Sequence-specific, electronic detection of oligonucleotides in blood, soil, and foodstuffs with the reagentless, reusable E-DNA sensor

Microfluidic device architecture for electrochemical patterning and detection of multiple DNA sequences

Electrochemical biosensors pose an attractive solution for point-of-care diagnostics because they require minimal instrumentation and they are scalable and readily integrated with microelectronics. The integration of electrochemical biosensors with microscale devices has, however, proven to be challenging due to significant incompatibilities among biomolecular stability, operation conditions of electrochemical sensors, and microfabrication techniques. Toward a solution to this problem, we have demonstrated here an electrochemical array architecture that supports the following processes in situ, within a self-enclosed microfluidic device: (a) electrode cleaning and preparation, (b) electrochemical addressing, patterning, and immobilization of sensing biomolecules at selected sensor pixels, (c) sequence-specific electrochemical detection from multiple pixels, and (d) regeneration of the sensing pixels. The architecture we have developed is general, and it should be applicable to a wide range of biosensing schemes that utilize gold-thiol self-assembled monolayer chemistry. As a proof-of-principle, we demonstrate the detection and differentiation of polymerase chain reaction (PCR) amplicons diagnostic of human (H1N1) and avian (H5N1) influenza.

Label-Free Single-Nucleotide Polymorphism Detection Using a Cationic Tetrahedralfluorene and Silica Nanoparticles

We developed a simple method that is able to provide label-free sequence-specific DNA detection with single-nucleotide polymorphism (SNP) detection selectivity. This method makes use of both DNA probe immobilized silica nanoparticles and optically amplifying light harvesting molecules. The recognition is accomplished by sequence-specific hybridization between the DNA probes on the silica nanoparticles and the targets of interest. After subsequent treatment with ethidium bromide (EB), a cationic tetrahedralfluorene was added to electrostatically associate with the DNA molecules on the nanoparticle surface, leading to sensitized EB emission via fluorescence resonance energy transfer (FRET). Because of the selective response of the tetrahedralfluorene to intercalated EB, the perfectly matched DNA targets were distinctively differentiated from those with mutations. The presence of tetrahedralfluorene provides improved detection sensitivity and selectivity, as compared to the use of EB alone as a signal reporter. The demonstrated highly selective label-free detection method laid the ground work for the future development of disposable and real-time testing kits in SNP screenings.

Linear, redox modified DNA probes as electrochemical DNA sensors

We show here that hybridization-linked changes in the dynamics of a redox-modified, electrode-bound linear (as opposed to stem-loop) probe DNA produce large changes in Faradaic current, allowing for the ready detection of target oligonucleotides.

Aptamers: molecular tools for analytical applications

Aptamers are artificial nucleic acid ligands, specifically generated against certain targets, such as amino acids, drugs, proteins or other molecules. In nature they exist as a nucleic acid based genetic regulatory element called a riboswitch. For generation of artificial ligands, they are isolated from combinatorial libraries of synthetic nucleic acid by exponential enrichment, via an in vitro iterative process of adsorption, recovery and reamplification known as systematic evolution of ligands by exponential enrichment (SELEX). Thanks to their unique characteristics and chemical structure, aptamers offer themselves as ideal candidates for use in analytical devices and techniques. Recent progress in the aptamer selection and incorporation of aptamers into molecular beacon structures will ensure the application of aptamers for functional and quantitative proteomics and high-throughput screening for drug discovery, as well as in various analytical applications. The properties of aptamers as well as recent developments in improved, time-efficient methods for their selection and stabilization are outlined. The use of these powerful molecular tools for analysis and the advantages they offer over existing affinity biocomponents are discussed. Finally the evolving use of aptamers in specific analytical applications such as chromatography, ELISA-type assays, biosensors and affinity PCR as well as current avenues of research and future perspectives conclude this review.

Effect of molecular crowding on the response of an electrochemical DNA sensor

E-DNA sensors, the electrochemical equivalent of molecular beacons, appear to be a promising means of detecting oligonucleotides. E-DNA sensors are comprised of a redox-modified (here, methylene blue or ferrocene) DNA stem-loop covalently attached to an interrogating electrode. Because E-DNA signaling arises due to binding-induced changes in the conformation of the stem-loop probe, it is likely sensitive to the nature of the molecular packing on the electrode surface. Here we detail the effects of probe density, target length, and other aspects of molecular crowding on the signaling properties, specificity, and response time of a model E-DNA sensor. We find that the highest signal suppression is obtained at the highest probe densities investigated, and that greater suppression is observed with longer and bulkier targets. In contrast, sensor equilibration time slows monotonically with increasing probe density, and the specificity of hybridization is not significantly affected. In addition to providing insight into the optimization of electrochemical DNA sensors, these results suggest that E-DNA signaling arises due to hybridization-linked changes in the rate, and thus efficiency, with which the redox moiety collides with the electrode and transfers electrons.

Hairpin-DNA Probe for Enzyme-Amplified Electrochemical Detection of Legionella pneumophila

An electrochemical genosensor for the detection of nucleic acid sequences specific of Legionella pneumophila is reported. An immobilized thiolated hairpin probe is combined with a sandwich-type hybridization assay, using biotin as a tracer in the signaling probe, and streptavidin-alkaline phosphatase as reporter molecule. The activity of the immobilized enzyme was voltammetrically determined by measuring the amount of 1-naphthol generated after 2 min of enzymatic dephosphorylation of 1-naphthyl phosphate. The sensor allows discrimination between L. pneumophila and L. longbeachae with high sensitivity under identical assay conditions (no changes in stringency). A limit of detection of 340 pM L. pneumophila DNA, and a linear relationship between the analytical signal and the logarithm of the target concentration to 2 muM were obtained. Experimental results show the superior sensitivity and selectivity of the hairpin-based assay when compared with analogous sandwich-type assays using linear capture probes.

Heightened sense for sensing: recent advances in pathogen immunoassay sensing platforms

Rapid and efficient sensors are essential for effective defense against the emerging threat of bioterrorism and biological warfare. This review article describes several recent immunosensing advances that are relevant to biothreat detection. These highly diverse examples are intended to demonstrate the breadth of these immunochemical sensing systems and platforms while highlighting those technologies that are suitable for pathogen detection.

Single-step electronic detection of femtomolar DNA by target-induced strand displacement in an electrode-bound duplex

We report a signal-on, electronic DNA (E-DNA) sensor that is label-free and achieves a subpicomolar detection limit. The sensor, which is based on a target-induced strand displacement mechanism, is composed of a "capture probe" attached by its 5' terminus to a gold electrode and a 5' methylene blue-modified "signaling probe" that is complementary at both its 3' and 5' termini to the capture probe. In the absence of target, hybridization between the capture and signaling probes minimizes contact between the methylene blue and electrode surface, limiting the observed redox current. Target hybridization displaces the 5' end of the signaling probe, generating a short, flexible single-stranded DNA element and producing up to a 7-fold increase in redox current. The observed signal gain is sufficient to achieve a demonstrated (not extrapolated) detection limit of 400 fM, which is among the best reported for single-step electronic DNA detection. Moreover, because sensor fabrication is straightforward, the approach appears to provide a ready alternative to the more cumbersome femtomolar electrochemical assays described to date.