Modulating insulin-release profile from pH/thermosensitive polymeric beads through polymer molecular weight

Release kinetics of bovine serum albumin from pH-sensitive poly(vinyl ether) based hydrogels

pH-Sensitive amphiphilic hydrogels were synthesized by radiation copolymerization of ethylene glycol vinyl ether (EGVE), butyl vinyl ether (BVE) and acrylic acid (AA) in the presence of crosslinking agent, diethylene glycol divinyl ether (DEGDVE). The results of the swelling experiments indicated that the hydrogel which has 60:40:5 comonomer ratio (mol% of EGVE:BVE:AA in monomeric mixture) is pH-sensitive. While the hydrogel is in a fully hydrated form at pH>6, it extensively dehydrates below pH 6. A two-stage volume phase transition was observed in the range of pH 6.0-7.0 and 7.5-8.0. In addition, the equilibrium water contents of the gels decreased with increasing temperature from 4 to 37 degrees C by following the non-Fickian diffusion mechanism. The utility of pH-sensitive gels in delivery of protein based drugs was investigated. Bovine serum albumin (BSA) loaded gels were prepared and protein release was examined by fluorescence spectroscopy in the range of pH 2-9. While the protein release was very low at pH 2, readily high amount of BSA were released at pH>6. It was concluded that the pH-sensitive EGVE-BVE-AA terpolymers may be suitable for the oral administration of protein based drugs as a carrier through gastrointestinal (GI) tract.

Poly(vinyl alcohol) and poly(acrylic acid) sequential interpenetrating network pH-sensitive microspheres for the delivery of diclofenac sodium to the intestine

Sequential interpenetrating network (IPN) of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) were prepared and crosslinked with glutaraldehyde (GA) to form pH-sensitive microspheres by the water-in-oil (w/o) emulsification method. Microspheres were used to deliver a model anti-inflammatory drug, diclofenac sodium (DS), to the intestine. The formed IPN was analyzed by Fourier transform infrared spectroscopy (FTIR). Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analyses were done on the drug-loaded microspheres to confirm the polymorphism of DS. Results indicated a molecular level dispersion of DS in the IPN. Microspheres formed were spherical with the smooth surfaces as evidenced by scanning electron microscopy (SEM). Particle size and size distribution was studied using laser light diffraction particle size analyzer. Particle size analysis was also done by optical microscope for the selected microspheres; the change in diameter of the microspheres when soaked in different media at different time intervals was measured by optical microscope. Microspheres showed a pulsatile swelling behavior when the pH of the swelling media was changed. The swelling data were fitted to an empirical equation to understand the phenomenon of water transport as well as to calculate the diffusion coefficient (D). Values of D in acidic media were lower than those found in basic media. The values of D decrease with increasing crosslinking of the matrix. In-vitro release studies have been performed in 1.2 and 7.4 pH media to simulate gastric and intestinal conditions. The results indicated a dependence on the pH of the release media, extent of crosslinking and the amount of drug loading.

Synthesis and characterization of partially biodegradable, temperature and pH sensitive Dex–MA/PNIPAAm hydrogels

The objective of the study is to impart temperature and pH-sensitive capabilities to polysaccharide-based hydrogels, so that they can change their swelling property upon external stimulation like temperature or/and pH. Dextran was chosen as the model polysaccharide compound for such a demonstration. A novel class of dextran-maleic anhydride (Dex-MA)/poly(N-isopropylacrylamide) hybrid hydrogels was designed and synthesized by UV photocrosslinking. The dextran-based precursor (Dex-MA) was prepared by substituting the hydroxyl groups in Dex by MA. This Dex-MA precursor was then photocrosslinked with a known temperature sensitive precursor (N-isopropylacrylamide, NIPAAm) to form hybrid hydrogels having a wide range of composition ratio of Dex-MA to NIPAAm precursors. Due to the biodegradable nature of dextran, these Dex-MA/PNIPAAm hybrid hydrogels are partially biodegradable. These smart hybrid hydrogels were characterized by Fourier transform infrared spectroscopy for structural determination, differential scanning calorimertry for thermal property, maximum swelling ratio, swelling kinetics, temperature response kinetics, and effect of pH. The data obtained clearly show that these new smart hybrid hydrogels were responsive to the external changes of temperature as well as pH. The magnitude of smart and hydrogel properties of these hybrid hydrogels were found to depend on the feed composition ratio of the two precursors. By changing the composition ratio of these two precursors, the phase transition temperature (lower critical solution temperature) of the hybrid hydrogels could also be adjusted to be or near the body temperature for the potential applications in bioengineering and biotechnology fields.

Cross-linked high amylose starch derivatives for drug release

Acetate (Ac-), aminoethyl (AE-), and carboxymethyl (CM-) high amylose starch cross-linked 6 (HASCL-6) derivatives were previously shown to control the release of drugs over 20 h from monolithic tablets highly loaded (up to 60% drug). This report describes the swelling characteristics, which allow a better understanding of the mechanisms involved in the control of the drug release from the said polymeric matrices. The tablet swelling of HASCL-6, Ac-HASCL-6, and AE-HASCL-6 was found to not be affected by the ionic strength and by the pH between 1.2 (gastric) and 7 (intestinal), whereas the swelling of CM-HASCL-6 was shown to depend on both ionic strength and pH of the release medium. For all the studied polymers the drug loading did not change the equilibrium swelling ratio but affected the initial swelling velocity, seemingly due to the competition between drug and polymer for water uptake, a phenomenon probably influenced by the loading and the drug solubility. It was also shown that the increase of ionic strength would slightly increase the drug release time probably by decreasing the amount of free water still available to solubilize the drug present into the matrix.

Novel Method Using a Temperature-Sensitive Polymer (Methylcellulose) to Thermally Gel Aqueous Alginate as a pH-Sensitive Hydrogel

A novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate blended with distinct salts (CaCl2, Na2HPO4, or NaCl), as a pH-sensitive hydrogel was developed for protein drug delivery. It was noted that the salts blended in hydrogels may affect the structures of an entangled network of methylcellulose and alginate and have an effect on their swelling characteristics. The methylcellulose/alginate hydrogel blended with 0.7 M NaCl (with a gelation temperature of 32 degrees C) demonstrated excellent pH sensitivity and was selected for the study of release profiles of a model protein drug (bovine serum albumin, BSA). In the preparation of drug-loaded hydrogels, BSA was well-mixed to the dissolved aqueous methylcellulose/alginate blended with salts at 4 degrees C and then gelled by elevating the temperature to 37 degrees C. This drug-loading procedure in aqueous environment at low temperature may minimize degradation of the protein drug while achieving a high loading efficiency (95-98%). The amount of BSA released from test hydrogels was a function of the amount of alginate used in the hydrogels. The amount of BSA released at pH 1.2 from the test hydrogel with 2.5% alginate was relatively low (20%), while that released at pH 7.4 increased significantly (86%). In conclusion, the methylcellulose/alginate hydrogel blended with NaCl could be a suitable carrier for site-specific protein drug delivery in the intestine.

Gradient micropattern immobilization of a thermo‐responsive polymer to investigate its effect on cell behavior

A gradient micropattern immobilization technique using a photomask was developed to investigate by microscopic observation the effect of the surface concentration of an immobilized thermo-responsive polymer. Poly(N-isopropylacrylamide-co-acrylic acid) was chosen as the thermo-responsive polymer, and was conjugated with 4-azidoaniline to form a photo-reactive thermo-responsive polymer (PIA-Az). The PIA-Az was coated onto a polystyrene plate, and immobilized using UV irradiation in the presence of a gradient micropattern photomask. The immobilization was performed with and without gelatin. Mouse fibroblast STO cells cultured on the plate did not adhere to the surface when PIA-Az had a high surface density, and no cell detachment was observed in any region when the temperature was lowered. However, on the gelatin coimmobilized surfaces, the cells adhered to all surfaces independent of the PIA-Az density, and detached from the high PIA-Az surface density areas when the temperature was lowered. The present technique demonstrates the effect of the surface concentration-dependent immobilization of the molecules. We show that cell detachment can be regulated by perturbating a small part of the cell-immobilized polymer interface.

Thermo-Responsive PNiPAAm-g-PEG Films for Controlled Cell Detachment

A series of graft copolymers consisting of either poly(N-isopropylacrylamide) (PNiPAAm) or poly(N,N-diethylacrylamide) (PDEAAm) as a thermo-responsive component in the polymer backbone and poly(ethyleneglycol) (PEG) were immobilized as thin films and cross-linked on a fluoropolymer substrate using low-pressure argon plasma treatment. The surface-immobilized hydrogels exhibit a transition from partially collapsed to completely swollen, which is in the range of 32-35 degrees C and corresponds to the lower critical solution temperature of the soluble polymers. The hydrogels were used as cell carriers in culture experiments with L929 mouse fibroblast cells to probe for cell adhesion, proliferation, and temperature-dependent detachment of cell layers. The fibroblast cells adhere, spread, and proliferate on the hydrogel layers at 37 degrees C and become completely detached after reducing the temperature by 3 K. The cell release characteristics were further correlated to the swelling and collapsing behavior of the hydrogel films and the polymer solutions as measured in PBS solution and RPMI cell cultivation medium. It could be shown that, long before the swelling has completed upon temperature reduction, the cells detach. This can be attributed to the large content of PEG present in the hydrogel, which weaken the cell adhesion strength to the hydrogel layers.

Thermo- and pH-responsive biodegradable poly(alpha-N-substituted gamma-glutamine)s

New double stimuli-responsive poly(alpha-N-substituted gamma-glutamine) has been developed, which was synthesized by the reaction of poly(gamma-glutamic acid) with amino alcohols. Appropriate combinations of the amino alcohols provided the biodegradable poly(amino acid) exhibiting a sharp lower critical solution temperature (LCST) in water. Furthermore, the phase transition temperature was highly sensitive to pH changes.

Release characteristics of novel pH-sensitive p(HEMA-DMAEMA) hydrogels containing 3-(trimethoxy-silyl) propyl methacrylate

An amphiphilic hydrogel of poly(2-hydroxyethyl methacrylate) cross-linked with tetraethyleneglycol diacrylate (TEGDA) was synthesized to contain the hydrophobic monomer 3-(trimethoxy-silyl) propyl methacrylate (PMA) and the pH-responsive, hydrophilic monomer N',N'-dimethylaminoethyl methacrylate (DMAEMA). The gels were separately loaded with two biomolecular probes, insulin and protamine, via both physical entrapment and equilibrium imbibition methods. The release profiles for these biomolecular probes, possessing similar MW (5.7 and 4-6 kDa, respectively) but different pI's (5.3 and 10.0, respectively), were investigated with respect to variation in the pH of the bathing medium as well as the DMAEMA content, and the cross-link density of the hydrogel. Gels exhibited classical Fickian diffusion release profiles. For a typical gel composition 66:15:10:09 mol % (HEMA:DMAEMA:PMA:TEGDA), as the pH of the release media decreased from 7.3 to 4.0, the rate of release of both biomolecular probes increased. When loaded via entrapment, the insulin release rate increased ca. 4-fold (1.0-3.7 x 10(-7) cm(2) s(-1)), whereas that of protamine increased 10-fold (0.3-3.3 x 10(-7) cm(2) s(-1)). When loaded by imbibition, the insulin diffusion coefficient increased 2-fold (3.8-7.2 x 10(-7) cm(2) s(-1)), whereas that of protamine increased 3-fold (1.9-5.5 x 10(-7) cm(2) s(-1)). The reduction of pH, through its protonation of the gel network, has a more dramatic influence on protamine release, the result of its higher pI (10.0) compared to that of insulin (5.3). As the DMAEMA content of the hydrogel was increased from 0 to 20 mol %, the diffusion coefficient of protamine increased by ca. 7-fold (1.7-12.2 x 10(-7) cm(2) s(-1)), whereas that of insulin increased only ca. 2-fold (1.7-4.0 x 10(-7) cm(2) s(-1)). This differential release confirms the role of internal protonation in effecting the greater release of the protonated drug molecule. Increasing the TEGDA content from 3 to 15 mol % reduced the diffusion coefficient ca. 3-fold for insulin (1.6-0.5 x 10(-7) cm(2) s(-1)) and 5-fold for protamine (4.0-0.8 x 10(-7) cm(2) s(-1)). The final D(ip) at 15 mol % TEGDA suggests that the smaller mesh size offsets any differential release that arises from protonation. The presence of PMA in the hydrogel formulation, which contributes additional cross-links by reason of the formation of siloxane macromers, did not change the usually observed Fickian diffusion mechanism.

Interactions of temperature-responsive anionic polyelectrolytes with a cationic surfactant

The interactions of temperature-responsive copolymers of sodium 2-acrylamido-2-methyl-1-propanesulfonate (AMPS) and N-isopropylacrylamide (NIPAM) with a cationic surfactant, dodecyltrimethylammonium chloride (DTAC), have been studied. The content of AMPS in the copolymers ranged from 1.1 to 9.6 mol%. The surface activity was higher for the polymers with lower AMPS content. It was found that DTAC undergoes association with the polymer chain, forming mixed polymer-surfactant micelles. The values of cac for the polymers were found in fluorescence studies using pyrene as the fluorescent probe. They were in the range 0.9-3.6x10(-3) M and were lower for polymers with higher AMPS content. An increase in DTAC concentration up to about its cmc results in a decrease of the LCST (lower critical solution temperature) of the copolymers, while further increase above the cmc results in an increase of the LCST. The minimum value of LCST in the presence of the surfactant is lower than the LCST of NIPAM homopolymer.

pH-modulated release of insulin entrapped in a spontaneously formed hydrogel system composed of two water-soluble phospholipid polymers

To develop a polypeptide drug carrier through oral administration, a polymer hydrogel has been found that is very easy to prepare by mixing two water-soluble phospholipid polymers. The polymers having 2-methacryloyloxyethyl phosphorylcholine (MPC) moieties spontaneously formed a hydrogel, which showed controllable dissociation via pH changes. In this study, the MPC polymer hydrogel was prepared from aqueous solutions containing water-soluble poly[MPC-co-methacrylic acid (MA)] (PMA) and poly[MPC-co-n-butyl methacrylate (BMA)] (PMB), and the applicability of the hydrogel as an oral drug delivery carrier was examined. The gelation process from the two MPC polymers is spontaneous, requiring no chemical reactions and/or no physical stimuli. PMB has a hydrophobic domain, which is suitable for loading hydrophobic drugs. Insulin could be very easily loaded to almost 100% in the hydrogel. PMA also has carboxyl groups, which are well known for pH sensitivity. At pH 1.8, the swelling continued for 8 h, with complete dissociation after 16 h. At pH 6.8, the hydrogel completely dissociated within 4 h. The hydrogel remained stable at pH 1.8 and released all the insulin at pH 6.8. The release rate was approximately four times faster at pH 6.8. After release, the insulin did not show any denaturing tendency.

Copolymerization of 2-carboxyisopropylacrylamide with N-isopropylacrylamide accelerates cell detachment from grafted surfaces by reducing temperature

Acrylic acid (AAc) has been utilized to introduce reactive carboxyl groups to a temperature-responsive polymer, poly(N-isopropylacrylamide) (PIPAAm). However, AAc introduction shifts the copolymer phase transition temperatures higher and dampens the steep homopolymer phase transition with increasing AAc content. We previously synthesized 2-carboxyisopropylacrylamide (CIPAAm) having both a similar side chain structure to IPAAm and a functional carboxylate group in order to overcome these shortcomings. In the present study, these copolymers, grafted onto cell culture plastic, were assessed for cell adhesion control using their phase transition. AAc introduction to PIPAAm-grafted surfaces resulted in excessive surface hydration and hindered cell spreading in culture at 37 degrees C. In contrast, CIPAAm-containing copolymer-grafted surfaces exhibited relatively weak hydrophobicity similar to both homopolymer PIPAAm-grafted surfaces as well as commercial ungrafted tissue culture polystyrene dish surfaces. Cells adhered and spread well on these surfaces at 37 degrees C in culture. As observed previously on PIPAAm-grafted surfaces, cells were spontaneously detached from the copolymer-grafted surfaces by reducing culture temperature. Cell detachment was accelerated on the CIPAAm copolymer-grafted surfaces compared to pure IPAAm surfaces, suggesting that hydrophilic carboxyl group microenvironment in the monomer and polymer is important to accelerate grafted surface hydration below the lower critical solution temperature, detaching cells.

Stimulus-responsive "smart" hydrogels as novel drug delivery systems

Recently, there has been a great deal of research activity in the development of stimulus-responsive polymeric hydrogels. These hydrogels are responsive to external or internal stimuli and the response can be observed through abrupt changes in the physical nature of the network. This property can be favorable in many drug delivery applications. The external stimuli can be temperature, pH, ionic strength, ultrasonic sound, electric current, etc. A majority of the literature related to the development of stimulus-responsive drug delivery systems deals with temperature-sensitive poly(N-isopropyl acrylamide) (pNIPAAm) and its various derivatives. However, acrylic-based pH-sensitive systems with weakly acidic/basic functional groups have also been widely studied. Quite recently, glucose-sensitive hydrogels that are responsive to glucose concentration have been developed to monitor the release of insulin. The present article provides a brief introduction and recent developments in the area of stimulus-responsive hydrogels, particularly those that respond to temperature and pH, and their applications in drug delivery.

Drug release profiles from and degradation of a novel biodegradable polymer, 2,2-bis(2-oxazoline) linked poly(epsilon -caprolactone)

In the present study, poly (epsilon -caprolactone) (PCL) was modified by introducing oxamide groups into PCL (PCL-O). The degradation (decrease in molecular weight) and erosion (weight loss) of PCL and PCL-O films were studied in PBS (pH 7.4, USP XXIV, 37 degrees C, 26 weeks incubation). The release rates of guaifenesin (M(w) 198.2), griseofulvin (M(w) 352.8), timolol (M(w) 332.4), sodium salicylate (M(w) 160.1) and FITC-dextran (M(w) 4400) from PCL and PCL-O preparations (solvent cast films, compression-molded plates, midi injection-molded rods and microparticles) were examined in PBS (pH 7.4, 37 degrees C). The degradation rate of PCL-O film was faster than that of PCL film while no erosion was observed for either film. When compared to the corresponding drug release from PCL films, the release rates of low molecular weight drugs (M(w)< or =352.8) from PCL-O films were comparable, their releases from both films following closely square-root-of-time kinetics. These results indicate that the oxamide groups had no substantial effect on the release of the low molecular weight drugs. The exception was sodium salicylate which was released faster from PCL-O film. However, FITC-dextran release was notably faster from PCL-O microparticles than from those made of PCL. FITC-dextran release was a combination of diffusion and polymer degradation and thus, the faster degradation of PCL-O enhanced the release of FITC-dextran. In conclusion, the effects of the oxamide groups on drug release profiles were dependent on the drug release mechanisms.

Degradation of and drug release from a novel 2,2-bis(2-oxazoline) linked poly(lactic acid) polymer

The degradation rate of poly(lactic acid) (PLA) is typically modified by copolymerization of the glycolide with lactide. In the present study, the degradation rate of PDLLA was modified by a novel linking of PLA with 2,2'-bis(2-oxazoline). This modification resulted in formation of a more rapidly degrading poly(ester amide) (PEA) for controlled drug release. The hydrolytic degradation of PDLLA and PEA films was studied in PBS (pH 7.4, USP XXIV, 37 degrees C); the resulting decrease in molecular weight was determined by size exclusion chromatography and the weight loss of films was measured. Drug releases of guaifenesin (mw 198.2), timolol (mw 332.4), sodium salicylate (mw 160.1) and FITC-dextran (mw 4400) from PDLLA and PEA films and microspheres were examined in PBS (pH 7.4, 37 degrees C). The degradation rate of PEA was substantially greater than that of PDLLA. The release profiles of all small model drugs (mw <332.4) from PDLLA films were biphasic or triphasic, while the release profiles of small model drugs from PEA films varied extensively. Due to the faster weight loss of PEA, FITC-dextran (mw 4400) was released substantially more rapidly from PEA microspheres than from PDLLA microspheres. In conclusion, all model drugs, except guaifenesin, were released faster from PEA preparations than from PDLLA preparations.

Thermosensitive sol-gel reversible hydrogels

Aqueous polymer solutions that are transformed into gels by changes in environmental conditions, such as temperature and pH, thus resulting in in situ hydrogel formation, have recently attracted the attention of many investigators for scientific interest and for practical biomedical or pharmaceutical applications. When the hydrogel is formed under physiological conditions and maintains its integrity for a desired period of time, the process may provide various advantages over conventional hydrogels. Because of the simplicity of pharmaceutical formulation by solution mixing, biocompatibility with biological systems, and convenient administration, the pharmaceutical and biomedical uses of the water-based sol-gel transition include solubilization of low-molecular-weight hydrophobic drugs, controlled release, labile biomacromolecule delivery, such as proteins and genes, cell immobilization, and tissue engineering. When the formed gel is proven to be biocompatible and biodegradable, producing non-toxic degradation products, it will provide further benefits for in vivo applications where degradation is desired. It is timely to summarize the polymeric systems that undergo sol-gel transitions, particularly due to temperature, with emphasis on the underlying transition mechanisms and potential delivery aspects. This review stresses the polymeric systems of natural or modified natural polymers, N-isopropylacrylamide copolymers, poly(ethylene oxide)/poly(propylene oxide) block copolymers, and poly(ethylene glycol)/poly(D,L-lactide-co-glycolide) block copolymers.

Cross-linked high amylose starch derivatives as matrices for controlled release of high drug loadings

Selection of hydrogels as excipients in controlled drug release systems depends on the characteristics of the gel and of the drug. Three types of derivatives were synthesized from cross-linked high amylose starch (HASCL-6) by substitution of hydroxylic groups with cationic (carboxymethyl: CM), anionic (aminoethyl: AE) and acetate (Ac) groups. These new polymeric excipients are able to control the release over 20 h from monolithic tablets loaded with 20 to 60% drug. Three drugs were used as model tracer: acetaminophen (uncharged), acetylsalicylic acid (having an acidic group) and metformin (having a basic group). It was found that the release of ionic drugs from CM-HASCL-6 and AE-HASCL-6 matrices can be partially controlled by ionic interaction between pendant groups of polymer and drugs. The substitution degree of HASCL-6 derivatives can also be varied to modulate the drug's release time. These derivatives represent a novel generation of pharmaceutical excipients, recommended for high loading dosage formulations.

Chemically modified polyacrylamide-g-guar gum-based crosslinked anionic microgels as pH-sensitive drug delivery systems: preparation and characterization

New spherically shaped cross-linked hydrogels of polyacrylamide-grafted guar gum were prepared by the emulsification method. These were selectively derivatized by saponification of the -CONH2 group to the -COOH group. The derived microgels were characterized by FTIR and elemental analyses. The derivatized microgels were responsive to pH and ionic strength of the external medium. The swelling of microgels increased when the pH of the medium changed from acidic to alkaline. Transport parameters, viz., solvent front velocity and diffusion coefficients were calculated from a measurement of the dimensional response of the microgels under variable pH conditions. The variation in pH changed the transport mechanism from Case II (in 0.1 N HCl) to non-Fickian (in pH 7.4 buffer), and these processes are relaxation-controlled. Ionic strength exerted a profound influence on the swelling of the microgels. Swelling was reversible and pulsatile with the changing environmental conditions. The pH-sensitive microgels were loaded with diltiazem hydrochloride and nifedipine (both antihypertensive drugs) and their release studies were performed in both the simulated gastric and intestinal pH conditions. The release was relatively quicker in pH 7.4 buffer than observed in 0.1 N HCl; the release followed non-Fickian transport in almost all the cases.

Polymers in drug delivery

Advances in polymer science have led to the development of several novel drug-delivery systems. A proper consideration of surface and bulk properties can aid in the designing of polymers for various drug-delivery applications. Biodegradable polymers find widespread use in drug delivery as they can be degraded to non-toxic monomers inside the body. Novel supramolecular structures based on polyethylene oxide copolymers and dendrimers are being intensively researched for delivery of genes and macromolecules. Hydrogels that can respond to a variety of physical, chemical and biological stimuli hold enormous potential for design of closed-loop drug-delivery systems. Design and synthesis of novel combinations of polymers will expand the scope of new drug-delivery systems in the future.

Drug targeting using thermally responsive polymers and local hyperthermia

We report a new thermal targeting method in which a thermally responsive drug carrier selectively accumulates in a solid tumor that is maintained above physiological temperature by externally applied, focused hyperthermia. We synthesized two thermally responsive polymers that were designed to exhibit a lower critical solution temperature (LCST) transition slightly above physiological temperature: (1) a genetically engineered elastin-like polypeptide (ELP) and (2) a copolymer of N-isopropylacrylamide (NIPAAm) and acrylamide (AAm). The delivery of systemically injected polymer-rhodamine conjugates to solid tumors was investigated by in vivo fluorescence video microscopy of ovarian tumors implanted in dorsal skin fold window chambers in nude mice, with and without local hyperthermia. When tumors were heated to 42 degrees C, the accumulation of a thermally responsive ELP with a LCST of 40 degrees C was approximately twofold greater than the concentration of the same polymer in tumors that were not heated. Similar results were also obtained for a thermally responsive poly(NIPAAM-co-AAm), though the enhanced accumulation of this carrier in heated tumors was lower than that observed for the thermally responsive ELP. These results suggest that enhanced delivery of drugs to solid tumors can be achieved by conjugation to thermally responsive polymers combined with local heating of tumors.

Effect of ionic strength on the loading efficiency of model polypeptide/protein drugs in pH-/temperature-sensitive polymers

In this report, the effect of ionic strength on the loading efficiency of three model polypeptide/protein drugs, namely angiotensin II, insulin, and cytochrome c, in pH- and temperature-sensitive terpolymers of poly(NIPAAm-co-butylmethacrylate-co-acrylic acid) (poly(NIPAAm-co-BMA-co-AA)) has been investigated. Loading efficiency of polypeptides in pH-/temperature-sensitive beads composed of poly(NIPAAm-co-BMA-co-AA) terpolymer is predominantly governed by hydrophobic interactions, both nonspecific surface interactions and/or specific interactions (binding pockets) between the protein and the polymer molecules. Thus, loading efficiency increases with ionic strength. However, as ionic strength increases further, polymer deswelling (collapse), which is also controlled by hydrophobic forces, becomes more pronounced, and consequently, a higher fraction of water is squeezed out during bead formation and the loading efficiency starts to decrease.