Biodegradable polymers

A Review on the Modification of Polysaccharide Through Graft Copolymerization for Various Potential Applications

INTRODUCTION

Graft copolymerization is one of the most promising technique uses to modify the properties of naturally available polymers with a minimum loss in their native characteristics.

METHODS AND MATERIALS

Graft copolymerization is a very significant technique to add hybrid properties in backbone of polymers. The grafting generally initiated through the formation of free radical centers on the polymer backbone as well as monomer.

RESULTS

Grafted polysaccharides have various applications in different important scientific areas such as drug delivery, pharmaceutical field, plastic industry, waste water treatment, tannery effluent treatment, textile industry, agriculture area, etc. all of this fascinated us to summarize the major research articles over the last two decades outlining different methods of grafting, surface modification, graft copolymerization of synthetic and natural polymers.

CONCLUSION

Various redox initiator systems viz. Ceric ammonium nitrate, per sulfate, Irradiation, FAS-H2O2etc. is also explored for grafting of vinyl through conventional and non-conventional techniques.

Di-Block PLCL and Tri-Block PLCLG Matrix Polymeric Nanoparticles Enhanced the Anticancer Activity of Loaded 5-Fluorouracil

In the current study, 5-FU-loaded nanoparticles (NPs) were prepared using polylactic-co-glycolic acid (PLGA), polycaprolactone (PCL), di-block poly lactide-co-caprolactone (PLCL) and tri-block poly L-lactide-co-caprolactone-co-glycolide (PLCLG). The influence of these polymers on the particle sizes, morphology, drug loading, and in vitro drug release was investigated. The anticancer activity was assessed utilizing MTT assay in three human cancer cell lines of different tissue origin; brain (Daoy), liver (HepG2), and colorectal (HT29) using suitable negative and positive controls. The prepared NPs showed a uniform spherical shape with an average size range of 193.5± 6.3 to 303.5± 3.3 nm with negative zeta potential. The entrapment efficiency achieved with F4-F6 (block copolymer NPs) was 78-79% and significantly higher compared with F1 PLGA (31%) and F2; PCL (37%). An initial rapid 5-FU release followed by a slow release ranging from 35% to 81% after 72 h was observed. All the prepared NPs formulations showed enhancement in the cytotoxicity of 5-FU towards all the three cancer cell lines. Generally, block copolymer NPs (F4-F6) showed higher % cell death over PLGA (F1) and PCL (F2) NPs after 48 and 72 h incubation in the case of HepG2 and HT-29. The incorporation of PEG with the tri-block (F6) caused a significant increase in the cytotoxicity of NPs in all of the three cancer cell lines. Block copolymer-based NPs can be considered as promising carriers for enhancing the efficacy of 5-FU in cancer therapy.

3D Mimicry of Native-Tissue-Fiber Architecture Guides Tendon-Derived Cells and Adipose Stem Cells into Artificial Tendon Constructs

Tendon and ligament (T/L) function is intrinsically related with their unique hierarchically and anisotropically organized extracellular matrix. Their natural healing capacity is, however, limited. Here, continuous and aligned electrospun nanofiber threads (CANT) based on synthetic/natural polymer blends mechanically reinforced with cellulose nanocrystals are produced to replicate the nanoscale collagen fibrils grouped into microscale collagen fibers that compose the native T/L. CANT are then incrementally assembled into 3D hierarchical scaffolds, resulting in woven constructions, which simultaneously mimic T/L nano-to-macro architecture, nanotopography, and nonlinear biomechanical behavior. Biological performance is assessed using human-tendon-derived cells (hTDCs) and human adipose stem cells (hASCs). Scaffolds nanotopography and microstructure induce a high cytoskeleton elongation and anisotropic organization typical of tendon tissues. Moreover, the expression of tendon-related markers (Collagen types I and III, Tenascin-C, and Scleraxis) by both cell types, and the similarities observed on their expression patterns over time suggest that the developed scaffolds not only prevent the phenotypic drift of hTDCs, but also trigger tenogenic differentiation of hASCs. Overall, these results demonstrate a feasible approach for the scalable production of 3D hierarchical scaffolds that exhibit key structural and biomechanical properties, which can be advantageously explored in acellular and cellular T/L TE strategies.

Nanocellulose in green food packaging

The development of packaging materials with new functionalities and lower environmental impact is now an urgent need of our society. On one hand, the shelf-life extension of packaged products can be an answer to the exponential increase of worldwide demand for food. On the other hand, uncertainty of crude oil prices and reserves has imposed the necessity to find raw materials to replace oil-derived polymers. Additionally, consumers' awareness toward environmental issues increasingly pushes industries to look with renewed interest to "green" solutions. In response to these issues, numerous polymers have been exploited to develop biodegradable food packaging materials. Although the use of biopolymers has been limited due to their poor mechanical and barrier properties, these can be enhanced by adding reinforcing nanosized components to form nanocomposites. Cellulose is probably the most used and well-known renewable and sustainable raw material. The mechanical properties, reinforcing capabilities, abundance, low density, and biodegradability of nanosized cellulose make it an ideal candidate for polymer nanocomposites processing. Here we review the potential applications of cellulose based nanocomposites in food packaging materials, highlighting the several types of biopolymers with nanocellulose fillers that have been used to form bio-nanocomposite materials. The trends in nanocellulose packaging applications are also addressed.

Effect of Plasticizer Type on Tensile Property and In Vitro Indomethacin Release of Thin Films Based on Low-Methoxyl Pectin

This study developed the interests of low-methoxyl pectin (LMP) together with plasticizers for the preparation of elastic thin films. The effect of different plasticizer types (glycerol: Gly; sorbitol: Sor; propylene glycol: PG; and polyethylene glycol 300: PEG 300) and concentrations (20–40% w/w) on mechanical and thermal properties of LMP films as well as on in vitro release of indomethacin were evaluated. Without any plasticizer, a brittle LMP film with low tensile strength and % elongation at break was obtained. Addition of plasticizers from 20% to 40% caused reduction in the tensile strength and Young’s modulus values, whereas percent elongation was increased. Forty percent Gly-plasticized and PG-plasticized films were selected to deliver indomethacin in comparison with non-plasticized film. No significant difference in indomethacin release profiles was displayed between the films. The analysis of indomethacin release model indicated that more than one drug release mechanism from the film formulation was involved and possibly the combination of both diffusion and erosion. Even though indomethacin incorporated in non-plasticized film showed similar release profile, Gly or PG should be added to enhanced film flexibility and decrease film brittleness.

Enhanced gastric retention and drug release via development of novel floating microspheres based on Eudragit E100 and polycaprolactone: synthesis and in vitro evaluation

Eudragit E 100 and polycaprolactone (PCL) floating microspheres for enhanced gastric retention and drug release were successfully prepared by oil in water solvent evaporation method. Metronidazole benzoate, an anti-protozoal drug, was used as a model drug. Polyvinyl alcohol was used as an emulsifier. The prepared microspheres were observed for % recovery, % degree of hydration, % water uptake, % drug loading, % buoyancy and % drug release. The physico-chemical properties of the microspheres were studied by calculating encapsulation efficiency of microspheres and drug release kinetics. Drug release characteristics of microspheres were studied in simulated gastric fluid and simulated intestinal fluid i.e., at pH 1.2 and 7.4 respectively. Fourier transform infrared spectroscopy was used to reveal the chemical interaction between drug and polymers. Scanning electron microscopy was conducted to study the morphology of the synthesized microspheres.

Ecotoxicity testing of microplastics: Considering the heterogeneity of physicochemical properties

"Microplastic" is an umbrella term that covers many particle shapes, sizes, and polymer types, and as such the physical and chemical properties of environmental microplastics will differ from the primary microbeads commonly used for ecotoxicity testing. In the present article, we discuss the physical and chemical properties of microplastics that are potentially relevant to their ecotoxicity, including particle size, particle shape, crystallinity, surface chemistry, and polymer and additive composition. Overall, there is a need for a structured approach to the testing of different properties to identify which are the most relevant drivers of microplastic toxicity. In addition, the properties discussed will be influenced by and change depending on environmental conditions and degradation pathways. Future challenges include new technologies that will enter the plastic production cycle and the impact of these changes on the composition of environmental microplastics. Integr Environ Assess Manag 2017;13:470-475. © 2017 SETAC.

Mechanical properties and state of miscibility in poly(racD,L-lactide-co-glycolide)/(L-lactide-co-ε-caprolactone) blends

Polymers based on lactic acid (PLA) are a very promising category of biopolymers. As they are multi-stimuli responsive, can, in many ways, positively interact with the host, stimulating the innate reparative machinery of the human body. Since biopolymers for medical applications are subject to restrictive regulations, blending stands out as an effective method for obtaining tailored properties within a reduced time to market if compared to synthesis. Hence, in this study a set of PDLGA/PLCL blends was obtained by means of thermoplastic techniques and then further characterized. Evaluation techniques include GPC, NMR, DSC, tensile testing and SEM. Although mixtures proved to be immiscible, a full range of tensile properties was achieved. Observation of the surfaces of fracture provided visual evidence of the deformation mechanisms that occurred during the tensile tests which in the end led to failure. Interpretation of the thermal events based on molecular characterization parameters revealed phase separation, crystallization and plasticisation mechanisms that are relevant to any potential applications based on mechanical performance and shape memory behaviour.

Perspective highlights on biodegradable polymeric nanosystems for targeted therapy of solid tumors

Introduction: Polymeric nanoparticles (NPs) formulated using biodegradable polymers offer great potential for development of de novo drug delivery systems (DDSs) capable of delivering a wide range of bioactive agents. They can be engineered as advanced multifunctional nanosystems (NSs) for simultaneous imaging and therapy known as theranostics or diapeutics.

Methods: A brief prospective is provided on biomedical importance and applications of biodegradable polymeric NSs through reviewing the recently published literature.

Results: Biodegradable polymeric NPs present unique characteristics, including: nanoscaled structures, high encapsulation capacity, biocompatibility with non-thrombogenic and non-immunogenic properties, and controlled-/sustained-release profile for lipophilic and hydrophilic drugs. Once administered in vivo, all classes of biodegradable polymers (i.e., synthetic, semi-synthetic, and natural polymers) are subjected to enzymatic degradation; and hence, transformation into byproducts that can be simply eliminated from the human body. Natural and semi-synthetic polymers have been shown to be highly stable, much safer, and offer a non-/less-toxic means for specific delivery of cargo drugs in comparison with synthetic polymers. Despite being biocompatible and enzymatically-degradable, there are some drawbacks associated with these polymers such as batch to batch variation, high production cost, structural complexity, lower bioadhesive potential, uncontrolled rate of hydration, and possibility of microbial spoilage. These pitfalls have bolded the importance of synthetic counterparts despite their somewhat toxicity.

Conclusion: Taken all, to minimize the inadvertent effects of these polymers and to engineer much safer NSs, it is necessary to devise biopolymers with desirable chemical and biochemical modification(s) and polyelectrolyte complex formation to improve their drug delivery capacity in vivo.

Effect of Cold Drawing on Mechanical Properties of Biodegradable Fibers

Purpose

Biodegradable polymers are currently gaining importance in several fields, because they allow mitigation of the impact on the environment related to disposal of traditional, nonbiodegradable polymers, as well as reducing the utilization of oil-based sources (when they also come from renewable resources). Fibers made of biodegradable polymers are of particular interest, though, it is not easy to obtain polymer fibers with suitable mechanical properties and to tailor these to the specific application. The main ways to tailor the mechanical properties of a given biodegradable polymer fiber are based on crystallinity and orientation control. However, crystallinity can only marginally be modified during processing, while orientation can be controlled, either during hot drawing or cold stretching. In this paper, a systematic investigation of the influence of cold stretching on the mechanical and thermomechanical properties of fibers prepared from different biodegradable polymer systems was carried out.

Methods

Rheological and thermal characterization helped in interpreting the orientation mechanisms, also on the basis of the molecular structure of the polymer systems.

Results and conclusions

It was found that cold drawing strongly improved the elastic modulus, tensile strength and thermomechanical resistance of the fibers, in comparison with hot-spun fibers. The elastic modulus showed higher increment rates in the biodegradable systems upon increasing the draw ratio.

Sulfonation and Antioxidative Evaluation of Polysaccharides from Pleurotus Mushroom and Streptococcus thermophilus Bacteria: A Review

Human beings are equipped with antioxidant defense systems to neutralize free radicals as free radicals could damage macromolecules, subsequently resulting in serious diseases. Researchers have been attracted to search for potential natural antioxidants to reduce oxidative damage. Pleurotus and Streptococcus thermophilus have been chosen as sources of sustainable bioactive compounds that have been consumed for thousands of years. Polysaccharides are important bioactive components produced by Pleurotus mushrooms and Streptococcus thermophilus bacteria. Additionally, there is a continued interest in sulfonation of crude polysaccharides from both sources, since sulfonation has been found to improve or create new bioactive properties in polysaccharides. Both crude and sulfated polysaccharides with good antioxidant capacities have great potential for the further development as commercial products. This review focuses on characterization, sulfonation methods, and antioxidant capacity evaluations of polysaccharides from Pleurotus and S. thermophilus. Common antioxidant capacity assays, including the mechanisms underlying each assay, and various experimental procedures are also discussed.

The hydrolytic behavior of N,N′-(dimethylamino)ethyl acrylate-functionalized polymeric stars

Well-definedN,N′-(dimethylamino)ethyl acrylate (DMAEA) functionalized polymeric stars have been synthesizedviaan arm-first approach.

Investigations on Green Blends Comprising Biodegradable Polymer and Ionic Liquid

The green blends of an ionic liquid, 1-ethyl-3-propylimidazolium bis(trifluoromethanesulfonyl)imide {[EPrI][TFSI]}, and a biodegradable polymer, poly(3-hydroxybutyrate) (PHB), were investigated in this study. The influence of an ionic liquid on the crystallization behaviors of a biodegradable polymer was explored. In the blends, the presence of [EPrI][TFSI] decreased the Tg and Tm of PHB. Incorporating [EPrI][TFSI] in the blends reduced the degree of crystallinity of PHB, inferring that the [EPrI][TFSI] weakened the crystallization of PHB. It further showed retarded isothermal and non-isothermal crystallization for PHB with the presence of [EPrI][TFSI]. The smaller K and 1/t0.5 estimated by the Avrami equation for the blends indicated that [EPrI][TFSI] weakened the isothermal crystallization of PHB with exhibiting the slower crystallization rate. The present study also discussed non-isothermal crystallization of the blends. We found that the Mo model, which is generally used to discuss the non-isothermal crystallization, adequately described the non-isothermal behaviors of the [EPrI][TFSI]/PHB blends. By increasing the [EPrI][TFSI] content, the rate-related parameter F(T) systematically increased, inferring a decreased crystallization rate of PHB with the addition of [EPrI][TFSI] in the blends. The FTIR results suggested an ion⁻dipole interaction between [EPrI][TFSI] and PHB. This proposes the occurrence of possible complexation between [EPrI][TFSI] and PHB.

Synthesis, properties and biomedical applications of hydrolytically degradable materials based on aliphatic polyesters and polycarbonates

Polyester-based polymers represent excellent candidates in synthetic biodegradable and bioabsorbable materials for medical applications owing to their tailorable properties. The use of synthetic polyesters as biomaterials offers a unique control of morphology, mechanical properties and degradation profile through monomer selection, polymer composition (i.e. copolymer vs. homopolymer, stereocomplexation etc.) and molecular weight. Within this review, the synthetic routes, degradation modes and application of aliphatic polyester- and polycarbonate-based biomaterials are discussed.

Bioactive polymeric scaffolds for tissue engineering

A variety of engineered scaffolds have been created for tissue engineering using polymers, ceramics and their composites. Biomimicry has been adopted for majority of the three-dimensional (3D) scaffold design both in terms of physicochemical properties, as well as bioactivity for superior tissue regeneration. Scaffolds fabricated via salt leaching, particle sintering, hydrogels and lithography have been successful in promoting cell growth in vitro and tissue regeneration in vivo. Scaffold systems derived from decellularization of whole organs or tissues has been popular due to their assured biocompatibility and bioactivity. Traditional scaffold fabrication techniques often failed to create intricate structures with greater resolution, not reproducible and involved multiple steps. The 3D printing technology overcome several limitations of the traditional techniques and made it easier to adopt several thermoplastics and hydrogels to create micro-nanostructured scaffolds and devices for tissue engineering and drug delivery. This review highlights scaffold fabrication methodologies with a focus on optimizing scaffold performance through the matrix pores, bioactivity and degradation rate to enable tissue regeneration. Review highlights few examples of bioactive scaffold mediated nerve, muscle, tendon/ligament and bone regeneration. Regardless of the efforts required for optimization, a shift in 3D scaffold uses from the laboratory into everyday life is expected in the near future as some of the methods discussed in this review become more streamlined.

Biodegradation of engine oil by fungi from mangrove habitat

The pollution of land and water by petroleum compounds is a matter of growing concern necessitating the development of methodologies, including microbial biodegradation, to minimize the impending impacts. It has been extensively reported that fungi from polluted habitats have the potential to degrade pollutants, including petroleum compounds. The Red Sea is used extensively for the transport of oil and is substantially polluted, due to leaks, spills, and occasional accidents. Tidal water, floating debris, and soil sediment were collected from mangrove stands on three polluted sites along the Red Sea coast of Saudi Arabia and forty-five fungal isolates belonging to 13 genera were recovered from these samples. The isolates were identified on the basis of a sequence analysis of the 18S rRNA gene fragment. Nine of these isolates were found to be able to grow in association with engine oil, as the sole carbon source, under in vitro conditions. These selected isolates and their consortium accumulated greater biomass, liberated more CO2, and produced higher levels of extracellular enzymes, during cultivation with engine oil as compared with the controls. These observations were authenticated by gas chromatography-mass spectrophotometry (GC-MS) analysis, which indicated that many high mass compounds present in the oil before treatment either disappeared or showed diminished levels.

Micropatterning of silver nanoclusters embedded in polyvinyl alcohol films

Direct laser writing has been utilized to fabricate highly photostable fluorescent nanocluster microstructures in an organic polymer poly(methacrylic acid), where the carboxyl functional group is reported to play a vital role in nanocluster stabilization. In this Letter, we demonstrate that not only the polymer containing the carboxyl functional group, but also the polymer comprising the hydroxyl group, namely polyvinyl alcohol (PVA), can act as an appropriate stabilizer matrix for laser-induced synthesis and patterning of silver nanoclusters. The as-formed nanoclusters in the PVA film exhibit broadband emission and photostability comparable to the nanoclusters formed in the poly(methacrylic acid) polymer. As PVA is a widely used, nontoxic, biocompatible and biodegradable polymer, the technique of patterning fluorescent nanoclusters in PVA thin films is expected to find numerous applications in fields like fluorescence imaging, biolabeling, and sensing.

Review of Bionanocomposite Coating Films and Their Applications

The properties of a composite material depend on its constituent materials such as natural biopolymers or synthetic biodegradable polymers and inorganic or organic nanomaterials or nano-scale minerals. The significance of bio-based and synthetic polymers and their drawbacks on coating film application is currently being discussed in research papers and articles. Properties and applications vary for each novel synthetic bio-based material, and a number of such materials have been fabricated in recent years. This review provides an in-depth discussion on the properties and applications of biopolymer-based nanocomposite coating films. Recent works and articles are cited in this paper. These citations are ubiquitous in the development of novel bionanocomposites and their applications.