Continuing differentiation of human mesenchymal stem cells and induced chondrogenic and osteogenic lineages in electrospun PLGA nanofiber scaffold

Porcine tooth germ cell conditioned medium can induce odontogenic differentiation of human dental pulp stem cells

It is suggested that the differentiation of tooth-derived stem cells is modulated by the local microenvironment in which they reside. Previous studies have indicated that tooth germ cell-conditioned medium (TGC-CM) holds the potential to induce dental pulp stem cells (DPSCs) to differentiate into the odontogenic lineage. Nevertheless, human TGC-CM (hTGC-CM) is not feasible in practical application, so we conjectured that xenogenic TGC-CM might exert a similar influence on human dental stem cells. In this study, we chose swine as the xenogenic origin and compared the effect of porcine tooth germ cell-conditioned medium (pTGC-CM) with its human counterpart on human DPSCs. Morphological appearance, colony-forming assay, in vitro multipotential ability, protein and gene expression of the odontogenic phenotype and the in vivo differentiation capacity of DPSCs were evaluated. The results showed that pTGC-CM exerted a similar effect to hTGC-CM in inducing human DPSCs to present odontogenic changes, which were indicated by remarkable morphological changes, higher multipotential capability and the expression of some odontogenic markers in gene and protein levels. Besides, the in vivo results showed that pTGC-CM-treated DPSCs, similar to hTGC-CM-treated DPSCs, could form a more regular dentine-pulp complex. Our data provided the first evidence that pTGC-CM is able to exert almost the same effect on DPSCs with hTGC-CM. The observations suggest that the application of xenogenic TGC-CM may facilitate generating bioengineered teeth from tooth-derived stem cells in future.

Control of osteogenic differentiation and mineralization of human mesenchymal stem cells on composite nanofibers containing poly[lactic-co-(glycolic acid)] and hydroxyapatite

We fabricated composite fibrous scaffolds from blends of poly(lactide-co-glycolide) (PLGA) and nano-sized hydroxyapatite (HA) via electrospinning. SEM-EDX and AFM analysis demonstrated that HA was homogeneously dispersed in the nanofibers, and the roughness increased along with the amount of incorporated HA. When hMSCs were cultured on these PLGA/HA composite nanofibers, we found that incorporation of HA on the nanofibers did not affect cell viability whereas increased ALP activity and expression of osteogenic genes as well as the calcium mineralization of hMSCs. Our results indicate that the composite nanofibers can be offered as a potential bone regenerative biomaterial for stem cell based therapies.

Polymer nanofibrous structures: Fabrication, biofunctionalization, and cell interactions

Extracellular matrix fibers (ECM) such as collagen, elastin, and keratin provide biological and physical support for cell attachment, proliferation, migration, differentiation and ultimately cell fate. Therefore, ECM fibers are an important component in tissue and organ development and regeneration. Meanwhile, polymer nanofibers could play the same critical role in tissue regeneration process. Fibrous structures can be fabricated from a variety of materials and methods with diameters ranging throughout the size scale where cells can sense individual fibers (several nanometers to several microns). Polymer nanofiber scaffolds can be designed in a way that predictably modulates a variety of important cell behaviors towards a desired overall function. The nanofibrous topography itself, independent of the fiber material, has demonstrated the potential to modulate cell behaviors desirable in tissue engineering such as: unidirectional alignment; increased viability, attachment, and ECM production; guided migration; and controlled differentiation. The versatility of polymer nanofibers for functionalization with biomolecules opens the door to vast opportunities for the design of tissue engineering scaffolds with even greater control over cell incorporation and function. Despite the promise of polymer nanofibers as tissue engineering scaffolds there have been few clinically relevant successes because no single fabrication technique currently combines control over structural arrangement, material composition, and biofunctionalization, while maintaining reasonable cost and yield. Promising strategies are currently being investigated to allow for the fabrication of optimal polymer nanofiber tissue engineering scaffolds with the goal of treating damaged and degenerated tissues in a clinical setting.

Osteogenic differentiation of marrow stromal cells on random and aligned electrospun poly(L-lactide) nanofibers

The fibrillar structure and sub-micron diameter of electrospun nanofibers can be used to reproduce the morphology and structure of the natural extracellular matrix (ECM). The objective of this work was to investigate the effect of fiber alignment on osteogenic differentiation of bone marrow stromal (BMS) cells. Random and aligned poly(L-lactide) (PLLA) nanofibers were produced by collecting the spun fibers on a stationary plate and a rotating wheel, respectively, as the ground electrode. Morphology and alignment of the BMS cells seeded on the fibers were characterized by SEM. The effect of fiber orientation on osteogenic differentiation of BMS cells was determined by measuring alkaline phosphatase (ALPase) activity, calcium content, and mRNA expression levels of osteogenic markers. There was a strong correlation between the fiber and cell distributions for the random (p=0.16) and aligned (p=0.81) fibers. Percent deviation from ideal randomness (PDIR) values indicated that cells seeded on the random fibers (PDIR=6.5%) were likely to be distributed randomly in all directions while cells seeded on the aligned fibers (PDIR=86%) were highly likely to be aligned with the direction of fibers. BMS cell seeded on random and aligned fibers had similar cell count and ALPase activity with incubation time, but the calcium content on aligned fibers was significantly higher after 21 days compared to that of random fibers (p=0.003). Osteopontin (OP) and osteocalcin (OC) expression levels of BMS cells on fibers increased with incubation time. However, there was no difference between the expression levels of OP and OC on aligned vs. random fibers. The results indicate that BMS cells aligned in the direction of PLLA fibers to form long cell extensions, and fiber orientation affected the extent of mineralization, but it had no effect on cell proliferation or mRNA expression of osteogenic markers.

Treatment of ocular surface injuries by limbal and mesenchymal stem cells growing on nanofiber scaffolds

Stem cell (SC) therapy represents a promising approach to treat a wide variety of injuries, inherited diseases, or acquired SC deficiencies. One of the major problems associated with SC therapy remains the absence of a suitable matrix for SC growth and transfer. We describe here the growth and metabolic characteristics of mouse limbal stem cells (LSCs) and mesenchymal stem cells (MSCs) growing on 3D nanofiber scaffolds fabricated from polyamide 6/12 (PA6/12). The nanofibers were prepared by the original needleless electrospun Nanospider technology, which enables to create nanofibers of defined diameter, porosity, and a basis weight. Copolymer PA6/12 was selected on the basis of the stability of its nanofibers in aqueous solutions, its biocompatibility, and its superior properties as a matrix for the growth of LSCs, MSCs, and corneal epithelial and endothelial cell lines. The morphology, growth properties, and viability of cells grown on PA6/12 nanofibers were comparable with those grown on plastic. LSCs labeled with the fluorescent dye PKH26 and grown on PA6/12 nanofibers were transferred onto the damaged ocular surface, where their seeding and survival were monitored. Cotransfer of LSCs with MSCs, which have immunosuppressive properties, significantly inhibited local inflammatory reactions and supported the healing process. The results thus show that nanofibers prepared from copolymer PA6/12 represent a convenient scaffold for growth of LSCs and MSCs and transfer to treat SC deficiencies and various ocular surface injuries.

The influence hydroxyapatite nanoparticle shape and size on the properties of biphasic calcium phosphate scaffolds coated with hydroxyapatite-PCL composites

We developed a composite biphasic calcium phosphate (BCP) scaffold by coating a nanocomposite layer, consisting of hydroxyapatite (HA) nanoparticles and polycaprolactone (PCL), over the surface of BCP. The effects of HA particle size and shape in the coating layer on the mechanical and biological properties of the BCP scaffold were examined. Micro-computerized tomography studies showed that the prepared scaffolds were highly porous (approximately 91%) with large pore size (400-700 microm) and an interconnected porous network of approximately 100%. The HA nanoparticle (needle shape)-composite coated scaffolds displayed the highest compressive strength (2.1 +/- 0.17 MPa), compared to pure HA/beta-TCP (0.1 +/- 0.05 MPa) and to the micron HA - composite coated scaffolds (0.29 +/- 0.07 MPa). These needle shaped scaffolds also showed enhanced elasticity and similar stress-strain profile to natural bone. Needle shaped coated HA/PCL particles induced the differentiation of primary human bone derived cells, with significant upregulation of osteogenic gene expression (Runx2, collagen type I, osteocalcin and bone sialoprotein) and alkaline phosphatase activity compared to other groups. These properties are essential for enhancing bone ingrowth in load-bearing applications. The developed composite scaffolds possessed superior physical, mechanical, elastic and biological properties rendering them potentially useful for bone tissue regeneration.

Incorporating protein gradient into electrospun nanofibers as scaffolds for tissue engineering

We report a simple but straightforward approach to produce nanofiber scaffolds with incorporated protein gradient for cell culture studies. Standard electrospinning technique was used to fabricate a high-porosity random fiber matrix. Protein molecules were then deposited in the fiber matrix by a controlled filling method, allowing the generation of a concentration gradient on the sample. When cultured with NIH 3T3 cells, it was found that the cell population on the fiber matrix depends strongly on the protein concentration. The cell morphology observation also showed the effect of the hybrid system containing both a fibrillar network and surface-coated protein gradient, revealing a different behavior of cell spreading in comparison with the experimental data of cell culture without fibers or without protein gradient.

Composite fibrous membranes of PLGA and chitosan prepared by coelectrospinning and coaxial electrospinning

Membranes made of hybrid poly(lactide-co-glycolide)/chitosan fibers (H-PLGA/chitosan) and core/shell structured PLGA/chitosan fibers (C-PLGA/chitosan) were produced by coelectrospinning and coaxial electrospinning, respectively. The morphology, mechanical properties, water uptakes of the electrospun fibrous membranes were characterized, and the cytocompatibility of human embryo skin fibroblasts (hESFs) was investigated in comparison with each other as well as with the electrospun PLGA and chitosan membranes. Results of transmission electron microscope and X-ray photoelectron spectroscopy confirmed the core/shell structure of the C-PLGA/chitosan fiber. Because of the introduction of chitosan, both H-PLGA/chitosan and C-PLGA/chitosan membranes showed significantly higher water uptakes than that of PLGA but there was no significant difference between those of C-PLGA/chitosan and chitosan membranes. In dry state, the C-PLGA/chitosan membranes exhibited extremely higher Young's moduli (178.7 +/- 50.4 MPa) and strength (2.73 +/- 0.30 MPa) than those of H-PLGA/chitosan membranes (40.48 +/- 4.07, 1.44 +/- 0.12 MPa), respectively, but the values in wet state went down sharply because of the large amount (about 91%) of chitosan as the shell. Both H-PLGA/chitosan and C-PLGA/chitosan membranes showed better cytocompatibility than the PLGA membrane in adhesion, viability assays as well as morphology observation. The obtained composite H- or C-PLGA/chitosan membranes would be potentially applied in wound dressings or skin tissue engineering.

Nanofibrous composites for tissue engineering applications

Development of artificial matrices for tissue engineering is a crucial area of research in the field of regenerative medicine. Successful tissue scaffolds, in analogy with the natural mammalian extracellular matrix (ECM), are multi-component, fibrous, and on the nanoscale. In addition, to this key morphology, artificial scaffolds must have mechanical, chemical, surface, and electrical properties that match the ECM or basement membrane of the specific tissue desired. In particular, these material properties may vary significantly for the four primary tissues in the body: nerve, muscle, epithelial, and connective. In order to address this complex array of attributes with a polymeric material, a nanocomposite approach, employing a blend of materials, addition of a particle to enhance particular properties, or a surface treatment, is likely to be required. In this review, we examine nanocomposite approaches to address these diverse needs as a function of tissue type. The review is intended as a bridge between material scientists and biomedical researchers to give basic background information on tissue biology to the former, and on material processing approaches to the latter, in a general manner, and specifically review fibrous nanocomposite materials that have previously been used for cell studies, either in vivo or in vitro.

Fabricating a pearl/PLGA composite scaffold by the low-temperature deposition manufacturing technique for bone tissue engineering

Here we developed a composite scaffold of pearl/poly(lactic-co-glycolic acid) (pearl/PLGA) utilizing the low-temperature deposition manufacturing (LDM). LDM makes it possible to fabricate scaffolds with designed microstructure and macrostructure, while keeping the bioactivity of biomaterials by working at a low temperature. Process optimization was carried out to fabricate a mixture of pearl powder, PLGA and 1,4-dioxane with the designed hierarchical structures, and freeze-dried at a temperature of -40 degrees C. Scaffolds with square and designated bone shape were fabricated by following the 3D model. Marrow stem cells (MSCs) were seeded on the pearl/PLGA scaffold and then cultured in a rotating cell culture system. The adhesion, proliferation and differentiation of MSCs into osteoblasts were determined using scanning electronic microscopy, WST-1 assay, alkaline phosphatase activity assay, immunofluorescence staining and real-time reverse transcription polymerase chain reaction. The results showed that the composite scaffold had high porosity (81.98 +/- 3.75%), proper pore size (micropores: <10 microm; macropore: 495 +/- 54 microm) and mechanical property (compressive strength: 0.81 +/- 0.04 MPa; elastic modulus: 23.14 +/- 0.75 MPa). The pearl/PLGA scaffolds exhibited better biocompatibility and osteoconductivity compared with the tricalcium phosphate/PLGA scaffold. All these results indicate that the pearl/PLGA scaffolds fulfill the basic requirements of bone tissue engineering scaffold.

Direct differentiation of human embryonic stem cells into selective neurons on nanoscale ridge/groove pattern arrays

Human embryonic stem cells (hESCs) are pluripotent cells that have the potential to be used for tissue engineering and regenerative medicine. Repairing nerve injury by differentiating hESCs into a neuronal lineage is one important application of hESCs. Biochemical and biological agents are widely used to induce hESC differentiation. However, it would be better if we could induce differentiation of hESCs without such agents because these factors are expensive and it is difficult to control the optimal concentrations for efficient differentiation with reduced side effects. Moreover, the mechanism of differentiation induced by these factors is still not fully understood. In this study, we present evidence that nanoscale ridge/groove pattern arrays alone can effectively and rapidly induce the differentiation of hESCs into a neuronal lineage without the use any differentiation-inducing agents. Using UV-assisted capillary force lithography, we constructed nanoscale ridge/groove pattern arrays with a dimension and alignment that were finely controlled over a large area. Human embryonic stem cells seeded onto the 350-nm ridge/groove pattern arrays differentiated into neuronal lineage after five days, in the absence differentiation-inducing agents. This nanoscale technique could be used for a new neuronal differentiation protocol of hESCs and may also be useful for nanostructured scaffolding for nerve injury repair.

A programmed release multi-drug implant fabricated by three-dimensional printing technology for bone tuberculosis therapy

In the world, bone tuberculosis is still very difficult to treat and presents a challenge to clinicians. In this study, we utilized 3D printing technology to fabricate a programmed release multi-drug implant for bone tuberculosis therapy. The construction of the drug implant was a multi-layered concentric cylinder divided into four layers from the center to the periphery. Isoniazid and rifampicin were distributed individually into the different layers in a specific sequence of isoniazid-rifampicin-isoniazid-rifampicin. The drug release assays in vitro and in vivo showed that isoniazid and rifampicin were released orderly from the outside to the center to form the multi-drug therapeutic alliance, and the peak concentrations of drugs were detected in sequence at 8 to 12 day intervals. In addition, no negative effect on the proliferation of rabbit bone marrow mesenchymal stem cells was detected during the cytocompatibility assay. Due to its ideal pharmacologic action and cytocompatibility, the programmed release multi-drug implant with a complex construction fabricated by 3D printing technology could be of interest in prevention and treatment of bone tuberculosis.

Surface-functionalized electrospun nanofibers for tissue engineering and drug delivery

Electrospun nanofibers with a high surface area to volume ratio have received much attention because of their potential applications for biomedical devices, tissue engineering scaffolds, and drug delivery carriers. In order to develop electrospun nanofibers as useful nanobiomaterials, surfaces of electrospun nanofibers have been chemically functionalized for achieving sustained delivery through physical adsorption of diverse bioactive molecules. Surface modification of nanofibers includes plasma treatment, wet chemical method, surface graft polymerization, and co-electrospinning of surface active agents and polymers. A variety of bioactive molecules including anti-cancer drugs, enzymes, cytokines, and polysaccharides were entrapped within the interior or physically immobilized on the surface for controlled drug delivery. Surfaces of electrospun nanofibers were also chemically modified with immobilizing cell specific bioactive ligands to enhance cell adhesion, proliferation, and differentiation by mimicking morphology and biological functions of extracellular matrix. This review summarizes surface modification strategies of electrospun polymeric nanofibers for controlled drug delivery and tissue engineering.

Hepatic tissue engineering using scaffolds: state of the art

Severe hepatic failure accounts for many deaths and raises medical costs each year worldwide. Currently, liver transplantation is the most common therapeutic option for patients with end-stage chronic liver disease. Due to decrease in the number of organ donors, many in need of transplantation continue to remain on the waiting list. Hepatic Tissue Engineering is a step toward alleviating the need for organ donors. Regenerative medicine and tissue engineering require two complementary key ingredients as follows: 1) biologically compatible scaffolds that can be readily adopted by the body system without harm, and 2) suitable cells including various stem cells or primary cells that effectively replace the damaged tissues without adverse consequences. Yet many challenges must be overcome such as scaffold choice, cell source and immunological barriers. Today, hepatogenic differentiation of stem cells has created trust and promise for use of these cells in hepatic tissue engineering and liver replacement. However, using suitable scaffolds is an important key to achieving the necessary functions required for hepatic replacement. In recent years, different scaffolds have been used for liver tissue engineering. In this review, we have presented different concepts in using cell /scaffold constructs to guide hepatic tissue engineering.

A 3D hybrid model for tissue growth: the interplay between cell population and mass transport dynamics

To provide theoretical guidance for the design and in vitro cultivation of bioartificial tissues, we have developed a multiscale computational model that can describe the complex interplay between cell population and mass transport dynamics that governs the growth of tissues in three-dimensional scaffolds. The model has three components: a transient partial differential equation for the simultaneous diffusion and consumption of a limiting nutrient; a cellular automaton describing cell migration, proliferation, and collision; and equations that quantify how the varying nutrient concentration modulates cell division and migration. The hybrid discrete-continuous model was parallelized and solved on a distributed-memory multicomputer to study how transport limitations affect tissue regeneration rates under conditions encountered in typical bioreactors. Simulation results show that the severity of transport limitations can be estimated by the magnitude of two dimensionless groups: the Thiele modulus and the Biot number. Key parameters including the initial seeding mode, cell migration speed, and the hydrodynamic conditions in the bioreactor are shown to affect not only the overall rate, but also the pattern of tissue growth. This study lays the groundwork for more comprehensive models that can handle mixed cell cultures, multiple nutrients and growth factors, and other cellular processes, such as cell death.

Periodontal ligament cellular structures engineered with electrospun poly(DL-lactide-co-glycolide) nanofibrous membrane scaffolds

Periodontal tissue engineering is expected to overcome the limitations associated with the existing regenerative techniques for the treatment of periodontal defects involving alveolar bone, cementum, and periodontal ligament. Cell-based tissue engineering approaches involve the utilization of in vitro expanded cells with regenerative capacity and their delivery to the appropriate sites via biomaterial scaffolds. The aim of this study was to establish living periodontal ligament cell-containing structures on electrospun poly(DL-lactic-co-glycolic acid) (PLGA) nanofiber membrane scaffolds, assess their viability and characteristics, and engineer multilayered structures amenable to easy handling. Human periodontal ligament (hPDL) cells were expanded in explant culture and then characterized morphologically and immunohistochemically. PLGA nanofiber membranes were prepared by the electrospinning process; mechanical tensile properties were determined, surface topography, nanofiber size, and porosity status were investigated with SEM. Cells were seeded on the membranes at approximately 50,000 cell/cm(2) and cultured for 21 days either in expansion or in osteogenic induction medium. Cell adhesion and viability were demonstrated using SEM and MTT, respectively, and osteogenic differentiation was determined with IHC and immunohistomorphometric evaluation of osteopontin, osteocalcin, and bone sialoprotein marker expression. At days 3, 6, 9, and 12 additional cell/membrane layers were deposited on the existing ones and multilayered hybrid structures were established. Results indicate the feasibility of periodontal ligament cell-containing tissue-like structures engineering with PDL cells and electrospun nanofiber PLGA scaffolds supporting cell adhesion, viability and osteogenic differentiation properties of cells in hybrid structures amenable to macroscopic handling.

Effect of direct RGD incorporation in PLLA nanofibers on growth and osteogenic differentiation of human mesenchymal stem cells

The aim of this study was to functionalize synthetic poly-(L-lactic) (PLLA) nanofibers by direct incorporation of cRGD, in order to promote adhesion, growth and osteogenic differentiation of human mesenchymal stem cells (hMSC) in vitro. The cRGD was incorporated into PLLA nanofibers either by emulsion [PLLA-cRGD (d)] or suspension [PLLA-cRGD (s)]. Matrices were seeded with hMSC and cultivated over a period of 28 days under growth conditions and analyzed during the course. Although the mode of incorporation resulted in different distributions of the RGD peptide, it had no impact on the fiber characteristics when compared to corresponding unblended PLLA control fibers. However, hMSC showed better adherence on PLLA-cRGD (d). Nevertheless, this advantage was not reflected during the course of cultivation. Furthermore, the PLLA-cRGD (s) fibers mediated the osteogenic potential of collagen (determined as the expression and deposition of collagen and osteocalcin) to some extent. Further studies are needed in order to optimize the RGD distribution and concentration.

Problem of hydroxyapatite dispersion in polymer matrices: a review

This review summarizes recent work on manufacturing biocomposites suitable for bone tissue engineering. There is a great need to engineer multi-phase (i.e. composite) materials that combine the advantages exhibited by each component of the material, with a structure and composition similar to that of natural bone. The discussion concentrates on the preparation of nanocomposites containing hydroxyapatite particles (one of the most widely used bioceramics materials) with polymer matrices. Special attention is paid to the preparation of nanocomposites with individual (non-aggregated) nanoparticles because this is a key problem in nanotechnology industrialization. Controlling the mixing between so two dissimilar phases is a critical challenge in the design of these inorganic-organic systems. Several approaches that may be applied to overcome this problem will be described in this review.

A Novel Strategy Incorporated the Power of Mesenchymal Stem Cells to Allografts for Segmental Bone Tissue Engineering

Mesenchymal stem cells (MSCs) hold great promise for bone regeneration. However, the power of mesenchymal stem cells has not been applied to structural bone allografts in clinical practice. This study designed a new strategy to enhance the efficiency of allografts for segmental bone regeneration. Isolated MSCs were cultured to form a cell sheet. The MSC sheet was then wrapped onto structural allografts. The assembled structures were cultured in vitro to evaluate the differentiation potential of MSC sheet. The assembled structures were implanted subcutaneously into nude mice as well as into the segmental radius defect of rabbits to investigate the efficiency of MSC sheets to repopulate allografts for bone repair. MSC sheets, upon assembling on bone grafts, showed similar differentiation properties to the in situ periosteum in vitro. After implantation the MSC sheets accelerated the repopulation of bone grafts in nude mice. Moreover, MSC sheets induced thicker cortical bone formation and more efficient graft-to-bone end fusion at the segmental bone defects in rabbits. This study thus presented a novel, more efficient, and practical strategy for large weight-bearing bone reconstruction by using MSC sheets to deliver large number of MSCs to repopulate the bone allografts.

Influence of nanofibers on the growth and osteogenic differentiation of stem cells: a comparison of biological collagen nanofibers and synthetic PLLA fibers

The aim of this study was to compare biological collagen I (ColI) and synthetic poly-(L: -lactide) (PLLA) nanofibers concerning their stability and ability to promote growth and osteogenic differentiation of human mesenchymal stem cells in vitro. Matrices were seeded with human stem cells and cultivated over a period of 28 days under growth and osteoinductive conditions and analyzed during the course. During this time the PLLA nanofibers remained stable while the presence of cells resulted in an attenuation of the ColI nanofiber mesh. Although there was a tendency for better growth and osteoprotegerin production of stem cells when cultured on collagen nanofibers, there was no significant difference compared to PLLA nanofibers or controls. The gene expression of alkaline phosphate, osteocalcin and collagen I diminished in the initial phase of cultivation independent of the polymer used. In the case of PLLA fibers, this gene expression normalized during the course of cultivation, whereas the presence of collagen nanofibers resulted in an increased gene expression of osteocalcin and collagen during the course of the experiment. Taken together the PLLA fibers were easier to produce, more stable and did not compromise growth and differentiation of stem cells over the course of experiment. On the other hand, collagen nanofibers supported the differentiation process to some extent. Nevertheless, the need for fixation as well as the missing stability during cell culture requires further work.

Improvement of differentiation and mineralization of pre-osteoblasts on composite nanofibers of poly(lactic acid) and nanosized bovine bone powder

The effect of NBM incorporation in PLA nanofibers on their mechanical properties and the differentiation and mineralization of osteoblasts was studied. At 20% NBM, the Young's modulus of the nanofibers was 37.78 +/- 4.23, significantly larger than that of pure PLA nanofibers. MC3T3-E1 pre-osteoblasts attached to both types of nanofibers and developed full osteogenic phenotypes. A profound effect of NBM on the mineralization of MC3T3-E1 pre-osteoblasts was confirmed, suggesting that NBM/PLA composite nanofibers exhibit properties similar to those of the native collagen-rich mineralized bone matrix, and could therefore serve as a temporary substrate for facilitating the differentiation and mineralization of bone-forming cells.

Enhancement of nanofibrous scaffold of multiwalled carbon nanotubes/polyurethane composite to the fibroblasts growth and biosynthesis

In this work, the effect of nanofibrous structure and multiwalled carbon nanotubes (MWNTs) incorporation in the polyurethane (PU) on the fibroblasts growth behavior was studied. The nanofibrous scaffold of multiwalled carbon nanotubes and polyurethane composite (MWNT/PU) with an average fiber diameter of 300-500 nm was fabricated by electrospinning technique. The nanofibrous scaffold of PU, smooth film of PU, and MWNT/PU were also prepared as controls. Cell viability assay, laser confocal microscopy, and scanning electron microscopy were applied to evaluate cell adhesion, proliferation, and cytoskeletal development on the scaffolds, respectively. Cell-released protein was analyzed by Bradford protein assay, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), mass spectrometry, and transwell assay, respectively. Experimental results demonstrated that the scaffold with nanofibrous structure and MWNTs incorporation exhibited highest enhancement not only to the cell adhesion and proliferation but also to the cell migration and aggregation. Besides, cells cultured on the nanofibrous scaffold of MWNT/PU released the largest amount of proteins including collagen in comparison with those on the other substrates. Hence, the nanofibrous architecture and MWNTs incorporation provided favorite interactions to the cells, which implied the application potentials of the nanofibrous composite for tissue repair and regeneration.

Biochemical and molecular characterization of hepatocyte-like cells derived from human bone marrow mesenchymal stem cells on a novel three-dimensional biocompatible nanofibrous scaffold

BACKGROUND

There is significant interest in using nanofibers in tissue engineering from stem cells. The transdifferentiation of mesenchymal stem cells into the hepatic lineage in a nanofibrous structure has not been reported. In this study, a three dimensional nanofibrous scaffold is introduced for differentiation of human bone marrow derived mesenchymal stem cells (hBMSCs) into hepatocytes.

METHODS

A scaffold composed of Poly (epsilon-caprolactone), collagen and polyethersulfone was fabricated by the electrospinning technique. After characterization of isolated hBMSCs, the performance of the cells on the scaffold was evaluated by Scanning Electron Microscopy (SEM) and MTT assay. Cytological, molecular and biochemical markers were measured to confirm differentiation potential of hBMSCs into hepatocytes.

RESULTS

The isolated cells possessed the basic properties of mesenchymal stem cells (MSCs). Based on scanning electron microscope (SEM) analysis and MTT assay, it was shown that the cells adhere, penetrate and proliferate on the nanofibers. Cultured cells on the nanofibers differentiated into hepatocyte-like cells and expressed hepatocyte specific markers such as albumin, alpha-fetoprotein, cytokeratin-18, cytokeratin-19 and cytochrome P450 3A4 at mRNA levels. Appearance of a considerable number of albumin-positive cells cultivated on the scaffold (47 +/- 4%) as compared to the two-dimensional culture system (28 +/- 6%) indicates the supporting role of the scaffold. The efficiency of the cells to produce albumin, urea, transferrin, serum glutamic pyruvic transaminase and serum oxaloacetate aminotransferase in hepatocytes on the scaffold further attest to the functionality of the cells.

CONCLUSION

The data presented in this study show that the engineered nanofibrous scaffold is a conductive matrix which supports and enhances MSC development into functional hepatocyte-like cells.

Nanofiber applications for burn care

Nanotechnology is a growing field of manufactured materials with sizes less than 1 mum, and it is particularly useful in the field of medicine because these applications replicate components of a cell's in vivo environment. Nanofibers, which mimic collagen fibrils in the extracellular matrix (ECM), can be created from a host of natural and synthetic compounds and have multiple properties that may be beneficial to burn wound care. These properties include a large surface-area-to-volume ratio, high porosity, improved cell adherence, proliferation and migration, and controlled in vivo degradation rates. The large surface area of nanofiber mats allows for increased interaction with compounds and provides a mechanism for sustained release of antibiotics, analgesics, or growth factors into burn wounds; high porosity allows diffusion of nutrients and waste. Improved cell function on these scaffolds will promote healing. Controlled degradation rates of these scaffolds will promote scaffold absorption after its function is no longer required. The objective of this article is to review the current literature describing nanofibers and their potential application to burn care.

Coating electrospun poly(epsilon-caprolactone) fibers with gelatin and calcium phosphate and their use as biomimetic scaffolds for bone tissue engineering

Electrospinning was employed to fabricate fibrous scaffolds of poly(epsilon-caprolactone) in the form of nonwoven mats. The surfaces of the fibers were then coated with gelatin through layer-by-layer self-assembly, followed by functionalization with a uniform coating of bonelike calcium phosphate by mineralization in the 10 times concentrated simulated body fluid for 2 h. Transmission electron microscopy, water contact angle, and scanning electron microscopy measurements confirmed the presence of gelatin and calcium phosphate coating layers, and X-ray diffraction results suggested that the deposited mineral phase was a mixture of dicalcium phosphate dehydrate (a precursor to apatite) and apatite. It was also demonstrated that the incorporation of gelatin promoted nucleation and growth of calcium phosphate. The porous scaffolds could mimic the structure, composition, and biological function of bone extracellular matrix. It was found that the preosteoblastic MC3T3-E1 cells attached, spread, and proliferated well with a flat morphology on the mineralized scaffolds. The proliferation rate of the cells on the mineralized scaffolds was significantly higher (by 1.9-fold) than that on the pristine fibrous scaffolds after culture for 7 days. These results indicated that the hybrid system containing poly(epsilon-caprolactone), gelatin, and calcium phosphate could serve as a new class of biomimetic scaffolds for bone tissue engineering.

A method to quantitatively measure the elastic modulus of materials in nanometer scale using atomic force microscopy

A method is proposed for quantitatively measuring the elastic modulus of materials using atomic force microscopy (AFM) nanoindentation. In this method, the cantilever deformation and the tip-sample interaction during the early loading portion are treated as two springs in series, and based on Sneddon's elastic contact solution, a new cantilever-tip property α is proposed which, together with the cantilever sensitivity A, can be measured from AFM tests on two reference materials with known elastic moduli. The measured α and A values specific to the tip and machine used can then be employed to accurately measure the elastic modulus of a third sample, assuming that the tip does not get significantly plastically deformed during the calibration procedure. AFM nanoindentation tests were performed on polypropylene (PP), fused quartz and acrylic samples to verify the validity of the proposed method. The cantilever-tip property and the cantilever sensitivity measured on PP and fused quartz were 0.514 GPa and 51.99 nm nA(-1), respectively. Using these measured quantities, the elastic modulus of acrylic was measured to be 3.24 GPa, which agrees well with the value measured using conventional depth-sensing indentation in a commercial nanoindenter.

Putting Electrospun Nanofibers to Work for Biomedical Research

Electrospinning has been exploited for almost one century to process polymers and related materials into nanofibers with controllable compositions, diameters, porosities, and porous structures for a variety of applications. Owing to its high porosity and large surface area, a non-woven mat of electrospun nanofibers can serve as an ideal scaffold to mimic the extracellular matrix for cell attachment and nutrient transportation. The nanofiber itself can also be functionalized through encapsulation or attachment of bioactive species such as extracellular matrix proteins, enzymes, and growth factors. In addition, the nanofibers can be further assembled into a variety of arrays or architectures by manipulating their alignment, stacking, or folding. All these attributes make electrospinning a powerful tool for generating nanostructured materials for a range of biomedical applications that include controlled release, drug delivery, and tissue engineering.

Nanoparticle technology in bone tissue engineering

Nanotechnology has been increasingly utilized to enhance bone tissue engineering strategies. In particular, nanotechnology has been employed to overcome some of the current limitations associated with bone regeneration methods including insufficient mechanical strength of scaffold materials, ineffective cell growth and osteogenic differentiation at the defect site, as well as unstable and insufficient production of growth factors to stimulate bone cell growth. Among the tremendous technologies of nanoparticles in biological systems, we focus here on the three major nanoparticle research areas that have been developed to overcome these limitations and disadvantages: (a) the generation of nanoparticle-composite scaffolds to provide increased mechanical strength for bone graft, (b) the fabrication of nanofibrous scaffolds to support cell growth and differentiation through morphologically-favored architectures, and (c) the development of novel delivery and targeting systems of genetic material, especially those encoding osteogenic growth factors. These nanoparticle-based bone tissue engineering technologies possess a great potential to ensure the efficacy of clinical bone regeneration.

Advancing tissue engineering by using electrospun nanofibers

Electrospinning is a versatile technique that enables the development of nanofiber-based scaffolds, from a variety of polymers that may have drug-release properties. Using nanofibers, it is now possible to produce biomimetic scaffolds that can mimic the extracellular matrix for tissue engineering. Interestingly, nanofibers can guide cell growth along their direction. Combining factors like fiber diameter, alignment and chemicals offers new ways to control tissue engineering. In vivo evaluation of nanomats included their degradation, tissue reactions and engineering of specific tissues. New advances made in electrospinning, especially in drug delivery, support the massive potential of these nanobiomaterials. Nevertheless, there is already at least one product based on electrospun nanofibers with drug-release properties in a Phase III clinical trial, for wound dressing. Hopefully, clinical applications in tissue engineering will follow to enhance the success of regenerative therapies.

Electrospun fibrous mats with high porosity as potential scaffolds for skin tissue engineering

Diffusional limitations of mass transport have adverse effects on engineering tissues that normally have high vascularity and cellularity. The current electrospinning method is not always successful to create micropores to encourage cell infiltration within the scaffold, especially when relatively large-sized pores are required. In this study, a slow rotating frame cylinder was developed as the collector to extend the pore size and increase the porosity of electrospun fibrous scaffolds. Fibrous mats with porosity as high as 92.4% and average pore size of 132.7 microm were obtained. Human dermal fibroblasts (HDFs) were seeded onto these mats, which were fixed on a cell-culture ring to prevent the shrinkage and contraction during the incubation. The viability test indicated that significantly more HDFs were generated on highly porous fibrous mats. Toluidine blue staining showed that the highly porous scaffold provided mechanical support for cells to maintain uniform distribution. The cross-section observations indicated that cells migrated and infiltrated more than 100 microm inside highly porous fibrous mats after 5 d incubation. The immunohistochemistry analysis demonstrated that cells began secreting collagen, which is the main constituent of extracellular matrix. It is supposed that highly porous electrospun fibrous scaffolds could be constructed by this elaboration and may be used for skin tissue engineering.

Non-invasive characterization of structure and morphology of silk fibroin biomaterials using non-linear microscopy

Designing biomaterial scaffolds remains a major challenge in tissue engineering. Key to this challenge is improved understanding of the relationships between the scaffold properties and its degradation kinetics, as well as the cell interactions and the promotion of new matrix deposition. Here we present the use of non-linear spectroscopic imaging as a non-invasive method to characterize not only morphological, but also structural aspects of silkworm silk fibroin-based biomaterials, relying entirely on endogenous optical contrast. We demonstrate that two photon excited fluorescence and second harmonic generation are sensitive to the hydration, overall beta sheet content and molecular orientation of the sample. Thus, the functional content and high resolution afforded by these non-invasive approaches offer promise for identifying important connections between biomaterial design and functional engineered tissue development. The strategies described also have broader implications for understanding and tracking the remodeling of degradable biomaterials under dynamic conditions both in vitro and in vivo.

Mechanical and biological properties of hydroxyapatite/tricalcium phosphate scaffolds coated with poly(lactic-co-glycolic acid)

Regeneration of bone, cartilage and osteochondral tissues by tissue engineering has attracted intense attention due to its potential advantages over the traditional replacement of tissues with synthetic implants. Nevertheless, there is still a dearth of ideal or suitable scaffolds based on porous biomaterials, and the present study was undertaken to develop and evaluate a useful porous composite scaffold system. Here, hydroxyapatite (HA)/tricalcium phosphate (TCP) scaffolds (average pore size: 500 microm; porosity: 87%) were prepared by a polyurethane foam replica method, followed by modification with infiltration and coating of poly(lactic-co-glycolic acid) (PLGA). The thermal shock resistance of the composite scaffolds was evaluated by measuring the compressive strength before and after quenching or freezing treatment. The porous structure (in terms of pore size, porosity and pore interconnectivity) of the composite scaffolds was examined. The penetration of the bone marrow stromal stem cells into the scaffolds and the attachment of the cells onto the scaffolds were also investigated. It was shown that the PLGA incorporation in the HA/TCP scaffolds significantly increased the compressive strength up to 660 kPa and the residual compressive strength after the freezing treatment decreased to 160 kPa, which was, however, sufficient for the scaffolds to withstand subsequent cell culture procedures and a freeze-drying process. On the other hand, the PLGA coating on the strut surfaces of the scaffolds was rather thin (<5 microm) and apparently porous, maintaining the high open porosity of the HA/TCP scaffolds, resulting in desirable migration and attachment of the bone marrow stromal stem cells, although a thicker PLGA coating would have imparted a higher compressive strength of the PLGA-coated porous HA/TCP composite scaffolds.

Electrospun nanostructured scaffolds for tissue engineering applications

Despite being known for decades (since 1934), electrospinning has emerged recently as a very widespread technology to produce synthetic nanofibrous structures. These structures have morphologies and fiber diameters in a range comparable with those found in the extracellular matrix of human tissues. Therefore, nanofibrous scaffolds are intended to provide improved environments for cell attachment, migration, proliferation and differentiation when compared with traditional scaffolds. In addition, the process versatility and the highly specific surface area of nanofiber meshes may facilitate their use as local drug-release systems. Common electrospun nanofiber meshes are characterized by a random orientation. However, in some special cases, aligned distributions of the fibers can be obtained, with an interconnected microporous structure. The characteristic pore sizes and the inherent planar structure of the meshes can be detrimental for the desired cell infiltration into the inner regions, and eventually compromise tissue regeneration. Several strategies can be followed to overcome these limitations, and are discussed in detail here.