A simple synthesis method for nano-metal catalyst supported on mesoporous carbon: the solution plasma process

High-electrocatalytic-activity noble nanoparticles (NPs) supported on carbon nanoballs (CNBs) were synthesized using an innovative plasma-in-liquid method, which is known as solution plasma processing (SPP). This technique uses a one-step method for the synthesis of NPs on carbon materials. CNBs are formed using benzene as a carbon precursor while gold (Au) or platinum (Pt) nanoparticles are generated instantaneously via sputtering from metal electrodes. The synthesized NP/CNBs were annealed at 850 °C in order to increase the conductivity of the material. The results of structural characterizations reveal that the Au and Pt NPs are smaller than 10 nm and have a uniform size distribution, and these NPs are successfully loaded onto highly mesoporous CNBs that have an average pore diameter between 13 and 16 nm. In the results from cyclic voltammetry measurements, the Au/CNBs and Pt/CNBs show clear peaks corresponding to the oxidation and reduction features in the catalytic reactions. Apart from noble nanoparticles, SPP can also be used to synthesize various kinds of NPs including bimetallic NPs loaded on spherical carbon supports by changing the working electrodes. The proposed mechanism for the synthesis is discussed in detail. This method shows potential to be a candidate for the next-generation synthesis of NP/carbon in the future.

Advances in 2D boron nitride nanostructures: nanosheets, nanoribbons, nanomeshes, and hybrids with graphene

The recent surge in graphene research has stimulated interest in the investigation of various 2-dimensional (2D) nanomaterials. Among these materials, the 2D boron nitride (BN) nanostructures are in a unique position. This is because they are the isoelectric analogs to graphene structures and share very similar structural characteristics and many physical properties except for the large band gap. The main forms of the 2D BN nanostructures include nanosheets (BNNSs), nanoribbons (BNNRs), and nanomeshes (BNNMs). BNNRs are essentially BNNSs with narrow widths in which the edge effects become significant; BNNMs are also variations of BNNSs, which are supported on certain metal substrates where strong interactions and the lattice mismatch between the substrate and the nanosheet result in periodic shallow regions on the nanosheet surface. Recently, the hybrids of 2D BN nanostructures with graphene, in the form of either in-plane hybrids or inter-plane heterolayers, have also drawn much attention. In particular, the BNNS-graphene heterolayer architectures are finding important electronic applications as BNNSs may serve as excellent dielectric substrates or separation layers for graphene electronic devices. In this article, we first discuss the structural basics, spectroscopic signatures, and physical properties of the 2D BN nanostructures. Then, various top-down and bottom-up preparation methodologies are reviewed in detail. Several sections are dedicated to the preparation of BNNRs, BNNMs, and BNNS-graphene hybrids, respectively. Following some more discussions on the applications of these unique materials, the article is concluded with a summary and perspectives of this exciting new field.

Fully integrated biochip platforms for advanced healthcare

Recent advances in microelectronics and biosensors are enabling developments of innovative biochips for advanced healthcare by providing fully integrated platforms for continuous monitoring of a large set of human disease biomarkers. Continuous monitoring of several human metabolites can be addressed by using fully integrated and minimally invasive devices located in the sub-cutis, typically in the peritoneal region. This extends the techniques of continuous monitoring of glucose currently being pursued with diabetic patients. However, several issues have to be considered in order to succeed in developing fully integrated and minimally invasive implantable devices. These innovative devices require a high-degree of integration, minimal invasive surgery, long-term biocompatibility, security and privacy in data transmission, high reliability, high reproducibility, high specificity, low detection limit and high sensitivity. Recent advances in the field have already proposed possible solutions for several of these issues. The aim of the present paper is to present a broad spectrum of recent results and to propose future directions of development in order to obtain fully implantable systems for the continuous monitoring of the human metabolism in advanced healthcare applications.

Electronic and optoelectronic nano-devices based on carbon nanotubes

The discovery and understanding of nanoscale phenomena and the assembly of nanostructures into different devices are among the most promising fields of material science research. In this scenario, carbon nanostructures have a special role since, in having only one chemical element, they allow physical properties to be calculated with high precision for comparison with experiment. Carbon nanostructures, and carbon nanotubes (CNTs) in particular, have such remarkable electronic and structural properties that they are used as active building blocks for a large variety of nanoscale devices. We review here the latest advances in research involving carbon nanotubes as active components in electronic and optoelectronic nano-devices. Opportunities for future research are also identified.

Free-standing single-walled carbon nanotube-CdSe quantum dots hybrid ultrathin films for flexible optoelectronic conversion devices

In this work, we described a facile route for the fabrication of free-standing single-walled carbon nanotubes (SWCNT)-CdSe quantum dots (QDs) hybrid ultrathin films and investigated their optoelectronic conversion properties. A free-standing SWCNT film with thickness of ∼36 nm was firstly prepared via vacuum filtration. The film was then immersed into the pre-synthesized oleic acid-capped CdSe QDs (average diameter of 3.5 nm) solution, where CdSe QDs anchored spontaneously onto the surface of SWCNT film to produce SWCNT-CdSe QDs hybrid film. By using pure SWCNT films in different thicknesses as bottom and top electrodes, a flexible all-carbon electrode optoelectronic conversion device with sandwich structure of SWCNT film (thickness of ∼200 nm)/SWCNT-CdSe QDs hybrid film (thickness of ∼36 nm)/SWCNT film (thickness of ∼36 nm) was constructed to generate optoelectronic conversion under illumination of solar-simulated light. Our results demonstrated that the all-carbon electrode structure was effective for charge separation and a sensitive and stable photocurrent signal could be produced in such a device. In addition, our SWCNT-CdSe QDs hybrid film exhibited high flexibility and durability. No clear change in the resistance of the film was detected under bending in various bending angles.

The new age of carbon nanotubes: an updated review of functionalized carbon nanotubes in electrochemical sensors

Since the discovery of carbon nanotubes (CNTs), they have drawn considerable research attention and have shown great potential application in many fields due to their unique structural, mechanical, and electronic properties. However, their native insolubility severely holds back the process of application. In order to overcome this disadvantage and broaden the scope of their application, chemical functionalization of CNTs has attracted great interest over the past several decades and produced various novel hybrid materials with specific applications. Notably, the rapid development of functionalized CNTs used as electrochemical sensors has been successfully witnessed. In this featured article, the recent progress of electrochemical sensors based on functionalized CNTs is discussed and classified according to modifiers covering organic (oxygen functional groups, small organic molecules, polymers, DNA, protein, etc.), inorganic (metal nanoparticles, metal oxide, etc.) and organic-inorganic hybrids. By employing some representative examples, it will be demonstrated that functionalized CNTs as templates, carriers, immobilizers and transducers are promising for the construction of electrochemical sensors.

Aqueously dispersed silver nanoparticle-decorated boron nitride nanosheets for reusable, thermal oxidation-resistant surface enhanced Raman spectroscopy (SERS) devices

The impurity-free aqueous dispersions of boron nitride nanosheets (BNNS) allowed the facile preparation of silver (Ag) nanoparticle-decorated BNNS by chemical reduction of an Ag salt with hydrazine in the presence of BNNS. The resultant Ag-BNNS nanohybrids remained dispersed in water, allowing convenient subsequent solution processing. By using substrate transfer techniques, Ag-BNNS nanohybrid thin film coatings on quartz substrates were prepared and evaluated as reusable surface enhanced Raman spectroscopy (SERS) sensors that were robust against repeated solvent washing. In addition, because ofthe unique thermal oxidation-resistant properties of the BNNS, the sensor devices may be readily recycled by short-duration high temperature air oxidation to remove residual analyte molecules in repeated runs. The limiting factor associated with the thermal oxidation recycling process was the Ostwald ripening effect of Ag nanostructures.

Photoluminescence from SWCNT/Cu Hybrid Nanostructure Synthesized by a Soft Chemical Route

We report a simple wet chemical technique to coat single wall carbon nanotubes (SWCNTs) with Cu nanoparticles. The SWCNT/Cu hybrid nanostructure has been characterized using field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray analysis (EDAX), X-ray diffraction (XRD) study, and Raman spectroscopy. Characteristic optical properties of the nanohybrid structure have been identified through UV-Vis and photoluminescence (PL) spectroscopy. When excited by a radiation of 400 nm wavelength, PL emission in the visible range of 480–620 nm was observed due to charge transfer. This property may be exploited in photovoltaic cells, solar energy conversion, and sensor devices.

Direct measurement of the interactions of amide solvents with single-walled carbon nanotubes using isothermal titration calorimetry

The interaction enthalpy of amide solvents with single-walled carbon nanotube (SWCNT) dispersions is measured using isothermal titration calorimetry (ITC). N,N-Dimethyl-formamide (DMF) and N-methyl-2-pyrilidone (NMP) were used to make dispersions of highly purified (6,5) SWCNTs. Using isothermal titration calorimetry, the ΔH and K(A) terms related to the solvent-nanotube interactions were measured, and ΔG and ΔS of the interaction were determined. It was found that the interaction enthalpy of NMP with SWCNTs dispersed in DMF was exothermic. The addition of a second solvent into a NMP or DMF dispersion produced spontaneous exfoliation of SWCNT bundles as the solvent properties became more favorable. During the titration, a positive change in interaction entropy within the dispersed system due to the unbundling of SWCNTs was measured. From blank titrations of pure DMF into pure NMP and the reverse, dilution enthalpies were also calculated and compared to the literature, along with the corresponding enthalpic interaction coefficients, h(xx) and h(xxx). From our results, ITC appears to be a viable technique for measuring the interaction of solvent molecules with the surface of SWCNTs and for measuring the effect of mixed solvent properties on SWCNT dispersions.

Improving the electrical conductivity of carbon nanotube networks: a first-principles study

We address the issue of the low electrical conductivity observed in carbon nanotube networks using first-principles calculations of the structure, stability, and ballistic transport of different nanotube junctions. We first study covalent linkers, using the nitrene-pyrazine case as a model for conductance-preserving [2 + 1] cycloadditions, and discuss the reasons for their poor performance. We then characterize the role of transition-metal adsorbates in improving mechanical coupling and electrical tunneling between the tubes. We show that the strong hybridization between the transition-metal d orbitals with the π orbitals of the nanotube can provide an excellent electrical bridge for nanotube-nanotube junctions. This effect is maximized in the case of nitrogen-doped nanotubes, thanks to the strong mechanical coupling between the tubes mediated by a single transition metal adatom. Our results suggest effective strategies to optimize the performance of carbon nanotube networks.

Template directed formation of nanoparticle decorated multi-walled carbon nanotube bundles with uniform diameter

Bundles of multi-walled carbon nanotubes of uniform diameter decorated with Ni nanoparticles were synthesized using mesoporous silicates as templates. The ordered morphology and the narrow pore size distribution of mesoporous silicates provide an ideal platform to synthesize uniformly sized carbon nanotubes. In addition, homogeneous sub-10 nm pore sizes of the templates allow in situ formation of catalytic nanoparticles with uniform diameters which end up decorating the carbon nanotubes. The resulting carbon nanotubes are multi-walled with a uniform diameter corresponding to the pore diameter of the template used during the synthesis that are decorated with the catalysts used to synthesize them. They have a narrow size distribution which can be used in many energy related fields of research.

Photochemical approach toward deposition of gold nanoparticles on functionalized carbon nanotubes

The development of new methods for the facile synthesis of hybrid nanomaterials is of great importance due to their importance in nanotechnology. In this work, we report a new method to deposit Au nanoparticles on the surface of single-walled carbon nanotubes (SWCNTs). Our approach consists of a one pot synthesis in which Au nanoparticles are generated in the presence of a photoreducing agent (Irgacure-2959) and carboxyl or polymer-functionalized SWCNTs (f-SWCNTs). We have observed that when carbon nanotubes are functionalized with polymers containing pendant amino groups, the latter can act as specific nucleation sites for well-dispersed deposition of Au nanoparticles. The surface coverage of the Au nanoparticles can be observed by transmission electron spectroscopy. These observations are compared to that of carboxyl functionalized SWCNTs, in which less surface coverage was observed. The f-SWCNT/Au nanocomposites were also characterized by UV-vis, infrared, and Raman spectroscopy and thermogravimetric analysis (TGA). This facile and effective route can be implemented to deposit gold nanoparticles on other surface-functionalized carbon nanotubes.

Formation of efficient catalytic silver nanoparticles on carbon nanotubes by adenine functionalization

Stuck together: adenine/carbon nanotube hybrids trigger the formation of controlled-size catalytic silver nanoparticles on the nanotube surface. The catalytic efficiency of the resulting species was assessed in the oxidation of 2-methylhydroquinone to its corresponding benzoquinone, with complete recovery and without loss of activity of the catalyst.