Recent advances in ruthenium-based olefin metathesis

Testing enabling techniques for olefin metathesis reactions of lipophilic substrates in water as a diluent

Olefin metathesis reactions of diverse polyfunctional substrates were conducted in water emulsions using two hydrophobic ruthenium catalysts in the presence of air. Instead of using surfactants to increase the efficiency of the metathesis reaction in water, ultrasound and microwave techniques were tested on a small-scale reaction, whereas conventional heating and mechanical stirring were effective enough to provide high conversion and selectivity on a larger scale. The developed conditions extend known protocols for the aqueous metathesis methodology, utilizing relatively low catalyst loadings and allowing for simple product isolation and purification. The established synthetic protocol was successfully adopted in the large-scale synthesis of a pharmaceutically related product – sildenafil (Viagra) derivative.

•

Sustainable approach for metathesis reaction in water emulsion system on air.

•

Utilization of enabling techniques for boosting metathesis under aqueous conditions.

•

RCM of medically important sildenafil derivative.

Ring-Opening Carbonyl-Olefin Metathesis of Cyclobutenes

The ring-opening carbonyl-olefin metathesis of cyclobutenes to furnish γ,δ-unsaturated aldehydes-formal Claisen rearrangement products-is reported. The bistrifluoroacetic acid salt of 2,3-diazabicyclo[2.2.2]octane promotes these reactions efficiently with a variety of cyclobutenes and aldehydes, including aliphatic, α,β-unsaturated, aryl, and heteroaryl aldehydes. Catalytic reactions are also demonstrated.

Olefin-Surface Interactions: A Key Activity Parameter in Silica-Supported Olefin Metathesis Catalysts

Molecularly defined and classical heterogeneous Mo-based metathesis catalysts are shown to display distinct and unexpected reactivity patterns for the metathesis of long-chain α-olefins at low temperatures (<100 °C). Catalysts based on supported Mo oxo species, whether prepared via wet impregnation or surface organometallic chemistry (SOMC), exhibit strong activity dependencies on the α-olefin chain length, with slower reaction rates for longer substrate chain lengths. In contrast, molecular and supported Mo alkylidenes are highly active and do not display such dramatic dependence on the chain length. State-of-the-art two-dimensional (2D) solid-state nuclear magnetic resonance (NMR) spectroscopy analyses of postmetathesis catalysts, complemented by Fourier transform infrared (FT-IR) spectroscopy and molecular dynamics calculations, evidence that the activity decrease observed for supported Mo oxo catalysts relates to the strong adsorption of internal olefin metathesis products because of interactions with surface Si-OH groups. Overall, this study shows that in addition to the nature and the number of active sites, the metathesis rates and the overall catalytic performance depend on product desorption, even in the liquid phase with nonpolar substrates. This study further highlights the role of the support and active site composition and dynamics on activity as well as the need for considering adsorption in catalyst design.

Metal-Catalyzed Organic Reactions by Resonant Acoustic Mixing

We demonstrate catalytic organic synthesis by Resonant Acoustic Mixing (RAM): a mechanochemical methodology that does not require bulk solvent or milling media. Using as model reactions ruthenium-catalyzed ring-closing metathesis and copper-catalyzed sulfonamide-isocyanate coupling, RAM mechanosynthesis is shown to be faster, operationally simpler than conventional ball-milling, while also providing the first example of a mechanochemical strategy for ruthenium-catalyzed ene-yne metathesis. Reactions by RAM are readily and directly scaled-up without any significant changes in reaction conditions, as shown by the straightforward 200-fold scaling-up of the synthesis of the antidiabetic drug Tolbutamide, from hundreds of milligrams directly to 30 grams.

Cobalt-N-Heterocyclic Carbene Complexes in Catalysis

Cobalt-NHC complexes have emerged as an attractive class of 3d transition metal catalysts for a broad range of chemical processes, including cross-coupling, hydrogenation, hydrofunctionalization and cycloaddition reactions. Herein, we present a comprehensive review of catalytic methods utilizing cobalt-NHC complexes with a focus on catalyst structure, the role of the NHC ligand, properties of the catalytic system, mechanism and synthetic utility. The survey clearly suggests that the recent emergence of well-defined cobalt-NHC catalysts may have a tremendous utility in the design and application of catalytic reactions using more abundant 3d transition metals.

Olefin Metathesis Catalyzed by a Hoveyda-Grubbs-like Complex Chelated to Bis(2-mercaptoimidazolyl) Methane: A Predictive DFT Study

Although highly selective complexes for the cross-metathesis of olefins, particularly oriented toward the productive metathesis of Z-olefins, have been reported in recent years, there is a constant need to design and prepare new and improved catalysts for this challenging reaction. In this work, guided by density functional theory (DFT) calculations, the performance of a Ru-based catalyst chelated to a sulfurated pincer in the olefin metathesis was computationally assessed. The catalyst was designed based on the Hoveyda–Grubbs catalyst (SIMes)Cl₂Ru(=CH–o–OiPrC₆H₄) through the substitution of chlorides with the chelator bis(2-mercaptoimidazolyl)methane. The obtained thermodynamic and kinetic data of the initiation phase through side- and bottom-bound mechanisms suggest that this system is a versatile catalyst for olefin metathesis, as DFT predicts the highest energy barrier of the catalytic cycle of ca. 20 kcal/mol, which is comparable to those corresponding to the Hoveyda–Grubbs-type catalysts. Moreover, in terms of the stereoselectivity evaluated through the propagation phase in the metathesis of propene–propene to 2-butene, our study reveals that the Z isomer can be formed under a kinetic control. We believe that this is an interesting outcome in the context of future exploration of Ru-based catalysts with sulfurated chelates in the search for high stereoselectivity in selected reactions.

PhIO-Mediated Oxidative C═C Bond Cleavage and Reassembly toward Highly Functionalized Oxazolones

An efficient PhIO-mediated oxidative C═C bond cleavage and reassembly of enaminone toward oxazolone with high regioselectivity has been reported. DFT calculations revealed that the reaction proceeded through an oxygen atom transfer, C═C bond cleavage, alkylthio migration, and reassembly cascade. This strategy is highlighted by high atom and step economy with formation of five bonds in one pot and generation of a high-valued oxazolone skeleton under mild conditions.

Closing the "One Monomer-Two Polymers-One Monomer" Loop via Orthogonal (De)polymerization of a Lactone/Olefin Hybrid

Two well-known low-ceiling-temperature (LCT) monomers, γ-butyrolactone (γ-BL) toward ring-opening polymerization (ROP) to polyester and cyclohexene toward ring-opening metathesis polymerization (ROMP) to poly(cyclic olefin), are notoriously "nonpolymerizable". Here we present a strategy to render not only polymerizability of both the γ-BL and cyclohexene sites, orthogonally, but also complete and orthogonal depolymerization, through creating an LCT/LCT hybrid, bicyclic lactone/olefin (BiL⁼). This hybrid monomer undergoes orthogonal polymerization between ROP and ROMP, depending on the catalyst employed, affording two totally different classes of polymeric materials from this single monomer: polyester P(BiL⁼)_ROP via ROP and functionalized poly(cyclic olefin) P(BiL⁼)_ROMP via ROMP. Intriguingly, both P(BiL⁼)_ROP and P(BiL⁼)_ROMP are thermally robust but chemically recyclable under mild conditions (25-40 °C), in the presence of a catalyst, to recover cleanly the same monomer via chain unzipping and scission, respectively. In the ROP, topological and stereochemical controls have been achieved and the structures characterized. Furthermore, the intact functional group during the orthogonal polymerization (i.e., the double bond in ROP and the lactone in ROMP) is utilized for postfunctionalization for tuning materials' thermal and mechanical performances. The impressive depolymerization orthogonality further endows selective depolymerization of both the ROP/ROMP copolymer and the physical blend composites into the same starting monomer.

Photons or Electrons? A Critical Comparison of Electrochemistry and Photoredox Catalysis for Organic Synthesis

Redox processes are at the heart of synthetic methods that rely on either electrochemistry or photoredox catalysis, but how do electrochemistry and photoredox catalysis compare? Both approaches provide access to high energy intermediates (e.g., radicals) that enable bond formations not constrained by the rules of ionic or 2 electron (e) mechanisms. Instead, they enable 1e mechanisms capable of bypassing electronic or steric limitations and protecting group requirements, thus enabling synthetic chemists to disconnect molecules in new and different ways. However, while providing access to similar intermediates, electrochemistry and photoredox catalysis differ in several physical chemistry principles. Understanding those differences can be key to designing new transformations and forging new bond disconnections. This review aims to highlight these differences and similarities between electrochemistry and photoredox catalysis by comparing their underlying physical chemistry principles and describing their impact on electrochemical and photochemical methods.

Ring-Expansion Metathesis Polymerization Initiator Design for the Synthesis of Cyclic Polymers

Cyclic polymers are of increasing interest to the synthetic and physical polymer communities due to their unique structures that lack chain ends. This topological distinction results in decreased chain entanglement, lower intrinsic viscosity, and smaller hydrodynamic radii. Many methods for the production of cyclic polymers exist, however, large-scale production of architecturally pure cyclic polymers is challenging. Ring-expansion metathesis polymerization (REMP) is an increasingly promising method to produce cyclic polymers because of the mild and scalable reaction conditions. Herein, a brief history of REMP for the synthesis of cyclic polymers with both ruthenium and non-ruthenium initiators is discussed. Even though REMP is a promising method for synthesizing cyclic polymers, state-of-the-art methods still struggle with poor molar mass control, slow polymerization rates, low conversion, and poor initiator stability. To combat these challenges, our group has developed a tethered ruthenium-benzylidene initiator, CB6, which utilizes design features from ubiquitous Grubbs-type initiators used in linear polymerizations. These structural modifications are shown to improve initiator kinetics, enhance initiator stability, and increase control over the molar mass of the resulting cyclic polymers.

1 Introduction

2 Ring-Expansion Metathesis Polymerization (REMP) with Ruthenium Initiators

3 New Developments in Ruthenium Ring-Expansion Metathesis (REMP) Initiator Design

4 Ring-Expansion Metathesis Polymerization (REMP) with Non-Ruthenium Initiators

5 Conclusions

An Iterative Phosphate Tether Mediated Approach for the Synthesis of Complex Polyol Subunits

A pot-economical approach to advanced polyol subunits is reported. The key reactions involved are iterative use of a phosphate tether-mediated one-pot sequential RCM/CM/H2 with subsequent utilization of either a regio-/diasteroselective cuprate addition or a Pd-catalyzed reductive allylic transposition. This method highlights the asymmetric synthesis of 12 complex polyol subunits in 4-6 one-pot sequential operations with a total of 12-14 reactions, of which 4-5 are catalytic, with minimal workup and purification procedures.

A simple, efficient route to modify the properties of epoxy dynamic polymer networks

A simple and efficient strategy to modify epoxy dynamic polymer networks (DPNs) is presented. The introduction of the flexible epoxidized form of naturally occurring soybean oil (ESO) into epoxy DPNs markedly improves their mechanical properties, stress relaxation rate and malleability. Specifically, at 7.5 wt% ESO loading, the elongation at break of the as-produced epoxy-ESO DPNs was increased from 10% to 108%, the stress relaxation time decreased from 6100 s to 2570 s at 120 °C, and the reprocessing temperature was reduced by 26 °C, which is advantageous for expanding the scope of applications of these materials, especially for reducing the energy consumption during reprocessing. At this composition, the epoxy-ESO DPNs also showed excellent self-healing, welding and chemical degradation properties. This work provides a novel pathway to fabricate epoxy-based DPNs with high performance in an energy-conserving manner.

Ruthenium-Catalyzed Diazoacetates/Cyclooctene Metathesis Copolymerization

As a powerful synthetic tool, ruthenium-catalyzed ring-opening metathesis polymerization (ROMP) has been widely utilized to prepare diverse polymers. In this contribution, we demonstrated the polymerization of cyclooctene in the presence...

Tuning metathesis performance of molybdenum oxide-based catalyst by silica support acidity modulation and high temperature pretreatment

Molybdenum oxide-based catalysts containing 5 wt. % of Mo obtained by simple impregnation of silica mesoporous support were studied in olefin metathesis reaction at 50 °C. Effect of support modification...

Mechanochemical ring-opening metathesis polymerization: development, scope, and mechano-exclusive polymer synthesis

Ruthenium-alkylidene initiated ring-opening metathesis polymerization has been realized under solid-state conditions by employing a mechanochemical ball milling method. This method promotes greenness and broadens the scope to include mechano-exclusive products. The carbene- and pyridine-based Grubbs 3^rd-generation complex outperformed other catalysts and maintained similar mechanistic features of solution-phase reactions. High-speed ball milling provides sufficient mixing and energy to the solid reaction mixture, which is composed of an initiator and monomers, to minimize or eliminate the use of solvents. Therefore, the solubility and miscibility of monomers and Ru-initiators are not limiting factors in solid-state ball milling. A wide variety of solid monomers, including ionomers, fluorous monomers, and macromonomers, were successfully polymerized under ball milling conditions. Importantly, direct copolymerization of immiscible (ionic/hydrophobic) monomers exemplifies the synthesis of mechano-exclusive polymers that are difficult to make using traditional solution procedures. Finally, the addition of a small amount of a liquid additive (i.e., liquid-assisted grinding) minimized chain-degradation, enabling high-molecular-weight polymer synthesis.

Mechanochemical ball-milling ring-opening metathesis polymerization minimized solvent use and produced previously inaccessible polymers in solution.

Steric and electronic effects in latent S-chelated olefin metathesis catalysts

In this work, the structure, latency, and activity of twelve sulfur-chelated ruthenium precatalysts were studied by systematically varying their ligand shell.

Encapsulation of the Hoveyda–Grubbs 2nd generation catalyst in magnetically separable alginate/mesoporous carbon beads for olefin metathesis reactions in water

A magnetically separable catalyst is developed through encapsulation of mesoporous carbon, HG2 and γ-Fe2O3 within alginate gels. The catalytic showed superior performance in metathesis reactions of hydrophobic olefins in water under air atmosphere.

Olefin Metathesis in Confined Spaces: The Encapsulation of Hoveyda-Grubbs Catalyst in Peanut, Square, and Capsule Shaped Hollow Silica Gels

In this study, Hoveyda-Grubbs 2nd generation (HG2) catalyst was encapsulated in hollow mesoporous silica gels with various morphologies (peanut, square, and capsule) by reducing the pore size of the mesoporous...

Highly selective ethenolysis with acyclic-aminooxycarbene ruthenium catalysts

Acyclic carbene–ruthenium catalysts were developed for the ethenolysis. Remarkable catalytic efficiency (turnover numbers of 100 000) and excellent α-olefin selectivity (up to 98%) were exhibited.

Introduction of Triptycene with a Particular Substitution Pattern into Polymer Chains Can Dramatically Improve the Structural and Rheological Properties

Although a large number of polymers that contain triptycene units in the main chains have been developed, no polymer design using 1,8-substituted triptycene has been reported to date. In this study, we investigated the properties of linear homo- and copolymers obtained by ring-opening polymerization of a triptycene monomer bearing a macrocyclic olefin linked at its 1,8-position and its copolymerization with cyclooctene, respectively. We found that the introduction of triptycene with this substitution pattern leads to nanoscale molecular ordering, thereby greatly improving the physical properties of the polymers. The key to this remarkable behavior of 1,8-substituted triptycene-containing polymers is the formation of a particular two-dimensional assembly of the triptycene units by nested hexagonal packing, which aligns one-dimensionally while folding the polymer chains into a well-defined layered structure. The polymer design using 1,8-substituted triptycene can be applied to other polymers, unless their main chain contains functional groups capable of a strong intermolecular interaction such as hydrogen bonding.

One-Pot Heterotelechelic Metathesis Polymers via Regioselective Chain Transfer Agents

Single chain transfer agents are used to synthesize narrowly distributed heterotelechelic ROMP polymers in one pot, exploiting a new mechanistic and synthetic approach. The chain transfer agents carrying different functional groups are synthesized in a few straightforward steps. Prefunctionalization of commercially available Grubbs' third-generation catalyst is realized in situ using regioselective chain transfer agents within a short reaction period. After monomer consumption, the excess chain transfer agent in the reaction medium automatically end-functionalizes the polymer chain, yielding a heterotelechelic polymer via a ring-opening-ring-closing sequence. ¹H NMR, MALDI-ToF, and SEC analyses confirmed end-group functionalization as well as excellent control over molecular weight and dispersity. This strategy highlights a new way of synthesizing one-pot heterotelechelic ROMP polymers straightforwardly and efficiently.

Highly Active Cross-Metathesis of Tetrafluoroethylene with a Seven-Membered N-Heterocyclic-Carbene-Ruthenium Catalyst

A drastic increase in catalyst turnover number (TON) was accomplished in the cross-metathesis of tetrafluoroethylene (TFE) and vinyl ethers. Under a continuous flow of TFE, catalyst Ru7, which contains a seven-membered N-heterocyclic carbene (NHC) ligand, reached a TON of 4100; this is 2 orders of magnitude higher than the highest hitherto reported value. Mechanistic studies revealed that the expanded NHC successfully destabilizes the stable intermediates with a difluorocarbene structure, which strongly promotes the reaction.

Himic Anhydride: A Retro Diels-Alder Reaction for the Organic Laboratory and an Accompanying NMR Study

The thermal equilibration of himic anhydride [IUPAC (2-endo,3-endo)-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid anhydride] to (2-exo,3-exo)-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid anhydride and subsequent recrystallization of the exo-product can be performed as a standard undergraduate laboratory experiment requiring minimal equipment. The interpretation of the ¹H NMR spectra for these norbornene carboxylic anhydride molecules promotes an appreciation of constrained ring systems and factors that affect chemical shifts and coupling constants.