Electrode Degradation in Lithium-Ion Batteries

Using In-Situ Laboratory and Synchrotron-Based X-ray Diffraction for Lithium-Ion Batteries Characterization: A Review on Recent Developments

Renewable technologies, and in particular the electric vehicle revolution, have generated tremendous pressure for the improvement of lithium ion battery performance. To meet the increasingly high market demand, challenges include improving the energy density, extending cycle life and enhancing safety. In order to address these issues, a deep understanding of both the physical and chemical changes of battery materials under working conditions is crucial for linking degradation processes to their origins in material properties and their electrochemical signatures. In situ and operando synchrotron-based X-ray techniques provide powerful tools for battery materials research, allowing a deep understanding of structural evolution, redox processes and transport properties during cycling. In this review, in situ synchrotron-based X-ray diffraction methods are discussed in detail with an emphasis on recent advancements in improving the spatial and temporal resolution. The experimental approaches reviewed here include cell designs and materials, as well as beamline experimental setup details. Finally, future challenges and opportunities for battery technologies are discussed.

Diffusion-Controlled Porous Crystalline Silicon Lithium Metal Batteries

Nanostructured porous silicon materials have recently advanced as hosts for Li-metal plating. However, limitations involve detrimental silicon self-pulverization, Li-dendrites, and the ability to achieve wafer-level integration of non-composite, pure silicon anodes. compo. Herein, full cells featuring low-resistance, wafer-scale porous crystalline silicon (PCS) anodes are embedded with a nanoporous Li-plating and diffusion-regulating surface layer upon combined wafer surface cleaning (SC) and anodization. LL Lithiophilic surface formation is illustrated via correlation of surface groups and X-ray structure. Low-cost SC-PCS anodes require no composite formulation, and pre-lithiation enables sustainable Li-metal plating/stripping on the lithiophilic surface and in SC-PCS bulk nanostructure. Anodization time and C-rate determined competitive full cell performance: NMC811 | 4800 s SC-PCS: 195 mAh/g (99.9% coulombic efficiency [C.E.], C/3, 50 cycles), 165 mAh/g, 587 Wh/kg (97.1% C.E., C/3 and C/2 rate, 350 cycles), 24 Ω∗cm² SC-PCS-resistivity (900 cycles); 160 μm LCO | 500 s SC-PCS: 102 mAh/g (94.1% C.E., 1C, 350 cycles).

•

Porous crystalline silicon (PCS) anodes were seamlessly integrated in silicon wafers

•

A diffusion-controlling lithiophilic anode surface was created during fabrication

•

Full cells delivered energy dense performance: 169mAh/g, 587 Wh/kg for 300 cycles

•

Non-hazardous, pure silicon Li-metal-host anodes at industry-pace throughput

Solution-Processed All-V2 O5 Battery

Exploring new battery technologies will promote the advance of energy storage systems. Designing a symmetrical-structured rechargeable battery with the same electrode materials is a meaningful exploration for battery technology. Here, a solution-processed all-V₂ O₅ rechargeable battery with V₂ O₅ as both anode and cathode is presented, in which the anionic/cationic redox reactions are decoupled by precisely clamping its working potential windows. The battery shows good electrochemical performance with high capacity of 151 mAh g^-1 at 0.10 C, good rate performance with 70% capacity retention when the current increases from 0.10 to 5 C, and promising cycling stability over 83% capacity retention after 900 cycles at 1 C. Moreover, the battery is highly profitable for simplified fabrication and scalable production, which benefits from its symmetrical configuration as well as the solution-processed strategy. This work offers a new paradigm to construct advanced symmetrical energy storage devices.

Facile Green Synthesis of Pseudocapacitance-Contributed Ultrahigh Capacity Fe2(MoO4)3 as an Anode for Lithium-Ion Batteries

The investigation into the use of earth-abundant elements as electrode materials for lithium-ion batteries (LIBs) is becoming more urgent because of the high demand for electric vehicles and portable devices. Herein, a new green synthesis strategy, based on a facile solid-state reaction with the assistance of water droplets' vapor, was conducted to prepare Fe₂(MoO₄)₃ nanosheets as anode materials for LIBs. The obtained sample possesses a two-dimensional stacked nanosheet construction with open gaps providing a much higher surface area compared to the bulk sample conventionally synthesized. The nanosheet sample delivers an ultrahigh reversible capacity (1983.6 mA h g^-1) at a current density of 100 mA g^-1 after 400 cycles, which could be related to the contribution of pseudocapacitance. The enhancement in cyclability and rated performance with an interesting increased capacity could be caused by the effect of electrochemical milling and the in situ formation of metallic particles in its lithium-ion storage mechanism.

A review on energy chemistry of fast-charging anodes

Fundamentals, challenges, and solutions towards fast-charging graphite anodes are summarized in this review, with insights into the future research and development to enable batteries suitable for fast-charging application.