Nanoprecipitation and the "Ouzo effect": Application to drug delivery devices

Stable Colloidal Drug Aggregates Catch and Release Active Enzymes

Small molecule aggregates are considered nuisance compounds in drug discovery, but their unusual properties as colloids could be exploited to form stable vehicles to preserve protein activity. We investigated the coaggregation of seven molecules chosen because they had been previously intensely studied as colloidal aggregators, coformulating them with bis-azo dyes. The coformulation reduced colloid sizes to <100 nm and improved uniformity of the particle size distribution. The new colloid formulations are more stable than previous aggregator particles. Specifically, coaggregation of Congo Red with sorafenib, tetraiodophenolphthalein (TIPT), or vemurafenib produced particles that are stable in solutions of high ionic strength and high protein concentrations. Like traditional, single compound colloidal aggregates, the stabilized colloids adsorbed and inhibited enzymes like β-lactamase, malate dehydrogenase, and trypsin. Unlike traditional aggregates, the coformulated colloid-protein particles could be centrifuged and resuspended multiple times, and from resuspended particles, active trypsin could be released up to 72 h after adsorption. Unexpectedly, the stable colloidal formulations can sequester, stabilize, and isolate enzymes by spin-down, resuspension, and release.

Stable, polymer-directed and SPION-nucleated magnetic amphiphilic block copolymer nanoprecipitates with readily reversible assembly in magnetic fields

The formation of inorganic-organic magnetic nanocomposites using reactive chemistry often leads to a loss of super-paramagnetisim when conducted in the presence of iron oxide nanoparticles. We present here a low energy and chemically-mild process of co-nanoprecipitation using SPIONs and homopolymers or amphiphilic block copolymers, of varying architecture and hydrophilic/hydrophobic balance, which efficiently generates near monodisperse SPION-containing polymer nanoparticles with complete retention of magnetism, and highly reversible aggregation and redispersion behaviour. When linear and branched block copolymers with inherent water-solubility are used, a SPION-directed nanoprecipitation mechanism appears to dominate the nanoparticle formation presenting new opportunities for tailoring and scaling highly functional systems for a range of applications.

Fluorescent Polymer Nanoparticles Based on Dyes: Seeking Brighter Tools for Bioimaging

Speed, resolution and sensitivity of today's fluorescence bioimaging can be drastically improved by fluorescent nanoparticles (NPs) that are many-fold brighter than organic dyes and fluorescent proteins. While the field is currently dominated by inorganic NPs, notably quantum dots (QDs), fluorescent polymer NPs encapsulating large quantities of dyes (dye-loaded NPs) have emerged recently as an attractive alternative. These new nanomaterials, inspired from the fields of polymeric drug delivery vehicles and advanced fluorophores, can combine superior brightness with biodegradability and low toxicity. Here, we describe the strategies for synthesis of dye-loaded polymer NPs by emulsion polymerization and assembly of pre-formed polymers. Superior brightness requires strong dye loading without aggregation-caused quenching (ACQ). Only recently several strategies of dye design were proposed to overcome ACQ in polymer NPs: aggregation induced emission (AIE), dye modification with bulky side groups and use of bulky hydrophobic counterions. The resulting NPs now surpass the brightness of QDs by ≈10-fold for a comparable size, and have started reaching the level of the brightest conjugated polymer NPs. Other properties, notably photostability, color, blinking, as well as particle size and surface chemistry are also systematically analyzed. Finally, major and emerging applications of dye-loaded NPs for in vitro and in vivo imaging are reviewed.

Silica Ouzo Effect: Amphiphilic Drugs Facilitate Nanoprecipitation of Polycondensed Mercaptosilanes

Amphiphilic drugs are therapeutic agents whose molecular structures contain both hydrophobic and hydrophilic portions. Here we report a systematic study on how amphiphilic drugs can assist in silica nanoprecipitation. 3-Mercaptopropyltrimethoxysilane (MPTMS) was used as the sole silica material and 12 amphiphilic drugs spanning a wide spectrum of therapeutic categories were included. MPTMS polycondensation was conducted in a DMSO-based organic phase. After a sufficient time, particle formation was induced by injecting a small amount of the organic phase into a water solution containing various amphiphiles. The results show that all amphiphilic drugs studied exerted concentration-dependent facilitating effect on nanoparticle formation. Under certain preparation conditions, the particle solution showed physical stability over a long period and the formed particles could be as small as 100 nm. By systematically varying drug concentrations and injection volumes, the ability of each amphiphile to promote nanoprecipitation can be quantified and compared, based on two novel indices: the area under the critical volume-concentration curve (AUC) and the critical stabilization concentration (CSC). We demonstrate that both ability indices significantly correlated with the drug's log P and critical micelle concentrations (CMC). Furthermore, we have optimized the aging and particle purification condition and extensively characterized our system through comprehensive TEM and zeta-potential measurements, as well as determinations for drug entrapment and release. In conclusion, we have established a quantitative structure-activity relationship for amphiphilic small-molecular drugs in their ability to interact with poly(mercaptopropyl)silsesquioxane species and form nanoparticles via solvent shifting. We speculate that both hydrophobic and electrostatic interactions play important roles in the formation and stabilization of nanoparticles.

Star-shape paclitaxel prodrug self-assembled nanomedicine: combining high drug loading and enhanced cytotoxicity

Star-shape paclitaxel prodrugs self-assembled nanoparticles combining high drug loading and enhanced cytotoxicity.

Role of highly branched, high molecular weight polymer structures in directing uniform polymer particle formation during nanoprecipitation

The presence of highly branched polymers with >100 conjoined primary chains is shown to induce a novel rapid nucleation and growth mechanism within polymer nanoprecipitation yielding functional, uniform nanoparticles without stabilisers, filtration or rapid mixing techniques.

Surfactant-free preparation of highly stable zwitterionic poly(amido amine) nanogels with minimal cytotoxicity

Narrowly dispersed zwitterionic poly(amido amine) (PAA) nanogels with a diameter of approximately 100nm were prepared by a high-yielding and surfactant-free, inverse nanoprecipitation of PAA polymers. The resulting, negatively charged, nanogels (PAA-NG1) were functionalized with N,N-dimethylethylenediamine via EDC/NHS coupling chemistry. This resulted in nanogels with a positive surface charge (PAA-NG2). Both types of nanogels were fluorescently labelled via isothiocyanate coupling. PAA-NG1 displays high colloidal stability both in PBS and Fetal Bovine Serum solution. Moreover, both nanogels exhibit a distinct zwitterionic swelling profile in response to pH changes. Cellular uptake of FITC-labelled nanogels with RAW 264.7, PC-3 and COS-7 cells was evaluated by fluorescence microscopy. These studies showed that nanogel surface charge greatly influences nanogel-cell interactions. The PAA polymer and PAA-NG1 showed minimal cell toxicity as was evaluated by MTT assays. The findings reported here demonstrate that PAA nanogels possess interesting properties for future studies in both drug delivery and imaging.

STATEMENT OF SIGNIFICANCE

The use of polymeric nanoparticles in biomedical applications such as drug delivery and imaging, shows great potential for medical applications. However, these nanoparticles are often not stable in biological environments. Zwitterionic polymers have shown excellent biocompatibility, but these materials are not easily degradable in biological environments. With the aim of developing a nanoparticle for drug delivery and imaging we synthesized a biomimetic and readily biodegradable zwitterionic polymer, which was incorporated into nanogels. These nanogels showed excellent stability in the presence of serum and minimal cytotoxicity, which was tested in three cell lines. Because of their negative surface charge and excellent serum stability, these nanogels are therefore promising carriers for drug delivery and molecular imaging.

Method to disperse lipids as aggregates in oil for bilayers production

Several techniques to assemble artificial lipid bilayers involve the zipping of monolayers. Their efficiency is determined by the renewal of the saturated monolayers to be zipped and this proceeds by adsorption of lipids dispersed in oil as aggregates. The size of these lipids aggregates is a key parameter to ensure both the stability of the suspension and a fast release of lipids at the interface. We propose a new method inspired from the solvent-shifting nucleation process allowing to control and tune the lipid aggregates size and that improves the production of artificial membranes. It is simpler and faster than current methods starting from a dry lipid film, which are highly sensitive to environmental conditions. This method opens the route to bilayer production processes with new potentialities in membrane composition.

Antifungal ouzo nanoparticles from guar gum propionate

Synthesis of high DS guar gum propionate esters and the formation of self-assembly nanoparticles for fungus contact killing.

Validation of high performance liquid chromatography method for determination of meloxicam loaded PEGylated nanocapsules

abstract A method to ensure that an analytical method will produce reliable and interpretable information about the sample must first be validated, making sure that the results can be trusted and traced. In this study, we propose to validate an analytical high performance liquid chromatography (HPLC) method for the quantitation of meloxicam loaded PEGylated nanocapsules(M-PEGNC). We performed a validation study, evaluated parameters including specificity, linearity, quantification limit, detection limit, accuracy, precision and robustness. PEGylated nanocapsules were prepared by interfacial deposition of preformed polymer, and the particle size, polydispersity index, zeta potential, pH value and encapsulation efficiency were characterized. The proposed HPLC method provides selective, linear results in the range of 1.0-40.0 μg/mL; quantification and detection limits were 1.78 μg/mL and 0.59 μg/mL, respectively; relative standard deviation for repeatability was 1.35% and intermediate precision was 0.41% and 0.61% for analyst 1 and analyst 2, respectively; accuracy between 99.23 and 101.79%; robustness between 97.13 and 98.45% for the quantification of M-PEGNC. Mean particle diameters were 261 ± 13 nm and 249 ± 20 nm, polydispersity index was 0.15 ± 0.07 and 0.17 ± 0.06, pH values were 5.0 ± 0.2 and 5.2 ± 0.1, and zeta-potential values were -37.9 ± 3.2 mV e -31.8 ± 2.8 mV for M-PEGNC and placebo(B-PEGNC), respectively. In conclusion, the proposed analytical method is suitable for the quality control of M-PEGNC. Moreover, suspensions showed monomodal size distributions and low polydispersity index indicating high homogeneity of formulations with narrow size distributions, and appropriate pH and zeta potential. The extraction process was efficient for release of meloxicam from nanostructured systems.

Solvent Effects on the Formation of Surface Nanodroplets by Solvent Exchange

Solvent exchange is a simple process to form oil nanodroplets at solid-liquid interfaces with well-defined location and morphology. In this process, a good solvent of the oil is displaced by a poor solvent, leading to the nucleation and growth of oil droplets from a transient oversaturation at the mixing front. Our recent work has shown that the final volume of the droplets is related to the flow conditions. In this work, we investigate the effects of the type and the composition of solvents on the droplet formation under the same flow conditions. Water nanodroplets were produced by ethanol/cyclohexane (solution A) and cyclohexane (solution B) on a hydrophilic substrate. We found that the droplet size increases first and then decreases with an increase of the initial ethanol concentration in solution A. This is attributed to the phase separation of ethanol-cyclohexane-water; in particular, the composition of solution A on the phase boundary above the Ouzo region. The same reason also contributes to the lower efficiency in droplet formation for a longer alkane. The important implication from this work is that the maximal droplet volume is limited by the phase separation of the solvents used in the solvent exchange.

Nanoprecipitation and Spectroscopic Characterization of Curcumin-Encapsulated Polyester Nanoparticles

Curcumin-encapsulated polyester nanoparticles (Cur-polyester NPs) of approximately 100 nm diameter with a negatively charged surface were prepared using a one-step nanoprecipitation method. The Cur-polyester NPs were prepared using polylactic acid, poly(D,L-lactic-co-glycolic acid) and poly(ϵ-caprolactone) without any emulsifier or surfactant. The encapsulation of curcumin in these polyester NPs greatly suppresses curcumin degradation in the aqueous environment due to its segregation from water. In addition, the fluorescence of curcumin in polyester NPs has a quantum yield of 4 to 5%, which is higher than that of curcumin in micellar systems and comparable to those in organic solvents, further supporting the idea that the polyester NPs are capable of excluding water from curcumin. Furthermore, the results from femtosecond fluorescence upconversion spectroscopy reveal that there is a decrease in the signal amplitude corresponding to solvent reorganization of excited state curcumin in the polyester NPs compared with curcumin in micellar systems. The Cur-polyester NPs also show a lack of deuterium isotope effect in the fluorescence lifetime. These results indicate that the interaction between curcumin and water in the polyester NPs is significantly weaker than that in micelles. Therefore, the aqueous stability of curcumin is greatly improved due to highly effective segregation from water. The overall outcome suggests that the polyester NPs prepared using the method reported herein are an attractive system for encapsulating and stabilizing curcumin in the aqueous environment.

One-pot synthesis of PEGylated plasmonic MoO(3-x) hollow nanospheres for photoacoustic imaging guided chemo-photothermal combinational therapy of cancer

Engineering design of plasmonic nanomaterials as on-demand theranostic nanoagents with imaging, drug carrier, and photothermal therapy (PTT) functions have profound impact on treatment of cancer. Here, a facile 'one-pot' template-free hydrothermal route was firstly developed for synthesis of plasmonic oxygen deficiency molybdenum oxide hollow nanospheres functionalized by poly(ethylene glycol) (PEG-MoO(3-x) HNSs). The as-prepared PEG-MoO(3-x) HNSs not only have good biocompatibility but also exhibit obvious localized surface plasmon resonance (LSPR) absorption in the near-infrared (NIR) region. Especially, due to its intrinsic mesoporous properties and effective photothermal conversion efficiency upon 808-nm NIR laser irradiation, the PEG-MoO(3-x) HNSs can be applied as a pH/NIR laser dual-responsive camptothecin (CPT) drug delivery nanoplatform for chemotherapy as well as PTT to cancer cells. A remarkably improved synergistic therapeutic effect to pancreatic (PANC-1) tumor-bearing mice was obtained compared to the result of chemotherapy or PTT alone. Apart from its application for drug delivery, the PEG-MoO(3-x) HNSs can also be employed as an effective contrast nanoagent for photoacoustic (PAT) imaging because of its high NIR absorption, making it promising as a theranostic nanoagent for PAT imaging-guided chemo-photothermal combinational cancer therapy in the nanomedicine field.

An efficient system for intracellular delivery of beta-lactam antibiotics to overcome bacterial resistance

The "Golden era" of antibiotics is definitely an old story and this is especially true for intracellular bacterial infections. The poor intracellular bioavailability of antibiotics reduces the efficency of many treatments and thereby promotes resistances. Therefore, the development of nanodevices coupled with antibiotics that are capable of targeting and releasing the drug into the infected-cells appears to be a promising solution to circumvent these complications. Here, we took advantage of two natural terpenes (farnesyl and geranyl) to design nanodevices for an efficient intracellular delivery of penicillin G. The covalent linkage between the terpene moieties and the antibiotic leads to formation of prodrugs that self-assemble to form nanoparticles with a high drug payload between 55-63%. Futhermore, the addition of an environmentally-sensitive bond between the antibiotic and the terpene led to an efficient antibacterial activity against the intracellular pathogen Staphylococcus aureus with reduced intracellular replication of about 99.9% compared to untreated infected cells. Using HPLC analysis, we demonstrated and quantified the intracellular release of PenG when this sensitive-bond (SB) was present on the prodrug, showing the success of this technology to deliver antibiotics directly into cells.

Influence of the nanoprecipitation conditions on the supramolecular structure of squalenoyled nanoparticles

Hydrophobic organic compounds dissolved in a polar solvent can self-assemble into nanoparticles (NPs) upon nanoprecipitation into water. In the present study, we have investigated the structure of squalenacetyl-adenosine (SQAc-Ad) nanoparticles which were previously found to exhibit impressive neuroprotective activity. When obtained by nanoprecipitation of a SQAc-Ad ethanolic solution into water, two different supramolecular organizations of SQAc-Ad NPs were evidenced, depending on the water-to-ethanol volume ratio. It has been shown that a fraction of the solvent remained associated with the NPs, despite prolonged evaporation under reduced pressure after nanoprecipitation, and that this residual solvent dramatically affected their structure. This study points to the importance of being in the "Ouzo" region to minimize the amount and effect of residual solvent and to control the structure of NPs.

Formation of surface nanodroplets under controlled flow conditions

Nanodroplets on a solid surface (i.e., surface nanodroplets) have practical implications for high-throughput chemical and biological analysis, lubrications, laboratory-on-chip devices, and near-field imaging techniques. Oil nanodroplets can be produced on a solid-liquid interface in a simple step of solvent exchange in which a good solvent of oil is displaced by a poor solvent. In this work, we experimentally and theoretically investigate the formation of nanodroplets by the solvent exchange process under well-controlled flow conditions. We find significant effects from the flow rate and the flow geometry on the droplet size. We develop a theoretical framework to account for these effects. The main idea is that the droplet nuclei are exposed to an oil oversaturation pulse during the exchange process. The analysis shows that the volume of the nanodroplets increases with the Peclet number Pe of the flow as ∝ Pe(3/4), which is in good agreement with our experimental results. In addition, at fixed flow rate and thus fixed Peclet number, larger and less homogeneously distributed droplets formed at less-narrow channels, due to convection effects originating from the density difference between the two solutions of the solvent exchange. The understanding from this work provides valuable guidelines for producing surface nanodroplets with desired sizes by controlling the flow conditions.

Drug nanosuspensions: a ZIP tool between traditional and innovative pharmaceutical formulations

INTRODUCTION

A nanosuspension or nanocrystal suspension is a versatile formulation combining conventional and innovative features. It comprises 100% pure drug nanoparticles with sizes in the nano-scale range, generally stabilized by surfactants or polymers. Nanosuspensions are usually obtained in liquid media with bottom-up and top-down methods or by their combination. They have been designed to enhance the solubility, the dissolution rate and the bioavailability of drugs via various administration routes. Due to their small sizes, nanosuspensions can be also considered a drug delivery nanotechnology for the preparation of nanomedicine products.

AREAS COVERED

This review focuses on the state of the art of the nanocrystal-based formulation. It describes theory characteristics, design parameters, preparation methods, stability issues, as well as specific in vivo applications. Innovative strategies proposed to obtain nanomedicine formulation using nanocrystals are also reported.

EXPERT OPINION

Many drug nanodelivery systems have been developed to increase the bioavailability of drugs and to decrease adverse side effects, but few can be industrially manufactured. Nanocrystals can close this gap by combining traditional and innovative drug formulations. Indeed, they can be used in many pharmaceutical dosage forms as such, or developed as new nano-scaled products. Engineered surface nanocrystals have recently been proposed as a dual strategy for stability enhancement and targeting delivery of nanocrystals.

Solvent selection causes remarkable shifts of the "Ouzo region" for poly(lactide-co-glycolide) nanoparticles prepared by nanoprecipitation

Polymer nanoparticles (NPs) offer versatile novel biological features of interest for drug delivery applications. "Ouzo diagrams" allowed for a systematic manufacture of specified colloidal formulations by the widely used nanoprecipitation process. Surprisingly, despite the well-documented relevance of the applied organic solvent for nanoprecipitation, its effect on the actual status of the "Ouzo region" was so far not studied. Herein, investigations were undertaken to account for the potential impact of the solvent type on the "Ouzo diagrams" for poly(lactide-co-glycolide) (PLGA) and tetrahydrofuran (THF), 1,4-dioxane, acetone and dimethyl sulfoxide (DMSO). The "Ouzo region" shifted considerably to higher polymer fractions upon solvent change (rank order: THF < 1,4-dioxane < acetone < DMSO). Assuming a one-to-one transformation of detached PLGA-bearing solvent droplets (droplet diameter for THF: ∼800 nm, 1,4-dioxane: ∼700 nm, acetone: ∼500 nm and DMSO: ∼300 nm) into non-divisible polymer aggregates upon solvent displacement, facilitated to predict the size of NPs found within the "Ouzo region" (size range: 40-200 nm). In conclusion, application of "Ouzo diagrams" is a valuable tool for drug delivery research and will most-likely replace the "trial-and-error"-approach to identify the operating window for the production of stable colloidal formulations by the nanoprecipitation technique.

Design attributes of long-circulating polymeric drug delivery vehicles

Following systemic administration polymeric drug delivery vehicles allow for a controlled and targeted release of the encapsulated medication at the desired site of action. For an elevated and organ specific accumulation of their cargo, nanocarriers need to avoid opsonization, activation of the complement system and uptake by macrophages of the mononuclear phagocyte system. In this respect, camouflaged vehicles revealed a delayed elimination from systemic circulation and an improved target organ deposition. For instance, a steric shielding of the carrier surface by poly(ethylene glycol) substantially decreased interactions with the biological environment. However, recent studies disclosed possible deficits of this approach, where most notably, poly(ethylene glycol)-modified drug delivery vehicles caused significant immune responses. At present, identification of novel potential carrier coating strategies facilitating negligible immune reactions is an emerging field of interest in drug delivery research. Moreover, physical carrier properties including geometry and elasticity seem to be very promising design attributes to surpass numerous biological barriers, in order to improve the efficacy of the delivered medication.

Polymer directed self-assembly of pH-responsive antioxidant nanoparticles

We have developed pH-responsive, multifunctional nanoparticles based on encapsulation of an antioxidant, tannic acid (TA), using flash nanoprecipitation, a polymer directed self-assembly method. Formation of insoluble coordination complexes of tannic acid and iron during mixing drives nanoparticle assembly. Tuning the core material to polymer ratio, the size of the nanoparticles can be readily tuned between 50 and 265 nm. The resulting nanoparticle is pH-responsive, i.e., stable at pH 7.4 and soluble under acidic conditions due to the nature of the coordination complex. Further, the coordination complex can be coprecipitated with other hydrophobic materials such as therapeutics or imaging agents. For example, coprecipitation with a hydrophobic fluorescent dye creates fluorescent nanoparticles. In vitro, the nanoparticles have low cytotoxicity and show antioxidant activity. Therefore, these particles may facilitate intracellular delivery of antioxidants.

New biomaterials from renewable resources – amphiphilic block copolymers from δ-decalactone

Polymers for drug delivery applications have been synthesised via environmentally benign routes and with sustainable feedstocks.

Aggregation behaviours and bactericidal activities of novel cationic surfactants functionalized with amides and ether groups

Novel cationic surfactants exhibit high surface activity, interesting aggregation behaviors in aqueous solution and excellent bacterial activity.

One-pot synthesis of doxorubicin-loaded multiresponsive nanogels based on hyperbranched polyglycerol

Doxorubicin-loaded nanogels with multiresponsive properties are prepared in a single step using hyperbranched polyglycerol as a biocompatible scaffold.

From nanodroplets by the ouzo effect to interfacial nanolenses

Polymerizing nanodroplets at solid-liquid interfaces is a facile solution-based approach to the functionalization of large surface areas with polymeric lens-shaped nanostructures. In this work, we have applied a one-pot approach to obtain polymeric nanolenses with controlled sizes and densities. We take advantage of the formation mechanism by the direct adsorption of nanodroplets from a surfactant-free microemulsion onto an immersed hydrophobic substrate. The interfacial nanodroplets were photopolymerized to produce polymeric nanolenses on the substrate surface. The surfactant-free microemulsion of the monomer nanodroplets was obtained through the spontaneous emulsification (i.e., ouzo effect) in the tertiary system of ethanol, water, and precusor monomer. The size of nanolenses on the surface was adjusted by the nanodroplet size, following a linear relationship with the ratio of the components in the microemulsion. This simple approach is applicable to produce nanolenses over the entire surface area or on any specific area at will by depositing a drop of the microemulsion. Possessing high optical transparency, the resulting substrates may have potential application as functional biomedical supporting materials or effective light-harvesting coatings.

Versatile synthesis of thiol- and amine-bifunctionalized silica nanoparticles based on the ouzo effect

In this article, we report a novel, nanoprecipitation-based method for preparing silica nanoparticles with thiol and amine cofunctionalization. (3-Mercaptopropyl)trimethoxysilane (MPTMS) and 3-aminopropyltrimethoxysilane (APTMS) were used as the organosilane precursors, which were subjected to acid-catalyzed polycondensation in an organic phase containing a water-miscible solvent (e.g., dimethyl sulfoxide). A pale colloidal solution could be immediately formed when the preincubated organic phase was directly injected into water. The initial composition ratio between MPTMS and APTMS is an important factor governing the formation of nanoparticles. Specifically, large, unstable micrometer-sized particles were formed for preparation using MPTMS as the sole silane source. In contrast, when APTMS was used alone, no particles could be formed. By reducing the fraction of APTMS (or increasing that of MPTMS) in the initial mixture of organosilanes, the formation of nanometer-sized particles occurred at a critical fraction of APTMS (i.e., 25%). Remarkably, a tiny fraction (e.g., 1%) of APTMS was sufficient to produce stable nanoparticles with a hydrodynamic diameter of about 200 nm. Other factors that would also affect particle formation were determined. Moreover, an interesting temperature effect on particle formation was observed. The TEM micrographs show spherical nanospheres with mean sizes of 130-150 nm in diameter. The solid-state (29)Si NMR spectra demonstrate that the hybrid silica materials contain fully and partially condensed silicon structures. The bifunctionalized silica nanoparticles have positive zeta potentials whose magnitudes are positively correlated with the amount of APTMS. The total thiol content, however, is negatively correlated with the amount of APTMS. The cationic nanoparticles can bind an antisense oligonucleotide in a composition-dependent manner.

Positron emission tomography image-guided drug delivery: current status and future perspectives

Positron emission tomography (PET) is an important modality in the field of molecular imaging, which is gradually impacting patient care by providing safe, fast, and reliable techniques that help to alter the course of patient care by revealing invasive, de facto procedures to be unnecessary or rendering them obsolete. Also, PET provides a key connection between the molecular mechanisms involved in the pathophysiology of disease and the according targeted therapies. Recently, PET imaging is also gaining ground in the field of drug delivery. Current drug delivery research is focused on developing novel drug delivery systems with emphasis on precise targeting, accurate dose delivery, and minimal toxicity in order to achieve maximum therapeutic efficacy. At the intersection between PET imaging and controlled drug delivery, interest has grown in combining both these paradigms into clinically effective formulations. PET image-guided drug delivery has great potential to revolutionize patient care by in vivo assessment of drug biodistribution and accumulation at the target site and real-time monitoring of the therapeutic outcome. The expected end point of this approach is to provide fundamental support for the optimization of innovative diagnostic and therapeutic strategies that could contribute to emerging concepts in the field of “personalized medicine”. This review focuses on the recent developments in PET image-guided drug delivery and discusses intriguing opportunities for future development. The preclinical data reported to date are quite promising, and it is evident that such strategies in cancer management hold promise for clinically translatable advances that can positively impact the overall diagnostic and therapeutic processes and result in enhanced quality of life for cancer patients.