Turning carbon dioxide into fuel

Photocatalytic Reduction of Carbon Dioxide by Water: A Step towards Sustainable Fuels and Chemicals

Photo catalytic reduction of carbon dioxide orartificial photo synthesisto yield hydrogen and hydrocarbons like methane, methanol etc., has emerged as a subject/process of intensive study due to its potential applications towards abatement of atmospheric CO2levels and conversion to fuels and chemicals. This Chapter provides a comprehensive picture of the process that has posed several scientific and technological challenges, like activation of most stable molecules-CO2and water, extremely low conversion rates, complex reaction pathways involving multi electron transfer steps and short catalyst life. All the major aspects/developments on this process like, the salient features and technological aspects, thermodynamic and kinetic characteristics, various types of photo-active catalysts-, like, titania based catalysts and titania with various dopants and modifiers, various metal oxides/sulfides/nitrides/ layered titanates, binary and ternary oxides of Nb, Ta, Ga & In mixed oxide catalysts, metal complexes, and supra molecular catalysts-, sensitization by macro cylic ligands, influence of process parameters, catalyst structure-property-activity correlations, aspects of deactivation of catalysts, reaction mechanistic aspects and sequential surface reaction pathways, recent trends and future directions have been covered. Design and development of efficient catalyst systems and achieving higher yield of desired products (higher selectivity) and extending the catalyst life are the key issues being pursued by the researchers. The process is in nascent stage and further improvements are needed as CO2conversion rates are extremely small, with products formed in terms of 1-10 micro moles/hr. One of the means of improving the process efficiency is to carry out electrochemical reduction of CO2using solar electric power, with an integrated Photo electrochemical cell (PEC). Yet another option is to reduce CO2to methanol with hydrogen produced using solar powered PEC.

Reaction of carbon dioxide with a palladium-alkyl complex supported by a bis-NHC framework

The reactivity of a dimethyl palladium complex supported by a dicarbene chelate (MDC(Mes))PdMe(2) towards CO(2) has been investigated. In the presence of trace H(2)O, this reaction yields the corresponding methyl bicarbonate complex (MDC(Mes))PdMe(O(2)COH), which goes on to give the corresponding κ(2)-carbonato complex upon crystallization (MDC(Mes))Pd(CO(3)). This chemistry, as well as related protonolysis by acetic acid was monitored by a combination of techniques including React-IR spectroscopy.

Formation of Graphene Oxide Nanocomposites from Carbon Dioxide Using Ammonia Borane

To efficiently recycle CO(2) to economically viable products such as liquid fuels and carbon nanomaterials, the reactivity of CO(2) is required to be fully understood. We have investigated the reaction of CO(2) with ammonia borane (AB), both molecules being able to function as either an acid or a base, to obtain more insights into the amphoteric activity of CO(2). In the present work, we demonstrate that CO(2) can be converted to graphene oxide (GO) using AB at moderate conditions. The conversion consists of two consecutive steps: CO(2) fixation (CO(2) pressure < 3 MPa and temperature < 100 °C) and graphenization (600-750 °C under 0.1 MPa of N(2)). The first step generates a solid compound that contains methoxy (OCH(3)), formate (HCOO) and aliphatic groups while the second graphenization is the pyrolysis of the solid compound to produce graphene oxide-boron oxide nanocomposites, which have been confirmed by micro-Raman spectroscopy, solid state (13)C and (11)B magic angle spinning-nuclear magnetic resonance (MAS-NMR), transmission electron microscopy (TEM), and atomic force microscopy (AFM). Our observations also show that the mass of solid product in CO(2) fixation process and raw graphene oxide nanocomposites is twice and 1.2 times that of AB initially charged, respectively. The formation of aliphatic groups without using metal-containing compounds at mild conditions is of great interest to the synthesis of various organic products starting from CO(2.).

Utilization of greenhouse gases through dry reforming: screening of nickel-based bimetallic catalysts and kinetic studies

A series of bimetallic catalysts containing nickel supported over MgO-ZrO2 were tested for activity in the dry reforming of carbon dioxide. A nickel-cobalt bimetallic catalyst gave the best performance in terms of conversion and coke resistance from a range of Ni-X bimetallic catalysts, X=Ca, K, Ba, La, and Ce. The nitrogen-adsorption and hydrogen-chemisorption studies showed the Ni-Co bimetallic supported catalyst to have good surface area with high metal dispersion. This contributed to the high catalytic activity, in terms of conversion activity and stability of the catalyst, at an equimolar methane/carbon dioxide feed ratio. The kinetics of methane dry reforming are studied in a fixed-bed reactor over an Ni-Co bimetallic catalyst in the temperature range 700-800 °C by varying the partial pressures of CH4 and CO2. The experimental data were analyzed based on the proposed reaction mechanism using the Langmuir-Hinshelwood kinetic model. The activation energies for methane and carbon dioxide consumption were estimated at 52.9 and 48.1 kJ mol(-1), respectively. The lower value of CO2 activation energy compared to the activation energy of CH4 indicated a higher reaction rate of CO2, which owes to the strong basicity of nanocrystalline support, MgO-ZrO2.

Chemical technologies for exploiting and recycling carbon dioxide into the value chain

While experts in various fields discuss the potential of carbon capture and storage (CCS) technologies, the utilization of carbon dioxide as chemical feedstock is also attracting renewed and rapidly growing interest. These approaches do not compete; rather, they are complementary: CCS aims to capture and store huge quantities of carbon dioxide, while the chemical exploitation of carbon dioxide aims to generate value and develop better and more-efficient processes from a limited part of the waste stream. Provided that the overall carbon footprint for the carbon dioxide-based process chain is competitive with conventional chemical production and that the reaction with the carbon dioxide molecule is enabled by the use of appropriate catalysts, carbon dioxide can be a promising carbon source with practically unlimited availability for a range of industrially relevant products. In addition, it can be used as a versatile processing fluid based on its remarkable physicochemical properties.

Hydrogen generation from formic acid decomposition by ruthenium carbonyl complexes. Tetraruthenium dodecacarbonyl tetrahydride as an active intermediate

The present Minireview covers the formation and the structural characterization of noble metal carbonyl and hydrido carbonyl complexes, with particular emphasis on ruthenium complexes using formic acid as a carbonyl and hydride source. The catalytic activity of these organometallic compounds for the decarboxylation of formic acid, a potential hydrogen storage material, is also reviewed. In addition, the first preparation of [Ru(4)(CO)(12)H(4)] from RuCl(3) and formic acid as well as the catalytic activity of [Ru(4)(CO)(12)H(4)] for the decomposition of formic acid to hydrogen and carbon dioxide are presented.

Carbon dioxide recycling: emerging large-scale technologies with industrial potential

This Review introduces this special issue of ChemSusChem dedicated to CO(2) recycling. Its aim is to offer an up-to-date overview of CO(2) chemical utilization (inorganic mineralization, organic carboxylation, reduction reactions, and biochemical conversion), as a continuation and extension of earlier books and reviews on this topic, but with a specific focus on large-volume routes and projects/pilot plants that are currently emerging at (pre-)industrial level. The Review also highlights how some of these routes will offer a valuable opportunity to introduce renewable energy into the existing energy and chemical infrastructure (i.e., "drop-in" renewable energy) by synthesis of chemicals from CO(2) that are easy to transport and store. CO(2) conversion therefore has the potential to become a key pillar of the sustainable and resource-efficient production of chemicals and energy from renewables.

Efficient hydrogenation of organic carbonates, carbamates and formates indicates alternative routes to methanol based on CO2 and CO

Catalytic hydrogenation of organic carbonates, carbamates and formates is of significant interest both conceptually and practically, because these compounds can be produced from CO2 and CO, and their mild hydrogenation can provide alternative, mild approaches to the indirect hydrogenation of CO2 and CO to methanol, an important fuel and synthetic building block. Here, we report for the first time catalytic hydrogenation of organic carbonates to alcohols, and carbamates to alcohols and amines. Unprecedented homogeneously catalysed hydrogenation of organic formates to methanol has also been accomplished. The reactions are efficiently catalysed by dearomatized PNN Ru(II) pincer complexes derived from pyridine- and bipyridine-based tridentate ligands. These atom-economical reactions proceed under neutral, homogeneous conditions, at mild temperatures and under mild hydrogen pressures, and can operate in the absence of solvent with no generation of waste, representing the ultimate 'green' reactions. A possible mechanism involves metal-ligand cooperation by aromatization-dearomatization of the heteroaromatic pincer core.

CO2 Capture from Dilute Gases as a Component of Modern Global Carbon Management

The growing atmospheric CO2 concentration and its impact on climate have motivated widespread research and development aimed at slowing or stemming anthropogenic carbon emissions. Technologies for carbon capture and sequestration (CCS) employing mass separating agents that extract and purify CO2 from flue gas emanating from large point sources such as fossil fuel–fired electricity-generating power plants are under development. Recent advances in solvents, adsorbents, and membranes for postcombust- ion CO2 capture are described here. Specifically, room-temperature ionic liquids, supported amine materials, mixed matrix and facilitated transport membranes, and metal-organic framework materials are highlighted. In addition, the concept of extracting CO2 directly from ambient air (air capture) as a means of reducing the global atmospheric CO2 concentration is reviewed. For both conventional CCS from large point sources and air capture, critical research needs are identified and discussed.

On the role of CO2 in NHC-catalyzed oxidation of aldehydes

NHC-catalyzed oxidations using carbon dioxide as the stoichiometric oxidant have been carefully investigated. These studies support a secondary role of CO(2) in suppressing side reactions and exogenous oxygen as the actual oxidant.