCl2 in solution, a net increase of the PG adsorbed amount is observed, whereas no such effect could be detected for PL. Specific interactions between the COO- groups on the side chains and the surface, or between those of two different molecules, was inferred. Interestingly, similar conclusions could be drawn for the surface of alumina powders contacted with solutions of PG and PL and characterized by attenuated total reflectance IR. This work demonstrates the potential for IR investigations of solid oxide-liquid interfaces combining the study of planar and finely divided surfaces.
Collapse
Affiliation(s)
- C M Pradier
- Laboratoire de Réactivité de Surface, CNRS UMR 7609, Université Pierre et Marie Curie, 4 place Jussieu, Case 178, 75252 Paris Cedex 05, France.
| | | | | | | | | |
Collapse
|
160
|
Brunot C, Ponsonnet L, Lagneau C, Farge P, Picart C, Grosgogeat B. Cytotoxicity of polyethyleneimine (PEI), precursor base layer of polyelectrolyte multilayer films. Biomaterials 2007; 28:632-40. [PMID: 17049374 DOI: 10.1016/j.biomaterials.2006.09.026] [Citation(s) in RCA: 162] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/07/2006] [Accepted: 09/20/2006] [Indexed: 11/17/2022]
Abstract
Polyethyleneimine (PEI) is a synthetic polymer commonly used as precursor base layer in polyelectrolyte multilayer films. However, the biological properties of this cationic macromolecule are poorly understood. The aim of this experimental investigation was to evaluate in vitro the biocompatibility of PEI towards two different human cell lines. The experimental investigation was undertaken on pure titanium (Ti) and nickel-titanium (NiTi) alloy samples with an average surface roughness of Ra=0.3microm. A biological study was undertaken at day 0 (2h after seeding), day 2, day 4 and day 7 to observe the cellular response of fibroblasts and osteoblasts cell lines in terms of morphology, adhesion (as observed by scanning electron microscopy), and viability (Mosmann's test). The results showed that PEI can be successfully deposited onto Ti or NiTi alloy, but generates a detrimental cellular response on both substrates as illustrated by a decrease of both fibroblast and osteoblast adhesion and proliferation over a 7-day culture period. These results suggest that PEI is potentially cytotoxic and may not be biocompatible enough in clinical applications using high molecular weight. As a consequence, polyelectrolyte multilayer films, which are promising in prosthesis and implantology fields, could not be coated with PEI at a high molecular weight. A lower molecular weight should be considered or a more biocompatible molecular base as precursor layer of polyelectrolyte multilayer films would be better to use for a good human bio-integration.
Collapse
Affiliation(s)
- Céline Brunot
- Laboratoire d'Etudes des Interfaces et des Biofilms en Odontologie EA637, Université Lyon1, Rue Guillaume Paradin 69372 Lyon Cedex 08, France.
| | | | | | | | | | | |
Collapse
|
161
|
Fu J, Ji J, Fan D, Shen J. Construction of antibacterial multilayer films containing nanosilver via layer-by-layer assembly of heparin and chitosan-silver ions complex. J Biomed Mater Res A 2007; 79:665-74. [PMID: 16832825 DOI: 10.1002/jbm.a.30819] [Citation(s) in RCA: 185] [Impact Index Per Article: 10.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
Antibacterial multilayer films containing nanosilver were prepared via layer-by-layer fashion. PET film was aminolyzed with 1,6-hexanediamine to introduce amino groups on PET film surface; chitosan-silver nitrate complex and heparin were alternately deposited onto an aminolyzed PET film surface, and subsequently, the silver ions within the multilayer films were reduced with ascorbic acid to form silver nanoparticles. UV-visible spectroscopy and transmission electron microscopy confirmed the formation of well-dispersed nanosilver particles with sizes (10-40 nm) that depended on the initial concentration of silver ions in chitosan solution and the pH of ascorbic acid solution. The chitosan/heparin multilayer films were possessed of bactericidal effect on Escherichia coli (E. coli), and this antibacterial effect could be significantly enhanced by the incorporation of silver nanoparticles into the multilayer films. The multilayer films containing nanosilver were not only effective as antibacterial but also as anticoagulant coating. And cell toxicity evaluation suggested that the multilayer films containing nanosilver did not show any cytotoxicity. The multilayer films containing nanosilver may have good potentials for surface modification of medical devices, especially for cardiovascular implants.
Collapse
Affiliation(s)
- Jinhong Fu
- Department of Polymer Science and Engineering, Key Laboratory of Macromolecule Synthesis and Functionalization of Minster of Education, Zhejiang University, Hangzhou 310027, China
| | | | | | | |
Collapse
|
162
|
Zoulalian V, Monge S, Zürcher S, Textor M, Robin JJ, Tosatti S. Functionalization of Titanium Oxide Surfaces by Means of Poly(alkyl-phosphonates). J Phys Chem B 2006; 110:25603-5. [PMID: 17181194 DOI: 10.1021/jp066811s] [Citation(s) in RCA: 53] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
The use of a multiple attachment sites strategy is considered in order to improve the stability of monomolecular adlayers. The hypothesis was tested in the case of PEG-ylated compounds carrying phosphonate groups, known for their affinity toward titanium oxide surfaces. As a result, a new class of co- and terpolymers were synthesized by free-radical polymerization of three different monomers: dialkyl(methacryloyloxyalkyl)phosphonates, PEG methyl ether methacrylate, and/or butyl methacrylate monomers. Adlayers were formed following a simple dip-and-rinse protocol using diluted aqueous polymer solutions and were characterized by evaluating their thicknesses with variable angle spectroscopic ellipsometry (VASE) and their elemental compositions with X-ray photoelectron spectroscopy (XPS). The same techniques were used to determine changes of the adlayer as a function of exposure to electrolytes at different pH values and to monitor nonspecific protein adsorption upon serum exposures. The results indicated that the poly(alkyl-phosphonate)-based adlayers combine multiple site attachment of phosphonic groups and presentation of PEG side chains to the aqueous environment, resulting in both improved stability over a wide pH range in comparison to the tested reference surfaces and excellent resistance to protein adsorption when exposed to full human serum.
Collapse
Affiliation(s)
- V Zoulalian
- Laboratory for Surface Science and Technology, ETH Zurich, CH-8093 Zurich, Switzerland
| | | | | | | | | | | |
Collapse
|
163
|
Li Z, Lee D, Sheng X, Cohen RE, Rubner MF. Two-level antibacterial coating with both release-killing and contact-killing capabilities. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2006; 22:9820-3. [PMID: 17106967 DOI: 10.1021/la0622166] [Citation(s) in RCA: 238] [Impact Index Per Article: 13.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
Using a combination of an aqueous layer-by-layer deposition technique, nanoparticle surface modification chemistry, and nanoreactor chemistry, we constructed thin film coatings with two distinct layered functional regions: a reservoir for the loading and release of bactericidal chemicals and a nanoparticle surface cap with immobilized bactericides. This results in dual-functional bactericidal coatings bearing both chemical-releasing bacteria-killing capacity and contact bacteria-killing capacity. These dual-functional coatings showed very high initial bacteria-killing efficiency due to the release of Ag ions and retained significant antibacterial activity after the depletion of embedded Ag because of the immobilized quaternary ammonium salts.
Collapse
Affiliation(s)
- Zhi Li
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, USA
| | | | | | | | | |
Collapse
|
164
|
Nehéz L, Tingstedt B, Vödrös D, Axelsson J, Lindman B, Andersson R. Novel treatment in peritoneal adhesion prevention: protection by polypeptides. Scand J Gastroenterol 2006; 41:1110-7. [PMID: 16938726 DOI: 10.1080/00365520600554550] [Citation(s) in RCA: 11] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
OBJECTIVE To evaluate a novel antiadhesive polypeptide complex containing a combination of poly-L-glutamate and poly-L-lysine in order to study its effectiveness and mechanisms in the prevention of postoperative abdominal adhesions in mice. MATERIAL AND METHODS The length of peritoneal adhesions was measured and expressed in percentage of the wound length in a standardized peritoneal injury model and evaluated 7 days and 4 weeks after adhesion induction. The test compound was administered intraperitoneally following surgery. Peritoneal swabs, including the wound area, were stained in order to determine the peritoneal location and clearance of the polypeptides. Electron microscopy was performed to analyze the wound surface and the ultra-structural changes of the phagocytes in cell culture. Moreover, flow cytometry was used to evaluate the effect on macrophage phagocytic function. RESULTS The poly-L-lysine and poly-L-glutamate combination significantly decreased peritoneal adhesions both at 7 days' (p < 0.001) and 4 weeks' (p < or = 0.001) follow-up. From the first day, the compound was found in the wound, after which this was gradually rebuilt, and covered with mesothelial cells. The macrophages phagocytosed the test compound particles, resulting in significant cell growth, and large phagocytic vacuoles. CONCLUSIONS The intraperitoneal administration of poly-L-lysine and poly-L-glutamate resulted in a significant decrease in experimental postoperative peritoneal adhesions.
Collapse
Affiliation(s)
- László Nehéz
- Department of Surgery, Center of Chemistry and Clinical Engineering, Lund University, Sweden
| | | | | | | | | | | |
Collapse
|
165
|
Vodouhê C, Le Guen E, Garza JM, Francius G, Déjugnat C, Ogier J, Schaaf P, Voegel JC, Lavalle P. Control of drug accessibility on functional polyelectrolyte multilayer films. Biomaterials 2006; 27:4149-56. [PMID: 16600366 DOI: 10.1016/j.biomaterials.2006.03.024] [Citation(s) in RCA: 80] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/01/2006] [Accepted: 03/16/2006] [Indexed: 11/25/2022]
Abstract
A surface coating based on polylysine/hyaluronic acid multilayers was designed and acted as a reservoir for an antiproliferative agent, paclitaxel (Taxol). Absolutely no chemical modification of polyelectrolytes or of the drug was needed and the final architecture was obtained in an extremely simple way using the layer-by-layer method. The paclitaxel dose available for human colonic adenocarcinoma cells HT29 seeded on the films could be finely tuned. Moreover, the accessibility of the drugs was controlled by adding on the top of the drug reservoir a capping made of synthetic polyelectrolyte multilayers. This capping was also required to allow adhesion of HT29 cells. Paclitaxel activity was maintained after embedding in the polyelectrolyte multilayers and cellular viability could be reduced by about 80% 96 h after seeding. The strategy described in this paper could be valuable for various other drug/cell systems.
Collapse
Affiliation(s)
- Constant Vodouhê
- INSERM Unité 595, 11 rue Humann, F-67085 Strasbourg Cedex, France.
| | | | | | | | | | | | | | | | | |
Collapse
|
166
|
Haynie DT, Zhang L, Rudra JS, Zhao W, Zhong Y, Palath N. Polypeptide multilayer films. Biomacromolecules 2006; 6:2895-913. [PMID: 16283705 DOI: 10.1021/bm050525p] [Citation(s) in RCA: 91] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
Abstract
Research on polypeptide multilayer films, coatings, and microcapsules is located at the intersection of several disciplines: synthetic polymer chemistry and physics, biomaterials science, and nanoscale engineering. The past few years have witnessed considerable growth in each of these areas. Unexplored territory has been found at the borders, and new possibilities for technology development are taking form from technological advances in polypeptide production, sequencing of the human genome, and the nature of peptides themselves. Most envisioned applications of polypeptide multilayers have a biomedical bent. Prospects seem no less positive, however, in fields ranging from food technology to environmental science. This review of the present state of polypeptide multilayer film research covers key points of polypeptides as materials, means of polymer production and film preparation, film characterization methods, focal points of current research in basic science, and the outlook for a few specific applications. In addition, it discusses how the study of polypeptide multilayer films could help to clarify the physical basis of assembly and stability of polyelectrolyte multilayers, and mention is made of similarities to protein folding studies.
Collapse
Affiliation(s)
- Donald T Haynie
- Bionanosystems Engineering Laboratory, Center for Applied Physics Studies, College of Engineering & Science, Louisiana Tech University, PO Box 10348, Ruston, Louisiana 71272, USA.
| | | | | | | | | | | |
Collapse
|
167
|
Lacík I. Polymer Chemistry in Diabetes Treatment by Encapsulated Islets of Langerhans: Review to 2006. Aust J Chem 2006. [DOI: 10.1071/ch06197] [Citation(s) in RCA: 36] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
Polymeric materials have been successfully used in numerous medical applications because of their diverse properties. For example, development of a bioartificial pancreas remains a challenge for polymer chemistry. Polymers, as a form of various encapsulation device, have been proposed for designing the semipermeable membrane capable of long-term immunoprotection of transplanted islets of Langerhans, which regulate the blood glucose level in a diabetic patient. This review describes the current situation in the field, discussing aspects of material selection, encapsulation devices, and encapsulation protocols. Problems and unanswered questions are emphasized to illustrate why clinical therapies with encapsulated islets have not been realized, despite intense activity over the past 15 years. The review was prepared with the goal to address professionals in the field as well as the broad polymer community to help in overcoming final barriers to the clinical phase for transplantation of islets of Langerhans encapsulated in a polymeric membrane.
Collapse
|
168
|
Dubas ST, Limsavarn L, Iamsamai C, Potiyaraj P. Assembly of polyelectrolyte multilayers on nylon fibers. J Appl Polym Sci 2006. [DOI: 10.1002/app.23826] [Citation(s) in RCA: 33] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
169
|
Snopok BA, Kostyukevich EV. Kinetic studies of protein–surface interactions: A two-stage model of surface-induced protein transitions in adsorbed biofilms. Anal Biochem 2006; 348:222-31. [PMID: 16356461 DOI: 10.1016/j.ab.2005.11.009] [Citation(s) in RCA: 35] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/23/2005] [Revised: 11/02/2005] [Accepted: 11/03/2005] [Indexed: 11/29/2022]
Abstract
The irreversible adsorption of proteins on artificial surfaces plays an important role in a wide variety of practical problems. The simple analytical models based on definite concepts regarding the mechanisms of interfacial evolution can be used efficiently for characterization of protein-surface interactions by analyzing the intrinsic kinetics of the process. In this article, analytical expressions are derived for the adsorption kinetics that take into account the presence of more than one adsorbed state for proteins in biofilms. It is shown that the experimentally observed dependence of the adsorbed mass on the concentration of protein in solution can be reproduced with this model, and the approach provides a rapid method for obtaining quantitative parameters for the adsorption process. It is shown by analytical approximation of the kinetic curves for fibrinogen adsorption onto an unmodified gold surface studied by a surface plasmon resonance biosensor that this model is in good quantitative agreement with experiments. It is found that the rate of adsorption, controlled mainly by the mass flow from the solution, determines the contribution both to self-assembling and spreading, resulting in variations of adsorbed fibrinogen interfacial structures.
Collapse
Affiliation(s)
- B A Snopok
- V. Lashkaryov Institute of Semiconductor Physics, National Academy of Sciences, Prospect Nauki 45, 03028 Kiev, Ukraine.
| | | |
Collapse
|
170
|
McKee MG, Hunley MT, Layman JM, Long TE. Solution Rheological Behavior and Electrospinning of Cationic Polyelectrolytes. Macromolecules 2005. [DOI: 10.1021/ma051786u] [Citation(s) in RCA: 173] [Impact Index Per Article: 9.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Matthew G. McKee
- Department of Chemistry, Macromolecules and Interfaces Institute (MII), Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061
| | - Matthew T. Hunley
- Department of Chemistry, Macromolecules and Interfaces Institute (MII), Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061
| | - John M. Layman
- Department of Chemistry, Macromolecules and Interfaces Institute (MII), Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061
| | - Timothy E. Long
- Department of Chemistry, Macromolecules and Interfaces Institute (MII), Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061
| |
Collapse
|
171
|
Garza JM, Jessel N, Ladam G, Dupray V, Muller S, Stoltz JF, Schaaf P, Voegel JC, Lavalle P. Polyelectrolyte multilayers and degradable polymer layers as multicompartment films. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2005; 21:12372-7. [PMID: 16343016 DOI: 10.1021/la051465b] [Citation(s) in RCA: 42] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.
Collapse
Affiliation(s)
- Juan Méndez Garza
- INSERM U595, Strasbourg, F-67085, and Faculté de Chirurgie Dentaire, Université Louis Pasteur, Strasbourg, F-67085 France
| | | | | | | | | | | | | | | | | |
Collapse
|
172
|
Podsiadlo P, Paternel S, Rouillard JM, Zhang Z, Lee J, Lee JW, Gulari E, Kotov NA. Layer-by-layer assembly of nacre-like nanostructured composites with antimicrobial properties. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2005; 21:11915-21. [PMID: 16316133 DOI: 10.1021/la051284+] [Citation(s) in RCA: 102] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
In a recent report, we have presented the layer-by-layer (LBL) assembly of a biomimetic nanostructured composite from Na(+)-montmorillonite clay nanosheets and poly(diallylmethylammonium chloride) (Tang, Z.; Kotov, N.; Magonov, S.; Ozturk, B. Nat. Mater. 2003, 2, 413). The structure, deformation mechanism, and mechanical properties of the material are very similar to those of natural nacre and lamellar bones. This fact prompts further investigation of these composites as potential bone implants. LBL assembly affords preparation of multifunctional composites, and here we demonstrate that not only mechanical strength, but also antibacterial activity, can be introduced in these implantable materials by alternating clay layers with starch-stabilized silver nanoparticles. The resulting composite showed excellent structural stability with no detectable levels of silver lost over a 1 month period. Evaluation of the antibacterial properties showed almost complete growth inhibition of E. coli over an 18 h period. The amount of silver eluted from the LBL composite over a 1 month period was determined to be only 0.5-3.0 microg/L. This concentration of silver did not prevent the growth of the mammalian tissue cultures. The LBL composite has shown biocompatibility with the human osteoblast cell line.
Collapse
Affiliation(s)
- Paul Podsiadlo
- Department of Chemical Engineering, The University of Michigan, Ann Arbor, 48109, USA
| | | | | | | | | | | | | | | |
Collapse
|
173
|
Fu J, Ji J, Yuan W, Shen J. Construction of anti-adhesive and antibacterial multilayer films via layer-by-layer assembly of heparin and chitosan. Biomaterials 2005; 26:6684-92. [PMID: 15946736 DOI: 10.1016/j.biomaterials.2005.04.034] [Citation(s) in RCA: 290] [Impact Index Per Article: 15.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/13/2004] [Accepted: 04/07/2005] [Indexed: 11/23/2022]
Abstract
Chitosan as an antibacterial agent and heparin as an anti-adhesive agent were alternatively deposited onto aminolyzed poly(ethylene terephthalate) (PET) films to construct anti-adhesive and antibacterial multilayer films. The contact-angle and UV data verified the progressive buildup of the multilayer film by alternate deposition of the polyelectrolytes. The properties of multilayer films were investigated by contact angle, atomic force microscopy (AFM), lateral force microscopy (LFM) and UV spectra. The results of initial adhesion of Escherichia coli (E. coli) on PET substrates showed that the number of E. coli adhered onto the control PET was in a much greater extent than onto the chitosan/heparin multilayer films, and the number of adhesive bacteria decreased with a decrease in assembly pH. The in vitro antibacterial test indicated that a multilayer of chitosan/heparin could kill the bacteria effectively. The number of viable bacteria decreased by 7% after 7 h in contact with the control PET films, but by 46-68% for the multilayer-modified PET films. Only 3-8% of the cells were viable for the multilayer-modified PET films after 24h. It is interesting to find the assembly pH has a remarkable effect on the antibacterial property of the multilayer. The number of viable bacteria on the multilayer assembled at pH = 3.8, 2.9 and 6.0 decreased by 68%, 58% and 46%, respectively. Such an easy processing and shape-independent method to prepare an anti-adhesive and antibacterial surface may have good potential for surface modification of cardiovascular devices.
Collapse
Affiliation(s)
- Jinhong Fu
- Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China
| | | | | | | |
Collapse
|
174
|
Etienne O, Gasnier C, Taddei C, Voegel JC, Aunis D, Schaaf P, Metz-Boutigue MH, Bolcato-Bellemin AL, Egles C. Antifungal coating by biofunctionalized polyelectrolyte multilayered films. Biomaterials 2005; 26:6704-12. [PMID: 15992921 DOI: 10.1016/j.biomaterials.2005.04.068] [Citation(s) in RCA: 92] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/18/2005] [Accepted: 04/12/2005] [Indexed: 01/17/2023]
Abstract
The surface of medical devices is a common site of bacterial and fungal adhesion, first step to the constitution of a resistant biofilm leading frequently to chronic infections. In order to prevent such complications, several physical and chemical modifications of the device surface have been proposed. Here, we experiment a new type of topical antifungal coating using the layer-by-layer technique. The nanometric multilayer film obtained by this technique is functionalized by the insertion of a chromogranin A-derived antifungal peptide (CGA 47-66, chromofungin). We show that the embedded peptide keeps its antifungal activity by interacting with the fungal membrane and penetrating into the cell. In vitro studies demonstrate that such an antifungal coating is able to inhibit the growth of yeast Candida albicans by 65% and completely stop the proliferation of filamentous fungus Neurospora crassa. The cytotoxicity of such a coating was also assessed by growing human gingival fibroblasts at its surface. Finally, the antifungal coating of poly(methylmethacrylate), a widely used material for biomedical devices, is successfully tested in an in vivo oral candidiasis rat model. Taken together, these results assessed the functionalized multilayer films containing a new potent antifungal non-toxic peptide, as a novel and promising technique for local antifungal protection.
Collapse
Affiliation(s)
- Olivier Etienne
- Institut National de la Santé et de la Recherche Médicale, Unité 595, 11, rue Humann, 67085 Strasbourg Cedex, France
| | | | | | | | | | | | | | | | | |
Collapse
|
175
|
Sukhishvili SA. Responsive polymer films and capsules via layer-by-layer assembly. Curr Opin Colloid Interface Sci 2005. [DOI: 10.1016/j.cocis.2005.05.001] [Citation(s) in RCA: 310] [Impact Index Per Article: 16.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
176
|
Schultz P, Vautier D, Richert L, Jessel N, Haikel Y, Schaaf P, Voegel JC, Ogier J, Debry C. Polyelectrolyte multilayers functionalized by a synthetic analogue of an anti-inflammatory peptide, α-MSH, for coating a tracheal prosthesis. Biomaterials 2005; 26:2621-30. [PMID: 15585265 DOI: 10.1016/j.biomaterials.2004.06.049] [Citation(s) in RCA: 101] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2004] [Accepted: 06/25/2004] [Indexed: 11/22/2022]
Abstract
Polyelectrolyte multilayer films made of poly (L-lysine) (PLL) and poly (L-glutamic acid) (PGA) have been functionalized by covalent binding of a synthetic analogue of the anti-inflammatory peptide, alpha-melanocyte-stimulating hormone (alpha-MSH) to PGA to create biologically active coatings for tracheal prostheses. The morphology and in vivo stability of the films were investigated by atomic force microscopy and confocal laser scanning microscopy, respectively. For the in vivo evaluation, 87 rats were implanted and examined for a period superior to 3 months. Histological analysis, performed 1 month after implantation, showed a fibroblast colonization of the periprosthetic side and a respiratory epithelium type on the endoluminal side of the implant for all the polyelectrolyte coatings tested. However, for prostheses modified by PGA ending multilayer films, a more regular and less obstructive cell layer was observed on the endoluminal side compared to those modified by PLL ending films. Systemic anti-inflammatory IL-10 production was only detected in rats implanted with prostheses functionalized by alpha-MSH, demonstrating, in vivo, the anti-inflammatory activity of the embedded peptide into multilayer architectures.
Collapse
Affiliation(s)
- Philippe Schultz
- Department of Otolaryngology-Head and Neck Surgery, Hautepierre Hospital, Strasbourg, France
| | | | | | | | | | | | | | | | | |
Collapse
|
177
|
Ball V, Voegel JC, Schaaf P. Effect of thiocyanate counterion condensation on poly(allylamine hydrochloride) chains on the buildup and permeability of polystyrenesulfonate/polyallylamine polyelectrolyte multilayers. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2005; 21:4129-4137. [PMID: 15835984 DOI: 10.1021/la047610n] [Citation(s) in RCA: 15] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/24/2023]
Abstract
In this study, we investigate the buildup of PEI-(PSS-PAH)(n) polyelectrolyte multilayers at pH 7.4 in the presence of either NaCl or NaSCN as a supporting electrolyte. It appears that in the presence of increasing thiocyanate concentrations (from 0.1 to 0.5 M), the thickness increment, obtained from optical waveguide lightmode spectroscopy experiments, increases whereas it stays practically constant for increasing sodium chloride concentrations (between 0.1 and 0.5 M). The hydration of the films differs also markedly between both electrolyte solutions. The differences in the construction of the polyelectrolyte multilayers in the presence of both supporting electrolytes are rationalized in terms of strong SCN(-) condensation on the PAH chains. The occurrence of this ion condensation is indirectly demonstrated by means of zeta potential measurements and directly demonstrated by means of attenuated total internal reflection infrared spectroscopy on the multilayer films. Moreover when the films are built up in the presence of SCN(-), these ions are only slowly exchanged by the Cl(-) ions introduced in the bulk. Conversely the thick films obtained from 0.5 M NaSCN solutions do not deswell when the buffer solution is replaced by a 0.5 M NaCl containing buffer. The permeability of the films constructed in the presence of both sodium salts is also studied by means of cyclic voltametry and is found to be markedly different in the case of films made from five bilayers at 0.5 M salt concentration. This difference is due to the different morphology and porosity of the films constructed in the presence of 0.5 M NaCl and 0.5 M NaSCN.
Collapse
Affiliation(s)
- Vincent Ball
- Institut Charles Sadron, Centre National de la Recherche Scientifique, Unité Propre 22, 6 rue Boussingault, 67083 Strasbourg Cedex, France
| | | | | |
Collapse
|
178
|
Kambia NK, Dine T, Dupin-Spriet T, Gressier B, Luyckx M, Goudaliez F, Brunet C. Compatibility of nitroglycerin, diazepam and chlorpromazine with a new multilayer material for infusion containers. J Pharm Biomed Anal 2005; 37:259-64. [PMID: 15708665 DOI: 10.1016/j.jpba.2004.10.020] [Citation(s) in RCA: 16] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/15/2004] [Accepted: 10/18/2004] [Indexed: 11/24/2022]
Abstract
The stability and compatibility of three drugs: nitroglycerin, diazepam and chlorpromazine, with a new multilayer infusion bag were studied. The study was carried out comparatively with PVC bags with which these drugs are incompatible. The drugs were diluted in 5% dextrose or in 0.9% sodium chloride isotonic solutions. Solutions were stored during 8 or 48 h with or without any protection against light. Remaining concentrations of drug were determined by high-performance liquid chromatography (HPLC) during the storage. The admixtures were also monitored for precipitation, color change and pH. Whatever the isotonic solution used, the loss of drugs is in discredit of the use of PVC bags for their storage. So, these three drugs would not be stored in PVC bags. In multilayer bags, no loss of drugs and no color change were detected throughout the storage period. pH values were stable during the same storage period. These three drugs were compatible with multilayer bags in all tested conditions for 8 or 48 h. The leaching of the plasticizer di-(2-ethylhexyl) phthalate (DEHP), that is incorporated into PVC to make the bags soft and pliable was not detected in the three drug solutions during storage period. Our study confirms that these three drugs are incompatible with PVC bags, on the contrary the new materiel tested was proved to be interesting for drug storage.
Collapse
Affiliation(s)
- N K Kambia
- Faculté des Sciences Pharmaceutiques et Biologiques, Laboratoire de Pharmacologie, Pharmacocinétique et Pharmacie Clinique, 3 Rue du Professeur Laguesse, B.P. 83, 59006 Lille Cedex, France
| | | | | | | | | | | | | |
Collapse
|
179
|
Etienne O, Schneider A, Taddei C, Richert L, Schaaf P, Voegel JC, Egles C, Picart C. Degradability of Polysaccharides Multilayer Films in the Oral Environment: an in Vitro and in Vivo Study. Biomacromolecules 2005; 6:726-33. [PMID: 15762636 DOI: 10.1021/bm049425u] [Citation(s) in RCA: 117] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Biomedical devices and modified biomaterial surfaces constitute an expanding research domain in the dental field. However, such oral applications have to face a very particular environment containing specific physiological conditions and specific enzymes. To evaluate their suitability in the development of novel oral applications, the degradability of polyelectrolyte multilayer films made of the natural polysaccharides chitosan and hyaluronan (CHI/HA) was investigated in vitro and in vivo in a rat mouth model. The films were either native or cross-linked using a water-soluble carbodiimide (EDC) in combination with N-hydroxysulfosuccinimide. The in vitro degradation of the films by different enzymes present in the oral environment, such as lysozyme and amylase, was followed by quartz crystal microbalance measurements and confocal laser scanning microscopy observations after being film labeled with CHI(FITC). Whereas native films were subjected to degradation by all the enzymes, cross-linked films were more resistant to enzymatic degradation. Films were also put in contact with whole saliva, which induced a slow degradation of the native films over an 18 h period. The in vivo degradation of the films deposited on polymer disks and sutured in the rat mouth was followed over a 3 day period. Whereas film degradation is fast for native films, it is much slower for the cross-linked ones. More than 60% of these films remained on the disks after 3 days in the mouth. Taken together, these results suggest that the multilayer films made of natural polysaccharides are of high potential interest for oral applications, especially as drug release systems, offering various degradation rates and consequent release characteristics.
Collapse
Affiliation(s)
- Olivier Etienne
- Institut National de la Santé et de la Recherche Médicale, Unité 595, Université Louis Pasteur, 11 rue Humann, 67085 Strasbourg Cedex, France
| | | | | | | | | | | | | | | |
Collapse
|
180
|
Roosjen A, van der Mei HC, Busscher HJ, Norde W. Microbial adhesion to poly(ethylene oxide) brushes: influence of polymer chain length and temperature. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2004; 20:10949-10955. [PMID: 15568845 DOI: 10.1021/la048469l] [Citation(s) in RCA: 148] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/24/2023]
Abstract
Glass surfaces were modified by end-grafting poly(ethylene oxide) (PEO) chains having molecular weights of 526, 2000, or 9800 Da. Characterization using water contact angles, ellipsometry, and X-ray photoelectron spectroscopy confirmed the presence of the PEO brushes on the surface with estimated lengths in water of 2.8-, 7.5-, and 23.7-nm, respectively. Adhesion of two bacterial (Staphylococcus epidermidis and Pseudomonas aeruginosa) and two yeast (Candida albicans and Candida tropicalis) strains to these brushes was studied and compared to their adhesion to bare glass. For the bacterium P. aeruginosa and the yeast C. tropicalis, adhesion to the 2.8-nm brush was comparable to their adhesion on bare glass, whereas adhesion to the 7.5- and 23.7-nm brushes was greatly reduced. For S. epidermidis, adhesion was only slightly higher to the 2.8-nm brush than that to the longer brushes. Adhesion of the yeast C. albicans to the PEO brushes was lower than that to glass, but no differences in adhesion were found between the three brush lengths. After passage of an air bubble, nearly all microorganisms adhering to a brush were removed, irrespective of brush length, whereas retention of the adhering organisms on glass was much higher. No significant differences were found in adhesion nor retention between experiments conducted at 20 and those conducted at 37 degrees C.
Collapse
Affiliation(s)
- Astrid Roosjen
- Department of Biomedical Engineering, University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands
| | | | | | | |
Collapse
|
181
|
Etienne O, Picart C, Taddei C, Haikel Y, Dimarcq JL, Schaaf P, Voegel JC, Ogier JA, Egles C. Multilayer polyelectrolyte films functionalized by insertion of defensin: a new approach to protection of implants from bacterial colonization. Antimicrob Agents Chemother 2004; 48:3662-9. [PMID: 15388417 PMCID: PMC521874 DOI: 10.1128/aac.48.10.3662-3669.2004] [Citation(s) in RCA: 164] [Impact Index Per Article: 8.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
Abstract
Infection of implanted materials by bacteria constitutes one of the most serious complications following prosthetic surgery. In the present study, we developed a new strategy based on the insertion of an antimicrobial peptide (defensin from Anopheles gambiae mosquitoes) into polyelectrolyte multilayer films built by the alternate deposition of polyanions and polycations. Quartz crystal microbalance and streaming potential measurements were used to follow step by step the construction of the multilayer films and embedding of the defensin within the films. Antimicrobial assays were performed with two strains: Micrococcus luteus (a gram-positive bacterium) and Escherichia coli D22 (a gram-negative bacterium). The inhibition of E. coli D22 growth at the surface of defensin-functionalized films was found to be 98% when 10 antimicrobial peptide layers were inserted in the film architecture. Noticeably, the biofunctionalization could be achieved only when positively charged poly(l-lysine) was the outermost layer of the film. On the basis of the results of bacterial adhesion experiments observed by confocal or electron microscopy, these observations could result from the close interaction of the bacteria with the positively charged ends of the films, which allows defensin to interact with the bacterial membrane structure. These results open new possibilities for the use of such easily built and functionalized architectures onto any type of implantable biomaterial. The modified surfaces are active against microbial infection and represent a novel means of local host protection.
Collapse
Affiliation(s)
- O Etienne
- Institut National de la Santé et de la Recherche Médicale, Unité 595, 11, rue Humann, 67085 Strasbourg Cedex, France.
| | | | | | | | | | | | | | | | | |
Collapse
|