Near-Infrared-to-Ultraviolet Light-Mediated Photoelectrochemical Aptasensing Platform for Cancer Biomarker Based on Core-Shell NaYF4:Yb,Tm@TiO2 Upconversion Microrods

Ultrasensitive detection of the androgen receptor through the recognition of an androgen receptor response element and hybridization chain amplification

An ultrasensitive electrochemical detection of the androgen receptor (AR) was developed based on the protection of a DNA duplex by the AR from restriction endonuclease-mediated digestion and a subsequent hybridization chain reaction (HCR). Two partially complementary DNA probes P1 and P2 were designed to form an androgen receptor binding probe (ARBP) through hybridization. The ARBP contains a duplex at one end and two single-stranded tails at the other end. The duplex part containing the recognition sites of the AR and NspI restriction endonuclease was immobilized on an Au electrode, whereas the single-stranded parts served as capture probes to activate the HCR. In the absence of the AR, NspI can cleave the duplex and release the capture probes, and thus, no HCR occurs. However, the AR can bind to the ARBP and protect the duplex from cleavage; therefore, the capture probes can trigger the HCR between four carefully designed G-quadruplex forming hairpin probes and the capture probes, resulting in the formation of numerous G-quadruplexes. Finally, differential pulse voltammetry (DPV) was carried out to quantify the AR. The assay revealed a detection limit of 7.64 fM. The verification of its high specificity and practicability in serum samples indicated its potential applications in the fields of clinical examination and disease diagnosis.

Enhanced upconversion luminescence intensity of core-shell NaYF4 nanocrystals guided by morphological control

How to further increase the upconversion luminescence (UCL) efficiency of core-shell upconversion nanoparticles (UCNPs) is highly desirable for their photoelectric and bio-logical applications. Herein, a novel but facile strategy is proposed to substantially enhance the UCL intensity of NaYF₄ based core-shell UCNPs by morphological control. The morphologies of core-shell UCNPs can be optimized from rod-like to spherical like by changing the ratio of oleic acid (OA) to 1-octadecene (ODE) during the shell growth process with other reaction conditions constant. The mechanism of shape control is further investigated based on the competitive absorption between OA molecules and lanthanide ions (Y³⁺, Yb³⁺, Er³⁺ or Tm³⁺) onto the different crystal axes (a, b and c) to guide their shell growth speed. The absolute quantum yields were up to 2.7% and 1.8% for spherical and rod like core-shell UCNPs under excitation of 980 nm laser (power density of 1.6 W cm^-2), respectively. Moreover, the UCL intensity and effective lifetime (τ _eff ) of Er³⁺ emission at 541 nm of spherical like core-shell UCNPs increased by 11.7 and 1.82 folds than rod like core-shell UCNPs. Therefore, our designed novel strategy can greatly improve the UCL efficiency of core-shell UCNPs and promote their development in diverse applications.

A label-free and double recognition-amplification novel strategy for sensitive and accurate carcinoembryonic antigen assay

Herein, a label-free and double recognition-amplification (LDRA) strategy for carcinoembryonic antigen (CEA) detection was developed, based on a new designed dual-function messenger probe (DMP) coalescing with DNA tetrahedron probes (DTPs) and hybridization chain reaction (HCR). The DMP possess dual-function to replace CEA for specific interface hybridization and initiate hybridization chain reaction. The interfacial hybridization event was quantitatively converted to an electrochemical signal by using hemin/G-quadruplex (h-Gx) formed after the hybridization chain reaction. Self-assembled DNA tetrahedron probes, which were readily decorated on an electrode surface as a scaffold with rigid support and ordered orientation, enabled the highly efficient strands hybridization and greatly increased target accessibility as well as significantly decreased noise. The proposed assay integrated dual recognition processes and HCR signal amplification processes, achieving the identification of low concentration of CEA as detection limit of 18.2 fg mL^-1 (S/N = 3) and wider linearity range of 0.0001 ng mL^-1-50 ng mL^-1. A new electrochemical sensing method was proposed for CEA detection and used in real clinical samples. The obtained results were good consistency with those of clinical diagnosis.

An ultrasensitive aptasensor based on self-enhanced Au nanoclusters as highly efficient electrochemiluminescence indicator and multi-site landing DNA walker as signal amplification

Gold nanoclusters (Au NCs) have been shown to be prospective nanoscale electrochemiluminescence (ECL) materials that are being extensively explored in bioanalysis. However, the low ECL efficiency of Au NCs has been a bottleneck barrier for their better bioapplications. To overcome this disadvantage, a low oxidation potential co-reactant N,N-diisopropylethylenediamine (DPEA) was first used to prepare self-enhanced Au NCs (Au-DPEA NCs) for drastically enhancing the ECL efficiency of Au NCs in this study. In addition, an efficient multi-site landing DNA walker with multidirectional motion track and rapid payloads release compared to directional DNA walker was constructed for converting target mucin 1 (MUC1) to intermediate DNA and achieving significant signal amplification. On the basis of the Au-DPEA NCs as efficient ECL signal labels and multi-site landing DNA walker as signal amplification strategy, an ECL aptasensor was established for the ultrasensitive detection of MUC1 in the range from 1 fg mL^-1 to 1 ng mL^-1 with a limit of detection down to 0.54 fg mL^-1. The results demonstrated that the present study opened a new research direction for the development of high-efficiency Au NCs indicator as well as ultrasensitive ECL sensing platform for applications in clinical and bioanalysis.

Highly sensitive and specific electrochemical biosensor for microRNA-21 detection by coupling catalytic hairpin assembly with rolling circle amplification

BACKGROUND

MicroRNA plays a significant role in gene regulation and is usually regarded as an important biological marker. Electrochemical biosensors are excellent tools for microRNA detection.

METHODS

In this experiment, we take miRNA-21 as a target, combining catalytic hairpin assembly (CHA) and rolling circle amplification (RCA) as a dual signal amplification strategy for the detection of microRNA in an electrochemical biosensor.

RESULTS

This strategy has a good linear range of 0.5-12 500 pmol of microRNA. The limit of detection (LOD) for miRNA is as low as 290 fmol, showing excellent performance. Finally, this method has been successfully applied to the detection of miRNA-21 from HeLa cells.

CONCLUSION

This method can be applied not only for microRNA detection with high sensitivity and speed, but can also detect small molecules and proteins combined with aptamers.

Colorimetric and electrochemical (dual) thrombin assay based on the use of a platinum nanoparticle modified metal-organic framework (type Fe-MIL-88) acting as a peroxidase mimic

An electrochemical and colorimetric dual-readout method is described for the determination of thrombin. A platinum nanoparticle (Pt NP) modified metal organic framework (MOF) acts as a peroxidase (POx) mimic that causes the formation of a blue product from 3,3',5,5'-tetramethylbenzidine (TMB) and hydrogen peroxide, with an absorption maximum at 650 nm. In addition, gold nanoparticles enrich initiators that trigger the hybridization chain reaction for dual signal amplification to generate an electrochemical current typically measured at 0.31 V (from -0.5 to -0.1 V) and allow quantitation of thrombin with high sensitivity and over a wide detection range. The colorimetric and electrochemical (dual) thrombin assay produces two kinds of signals which warrants accuracy, diversity, and an option for visual inspection. The dual-channel sensor allows for the quantitative determination of thrombin with a low detection limit (0.33 fM) for the electrochemical method and 0.17 pM for the colorimetric method) and over a wide detection range (1 fM to 10 nM for electrochemical method and 0.5 pM to 1 nM for colorimetric method). The electrochemical detection limit is lower than that of colorimetry, and the linear range is wider, which is more suitable for further quantitative analysis of the target. Graphical abstract Schematic representation of a colorimetric and electrochemical (dual) thrombin assay based on the use of a platinum nanoparticle modified metal-organic framework for color development and hybridization chain reaction for electrochemical signal. C-TBA: complementary sequences of thrombin aptamer, TBA: thrombin aptamer, I-Au NPs: initiators enriched by gold nanoparticles, S-AuE: sensing gold electrode, RS-AuE: reacted sensing gold electrode, TB: thrombin, MB: Methylene Blue, HCR: hybridization chain reaction.

A sensitive photoelectrochemical assay of miRNA-155 based on a CdSe QDs//NPC-ZnO polyhedra photocurrent-direction switching system and target-triggered strand displacement amplification strategy

A new photoelectrochemical biosensor based on a CdSe QD//NPC-ZnO polyhedra photocurrent-direction switching system and a target-triggered strand displacement amplification strategy was developed for the detection of miRNA-155.

Conductometric immunoassay of alpha-fetoprotein in sera of liver cancer patients using bienzyme-functionalized nanometer-sized silica beads

A conductometric immunoassay protocol was designed for the sensitive detection of a liver cancer biomarker, alpha-fetoprotein (AFP), in biological fluids by using enzyme-conjugated nanometer-sized enzyme-doped silica beads.

Up-conversion luminescence lifetime thermometry based on the 1G4 state of Tm3+ modulated by cross relaxation processes

The first study on the up-conversion luminescence lifetime thermometry based on the ¹G₄ state of Tm³⁺ modulated by cross relaxation processes.

Dual-Channel Photoelectrochemical Ratiometric Aptasensor with up-Converting Nanocrystals Using Spatial-Resolved Technique on Homemade 3D Printed Device

A near-infrared light-activated ratiometric photoelectrochemical aptasensor was fabricated for detection of carcinoembryonic antigen (CEA) coupling with upconversion nanoparticles (UCNPs)-semiconductor nanocrystals-based spatial-resolved technique on a homemade 3D printing device in which a self-regulating integrated electrode was designed for dual signal readout. The as-prepared NaYF₄:Yb,Er UCNPs@CdTe nanocrystals were initially assembled on two adjacent photoelectrodes, then CEA aptamer 1 (A₁) and capture DNA (CA) were modified onto two working photoelectrodes (WP₁ and WP₂) through covalent binding, respectively, and then gold nanoparticle-labeled CEA aptamer 2 (Au NP-A₂) was immobilized on the surface of functional WP₂ for the formation of double-stranded DNA. Upon target CEA introduction, the various concentrations of CEA were captured on the WP₁, whereas the binding of the CEA with Au NP-A₂ could be released from the WP₂ thanks to the highly affinity of CEA toward A₂. The dual signal readout with the "signal-off" of WP₁ and "signal-on" of WP₂ were employed for the spatial-resolved PEC (SR-PEC) strategy to detect CEA as an analytical model. Combining NaYF₄:Yb,Er UCNPs@CdTe nanocrystals with spatial-resolved model on 3D printing device, the PEC ratiometric aptasensor based on steric hindrance effect and exciton-plasmon interactions (EPI) exhibited a linear range from 10.0 pg mL^-1 to 5.0 ng mL^-1 with a limit of detection of 4.8 pg mL^-1 under 980 nm illumination. The SR-PEC ratiometric strategy showed acceptable stability and reproducibility with a superior anti-interference ability. This approach can provide the guidance for the design of ratiometric, multiplexed, and point-of-care biosensors.

DNA flower-encapsulated horseradish peroxidase with enhanced biocatalytic activity synthesized by an isothermal one-pot method based on rolling circle amplification

DNA nanotechnology has been developed to construct a variety of functional two- and three-dimensional structures for versatile applications. Rolling circle amplification (RCA) has become prominent in the assembly of DNA-inorganic composites with hierarchical structures and attractive properties. Here, we demonstrate a one-pot method to directly encapsulate horseradish peroxidase (HRP) in DNA flowers (DFs) during RCA. The growing DNA strands and Mg₂PPi crystals lead to the construction of porous DFs, which provide sufficient interaction sites for spontaneously incorporating HRP molecules into DFs with high loading capacity and good stability. Furthermore, in comparison with free HRP, the DNA flower-encapsulated HRP (termed HRP-DFs) demonstrate enhanced enzymatic activity, which can efficiently biocatalyze the H₂O₂-mediated etching of gold nanorods (AuNRs) to generate distinct color changes since the longitudinal localized surface plasmon resonance (LSPR) frequency of AuNRs is highly sensitive to the changes in the AuNR aspect ratio. Through rationally incorporating the complementary thrombin aptamer sequence into the circular template, the synthesized HRP-DF composites are readily used as amplified labels for visual and colorimetric detection of thrombin with ultrahigh sensitivity and excellent selectivity. Therefore, our proposed strategy for direct encapsulation of enzyme molecules into DNA structures shows considerable potential applications in biosensing, biocatalysis, and point-of-care diagnostics.

A novel electrochemical immunoassay for carcinoembryonic antigen based on glucose oxidase-encapsulated nanogold hollow spheres with a pH meter readout

A portable electrochemical immunosensing protocol was designed for the sensitive detection of a disease-related tumor biomarker (carcinoembryonic antigen, CEA, used in this case) on a pH meter using glucose oxidase (GOx)-encapsulated gold hollow microspheres (AuHMs) for signal amplification. The assay was carried out on a monoclonal anti-CEA capture antibody-coated microplate with a sandwich-type reaction mode. The GOx-entrapped AuHM was first synthesized using the reverse micelle method and then used as the signal-generation tag for the labeling of polyclonal anti-CEA detection antibody. Accompanying the formation of the sandwiched immunocomplexes, the loaded GOx molecules in the microsphere could catalyze glucose into gluconic acid and hydrogen peroxide. The as-produced gluconic acid changed the microenvironment of the detection solution, thus resulting in the shift of the pH value, which could be quantitatively determined on a portable pH meter. The use of gold hollow microspheres was expected to enhance the loaded amount of GOx for signal amplification. Two labeling protocols including GOx-labeled secondary antibody and GOx-AuHM-labeled secondary antibody were investigated for CEA detection, and improved analytical features were acquired with GOx-AuHM labeling. With the GOx-AuHM labeling strategy, the pH meter-based immunosensing device exhibited a good analytical performance for CEA detection within the dynamic linear range of 0.1-100 ng mL-1 at a detection limit of 0.062 ng mL-1. The strong attachment of anti-CEA antibodies to GOx-AuHM brought a good repeatability and intermediate precision down to 10%. Importantly, no significant differences at the 0.05 significance level were encountered in the analysis of 12 human serum specimens between the developed immunoassay and the commercialized electrochemiluminescent method for CEA determination.

A colorimetric aptasensor for the antibiotics oxytetracycline and kanamycin based on the use of magnetic beads and gold nanoparticles

An aptamer based assay is presented for the determination of the antibiotics oxytetracycline (OTC) and kanamycin (KAN). Magnetic beads were applied for separation, and gold nanoparticles (AuNPs) for signal amplification. DNA aptamers against OTC and KAN were firstly designed. After specific recognition events, the aptamer sequences were released from the surface of magnetic beads and the remaining DNA probes captured horseradish peroxidase (HRP) modified AuNPs. Subsequently, 3,3',5,5'-tetramethylbenzidine and o-phenylenediamine are catalytically oxidized by HRP, and the generated colorimetric responses can reflect the concentrations of OTC (at 370 nm) and KAN (at 450 nm), respectively. Experimental results demonstrate that the method is highly sensitive with the detection limit as low as 1 ag mL^-1 for OTC and KAN. An extremely wide linear range (over 11 orders of magnitude) is achieved. The high selectivity is attributed to the high affinity between aptamer and the substrate. The results of real sample tests also verify that the method is promising for antibiotics analysis in the applications of food monitoring and clinical diagnosis. Graphical abstract Schematic presentation of a colorimetric assay for antibiotics based on aptamer-modified magnetic beads and horseradish peroxidase modified gold nanoparticles. Colorimetric responses result from the enzymatic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and o-phenylenediamine (OPD), respectively.

Core-shell structured titanium dioxide nanomaterials for solar energy utilization

Because of its unmatched resource potential, solar energy utilization currently is one of the hottest research areas. Much effort has been devoted to developing advanced materials for converting solar energy into electricity, solar fuels, active chemicals, or heat. Among them, TiO2 nanomaterials have attracted much attention due to their unique properties such as low cost, nontoxicity, good stability and excellent optical and electrical properties. Great progress has been made, but research opportunities are still present for creating new nanostructured TiO2 materials. Core-shell structured nanomaterials are of great interest as they provide a platform to integrate multiple components into a functional system, showing improved or new physical and chemical properties, which are unavailable from the isolated components. Consequently, significant effort is underway to design, fabricate and evaluate core-shell structured TiO2 nanomaterials for solar energy utilization to overcome the remaining challenges, for example, insufficient light absorption and low quantum efficiency. This review strives to provide a comprehensive overview of major advances in the synthesis of core-shell structured TiO2 nanomaterials for solar energy utilization. This review starts from the general protocols to construct core-shell structured TiO2 nanomaterials, and then discusses their applications in photocatalysis, water splitting, photocatalytic CO2 reduction, solar cells and photothermal conversion. Finally, we conclude with an outlook section to offer some insights on the future directions and prospects of core-shell structured TiO2 nanomaterials and solar energy conversion.

An impedance biosensor for simultaneous detection of low concentration of Salmonella serogroups in poultry and fresh produce samples

This paper reports the design, fabrication and testing of a microfluidic based impedance biosensor for rapid and simultaneous detection of three Salmonella serogroups. The microfluidic device consists of three microchannels, each one includes a region for focusing the Salmonella cells into the centerline of the microchannel and direct them toward the sensing region to obtain highly concentrated samples using positive dielectrophoresis force. A region for bacteria sensing consists of interdigitated electrode (IDE) array with 10 pairs of fingers. Three types of Salmonella antibodies (type B, D and E) were mixed separately with the cross-linker (Sulfo-LC-SPDP) to enhance the immobalization of the antibodies to the detection electrodes. The electrode surfaces was then functionalized with the three mixtures, one for each channel. As target antigen binds to the antibody, it results in impedance change. The Salmonella samples were spiked with Salmonella type B, introduced into the biosensor via the sample inlet into the focusing region, and then toward the sensing region where they bind to the immobilized antibody, causing a change in the impedance. The performance of the devices was tested using single Salmonella serotype B and two Salmonella serotypes B, and D, with a limit of detection of 7 cells/ml. The biosensor was also able to differentiate live from dead bacteria eliminating the false positive results. Finally, the device was also able to detect Salmonella selectively when other type of pathogen was present.

Blocking-Free ELISA Using a Gold Nanoparticle Layer Coated Commercial Microwell Plate

Enzyme-linked immunosorbent assays (ELISA) show extensive application in immunoassays, to detect and monitor protein biomarkers in clinical diagnosis. Nevertheless, the time required and its multiple steps limit its application. We take advantage of a polyethyleneimine (PEI) gold nanoparticle (GNP) coated microwell plate to perform blocking-free ELISA, in which no nonspecific protein adsorption appears on the GNP layer. If the PEI-GNP coated microwell plate and immobilization of captured antibodies on the plate are prepared in advance, such as using an ELISA kit, the whole ELISA process can be finished in less than 2 h. Meanwhile, we have ensured that the GNP layer can preserve the precision and good linearity of ELISA without causing negative effects on the plate.

Red light-driven photoelectrochemical biosensing for ultrasensitive and scatheless assay of tumor cells based on hypotoxic AgInS2 nanoparticles

A novel red light-driven photoelectrochemical (PEC) biosensing platform based on hypotoxic ternary mercaptopropionic acid (MPA)-capped AgInS₂ nanoparticles (NPs) with excellent hydrophily and biocompatibility was proposed. AgInS₂ NPs as a PEC sensing substrate exhibited high photon-to-current conversion efficiency under red light excitation, generating an intensive photocurrent for enhancing the sensitivity of PEC determination. After the introduction of the amino-terminated sgc8c aptamer onto the interface of AgInS₂ NPs, the overexpressed protein tyrosine kinase-7 on the surface of lymphoblast CCRF-CEM cells could be efficiently captured. Using CCRF-CEM cell as a model analyte, an ultrasensitive PEC biosensor for scatheless assay of cells at the applied potential of 0.15 V under a red light excitation of 630 nm was designed based on the significant decline of photocurrent intensity after capturing CCRF-CEM cells. The developed PEC cytosensor demonstrated an excellent cell-capture ability, as well as a wide linear range from 1.5 × 10² to 3.0 × 10⁵ cells/mL and a low detection limit of 16 cells/mL for CCRF-CEM cells. In addition, the resulting assay method verified high selectivity and negligible cytotoxicity for cells assay. This work provided an alternative method for scatheless assay of tumor cells, which would have promising prospect in clinical diagnoses of cancer.

In Situ Immobilized Sesamol-Quinone/Carbon Nanoblack-Based Electrochemical Redox Platform for Efficient Bioelectrocatalytic and Immunosensor Applications

Most of the common redox mediators such as organic dyes and cyanide ligand-associated metal complex systems that have been used for various electrochemical applications are hazardous nature. Sesamol, a vital nutrient that exists in natural products like sesame seeds and oil, shows several therapeutic benefits including anticancer, antidiabetic, cardiovascular protective properties, etc. Herein, we introduce a new electrochemical redox platform based on a sesamol derivative, sesamol-quinone (Ses-Qn; oxidized sesamol), prepared by the in situ electrochemical oxidation method on a carbon nanoblack chemically modified glassy carbon electrode surface (GCE/CB@Ses-Qn) in pH 7 phosphate buffer solution, for nontoxic and sustainable electrochemical, electroanalytical, and bioelectroanalytical applications. The new Ses-Qn-modified electrode showed a well-defined redox peak at E ^o = 0.1 V vs Ag/AgCl without any surface-fouling behavior. Following three representative applications were demonstrated with this new redox system: (i) simple and quick estimation of sesamol content in the natural herbal products by electrochemical oxidation on GCE/CB followed by analyzing the oxidation current signal. (ii) Utilization of the GCE/CB@Ses-Qn as a transducer, bioelectrocatalytic reduction, and sensing of H₂O₂ after absorbing the horseradish peroxidase (HRP)-based enzymatic system on the underlying surface. The biosensor showed a highly selective H₂O₂ signal with current sensitivity and detection limit values 0.1303 μA μM^-1 and 990 nM, respectively, with tolerable interference from the common biochemicals like dissolved oxygen, cysteine, ascorbic acid, glucose, xanthine, hypoxanthine, uric acid, and hydrazine. (iii) Electrochemical immunosensing of white spot syndrome virus by sequentially modifying primary antibody, antigen, secondary antibody (HRP-linked), and bovine serum albumin on the redox electrode, followed by selective bioelectrochemical detection of H₂O₂.

Perovskite-type BiFeO3/ultrathin graphite-like carbon nitride nanosheets p-n heterojunction: Boosted visible-light-driven photoelectrochemical activity for fabricating ampicillin aptasensor

Developing effective sensing method for trace analysis of ampicillin (AMP) is urgent and significant due to its residue possess serious threats to human health. Herein, a p-n heterojunction, on the basis of p-type BiFeO₃ nanoparticles coupled n-typed ultrathin graphite-like carbon nitride (utg-C₃N₄) nanosheets, has been designed and synthesized via a simple electrostatic interaction strategy. Such p-n heterojunction has two advantages: one is capable to narrow the band gap of photoactive materials from 2.20 eV of BiFeO₃ down to 2.04 eV of BiFeO₃/utg-C₃N₄, leading to improve the efficiency of visible light utilization; and the other is to facilitate the charge separation rate, resulting in the boosted photoelectrochemical (PEC) performance of BiFeO₃/utg-C₃N₄. Under visible light illumination, the photocurrent of the resulted BiFeO₃/utg-C₃N₄ was 7.0-fold enhanced than that of pure BiFeO₃ nanoparticles, and indeed 2.3-fold enhanced comparing to BiFeO₃/bulk-C₃N₄. Based on excellent PEC properties of BiFeO₃/utg-C₃N₄, an on-off-on PEC aptasensor was successfully fabricated for ampicillin (AMP) determination with highly selectivity and sensitivity. The fabricated PEC aptasensor exhibited excellent PEC performance with a broad linear in the range from 1 × 10^-12 mol L^-1 to 1 × 10^-6 mol L^-1 as well as a low detection limit of 3.3 × 10^-13 mol L^-1 (S/N = 3), and also good feasibility in real sample. The excellent analytical performance indicated that PEC aptasensor on the basis of the visible light driven BiFeO₃/utg-C₃N₄ heterojunction can provide a promising biosensor platform for sensitive detection AMP in food and environment analysis.

Structure-Switching Electrochemical Aptasensor for Single-Step and Specific Detection of Trace Mercury in Dairy Products

A reagentless and single-step electrochemical aptasensor with separation-free fashion and rapid response is developed for the Hg²⁺ assay in dairy products. Herein, the sensing strategy is established on Hg²⁺-induced structural transition of the methylene-blue-tagged single-stranded DNA (ssDNA) from a flexible manner to rigid hairpin-shaped double-stranded DNA (dsDNA), generating an improved peak current for the Hg²⁺ assay with a detection limit of 0.62 fM. Importantly, the best signal-to-noise ratio value can be obtained by exploiting Au flowers as sensing material and the optimal ssDNA concentration. The proposed sensor also exhibits high selectivity as a result of the specific thymine-Hg²⁺-thymine (T-Hg²⁺-T) coordination chemistry and can be applied to detect Hg²⁺ in dairy products. With the use of the electric "signal-on" switch, the electrochemical aptasensor has the advantages of simplicity, ease of operation, and high sensitivity and specificity, offering a promising method to assess the safety of dairy products polluted with Hg²⁺.

Microwave-Assisted Facile Synthesis of Eu(OH)3 Nanoclusters with Pro-Proliferative Activity Mediated by miR-199a-3p

As a pharmaceutical excipient, dextran serves as an efficient ligand for stabilizing some clinically available inorganic nanomaterials such as iron oxide nanocrystals. Herein, dextran-capped nanosized europium(III) hydroxides [Eu(OH)₃] nanoclusters (NCs) composed of 5 nm Eu(OH)₃ nanoparticles have been large-scale synthesized via a microwave-accelerated hydrothermal reaction. The as-synthesized Eu(OH)₃ NCs exhibited excellent physiological stability and biocompatibility both in vitro and in vivo and possessed considerable pro-proliferative activities in human umbilical vein endothelial cells (HUVECs). To investigate the epigenetic modulation of Eu(OH)₃ NCs-elicited proliferation, the newly developed high-throughput next generation sequencing technology was employed herein. As a result, we have screened 371 dysregulated miRNAs in Eu(OH)₃ NCs-treated HUVECs and obtained 26 potentially functional miRNAs in promoting cell proliferation. Furthermore, upregulated miR-199a-3p was predicted, validated, and eventually confirmed to be a crucial modulator in the pro-proliferative activity of Eu(OH)₃ NCs by targeting zinc fingers and homeoboxes protein 1 (ZHX1). Importantly, these findings provide potential therapeutic strategy for ischemic heart/limb diseases and tissue regeneration by combination of nanomedicine and gene therapy with Eu(OH)₃ NCs and miR-199a-3p-ZHX1 axis modulation.

Enhancing the Photoelectrochemical Response of DNA Biosensors Using Wrinkled Interfaces

Photoelectrochemical (PEC) biosensors, with optical biasing and electrochemical readout, are expected to enhance the limit-of-detection of electrochemical biosensors by lowering their background signals. However, when PEC transducers are functionalized with biorecognition layers, their current significantly decreases, which reduces their signal-to-noise ratio and dynamic range. Here, we develop and investigate a wrinkled conductive scaffold for loading photoactive quantum dots into an electrode. The wrinkled photoelectrodes demonstrate an order of magnitude enhancement in the magnitude of the transduced PEC current compared to their planar counterparts. We engineer PEC biosensors by functionalizing the wrinkled photoelectrodes with nucleic acid capture probes. We challenge the sensitivity of the wrinkled and planar biosensors with various concentrations of DNA target and observe a 200 times enhancement in the limit-of-detection for wrinkled versus planar electrodes. In addition to enhanced sensitivity, the wrinkled PEC biosensors are capable of distinguishing between fully complementary and targets with a single base-pair mismatch, demonstrating the suitability of these biosensors for use in clinical diagnostics.

Graphene oxide wrapped with gold nanorods as a tag in a SERS based immunoassay for the hepatitis B surface antigen

A composite consisting of graphene oxide and gold nanorods (GO-GNRs) was designed for the trace determination of hepatitis B surface antigen (HBsAg) using surface enhanced Raman spectroscopy (SERS). GO contains numerous carboxy and hydroxy groups on its surface and therefore can serve as the substrate for decoration with GNRs and for immobilizing antibody against HBsAg. The GNRs (carrying the SERS probe 2-mercaptopyridine) exhibit high SERS activity, and this improves the sensitivity of the biosensor. The antibody on the GO-GNRs binds HBsAg with high specificity, and it results in excellent selectivity. The SERS signal (measured at 1002 cm^-1) increases in the 1-1000 pg·mL^-1 HBsAg concentrations range, and the limit of detection is 0.05 pg·mL^-1 (at an S/N ratio of 3). The immunoassay achieves the sensitive and selective determination of HBsAg in serum and expands the potential application of GO-GNR based SERS tag in clinical research. Graphical abstract A novel graphene oxide-gold nanorod (GO-GNRs) based surface-enhanced Raman scattering (SERS) tag for immunoassay was designed. It allows for sensitive and selective determination of HBsAg in serum. The method is expected to expand the potential application in the environment, in medicine and in food analysis.

Upconversion nanocrystal 'armoured' silica fibres with superior photoluminescence for miRNA detection

We have fabricated a flexible membrane, consisting of SiO2 nanofibres armoured with upconversion nanoparticles, exhibiting intense photoluminescence. These assemblies were subsequently grafted with molecular beacons to produce a biosensor suitable for the detection of specific microRNA and with applications in early cancer detection and point-of-care diagnosis.

"On-Off-On" Photoelectrochemical/Visual Lab-on-Paper Sensing via Signal Amplification of CdS Quantum Dots@Leaf-Shape ZnO and Quenching of Au-Modified Prism-Anchored Octahedral CeO2 Nanoparticles

An effective "on-off-on" photoelectrochemical (PEC)/visual sensing system based on cleaning-switchable lab-on-paper device was designed to achieve ultrasensitive detection of analytes. The first amplified "signal-on" PEC state was gained by CdS quantum dots sensitized leaf-shape ZnO (CdS QDs/leaf-shape ZnO) structure, which was assembled on reduced graphene oxide (rGO) modified paper electrode. Then Au-modified prism-anchored octahedral CeO₂ nanoparticles (Au@PO-CeO₂ NPs), as an efficient signal quencher, were immobilized on the CdS QDs/leaf-shape ZnO with the assistance of DNA hybridization, resulting in a noticeable photocurrent response decrement with the "signal-off" PEC state. With the addition of analytes, the quencher Au@PO-CeO₂ NPs were immediately released from the sensing surface and robust PEC response was recovered to the signal-on state again. Meanwhile, the disengaged quencher in electrolyte solution flowed to the colorimetric detection area of lab-on-paper device and catalyzed oxidation of the chromogenic substrate 3,3',5,5'-tetramethylbenzidine in the presence of H₂O₂ to form the colored product, making the analytes detection more convincing with the visual discrimination. Under optimal conditions, the proposed PEC/visual lab-on-paper device possessed the detection limits toward adenosine and potassium ion as low as 0.15 and 0.06 nM, respectively. With ingenious design of actuating conversion process between hydrophilicity and hydrophobicity by slipping paper tab to solve cleaning issue in the assay procedures, the cleaning-switchable lab-on-paper device was constructed for high-performance biosensing applications. It provides an unambiguous simplicity and portable operation for exploring high reliability and sensitivity of novel point-of-care diagnostic tool with dual-signal readout.

An efficient nonlinear hybridization chain reaction-based sensitive fluorescent assay for in situ estimation of calcium channel protein expression on bone marrow cells

A sensitive and highly efficient approach to monitor the expression of proteins on live cells was urgently needed to demonstrate its factor and mechanism and most important for clinical diagnostics and molecular biology. Herein, we developed a simple and highly efficient strategy, nonlinear hybridization chain reaction (nonlinear HCR), for the sensitive determination of proteins on live cells with transient receptor potential vanilloid 4 (TRPV4) and RAW264.7 cells as a model. Unlike the normal hybridization chain reaction (HCR) with multiplicative amplification, an exponential amplified fluorescent response could be obtained in theory based on the proposed nonlinear HCR. As a result, the nonlinear HCR generated a significant enhancement about 3 times compared with the normal HCR and 10 times compared with the directly immunofluorescence assay. Based on the proposed nonlinear HCR, the fluorescent signals increased with the concentration of TRPV4 in the range from 10 pg/mL to 100 ng/mL with a detection limit of 2.8 pg/mL, which would be useful for the sensitive detection of proteins in cell lysis or on cell surface. At the same time, the significant improvements via nonlinear HCR were achieved in the fluorescent imaging system compared with traditional immunofluorescence staining and normal HCR, proving the significant value of nonlinear HCR-based amplification strategy. Success in the establishment of the highly efficient nonlinear HCR strategy offered a simple and sensitive approach to demonstrate the concentration of special proteins on cell and other proteins and nucleotide potentially, revealing a simple and efficient technology for research fields of clinical diagnostics and molecular biology.