Extracellular polymeric substances of biofilms: Suffering from an identity crisis

Single and combined effects of amino polystyrene and perfluorooctane sulfonate on hydrogen-producing thermophilic bacteria and the interaction mechanisms

As a carrier of perfluorooctane sulfonate, nano-plastics are ubiquitous and finally enriched in the sludge, which is widely used as a raw material for the production of bioenergy (hydrogen or methane) by anaerobic digestion. However, there are still many unknowns about their metabolic toxicity to functional microbes (e.g. hydrogen-producing thermophilic bacteria). Therefore, single and combined effects of amino polystyrene (NPS: 70 nm; 0.2 mg/L) and perfluorooctane sulfonate (PFOS: 0.1, 1 and 5 mg/L) on hydrogen-producing thermophilic bacteria were investigated after exposure for 7 days at 55 °C and pH = 5.7. Single NPS exhibited obvious interference to the metabolism of thermophilic bacteria, resulting in a 53.9% reduction in hydrogen production. However, the combined NPS + PFOS produced an antagonistic effect, leading to a 31.6% reduction in hydrogen production. Nonetheless, the single and combined exposure did not alter the type of hydrogen production (acetic acid-type hydrogen fermentation). Moreover, single NPS and combined NPS + PFOS not only induced the changes of the composition of extracellular polymers (EPSs) and π bond structure of the protein in EPSs, but also decreased the activity of hydrolase in EPSs and surface charge of EPSs. Compared to single NPS exposure, NPS + PFOS-exposed thermophilic bacteria was less permeable to a semi-membrane permeable dye and produced less reactive oxygen species, but were still significantly higher than control group. In short, the main mechanisms of single NPS and combined NPS + PFOS were both to increase cell permeability and to induce oxidative stress. The addition of PFOS alleviated the toxic effect of NPS, but did not change its mechanism of toxicity.

Aerobic granular sludge contains Hyaluronic acid-like and sulfated glycosaminoglycans-like polymers

Glycosaminoglycans (GAGs) are linear heteropolysaccharides containing a derivative of an amino sugar. The possibility of the presence of GAGs in aerobic granular sludge was studied by combining SDS-PAGE with Alcian Blue staining (at pH 2.5 and 1), FTIR, mammalian Hyaluronic acid and sulfated GAG analysis kits, enzymatic digestion and specific in situ visualization by Heparin Red and lectin staining. GAGs, including Hyaluronic acid-like and sulfated GAGs-like polymers were found in aerobic granular sludge. The sulfated GAGs-like polymers contained Chondroitin sulfate and Heparan sulfate/Heparin based on their sensitivity to the digestion by Chondroitinase ABC and Heparinase I & III. Heparin Red and lectin staining demonstrated that, the sulfated GAGs-like polymers were not only present in the extracellular matrix, but also filled in the space between the cells inside the microcolonies. The GAGs-like polymers in aerobic granules were different from those produced by pathogenic bacteria but resemble those produced by vertebrates. Findings reported here and in previous studies on granular sludge described in literature indicate that GAGs-like polymers might be widespread in granular sludge/biofilm and contribute to the stability of these systems. The extracellular polymeric substances (EPS) in granular sludge/biofilm are far more complicated than they are currently appreciated. Integrated and multidisciplinary analyses are significantly required to study the EPS.

Solubilization and characterization of extracellular proteins from anammox granular sludge

Elucidating the extracellular polymeric substances (EPS) of anammox granular sludge is important for stable nitrogen removal processes in wastewater treatment. However, due to a lack of standardized methods for extraction and characterization, the composition of anammox granule EPS remains mostly unknown. In this study, alkaline (NaOH) and ionic liquid (IL) extractions were compared in terms of the proteins they extracted from different "Candidatus Brocadia" cultures. We aimed to identify structural proteins and evaluated to which extend these extraction methods bias the outcome of EPS characterization. Extraction was focussed on solubilization of the EPS matrix, and the NaOH and IL extraction recovered on average 20% and 26% of the VSS, respectively. Using two extraction methods targeting different intermolecular interactions increased the possibility of identifying structural extracellular proteins. Of the extracted proteins, ∼40% were common between the extraction methods. The high number of common abundant proteins between the extraction methods, illustrated how extraction biases can be reduced when solubility of the granular sludge is enhanced. Physicochemical analyses of the granules indicated that extracellular structural matrix proteins likely have β-sheet dominated secondary structures. These β-sheet structures were measured in EPS extracted with both methods. The high number of uncharacterized proteins and possible moonlighting proteins confounded identifying structural (i.e. β-sheet dominant) proteins. Nonetheless, new candidates for structural matrix proteins are described. Further current bottlenecks in assigning specific proteins to key extracellular functions in anammox granular sludge are discussed.

Insight into the fenton-induced degradation process of extracellular polymeric substances (EPS) extracted from activated sludge

Although EPS in microbial aggregates are importance in successful implementation of biological wastewater treatment systems, they also exhibit detrimental role on certain circumstance, such as excess sludge dewatering. Extensive efforts have been put into the disruption of EPS for improving the dewaterability of excess sludge and Fenton's reagent treatment has been demonstrated to be a very promising sludge conditioning method for EPS destruction. However, the information regarding detailed degradation process of EPS during Fenton's reagent treatment is limited. In this study, EPS were extracted from activated sludge and treated with different concentrations of Fenton's reagent. The physicochemical characteristic changes of EPS under different treatment were investigated in terms of components, EEM, molecular weight (MW), UV-Vis and FTIR. The results showed that EPS were prone to be disintegrated, but hard to be fully mineralized. Humic substances in EPS were more resistant to Fenton's reagent than other components. Low MW components of EPS were preferentially degraded prior to the disruption of high MW components. Besides, the disintegration of EPS into lower MW ones was accompanied by the formation of higher MW compounds caused by the bridge interaction of Fe ions. The cleavage of protein's backbone in EPS was mainly through destruction of amide II (N-H and C-N) in -CO-NH-. Fenton's reagent treatment also led to a significant increase of oxygen-containing functional groups in EPS molecules. This paper may pave a path to deeply understand the mechanisms of dewatering improvements of excess sludge by Fenton's conditioning.

Microfluidic System for Observation of Bacterial Culture and Effects on Biofilm Formation at Microscale

Biofilms exist in the natural world and applied to many industries. However, due to the variety of characteristics caused by their complex components, biofilms can also lead to membrane fouling and recurrent infections which pose threats to human health. So, to make the best use of their advantages and avoid their disadvantages, knowing the best time and methods for improving or preventing biofilm formation is important. In situ observation without fluorescence labeling in microscale and according to a time scale is useful to research biofilm and confine its formation. In this study, we developed a microfluidic system for real-time observation of bacteria culture and biofilms development at microscale. We cultured E. coli ATCC 25922 on a chip at continuous flow of the velocity, which could promote bacterial formation. Biofilms formation under the condition of adding amoxicillin at different times is also discussed. In addition, the mixed strains from sludge were also cultured on chip, and possible factors in biofilm formation are discussed. Our results show that a microfluidic device could culture microorganisms in continuous flow and accelerate them to adhere to the surface, thereby promoting biofilm formation. Overall, this platform is a useful tool in research on initial biofilm formation, which can contribute to preventing biofouling and infections.

Re-Potentiation of β-Lactam Antibiotic by Synergistic Combination with Biogenic Copper Oxide Nanocubes against Biofilm Forming Multidrug-Resistant Bacteria

Biofilm-associated tissue and device infection is a major threat to therapy. The present work aims to potentiate β-lactam antibiotics with biologically synthesized copper oxide nanoparticles. The synergistic combination of amoxyclav with copper oxide nanoparticles was investigated by checkerboard assay and time-kill assay against bacteria isolated from a burn wound and a urinary catheter. The control of biofilm formation and extracellular polymeric substance production by the synergistic combination was quantified in well plate assay. The effect of copper oxide nanoparticles on the viability of human dermal fibroblasts was evaluated. The minimum inhibitory concentration and minimum bactericidal concentration of amoxyclav were 70 μg/mL and 140 μg/mL, respectively, against Proteus mirabilis and 50 μg/mL and 100 μg/mL, respectively, against Staphylococcus aureus. The synergistic combination of amoxyclav with copper oxide nanoparticles reduced the minimum inhibitory concentration of amoxyclav by 16-fold against P. mirabilis and 32-fold against S. aureus. Above 17.5 μg/mL, amoxyclav exhibited additive activity with copper oxide nanoparticles against P. mirabilis. The time-kill assay showed the efficacy of the synergistic combination on the complete inhibition of P. mirabilis and S. aureus within 20 h and 24 h, respectively, whereas amoxyclav and copper oxide nanoparticles did not inhibit P. mirabilis and S. aureus until 48 h. The synergistic combination of amoxyclav with copper oxide nanoparticles significantly reduced the biofilm formed by P. mirabilis and S. aureus by 85% and 93%, respectively. The concentration of proteins, carbohydrates, and DNA in extracellular polymeric substances of the biofilm was significantly reduced by the synergistic combination of amoxyclav and copper oxide nanoparticles. The fibroblast cells cultured in the presence of copper oxide nanoparticles showed normal morphology with 99.47% viability. No cytopathic effect was observed. Thus, the study demonstrated the re-potentiation of amoxyclav by copper oxide nanoparticles.

Hydrogels formed by anammox extracellular polymeric substances: structural and mechanical insights

The recovery of biopolymers from the waste sludge produced in wastewater treatments and their application in other industrial sectors, would substantially increase the environmental and economical sustainability of the process, promoting the development of a circular economy. In this study, extracellular polymeric substances (EPS) extracted from anammox granular waste sludge, were investigated and characterized. Rheological and differential scanning calorimetry measurements on EPS aqueous dispersions indicate the formation of an extended 3-D network above a threshold concentration, with a clear dependence of the mechanical and water retention properties on EPS content. The structural characterization, performed with transmission electron microscopy and small angle X-ray scattering, reveals the presence of functional amyloids as putative structural units, observed for the first time in an EPS-based hydrogel. As a proof of concept of the applicative potential, we explored the water and grease resistance provided to paper by an EPS coating. These results shed light on the structural details of EPS-based hydrogels, and pave the way for the possible use of EPS-based materials as a cheap, eco-friendly alternative to commonly adopted paper coatings, in line with a circular economy pattern for wastewater treatment.

Accumulation of NH4 + and NO3 - inside Biofilms of Natural Microbial Consortia: Implication on Nutrients Seasonal Dynamic in Aquatic Ecosystems

Microbial biofilms are ubiquitous in aquatic ecosystems. Inside the biofilm is the nutrient-rich microenvironment promoted by the accumulation of the nutrient ions such as NH4 + and NO3 - from surrounding water. The present study investigated the characteristics of NH4 + and NO3 - accumulation into the biofilm of natural microbial consortia collected from Lake Biwa, Japan. The results showed the following: (1) the concentrations of NH4 + and NO3 - inside the biofilm were much higher than those in the surrounding water; (2) the nutrient ion concentration inside the biofilm changed in synchrony with those in the surrounding water; (3) biofilm polymers have both positively and negatively charged sites; (4) electrostatic attractive interactions between the charged sites on biofilm polymers and oppositely charged ions outside the biofilm seem to play important roles in the accumulation of nutrient ions into the biofilm from the surrounding water; (5) the bacterial community structure differs between the biofilm and surrounding water. The present study revealed that the accumulation of nutrient ions into the biofilm indicates the removal of these ions from water outside the biofilm. According to the result of this study, accumulation of ions such as NH4 + and NO3 - into the biofilm of natural microbial consortia may have implications on nutrients seasonal dynamic in aquatic ecosystems.

Big Impact of the Tiny: Bacteriophage-Bacteria Interactions in Biofilms

Bacteriophages (phages) have been shaping bacterial ecology and evolution for millions of years, for example, by selecting for defence strategies. Evidence supports that bacterial biofilm formation is one such strategy and that biofilm-mediated protection against phage infection depends on maturation and composition of the extracellular matrix. Interestingly, studies have revealed that phages can induce and strengthen biofilms. Here we review interactions between bacteria and phages in biofilms, discuss the underlying mechanisms, the potential of phage therapy for biofilm control, and emphasize the importance of considering biofilms in future phage research. This is especially relevant as biofilms are associated with increased tolerance towards antibiotics and are implicated in the majority of chronic infections.

Biofilm systems as tools in biotechnological production

The literature provides more and more examples of research projects that develop novel production processes based on microorganisms organized in the form of biofilms. Biofilms are aggregates of microorganisms that are attached to interfaces. These viscoelastic aggregates of cells are held together and are embedded in a matrix consisting of multiple carbohydrate polymers as well as proteins. Biofilms are characterized by a very high cell density and by a natural retentostat behavior. Both factors can contribute to high productivities and a facilitated separation of the desired end-product from the catalytic biomass. Within the biofilm matrix, stable gradients of substrates and products form, which can lead to a differentiation and adaptation of the microorganisms' physiology to the specific process conditions. Moreover, growth in a biofilm state is often accompanied by a higher resistance and resilience towards toxic or growth inhibiting substances and factors. In this short review, we summarize how biofilms can be studied and what most promising niches for their application can be. Moreover, we highlight future research directions that will accelerate the advent of productive biofilms in biology-based production processes.

Extraction, recovery and characterization of structural extracellular polymeric substances from anammox granular sludge

The composition and colloidal properties of extracellular polymeric substances (EPS) from anammox granular sludge were investigated through a complete set of spectroscopic and scattering techniques. To fully characterize EPS, we developed a robust and reproducible extraction/recovery protocol specific for anammox biofilms, based on the change of water affinity under alternated alkaline and acidic conditions, each monitored with Z-potential and dynamic light scattering analysis. This method enabled both extraction as a colloidal suspension and recovery as a solid of large amounts of EPS (0.38 ± 0.04 and 0.21 ± 0.02 g/g, respectively), including for the first time its structural components. The dominance of the proteinaceous fraction was revealed by all methods tested, resulting in the highest protein/carbohydrates ratio reported for biofilms applied in the wastewater sector. The abundance of proteinaceous ordered structures and in particular of cross-β motifs was detected, indicating for the first time the presence of amyloid-like aggregates in anammox EPS, and suggesting the key role of the protein fraction in determining the mechanical properties of the parent biofilm. The robustness and reproducibility of the proposed method fill the current gap towards a reliable full-scale recovery as well as towards an accurate and meaningful investigation of anammox EPS and pave the way for further exploration of their applicative potential thus stimulating the desirable shift from the current wastewater treatment perspective towards biorefinery in a circular economy context.