Increased Silver Activity for Direct Propylene Epoxidation via Subnanometer Size Effects

Chain-End Functionalized Polymers for the Controlled Synthesis of Sub-2 nm Particles

A novel method for synthesizing arrays of uniform sub-2 nm particles on substrates is described. Such particles are made by (i) using dip-pen nanolithography to prepare nanoreactors consisting of metal-coordinated polymers; (ii) designing polymers with only one metal atom attached to each polymer chain; (iii) systematically controlling nanoreactor volume down to the yoctoliter scale; and (iv) transforming each nanoreactor into a metal nanoparticle through thermal annealing. Polymer design in this study is crucial, since it allows one to tightly control nanoparticle size by tuning the volume of the polymer reactors, which correlates with the number of polymer chains and, therefore, metal atoms. Mixtures of different metal-functionalized polymers were used to synthesize ultrasmall alloy particles. The technique and results described herein point toward a way of using these novel polymers to systematically explore the properties and uses of this important class of nanomaterials in many fields.

Single Au Atoms Anchored on Amino-Group-Enriched Graphitic Carbon Nitride for Photocatalytic CO2 Reduction

Owing to the maximum atom-utilization efficiency and excellent catalytic properties, Au single-atom catalysts (SACs) have been extensively studied in various catalytic systems. However, the performance of Au SACs in CO₂ reduction has seldom been investigated. Herein, Au single atoms on amino-group-modified graphitic carbon nitride (U-ACN) was successfully synthesized through a mild and eco-friendly urea reduction method. U-ACN showed a remarkable performance for CO₂ reduction, with CO and CH₄ yields 1.97 and 4.15 times higher than those of pure graphitic carbon nitride over 2.5 h visible-light irradiation. The excellent catalytic activity of U-ACN derived from the introduction of Au single atoms, which lowered the energy barrier of CH₄ formation, narrowed the band gap, and hindered the recombination of charge carriers. In addition, U-ACN showed improved CO₂ affinity owing to the amino groups in the catalysts introduced by urea.

Recent advancement in the electrocatalytic synthesis of ammonia

Ammonia can not only be used as an active nitrogen component of nitrogen fertilizers, fibers, explosives, etc., but also provides a high energy density and carbon free energy carrier. Currently, ammonia is industrially synthesized by the Haber Bosch process at high temperature and high pressure, which results in high energy loss and a serious greenhouse effect. The electrocatalytic nitrogen reduction reaction (NRR) is a sustainable and environmentally friendly strategy for the synthesis of ammonia. Although lots of electrocatalysts have been developed for this reaction, further breakthroughs are needed in catalytic activity, selectivity and Faraday efficiency to meet the large-scale commercial demand. In this review, the recent advance in NRR electrocatalysis is thoroughly commented on. Different kinds of electrocatalysts used in ammonia synthesis (including single atom catalysts, metal oxide catalysts, nanocomposite catalysts, and metal free catalysts) are introduced. The reaction mechanism of the NRR is discussed in detail. The structure-function relationship and efficient strategies to improve the ammonia yield are clearly discussed. The effect of the electronic structure and morphology of catalysts on the selectivity of the NRR is highlighted. The research directions and perspectives on the further development of more efficient electrocatalysts for the NRR are provided.

Selective Oxidation of Propylene on Cu2O(111) and Cu2O(110) Surfaces: A Systematically DFT Study

Density functional theory calculations with a Hubbard U correction were used to investigate the selective oxidation of propylene on Cu₂O(111) and Cu₂O(110) surfaces, and the mechanism for the selective oxidation of propylene was discussed. On both surfaces, acrolein can be generated by two H-stripping reactions in the allylic hydrogen stripping path, while propylene oxide (PO), propanal, and acetone can be created through the propylene oxametallacycle intermediates in the epoxidation path. Our calculation results indicated that Cu₂O has a high crystal plane-controlled phenomenon for the selective oxidation of propylene. It was found that the formations of propanal and acetone are unfavorable kinetically and acrolein is the main product on the (111) surface. On the (110) surface, the activation barrier of acrolein formation is too high to produce and PO becomes the favored product, which is different from the case of the (111) surface. Moreover, energetic span model analysis was carried out to discuss the selective oxidation of propylene on these two surfaces and confirm the above calculations. The present study can help people to design the proper crystal plane catalyst to get the target product of PO with high selectivity and activity in the selective oxidation of propylene.

Ultra-fine platinum species supported on niobium pentoxide for CO oxidation

Platinum oxide supported on a Lewis acid niobium oxide (Nb₂O₅) support has been used for various heterogeneous and homogeneous catalysts. In this work, we used urea as a precipitating agent to obtain crystallized Nb₂O₅ with high surface area via a hydrothermal route. Nb₂O₅-supported Pt catalysts were subsequently synthesized via an incipient wetness impregnation approach. Multiple characterizations including X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and nitrogen adsorption/desorption confirmed the identical structural and textural properties of the Nb₂O₅ support before and after the impregnation process. Furthermore, the X-ray absorption fine structure technique (XAFS) results with related data analysis indicate that the platinum species in the fresh and H₂-pretreated samples were in the form of single atoms or ultrafine clusters. In addition, the decrease in coordination number (CN) of the first-shell Pt–O bond, as well as the formation of Pt–Pt contribution with very low CN, after H₂-pretreatment was verified, which corresponds to the decrease of oxidation state for Pt species on the surface of supports. Thus, the ultrafine-clustered metallic Pt species are considered to be more active than the oxidized Pt single ions. The current results will be of great significance in controllable synthesis of active Pt-based catalysts for other catalytic oxidation reactions.

Ultrafine-clustered metallic Pt species are considered to be more active than oxidized Pt single ions for CO oxidation reaction.

Impact of Titanium in Controlling Silver Particle Size on Enhancement of Catalytic Performance of AgMoO3/Ti-HMS for Direct Epoxidation of Propylene

In this work, direct gas-phase epoxidation of propylene (DPO) to propylene oxide by molecular oxygen has been studied by using Ag-MoO₃ supported on titanium-containing hexagonal mesoporous silica (Ti-HMS _n ) of different Si/Ti molar ratios. The promotion effect of NaCl on the synthesized catalysts has also been investigated. Among the studied supports, the hexagonal mesoporous silica (HMS) with a Si/Ti ratio of 10 was the most suitable one for production of propylene oxide (PO). The optimal performance of the AgMo/Ti-HMS₁₀ catalyst in DPO exhibited a selectivity to PO of 43.2% with a propylene conversion of 14.1%, at 400 °C, 0.1 MPa, and a space velocity of 12,000 h^-1. The catalyst verified good stability over at least 20 h on stream. Only 2.7% PO selectivity with a propylene conversion of 10.1% was achieved over the AgMo/HMS sample. The incorporation of Ti into the HMS frame could optimize the particle size distribution of Ag, producing Ag nanoparticles with an average size of 6.8 nm compared with that of Ag/HMS (24.3 nm). The in situ Raman spectrum of AgMo/Ti-HMS₁₀ heated in a stream of C₃H₆/He at 400 °C showed new bands at 616, 390, and 210 cm^-1, characteristic of the Ag _x Mo _y O _z intermediate phase. The obtained results suggested that this formed AgMo/Ti-HMS₁₀ phase could most likely be relevant for selective epoxidation of propylene. However, during the reaction of C₃H₆ with AgMo/HMS, the formation of this intermediate was hardly detected. On the other hand, the hydrogen temperature-programmed reduction measurements indicated improved reducibility of MoO₃ in the AgMo/Ti-HMS₁₀ catalyst, which acknowledged the role of Mo⁶⁺ in gaining electrons from silver to form positively charged Ag. This could reduce the effective charge of the adsorbed oxygen on silver sites and in turn favor the epoxidation path of propylene rather than the combustion route. Also, during the reaction of C₃H₆ with NaAgMo/Ti-HMS₁₀ at 400 °C, two new Raman bands were detected at 277 and 350 cm^-1, characteristic of Ag₂MoO₄.

Enhanced Catalytic Performance of Subnano Copper Oxide Particles

Subnanoparticles (SNPs) with ultrasmall particle sizes (<1 nm) have potential to provide catalytic activity that is superior to that of nanoparticles. Size-controlled Cu_nO_x (n = 12, 28, and 60) materials supported on zirconia, prepared using a dendritic macromolecular reactor, exhibited increased ionicity of the Cu-O bonds with a decrease in size of the particles, which was suggested on the basis of the peak intensity in the Cu 2p_3/2 region. The polarization of the Cu-O bonds in the ultrasmall copper oxides provides size-dependent catalytic activity in aerobic oxidation of the CH₃ group bonded with aromatic rings. The smallest Cu₁₂O_x materials achieved an excellent large turnover number (TON = 40 206) without any significant deactivation.

Stable single platinum atoms trapped in sub-nanometer cavities in 12CaO·7Al2O3 for chemoselective hydrogenation of nitroarenes

Single-atom catalysts (SACs) have attracted significant attention because they exhibit unique catalytic performance due to their ideal structure. However, maintaining atomically dispersed metal under high temperature, while achieving high catalytic activity remains a formidable challenge. In this work, we stabilize single platinum atoms within sub-nanometer surface cavities in well-defined 12CaO·7Al₂O₃ (C12A7) crystals through theoretical prediction and experimental process. This approach utilizes the interaction of isolated metal anions with the positively charged surface cavities of C12A7, which allows for severe reduction conditions up to 600 °C. The resulting catalyst is stable and highly active toward the selective hydrogenation of nitroarenes with a much higher turnover frequency (up to 25772 h^-1) than well-studied Pt-based catalysts. The high activity and selectivity result from the formation of stable trapped single Pt atoms, which leads to heterolytic cleavage of hydrogen molecules in a reaction that involves the nitro group being selectively adsorbed on C12A7 surface.

Single Atom Dynamics in Chemical Reactions

Many heterogeneous chemical reactions involve gases catalyzed over solid surfaces at elevated temperatures and play a critical role in the production of energy, healthcare, pollution control, industrial products, and food. These catalytic reactions take place at the atomic level, with active structures forming under reaction conditions. A fundamental understanding of catalysis at the single atom resolution is therefore a major advance in a rational framework upon which future catalytic processes can be built. Visualization and analysis of gas-catalyst chemical reactions at the atomic level under controlled reaction conditions are key to understanding the catalyst structural evolution and atomic scale reaction mechanisms crucial to the performance and the development of improved catalysts and chemical processes. Increasingly, dynamic single atoms and atom clusters are believed to lead to enhanced catalyst performance, but despite considerable efforts, reaction mechanisms at the single atom level under reaction conditions of gas and temperature are not well understood. The development of the atomic lattice resolution environmental transmission electron microscope (ETEM) by the authors is widely used to visualize gas-solid catalyst reactions at this atomic level. It has recently been advanced to the environmental scanning TEM (ESTEM) with single atom resolution and full analytical capabilities. The ESTEM employs high-angle annular dark-field imaging where intensity is approximately proportional to the square of the atomic number (Z). In this Account, we highlight the ESTEM development also introduced by the authors for real time in situ studies to reliably discern metal atoms on lighter supports in gas and high temperature environments, evolving oxide/metal interfaces, and atomic level reaction mechanisms in heterogeneous catalysts more generally and informatively, with utilizing the wider body of literature. The highlights include platinum/carbon systems of interest in fuel cells to meet energy demands and reduce environmental pollution, in reduction/oxidation (redox) mechanisms of copper and nickel nanoparticles extensively employed in catalysis, electronics, and sensors, and in the activation of supported cobalt catalysts in Fischer-Tropsch (FT) synthesis to produce fuels. By following the dynamic reduction process at operating temperature, we investigate Pt atom migrations from irregular nanoparticles in a carbon supported platinum catalyst and the resulting faceting. We outline the factors that govern the mechanism involved, with the discovery of single atom interactions which indicate that a primary role of the nanoparticles is to act as reservoirs of low coordination atoms and clusters. This has important implications in supported nanoparticle catalysis and nanoparticle science. In copper and nickel systems, we track the oxidation front at the atomic level as it proceeds across a nanoparticle, by directly monitoring Z-contrast changes with time and temperature. Regeneration of deactivated catalysts is key to prolong catalyst life. We discuss and review analyses of dynamic redox cycles for the redispersion of nickel nanoparticles with single atom resolution. In the FT process, pretreatment of practical cobalt/silica catalysts reveals higher low-coordination Co⁰ active sites for CO adsorption. Collectively, the ESTEM findings generate structural insights into catalyst dynamics important in the development of efficient catalysts and processes.

Synergetic effect on catalytic activity and charge transfer in Pt-Pd bimetallic model catalysts prepared by atomic layer deposition

Pt-Pd bimetallic nanoparticles were synthesized on TiO₂ support on the planar substrate as well as on high surface area SiO₂ gel by atomic layer deposition to identify the catalytic performance improvement after the formation of Pt-Pd bimetallic nanoparticles by surface analysis techniques. From X-ray absorption near edge spectra of Pt-Pd bimetallic nanoparticles, d-orbital hybridization between Pt 5d and Pd 4d was observed, which is responsible for charge transfer from Pt to Pd. Moreover, it was found from the in situ grazing incidence X-ray absorption spectroscopy study that Pt-Pd nanoparticles have a Pd shell/Pt core structure with CO adsorption. Resonant photoemission spectroscopy on Pt-Pd bimetallic nanoparticles showed that Pd resonant intensity is enhanced compared to that of Pd monometallic nanoparticles because of d-orbital hybridization and electronic states broadening of Pt and Pd compared monometallic catalysts, which results in catalytic performance improvement.

A new silver cluster that emits bright-blue phosphorescence

A new stable hexanuclear silver(i) cluster features brightly blue phosphorescence at room temperature, which is integrated with yellow phosphors (YAG:Ce³⁺) to white-light-emission film and demonstrates interesting mechanoresponsive luminescence.

Novel covalent organic nanosheets for the construction of ultrafine and well-dispersed metal nanoparticles

CON–DAI–TFP, a pyrazole-functionalized nanosheet structure, demonstrates an efficient strategy for the synthesis of ultrafine, highly dispersed, and high loading U-MNPs, which are urgently needed in industrial and laboratory catalysis.

Mechanistic insights into the selective oxidation of 5-(hydroxymethyl)furfural over silver-based catalysts

Silver-catalyzed oxidation of 5-(hydroxymethyl)furfural (HMF) to 5-hydroxymethyl-2-furancarboxylic acid (HFCA) was investigated using in situ X-ray absorption spectroscopy under reaction conditions over Ag/ZrO₂ and Ag/TiO₂ catalysts.

A DFT and microkinetic study of propylene oxide selectivity over copper-based catalysts: effects of copper valence states

The development of high-performance copper-based catalysts is critical for the selective oxidation of propylene in both technology and scientific fields.

Identification of an AgS2 Complex on Ag(110)

Adsorbed sulfur has been investigated on the Ag(110) surface at two different coverages, 0.02 and 0.25 monolayers. At the lower coverage, only sulfur adatoms are present. At the higher coverage, there are additional bright features which we identify as linear, independent AgS₂ complexes. This identification is based upon density functional theory (DFT) and its comparison with experimental observations including bias dependence and separation between complexes. DFT also predicts the absence of AgS₂ complexes at low coverage, and the development of AgS₂ complexes around a coverage of 0.25 monolayers of sulfur, as is experimentally observed. To our knowledge, this is the first example of an isolated linear sulfur-metal-sulfur complex.

Low-Temperature Catalytic NO Reduction with CO by Subnanometric Pt Clusters

The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140–200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (∼2 nm), the oxidation of CO to CO₂ occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance.

Atomic- and Molecular-Level Design of Functional Metal-Organic Frameworks (MOFs) and Derivatives for Energy and Environmental Applications

Continuing population growth and accelerated fossil-fuel consumption with recent technological advancements have engendered energy and environmental concerns, urging researchers to develop advanced functional materials to overcome the associated problems. Metal-organic frameworks (MOFs) have emerged as frontier materials due to their unique porous organic-inorganic hybrid periodic assembly and exceptional diversity in structural properties and chemical functionalities. In particular, the modular nature and modularity-dependent activity of MOFs and MOF derivatives have accentuated the delicate atomic- and molecular design and synthesis of MOFs, and their meticulous conversion into carbons and transition-metal-based materials. Synthetic control over framework architecture, content, and reactivity has led to unprecedented merits relevant to various energy and environmental applications. Herein, an overview of the atomic- and molecular-design strategies of MOFs to realize application-targeted properties is provided. Recent progress on the development of MOFs and MOF derivatives based on these strategies, along with their performance, is summarized with a special emphasis on design-structure and functionality-activity relationships. Next, the respective energy- and environmental-related applications of catalysis and energy storage, as well as gas storage-separation and water harvesting with close association to the energy-water-environment nexus are highlighted. Last, perspectives on current challenges and recommendations for further development of MOF-based materials are also discussed.

Effect of atomicity on the oxidation of cationic copper clusters studied using thermal desorption spectrometry

The resistivity to oxidation of small copper clusters, Cun+ (n ≤ 5), in the gas phase with a precise atomicity at the molecular level was investigated using a combination of thermal desorption spectrometry and mass spectrometry. Oxide clusters, CunOm+, with more O atoms than those present with a stoichiometry of n : m = 1 : 1 were produced at room temperature in the presence of O2, and the weakly bound excess oxygen atoms involved in the clusters were removed by post heating. Non-oxidized Cu2+ and Cu3+ clusters were formed in the range of 323-923 K, whereas partially oxidized clusters, Cu4O2+ and Cu5O2+, were generated for n = 4 and 5. Considering the fact that CunOm+ (m = n/2 + 1) tends to be generated for n ≥ 6, the small copper clusters were concluded to be resistive to oxidation. The possible reaction paths for the oxidation of Cu2+ and Cu4+ clusters were obtained by density functional calculations, which were consistent with the experimental findings. The oxidation states of the Cu atoms in the clusters were discussed based on the natural charges of the atoms.

Graphdiyne and its Assembly Architectures: Synthesis, Functionalization, and Applications

Graphdiyne (GDY), a novel one-atom-thick carbon allotrope that features assembled layers of sp- and sp² -hybridized carbon atoms, has attracted great interest from both science and industry due to its unique and fascinating structural, physical, and chemical properties. GDY-based materials with different morphologies, such as nanowires, nanotube arrays, nanosheets, and ordered stripe arrays, have been applied in various areas such as catalysis, solar cells, energy storage, and optoelectronic devices. After an introduction to the fundamental properties of GDY, recent advances in the fabrication of GDY-based nanostructures and their applications, and corresponding mechanisms, are covered, and future critical perspectives are also discussed.

Frontiers and progress in cation-uptake and exchange chemistry of polyoxometalate-based compounds

Cation-uptake and exchange has been an important topic in both basic and applied chemistry relevant to life and materials science. For example, living cells contain appreciable amounts of Na+ and K+, and their concentrations are regulated by the sodium-potassium pump. Solid-state cation-exchangers such as clays and zeolites both natural and synthetic have been used widely in water softening and purification, separation of metal ions and biomolecules, etc. Polyoxometalates (POMs) are robust, discrete, and structurally well-defined metal-oxide cluster anions, and have stimulated research in broad fields of sciences. In this perspective, cation-uptake and exchange in POM and POM-based compounds are categorized and reviewed in three groups: (i) POMs as inorganic crown ethers and cryptands, (ii) POM-based ionic solids as cation-exchangers, and (iii) reduction-induced cation-uptake in POM-based ionic solids, which is based on a feature of POMs that they are redox-active and multi-electron transfer occurs reversibly in multiple steps. This method can be utilized to synthesize mixed-valence metal clusters in metal ion-exchanged POM-based ionic solids.

Structure-Function Correlations in Sputter Deposited Gold/Fluorocarbon Multilayers for Tuning Optical Response

A new strategy to nanoengineer gold/fluorocarbon multilayer (ML) nanostructures is reported. We have investigated the morphological changes occurring at the metal-polymer interface in ML structures with varying volume fraction of gold (Au) and the kinetic growth aspect of the microscale properties of nano-sized Au in plasma polymer fluorocarbon (PPFC). Investigations were carried out at various temperatures and annealing times by means of grazing incidence small-angle and wide-angle X-ray scattering (GISAXS and GIWAXS). We have fabricated a series of MLs with varying volume fraction (0.12, 0.27, 0.38) of Au and bilayer periodicity in ML structure. They show an interesting granular structure consisting of nearly spherical nanoparticles within the polymer layer. The nanoparticle (NP) morphology changes due to the collective effects of NPs diffusion within ensembles in the in-plane vicinity and interlayer with increasing temperature. The in-plane NPs size distinctly increases with increasing temperature. The NPs become more spherical, thus reducing the surface energy. Linear growth of NPs with temperature and time shows diffusion-controlled growth of NPs in the ML structure. The structural stability of the multilayer is controlled by the volume ratio of the metal in polymer. At room temperature, UV-Vis shows a blue shift of the plasmon peak from 560 nm in ML Au/PTFE_1 to 437 nm in Au/PTFE_3. We have identified the fabrication and postdeposition annealing conditions to limit the local surface plasmon resonance (LSPR) shift from Δ λ L S P R = 180 nm (Au/PTFE_1) to Δ λ L S P R = 67 nm (Au/PTFE_3 ML)) and their optical response over a wide visible wavelength range. A variation in the dielectric constant of the polymer in presence of varying Au inclusion is found to be a possible factor affecting the LSPR frequency. Our findings may provide insights in nanoengineering of ML structure that can be useful to systematically control the growth of NPs in polymer matrix.

Gas-Phase Epoxidation of Propylene to Propylene Oxide on a Supported Catalyst Modified with Various Dopants

In the present study, the production of propylene oxide (PO) from propylene via gas-phase epoxidation was investigated using various catalysts. Although Ag is known to be a highly active catalyst for the epoxidation of ethylene, it was not active in the present reaction. Both Al and Ti showed high levels of activity, however, which resulted in confusion. The present study was conducted to solve such confusion. Although the employment of MCM-41 modified with Ti and/or Al was reported as an active catalyst for epoxidation, the combination resulted in the formation of PO at a less than 0.1% yield. Since this research revealed that the acidic catalyst seemed favorable for the formation of PO, versions of ZSM-5 that were both undoped and doped with Na, Ti, and Ag were used as catalysts. In these cases, small improvements of 0.67% and 0.57% were achieved in the PO yield on H‒ZSM-5 and Ti‒ZSM-5, respectively. Based on the results of the Ti-dopant and acidic catalysts, Ag metal doped on carbonate species with a smaller surface area was used as a catalyst. As reported, Ag‒Na/CaCO3 showed a greater yield of PO at 1.29%. Furthermore, the use of SrCO3 for CaCO3 resulted in a further improvement in the PO yield to 2.17%. An experiment using CO2 and NH3 pulse together with SEM and TEM examinations for Ag‒Na/CaCO3 revealed that the greatest activity was the result of the greater particle size of metallic Ag rather than the acid‒base properties of the catalysts.

Ultrathin Metal-Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible-Light-Driven Photocatalytic H2 Evolution

A surfactant-stabilized coordination strategy is used to make two-dimensional (2D) single-atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre-formed single Pt atom coordinated porphyrin precursors into free-standing metal-organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF-based SACs. Remarkably, the 2D SACs exhibit a record-high photocatalytic H₂ evolution rate of 11 320 μmol g^-1  h^-1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF-based photocatalysts. Moreover, the MOF nanosheets can be readily drop-casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.

Nitrogen-Rich Porous Organic Polyamines for Stabilization of Highly Dispersed Metal Nanoparticles and Catalytic Application

Nitrogen-rich triazine-based porous organic polyamines (POPa) synthesized via a one-step polycondensation of melamine and 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde is employed to synthesize Au and Pd nanoparticles well-dispersed on POPa. The as-prepared POPa-supported Au NPs and Pd NPs (AuNPs@POPa, PdNPs@POPa) with a narrow size distribution show remarkable catalytic activity for the reduction of nitrobenzene compounds and organic dyes and the Suzuki-Miyaura coupling reaction, respectively. Benefitting from POPa the AuNPs@POPa and PdNPs@POPa catalysts can be readily recovered and reused almost without loss of activity. The nitrogen-rich porous organic polyamines provide great opportunities to prepare functional metal nanocatalysts with potential in the heterogeneous catalysis field.

Characterization of Nanoparticles: Advances

Over the past two decades, the unique properties of engineered nanoparticles (NPs) have placed them at the centre of revolutionary advancements in many sectors of science, technology and commerce. Multi-technique and multi-disciplinary analytical approaches are required to identify, quantify, and characterize the chemical composition, size and size distribution, surface properties and the number and concentration of NPs. In this chapter, an overview of the recent advances in the characterization of NPs will be presented.

Atom-by-Atom Resolution of Structure-Function Relations over Low-Nuclearity Metal Catalysts

Controlling the structure sensitivity of catalyzed reactions over metals is central to developing atom-efficient chemical processes. Approaching the minimum ensemble size, the properties enter a non-scalable regime in which each atom counts. Almost all trends in this ultra-small frontier derive from surface science approaches using model systems, because of both synthetic and analytical challenges. Exploiting the unique coordination chemistry of carbon nitride, we discriminate through experiments and simulations the interplay between the geometry, electronic structure, and reactivity of palladium atoms, dimers, and trimers. Catalytic tests evidence application-dependent requirements of the active ensemble. In the semi-hydrogenation of alkynes, the nuclearity primarily impacts activity, whereas the selectivity and stability are affected in Suzuki coupling. This powerful approach will provide practical insights into the design of heterogeneous catalysts comprising well-defined numbers of atoms.