Graphene and its derivatives as biomedical materials: future prospects and challenges

Graphene and its derivatives possess some intriguing properties, which generates tremendous interests in various fields, including biomedicine. The biomedical applications of graphene-based nanomaterials have attracted great interests over the last decade, and several groups have started working on this field around the globe. Because of the excellent biocompatibility, solubility and selectivity, graphene and its derivatives have shown great potential as biosensing and bio-imaging materials. Also, due to some unique physico-chemical properties of graphene and its derivatives, such as large surface area, high purity, good bio-functionalizability, easy solubility, high drug loading capacity, capability of easy cell membrane penetration, etc., graphene-based nanomaterials become promising candidates for bio-delivery carriers. Besides, graphene and its derivatives have also shown interesting applications in the fields of cell-culture, cell-growth and tissue engineering. In this article, a comprehensive review on the applications of graphene and its derivatives as biomedical materials has been presented. The unique properties of graphene and its derivatives (such as graphene oxide, reduced graphene oxide, graphane, graphone, graphyne, graphdiyne, fluorographene and their doped versions) have been discussed, followed by discussions on the recent efforts on the applications of graphene and its derivatives in biosensing, bio-imaging, drug delivery and therapy, cell culture, tissue engineering and cell growth. Also, the challenges involved in the use of graphene and its derivatives as biomedical materials are discussed briefly, followed by the future perspectives of the use of graphene-based nanomaterials in bio-applications. The review will provide an outlook to the applications of graphene and its derivatives, and may open up new horizons to inspire broader interests across various disciplines.

Enhancement of Adsorption Performance for Organic Molecules by Combined Effect of Intermolecular Interaction and Morphology in Porous rGO-Incorporated Hydrogels

In this study, we developed reduced graphene oxide (rGO)-incorporated porous agarose (Ar-rGO) composites that were prepared via a "one-pot" sol-gel method involving a mixing and vacuum freeze-drying process. These composites represent an easy-to-use adsorbent for organic contaminant removal. Ar-rGOs can efficiently adsorb organic molecules, especially aromatic organic compounds from wastewater, because of the synergistic effect between the agarose bundles, which function as a water absorption site, and the rGO sheets, which function as active sites for pollutant binding. The pore structures and morphology of the Ar-rGO composites varied according to the added rGO, resulting in effective water infiltration into the composites. The main adsorption mechanism of the aromatic organic compounds onto Ar-rGOs involved π-π interactions with the rGO sheets. The surface interaction was more effective for adsorbing/desorbing the aromatic pollutants than the electrostatic interaction via the O-containing functional groups. In addition, we confirmed that Ar-rGO is highly stable over the entire pH range (1-13) because of the presence of the rGO sheets.

Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels

Graphene-based mixed-dimensional materials hybridization is important for a myriad of applications. However, conventional manufacturing techniques face critical challenges in producing arbitrary geometries with programmable features, continuous interior networks, and multimaterials homogeneity. Here we propose a generalized three-dimensional (3D) printing methodology for graphene aerogels and graphene-based mixed-dimensional (2D + nD, where n is 0, 1, or 2) hybrid aerogels with complex architectures, by the development of hybrid inks and printing schemes to enable mix-dimensional hybrids printability, overcoming the limitations of multicomponents inhomogeneity and harsh post-treatments for additives removal. Importantly, nonplanar designed geometries are also demonstrated by shape-conformable printing on curved surfaces. We further demonstrate the 3D-printed hybrid aerogels as ultrathick electrodes in a symmetric compression tolerant microsupercapacitor, exhibiting quasi-proportionally enhanced areal capacitances at high levels of mass loading. The excellent performance is attributed to the sufficient ion- and electron-transport paths provided by the 3D-printed highly interconnected networks. The encouraging finding indicates tremendous potentials for practical energy storage applications. As a proof of concept, this general strategy provides avenues for various next-generation complex-shaped hybrid architectures from microscale to macroscale, for example, seawater desalination devices, electromagnetic shielding systems, and so forth.

Bimetallic junction mediated synthesis of multilayer graphene edges towards ultrahigh capacity for lithium ion batteries

In this work, we report on a novel strategy to synthesize high-density graphene edges on a vertically-aligned nanorod array substrate based on multiple segmented Ni-Au units. The growth of graphene layers on Ni and Au was performed by chemical vapor deposition (CVD) leading to the effective generation of edge-rich multilayer graphene due to the distinct carbon solubility. The composite material was applied as an anode in a lithium ion battery (LIB) whose discharging capacity was found to closely depend on the total number of Ni-Au junctions within the vertical nanorods. Graphene deposited on the 19-junction composite Ni-(Au-Ni)₉ exhibited an ultrahigh capacity of 86.3 μAh cm^-2 at 50 μA cm^-2 which was much higher than graphene deposited on 1-junction, 2-junction and pure Ni nanorods. This ultrahigh capacity was mainly ascribed to the generation of high-density graphene edges engineered by the bimetallic junction. The proposed strategy opens new appealing routes to synthesize high-density graphene edges using bimetallic junctions, which is promising for increasing the performance of LIBs and other electrochemical energy systems (supercapacitors, fuel cells, etc.).

Catalyst-free one step synthesis of large area vertically stacked N-doped graphene-boron nitride heterostructures from biomass source

A procedure for the one-step preparation of films of few-layer N-doped graphene on top of nanometric hexagonal boron nitride sheets ((N)graphene/h-BN) based on the pyrolysis at 900 °C under an inert atmosphere of a film of chitosan containing about 20 wt% of ammonium borate salt as a precursor is reported. During the pyrolysis a spontaneous segregation of (N)graphene and boron nitride layers takes place. The films were characterized by optical microscopy that shows a thin graphene overlayer covering the boron nitride layer, the latter showing characteristic cracks, and by XPS measurements at different monitoring angles from 0° to 50° where an increase in the proportion of C vs. B and N was observed. The resulting (N)graphene/h-BN films were also characterized by Raman, HRTEM, SEM, FIB-SEM and AFM. The thickness of the (N)graphene and h-BN layers can be controlled by varying the concentration of precursors and the spin coating rate and is typically below 5 nm. Electrical conductivity measurements using microelectrodes can cause the burning of the graphene layer at high intensities, while lower intensities show that (N)graphene/h-BN films behave as capacitors in the range of positive voltages.

Three-dimensional porous graphene networks expand graphene-based electronic device applications

In recent years, there has been increasing demand for 3D porous graphene structures with excellent 2D characteristics and great potential. As one avenue, several approaches for fabricating 3D porous graphene network structures have been proposed to realize multi-functional graphene materials with 2D graphene structures. Herein, we overview characteristics of 3D porous graphene for applications in future electronic devices along with physical insights into "2D to 3D graphene", in which the characters of 2D graphene such as massless Dirac fermions are well preserved. The present review thus summarizes recent 3D porous graphene studies with a perspective for providing new and board applications of graphene in electronic devices.

Insight into the structural and electronic nature of chemically exfoliated molybdenum disulfide nanosheets in aqueous dispersions

Chemical exfoliation of molybdenum disulfide (2H-MoS₂) for preparing high-yield single-layer sheets has attracted considerable attention in recent years. However, the stability and nature of the resulting nanosheets are poorly understood. Storing the dispersion in ambient air brings about the reoxidation of the nanosheets, releasing their residual negative charges into the environment. The reoxidation facilitates lateral fractures and destabilizes the dispersion. In-plane X-ray diffraction of the nanosheets indicates that they have a 1T structure with a 2D √3 × 1 rectangular cell as the intrinsic structure for chemically exfoliated MoS₂. We found that the 1T structure was preserved after reoxidation upon aging the dispersions in air, suggesting the formation of metastable neutral MoS₂. The changes in the chemical nature of the nanosheets can be monitored by X-ray diffraction of the restacked nanosheets. The restacked nanosheets, obtained by drying the freshly prepared dispersion, exhibited an expanded bilayer hydrate structure, accommodating Li ions. On the other hand, dried samples from the aged dispersions were substantially composed of a deintercalated phase and the bilayer hydrate. Upon prolonged aging, the former phase became predominant with total disappearance of the latter. This evolution suggests that the reoxidation occurred sheet by sheet with a direct restoration of the original oxidation states of the nanosheets, whereas the oxidation states of the nanosheets can be discrete at 4+ and (4 - δ)+.

A new tactics for the detection of S. aureus via paper based geno-interface incorporated with graphene nano dots and zeolites

Staphylococcus aureus (S. aureus) is a pathogenic bacteria which causes infectious diseases and food poisoning. Current diagnostic methods for infectious disease require sophisticated instruments, long analysis time and expensive reagents which restrict their application in resource-limited settings. Electrochemical paper based analytical device (EPAD) was developed by integrating graphene nano dots (GNDs) and zeolite (Zeo) using specific DNA probe. The ssDNA/GNDs-Zeo modified paper based analytical device (PAD) was characterized using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The genosensor was optimized at pH7.4 and incubation temperature of 30°C. A linear current response with respect to target DNA concentrations was obtained. The limit of detection (LOD) of the proposed sensor was found out to be 0.1nM. The specificity was confirmed by introducing non-complimentary target DNA to ssDNA/GNDs-Zeo modified PAD. The suitability of the proposed EPAD genosensor was demonstrated with fruit juice samples mixed with S. aureus. The proposed EPAD genosensor is a low cost, highly specific, easy to fabricate diagnostic device for detection of S. aureus bacteria which requires very low sample volume and minimum analysis time of 10s.

Computational approaches to cell-nanomaterial interactions: keeping balance between therapeutic efficiency and cytotoxicity

Owing to their unique properties, nanomaterials have been widely used in biomedicine since they have obvious inherent advantages over traditional ones. However, nanomaterials may also cause dysfunction in proteins, genes and cells, resulting in cytotoxic and genotoxic responses. Recently, more and more attention has been paid to these potential toxicities of nanomaterials, especially to the risks of nanomaterials to human health and safety. Therefore, when using nanomaterials for biomedical applications, it is of great importance to keep the balance between therapeutic efficiency and cytotoxicity (i.e., increase the therapeutic efficiency as well as decrease the potential toxicity). This requires a deeper understanding of the interactions between various types of nanomaterials and biological systems at the nano/bio interface. In this review, from the point of view of theoretical researchers, we will present the current status regarding the physical mechanism of cytotoxicity caused by nanomaterials, mainly based on recent simulation results. In addition, the strategies for minimizing the nanotoxicity naturally and artificially will also be discussed in detail. Furthermore, we should notice that toxicity is not always bad for clinical use since causing the death of specific cells is the main way of treating disease. Enhancing the targeting ability of nanomaterials to diseased cells and minimizing their side effects on normal cells will always be hugely challenging issues in nanomedicine. By combining the latest computational studies with some experimental verifications, we will provide special insights into recent advances regarding these problems, especially for the design of novel environment-responsive nanomaterials.

Boosted visible light photodegradation activity of boron doped rGO/g-C3N4 nanocomposites: the role of C–O–C bonds

Boron doping is an effective way to promote the chemical interaction between rGO and g-C₃N₄.

Three-dimensional Co3O4@MWNTs nanocomposite with enhanced electrochemical performance for nonenzymatic glucose biosensors and biofuel cells

Three-dimensional nanoarchitectures of Co₃O₄@multi-walled carbon nanotubes (Co₃O₄@MWNTs) were synthesized via a one-step process with hydrothermal growth of Co₃O₄ nanoparticles onto MWNTs. The structure and morphology of the Co₃O₄@MWNTs were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller, scanning electron microscopy and transmission electron microscopy. The electrocatalytic mechanism of the Co₃O₄@MWNTs was studied by X-ray photoelectron spectroscopy and cyclic voltammetry. Co₃O₄@MWNTs exhibited high electrocatalytic activity towards glucose oxidation in alkaline medium and could be used in nonenzymatic electrochemical devices for glucose oxidation. The open circuit voltage of the nonenzymatic glucose/O₂ fuel cell was 0.68 V, with a maximum power density of 0.22 mW cm^-2 at 0.30 V. The excellent electrochemical properties, low cost, and facile preparation of Co₃O₄@MWNTs demonstrate the potential of strongly coupled oxide/nanocarbon hybrid as effective electrocatalyst in glucose fuel cells and biosensors.

Flexible Graphene-Based Wearable Gas and Chemical Sensors

Wearable electronics is expected to be one of the most active research areas in the next decade; therefore, nanomaterials possessing high carrier mobility, optical transparency, mechanical robustness and flexibility, lightweight, and environmental stability will be in immense demand. Graphene is one of the nanomaterials that fulfill all these requirements, along with other inherently unique properties and convenience to fabricate into different morphological nanostructures, from atomically thin single layers to nanoribbons. Graphene-based materials have also been investigated in sensor technologies, from chemical sensing to detection of cancer biomarkers. The progress of graphene-based flexible gas and chemical sensors in terms of material preparation, sensor fabrication, and their performance are reviewed here. The article provides a brief introduction to graphene-based materials and their potential applications in flexible and stretchable wearable electronic devices. The role of graphene in fabricating flexible gas sensors for the detection of various hazardous gases, including nitrogen dioxide (NO₂), ammonia (NH₃), hydrogen (H₂), hydrogen sulfide (H₂S), carbon dioxide (CO₂), sulfur dioxide (SO₂), and humidity in wearable technology, is discussed. In addition, applications of graphene-based materials are also summarized in detecting toxic heavy metal ions (Cd, Hg, Pb, Cr, Fe, Ni, Co, Cu, Ag), and volatile organic compounds (VOCs) including nitrobenzene, toluene, acetone, formaldehyde, amines, phenols, bisphenol A (BPA), explosives, chemical warfare agents, and environmental pollutants. The sensitivity, selectivity and strategies for excluding interferents are also discussed for graphene-based gas and chemical sensors. The challenges for developing future generation of flexible and stretchable sensors for wearable technology that would be usable for the Internet of Things (IoT) are also highlighted.

Atomic-Thick PtNi Nanowires Assembled on Graphene for High-Sensitivity Extracellular Hydrogen Peroxide Sensors

H₂O₂ sensors with high sensitivity and selectivity are essential for monitoring the normal activities of cells. Inorganic catalytic nanomaterials show the obvious advantage in boosting the sensitivity of H₂O₂ sensors; however, the H₂O₂ detection limit of reported inorganic catalysts is still limited, which is not suitable for high-sensitivity detection of H₂O₂ in real cells. Herein, novel atomic-thick PtNi nanowires (NWs) were synthesized and assembled on reduced graphene oxide (rGO) via an ultrasonic self-assembly method to attain PtNi NWs/rGO composite for boosting the electroanalysis of H₂O₂. In 0.05 M phosphate-buffered saline (pH 7.4) solution, the as-prepared PtNi NWs/rGO shows an extraordinary performance in quantifying H₂O₂ in a wide range of concentrations from 1 nM to 5.3 mM. Significantly, the detection limit of PtNi NWs/rGO reaches unprecedented 0.3 nM at an applied potential of -0.6 V (vs Ag/AgCl), which enables the detection of traced amounts of H₂O₂ released from Raw 264.7 cells. The excellent performance of H₂O₂ detection on PtNi NWs/rGO is ascribed to the high-density active sites of atomic-thick PtNi NWs.

When stem cells meet graphene: Opportunities and challenges in regenerative medicine

Recent advances in stem cell research and nanotechnology have significantly influenced the landscape of tissue engineering and regenerative medicine. Precise and reproducible control of the fate of stem cells and their lineage specification have, therefore, become more crucial than ever for the success of stem cell-based technologies. Extensive research has been geared towards developing materials that are capable of mimicking the physiological microenvironment of stem cells and at the same time, controlling their eventual fate. An interesting example of these materials is two-dimensional graphene and its related derivatives. A high specific surface area coupled with superior chemical stability, biocompatibility, and flexibility in functionalization render graphene-based nanomaterials one of the most exciting platforms for tissue engineering and regenerative medicine applications, especially for stem cell growth, proliferation, and differentiation. In this review, we discuss the love-hate relationship between stem cells and graphene-based nanomaterials in tissue engineering and regenerative medicine. We first discuss the role and importance of stem cells in tissue engineering and regenerative medicine. We then highlight the use of nanomaterials for stem cell control, the interaction between stem cells and graphene nanomaterials as well as their biocompatibility, biodistribution, and biodegradability considerations. We also offer our perspectives on the various challenges and opportunities facing the use of graphene and its derivatives for stem cell growth and differentiation.

Computational Study of Low Interlayer Friction in Tin+1Cn (n = 1, 2, and 3) MXene

The friction of adjacent Ti_n+1C_n (n = 1, 2, and 3) MXene layers is investigated using density functional theory (DFT) calculations and classical molecular dynamics simulations with ReaxFF potentials. The calculations reveal the sliding pathways in all three MXene systems with low energy barriers. The friction coefficients for interlayer sliding are evaluated using static calculations. Both DFT and ReaxFF methods predict friction coefficients between 0.24 and 0.27 for normal loads less than 1.2 GPa. The effect of titanium (Ti) vacancies in sublayers and terminal oxygen (O) vacancies at surfaces on the interlayer friction is further investigated using the ReaxFF potential. These defects are found to increase the friction coefficients by increasing surface roughness and creating additional attractive forces between adjacent layers. However, these defective MXenes still maintain friction coefficients below 0.31. We also consider functionalized Ti₃C₂ MXene terminated with -OH and -OCH₃ and find that compared to the -O-terminated surface both groups further reduce the interlayer friction coefficient to 0.10-0.14.

Rapid Fabrication of Low-Density Porous Tin Monolith via Hydrogen Bulb Dynamics Templates

Low-density porous tin monolith with the pteridophyta leaf-like structure was fast fabricated by a facile route via the electrochemical deposition process via hydrogen bulb dynamics templates within less than 1[Formula: see text]min. The samples were characterized by scanning electron microscope, X-ray diffraction and so on. The results indicated that the deposited tin porous structure could be easily controlled to form film or monolith by adjusting the tin precursor concentration and surfactant content.

Formation of toroids by self-assembly of an α-α corner mimetic: supramolecular cyclization

An α-α corner mimetic self-assembles to form a rod-like supramolecular structure which bends and closes end-to-end like a cyclization reaction to form uniform toroids. Each peptide fragment containing l-leucine, α-aminoisobutyric acid (Aib) and l-tyrosine forms rigid 3₁₀ helical structures stabilized by multiple intramolecular N-HO hydrogen bonds. Two 3₁₀ helices are connected by the spacer 3-aminomethyl-benzylamine and maintain an angular distance of 120° and therefore mimic the α-α corner motif of a protein super secondary structure. The individual α-α corner subunits are themselves regularly interlinked through multiple water mediated intermolecular hydrogen-bonding interactions to form the rod-like supramolecular structure and toroids. The formation of the supramolecular structure has been proven with X-ray crystallography and other spectroscopic techniques. The cyclization of the supramolecular structure and toroid formation were studied by optical microscope, AFM and FE-SEM experiments. Despite other assignments such as exfoliation of graphene from graphite, the compound exhibits significant memory to finally produce the toroids.

Space irradiation-induced damage to graphene films

Graphene with impressive electrical, optical, chemical and mechanical properties has promising potential applications for photoelectric devices and mechanical components installed on the space facilities, which will probably face hostile environments including high-energy particulate irradiation. Here we explored the effect of simulated space irradiation on the structure and properties of large-area single-layer and multi-layer graphene films (about four layers) including atomic oxygen (AO), electron (EL) and proton (PR). AO with strong oxidizing capacity reacts with carbon atoms of graphene films and generates carbon dioxide, high-energy PR leads to polymorphic atomic defects in graphene through collision and excitation effects. Miraculously, EL irradiation causes little damage to the graphene films because of the excellent conductivity. Graphene ripples are broken by irradiation and adapt their shape or structure with respect to the substrate via thermodynamic stability, which causes the change of the physical and mechanical properties of graphene.

Mini Review: Nanosheet Technology towards Biomedical Application

The fabrication technique of ultrathin film (commonly known as nanosheets) has been significantly developed over the years. Due to the mechanical properties of nanosheets, such as high levels of adhesion and flexibility, this made nanosheets the ideal candidate in biomedical applications. In this review, innovative biomedical applications of nanosheets are discussed, which include, drug delivery, wound treatment, and functional nanosheets towards flexible biodevices, etc. Finally, the future outlook of nanosheet technology towards a biomedical application is discussed.

Three-Dimensional Printed Graphene Foams

An automated metal powder three-dimensional (3D) printing method for in situ synthesis of free-standing 3D graphene foams (GFs) was successfully modeled by manually placing a mixture of Ni and sucrose onto a platform and then using a commercial CO₂ laser to convert the Ni/sucrose mixture into 3D GFs. The sucrose acted as the solid carbon source for graphene, and the sintered Ni metal acted as the catalyst and template for graphene growth. This simple and efficient method combines powder metallurgy templating with 3D printing techniques and enables direct in situ 3D printing of GFs with no high-temperature furnace or lengthy growth process required. The 3D printed GFs show high-porosity (∼99.3%), low-density (∼0.015g cm^-3), high-quality, and multilayered graphene features. The GFs have an electrical conductivity of ∼8.7 S cm^-1, a remarkable storage modulus of ∼11 kPa, and a high damping capacity of ∼0.06. These excellent physical properties of 3D printed GFs indicate potential applications in fields requiring rapid design and manufacturing of 3D carbon materials, for example, energy storage devices, damping materials, and sound absorption.

Facile fabrication of superparamagnetic graphene/polyaniline/Fe3O4 nanocomposites for fast magnetic separation and efficient removal of dye

Using graphene as adsorbent for removal of pollutants from polluted water is commonly recognized to be costly because the graphene is usually produced by a very complex process. Herein, a simple and eco-friendly method was employed to fabricate efficient superparamagnetic graphene/polyaniline/Fe₃O₄ nanocomposites for removal of dyes. The exfoliation of graphite as nanosheets and the functionalization of nanosheets with polyaniline and Fe₃O₄ nanoparticles were simultaneously achieved via a one-pot reaction process combining the intercalation polymerization of aniline and the co-precipitation of the residual Fe³⁺ and the generated Fe²⁺. The obtained graphene/polyaniline/Fe₃O₄ nanocomposites exhibited excellent adsorption performance for Congo red, even in the presence of Brilliant green. The adsorption kinetics and adsorption isotherms were well fitted with pseudo second-order kinetic model and Langmuir isotherm model, respectively. In a word, this method is simple and industrially feasible, which provides a new approach to fabricate highly efficient graphene-based adsorbents on large scale for removal of dyes. In addition, it also can be used to exfoliate other two-dimensional materials, such as boron nitride, carbon nitride and MoS₂ for a range of possible applications.

Intracellular localization and toxicity of graphene oxide and reduced graphene oxide nanoplatelets to mussel hemocytes in vitro

Recently, graphene materials have attracted tremendous research interest due to their unique physicochemical properties that hold great promise in electronics, energy, materials and biomedical areas. Graphene oxide (GO) is one of the most extensively studied graphene derivatives. In order to improve GO electrical properties, nanoplatelets are chemically reduced, thus increasing nanoplatelet conductivity. This reduced GO (rGO) shows different properties and behavior compared to GO. Graphene-based wastes are expected to end up in the marine environment. Here we aimed to assess the potential toxic effects of GO and rGO to marine organisms by using in vitro assays with mussel (Mytilus galloprovincialis) hemocytes. Cells were exposed to a wide range of concentrations (up to 100mg/L) of GO (with and without polyvinylpyrrolidone-PVP as stabilizing agent: GO and GO-PVP) and rGO with PVP (rGO-PVP) to assess cytotoxicity and cell membrane integrity. Then, cells were exposed to sublethal concentrations of GO and rGO-PVP to assess their subcellular distribution through transmission electron microscopy (TEM) and to evaluate their effects on ROS production. GO, GO-PVP and rGO-PVP showed low and concentration-dependent cytotoxicity. rGO-PVP (LC50=29.902 and 33.94mg/L depending on the origin) was more toxic than GO (LC50=49.84 and 54.51mg/L depending on the origin) and GO-PVP (LC50=43.72mg/L). PVP was not toxic to hemocytes but increased bioavailability and toxicity of nanoplatelets. At TEM, GO and rGO-PVP nanoplatelets caused invaginations and perforations of the plasma membrane, which agrees with the observed decrease in cell membrane integrity. Nanoplatelets were internalized, at a higher extent for rGO-PVP than for GO, and found in the cytosol and in endolysosomal vesicles of hemocytes. Both GO and rGO-PVP increased ROS production at the highest sublethal concentration tested. In conclusion, GO, GO-PVP and rGO-PVP are not highly toxic to mussel cells but they cause membrane damage and their toxicity is ROS-mediated. Finally, in vitro assays with mussel hemocytes are sensitive tools to detect toxic effects of graphene-based nanomaterials.

Carbon-Based Functional Materials Derived from Waste for Water Remediation and Energy Storage

Carbon-based functional materials hold the key for solving global challenges in the areas of water scarcity and the energy crisis. Although carbon nanotubes (CNTs) and graphene have shown promising results in various fields of application, their high preparation cost and low production yield still dramatically hinder their wide practical applications. Therefore, there is an urgent call for preparing carbon-based functional materials from low-cost, abundant, and sustainable sources. Recent innovative strategies have been developed to convert various waste materials into valuable carbon-based functional materials. These waste-derived carbon-based functional materials have shown great potential in many applications, especially as sorbents for water remediation and electrodes for energy storage. Here, the research progress in the preparation of waste-derived carbon-based functional materials is summarized, along with their applications in water remediation and energy storage; challenges and future research directions in this emerging research field are also discussed.