Antibiotic-loaded biomaterials and the risks for the spread of antibiotic resistance following their prophylactic and therapeutic clinical use

Polymeric prodrugs of ampicillin as antibacterial coatings

A novel ampicillin prodrug containing two carboxylic acid functionalities was synthesized by reacting ampicillin with acyl chloride in the presence of base. This prodrug was subsequently converted into a poly(anhydride-amide) via solution polymerization. The polymer, which chemically incorporates the ampicillin prodrug into the polymeric backbone, was developed as a film to prevent infections associated with medical devices by controlled, localized release of antimicrobials. The robust polymer coatings exhibiting strong adhesion to stainless steel were produced under elevated temperature and reduced pressure. The in vitro hydrolytic degradation of the polymer into the ampicillin prodrug was measured and the antibacterial activity of polymer-derived coatings was examined using a Gram-positive bacterium, Staphylococcus aureus. Furthermore, the polymer cytotoxicity was screened using fibroblasts. The ampicillin prodrug demonstrated antibacterial activity and the polymer demonstrated no cytotoxic effects on fibroblasts. Based on these results, the biodegradation of the antimicrobial-based poly(anhydride-amide) into the prodrug displays substantial promise as an implant or implant coating to reduce device failure resulting from bacterial infections.

Evidence of MRSE on a gentamicin and vancomycin impregnated polymethyl-methacrylate (PMMA) bone cement spacer after two-stage exchange arthroplasty due to periprosthetic joint infection of the knee

BACKGROUND

Periprosthetic joint infections (PJI) are often treated by two stage exchange with the use of an antibiotic impregnated spacer. Most of the two-stage exchange algorithms recommend the implantation of an antibiotic-impregnated spacer during the first stage for a period of 2-24 weeks before reimplantation of the new prosthesis. For the spacer to have a therapeutic effect, the local antibiotic concentration must be greater than the minimal inhibition concentration (MIC) against the pathogens causing the PJI. It must remain so for the entire spacer period, otherwise recurrence of infection or resistances might occur. The question as to whether a sufficient concentration of antibiotics in vivo is reached for the entire spacer period has not been answered satisfactorily.

CASE PRESENTATION

We here present a case of a histologically confirmed chronic PJI 20 month after primary arthroplasty. The primary knee arthroplasty was performed due to osteoarthritis of the joint. Initial assessment did not detect a causative pathogen, and two stage exchange with a vancomycin-gentamycin impregnated spacer was performed. At the time of reimplantation, sonication of the explanted spacer revealed a multi-resistant strain of staphylococcus epidermidis on the device and in the joint. Adaption of the therapy and prolonged treatment successfully eradicated the infection.

CONCLUSION

According to the authors' knowledge, the case presented here confirms for the first time the surface contamination (proven through sonication) of a vancomycin-/gentamicin- impregnated Vancogenx®-spacer with a MRSE after ten weeks of implantation.This case study demonstrates the difficulties still associated with the diagnostics of PJI and the published different two stage treatment regimes with the use of antibiotic impregnated spacers.

Analysis of parameters influencing the release of antibiotics mixed with bone grafting material using a reliable mixing procedure

Local infections arising from fracture fixation, defect reconstruction or joint replacement can cause extreme pain and impaired healing, lead to revision operations, prolong hospital stay and increase costs. Treatment options including prophylaxis are afforded by the use of grafts and biomaterials loaded with antibiotics. These can produce local therapeutic concentrations with a reduced systemic concentration and reduced systemic side-effects. Patient-specific loading of osteogenic graft materials with antibiotic could be an important option for orthopaedic surgeons. A local therapeutic concentration must be available for the desired duration and cytotoxic effects must be kept within an acceptable range. The present study investigates a simple and reliable mixing procedure that could be used for the perioperative combination of antibiotic powders and solutions with bone grafting materials. The potential influence of concentration and sampling regime on the release kinetics of gentamicin, tobramycin and vancomycin was studied over a period of 56days and potency and cytotoxicity were evaluated. In all treatment groups, gentamicin and tobramycin were completely released within 3days whilst vancomycin was released over a period of 14days. The results clearly show that the main parameter influencing release is the molecular weight of the drug. Growth of Staphylococcus aureus was inhibited in all 3 treatment groups for at least 3days. Cell viability and alkaline phosphatase activity of primary osteoblast-like cells were not significantly affected by the antibiotic concentrations obtained from the elution experiments. Bone grafting is an established component of surgery for bone defect filling and for biological stimulation of healing. Patient-specific enhancement of such procedures by incorporation of antibiotics for infection prevention or by addition of cytokines for promotion of impaired healing or for treatment of critical size defects will be a relevant issue in the future.

The potential role of increasing the release of mouse β- defensin-14 in the treatment of osteomyelitis in mice: a primary study

Mammalian β-defensins are small cationic peptides that have been implicated in mediating innate immune defenses against microbial infection. Mouse β-defensin-14 (MBD-14), based on structural and functional similarities, appears to be an ortholog of human β-defensin-3 (HBD-3). Previous studies identified signaling pathway p38 mitogen-activated protein kinase (MAPK) that contributed to the expression of MBD-14 in mouse osteoblasts upon contacted with methicillin-resistance Staphylococcus aureus (MRSA) supernatant, which provided a theoretical basis as a promising therapeutic target in the treatment of intramedullary infection with MRSA in vivo. In this study, the medullary cavities of tibiae were contaminated with MRSA 10(3) colony forming units and different doses of p38 MAPK agonists anisomycin were followed as group III or IV in 30 mice. Fifteen animals that received phosphate- buffered saline served as group II and 15 mice were not contaminated with MRSA and received phosphate-buffered saline served as controls (group I). Follow-up was 7 days. In day 1, day 4 and day 7 postoperatively, infection was evaluated by blood routine, microbiological and histological analyses after sacrifice. All animals of group II developed microbiological and histological signs of infection. Histological signs of infection, white blood counts and cultures of group III and IV showed significantly reduced bacterial growth compared to cultures of group II. Simultaneously, different doses of anisomycin significantly induced the expression of osteoblast-associated genes, including alkaline phosphatase, osteocalcin and collagen type I. In addition, the expression of HBD-3 in human interfacial membranes around infected periprosthetic joint by staphylococcus contaminated was evaluated, and the expression pattern changed with significant induction of HBD-3 in infected periprosthetic joint compared with aseptic loosening under inflammatory conditions. Our primary study indicated that the potential antibacterial role of increased MBD-14 in the osteomyelitis mouse model.

Identification of antimicrobial peptides and immobilization strategy suitable for a covalent surface coating with biocompatible properties

Bacterial accumulation on solid material displays a major source of biomaterial associated infections, cross contamination, and spreading. To overcome these problems, different investigations on surface modifications for the containment of bacterial adhesion have been done. The aim of this research is the development of a rapid and efficient screening procedure to identify and investigate biologically active peptides in an immobilized state in order to produce an antimicrobial surface coating. We figured out that the antimicrobial mode of action is the most important parameter because only peptides with pronounced membrane disruption abilities displayed meaningful activity in an immobilized state. In addition, we highlighted the influence of the coupling reaction chemistry on the activity and amount of the immobilized peptide. Thereupon we developed an optimized antimicrobial surface coating with unrestricted antimicrobial properties by adjusting the immobilization strategy in combination with lowering the necessary peptide amount. Moreover we demonstrated that this antimicrobial surface coating displayed no cytotoxic activity against a eukaryotic cell line and thereby indicates a promising biocompatibility. Furthermore, different antimicrobial peptides obtained either by chemical peptide synthesis or by recombinant DNA technology were used in this study and their activities as well as their potential applications were discussed.

Antimicrobial functionalization of silicone surfaces with engineered short peptides having broad spectrum antimicrobial and salt-resistant properties

Catheter-associated urinary tract infections (CAUTIs) are often preceded by pathogen colonization on catheter surfaces and are a major health threat facing hospitals worldwide. Antimicrobial peptides (AMPs) are a class of new antibiotics that hold promise in curbing CAUTIs caused by antibiotic-resistant pathogens. This study aims to systematically evaluate the feasibility of immobilizing two newly engineered arginine/lysine/tryptophan-rich AMPs with broad antimicrobial spectra and salt-tolerant properties on silicone surfaces to address CAUTIs. The peptides were successfully immobilized on polydimethylsiloxane and urinary catheter surfaces via an allyl glycidyl ether (AGE) polymer brush interlayer, as confirmed by X-ray photoelectron spectroscopy and water contact angle analyses. The peptide-coated silicone surfaces exhibited excellent microbial killing activity towards bacteria and fungi in urine and in phosphate-buffered saline. Although both the soluble and immobilized peptides demonstrated membrane disruption capabilities, the latter showed a slower rate of kill, presumably due to reduced diffusivity and flexibility resulting from conjugation to the polymer brush. The synergistic effects of the AGE polymer brush and AMPs prevented biofilm formation by repelling cell adhesion. The peptide-coated surface showed no toxicity towards smooth muscle cells. The findings of this study clearly indicate the potential for the development of AMP-based coating platforms to prevent CAUTIs.

Design of imperfectly amphipathic α-helical antimicrobial peptides with enhanced cell selectivity

Antimicrobial peptides (AMPs), which are produced by multicellular organisms as a defense mechanism against competing pathogenic microbes, appear to be excellent candidates for the development of novel antimicrobial agents. Amphipathicity is traditionally believed to be crucial to the de novo design or systematic optimization of AMPs. In this study, we designed a series of short α-helical AMPs with imperfect amphipathicity to augment the arsenal of strategies and to gain further insights into their antimicrobial and hemolytic activity. These imperfectly amphipathic α-helical AMPs were designed by replacing the paired charged amino acid residues on the polar face of an amphipathic peptide with tryptophan residues on the basis of α-helical protein folding principles. PRW4, an imperfectly amphipathic α-helical AMP with hydrogen bonds formed by paired tryptophan residues, was observed to be more selective towards bacterial cells than toward human red blood cells. PRW4 was also effective against Gram-negative and Gram-positive bacteria, and fluorescence spectroscopy, flow cytometry, scanning electron microscopy and transmission electron microscopy indicated that PRW4 killed microbial cells by permeabilizing the cell membrane and damaging their membrane integrity. Therefore, disruptive amphipathicity has excellent potential for the rational design and optimization of AMPs with promising antimicrobial activities.

Synthesis, structures and properties of self-assembling quaternary ammonium dansyl fluorescent tags for porous and non-porous surfaces

Surface grafted silane, phosphate and benzophenone dansyl molecules.

Biological evaluation of alginate-based hydrogels, with antimicrobial features by Ce(III) incorporation, as vehicles for a bone substitute

A novel hydrogel, based on an alginate/hyaluronate mixture and Ce(III) ions, with effective bioactive and antimicrobial ability was developed to be used as vehicle of a synthetic bone substitute producing an injectable substitute (IBS). Firstly, three different IBSs were prepared using three developed alginate-based hydrogels, the hydrogel Alg composed by alginate, the hydrogel Alg/Ch composed by an alginate/chitosan mixture and the hydrogel Alg/HA composed by an alginate/hyaluronate mixture. MG63 cells viability on the IBSs was evaluated, being observed a significantly higher cell viability on the Alg/HA_IBS at all time points, which indicates a better cell adaptation to the material, increasing their predisposition to produce extracellular matrix and thus allowing a better bone regeneration. Moreover, SEM analysis showed evident filopodia and a spreader shape of MG63 cells when seeded on Alg/HA_IBS. This way, based upon the in vitro results, the hydrogel Alg/HA was chosen to the in vivo study by subcutaneous implantation in an animal model, promoting a slight irritating tissue response and visible tissue repairing. The next step was to grant antimicrobial properties to the hydrogel that showed the best biological behavior by incorporation of Ce(III) ions into the Alg/HA, producing the hydrogel Alg/HA2. The antimicrobial activity of these hyaluronate-based hydrogels was evaluated against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa and Candida albicans. Results showed that Ce(III) ions can significantly enhance the hydrogel antimicrobial ability without compromising the osteoconductivity improvement promoted by the vehicle association to the synthetic bone substitute.

Silver-containing mesoporous bioactive glass with improved antibacterial properties

The aim of the present work is the study of the bacteriostatic/bactericidal effect of a silver-containing mesoporous bioactive glass obtained by evaporation-induced self-assembly and successive thermal stabilization. Samples of the manufactured mesophase were characterized by means of transmission electron microscopy and N₂ adsorption/desorption at 77 K, revealing structural and textural properties similar to SBA-15 mesoporous silica. Glass samples used for bioactivity experiments were put in contact with a standardized, commercially available cell culture medium instead of lab-produced simulated body fluid, and were then characterized by means of X-ray diffraction, field emission scanning electron microscopy and Fourier transform infrared spectroscopy. All these analyses confirmed the development of a hydroxyl carbonate apatite layer on glass particles. Moreover, the investigated mesostructure showed a very good antibacterial effect against S. aureus strain, with a strong evidence of bactericidal activity already registered at 0.5 mg/mL of glass concentration. A hypothesis about the mechanism by which Ag affects the bacterial viability, based on the intermediate formation of crystalline AgCl, was also taken into account. With respect to what already reported in the literature, these findings claim a deeper insight into the possible use of silver-containing bioactive glasses as multifunctional ceramic coatings for orthopedic devices.

The use of antimicrobial-impregnated PMMA to manage periprosthetic infections: controversial issues and the latest developments

Despite improvements in intraoperative antimicrobial procedures, in surgical techniques and in implant design for joint replacement, periprosthetic infection after arthroplasty is still one of the most challenging problems encountered by orthopedic surgeons. Systemic antibiotics are not sufficiently effective to eradicate such deep infections because of the impaired blood circulation and low antibiotic concentration at the implantation site. As a local drug delivery system, antibiotic-impregnated PMMA (polymethylmethacrylate) bone cements have been widely used for prophylaxis or treatment of deep infections after total joint replacement. However, the effectiveness of antibiotic-loaded PMMA in preventing infections after arthroplasty is still controversial. Furthermore, the outcomes of established deep infections treated with this technique are not consistent. The local use of antibiotics has led to the emergence of antibiotic-resistant bacterial strains and has adverse effects on the function of osteogenic cells. Recently, many efforts have been made to identify new antibacterial agents that can be loaded into PMMA. These antimicrobial agents should exhibit good antibacterial activity against antibiotic-resistant strains and should simultaneously enhance osteointegration between the PMMA and the bone tissue. PMMA loaded with chitosan or chitosan derivatives has been demonstrated to induce improved osteogenic activity and to exhibit antibacterial activity in a preclinical study.

An overview of the methodological approach to the in vitro study of anti-infective biomaterials

Biomaterial-associated infections have an enormous impact in terms of morbidity of the patients and costs to national health systems. Perioperative antibiotics and aseptic procedures have not proved sufficient to eradicate the occurrence of this type of infections which often lead to devastating effects. Adjunctive strategies for preventing the establishment of infections are increasingly being centered on the development of new biomaterials with anti-infective properties. The creation of new anti-infective biomaterials can be obtained by alternative approaches oriented to achieve either bacteria-repellent surfaces or bioactive surfaces expressing self-sterilizing properties when not even able to treat pre-existing infections in the surrounding tissues. Here, we offer a short overview of the currently available in vitro methods that can be used to investigate and assess the performance of anti-infective biomaterials, with special emphasis on those whose mechanism of action is based on bacteria-repellent surfaces.

A review of the biomaterials technologies for infection-resistant surfaces

Anti-infective biomaterials need to be tailored according to the specific clinical application. All their properties have to be tuned to achieve the best anti-infective performance together with safe biocompatibility and appropriate tissue interactions. Innovative technologies are developing new biomaterials and surfaces endowed with anti-infective properties, relying either on antifouling, or bactericidal, or antibiofilm activities. This review aims at thoroughly surveying the numerous classes of antibacterial biomaterials and the underlying strategies behind them. Bacteria repelling and antiadhesive surfaces, materials with intrinsic antibacterial properties, antibacterial coatings, nanostructured materials, and molecules interfering with bacterial biofilm are considered. Among the new strategies, the use of phages or of antisense peptide nucleic acids are discussed, as well as the possibility to modulate the local immune response by active cytokines. Overall, there is a wealth of technical solutions to contrast the establishment of an implant infection. Many of them exhibit a great potential in preclinical models. The lack of well-structured prospective multicenter clinical trials hinders the achievement of conclusive data on the efficacy and comparative performance of anti-infective biomaterials.

A review of the clinical implications of anti-infective biomaterials and infection-resistant surfaces

Infection is currently regarded as the most severe and devastating complication associated to the use of biomaterials. The important social, clinical and economic impacts of implant-related infections are promoting the efforts to obviate these severe diseases. In this context, the development of anti-infective biomaterials and of infection-resistant surfaces is being regarded as the main strategy to prevent the establishment of implant colonisation and biofilm formation by bacteria. In this review, the attention is focused on the biomaterial-associated infections, from which the need for anti-infective biomaterials originates. Biomaterial-associated infections differ markedly for epidemiology, aetiology and severity, depending mainly on the anatomic site, on the time of biomaterial application, and on the depth of the tissues harbouring the prosthesis. Here, the diversity and complexity of the different scenarios where medical devices are currently utilised are explored, providing an overview of the emblematic applicative fields and of the requirements for anti-infective biomaterials.

PolyNaSS grafting on titanium surfaces enhances osteoblast differentiation and inhibits Staphylococcus aureus adhesion

Titanium surface modifications to simultaneously prevent bacterial adhesion but promote bone-cell functions could be highly beneficial for improving implant osseointegration. In the present in vitro study, the effect of sulfonate groups on titanium surfaces was investigated with respect to both S. aureus adhesion and osteoblast functions pertinent to new bone formation. Commercial pure titanium (cpTi) squares were oxydized (Tiox), grafted with poly(sodium styrene sulfonate) groups (Tigraft) by covalent bonding using radical polymerization, and were characterized by infrared spectroscopy (HATR-FTIR) and colorimetry. Bacterial adhesion study showed that Tigraft exhibited high inhibition of S. aureus adhesion S at levels >90 %, when compared to cpTi (P < 0.05). In contrast osteoblasts adhesion was similar on all three titanium surfaces. While the kinetics of cell proliferation were similar on the three titanium surfaces, Alkaline phosphatase-specific activity of osteoblasts cultured on Tigraft surfaces was twofold higher than that observed on either on Tiox or cpTi surfaces (P < 0.01). More importantly, the amount and the distribution of calcium-containing nodules was different. The total area covered by calcium-containing nodules was 2.2-fold higher on the Tigraft as compared to either Tiox or cpTi surfaces (P < 0.01). These results provide evidence that poly(sodium styrene sulfonate) groups grafting on cpTi simultaneously inhibits bacteria adhesion but promote osteoblast function pertinent to new bone formation. Such modified titanium surfaces offer a promising strategy for preventing biofilm-related infections and enhancing osteointegration of implants in orthopaedic and dental applications.

Surface-mediated release of a small-molecule modulator of bacterial biofilm formation: a non-bactericidal approach to inhibiting biofilm formation in Pseudomonas aeruginosa

We report an approach to preventing bacterial biofilm formation that is based on the surface-mediated release of 5,6-dimethyl-2-aminobenzimidazole (DMABI), a potent and non-bactericidal small-molecule inhibitor of bacterial biofilm growth. Our results demonstrate that DMABI can be encapsulated in thin films of a model biocompatible polymer [poly(lactide-co-glycolide), PLG] and be released in quantities that inhibit the formation of Pseudomonas aeruginosa biofilms by up to 75-90% on surfaces that otherwise support robust biofilm growth. This approach enables the release of this new anti-biofilm agent for over one month, and it can be used to inhibit biofilm growth on both film-coated surfaces and other adjacent surfaces (e.g., on other uncoated surfaces and at air/water interfaces). Our results demonstrate a non-bactericidal approach to the prevention of biofilm growth and provide proof of concept using a clinically relevant human pathogen. In contrast to coatings designed to kill bacteria on contact, this approach should also permit the design of strategically placed depots that disseminate DMABI more broadly and exert inhibitory effects over larger areas. In a broader context, the non-bactericidal nature of DMABI could also provide opportunities to address concerns related to evolved resistance that currently face approaches based on the release of traditional microbicidal agents (e.g., antibiotics). Finally, the results of initial in vitro mammalian cell culture studies indicate that DMABI is not toxic to cells at concentrations required for strong anti-biofilm activity, suggesting that this new agent is well suited for further investigation in biomedical and personal care contexts.

A biodegradable thermoset polymer made by esterification of citric acid and glycerol

A new biomaterial, a degradable thermoset polymer, was made from simple, economical, biocompatable monomers without the need for a catalyst. Glycerol and citric acid, nontoxic and renewable reagents, were crosslinked by a melt polymerization reaction at temperatures from 90 to 150°C. Consistent with a condensation reaction, water was determined to be the primary byproduct. The amount of crosslinking was controlled by the reaction conditions, including temperature, reaction time, and ratio between glycerol and citric acid. Also, the amount of crosslinking was inversely proportional to the rate of degradation. As a proof-of-principle for drug delivery applications, gentamicin, an antibiotic, was incorporated into the polymer with preliminary evaluations of antimicrobial activity. The polymers incorporating gentamicin had significantly better bacteria clearing of Staphylococcus aureus compared to non-gentamicin gels for up to 9 days.

Staphylococcus aureus supernatant induces the release of mouse β-defensin-14 from osteoblasts via the p38 MAPK and NF-κB pathways

Mammalian β-defensins are small cationic peptides of approximately 2-6 kDa that have been implicated in mediating innate immune defenses against microbial infection. Previous studies have reported that mouse β-defensin-14 (MBD‑14), based on structural and functional similarities, appears to be an ortholog of human β-defensin-3 (HBD-3). The aim of this study was to identify the signaling pathways that contribute to the expression of MBD-14 in mouse osteoblasts (OBs) upon contact with methicillin-resistant Staphylococcus aureus (S. aureus) supernatant (SAS) to provide a theoretical basis for the use of MDB-14 as a therapeutic agent in the treatment of intramedullary infection with S. aureus in vivo. The bacterial exoproducts released by S. aureus mainly include a large amount of enterotoxins. Using mouse OBs, the release and regulation of MBD-14 was evaluated by real-time polymerase chain reaction (PCR) and enzyme‑linked immunosorbent assay (ELISA) following exposure to SAS. The activation of the p38 mitogen‑activated protein kinase (MAPK), extracellular signal-regulated kinase (ERK) and nuclear factor-κB (NF-κB) pathways was determined by western blot analysis. OBs treated with lipopolysaccharide (LPS) were used as the positive control. The results revealed that SAS significantly promoted the phosphorylation of p38 MAPK, NF-κB and the inhibitory subunit of NF-κBα (IκBα) in a time-dependent manner. The treatment of OBs with SB203580 (an inhibitor of p38 MAPK) and pyrrolidine dithiocarbamate (PDTC, an inhibitor of NF-κB) prior to stimulation with SAS significantly inhibited the phosphorylation and mRNA expression of p38 MAPK and NF-κB p65, simultaneously reducing the release of MBD-14. Our findings suggest that the release of MBD-14 is mediated at least in part through the activation of p38 MAPK and NF-κB in response to S. aureus‑secreted bacterial exoproducts. Moreover, our data demonstrate the innate immune capacity of OBs under conditions of bacterial challenge to enhance the local expression of this MBD-14, a peptide with anti‑staphylococcal activity.

A new type of biphasic calcium phosphate cement as a gentamicin carrier for osteomyelitis

Osteomyelitis therapy is a long-term and inconvenient procedure for a patient. Antibiotic-loaded bone cements are both a complementary and alternative treatment option to intravenous antibiotic therapy for the treatment of osteomyelitis. In the current study, the biphasic calcium phosphate cement (CPC), called α-TCP/HAP (α-tricalcium phosphate/hydroxyapatite) biphasic cement, was prepared as an antibiotics carrier for osteomyelitis. The developed biphasic cement with a microstructure of α-TCP surrounding the HAP has a fast setting time which will fulfill the clinical demand. The X-ray diffraction and Fourier transform infrared spectrometry analyses showed the final phase to be HAP, the basic bone mineral, after setting for a period of time. Scanning electron microscopy revealed a porous structure with particle sizes of a few micrometers. The addition of gentamicin in α-TCP/HAP would delay the transition of α-TCP but would not change the final-phase HAP. The gentamicin-loaded α-TCP/HAP supplies high doses of the antibiotic during the initial 24 hours when they are soaked in phosphate buffer solution (PBS). Thereafter, a slower drug release is produced, supplying minimum inhibitory concentration until the end of the experiment (30 days). Studies of growth inhibition of Staphylococcus aureus and Pseudomonas aeruginosa in culture indicated that gentamicin released after 30 days from α-TCP/HAP biphasic cement retained antibacterial activity.

Osteomyelitis: an overview of antimicrobial therapy

Osteomyelitis is an inflammatory bone disorder caused by infection, leading to necrosis and destruction of bone. It can affect all ages, involve any bone, become a chronic disease and cause persistent morbidity. Treatment of osteomyelitis is challenging particularly when complex multiresistant bacterial biofilm has already been established. Bacteria in biofilm persist in a low metabolic phase, causing persistent infection due to increased resistance to antibiotics. Staphylococcus aureus and Staphylococcus epidermidis are the most common causative organism responsible for more than 50% of osteomyelitis cases. Osteomyelitis treatment implies the administration of high doses of antibiotics (AB) by means of endovenous and oral routes and should take a period of at least 6 weeks. Local drug delivery systems, using non-biodegradable (polymethylmethacrylate) or biodegradable and osteoactive materials such as calcium orthophosphates bone cements, have been shown to be promising alternatives for the treatment of osteomyelitis. These systems allow the local delivery of AB in situ with bactericidal concentrations for long periods of time and without the toxicity associated with other means of administration. This review examines the most recent literature evidence on the causes, pathogeneses and pharmacological treatment of osteomyelitis. The study methodology consisted of a literature review in Google Scholar, Science Direct, Pubmed, Springer link, B-on. Papers from 1979 till present were reviewed and evaluated.

Quaternized chitosan as an antimicrobial agent: antimicrobial activity, mechanism of action and biomedical applications in orthopedics

Chitosan (CS) is a linear polysaccharide with good biodegradability, biocompatibility and antimicrobial activity, which makes it potentially useful for biomedical applications, including an antimicrobial agent either alone or blended with other polymers. However, the poor solubility of CS in most solvents at neutral or high pH substantially limits its use. Quaternary ammonium CS, which was prepared by introducing a quaternary ammonium group on a dissociative hydroxyl group or amino group of the CS, exhibited improved water solubility and stronger antibacterial activity relative to CS over an entire range of pH values; thus, this quaternary modification increases the potential biomedical applications of CS in the field of anti-infection. This review discusses the current findings on the antimicrobial properties of quaternized CS synthesized using different methods and the mechanisms of its antimicrobial actions. The potential antimicrobial applications in the orthopedic field and perspectives regarding future studies in this field are also considered.

Human β-defensin 3 inhibits antibiotic-resistant Staphylococcus biofilm formation

BACKGROUND

Implantation-associated infections have increased significantly with the recent widespread use of medical implants. Treatments for these infections are not always successful because these infections are sometimes caused by multiantibiotic-resistant organisms. It is therefore particularly urgent to provide doctors with more effective antimicrobial agents against these antibiotic-resistant organisms. Human β-defensin 3 (hBD-3) has been shown to have strong broad-spectrum antibacterial activity. However, its effect on methicillin-resistant Staphylococcus epidermidis (MRSE) and methicillin-resistant Staphylococcus aureus (MRSA) in medical implant biofilm formation has not been reported.

METHODS

In this study, we evaluated the effects of hBD-3 on S epidermidis ATCC 35984 (methicillin-resistant strain), MRSE287, and MRSA (ATCC43300) by evaluating bacterial adhesion, biofilm formation, and maturation. In addition, we used the spread plate method, confocal laser scanning microscopy, scanning electron microscopy, and real-time polymerase chain reaction to evaluate the effect of hBD-3.

RESULTS

After evaluating biofilm adhesion and formation, we found that the number of each strain on the titanium surface was decreased in those groups exposed to 1MIC (minimum inhibitory concentration) of hBD-3 and was significantly lower than the number of colonies of the control. In the initial maturation of the biofilm, the numbers of each strain on the titanium surface from the 2MIC to 6MIC groups were significantly lower than the control. When the concentrations were further increased, hBD-3 was significantly effective against drug-resistant bacteria from the biofilms.

CONCLUSIONS

HBD-3 has the potential to eliminate the biofilm formation of Staphylococcus, especially antibiotic-resistant strains, effectively.

Smart bandages--a colourful approach to early stage infection detection & control in wound care

With the recent increase in bacterial resistance to conventional antibiotics, the early-stage detection and control of infection has become imperative in the fight against opportunistic pathogens in healthcare. The traditional β-lactam wonder-drugs (e.g. penicillin and cephalosporins), are rendered inactive due to enzymatic hydrolysis by bacterial β-lactamase enzymes as a bacterial defence mechanism. However, this deactivation mechanism produces different responses in the two aforementioned drugs - with the cephalosporins showing a molecular rearrangement mechanism which could be utilised for prodrug delivery. This unique mechanism could mean that inactive forms of cephalosporin antibiotics, once used as chemotherapeutics in oncology, could once again be used in the fight against disease as sensors to detect and treat bacterial colonisation. Therefore, we hypothesize that cephalosporin-dye bandages might provide an effective method to visually detect, and subsequently control, the early stages of an infection using photoantimicrobial chemotherapy (PACT).

Diazeniumdiolate-doped poly(lactic-co-glycolic acid)-based nitric oxide releasing films as antibiofilm coatings

Nitric oxide (NO) releasing films with a bilayer configuration are fabricated by doping dibutyhexyldiamine diazeniumdiolate (DBHD/N2O2) in a poly(lactic-co-glycolic acid) (PLGA) layer and further encapsulating this base layer with a silicone rubber top coating. By incorporating pH sensitive dyes within the films, pH changes in the PLGA layer are visualized and correlated with the NO release profiles (flux vs. time). It is demonstrated that PLGA acts as both a promoter and controller of NO release from the coating by providing protons through its intrinsic acid residues (both end groups and monomeric acid impurities) and hydrolysis products (lactic acid and glycolic acid). Control of the pH changes within the PLGA layer can be achieved by adjusting the ratio of DBHD/N2O2 and utilizing PLGAs with different hydrolysis rates. Coatings with a variety of NO release profiles are prepared with lifetimes of up to 15 d at room temperature (23 °C) and 10 d at 37 °C. When incubated in a CDC flow bioreactor for a one week period at RT or 37 °C, all the NO releasing films exhibit considerable antibiofilm properties against gram-positive Staphylococcus aureus and gram-negative Escherichia coli. In particular, compared to the silicone rubber surface alone, an NO releasing film with a base layer of 30 wt% DBHD/N2O2 mixed with poly(lactic acid) exhibits an ∼98.4% reduction in biofilm biomass of S. aureus and ∼99.9% reduction for E. coli at 37 °C. The new diazeniumdiolate-doped PLGA-based NO releasing coatings are expected to be useful antibiofilm coatings for a variety of indwelling biomedical devices (e.g., catheters).

Physical characterization and osteogenic activity of the quaternized chitosan-loaded PMMA bone cement

Gentamicin-loaded polymethylmethacrylate (PMMA), widely used for primary cemented arthroplasty and revision surgery for preventing or treating infections, may lead to the evolution of antibiotic-resistant bacteria and dysfunction of osteogenic cells, which further influence the osteointegration of bone cement. In a previous study, we reported that a new quaternized chitosan derivative (hydroxypropyltrimethyl ammonium chloride chitosan, HACC) that was loaded into PMMA significantly inhibited the formation of biofilms caused by methicillin-resistant Staphylococcus strains. In the present study, we further investigated the surface morphology, hydrophilicity, apatite formation ability and osteogenic activity of HACC-loaded PMMA. Chitosan-loaded PMMA, gentamicin-loaded PMMA and PMMA without antibiotic were also investigated and compared. The results showed that, compared to other PMMA-based cements, HACC-loaded PMMA had improved properties such as a lower polymerization temperature, prolonged setting time, porous structures after immersion in phosphate-buffered saline, higher hydrophilicity, more apatite formation on the surface after immersion in simulated body fluid, and better attachment and spreading of the human-marrow-derived mesenchymal stem cells. We also found better stem cell proliferation, osteogenic differentiation, and osteogenesis-associated genes expression on the surface of the HACC-loaded PMMA compared to the gentamicin-loaded PMMA. Therefore, this new anti-infective bone cement had improved physical properties and osteogenic activity, which may lead to better osteointegration of the bone cement in cemented arthroplasty.

A gentamicin-releasing coating for cementless hip prostheses-Longitudinal evaluation of efficacy using in vitro bio-optical imaging and its wide-spectrum antibacterial efficacy

Cementless prostheses are increasingly popular in total hip arthroplasties. Therewith, common prophylactic measures to reduce the risk of postoperative infection like the use of antibiotic-loaded bone cements, will no longer be available. Alternative prophylactic measures may include the use of antibiotic-releasing coatings. Previously, we developed a gentamicin-releasing coating for cementless titanium hip prostheses and derived an appropriate dosing of this coating by adjusting the amount of gentamicin in the coating to match the antibacterial efficacy of clinically employed gentamicin-loaded bone cement. In this manuscript, we investigated two important issues regarding the prophylactic use of this 1 mg cm(-2) bioactive gentamicin-releasing coating in cementless total hip arthroplasty: (1) its ability to prevent bacterial growth in a geometrically relevant set-up and (2) its antibacterial spectrum. A geometrically relevant set-up was developed in which miniature titanium stems were surrounded by agar, contaminated with bioluminescent Staphylococcus aureus. Novel, bio-optical imaging was performed allowing noninvasive, longitudinal monitoring of staphylococcal growth around miniature stems with and without the gentamicin-releasing coating. Furthermore, the antibacterial efficacy of the gentamicin-releasing coating was determined against a wide variety of clinical isolates, including bioluminescent Staphylococcus aureus strains, using traditional zone of inhibition measurements. The gentamicin-releasing coating demonstrated a wide-spectrum of antibacterial efficacy and successfully prevented growth of bioluminescent staphylococci around a miniature stem mounted in bacterially contaminated agar for at least 60 h. This implies that the gentamicin-releasing coating has potential to contribute to the improvement of infection prophylaxis in cementless total hip arthroplasty.

Biofilm formation in Staphylococcus implant infections. A review of molecular mechanisms and implications for biofilm-resistant materials

Implant infections in orthopaedics, as well as in many other medical fields, are chiefly caused by staphylococci. The ability of growing within a biofilm enhances the chances of staphylococci to protect themselves from host defences, antibiotic therapies, and biocides. Advances in scientific knowledge on structural molecules (exopolysaccharide, proteins, teichoic acids, and the most recently described extracellular DNA), on the synthesis and genetics of staphylococcal biofilms, and on the complex network of signal factors that intervene in their control are here presented, also reporting on the emerging strategies to disrupt or inhibit them. The attitude of polymorphonuclear neutrophils and macrophages to infiltrate and phagocytise biofilms, as well as the ambiguous behaviour exhibited by these innate immune cells in biofilm-related implant infections, are here discussed. Research on anti-biofilm biomaterials is focused, reviewing materials loaded with antibacterial substances, or coated with anti-adhesive/anti-bacterial immobilized agents, or surfaced with nanostructures. Latter approaches appear promising, since they avoid the spread of antibacterial substances in the neighbouring tissues with the consequent risk of inducing bacterial resistance.

Bone grafts as vancomycin carriers in local therapy of resistant infections

The level of an antibiotic capable of inhibiting the etiological agent at the site of infection is an essential prerequisite for successful antibiotic therapy. In some cases, locally applied antibiotics may compensate for limitations of systemic administration and shorten systemic therapy. We aimed at verifying to what extent vancomycin (Van) bound to ground bone grafts is usable in the treatment of serious infections. The levels of released Van significantly exceeded the Van minimum inhibitory concentration, which can suppress Van-sensitive staphylococci and Van intermediate Staphylococcus aureus, for the whole period of a 16-day measurement. Our results indicate that bone grafts can be used as Van carriers in therapy of osteomyelitis caused by Van-sensitive Staphylococcus strains.

Copper and silver ion implantation of aluminium oxide-blasted titanium surfaces: proliferative response of osteoblasts and antibacterial effects

Implant infection still represents a major clinical problem in orthopedic surgery. We therefore tested the in vitro biocompatibility and antibacterial effects of copper (Cu)- and silver (Ag)-ion implantation. Discs of a commonly used titanium alloy (Ti6AlV4) with an aluminium oxide-blasted surface were treated by Cu- or Ag-ion implantation with different dosage regimen (ranging from 1e15-17 ions cm(-2) at energies of 2-20 keV). The samples were seeded with primary human osteoblasts and cell attachment and proliferation was analyzed by an MTT-assay. In comparison to the reference titanium alloy there was no difference in the number of attached viable cells after two days. After seven days the number of viable cells was increased for Cu with 1e17 ions cm(-2) at 2 and 5 keV, and for Ag with 1e16 ions cm(-2) at 5 keV while it was reduced for the highest amount of Ag deposition (1e17 ions cm(-2) at 20 keV). Antibacterial effects on S.aureus and E.coli were marginal for the studied dosages of Cu but clearly present for Ag with 1e16 ions cm(-2) at 2 and 5 keV and 1e17 ions cm(-2) at 20 keV. These results indicate that Ag-ion implantation may be a promising methodological approach for antibacterial functionalization of titanium implants.

Characterization of daptomycin-loaded antibiotic cement

Antibiotics are commonly mixed with polymethylmethacrylate (PMMA) cement to suppress severe periprosthetic infections associated with total joint arthroplasty. The relationship between antibiotic concentration and the resulting elution kinetics remains unclear. The purpose of this study was to characterize the release of daptomycin from PMMA cement and the subsequent effects on mechanical properties.Varying concentrations of daptomycin and tobramycin were vacuum mixed in commercially available PMMA and subjected to an in vitro elution period. High-performance liquid chromatography was used to quantify the concentration of the amount of daptomycin eluted at predetermined time points. Samples were subjected to compressive loading to analyze the effect of antibiotic concentration on cement mechanical properties. Daptomycin elution increased when initial tobramycin concentration was increased. Furthermore, the addition of antibiotics increased the compressive strength of the cement in the postelution period. The binary addition of tobramycin with daptomycin antibiotics modifies the elution and mechanical properties of PMMA bone cement. Based on the findings of our study, 2 g of daptomycin and 3.6 g of tobramycin per 40-g packet of cement should be used to promote daptomycin elution without sacrificing PMMA mechanical properties.

Analysis of the release characteristics of cu-treated antimicrobial implant surfaces using atomic absorption spectrometry

New developments of antimicrobial implant surfaces doped with copper (Cu) ions may minimize the risk of implant-associated infections. However, experimental evaluation of the Cu release is influenced by various test parameters. The aim of our study was to evaluate the Cu release characteristics in vitro according to the storage fluid and surface roughness. Plasma immersion ion implantation of Cu (Cu-PIII) and pulsed magnetron sputtering process of a titanium copper film (Ti-Cu) were applied to titanium alloy (Ti6Al4V) samples with different surface finishing of the implant material (polished, hydroxyapatite and corundum blasted). The samples were submersed into either double-distilled water, human serum, or cell culture medium. Subsequently, the Cu concentration in the supernatant was measured using atomic absorption spectrometry. The test fluid as well as the surface roughness can alter the Cu release significantly, whereby the highest Cu release was determined for samples with corundum-blasted surfaces stored in cell medium.

Emerging Pathogenetic Mechanisms of the Implant-Related Osteomyelitis by Staphylococcus Aureus

Implant-related osteomyelitis is a severe and deep infection of bone that arises and develops all around an implant. Staphylococcus aureus is the first cause of osteomyelitis, whether implant-related or not. Bone is an optimal substratum for S. aureus, since this bacterium expresses various adhesins by which can adhere to bone proteins and to the biomaterial surfaces coated with the proteins of the host extracellular matrix. S. aureus is able not only to colonize bone tissues, but also to invade and disrupt them by entering bone cells and inducing cell death and osteolysis. Here we illustrate the pathogenetic mechanisms that can explain how the osteomyelitis sets in and develops around an implant.

Vitamin E blended UHMWPE may have the potential to reduce bacterial adhesive ability

Biomaterial-associated infection (BAI), a clinical problem resulting in septic failure of joint replacement implants, is initiated by bacterial adhesion, often by Staphylococcus epidermidis. Ultra high molecular weight polyethylene (UHMWPE) is a material of choice for joint replacement; reducing the adhesion of S. epidermidis to the polymer could be a means to decrease infection. We examined the adhesion of two ATCC and one clinical strain of S. epidermidis to standard polyethylene (PE), vitamin E blended UHMWPE (VE-PE), and oxidized UHMWPE (OX-PE) after different incubation times: a significant (p < 0.01) decrease in the adhered staphylococci on VE-PE and a significantly higher incidence of the dislodged biofilm bacteria on OX-PE was observed compared with that registered on PE. With attenuated total reflectance (ATR)-FTIR spectroscopy before and after suspension in bacterial medium for 48 h, new absorptions were observed mainly in OX-PE, indicating adsorption of protein-like substances on the polymer surface. We hypothesized that the different hydrophilicity of the surfaces with different chemical characteristics influenced protein adsorption and bacterial adhesion. These results may have clinical implications concerning the prevention of septic loosening: the VE-PE could have the potential to reduce S. epidermidis adhesive ability if the preliminary data observed in these selected strains is further confirmed, as diversity among clinical strains is well known.