Catechols as versatile platforms in polymer chemistry

Healing through Histidine: Bioinspired Pathways to Self-Healing Polymers via Imidazole⁻Metal Coordination

Biology offers a valuable inspiration toward the development of self-healing engineering composites and polymers. In particular, chemical level design principles extracted from proteinaceous biopolymers, especially the mussel byssus, provide inspiration for design of autonomous and intrinsic healing in synthetic polymers. The mussel byssus is an acellular tissue comprised of extremely tough protein-based fibers, produced by mussels to secure attachment on rocky surfaces. Threads exhibit self-healing response following an apparent plastic yield event, recovering initial material properties in a time-dependent fashion. Recent biochemical analysis of the structure-function relationships defining this response reveal a key role of sacrificial cross-links based on metal coordination bonds between Zn2+ ions and histidine amino acid residues. Inspired by this example, many research groups have developed self-healing polymeric materials based on histidine (imidazole)-metal chemistry. In this review, we provide a detailed overview of the current understanding of the self-healing mechanism in byssal threads, and an overview of the current state of the art in histidine- and imidazole-based synthetic polymers.

Codeposition of Polydopamine and Zwitterionic Polymer on Membrane Surface with Enhanced Stability and Antibiofouling Property

Although abundant works have been developed in mussel-inspired antifouling coatings, most of them suffer from poor chemical stability, especially in a strongly alkaline environment. Herein, we report a robust one-step mussel-inspired method to construct a highly chemical stable and excellent antibiofouling membrane surface coating with a highly efficient codeposition of polydopamine (PDA) with zwitterionic polymer. In the study, PDA and polyethylenimine-quaternized derivative (PEI-S) are codeposited on the surface of poly(ether sulfone) (PES) ultrafiltration membrane in water at room temperature. In contrast to individual PDA coating, the obtained PDA/PEI-S coating exhibits excellent chemical stability even in a strongly alkaline environment owing to the cross-linking and unexpected cation-π interaction between the PEI-S and PDA. Thanks to the introduction of PEI-S, systematic protein adsorption tests and bacteria adhesion experiments demonstrated that the surfaces could prevent bovine serum fibrinogen and lysozyme adsorption and could reduce Gram-positive bacteria S. aureus and Gram-negative bacteria E. coli adhesion. Benefiting from the versatile functionality of PDA, the proposed strategy is not limited to PES membrane surface but also others such as poly(ethylene terephthalate) sheets and commercial polypropylene microfiltration membranes. Overall, this work enriches the exploration of a remarkable coating with enhanced stability and excellent antifouling property via a facile, robust, and material-independent approach to modifying the membrane surface.

Nano polydopamine crosslinked thiol-functionalized hyaluronic acid hydrogel for angiogenic drug delivery

Crosslinking of polymeric network using nanoparticles by physical or chemical method to obtain hydrogel is an emerging approach. Herein, we synthesized Polydopamine (PDA) nanoparticles via oxidative self-polymerization of dopamine in water-ethanol mixture. Thiol-functionalized hyaluronic acid was developed using cysteamine and hyaluronic acid (HA-Cys) via 1-Ethyl-3-(3-Dimethylaminopropyl) Carbodiimide - N-hydroxysuccinimide (EDC-NHS) crosslinking chemistry. Developed HA-Cys conjugate was cross-linked using PDA nanoparticles via Michael-type addition reaction. Synthesized nanoparticles were monodisperse with size of 124 ± 8 nm and had spherical morphology. FTIR characterization confirmed successful synthesis of HA-Cys conjugate and subsequent crosslinking with PDA nanoparticles. Rheological characterization revealed that hydrogels were injectable in nature with good mechanical stability. Dimethyloxalylglycine (DMOG) loaded PDA nanoparticle showed sustained drug release for period of 7 days from composite hydrogel. Hydrogel microenvironment facilitated enhanced endothelial cell migration, proliferation and attachment. Furthermore, in response to release of DMOG from developed hydrogel, cells showed enhanced capillary tube formation in vitro. Overall, these results demonstrate that PDA cross-linked thiol-functionalized hydrogel was developed in a facile manner under physiological conditions. These developed hydrogels could be potentially used in tissue engineering and drug delivery.

Theoretical Investigation of the Structural, Spectroscopic, Electronic, and Pharmacological Properties of 4-Nerolidylcathecol, an Important Bioactive Molecule

4-Nerolidylcatechol (4NRC), a secondary metabolite described as a potent antioxidant that presents anti-inflammatory, antimalarial, analgesic, and cytotoxic properties, has been receiving prominence in the catechol class. In this work, a theoretical DFT study of the vibrational, structural, and quantum properties of 4-nerolidylcatechol (4NRC) using the B3LYP/6-311G (2d,p) level is presented. The theoretical molecular geometry data were compared with the X-ray data of a similar molecule in the associated literature and a conformational study is presented, with the aim of providing a good comprehension of the 4NRC structural arrangement and stability. Also, HOMO-LUMO energy gap and natural bond orbitals (NBOs) were performed and discussed. The calculated UV spectrum showed similarity to the experimentally obtained data, with transitions assigned. The comparative IR studies revealed that intermolecular hydrogen bonds that stabilize dimeric forms are plausible and also allowed the assignment of several characteristic vibrations. Molecular docking calculations with DNA topoisomerase I-DNA complex (TOPO-I), glyceraldehyde 3-phospate dehydrogenase (GAPDH), and Plasmodium falciparum lactate dehydrogenase (PfLDH) showed binding free energies of −6.3, −6.5, and −7.6 kcal/mol, respectively, which indicates that 4NRC is a good competitive inhibitor for these enzymes.

Nitrodopamine vs dopamine as an intermediate layer for bone regeneration applications

The aim of this paper was to present a parallel investigation of the poly(dopamine) (DP) and nitrodopamine (NDP) structures deposited on titanium surface (Ti) and titanium oxide nanotubes (NT-TiO₂/Ti) and to highlight their advantages and drawbacks to serve as an intermediary layer for bone regeneration applications. This study outlines some hypotheses regarding the manner in which these compounds are able to form a stable film that could serve as bioadhesive. The paper is also a study of structuring and evolution of film architecture for two coatings, polydopamine and nitrodopamine in terms of surface structure, stability, wettability, morphology, adhesion and ability to protect the titanium surface. All investigations are based on the data provided by surface characterization techniques: SEM, RAMAN, XRD, XPS, wettability and flexural strength. The impact of polydopamine and nitrodopamine coatings on the biocompatibility of titanium nanotubes was investigated in vitro. Cell morphology, viability, proliferation and pre-osteoblast differentiation were examined in detail. It was highlighted that both DP and NDP functionalized TiO₂ nanotubes display good cell response in terms of cell spreading, formation of focal adhesions, cell viability and proliferation, suggesting their suitability for applications in bone regeneration field. However, NDP coated TiO₂ nanotubes demonstrated an enhanced osteogenic potential compared to DP coated substrates.

A shear-thinning adhesive hydrogel reinforced by photo-initiated crosslinking as a fit-to-shape tissue sealant

A fit-to-shape sealant enhanced by photo-initiated crosslinking treated a wound with a nonplanar complex contour rapidly and effectively.

Mussel-inspired fabrication of pH-sensitive biomimetic hydrogels based on greenhouse gas carbon dioxide

Biomimetic hydrogels were prepared from carbon dioxide using a facile method. The PPC block and catechol groups contained in PPC-PU-LDA enable the hydrogel to have good cell compatibility and adhesion.

Heparin-based and heparin-inspired hydrogels: size-effect, gelation and biomedical applications

The size-effect, fabrication methods and biomedical applications of heparin-based and heparin-inspired hydrogels are reviewed.

Versatile functionalization of surface-tailorable polymer nanohydrogels for drug delivery systems

Surface-tailorable nanohydrogels with catechol groups as a universal anchor were developed for versatile functionalization in drug delivery applications.

Fast and Green Synthesis of an Oligo-Hydrocaffeic Acid-Based Adhesive

A green, mussel-inspired bioadhesive based on oligomerization of hydrocaffeic acid was synthesized in water by an ultrafast one-step reaction in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide as an activating agent. The resulting oligomers exhibited strong wet adhesion when applied to different substrates including glass, stainless steel, and aluminum. Compared to most commercial adhesives, this bioinspired adhesive is produced via a sustainable and green process, i.e., aqueous-based synthesis, one-step reaction, and in the absence of any purification step to obtain the final functional adhesive.

Adhesion Control of Branched Catecholic Polymers by Acid Stimulation

Biomimetic material design is a useful method for producing new functional materials. In recent years, catecholic polymers inspired from the adhesion mechanism of marine organisms have attracted attention. Here, we demonstrated the preparation of catecholic polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization of an acetonide-protected catecholic monomer, that is, N-(2-(2,2-dimethylbenzo-1,3-dioxol-5-yl)ethyl)-acrylamide (DDEA). By selecting the specific RAFT reagents, well-defined branched PDDEA and linear PDDEA were obtained. These PDDEA samples showed stronger adhesion strength after deprotection by acid stimulation compared with that before deprotection. In addition, we demonstrated the adhesion control of synthetic polymers by photoirradiation in the presence of photoacid generators, which decompose under light and release an acid.

Facile fabrication of multifunctional fabrics: use of copper and silver nanoparticles for antibacterial, superhydrophobic, conductive fabrics

This study aims to develop a multifunctional fabric for antibacterial, superhydrophobic and conductive performance using a facile fabrication method. Conductive metal particles, copper and silver, were used as antibacterial agents as well as a means to create nanoscale roughness on the fabric surface. Subsequent hydrophobic coating with 1-dodecanethiol produced a superhydrophobic surface. The single metal treatment with Cu or Ag, and the combined metal treatment of Cu/Ag were compared for the multifunctionality. The Cu/Ag treated fabric and the Cu treated fabric showed a bacteriostatic rate ≥ 99% and a sterilization rate ≥ 99% against S. aureus, suggesting a higher antibacterial activity against the Gram-positive bacteria. In contrast, the Ag treated fabric showed a lower antibacterial effect regardless of the bacteria type. With regards to conductivity, the single metal treated fabric did not exhibit conductivity; however the Cu/Ag treated fabric showed a high level conductivity with a surface resistivity of 25.17 ± 8.18 Ω sq-1 and 184.38 ± 85.42 Ω sq-1 before and after hydrophobic coating, respectively. Fabrics treated with Cu and Cu/Ag particles (with hydrophobic coating) displayed superhydrophobic characteristics with the contact angle of 161-162° and the shedding angle of 7.0-7.8°. The air permeability decreased after the particle treatment as the particles blocked the pores in the fabric. However, the water vapor permeability and tensile strength were not significantly affected by the particle treatment. This study is significant in that a multifunctionality of antibacterial effect, superhydrophobicity, and conductivity was achieved through the facile processes for metal nanoparticle attachment and hydrophobic coating. The multifunctional fabrics produced in this study can be practically applied to self-cleaning smart clothing, which has reduced laundering need, without hygiene concerns.

Surface Water Structure and Hygroscopic Properties of Light Absorbing Secondary Organic Polymers of Atmospheric Relevance

Hygroscopic properties and chemical reactivity of secondary organic aerosols (SOA) influence their overall contribution to the indirect effect on the climate. In this study, we investigate the hygroscopic properties of organic and organometallic polymeric particles, namely polycatechol, polyguaiacol, Fe-polyfumarte, and Fe-polymuconate. These particles efficiently form in iron-catalyzed reactions with aromatic and aliphatic dicarboxylic acid compounds detected in field-collected SOA. The structure of surface water was studied using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and the uptake of gas water was quantified using quartz crystal microbalance (QCM) as a function of relative humidity. Spectroscopic data show that water bonding with organic functional groups acting as hydrogen bond acceptors causes shifts in their vibrational modes. Analysis of the hydroxyl group stretching region revealed weak and strong hydrogen bonding networks that suggest cluster formation reflecting water-water and water-organics interactions, respectively. A modified Type II multilayer Brunauer-Emmett-Teller adsorption model described the adsorption isotherm on the nonporous materials, polycatechol, polyguaiacol, and Fe-polymuconate. However, water adsorption on porous Fe-polyfumarate was best described using a Type V adsorption model, namely the Langmuir-Sips model that accounts for condensation in pores. The data revealed that organometallic polymers are more hygroscopic than organic polymers. The implications of these investigations are discussed in the context of the chemical reactivity of these particles relative to known SOA.

Polymerizing Like Mussels Do: Toward Synthetic Mussel Foot Proteins and Resistant Glues

A novel strategy to generate adhesive protein analogues by enzyme-induced polymerization of peptides is reported. Peptide polymerization relies on tyrosinase oxidation of tyrosine residues to Dopaquinones, which rapidly form cysteinyldopa-moieties with free thiols from cysteine residues, thereby linking unimers and generating adhesive polymers. The resulting artificial protein analogues show strong adsorption to different surfaces, even resisting hypersaline conditions. Remarkable adhesion energies of up to 10.9 mJ m-2 are found in single adhesion events and average values are superior to those reported for mussel foot proteins that constitute the gluing interfaces.

Intermolecular Hydrogen Bonding Modulates O-H Photodissociation in Molecular Aggregates of a Catechol Derivative

The catechol functional group plays a major role in the chemistry of a wide variety of molecules important in biology and technology. In eumelanin, intermolecular hydrogen bonding between these functional groups is thought to contribute to UV photoprotective and radical buffering properties, but the mechanisms are poorly understood. Here, aggregates of 4-t-butylcatechol are used as model systems to study how intermolecular hydrogen bonding influences photochemical pathways that may occur in eumelanin. Ultrafast UV-visible and mid-IR transient absorption measurements are used to identify the photochemical processes of 4-t-butylcatechol monomers and their hydrogen-bonded aggregates in cyclohexane solution. Monomer photoexcitation results in hydrogen atom ejection to the solvent via homolytic O-H bond dissociation with a time constant of 12 ps, producing a neutral semiquinone radical with a lifetime greater than 1 ns. In contrast, intermolecular hydrogen bonding interactions within aggregates retard O-H bond photodissociation by over an order of magnitude in time. Excited state structural relaxation is proposed to slow O-H dissociation, allowing internal conversion to the ground state to occur in hundreds of picoseconds in competition with this channel. The semiquinone radicals formed in the aggregates exhibit spectral broadening of both their electronic and vibrational transitions.

Surface Functionalization and Patterning by Multifunctional Resorcinarenes

Plant phenolic compounds and catecholamines have been widely used to obtain substrate-independent precursor nanocoatings and adhesives. Nevertheless, there are downsides in using such phenolic compounds for surface modification such as formation of nonuniform coatings, need for multistep modification, and restricted possibilities for postfunctionalization. In this study, inspired by a strong binding ability of natural polyphenols found in plants, we used three different macrocyclic polyphenols, known as resorcin[4]arenes, to modify the surface of different substrates by simple dip-coating into the dilute solution of these compounds. Eight hydroxyl groups on the large rim of these resorcin[4]arenes provide multiple anchoring points to the surface, whereas the lower rim decorated with different appending groups introduces the desired chemical and physical functionalities to the substrate's surface. Deposition of a uniform and transparent resorcinarene layer on the surface was confirmed by several surface characterization techniques. Incubation of the modified substrates in different environments indicated that the stability of the resorcinarene layer was dependent on the type of substrate and the pH value. The most stable resorcinarene layer was formed on amine-functionalized substrates. The surface was modified with alkenyl functional groups in one step using a resorcinarene compound possessing four alkenyl appending groups on its small rim. Thiol-ene photoclick chemistry was used to site-selectively postfunctionalize the surface with hydrophilic and hydrophobic micropatterns, which was confirmed by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry. Thus, we demonstrate that resorcin[4]arenes extend the scope of applications of plant polyphenol and mussel-inspired precursors to tailor-made multifunctional nanocoatings, suitable for a variety of potential applications in biotechnology, biology, and material science.

Foe to Friend: Supramolecular Nanomedicines Consisting of Natural Polyphenols and Bortezomib

Bortezomib (BTZ) is a first-in-class boronate proteasome inhibitor used for cancer therapy, but its therapeutic efficacy is usually inhibited by dietary polyphenols due to boronate-catechol complexation. Benefiting from such dynamic covalent chemistry, herein we describe a novel class of supramolecular nanomedicines by rationally converting natural polyphenols from foe to friend through polyphenol-mediated BTZ assembly strategy. The simple conjugation of BTZ to catechol-containing natural polyphenols via boronate ester bond allows the facile formation of dynamic drug amphiphiles, with pH-dependent assembly/disassembly behaviors under different physiological conditions. Ferric ion was also incorporated into the supramolecular system via metal-phenolic coordination interaction to both introduce bioimaging function and facilitate stability of the supramolecular nanomedicines. Our investigation revealed that the supramolecular nanomedicine consisting of natural polyphenol, BTZ and ferric ion dramatically induced apoptosis on cancer cells and suppressed tumor growth in both subcutaneous and bone tumor models with limited adverse effects. Such natural polyphenol-mediated small drug assembly strategy enables the robust fabrication of supramolecular nanomedicines for efficient delivery and controlled release of BTZ in targeted tumor sites, which could be further employed in other types of boronic acid-containing supramolecular therapeutics toward a wide range of diseases.

Control of Interfacial Diels-Alder Reactivity by Tuning the Plasma Polymer Properties

Functionalizing the surface of a material with a smart plasma polymer coating is an interesting alternative strategy to obtain a thermoresponsive material without changing its formulation. On the basis of a low-pressure plasma polymerization process, the present work first aims to fabricate polymer thin films that react via the well-known thermoreversible Diels-Alder (DA) reaction (diene/dienophile cycloaddition). A two-step surface modification process based on (pulsed) plasma polymerization enables the design of functional coatings that contain furan (diene) groups. The reactivity of these surfaces with maleic anhydride (dienophile) in solution is thoroughly investigated, mainly by studying the kinetics of the DA reaction by advancing contact angle measurements. The determination of rate constants of reactions at various temperatures leads to the quantification of thermodynamic parameters such as the activation energy of the reaction as well as the enthalpy and entropy of activation related to the formation of the transition-state complex involved in the DA reaction. More interestingly, the design of furan-functionalized coatings with various physicochemical properties enables the understanding of the role played by the density of functional groups and the cross-linking rate of the polymer on the interfacial reactivity. Thus, we show in this work how to control the interfacial DA reaction on plasma coatings by tailoring the operating conditions of plasma polymerization.

Fabrication of an Anion-Exchange Membrane by Pore-Filling Using Catechol-1,4-Diazabicyclo-[2,2,2]octane Coating and Its Application to Reverse Electrodialysis

We have successfully exploited the Michael-type addition reaction between catechol and DABCO (1,4-diazabicyclo-[2,2,2]octane) molecules under alkaline conditions for the formation of new quaternary ammonium (QA) groups in an anion-exchange membrane. The anion-exchange membranes (AEMs) were prepared using the pore-filling method by addition of electrolytes (vinyl benzyl trimethylammonium chloride (VBTMA), dopamine methacrylamide (DMA) bearing a catechol group, and ethylene glycol diacrylate as a cross-linker) to a porous substrate. The formation of new QA groups by the reaction of DABCO with catechol components was confirmed by characterization of new peaks in the Fourier transform infrared spectra of the AEMs. The DABCO-bound AEM demonstrated a significant decrease in area resistance (0.4 Ω·cm²) and increase in permselectivity (94%). Furthermore, the electrochemical properties of the AEMs could be controlled by altering the concentrations of VBTMA and DMA and the formation of new bonds between DMA and DABCO. The calculated theoretical (4.31 W/m²) and practical (1.52 W/m²) power densities during a reverse electrodialysis (RED) process employing the membrane with the best properties (E2C1-DMA0.5-DABCO) were by 33 and 18% higher than those of a system utilizing a commercial membrane, Neosepta AMX (3.25 and 1.29 W/m²). Therefore, the AEM synthesized in this study is a good candidate for use in RED applications.

Room-temperature surface-assisted reactivity of a melanin precursor: silver metal-organic coordination versus covalent dimerization on gold

The ability of catecholamines to undergo oxidative self-polymerization provides an attractive route for preparation of coatings for biotechnology and biomedicine applications. However, efforts toward developing a complete understanding of the mechanism that underpins polymerization have been hindered by the multiple catechol crosslinking reaction pathways that occur during the reaction. Scanning tunneling microscopy allows the investigation of small molecules in a reduced-complexity environment, providing important insight into how the intermolecular forces drive the formation of supramolecular assemblies in a controlled setting. Capitalizing on this approach, we studied the self-assembly of 5,6-dihydroxy-indole (DHI) on Au(111) and Ag(111) to investigate the interactions that affect the two-dimensional growth mechanism and to elucidate the behavior of the catechol group on these two surfaces. X-ray photoelectron spectroscopy, together with density functional theory and Monte Carlo modeling, helps unravel the differences between the two systems. The molecules form large ordered domains, yet with completely different architectures. Our data reveal that some of the DHI molecules deposited on Ag are in a modified redox state, with their catechol group oxidized into quinone. On Ag(111), the molecules are deposited in long-range lamellar patterns stabilized by metal-organic coordination, while covalent dimer pairs are observed on Au(111). We also show that the oxidation susceptibility is affected by the substrate, with the DHI/Au remaining inert even after being exposed to O2 gas.

Polydopamine particles as nontoxic, blood compatible, antioxidant and drug delivery materials

Herein, the potential biomedical application of poly(3,4-dihyroxyphenyl)ethylamine, (poly(dopamine)-p(DA)) particles is reported. P(DA) particles with the size about 100 nm, 18.05 m²/g specific surface area, and mesoporous structure (7.19 nm pore width) were prepared and shown to be chemically modifiable using chlorosulfonic acid (CSA) and 3-CHloro-2 hydroxypropyl) trimethylammonium chloride solution (CHPACl) to obtain sulfonic acid and quaternary amine group containing modified p(DA) particles, m-p(DA)-CSA and m-p(DA)-CHPACl particles, respectively. The hydrolytic degradation of p(DA) particles at different pHs, including 1, 7.4 and 11, was carried out at 37.5 °C. These degradation studies revealed that p(DA) is slightly degradable at pH 1 and pH 7.4 with weight losses of 13.01 ± 0.08% and 7.26 ± 0.23% in 11 days, respectively. At pH 11, a sustained degradation that is almost linear degradation with time was observed for up to 30 days, with a total weight loss of 21.42 ± 0.88%. Furthermore, p(DA) particles were tested for cell toxicity against COS-1 cells and found non-toxic up to 50 μg/mL with 95.6 ± 4.5% cell viability as compared to 37.5 ± 0.03% for DA molecules. The p(DA) particles and DA were also compared for their ability to inhibit α-glucosidase; both inhibited α-glucosidase inhibition activity a concentration-dependent fashion: at concentrations of 500-4000 μg/mL, p(DA) provided 8.52-27.67% inhibition while DA inhibited 42.8-67.7% over the same concentration range. Furthermore, p(DA) particles were found to be blood compatible e.g., non-hemolytic with 1.87 ± 0.97% hemolysis ratio up to 50 μg/mL concentration and with 86.7% blood clotting index. Interestingly, p(DA) particle can be considered as an effective antioxidant with 33.5 ± 3.9 μg/ mL total phenol content in terms of gallic acid equivalency and 0.89 ± 0. 30 μmol/g trolox equivalent antioxidant capacity (TEAC). Finally, p(DA) particles and their modified forms, m-p(DA)-CSA, and m-p(DA)-CHPACl, were shown to be useful as active agent/drug delivery devices by using acyclovir as a model drug that can be readily loaded into particles and released at longer times at higher amounts for the modified p(DA) particles at physiological conditions.

Universal Nature-Inspired and Amine-Promoted Metallization for Flexible Electronics and Supercapacitors

Economical and abundant natural biological materials provide a low-cost and scalable approach to develop next-generation flexible and wearable electronics. Herein, a universal strategy of nature-inspired and amine-promoted metallization, namely, NIAPM, is presented to make high-quality metals for electronics fabrication. The introduction of poly(ethyleneimine) (PEI) significantly shortens the time of metallization from >48 h to ≈6 h, and the phenol compounds (TP) from green tea make metals bond tightly on all demonstrated surfaces. The as-made thin metal films of Cu and Ni feature high conductivity (∼1.0 Ω/□), excellent mechanical stability and flexibility even at the bending radius of ∼1 mm. Moreover, NIAPM is compatible with typical lithography techniques for fabricating metallic patterns, showing considerable potential applications in flexible electronics. As a proof-of-concept, two devices based on melamine-templated Cu sponges are first prepared for detecting the change of external pressure with a resistance sensitivity of 18.1 kPa^-1 and collecting high-viscosity crude oil, respectively. Then, a high-performance bendable solid supercapacitor is demonstrated using as-prepared Ni metallized fabrics and the activated porous carbon from the recycled waste in NIPAM as flexible electrodes, which possesses comparable areal capacitance of 45.5 F·g^-1, and energy density of 7.88 Wh·g^-1 at the power density of 35 W·g^-1. Therefore, it is anticipated that such a time-saving, cost-effective and whole solution-processed NIAPM strategy can inspire further practical applications in the fields of surface chemistry, material science, flexible and wearable electronics, etc.

Mussel-inspired construction of thermo-responsive double-hydrophilic diblock copolymers-decorated reduced graphene oxide as effective catalyst supports for highly dispersed superfine Pd nanoparticles

Well-dispersed ultrafine palladium nanoparticles supported by reduced graphene oxide functionalized with catechol-terminated thermo-responsive block copolymer (PdNPs@BPrGO) were successfully constructed for highly efficient heterogeneous catalytic reduction. We first synthesized a novel temperature-responsive episulfide-containing double-hydrophilic diblock copolymer, poly(poly(ethylene glycol) methyl ether methacrylate-co-2,3-epithiopropyl methacrylate)-block-poly(N-isopropylacrylamide) (P(PEGMA-co-ETMA)-b-PNIPAM), through a reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing a chain-transfer agent with a catechol unit as the end group. The obtained block copolymers can be facilely anchored to the surface of GO via mussel-inspired chemistry. The PdNPs were loaded on GO decorated with block copolymer brushes (BPrGO) as a support via the in situ reduction of palladium precursors with the episulfide ligands of the block copolymer as a stabilizer. The resulting PdNPs@BPrGO nanohybrid catalyst had good water dispersibility and stability. Furthermore, a low dosage of PdNPs@BPrGO catalyst exhibited excellent catalytic performance in the reduction of methylene blue and nitrophenols. The performance was attributed to the ability of PdNPs@BPrGO to facilitate the diffusion of reactants compared to PdNPs@GO without polymer modification. PdNPs@BPrGO also possessed an interesting temperature-responsive catalytic property due to the reversible "coil-to-globule" phase transition behaviour of PNIPAM blocks onto the surface of catalyst. The PdNPs@BPrGO catalyst was successfully recovered and reused five times without any detectible loss in catalytic activity, demonstrating its great potential in a wide range of industrial catalytic applications.

Polydopamine Nanoparticles Enhance Drug Release for Combined Photodynamic and Photothermal Therapy

Our study shows a facile two-step method which does not require the use of core templates to load a hydrophobic photosensitizer drug chlorin e6 (Ce6) within polydopamine (PDA) nanoparticles (NPs) while maintaining the intrinsic surface properties of PDA NPs. This structure is significantly different from hollow nanocapsules which are less stiff as they do not possess a core. To our knowledge, there exist no similar studies in the literature on drug loading within the polymer matrix of PDA NPs. We characterized the drug loading and release behavior of the photosensitizer Ce6 and demonstrated the therapeutic efficacy of the combined photodynamic (PDT) and photothermal therapy (PTT) from Ce6 and PDA, respectively, under a single wavelength of 665 nm irradiation on bladder cancer cells. We obtained a saturated loading amount of 14.2 ± 0.85 μM Ce6 in 1 nM PDA NPs by incubating 1 mg/mL dopamine solution with 140 μM of Ce6 for 20 h. The PDA NPs maintained colloidal stability in biological media, whereas the pi-pi (π-π) interaction between PDA and Ce6 enabled a release profile of the photosensitizer until day 5. Interestingly, loading of Ce6 in the polymer matrix of PDA NPs significantly enhanced the cell uptake because of endocytosis. An increased cell kill was observed with the combined PDT + PTT from 1 nM PDA-Ce6 compared to that with PTT alone with 1 nM PDA and PDT alone with 15 μM equivalent concentration of free Ce6. PDA-Ce6 NPs could be a promising PDT/PTT therapeutic agent for cancer therapy.

Highly Stretchable and Biocompatible Strain Sensors Based on Mussel-Inspired Super-Adhesive Self-Healing Hydrogels for Human Motion Monitoring

Integrating multifunctionality such as adhesiveness, stretchability, and self-healing ability on a single hydrogel has been a challenge and is a highly desired development for various applications including electronic skin, wound dressings, and wearable devices. In this study, a novel hydrogel was synthesized by incorporating polydopamine-coated talc (PDA-talc) nanoflakes into a polyacrylamide (PAM) hydrogel inspired by the natural mussel adhesive mechanism. Dopamine molecules were intercalated into talc and oxidized, which enhanced the dispersion of talc and preserved catechol groups in the hydrogel. The resulting dopamine-talc-PAM (DTPAM) hydrogel showed a remarkable stretchability, with over 1000% extension and a recovery rate over 99%. It also displayed strong adhesiveness to various substrates, including human skin, and the adhesion strength surpassed that of commercial double-sided tape and glue sticks, even as the hydrogel dehydrated over time. Moreover, the DTPAM hydrogel could rapidly self-heal and regain its mechanical properties without needing any external stimuli. It showed excellent biocompatibility and improved cell affinity to human fibroblasts compared to the PAM hydrogel. When used as a strain sensor, the DTPAM hydrogel showed high sensitivity, with a gauge factor of 0.693 at 1000% strain, and was capable of monitoring various human motions such as the bending of a finger, knee, or elbow and taking a deep breath. Therefore, this hydrogel displays favorable attributes and is highly suitable for use in human-friendly biological devices.

Atmospheric Plasma Deposition of Methacrylate Layers Containing Catechol/Quinone Groups: An Alternative to Polydopamine Bioconjugation for Biomedical Applications

Bioconjugation of enzymes on coatings based on polydopamine (PDA) layers is an appealing approach to control biological responses on biomedical implant surfaces. As alternative to PDA wet deposition, a fast, solvent-free, and dynamic deposition approach based on atmospheric-pressure plasma dielectric barrier discharge process is considered to deposit on metallic surfaces acrylic-based interlayers containing highly chemically reactive catechol/quinone groups. A biomimetic approach based on covalent immobilization of Dispersin B, an enzyme with antibiofilm properties, shows the bioconjugation potential of the novel plasma polymer layers. The excellent antibiofilm activity against Staphylococcus epidermidis is comparable to the PDA-based layers prepared by wet chemical methods with slow deposition rates. A study of preosteoblastic MG-63 human cell line viability and adhesion properties on plasma polymer layers demonstrates early interaction required for biomedical applications.

Critical factors for the bulk adhesion of engineered elastomeric proteins

Many protein-based materials, such as soy and mussel adhesive proteins, have been the subject of scientific and commercial interest. Recently, a variety of protein adhesives have been isolated from diverse sources such as insects, frogs and squid ring teeth. Many of these adhesives have similar amino acid compositions to elastomeric proteins such as elastin. Although elastin is widely investigated for a structural biomaterial, little work has been done to assess its adhesive potential. In this study, recombinant elastin-like polypeptides were created to probe the factors affecting adhesion strength. Lap shear adhesion was used to examine the effects of both extrinsic factors (pH, concentration, cross-linker, humidity, cure time and cure temperature) and intrinsic factors (protein sequence, structure and molecular weight). Of the extrinsic factors tested, only humidity, cure time and cure temperature had a significant effect on adhesion strength. As water content was reduced, adhesion strength increased. Of the intrinsic factors tested, amino acid sequence did not significantly affect adhesion strength, but less protein structure and higher molecular weights increased adhesion strength directly. The strengths of proteins in this study (greater than 2 MPa) were comparable to or higher than those of two commercially available protein-based adhesives, hide glue and a fibrin sealant. These results may provide general rules for the design of adhesives from elastomeric proteins.

Bioinspired Underwater Adhesives by Using the Supramolecular Toolbox

Nature has developed protein-based adhesives whose underwater performance has attracted much research attention over the last few decades. The adhesive proteins are rich in catechols combined with amphiphilic and ionic features. This combination of features constitutes a supramolecular toolbox, to provide stimuli-responsive processing of the adhesive, to secure strong adhesion to a variety of surfaces, and to control the cohesive properties of the material. Here, the versatile interactions used in adhesives secreted by sandcastle worms and mussels are explored. These biological principles are then put in a broader perspective, and synthetic adhesive systems that are based on different types of supramolecular interactions are summarized. The variety and combinations of interactions that can be used in the design of new adhesive systems are highlighted.

Facile synthesis of surface-functionalized magnetic nanocomposites for effectively selective adsorption of cationic dyes

A new magnetic nano-adsorbent, polycatechol modified Fe₃O₄ magnetic nanoparticles (Fe₃O₄/PCC MNPs) were prepared by a facile chemical coprecipitation method using iron salts and catechol solution as precursors. Fe₃O₄/PCC MNPs owned negatively charged surface with oxygen-containing groups and showed a strong adsorption capacity and fast adsorption rates for the removal of cationic dyes in water. The adsorption capacity of methylene blue (MB), cationic turquoise blue GB (GB), malachite green (MG), crystal violet (CV) and cationic pink FG (FG) were 60.06 mg g^- 1, 70.97 mg g^- 1, 66.84 mg g^- 1, 66.01 mg g^- 1 and 50.27 mg g^- 1, respectively. The adsorption mechanism was proposed by the analyses of the adsorption isotherms and adsorption kinetics of cationic dyes on Fe₃O₄/PCC MNPs. Moreover, the cationic dyes adsorbed on the MNPs as a function of contact time, pH value, temperature, coexisting cationic ions and ion strength were also investigated. These results suggested that the Fe₃O₄/PCC MNPs is promising to be used as a magnetic adsorbent for selective adsorption of cationic dyes in wastewater treatment.

Catechol End-Functionalized Polylactide by Organocatalyzed Ring-Opening Polymerization

There is a great interest in incorporating catechol moieties into polymers in a controlled manner due to their interesting properties, such as the promotion of adhesion, redox activity or bioactivity. One possibility is to incorporate the catechol as end-group in a polymer chain using a functional initiator by means of controlled polymerization strategies. Nevertheless, the instability of catechol moieties under oxygen and basic pH requires tedious protection and deprotection steps to perform the polymerization in a controlled fashion. In the present work, we explore the organocatalyzed synthesis of catechol end-functional, semi-telechelic polylactide (PLLA) using non-protected dopamine, catechol molecule containing a primary amine, as initiator. NMR and SEC-IR results showed that in the presence of a weak organic base such as triethylamine, the ring-opening polymerization (ROP) of lactide takes place in a controlled manner without need of protecting the cathechol units. To further confirm the end-group fidelity the catechol containing PLLA was characterized by Cyclic Voltammetry and MALDI-TOF confirming the absence of side reaction during the polymerization. In order to exploit the potential of catechol moieties, catechol end-group of PLLA was oxidized to quinone and further reacted with aliphatic amines. In addition, we also confirmed the ability of catechol functionalized PLLA to reduce metal ions to metal nanoparticles to obtain well distributed silver nanoparticles. It is expected that this new route of preparing catechol-PLLA polymers without protection will increase the accessibility of catechol containing biodegradable polymers by ROP.

Simple and Green Strategy for the Synthesis of "Pathogen-Mimetic" Glycoadjuvant@AuNPs by Combination of Photoinduced RAFT and Bioinspired Dopamine Chemistry

Innate immune responses recognizing pathogen associated molecular patterns (PAMPs) play a crucial role in adaptive immunity. Toll-like receptors (TLRs) and C-type lectin receptors (CLRs) contribute to antigen capture, uptake, presentation and activation of immune responses. In this contribution, metal-free reversible addition-fragmentation chain transfer (RAFT) polymerization of N-3,4-dihydroxybenzenethyl methacrylamide (DMA) and 2-(methacrylamido) glucopyranose (MAG) under sunlight irradiation using 2-cyanoprop-2-yl-α-dithionaphthalate (CPDN) as iniferter agent, can be employed to fabricate the multivalent glycopolymer containing bioresponsive sugar group and multifunctional catechol functionalities. The polymerization behavior is investigated and it presents controlled features. Moreover, bioinspired dopamine chemistry can be successfully utilized to form in situ glycopolymer-coated gold nanoparticles (AuNPs) without the need of additional reducing reagent, design "pathogen-mimetic" glycoadjuvant recognized by both CLRs and TLRs. The synthetic glycoadjuvant is found to enhance the adjuvant activity as "infected signals" in vitro.

Anti-biofouling and antibacterial surfaces via a multicomponent coating deposited from an up-scalable atmospheric-pressure plasma-assisted CVD process

Prevention of bacterial adhesion and biofilm formation on the surfaces of materials is a topic of major medical and societal importance. In this study, an up-scalable atmospheric-pressure plasma assisted deposition method is introduced to produce a multicomponent coating towards the elaboration of antibacterial and anti-biofilm surfaces. Interestingly, from a single catechol-based monomer, high deposition rates of highly chemically reactive functional thin films bearing catechol as well as quinone groups are achieved. The catechol-bearing thin film allows the in situ silver nanoparticle formation, assessed by scanning electron microscopy and EDX, whilst the enriched-quinone thin film is exploited for immobilizing dispersine B, an enzyme. In vitro functional assays demonstrated the dual antibacterial and anti-biofouling resistance properties of the coatings due to the antibacterial effect of silver and the fouling resistance of grafted dispersine B, respectively. Surfaces coated only with silver provide an antibacterial effect but fail to inhibit bacterial attachment, highlighting the usefulness of such dual-action surfaces. The approach presented here provides a simple and effective chemical pathway to construct powerful antibacterial surfaces for various industrial applications.

Biologically inspired, catechol-coordinated, hierarchical organization of raspberry-like calcium phosphate nanospheres with high specific surface area

Catechol directs the assembly of mesoporous CaP spheres with a hierarchically reticulated architecture and excellent interconnectivity.

In situ insights into the nanoscale deposition of 5,6-dihydroxyindole-based coatings and the implications on the underwater adhesion mechanism of polydopamine coatings

The biomimetic coating polydopamine (PDA) has emerged as a promising coating material for various applications. However, the mechanism of PDA deposition onto surfaces is not fully understood, and the coating components of PDA and its relation to the putative intermediate 5,6-dihydroxyindole (DHI) are still controversial. This investigation discloses the deposition mechanisms of dopamine (DA)-based coatings and DHI-based coatings onto silicon surfaces by monitoring the nanoscale deposition of both coatings in situ using high-precision ellipsometry. We posit that the rapid and instantaneous nano-deposition of PDA coatings onto silicon surface in the initial stages critically involves the oxidation of DHI and/or its related oligomers. Our studies also show that the slow conversion of DA to DHI in PDA solution and the coupling between DA and DHI-derived precursors could be crucial for subsequent PDA coating growth. These findings elucidate the critical role of DHI, acting as an ‘initiator’ and a ‘cross linker’, in the PDA coating formation. Overall, our study provides important information on the early stage nano-deposition behavior in the construction of PDA coatings and DHI-based coatings.

The underwater in situ nano-deposition studies of 5,6-dihydroxyindole (DHI) have provided new insights into the controversial deposition mechanism(s) of DHI-based and polydopamine-based coatings.

A multinuclear NMR perspective on the complexation between bisboronic acids and bisbenzoxaboroles with cis-diols

A new way of using solution NMR (especially ¹⁹F NMR) to study organoboron molecule/cis-diol equilibria is presented.