Mechanical properties of L929 cells measured by atomic force microscopy: effects of anticytoskeletal drugs and membrane crosslinking

Drastic change of local stiffness distribution correlating to cell migration in living fibroblasts

Sequential images of the local stiffness distribution of living fibroblasts (NIH3T3) were captured under a culture condition using scanning probe microscopy in a force modulation mode. We found a clear relation between cell migration and local stiffness distribution on the cell: When cells were stationary at one position, the stiffness distribution of their cellular surface was quite stable. On the other hand, once the cells started to move, the stiffness in their nuclear regions drastically decreased. Possible explanations for the correlation between the cell migration and the cell stiffness are proposed.

Voltage-induced membrane movement

Thermodynamics predicts that transmembrane voltage modulates membrane tension and that this will cause movement. The magnitude and polarity of movement is governed by cell stiffness and surface potentials. Here we confirm these predictions using the atomic force microscope to dynamically follow the movement of voltage-clamped HEK293 cells in different ionic-strength solutions. In normal saline, depolarization caused an outward movement, and at low ionic strength an inward movement. The amplitude was proportional to voltage (about 1 nm per 100 mV) and increased with indentation depth. A simple physical model of the membrane and tip provided an estimate of the external and internal surface charge densities (-5 x 10(-3) C x m(-2) and -18 x 10(-3) C x m(-2), respectively). Salicylate (a negative amphiphile) inhibited electromotility by increasing the external charge density by -15 x 10(-3) C x m(-2). As salicylate blocks electromotility in cochlear outer hair cells at the same concentration, the role of prestin as a motor protein may need to be reassessed.

The effect of chitosan on stiffness and glycolytic activity of human bladder cells

The cell's cytoskeleton together with the cell membrane and numerous accessory proteins determines the mechanical properties of cell. Any factors influencing cell organization and structure can cause alterations in mechanical properties of cell (its ability for deformation and adhesion). The determination of the local elastic properties of cells in their culture conditions has opened the possibility for the measurement of the influence of different factors on the mechanical properties of the living cells. The effect of the chitosan on the stiffness of the non-malignant transitional epithelial cells of ureter (HCV 29) and the transitional cell cancer of urine bladder (T24) was determined using scanning force microscopy. The investigations were performed in the culture medium (RPMI 1640) containing 10% fetal calf serum in the presence of the microcrystalline chitosan of the three different deacetylation degrees. In parallel, the effect of chitosan on production of lactate and ATP level was determined. The results showed the strong correlation between the decrease of the energy production and the increase in Young's modulus values obtained for the cancer cells treated with chitosan.

Atomic force microscopy can be used to mechanically stimulate osteoblasts and evaluate cellular strain distributions

In this study, atomic force microscopy (AFM) was used to mechanically stimulate primary osteoblasts. In response to mechanical force applied by the AFM, the indented cell increased its intracellular calcium concentration. The material properties of the cell could be estimated and the membrane strains calculated. We proceeded to validate this technique experimentally and a 20% error was found between the predicted and the measured diameter of indentation. We also determined the strain distributions within the cell that result from AFM indentation using a simple finite element model. This enabled us to formulate hypotheses as to the mechanism through which cells may sense the applied mechanical strains. Finally, we report the effect of the Poisson ratio and the cell thickness on the strain distributions. Varying the Poisson ratio did not change the order of magnitude of the strains; whereas the cellular thickness dramatically changed the order of magnitude of the cellular strains. We conclude that AFM can be used for controlled mechanical stimulation of osteoblasts and that cellular strain distributions can be computed with a good accuracy when the cell is indented in its highest part.

Elasticity mapping of living fibroblasts by AFM and immunofluorescence observation of the cytoskeleton

Using the force mapping mode of atomic force microscopy (AFM), we measured spatial distribution of elastic moduli of living mouse fibroblasts (NIH3T3) in a physiological condition. The nuclear portion of the cellular surface is about 10 times softer than the surroundings. Stiffer fibers are confirmed in the elastic images. In order to investigate origin of the softer nuclear portion and the stiffer fibers, we fixed the identical cells imaged by the AFM, and carried out immunofluorescence observation for three types of cytoskeletal filaments--actin filaments, microtubules, and intermediate filaments, using confocal laser scanning microscopy (CLSM). A comparison between the AFM and the CLSM images revealed that the elasticity of the cells was concerned not only with the distribution of actin network, but also with intermediate filaments, whereas microtubules had no large effect on the measured elasticity.

Effect of streptolysin O on the microelasticity of human platelets analyzed by atomic force microscopy

Atomic force microscopy (AFM) has been shown to be a suitable tool to probe biophysical properties of cells and cell fragments. We analysed biophysical alterations of human platelets by AFM using streptolysin O (SLO) as a model for pore forming proteins. Permeabilization of platelet membrane by SLO was confirmed by transmission electron and confocal microscopy. Using force volume imaging combined with FIEL analysis we were able to show dynamically the increase in the elasticity of platelets during the pore formation by SLO and could correlate the viscoelasticity to the morphology of platelets. Stabilizing the actin cytoskeleton by phalloidin resulted in partial restoration of the elasticity indicating that loss of stability in platelets by SLO is mediated by alterations of both plasma membrane and cytoskeleton.

Imaging and force-distance analysis of human fibroblasts in vitro by atomic force microscopy

The structure of human fibroblasts have been characterised in vitro by atomic force microscopy (AFM) operated in the imaging or in the force versus distance (F-d) modes. The choice of cell substrate is important to ensure good adhesion. Of greater significance in the context of AFM analysis, is the observation that the substrate affects the imaging conditions for in vitro analysis of live cells. For instance, very rarely will glass coverslips lead to acceptable outcomes (i.e., resolved cytoskeletal structure). Activated tissue culture dishes, on the other hand, promote conditions that routinely result in good quality images. Those conditions are then unaffected by adoption of relatively high force loadings (more than 10 nN), large fields of view (100 x 100 microm2) and high scan speeds (up to ca. 200 microm/sec), all of which exceed values recommended in the literature. Plasma membranes are fragile in the context of AFM analysis (F-d analysis gives an equivalent Young's Modulus of ca. 5 kPa). However, the present work suggests that fragility per se need not be a problem, rather it is the adhesive interactions with the tip, which under some circumstances may exceed 20 nN, that are the source of poor imaging conditions. The present results, being supported by a qualitative model, suggest that the activated substrate acts as a preferential scavenger of cellular debris thus preventing the tip from biofouling, and will therefore promote low adhesion between tip and membrane. Good imaging conditions provide non-destructive in vitro information about cytoskeletal structure and dynamics, as shown in two examples concerned with cytochalasin treatment and with the MTT assay.