Enzymes on material surfaces

Covalent immobilization of lysozyme on ethylene vinyl alcohol films for nonmigrating antimicrobial packaging applications

The objective of this study was to develop a new antimicrobial film, in which lysozyme was covalently attached onto two different ethylene vinyl alcohol copolymers (EVOH 29 and EVOH 44). The EVOH surface was modified with UV irradiation treatment to generate carboxylic acid groups, and lysozyme was covalently attached to the functionalized polymer surface. Surface characterization of control and modified films was performed using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and dye assay. The value of protein loading after attachment on the surface was 8.49 μg protein/cm(2) and 5.74 μg protein/cm(2) for EVOH 29 and EVOH 44, respectively, after 10 min UV irradiation and bioconjugation. The efficacy of the EVOH-lysozyme films was assessed using Micrococcus lysodeikticus. The antimicrobial activity of the films was tested against Listeria monocytogenes and was similar to an equivalent amount of free enzyme. The reduction was 1.08 log for EVOH 29-lysozyme, 0.95 log for EVOH 44-lysozyme, and 1.34 log for free lysozyme. This work confirmed the successful use of lysozyme immobilization on the EVOH surface for antimicrobial packaging.

Functionalized ceramics for biomedical, biotechnological and environmental applications

Surface functionalization has become of paramount importance and is considered a fundamental tool for the development and design of countless devices and engineered systems for key technological areas in biomedical, biotechnological and environmental applications. In this review, surface functionalization strategies for alumina, zirconia, titania, silica, iron oxide and calcium phosphate are presented and discussed. These materials have become particularly important concerning the aforementioned applications, being not only of great academic, but also of steadily increasing human and commercial, interest. In this review, special emphasis is given to their use as biomaterials, biosensors, biological targets, drug delivery systems, implants, chromatographic supports for biomolecule purification and analysis, and adsorbents for toxic substances and pollutants. The objective of this review is to provide a broad picture of the enormous possibilities offered by surface functionalization and to identify particular challenges regarding surface analysis and characterization.

Development of antimicrobial packaging materials with immobilized glucose oxidase and lysozyme

Packaging based on immobilization of antimicrobial enzymes provides a promising form of active packaging systems applicable in food processing. Glucose oxidase and lysozyme were immobilized by the Ugi reaction with cyclohexyl isocyanide and glutaraldehyde on polyamide and ionomer films partially hydrolysed by hydrochloric acid. The immobilization of the enzymes on the surface of films was confirmed by FT-IR spectroscopy and the films were characterized by the specific activity of the immobilized enzymes. The enzyme migration into model solutions and the effect of pH, temperature and storage time on the activity of immobilized enzyme were also evaluated. Immobilization of lysozyme onto polyamide and ionomer films resulted in the loss of enzyme activity. The polyamide and ionomer films with immobilized glucose oxidase inhibited the growth of bacteria Escherichia coli CNCTC 6859, Pseudomonas fluorescens CNCTC 5793, Lactobacillus helveticus CH-1, Listeria ivanovii CCM 5884 and Listeria innocua CCM 4030 on agar media.

Pressure-induced protein adsorption at aqueous-solid interfaces

There seems to be a general relation between the standard Gibbs energy change of unfolding, ΔG°unf, of a protein and its affinity to aqueous-solid interfaces. So-called "hard" proteins (ΔG°unf is large) are found to adsorb less strongly to such interfaces than "soft" proteins (ΔG°unf is small). Here, we provide direct support for this rule by using high pressure to modulate the folding stability of a protein. We have performed high-pressure total internal reflection fluorescence (HP-TIRF) spectroscopy and high-pressure neutron reflectometry (HP-NR) to measure the degree of adsorption and the structure of lysozyme on planar solid surfaces as a function of pressure for the first time. By carrying out these experiments at hydrophilic and hydrophobic surfaces with varying concentrations of glycerol, we have found strong evidence that ΔG°unf has indeed a direct influence. At high pressures, there is a larger degree of lysozyme adsorption, probably because lysozyme becomes a "soft" protein under these conditions. The results of this study demonstrate that high pressure is a very useful tool to explore thermodynamics of protein-interface interactions.

Protein adsorption onto nanozeolite: effect of micropore openings

A clear and deep understanding of protein adsorption on porous surfaces is desirable for the reasonable design and applications of porous materials. In this study, the effect of surface micropores on protein adsorption was systematically investigated by comparing adsorption behavior of cytochrome c (Cyto-c) and Candida antarctica Lipase B (CALB) on porous and non-porous nanozeolites silicalite-1 and Beta. It was found that micropore openings on the surface of nanozeolites played a key role in determining adsorption affinity, conformations, and activities of proteins. Both Cyto-c and CALB showed higher affinity to porous nanozeolites than to non-porous ones, resulting in greater conformational change of proteins on porous surfaces which in turn affected their bio-catalytic performance. The activity of Cyto-c improved while that of CALB decreased on porous nanozeolites. Recognition of certain amino acid residues or size-matching secondary structures by micropore openings on the surface of nanozeolites was proposed to be the reason. Moreover, the pore opening effect of porous nanozeolites on protein behavior could be altered by changing protein coverage on them. This study gives a novel insight into the interaction between proteins and microporous materials, which will help to guide the rational fabrication and bio-applications of porous materials in the future.

Bifunctional immobilization of a hyperthermostable endo-β-1,3-glucanase

Laminarinase A (LamA) from Pyrococcus furiosus is a hyperthermostable endo-β-1,3-glucanase (EC 3.2.1.39) belonging to the glycosyl hydrolase family GH16. Here, we report the two-step immobilization of LamA on macroporous acrylic epoxy beads, extra-functionalized with disulfide groups. To facilitate initial immobilization via thiol-disulfide exchange, we introduced, by site-directed mutagenesis, a superficial cysteine residue near the protein C-terminal end. The thus-obtained S296C variant showed similar catalytic properties as native LamA. The activity of immobilized S296C displayed an inverse relationship with particle size. Use of conventional beads (150-300 μm in diameter) obstructed the catalytic efficiency due to pore diffusion limitation of the polysaccharide substrate. Bifunctional attachment to milled beads (20-40 μm) resulted in high enzyme load and outstanding catalytic features. Bifunctional immobilized S296C showed extreme pH stability and could be repeatedly used at 60 °C without significant activity loss.

Layer by layer assembly of a biocatalytic packaging film: lactase covalently bound to low-density polyethylene

Active packaging is utilized to overcome limitations of traditional processing to enhance the health, safety, economics, and shelf life of foods. Active packaging employs active components to interact with food constituents to give a desired effect. Herein we describe the development of an active package in which lactase is covalently attached to low-density polyethylene (LDPE) for in-package production of lactose-free dairy products. The specific goal of this work is to increase the total protein content loading onto LDPE using layer by layer (LbL) deposition, alternating polyethylenimine, glutaraldehyde (GL), and lactase, to enhance the overall activity of covalently attached lactase. The films were successfully oxidized via ultraviolet light, functionalized with polyethylenimine and glutaraldehyde, and layered with immobilized purified lactase. The total protein content increased with each additional layer of conjugated lactase, the 5-layer sample reaching up to 1.3 μg/cm2 . However, the increase in total protein did not lend to an increase in overall lactase activity. Calculated apparent Km indicated the affinity of immobilized lactase to substrate remains unchanged when compared to free lactase. Calculated apparent turnover numbers (kcat ) showed with each layer of attached lactase, a decrease in substrate turnover was experienced when compared to free lactase; with a decrease from 128.43 to 4.76 s(-1) for a 5-layer conjugation. Our results indicate that while LbL attachment of lactase to LDPE successfully increases total protein mass of the bulk material, the adverse impact in enzyme efficiency may limit the application of LbL immobilization chemistry for bioactive packaging use.

Shine a light on immobilized enzymes: real-time sensing in solid supported biocatalysts

Enzyme immobilization on solid supports has been key to biotransformation development. Although technologies for immobilization have largely reached maturity, the resulting biocatalysts are not well understood mechanistically. One limitation is that their internal environment is usually inferred from external data. Therefore, biological consequences of the immobilization remain masked by physical effects of mass transfer, obstructing further development. Work reviewed herein shows that opto-chemical sensing performed directly within the solid support enables the biocatalyst's internal environment to be uncovered quantitatively and in real time. Non-invasive methods of intraparticle pH and O2 determination are presented, and their use as process analytical tools for development of heterogeneous biocatalysts is described. Method diversification to other analytes remains a challenging task for the future.

Enhanced catalytic activity from proteinoid microspheres

Creating materials that are capable of catalyzing enzymatic reactions could be important to the treatment of both acute and chronic wounds, as well as other topical diseases. As a first step in the design of catalytic biomaterials, a new class of proteinoid microsphere (PM), that includes amino acids found in phosphatase enzyme active sites, has been constructed. This material can significantly enhance catalytic activity for phosphoester hydrolysis, with observed specific activity increases between 35- and 55-fold. Further specific activity increases occur when metal cations, notably iron or zinc, are added to the PMs. Specific activity increases between 140- and 300-fold for these metal modified systems are measured. The phosphatase activity increase is demonstrated for both aromatic phosphate esters as well as the high-energy phosphate bond of adenosine triphosphate. PMs bind substrate heterogeneously on their surfaces in an enthalpically driven reaction that is defined by an overall favorable free energy, but unfavorable entropy. The catalytic PMs have been successfully blended with polyolefin foam and extruded with PLA. These materials remain fully active.