3D-3D topotactic transformation in aluminophosphate molecular sieves and its implication in new zeolite structure generation

Zeolites have unique pore structures of molecular dimensions and tunable compositions, making them ideal for shape selective catalysis and separation. However, targeted synthesis of zeolites with new pore structures and compositions remains a key challenge. Here, we propose an approach based on a unique 3D-3D topotactic transformation, which takes advantage of weak bonding in zeolites. This is inspired by the structure transformation of PST-5, a new aluminophosphate molecular sieve, to PST-6 by calcination. The structure of nano-sized PST-5 crystals is determined by 3D electron diffraction. We find that the 3D-3D topotactic transformation involves two types of building units where penta- or hexa-coordinated Al is present. We apply this approach to several other zeolite systems and predict a series of new zeolite structures that would be synthetically feasible. This method provides a concept for the synthesis of targeted zeolites, especially those which may not be feasible by conventional methods.

CO2 -Enabled Biomass Fractionation/Depolymerization: A Highly Versatile Pre-Step for Downstream Processing

Lignocellulosic biomass is inevitably subject to fractionation and depolymerization processes for enhanced selectivity toward specific products, in most cases prior to catalytic upgrading of the three main fractions-cellulose, hemicellulose, and lignin. Among the developed pretreatment techniques, CO₂ -assisted biomass processing exhibits some unique advantages such as the lowest critical temperature (31.0 °C) with moderate critical pressure, low cost, nontoxicity, nonflammability, ready availability, and the addition of acidity, alongside easy recovery by pressure release. This Review showcases progress in the study of sub- or supercritical CO₂ -mediated thermal processing of lignocellulosic biomass-the key pre-step for downstream conversion processes. The auxo-action of CO₂ in biomass pretreatment and fractionation, along with the involved variables, direct degradation of untreated biomass in CO₂ by gasification, pyrolysis, and liquefaction with relevant conversion mechanisms, and CO₂ -enabled depolymerization of lignocellulosic fractions with representative reaction pathways are summarized. Moreover, future prospects for the practical application of CO₂ -assisted up- and downstream biomass-to-bioproduct conversion are also briefly discussed.

Quantum-Sized Zinc Oxide Nanoparticles Synthesised within Mesoporous Silica (SBA-11) by Humid Thermal Decomposition of Zinc Acetate

A modified facile method is presented to synthesise quantum-sized zinc oxide nanoparticles within the pores of a mesoporous silica host (SBA-11). This method eliminates the 3 h alcohol reflux and the basic solution reaction steps of zinc acetate. The mesoporous structure and the ZnO nanoparticles were analysed by X-ray diffractometry, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, nitrogen sorption analysis and UV–VIS spectroscopy. These tests confirm the synthesis of ~1 nm sized ZnO within the pores of SBA-11 and that the porous structure remained intact after ZnO synthesis.

Morphology-transport relationships for SBA-15 and KIT-6 ordered mesoporous silicas

Quantitative morphology-transport relationships are derived for ordered mesoporous silicas through direct numerical simulation of hindered diffusion in realistic geometrical models of the pore space obtained from physical reconstruction by electron tomography. We monitor accessible porosity and effective diffusion coefficients resulting from steric and hydrodynamic interactions between passive tracers and the pore space confinement as a function of λ = d_tracer/d_meso (ratio of tracer diameter to mean mesopore diameter) in SBA-15 (d_meso = 9.1 nm) and KIT-6 (d_meso = 10.5 nm) silica samples. For λ = 0, the pointlike tracers reproduce the true diffusive tortuosities. For 0 ≤λ < 0.5, the derived hindrance factor quantifies the extent to which diffusion of finite-size tracers through the materials is hindered compared with free diffusion in the bulk liquid. The hindrance factor connects the transport properties of the ordered silicas to their mesopore space morphologies and enables quantitative comparison with random mesoporous silicas. Key feature of the ordered silicas is a narrow, symmetric mesopore size distribution (∼10% relative standard deviation), which engenders a sharper decline of the accessible-porosity window with increasing λ than observed for random silicas with their wide, asymmetric mesopore size distributions. As support structures, ordered mesoporous silicas should offer benefits for applications where spatial confinement effects and molecular size-selectivity are of prime importance. On the other hand, random mesoporous silicas enable higher diffusivities for λ > 0.3, because the larger pores carry most of the diffusive flux and keep pathways open when smaller pores have closed off.

Heterogeneous Catalyst Design Principles for the Conversion of Lignin into High-Value Commodity Fuels and Chemicals

Lignin valorization has risen as a promising pathway to supplant the use of petrochemicals for chemical commodities and fuels. However, the challenges of separating and breaking down lignin from lignocellulosic biomass are the primary barriers to success. Integrated biorefinery systems that incorporate both homo- and heterogeneous catalysis for the upgrading of lignin intermediates have emerged as a viable solution. Homogeneous catalysis can perform selected chemistries, such as the hydrolysis and dehydration of ester or ether bonds, that are more suitable for the pretreatment and fractionation of biomass. Heterogeneous catalysis, however, offers a tunable platform for the conversion of extracted lignin into chemicals, fuels, and materials. Tremendous effort has been invested in elucidating the necessary factors for the valorization of lignin by using heterogeneous catalysts, with efforts to explore more robust methods to drive down costs. Current progress in lignin conversion has fostered numerous advances, but understanding the key catalyst design principles is important for advancing the field. This Minireview aims to provide a summary on the fundamental design principles for the selective conversion of lignin by using heterogeneous catalysts, including the pairing of catalyst metals, supports, and solvents. The review puts a particular focus on the use of bimetallic catalysts on porous supports as a strategy for the selective conversion of lignin. Finally, future research on the valorization of lignin is proposed on the basis of recent progress.

Enhanced catalytic reaction at an air-liquid-solid triphase interface

Gaseous reactant involved heterogeneous catalysis is critical to the development of clean energy, environmental management, health monitoring, and chemical synthesis. However, in traditional heterogeneous catalysis with liquid–solid diphase reaction interfaces, the low solubility and slow transport of gaseous reactants strongly restrict the reaction efficiency. In this minireview, we summarize recent advances in tackling these drawbacks by designing catalytic systems with an air–liquid–solid triphase joint interface. At the triphase interface, abundant gaseous reactants can directly transport from the air phase to the reaction centre to overcome the limitations of low solubility and slow transport of the dissolved gas in liquid–solid diphase reaction systems. By constructing a triphase interface, the efficiency and/or selectivity of photocatalytic reactions, enzymatic reactions, and (photo)electrochemical reactions with consumption of gaseous reactants oxygen, carbon dioxide, and nitrogen are significantly improved.

Gaseous reactant involved liquid–solid diphase interface reactions can be significantly enhanced using rationally designed and constructed air–liquid–solid triphase systems.

Metal organic frameworks for biomass conversion

This review narrates the recent developments on the catalytic applications of pristine metal–organic frameworks (MOFs), functionalized MOFs, guests embedded over MOFs and MOFs derived carbon composites for biomass conversion into platform chemicals.

Advances in catalytic production processes of biomass-derived vinyl monomers

This review provides a summary and perspective for three bio-derived vinyl monomers – acrylic acid, methacrylic acid and styrene.

A smart use of biomass derivatives to template an ad hoc hierarchical SAPO-5 acid catalyst

A smart design of hierarchical SAPO-5 acid catalyst using biomass derived monosaccharides as sustainable and low-cost mesoporogens has been developed. The hierarchical SAPO-5 was characterized by several physico-chemical techniques to elucidate structure–properties relationships and was tested as a catalyst in the MW-assisted glucose transformation in 5-HMF using γ-valerolactone (GVL) as green solvent.

Hierarchical SAPO-5 catalyst was synthesised using biomass-derived sugars as sustainable mesoporogens and tested in the conversion of glucose into 5-(hydroxymethyl)furfural.

A TiO2/Nb2O5·nH2O heterojunction catalyst for conversion of glucose into 5-hydroxymethylfurfural in water

A series of water-tolerant Lewis acidic TiO₂/Nb₂O₅·nH₂O heterojunction catalysts with different Ti : Nb ratios have been prepared and investigated in the conversion of glucose into HMF in water.

Synthesis and Characterisation of Nano-Biosorbents and Their Applications for Waste Water Treatment

Nanotechnology is one of the most reliable techniques for the remediation of heavy metals. As nanoparticles have a higher surface area to volume, ratio, and high surface energies, so nano-based absorbents are very efficient. Adsorption technique is the most preferred for the remediation of wastewater pollutants. In the current study, a comparative study was done between bio sorbents, nanosorbents and bio nanosorbents. The chapter studies with the synthesis and characterization of the bio sorbents, bionanosorbents, their mechanism of sorption, their synthesis, in addition, application for the remediation of heavy metals from wastewater. The fly ash is an industrial byproduct. Biosorbents have immense applications in the field of bioremediation of heavy metals. Further, their components have also enhanced removal efficiency from the wastewater.

Tin oxide-coated transition metal oxide molecular wires for biomass conversion

Herein, acid catalysts were prepared by coating Sn oxide on molecular wires for the production of levulinic acid from cellulose.

Biomolecule-Mediated Generation of Ru Nanocatalyst for Sustainable Reduction of Nitrobenzene

A mild and sustainable synthetic route was followed for the generation of biomolecule-assisted Ru nanocatalyst under open as well as inert atmosphere using the polyphenol morin. The nanocatalyst was characterized thoroughly by powder X-ray diffraction, N₂ adsorption-desorption, high-resolution transmission electron microscopy, dynamic light scattering, X-ray photoelectron spectroscopy, absorption spectroscopy, Fourier transform infrared spectroscopy, fluorescence spectroscopy, thermogravimetric analysis, and inductively coupled plasma optical emission spectrometry. The nanocatalyst reveals excellent catalytic activity for the reduction of several substituted nitrobenzene to aniline derivatives under simple, mild, and environment-friendly conditions. The catalyst can be reused for four consecutive cycles without significant loss in its catalytic activity.

A Flexible Portable Glucose Sensor Based on Hierarchical Arrays of Au@Cu(OH)2 Nanograss

Flexible physiological medical devices have gradually spread to the lives of people, especially the elderly. Here, a flexible integrated sensor based on Au nanoparticle modified copper hydroxide nanograss arrays on flexible carbon fiber cloth (Au@Cu(OH)2/CFC) is fabricated by a facile electrochemical method. The sensor possesses ultrahigh sensitivity of 7.35 mA mM-1 cm-2 in the linear concentration range of 0.10 to 3.30 mM and an ultralow detection limit down to 26.97 nM. The fantastic sensing properties can be ascribed to the collective effect of the superior electrochemical catalytic activity of nanograss arrays with dramatically enhanced electrochemically active surface area as well as mass transfer ability when modified with Au and intimate contact between the active material (Au@Cu(OH)2) and current collector (CFC), concurrently supplying good conductivity for electron/ion transport during glucose biosensing. Furthermore, the device also exhibits excellent anti-interference and stability for glucose detection. Owing to the distinguished performances, the novel sensor shows extreme reliability for practical glucose testing in human serum and juice samples. Significantly, these unique properties and the soft structure of silk fabric can provide a promising structure design for a flexible micro-device and a great potential material candidate of electrochemical glucose sensor.

Monodisperse nanoparticles for catalysis and nanomedicine

The growth and breadth of nanoparticle (NP) research now encompasses many scientific and technologic fields, which has driven the want to control NP dimensions, structures and properties. Recent advances in NP synthesis, especially in solution phase synthesis, and characterization have made it possible to tune NP sizes and shapes to optimize NP properties for various applications. In this review, we summarize the general concepts of using solution phase chemistry to control NP nucleation and growth for the formation of monodisperse NPs with polyhedral, cubic, octahedral, rod, or wire shapes and complex multicomponent heterostructures. Using some representative examples, we demonstrate how to use these monodisperse NPs to tune and optimize NP catalysis of some important energy conversion reactions, such as the oxygen reduction reaction, electrochemical carbon dioxide reduction, and cascade dehydrogenation/hydrogenation for the formation of functional organic compounds under greener chemical reaction conditions. Monodisperse NPs with controlled surface chemistry, morphologies and magnetic properties also show great potential for use in biomedicine. We highlight how monodisperse iron oxide NPs are made biocompatible and target-specific for biomedical imaging, sensing and therapeutic applications. We intend to provide readers some concrete evidence that monodisperse NPs have been established to serve as successful model systems for understanding structure-property relationships at the nanoscale and further to show great potential for advanced nanotechnological applications.

Efficient Transfer Hydrogenation of Nitro Compounds to Amines Enabled by Mesoporous N-Stabilized Co-Zn/C

N-doped metal materials with enhanced stability and abundant porosity have attracted tremendous attention in catalytic reactions. Herein, a simple solvothermal approach was demonstrated to significantly enlarge the pore dimension of conventional microporous zeolitic imidazolate framework (ZIF) incorporated with two kinds of central metals (Co, Zn), while maintaining the original ZIF crystal morphology. Upon further pyrolysis, the resulting mesoporous Co-Zn/N-C material could possess the highly dispersed metal particle on the N-doped carbon, with satisfactory pore volume and surface area. The partial vaporization of Zn and the stabilizing effect of N, illustrated by XRD, HRTEM, HAADF-STEM with mapping, SEM, Raman Spectrum, BET, and TGA, were able to remarkably increase the accessibility of substrate toward active sites and prevent the aggregation of metal particles, respectively. Under mild reaction conditions, the N-stabilized Co-Zn/N-C exhibited good activity and selectivity in transfer hydrogenation of various nitro compounds to corresponding amines, where a synergistic role among Co, Zn, and N was responsible for its superior performance to other tested catalysts. In addition, the N-doped non-noble metal/carbon heterogeneous catalyst was fairly stable and could be reused several times without obvious deactivation.

Peroxide-periodate co-modification of carboxymethylcellulose to prepare polysaccharide-based tanning agent with high solid content

Dialdehyde carboxymethylcellulose (DCMC) solution generally has quite low solid content, which inevitably limits its industrial application. In this work, carboxymethylcellulose sodium (Na-CMC) was pre-degraded using H₂O₂ followed by periodate oxidation for preparing DCMC with high solid content as practical tanning agent. Pre-degradation conditions optimization showed that H₂O₂ dosage most impacted the tanning effect of DCMC, and the M_w and viscosity of Na-CMC underwent remarkable reduction. FT-IR and ¹H NMR illustrated that aldehyde group was successfully introduced into DCMC after periodate oxidation. Under the optimized conditions, the solid content of DCMC could be improved to around 30%. This DCMC could endow tanned leather with high shrinkage temperature and satisfactory fiber dispersion. Besides, DCMC tanned leather had comparable physical and organoleptic properties to those of leathers tanned by chrome tanning agent and commercial polyaldehyde tanning agent TWT. This suggests the prospect of DCMC with high solid content as useful tanning agent.

α-Fe2O3 hollow meso-microspheres grown on graphene sheets function as a promising counter electrode in dye-sensitized solar cells

Although nanoparticles, nanorods, and nanosheets of α-Fe₂O₃ on graphene sheets have been synthesized, it remains a challenge to grow 3D α-Fe₂O₃ nanomaterials with more sophisticated compositions and structures on the graphene sheets. Herein, we demonstrate a facile solvothermal route under controlled conditions to successfully fabricate 3D α-Fe₂O₃ hollow meso–microspheres on the graphene sheets (α-Fe₂O₃/RGO HMM). Attributed to the combination of the catalytic features of α-Fe₂O₃ hollow meso–microspheres and the high conductivity of graphene, α-Fe₂O₃/RGO HMM exhibited promising electrocatalytic performance as a counter electrode in dye-sensitized solar cells (DSSCs). The DSSCs fabricated with α-Fe₂O₃ HMM displayed high power conversion efficiency of 7.28%, which is comparable with that of Pt (7.71%).

Although nanoparticles, nanorods, and nanosheets of α-Fe₂O₃ on graphene sheets have been synthesized, it remains a challenge to grow 3D α-Fe₂O₃ nanomaterials with more sophisticated compositions and structures on the graphene sheets.

Efficient Catalytic Upgradation of Bio-Based Furfuryl Alcohol to Ethyl Levulinate Using Mesoporous Acidic MIL-101(Cr)

Enlarging the dispersed micropores of metal-organic frameworks to the well-ordered mesostructure can enhance the accessibility of acidic sites for reactants resulting in the improvement of selectivity. With the regulation of cetyltrimethylammonium bromide/Cr³⁺ and ClSO₃H sulfonation, a series of mesoporous MIL-101(Cr)-SO₃H (MMSs) with multiple pore sizes and acidic properties were synthesized and explored to further facilitate the furfuryl alcohol (FA) ethanolization to ethyl levulinate (EL) for the first time. The optimal catalytic activity of 83.8% EL yield at full FA conversion demonstrated that the appropriate mesopore size, acidic density, and accessible -SO₃H sites contributed to the superior performance of the MMS(0.3)-0.15. The turnover frequency value (14.8 h^-1) obtained with MMS(0.3)-0.15 was comparable to the commercial Nafion NR50 (18.3 h^-1) and much higher than the classical Amberlyst-15 (1.9 h^-1), confirming the predominant catalytic performance. Furthermore, two coexistent reaction paths with 2-ethoxymethylfuran and 4,5,5-triethoxy-pentan-2-one as intermediates indicated the possibility of producing EL from FA.

Synthesis of Fuel Grade Molecules from Hydroprocessing of Biomass-Derived Compounds Catalyzed by Magnetic Fe(NiFe)O4-SiO2 Nanoparticles

The development of promising magnetic nanocatalysts is one of the key research topics in the field of catalysis. This is because of their versatile surface physicochemical, magnetic, and size-dependent catalytic properties. Herein, an optimization strategy for the synthesis of high-value fuel grade chemicals from hydro-deoxygenation of biomass-derived furfural and vanillin using a nanostructured magnetic Fe(NiFe)O4-SiO2 catalyst, synthesized by a facile one-pot procedure, was presented. Accordingly, effects of calcination temperature from 400, 500, 600 to 700 °C on the structure-activity properties of the magnetic Fe(NiFe)O4-SiO2 catalyst was systematically studied. The magnetic Fe(NiFe)O4-SiO2 catalyst calcined at 500 °C exhibited the best catalytic performance, giving full conversions of vanillin and furfural, with good selectivity of 63 and 59% to cyclohexane and n-pentane (fuel grade chemicals), respectively. The prowess of this catalyst was attributed to its abundant acid properties in addendum to high BET surface area.

Impact of Char Properties and Reaction Parameters on Naphthalene Conversion in a Macro-TGA Fixed Char Bed Reactor

Catalytic tar removal is one of the main challenges restricting the successful commercialization of biomass gasification. Hot gas cleaning using a heterogeneous catalyst is one of the methods used to remove tar. In order to economically remove tar, an efficient low-cost catalyst should be applied. Biomass char has the potential to be such a catalyst. In this work, the reactor parameters that affect the conversion of a model tar component “naphthalene” were investigated employing an in situ thermogravimetric analysis of a fixed bed of biomass char. The following reactor and catalyst parameters were investigated: bed temperature (750 to 900 °C), gas residence time in the char bed (0.4 to 2.4 s), char particle size (500 to 1700 μm), feed naphthalene concentration, feed gas composition (CO, CO2, H2O, H2, CH4, naphthalene, and N2), char properties, and char precursor. It was found that the biomass char has a high activity for naphthalene conversion. However, the catalytic performance of the biomass char was affected by the gasification reactions that consumed its carbon, and the coke deposition that reduced its activity. Furthermore, high ash and iron contents enhanced char activity. The results of this work will be used in the design of a process that uses biomass char as an auto-generated catalyst in the gasification process.

Excellent porous environmental nanocatalyst: tactically integrating size-confined highly active MnOx in nanospaces of mesopores enables the promotive catalytic degradation efficiency of organic contaminants

A nanoporous molecular sieve catalyst containing size-confined MnO_x species, which affords excellent environmental catalytic efficiency, was synthesized using a micelle-assisted in situ embedding strategy.