Enzymatic reactions in confined environments

Within each biological cell, surface- and volume-confined enzymes control a highly complex network of chemical reactions. These reactions are efficient, timely, and spatially defined. Efforts to transfer such appealing features to in vitro systems have led to several successful examples of chemical reactions catalysed by isolated and immobilized enzymes. In most cases, these enzymes are either bound or adsorbed to an insoluble support, physically trapped in a macromolecular network, or encapsulated within compartments. Advanced applications of enzymatic cascade reactions with immobilized enzymes include enzymatic fuel cells and enzymatic nanoreactors, both for in vitro and possible in vivo applications. In this Review, we discuss some of the general principles of enzymatic reactions confined on surfaces, at interfaces, and inside small volumes. We also highlight the similarities and differences between the in vivo and in vitro cases and attempt to critically evaluate some of the necessary future steps to improve our fundamental understanding of these systems.

Are specific buffer effects the new frontier of Hofmeister phenomena? Insights from lysozyme adsorption on ordered mesoporous silica

Different 10 mM buffers at the same nominal pH affect specifically the adsorption of lysozyme on ordered mesoporous silica. It emerges that specific buffer effects should be considered within ‘Hofmeister phenomena’.

Nanomaterials for biocatalyst immobilization – state of the art and future trends

Advantages, drawbacks and trends in nanomaterials for enzyme immobilization.

Preparation of a magnetic responsive immobilized lipase–cellulose microgel catalyst system: role of the surface properties of the magnetic cellulose microgel

Surface modification of the magnetic cellulose particles has been conducted by using AEAPS, the modified magnetic cellulose particles were then used for the immobilization of lipase for catalysis reaction.

A self-directed and reconstructible immobilization strategy: DNA directed immobilization of alkaline phosphatase for enzyme inhibition assays

A DNA-directed immobilization technique is used to develop a common method for the reversible and self-directed immobilization of enzymes.

Cellulose as an efficient matrix for lipase and transaminase immobilization

Continuous-flow biocatalysis using immobilized lipases and transaminases in order to synthesize chiral alcohols and amines respectively.

Stable and Simple Immobilization of Proteinase K Inside Glass Tubes and Microfluidic Channels

Engyodontium album proteinase K (proK) is widely used for degrading proteinaceous impurities during the isolation of nucleic acids from biological samples, or in proteomics and prion research. Toward applications of proK in flow reactors, a simple method for the stable immobilization of proK inside glass micropipette tubes was developed. The immobilization of the enzyme was achieved by adsorption of a dendronized polymer-enzyme conjugate from aqueous solution. This conjugate was first synthesized from a polycationic dendronized polymer (denpol) and proK and consisted, on average, of 2000 denpol repeating units and 140 proK molecules, which were attached along the denpol chain via stable bis-aryl hydrazone bonds. Although the immobilization of proK inside the tube was based on nonspecific, noncovalent interactions only, the immobilized proK did not leak from the tube and remained active during prolonged storage at 4 °C and during continuous operation at 25 °C and pH = 7.0. The procedure developed was successfully applied for the immobilization of proK on a glass/PDMS (polydimethylsiloxane) microchip, which is a requirement for applications in the field of proK-based protein analysis with such type of microfluidic devices.

Protein Analysis by Ambient Ionization Mass Spectrometry Using Trypsin-Immobilized Organosiloxane Polymer Surfaces

In the growing field of proteomic research, rapid and simple protein analysis is a crucial component of protein identification. We report the use of immobilized trypsin on hybrid organic-inorganic organosiloxane (T-OSX) polymers for the on-surface, in situ digestion of four model proteins: melittin, cytochrome c, myoglobin, and bovine serum albumin. Tryptic digestion products were sampled, detected, and identified using desorption electrospray ionization mass spectrometry (DESI-MS) and nanoDESI-MS. These novel, reusable T-OSX arrays on glass slides allow for protein digestion in methanol:water solvents (1:1, v/v) and analysis directly from the same polymer surface without the need for sample preparation, high temperature, and pH conditions typically required for in-solution trypsin digestions. Digestion reactions were conducted with 2 μL protein sample droplets (0.35 mM) at incubation temperatures of 4, 25, 37, and 65 °C and digestion reaction times between 2 and 24 h. Sequence coverages were dependent on the hydrophobicity of the OSX polymer support and varied by temperature and digestion time. Under the best conditions, the sequence coverages, determined by DESI-MS, were 100% for melittin, 100% for cytochrome c, 90% for myoglobin, and 65% for bovine serum albumin.

Silver Enhancement for Transmission Electron Microscopy Imaging of Antibody Fragment-Gold Nanoparticles Conjugates Immobilized on Ordered Mesoporous Silica

Ordered mesoporous silica (OMS) materials are receiving great attention as possible carriers for valuable but unstable drugs as, for example, therapeutic proteins. A key issue is to prove that the therapeutic protein is effectively able to penetrate the pores of OMS during the adsorption step. Here, we immobilized an antibody fragment [F(ab')GAMIgG] conjugated with ultrasmall gold nanoparticles (GNPs) onto amino-functionalized SBA-15 (SBA-NH2) mesoporous silica. The aim of this work is the visualization of the location of the conjugates adsorbed onto SBA-NH2 with transmission electron microscopy (TEM). Because of the ultrasmall size of GNPs (<1 nm), we use the silver enhancement procedure to amplify their size. In this procedure, ultrathin sections of conjugate-loaded SBA-NH2 particles are prepared by a ultramicrotome sectioning technique. The ultrasmall GNPs located on the top side of the 70-90 nm thick slices act as microcrystallization nucleation sites for the deposition of reduced metallic silver. Consequently, the ultrasmall GNPs increase their size. This allows for the direct imaging of the conjugates adsorbed. We clearly localize the F(ab')GAMIgG-GNPs conjugates either on the external surface of the particles or inside the mesopores of SBA-NH2 through TEM.

Immobilization of Microbes for Bioremediation of Crude Oil Polluted Environments: A Mini Review

Petroleum hydrocarbons are the most common environmental pollutants in the world and oil spills pose a great hazard to terrestrial and marine ecosystems. Oil pollution may arise either accidentally or operationally whenever oil is produced, transported, stored and processed or used at sea or on land. Oil spills are a major menace to the environment as they severely damage the surrounding ecosystems. To improve the survival and retention of the bioremediation agents in the contaminated sites, bacterial cells must be immobilized. Immobilized cells are widely tested for a variety of applications. There are many types of support and immobilization techniques that can be selected based on the sort of application. In this review article, we have discussed the potential of immobilized microbial cells to degrade petroleum hydrocarbons. In some studies, enhanced degradation with immobilized cells as compared to free living bacterial cells for the treatment of oil contaminated areas have been shown. It was demonstrated that immobilized cell to be effective and is better, faster, and can be occurred for a longer period.

Interfacial Polymerization of Dopamine in a Pickering Emulsion: Synthesis of Cross-Linkable Colloidosomes and Enzyme Immobilization at Oil/Water Interfaces

Colloidosomes are promising carriers for immobilizing enzyme for catalytic purposes in aqueous/organic media. However, they often suffer from one or more problems regarding catalytic performance, stability, and recyclability. Here, we report a novel approach for the synthesis of cross-linkable colloidosomes by the selective polymerization of dopamine at oil/water interfaces in a Pickering emulsion. An efficient enzyme immobilization method was further developed by covalently bonding enzymes to the polydopamine (PDA) layer along with the formation of such colloidosomes with lipase as a model enzyme. In this enzyme system, the PDA layer served as a cross-linking layer and enzyme support for simultaneously enhancing the colloidosomes' stability and improving surface availability of the enzymes for catalytic reaction. It was found that the specific activity of lipases immobilized on the colloidosome shells was 8 and 1.4 times higher than that of free lipase and encapsulated lipase positioned in the aqueous cores of colloidosomes, respectively. Moreover, the immobilized lipases demonstrated excellent operational stability and recyclability, retaining 86.6% of enzyme activity after 15 cycles. It is therefore reasonable to expect that this novel approach for enzyme immobilization has great potential to serve as an important technique for the construction of biocatalytic systems.

Synthesis of novel ion-imprinted polymers by two different RAFT polymerization strategies for the removal of Cs(i) from aqueous solutions

In this work, two novel Cs(i) ion-imprinted polymers (Cs(i)-IIP1 and Cs(i)-IIP2) have been prepared by surface imprinting technique with different RAFT polymerization strategies based on support matrix of SBA-15.

A mixed-function-grafted magnetic mesoporous hollow silica microsphere immobilized lipase strategy for ultrafast transesterification in a solvent-free system

A novel magnetic mesoporous hollow silica microspheres immobilized lipase is described for ultrafast transesterification of phytosterol with fatty acids and triglycerides in a solvent-free system.

High-efficiency nano/micro-reactors for protein analysis

This article reviews the recent advances regarding the development of nanomaterial-based nanoreactors and microfluidic droplet reactors and their applications in protein analysis.

Enzyme immobilization on silicate glass through simple adsorption of dendronized polymer–enzyme conjugates for localized enzymatic cascade reactions

Conjugation of enzymes to a dendronized polymer via bis-aryl hydrazone bonds enables simple and stable enzyme immobilisation on unmodified glass.

CRGO/alginate microbeads: an enzyme immobilization system and its potential application for a continuous enzymatic reaction

Hybrid bio-inorganic microbeads composed of CRGO–enzyme and alginate exhibited better stability and higher environmental tolerance, which can be used in a continuous fixed-bed enzymatic reaction.

Co-immobilization of enzymes with the help of a dendronized polymer and mesoporous silica nanoparticles

Two enzymes were immobilized in close proximity to each other using enzyme-containing mesoporous nanoparticles and a dendronized polymer–enzyme hybrid structure.

The performance of mesoporous organosilicas with phenyl groups in Heme protein immobilization

We demonstrate the influence of phenyl groups in the pore structure of mesoporous organosilicas, on the quantity of absorbed enzyme and the activity of immobilized enzyme.

Sporopollenin as an efficient green support for covalent immobilization of a lipase

Aminoalkyl functionalised sporopollenin exine capsules have been used to immobilizeCandida antarcticalipase B using a covalent diimine-based linker.

Sustainable synthesis of N-acetyllactosamine using an immobilized β-galactosidase on a tailor made porous polymer

An efficient enzymatic synthesis of N-acetyllactosamine has been developed in biosolvents, mediated by the action of an immobilized β-galactosidase on a tailor made porous polymer.

Adsorption of lysozyme on hyaluronic acid functionalized SBA-15 mesoporous silica: a possible bioadhesive depot system

Silica-based ordered mesoporous materials are very attractive matrices to prepare smart depot systems for several kinds of therapeutic agents. This work focuses on the well-known SBA-15 mesoporous silica and lysozyme, an antimicrobial protein. In order to improve the bioadhesion properties of SBA-15 particles, the effect of hyaluronic acid (HA) functionalization on lysozyme adsorption was investigated. SBA-15 samples having high (H-SBA) and low (L-SBA) levels of functionalization were analyzed during the three steps of the preparations: (1) introduction of the -NH2 groups to obtain the SBA-NH2 samples; (2) functionalization with HA to obtain the SBA-HA matrices; (3) adsorption of lysozyme. All silica matrices were characterized through N2-adsorption/desorption isotherms, small-angle X-ray scattering, transmission electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The whole of the experimental data suggests that a high level of functionalization of the silica surface allows for a negligible lysozyme adsorption mainly due to unfavorable electrostatic interactions (H-SBA-NH2) or steric hindrance (H-SBA-HA). A low degree of functionalization of the silica surface brings about a very good performance toward lysozyme adsorption, being 71% (L-SBA-NH2) and 63% (L-SBA-HA) respectively, compared to that observed for original SBA-15. Finally, two different kinetic models--a "pseudo-second order" and a "intraparticle diffusion"--were compared to fit lysozyme adsorption data, the latter being more reliable than the former.

Efficient preparation of enantiopure D-phenylalanine through asymmetric resolution using immobilized phenylalanine ammonia-lyase from Rhodotorula glutinis JN-1 in a recirculating packed-bed reactor

An efficient enzymatic process was developed to produce optically pure D-phenylalanine through asymmetric resolution of the racemic DL-phenylalanine using immobilized phenylalanine ammonia-lyase (RgPAL) from Rhodotorula glutinis JN-1. RgPAL was immobilized on a modified mesoporous silica support (MCM-41-NH-GA). The resulting MCM-41-NH-GA-RgPAL showed high activity and stability. The resolution efficiency using MCM-41-NH-GA-RgPAL in a recirculating packed-bed reactor (RPBR) was higher than that in a stirred-tank reactor. Under optimal operational conditions, the volumetric conversion rate of L-phenylalanine and the productivity of D-phenylalanine reached 96.7 mM h⁻¹ and 0.32 g L⁻¹ h⁻¹, respectively. The optical purity (eeD) of D-phenylalanine exceeded 99%. The RPBR ran continuously for 16 batches, the conversion ratio did not decrease. The reactor was scaled up 25-fold, and the productivity of D-phenylalanine (eeD>99%) in the scaled-up reactor reached 7.2 g L⁻¹ h⁻¹. These results suggest that the resolution process is an alternative method to produce highly pure D-phenylalanine.

Inorganic materials as supports for covalent enzyme immobilization: methods and mechanisms

Several inorganic materials are potentially suitable for enzymatic covalent immobilization, by means of several different techniques. Such materials must meet stringent criteria to be suitable as solid matrices: complete insolubility in water, reasonable mechanical strength and chemical resistance under the operational conditions, the capability to form manageable particles with high surface area, reactivity towards derivatizing/functionalizing agents. Non-specific protein adsorption should be always considered when planning covalent immobilization on inorganic solids. A huge mass of experimental work has shown that silica, silicates, borosilicates and aluminosilicates, alumina, titania, and other oxides, are the materials of choice when attempting enzyme immobilizations on inorganic supports. More recently, some forms of elemental carbon, silicon, and certain metals have been also proposed for certain applications. With regard to the derivatization/functionalization techniques, the use of organosilanes through silanization is undoubtedly the most studied and the most applied, although inorganic bridge formation and acylation with selected acyl halides have been deeply studied. In the present article, the most common inorganic supports for covalent immobilization of the enzymes are reviewed, with particular focus on their advantages and disadvantages in terms of enzyme loadings, operational stability, undesired adsorption, and costs. Mechanisms and methods for covalent immobilization are also discussed, focusing on the most widespread activating approaches (such as glutaraldehyde, cyanogen bromide, divinylsulfone, carbodiimides, carbonyldiimidazole, sulfonyl chlorides, chlorocarbonates, N-hydroxysuccinimides).

An ion-imprinted functionalized SBA-15 adsorbent synthesized by surface imprinting technique via reversible addition-fragmentation chain transfer polymerization for selective removal of Ce(III) from aqueous solution

A novel Ce(III) ion-imprinted polymer (Ce(III)-IIP) has been prepared by surface imprinting technique with reversible addition-fragmentation chain transfer (RAFT) polymerization based on support matrix of SBA-15. The prepared adsorbent is characterized by FT-IR, XRD, SEM, TEM, nitrogen adsorption-desorption, GPC, and TGA. The results suggest that the surface imprinted polymer synthesized by RAFT is a thin layer. For adsorption experiments, Ce(III)-IIP is investigated to remove Ce(III) by column study at different flow rates, initial metal ion concentrations, and adsorption temperature. The dynamic kinetics analyses reveal that the overall adsorption process is successfully fitted with the pseudo-first-order kinetic model and the equilibrium time was 60 min. Meanwhile, the experimental data is in good agreement with Thomas model. Ce(III)-IIP has the excellent selectivity and regenerate property. Meanwhile, the proposed method has been successfully applied in the removal of Ce(III) in natural water samples with satisfactory results. All the results suggest that Ce(III)-IIP could be used as an excellent adsorbent for efficient removal of Ce(III) from aqueous solution.

Functional materials from self-assembled bis-urea macrocycles

CONSPECTUS: This Account highlights the work from our laboratories on bis-urea macrocycles constructed from two C-shaped spacers and two urea groups. These simple molecular units assembled with high fidelity into columnar structures guided by the three-centered urea hydrogen bonding motif and aryl stacking interactions. Individual columns are aligned and closely packed together to afford functional and homogeneous microporous crystals. This approach allows for precise and rational control over the dimensions of the columnar structure simply by changing the small molecular unit. When the macrocyclic unit lacks a cavity, columnar assembly gives strong pillars. Strong pillars with external functional groups such as basic lone pairs can expand like clays to accept guests between the pillars. Macrocycles that contain sizable interior cavities assemble into porous molecular crystals with aligned, well-defined columnar pores that are accessible to gases and guests. Herein, we examine the optimal design of the macrocyclic unit that leads to columnar assembly in high fidelity and probe the feasibility of incorporating a second functional group within the macrocycles. The porous molecular crystals prepared through the self-assembly of bis-urea macrocycles display surface areas similar to zeolites but lower than MOFs. Their simple one-dimensional channels are well-suited for studying binding, investigating transport, diffusion and exchange, and monitoring the effects of encapsulation on reaction mechanism and product distribution. Guests that complement the size, shape, and polarity of the channels can be absorbed into these porous crystals with repeatable stoichiometry to form solid host-guest complexes. Heating or extraction with an organic solvent enables desorption or removal of the guest and subsequent recovery of the solid host. Further, these porous crystals can be used as containers for the selective [2 + 2] cycloadditions of small enones such as 2-cyclohexenone or 3-methyl-cyclopentenone, while larger hosts bind and facilitate the photodimerization of coumarin. When the host framework incorporates benzophenone, a triplet sensitizer, UV-irradiation in the presence of oxygen efficiently generates singlet oxygen. Complexes of this host were employed to influence the selectivity of photooxidations of 2-methyl-2-butene and cumene with singlet oxygen. Small systematic changes in the channel and bound reactants should enable systematic evaluation of the effects of channel dimensions, guest dimensions, and channel-guest interactions on the processes of absorption, diffusion, and reaction of guests within these nanochannels. Such studies could help in the development of new materials for separations, gas storage, and catalysis.

Enhanced proton conductivity of Nafion hybrid membrane under different humidities by incorporating metal-organic frameworks with high phytic acid loading

In this study, phytic acid (myo-inositol hexaphosphonic acid) was first immobilized by MIL101 via vacuum-assisted impregnation method. The obtained phytic@MIL101 was then utilized as a novel filler to incorporate into Nafion to fabricate hybrid proton exchange membrane for application in PEMFC under different relative humidities (RHs), especially under low RHs. High loading and uniform dispersion of phytic acid in MIL 101(Cr) were achieved as demonstrated by ICP, FT-IR, XPS, and EDS-mapping. The phytic@MIL101 was dispersed homogeneously in the Nafion matrix when the filler content was less than 12%. Hybrid membranes were evaluated by proton conductivity, mechanical property, thermal stability, and so forth. Remarkably, the Nafion/phytic@MIL hybrid membranes showed high proton conductivity at different RHs, especially under low RHs, which was up to 0.0608 S cm(-1) and 7.63 × 10(-4) S cm(-1) at 57.4% RH and 10.5% RH (2.8 and 11.0 times higher than that of pristine membrane), respectively. Moreover, the mechanical property of Nafion/phtic@MIL hybrid membranes was substantially enhanced and the thermal stability of membranes was well preserved.

Dry entrapment of enzymes by epoxy or polyester resins hardened on different solid supports

Embedding of enzymes was performed with epoxy or polyester resin by mixing in a dried enzyme preparation before polymerization was started. This fast and low-cost immobilization method produced enzymatically active layers on different solid supports. As model enzymes the well-characterized Thermomyces lanuginosus lipase and a new threonine aldolase from Ashbya gossypii were used. It was shown that T. lanuginosus lipase recombinantly expressed in Aspergillus oryzae is a monomeric enzyme with a molecular mass of 34kDa, while A. gossypii threonine aldolase expressed in Escherichia coli is a pyridoxal-5'-phosphate binding homotetramer with a mass of 180kDa. The enzymes were used freeze dried, in four different preparations: freely diffusing, adsorbed on octyl sepharose, as well as cross-linked enzyme aggregates or as suspensions in organic solvent. They were mixed with standard two-component resins and prepared as layers on solid supports made of different materials e.g. metal, glass, polyester. Polymerization led to encapsulated enzyme preparations showing activities comparable to literature values.

Facile synthesis of mesoporous silica and titania supraparticles by a meniscus templating route on a superhydrophobic surface and their application to adsorbents

Mesoporous silica and titania supraparticles with controllable pore size, particle size, and macroscopic morphology were readily synthesized by a novel synthetic pathway using meniscus templating on a superhydrophobic surface, which is much simpler than well-known emulsion systems. Moreover, we first report that despite the very large radius of droplet curvature on a millimeter scale, supraparticles kept the round cap morphology due to addition of sucrose as a shape preserver as well as a pore-forming agent. In addition, mesoporous silica and titania supraparticles provided good adsorption performance for Acid Blue 25 and Cr(VI), and were easily separated from the solution by using a scoop net after adsorption tests.