Atomic resolution structure of the HFBII hydrophobin, a self-assembling amphiphile

Amperometric glucose biosensor based on self-assembly hydrophobin with high efficiency of enzyme utilization

Hydrophobins are a family of natural self-assembling proteins with high biocompability, which are apt to form strong and ordered assembly onto many kinds of surfaces. These physical-chemical and biological properties make hydrophobins suitable for surface modification and biomolecule immobilization purposes. A class II hydrophobin HFBI was used as enzyme immobilization matrix on platinum electrode to construct amperometric glucose biosensor. Permeability of HFBI self-assembling film was optimized by selecting the proper HFBI concentration for electrode modification, in order to allow H(2)O(2) permeating while prevent interfering compounds accessing. HFBI self-assembly and glucose oxidase (GOx) immobilization was monitored by quartz crystal microbalance (QCM), and characterization of the modified electrode surface was obtained by scanning electron microscope (SEM). The resulting glucose biosensors showed rapid response time within 6s, limits of detection of 0.09 mM glucose (signal-to-noise ratio=3), wide linear range from 0.5 to 20mM, high sensitivity of 4.214 x 10(-3)AM(-1)cm(-2), also well selectivity, reproducibility and lifetime. The all-protein modified biosensor exhibited especially high efficiency of enzyme utilization, producing at most 712 microA responsive current for per unit activity of GOx. This work provided a promising new immobilization matrix with high biocompatibility and adequate electroactivity for further research in biosensing and other surface functionalizing.

Evolution of nucleotide sequences and expression patterns of hydrophobin genes in the ectomycorrhizal fungus Paxillus involutus

Hydrophobins are small, secreted proteins that play important roles in the development of pathogenic and symbiotic fungi. Evolutionary mechanisms generating sequence and expression divergence among members in hydrophobin gene families are largely unknown. Seven hydrophobin (hyd) genes and one hyd pseudogene were isolated from strains of the ectomycorrhizal fungus Paxillus involutus. Sequences were analysed using phylogenetic methods. Expression profiles were inferred from microarray experiments. The hyd genes included both young (recently diverged) and old duplicates. Some young hyd genes exhibited an initial phase of enhanced sequence evolution owing to relaxed or positive selection. There was no significant association between sequence divergence and variation in expression levels. However, three hyd genes displayed a shift in the expression levels or an altered tissue specificity following duplication. The Paxillus hyd genes evolve according to the so-called birth-and-death model in which some duplicates are maintained for a long time, whereas others are inactivated through mutations. The role of subfunctionalization and/or neofunctionalization for preserving the hyd duplicates in the genome is discussed.

Two crystal structures of Trichoderma reesei hydrophobin HFBI--the structure of a protein amphiphile with and without detergent interaction

Hydrophobins are small fungal proteins that are highly surface active and possess a unique ability to form amphiphilic membranes through spontaneous self-assembly. The first crystal structure of a hydrophobin, Trichoderma reesei HFBII, revealed the structural basis for the function of this amphiphilic protein--a patch consisting of hydrophobic side chains on the protein surface. Here, the crystal structures of a native and a variant T. reesei hydrophobin HFBI are presented, revealing the same overall structure and functional hydrophobic patch as in the HFBII structure. However, some structural flexibility was found in the native HFBI structure: The asymmetric unit contained four molecules, and, in two of these, an area of seven residues was displaced as compared to the two other HFBI molecules and the previously determined HFBII structure. This structural change is most probably induced by multimer formation. Both the native and the N-Cys-variant of HFBI were crystallized in the presence of detergents, but an association between the protein and a detergent was only detected in the variant structure. There, the molecules were arranged into an extraordinary detergent-associated octamer and the solvent content of the crystals was 75%. This study highlights the conservation of the fold of class II hydrophobins in spite of the low sequence identity and supports our previous suggestion that concealment of the hydrophobic surface areas of the protein is the driving force in the formation of multimers and monolayers in the self-assembly process.

Behavior of Trichoderma reesei Hydrophobins in Solution: Interactions, Dynamics, and Multimer Formation

Filamentous fungi utilize small amphiphilic proteins called hydrophobins in their adaptation to the environment. The hydrophobins are used to form coatings on various fungal structures, lower the surface tension of water, and to mediate surface attachment. Hydrophobins function through self-assembly at interfaces, for example, at the air-water interface, and at fungal cellular structures. Despite their high tendency to self assemble at interfaces, hydrophobins can be very soluble in water. To understand the mechanism of hydrophobin self-assembly, in this work, we have studied the behavior of two Trichoderma reesei hydrophobins, HFBI and HFBII in aqueous solution. The main methods used were Förster resonance energy transfer (FRET) and size exclusion chromatography. A genetically engineered HFBI variant, NCys-HFBI, was utilized for the site-specific labeling of dyes for the FRET experiments. We observed the multimerization of HFBI in a concentration-dependent manner. A change from monomers to tetramers was seen when the hydrophobin concentration was increased. Interaction studies between HFBI and HFBII suggested that at low concentrations homodimers are preferred, and at higher concentrations, the heterotetramers of HFBI and HFBII are formed. In conclusion, the results support the model where hydrophobins in aqueous solutions form multimers by hydrophobic interactions. In contrast to micelles formed by detergents, the hydrophobin multimers are defined in size and involve specific protein-protein interactions.

Molecular dynamics simulations of the hydrophobin SC3 at a hydrophobic/hydrophilic interface

Hydrophobins are small ( approximately 100 aa) proteins that have an important role in the growth and development of mycelial fungi. They are surface active and, after secretion by the fungi, self-assemble into amphipathic membranes at hydrophobic/hydrophilic interfaces, reversing the hydrophobicity of the surface. In this study, molecular dynamics simulation techniques have been used to model the process by which a specific class I hydrophobin, SC3, binds to a range of hydrophobic/hydrophilic interfaces. The structure of SC3 used in this investigation was modeled based on the crystal structure of the class II hydrophobin HFBII using the assumption that the disulfide pairings of the eight conserved cysteine residues are maintained. The proposed model for SC3 in aqueous solution is compact and globular containing primarily beta-strand and coil structures. The behavior of this model of SC3 was investigated at an air/water, an oil/water, and a hydrophobic solid/water interface. It was found that SC3 preferentially binds to the interfaces via the loop region between the third and fourth cysteine residues and that binding is associated with an increase in alpha-helix formation in qualitative agreement with experiment. Based on a combination of the available experiment data and the current simulation studies, we propose a possible model for SC3 self-assembly on a hydrophobic solid/water interface.

Analytical Investigation of the Interactions between SC3 Hydrophobin and Lipid Layers: Elaborating of Nanostructured Matrixes for Immobilizing Redox Systems

Hydrophobins are highly tensioactive fungal proteins with a pronounced affinity for interfaces and a propensity for self-assembly. Recently, these proteins were shown to be useful in retaining different molecules on solid surfaces. This finding offers a possibility for developing new functional materials, while creating the necessity of further research at a deeper mechanistic level. In this work, the mechanisms governing the surface phenomena were studied using native Schizophyllum commune hydrophobin (SC3) and lipid mono- and bilayers; the soft matter systems were used to get a handle on the interactive protein/interface effects at a molecular level. The results obtained indicated that the SC3/lipid membrane interactions were adjusted by protein conformational adaptation, allowing its incorporation into lipid matrixes; the incorporation of a chelating SC3 hydrophobin (PFA-SC3) in a monoolein cubic phase yielded a biomimetic, cell-like system of Cu(II) cation immobilization. This system, which is suitable for modifying electrode surface and monitoring the Cu(II)/Cu(0) redox process, may be of practical interest in switching and sensing.

Morphogenetic surfactants and their role in the formation of aerial hyphae in Streptomyces coelicolor

Withstanding environmental adversity and seeking optimal conditions for reproduction are basic requirements for the survival of all organisms. Filamentous bacteria of the genus Streptomyces produce a remarkable cell type called the aerial hyphae that is central to its ability to meet both of these challenges. Recent advances have brought about a major shift in our understanding of the cell surface proteins that play important roles in the generation of these cells. Here we review our current understanding of one of these groups of proteins, the morphogenetic surfactants, with emphasis on the SapB protein of Streptomyces coelicolor.

Nanoscale Reduction in Surface Friction of Polymer Surfaces Modified with Sc3 Hydrophobin from Schizophyllum commune

Hydrophobins are amphipathic self-assembling proteins secreted by filamentous fungi that exhibit remarkable ability to modify synthetic surfaces. Thin coatings of Sc3 hydrophobin isolated from the wood-rotting fungus Schizophyllum commune were prepared via spin coating and adsorption techniques onto polymeric surfaces. Surface morphology and nanotribological characteristics of the films were evaluated using lateral force microscopy (LFM) and nanoindentation techniques. This paper reports the first observation of reduction in nanoscale relative surface friction of Sc3 hydrophobin protein modified polymeric surfaces. Relative friction coefficients were dramatically reduced and hydrophilicity increased for polymer surfaces modified with Sc3 hydrophobin thin films. Morphology of the protein films as well as degree of surface modification was observed to be a function of film formation technique and composition of the substrate.

Interaction and Comparison of a Class I Hydrophobin from Schizophyllum commune and Class II Hydrophobins from Trichoderma reesei

Hydrophobins fulfill a wide spectrum of functions in fungal growth and development. These proteins self-assemble at hydrophilic-hydrophobic interfaces into amphipathic membranes. Hydrophobins are divided into two classes based on their hydropathy patterns and solubility. We show here that the properties of the class II hydrophobins HFBI and HFBII of Trichoderma reesei differ from those of the class I hydrophobin SC3 of Schizophyllum commune. In contrast to SC3, self-assembly of HFBI and HFBII at the water-air interface was neither accompanied by a change in secondary structure nor by a change in ultrastructure. Moreover, maximal lowering of the water surface tension was obtained instantly or took several minutes in the case of HFBII and HFBI, respectively. In contrast, it took several hours in the case of SC3. Oil emulsions prepared with HFBI and SC3 were more stable than those of HFBII, and HFBI and SC3 also interacted more strongly with the hydrophobic Teflon surface making it wettable. Yet, the HFBI coating did not resist treatment with hot detergent, while that of SC3 remained unaffected. Interaction of all the hydrophobins with Teflon was accompanied with a change in the circular dichroism spectra, indicating the formation of an alpha-helical structure. HFBI and HFBII did not affect self-assembly of the class I hydrophobin SC3 of S. commune and vice versa. However, precipitation of SC3 was reduced by the class II hydrophobins, indicating interaction between the assemblies of both classes of hydrophobins.

Structural basis for rodlet assembly in fungal hydrophobins

Class I hydrophobins are a unique family of fungal proteins that form a polymeric, water-repellent monolayer on the surface of structures such as spores and fruiting bodies. Similar monolayers are being discovered on an increasing range of important microorganisms. Hydrophobin monolayers are amphipathic and particularly robust, and they reverse the wettability of the surface on which they are formed. There are also significant similarities between these polymers and amyloid-like fibrils. However, structural information on these proteins and the rodlets they form has been elusive. Here, we describe the three-dimensional structure of the monomeric form of the class I hydrophobin EAS. EAS forms a beta-barrel structure punctuated by several disordered regions and displays a complete segregation of charged and hydrophobic residues on its surface. This structure is consistent with its ability to form an amphipathic polymer. By using this structure, together with data from mutagenesis and previous biophysical studies, we have been able to propose a model for the polymeric rodlet structure adopted by these proteins. X-ray fiber diffraction data from EAS rodlets are consistent with our model. Our data provide molecular insight into the nature of hydrophobin rodlet films and extend our understanding of the fibrillar beta-structures that continue to be discovered in the protein world.

Hydrophobins: the protein-amphiphiles of filamentous fungi

Hydrophobins are surface active proteins produced by filamentous fungi. They have a role in fungal growth as structural components and in the interaction of fungi with their environment. They have, for example, been found to be important for aerial growth, and for the attachment of fungi to solid supports. Hydrophobins also render fungal structures, such as spores, hydrophobic. The biophysical properties of the isolated proteins are remarkable, such as strong adhesion, high surface activity and the formation of various self-assembled structures. The first high resolution three dimensional structure of a hydrophobin, HFBII from Trichoderma reesei, was recently solved. In this review, the properties of hydrophobins are analyzed in light of these new data. Various application possibilities are also discussed.

Four conserved intramolecular disulphide linkages are required for secretion and cell wall localization of a hydrophobin during fungal morphogenesis

Hydrophobins are morphogenetic proteins produced by fungi during assembly of aerial hyphae, sporulation, mushroom development and pathogenesis. Eight cysteine residues are present in hydrophobins and form intramolecular disulphide bonds. Here, we show that expressing eight cysteine-alanine substitution alleles of the MPG1 hydrophobin gene from Magnaporthe grisea causes severe defects in development of aerial hyphae and spores. Immunolocalization revealed that Mpg1 hydrophobin variants, lacking intact disulphide bonds, retain the capacity to self-assemble, but are not secreted to the cell surface. This provides the first genetic evidence that disulphide bridges in a hydrophobin are dispensable for aggregation, but essential for secretion.

MHP1, aMagnaporthe griseahydrophobin gene, is required for fungal development and plant colonization

Fungal hydrophobins are implicated in cell morphogenesis and pathogenicity in several plant pathogenic fungi including the rice blast fungus Magnaporthe grisea. A cDNA clone encoding a hydrophobin (magnaporin, MHP1) was isolated from a cDNA library constructed from rice leaves infected by M. grisea. The MHP1 codes for a typical fungal hydrophobin of 102 amino acids containing eight cysteine residues spaced in a conserved pattern. Hydropathy analysis of amino acids revealed that MHP1 belongs to the class II group of hydrophobins. The amino acid sequence of MHP1 exhibited about 20% similarity to MPG1, an M. grisea class I hydrophobin. Expression of MHP1 was highly induced during plant colonization and conidiation, but could hardly be detected during mycelial growth. Transformants in which MHP1 was inactivated by targeted gene replacement showed a detergent wettable phenotype, but were not altered in wettability with water. mhp1 mutants also exhibited pleiotropic effects on fungal morphogenesis, including reduction in conidiation, conidial germination, appressorium development and infectious growth in host cells. Furthermore, conidia of mhp1 mutants were defective in their cellular organelles and rapidly lose viability. As a result, mhp1 mutants exhibited a reduced ability to infect and colonize a susceptible rice cultivar. These phenotypes were recovered by re-introduction of an intact copy of MHP1. Taken together, these results indicate that MHP1 has essential roles in surface hydrophobicity and infection-related fungal development, and is required for pathogenicity of M. grisea.

Amyloids--a functional coat for microorganisms

Amyloids are filamentous protein structures approximately 10 nm wide and 0.1-10 mum long that share a structural motif, the cross-beta structure. These fibrils are usually associated with degenerative diseases in mammals. However, recent research has shown that these proteins are also expressed on bacterial and fungal cell surfaces. Microbial amyloids are important in mediating mechanical invasion of abiotic and biotic substrates. In animal hosts, evidence indicates that these protein structures also contribute to colonization by activating host proteases that are involved in haemostasis, inflammation and remodelling of the extracellular matrix. Activation of proteases by amyloids is also implicated in modulating blood coagulation, resulting in potentially life-threatening complications.

Building filaments in the air: aerial morphogenesis in bacteria and fungi

To disperse their spores to new sites, filamentous fungi and bacteria need to erect aerial filaments, which develop into fruiting bodies and spore-bearing structures. The first challenge to aerial development is breaking surface tension at an aqueous-air interface, and in both groups of microorganisms, surface-active proteins take part in the initiation of aerial morphogenesis. Comparative analysis of fungi and bacteria is providing new insights into the means by which aerial filamentation is accomplished.

Adsorption of frog foam nest proteins at the air-water interface

The surfactant properties of aqueous protein mixtures (ranaspumins) from the foam nests of the tropical frog Physalaemus pustulosus have been investigated by surface tension, two-photon excitation fluorescence microscopy, specular neutron reflection, and related biophysical techniques. Ranaspumins lower the surface tension of water more rapidly and more effectively than standard globular proteins under similar conditions. Two-photon excitation fluorescence microscopy of nest foams treated with fluorescent marker (anilinonaphthalene sulfonic acid) shows partitioning of hydrophobic proteins into the air-water interface and allows imaging of the foam structure. The surface excess of the adsorbed protein layers, determined from measurements of neutron reflection from the surface of water utilizing H(2)O/D(2)O mixtures, shows a persistent increase of surface excess and layer thickness with bulk concentration. At the highest concentration studied (0.5 mg ml(-1)), the adsorbed layer is characterized by three distinct regions: a protruding top layer of approximately 20 angstroms, a middle layer of approximately 30 angstroms, and a more diffuse submerged layer projecting some 25 angstroms into bulk solution. This suggests a model involving self-assembly of protein aggregates at the air-water interface in which initial foam formation is facilitated by specific surfactant proteins in the mixture, further stabilized by subsequent aggregation and cross-linking into a multilayer surface complex.

Amyloid formation: an emulation of matrix protein assembly?

Although more than 20 different proteins are now associated with the amyloidoses, the fibrils share many properties. Despite disparity in primary and tertiary structures of the subunit proteins, assembled fibrils exhibit similar morphology, binding of Congo red, interaction with Thioflavine T, formation of complexes with serum amyloid P component, apolipoprotein E, several glycosaminoglycans, the receptor for advanced glycation endproducts and cross-recognition by some monoclonal antibodies. Thus, it is probable that the mechanism of amyloid generation involves a generic process that can be evoked by most, if not all, proteins under conditions that degrade the native conformation. As suggested by others, the beta-helix or beta-roll conformation may be the unifying element of fibril conformations. Several proteins that have evolved to form physiologically useful amyloid-like fibrils, as well as some proteins associated with pathological amyloidoses, exhibit sequence repeat patterns that may facilitate beta-roll or beta-helix formation. Threading analyses of 2 natural amyloid-forming proteins, curli and human Pmel 17, indicate compatibility of their primary structures with both beta sandwich and beta-helix conformations, suggesting a possible innate conformational pliability. In addition, these results may suggest that the misfolded form of some proteins that are associated with conformational disease may be the native conformation of other proteins to which they are linked by evolution. Finally, since many matrix and structural proteins are known to incorporate numerous tandem repeat sequence elements, we propose that the mechanism of fibril formation is fundamentally related to a general protein assembly process that is integral to the generation of cells and tissues.

The power of two: protein dimerization in biology

The self-association of proteins to form dimers and higher-order oligomers is a very common phenomenon. Recent structural and biophysical studies show that protein dimerization or oligomerization is a key factor in the regulation of proteins such as enzymes, ion channels, receptors and transcription factors. In addition, self-association can help to minimize genome size, while maintaining the advantages of modular complex formation. Oligomerization, however, can also have deleterious consequences when nonnative oligomers associated with pathogenic states are generated. Specific protein dimerization is integral to biological function, structure and control, and must be under substantial selection pressure to be maintained with such frequency throughout biology.

The SapB morphogen is a lantibiotic-like peptide derived from the product of the developmental gene ramS in Streptomyces coelicolor

SapB is a morphogenetic peptide that is important for aerial mycelium formation by the filamentous bacterium Streptomyces coelicolor. Production of SapB commences during aerial mycelium formation and depends on most of the genes known to be required for the morphogenesis of aerial hyphae. Furthermore, the application of purified SapB to mutants blocked in morphogenesis restores their capacity to form aerial hyphae. Here, we present evidence that SapB is a lantibiotic-like peptide that is derived by posttranslational modification from the product of a gene (ramS) in the four-gene ram operon, which is under the control of the regulatory gene ramR. We show that the product of another gene in the operon (ramC) contains a region that is similar to enzymes involved in the biosynthesis of lantibiotics, suggesting that it might be involved in the posttranslational processing of RamS. We conclude that SapB is derived from RamS through proteolytic cleavage and the introduction of four dehydroalanine residues and two lanthionine bridges. We provide an example of a morphogenetic role for an antibiotic-like molecule.