Functionalization of acetylene-terminated monolayers on Si(100) surfaces: a click chemistry approach

Comparing the reactivity of alkynes and alkenes on silicon (100) surfaces

The relative reactivities of alkynes to alkenes on hydrogen-terminated silicon (100) surfaces, under conditions where a monolayer will be produced via hydrosilylation, were measured using two different approaches. The first approach was to form monolayers from a series of solutions containing different mole fractions of an alkyne, with a trifluorothioacetate distal moiety and an alkene with a terminal carboxylic acid functional. X-ray photoelectron spectroscopic analysis of the resultant surfaces showed that the mole fraction of alkyne on the surface was larger than that in the respective alkyne/alkene mixture. By fitting the XPS data, we estimated that the reactivity ratio of alkyne to alkene was approximately 1.7 +/- 0.2 when monolayers were formed at 120 degrees C. The second approach was using a molecule containing both an alkyne at one end and an alkene at the other, non-1-yne-8-ene, as the hydrosilylation reagent such that either end could attach to the silicon surface. The relative orientation of this molecule, once reacted with a hydrogen-terminated Si(100) surface, was determined by coupling an additional reagent to the distal end of the monolayer. The reagent used was azidoferrocene, which could attach onto free alkyne moieties on the surface only via the 1,3-Huisgen cycloaddition "click" reaction. Electrochemical analysis was then used to determine how many ferrocene moieties were attached to the SAM surface. In this way, it was shown that the alkyne end reacted preferentially with the silicon surface compared with the alkene end. The reactivity ratio of the alkyne end to the alkene end was increased from 2.0 +/- 0.2 to 9 +/- 1 when the temperature was decreased from 120 to 65 degrees C.

Remarkable high-yielding chemical modification of gold nanoparticles using uncatalyzed click-type 1,3-dipolar cycloaddition chemistry and hyperbaric conditions

Azide-terminated alkyl thiolate monolayer-protected gold nanoparticles (1-C12MPN) with a core size of 1.8 ± 0.2 nm were prepared. 1-C12MPN was modified in high yields via an uncatalyzed 1,3-dipolar cycloaddition (click-type reaction) with a variety of terminal acyl–alkynes under hyperbaric conditions at 11 000 atm. The resulting 1,2,3-triazole modified MPNs (2-C12MPN) were characterized using 1H NMR spectroscopy and were verified by comparison of the spectra to those obtained for the products of the model reactions of 1-azidododecane with the same alkynes. TEM analysis showed that the high-pressure conditions did not affect the size of the gold core, suggesting that the only effect is to facilitate the chemical reaction on the particles.

Electrochemical behavior of gold colloidal alkyl modified silicon surfaces

Herein, we report on the production of nanoelectrode arrays by attaching colloidal gold on silicon-bound mixed self-assembled monolayers of TFA-protected alkenylthiol (C(11)-S-TFA) and undecylenic acid (acid). Effective modification of the surface, tethering of the nanoparticles, and the direct influence of the deprotected alkenylthiol (C(11)-SH) /acid ratio on the number of adherent particles were demonstrated using X-ray photoelectron spectroscopy, electrochemistry, and atomic force microscopy. Cyclic voltammetry showed that the enhancement of electron transfer to the silicon surface by the presence of nanoparticles is influenced by the number of tethered nanoparticles.

Vibrational and electronic characterization of ethynyl derivatives grafted onto hydrogenated Si(111) surfaces

Covalent grafting of ethynyl derivatives (-C triple bond C-H, -C triple bond C-CH3, -C triple bond C-aryl) onto H-terminated Si(111) surfaces was performed by a one-step anodic treatment in Grignard electrolytes. The electrochemical grafting of such ethynyl derivatives, which tends to form ultrathin polymeric layers, can be controlled by the current and charge flow passing through the Si electrode. The prepared ultrathin layers cover the Si surface and had a thickness up to 20 nm, as investigated by the scanning electron microscopy (SEM) technique. Exchanging Cl for Br in the ethynyl Grignard reagent leads to very thin layers, even under the same electrochemical conditions. However, for all ethynyl derivatives, high-resolution synchrotron X-ray photoelectron spectroscopy (SXPS) investigations reveal the incorporation of halogen atoms in the organic layers obtained. Moreover, it was observed that the larger the end group of the ethynyl derivative, the thinner the thickness of the ultrathin polymeric layers as measured by both SXPS and SEM techniques after low and high current flow respectively. For the first time, these new types of ultrathin organic layers on Si surfaces were investigated using infrared spectroscopic ellipsometry (IRSE). The different possible reaction pathways are discussed.

Silicon (100) electrodes resistant to oxidation in aqueous solutions: an unexpected benefit of surface acetylene moieties

Here we report on the functionalization of alkyne-terminated alkyl monolayers on highly doped Si(100) using "click" reactions to immobilize ferrocene derivatives. The reaction of hydrogen-terminated silicon surfaces with a diyne species was shown to afford very robust functional surfaces where the oxidation of the underlying substrate was negligible. Detailed characterization using X-ray photoelectron spectroscopy, X-ray reflectometry, and cyclic voltammetry demonstrated that the surface acetylenes had reacted in moderate yield to give surfaces exposing ferrocene moieties. Upon extensive exposure of the redox-active architecture to oxidative environments during preparative and characterization steps, no evidence of SiOx contaminants was shown for derivatized SAMs prepared from single-component 1,8-nonadiyne, fully acetylenylated, monolayers. An analysis of the redox behavior of the prepared Si(100) electrodes based on relevant parameters such as peak splitting and position and shape of the reduction/oxidation waves depicted a well-behaved redox architecture whose spectroscopic and electrochemical properties were not significantly altered even after prolonged cycling in aqueous media between -100 and 800 mV versus Ag|AgCl. The reported strategy represents an experimentally simple approach for the preparation of silicon-based electrodes where, in addition to close-to-ideal redox behavior, remarkable electrode stability can be achieved. Both the presence of a distal alkyne moiety and temperatures of formation above 100 degrees C were required to achieve this surface stabilization.

Reversible supramolecular functionalization of surfaces: terpyridine ligands as versatile building blocks for noncovalent architectures

We report on the reversible and selective functionalization of surfaces by utilizing supramolecular building blocks. The reversible formation of terpyridine bis-complexes, based on a terpyridine ligand-functionalized monolayer, is used as a versatile supramolecular binding motif. Thereby, click chemistry was applied to covalently bind an acetylene functionalized Fe(II) bis-complex onto azide-terminated self-assembled monolayers. By decomplexation of the formed supramolecular complex, the ligand modified monolayer could be obtained. These monolayers were subsequently used for additional complexation reactions, resulting in the reversible functionalization of the substrates. The proper choice of the coordinating transition metal ions allows the tuning of the binding strength, as well as the physicochemical properties of the formed complexes and thus an engineering of the surface properties.

Combination of different chemical surface reactions for the fabrication of chemically versatile building blocks onto silicon surfaces

The use of nucleophilic displacement reactions on bromine-terminated monolayers is presented to create new functional moieties onto silicon surfaces. Functional amines were used as suitable nucleophiles to introduce versatile building blocks onto self-assembled monolayers to perform further surface chemistry toward the fabrication of surfaces with designed properties by combining compatible chemical routes. These modified substrates were analyzed by suitable surface sensitive techniques. Furthermore, the functional monolayers were used for different postmodification reactions. For example, functional amines facilitated with acetylene groups were applied in the click chemistry approach. The use of amino-functionalized terpyridine units leads to the construction of supramolecular systems, where the choice of the metal monocomplex for the complexation is important for the tuning of the surface properties.

PEGylation of porous silicon using click chemistry

Porous silicon has received considerable interest in recent years in a range of biomedical applications, with its performance determined by surface chemistry. In this work, we investigate the PEGylation of porous silicon wafers using click chemistry. The porous silicon wafer surface chemistry was monitored at each stage of the reaction via photoacoustic Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, whereas sessile drop contact angle and model protein adsorption measurements were used to characterize the final PEGylated surface. This work highlights the simplicity of click-chemistry-based functionalization in tailoring the porous silicon surface chemistry and controlling protein-porous silicon interactions.

"Click-functional" block copolymers provide precise surface functionality via spin coating

There are few existing methods for the quantitative functionalization of surfaces, especially for polymeric substrates. We demonstrate that alkyne end-functional diblock copolymers can be used to provide precise areal densities of reactive functionality on both hard (e.g., glass and silicon oxide) and soft (i.e., polymeric) substrates. Alkyne functionality is extremely versatile because the resultant functional surfaces are reactive toward azide functional molecules by Sharpless click chemistry. Spin-coated films of alpha-alkyne-omega-Br-poly( tert-butylacrylate- b-methylmethacrylate) (poly( tBA-MMA)) spontaneously self-assemble on the aforementioned substrates to present a surface monolayer of PtBA with a thickness in the range of 1 to 9 nm. The PMMA block physisorbs to provide multivalent anchoring onto hard substrates and is fixed onto polymer surfaces by interpenetration with the substrate polymer. The areal density of alkyne functional groups is precisely controlled by adjusting the thickness of the block copolymer monolayer, which is accomplished by changing either the spin coating conditions (i.e., rotational speed and solution concentration) or the copolymer molecular weight. The reactivity of surface-bound alkynes, in 1,3-dipolar cycloaddition reactions or by so-called "click chemistry", is demonstrated by covalent surface immobilization of fluorescently labeled azides. The modificed surfaces are characterized by atomic force microscopy (AFM), contact angle, ellipsometry, fluorescent imaging and angle-dependent X-ray photoelectron spectroscopy (ADXPS) measurements. Microarrays of covalently bound fluorescent molecules are created to demonstrate the approach and their performance is evaluated by determining their fluorescence signal-to-noise ratios.

In vivo tumor cell targeting with "click" nanoparticles

The in vivo fate of nanomaterials strongly determines their biomedical efficacy. Accordingly, much effort has been invested into the development of library screening methods to select targeting ligands for a diversity of sites in vivo. Still, broad application of chemical and biological screens to the in vivo targeting of nanomaterials requires ligand attachment chemistries that are generalizable, efficient, covalent, orthogonal to diverse biochemical libraries, applicable under aqueous conditions, and stable in in vivo environments. To date, the copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition or "click" reaction has shown considerable promise as a method for developing targeted nanomaterials in vitro. Here, we investigate the utility of "click" chemistry for the in vivo targeting of inorganic nanoparticles to tumors. We find that "click" chemistry allows cyclic LyP-1 targeting peptides to be specifically linked to azido-nanoparticles and to direct their binding to p32-expressing tumor cells in vitro. Moreover, "click" nanoparticles are able to stably circulate for hours in vivo following intravenous administration (>5 h circulation time), extravasate into tumors, and penetrate the tumor interstitium to specifically bind p32-expressing cells in tumors. In the future, in vivo use of "click" nanomaterials should expedite the progression from ligand discovery to in vivo evaluation and diversify approaches toward multifunctional nanoparticle development.

Click chemistry in mesoporous materials: functionalization of porous silicon rugate filters

In this paper we report the use of the optical properties of porous silicon photonic crystals, combined with the chemical versatility of acetylene-terminated SAMs, to demonstrate the applicability of "click" chemistry to mesoporous materials. Cu(I)-catalyzed alkyne-azide cycloaddition reactions were employed to modify the internal pore surfaces through a two-step hydrosilylation/cycloaddition procedure. A positive outcome of this catalytic process, here performed in a spatially confined environment, was only observed in the presence of a ligand-stabilized Cu(I) species. Detailed characterization using Fourier transform infrared spectroscopy and optical reflectivity measurements demonstrated that the surface acetylenes had reacted in moderate to high yield to afford surfaces exposing chemical functionalities of interest. The porous silicon photonic crystals modified by the two-step strategy, and exposing oligoether moieties, displayed improved resistance toward the nonspecific adsorption of proteins as determined with fluorescently labeled bovine serum albumin. These results demonstrate that "click" immobilization offers a versatile, experimentally simple, and modular approach to produce functionalized porous silicon surfaces for applications as diverse as porous silicon-based sensing devices and implantable biomaterials.

Polymer brushes grafted to "passivated" silicon substrates using click chemistry

We present herein a versatile method for grafting polymer brushes to passivated silicon surfaces based on the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition (click chemistry) of omega-azido polymers and alkynyl-functionalized silicon substrates. First, the "passivation" of the silicon substrates toward polymer adsorption was performed by the deposition of an alkyne functionalized self-assembled monolayer (SAM). Then, three tailor-made omega-azido linear brush precursors, i.e., PEG-N3, PMMA-N3, and PS-N3 (Mn approximately 20,000 g/mol), were grafted to alkyne-functionalized SAMs via click chemistry in tetrahydrofuran. The SAM, PEG, PMMA, and PS layers were characterized by ellipsometry, scanning probe microscopy, and water contact angle measurements. Results have shown that the grafting process follows the scaling laws developed for polymer brushes, with a significant dependence over the weight fraction of polymer in the grafting solution and the grafting time. The chemical nature of the brushes has only a weak influence on the click chemistry grafting reaction and morphologies observed, yielding polymer brushes with thickness of ca. 6 nm and grafting densities of ca. 0.2 chains/nm2. The examples developed herein have shown that this highly versatile and tunable approach can be extended to the grafting of a wide range of polymer (pseudo-) brushes to silicon substrates without changing the tethering strategy.