Two-Dimensional Metal Nanomaterials: Synthesis, Properties, and Applications

Emerging two-dimensional nanomaterials for electrochemical nitrogen reduction

Ammonia (NH₃) is essential to serve as the biological building blocks for maintaining organism function, and as the indispensable nitrogenous fertilizers for increasing the yield of nutritious crops. The current Haber-Bosch process for industrial NH₃ production is highly energy- and capital-intensive. In light of this, the electroreduction of nitrogen (N₂) into valuable NH₃, as an alternative, offers a sustainable pathway for the Haber-Bosch transition, because it utilizes renewable electricity and operates under ambient conditions. Identifying highly efficient electrocatalysts remains the priority in the electrochemical nitrogen reduction reaction (NRR), marking superior selectivity, activity, and stability. Two-dimensional (2D) nanomaterials with sufficient exposed active sites, high specific surface area, good conductivity, rich surface defects, and easily tunable electronic properties hold great promise for the adsorption and activation of nitrogen towards sustainable NRR. Therefore, this Review focuses on the fundamental principles and the key metrics being pursued in NRR. Based on the fundamental understanding, the recent efforts devoted to engineering protocols for constructing 2D electrocatalysts towards NRR are presented. Then, the state-of-the-art 2D electrocatalysts for N₂ reduction to NH₃ are summarized, aiming at providing a comprehensive overview of the structure-performance relationships of 2D electrocatalysts towards NRR. Finally, we propose the challenges and future outlook in this prospective area.

Recent advances in the exonuclease III-assisted target signal amplification strategy for nucleic acid detection

The detection of nucleic acids has become significantly important in molecular diagnostics, gene therapy, mutation analysis, forensic investigations and biomedical development, and so on. In recent years, exonuclease III (Exo III) as an enzyme in the 3'-5' exonuclease family has evolved as a frequently used technique for signal amplification of low level DNA target detection. Different from the traditional target amplification strategies, the Exo III-assisted amplification strategy has been used for target DNA detection through directly amplifying the amounts of signal reagents. The Exo III-assisted amplification strategy has its unique advantages and characters, because the character of non-specific recognition of Exo III can overcome the limitation of a target-to-probe ratio of 1 : 1 in the traditional nucleic acid hybridization assay and acquire higher sensitivity. In this review, we selectively discuss the recent advances in the Exo III-assisted amplification strategy, including the amplification strategy integrated with nanomaterials, biosensors, hairpin probes and other nucleic acid detection methods. We also discuss the strengths and limitations of each strategy and methods to overcome the limitations.

Atomically Thin Materials for Next-Generation Rechargeable Batteries

Atomically thin materials (ATMs) with thicknesses in the atomic scale (typically <5 nm) offer inherent advantages of large specific surface areas, proper crystal lattice distortion, abundant surface dangling bonds, and strong in-plane chemical bonds, making them ideal 2D platforms to construct high-performance electrode materials for rechargeable metal-ion batteries, metal-sulfur batteries, and metal-air batteries. This work reviews the synthesis and electronic property tuning of state-of-the-art ATMs, including graphene and graphene derivatives (GE/GO/rGO), graphitic carbon nitride (g-C₃N₄), phosphorene, covalent organic frameworks (COFs), layered transition metal dichalcogenides (TMDs), transition metal carbides, carbonitrides, and nitrides (MXenes), transition metal oxides (TMOs), and metal-organic frameworks (MOFs) for constructing next-generation high-energy-density and high-power-density rechargeable batteries to meet the needs of the rapid developments in portable electronics, electric vehicles, and smart electricity grids. We also present our viewpoints on future challenges and opportunities of constructing efficient ATMs for next-generation rechargeable batteries.

A highly efficient atomically thin curved PdIr bimetallene electrocatalyst

The multi-metallene with an ultrahigh surface area has great potential in precise tuning of surface heterogeneous d-electronic correlation by surface strain effect for the distinctive surface electronic structure, which is a brand new class of promising 2D electrocatalyst for sustainable energy device application. However, achieving such an atomically thin multi-metallene still presents a great challenge. Herein, we present a new synthetic method for an atomic-level palladium-iridium (PdIr) bimetallene with an average thickness of only ∼1.0 nm for achieving superior catalysis in the hydrogen evolution reaction (HER) and the formic acid oxidation reaction (FAOR). The curved PdIr bimetallene presents a top-ranked high electrochemical active area of 127.5 ± 10.8 m² g_Pd+Ir⁻¹ in the reported noble alloy materials, and exhibits a very low overpotential, ultrahigh activity and improved stability for HER and FAOR. DFT calculation reveals that the PdIr bimetallene herein has a unique lattice tangential strain, which can induce surface distortion while concurrently creating a variety of concave-convex featured micro-active regions formed by variously coordinated Pd sites agglomeration. Such a strong strain effect correlates the abnormal on-site active 4d¹⁰-t_2g-orbital Coulomb correlation potential and directly elevates orbital-electronegativity exposure within these active regions, resulting in a preeminent barrier-free energetic path for significant enhancement of FAOR and HER catalytic performance.

Seeded Synthesis of Unconventional 2H-Phase Pd Alloy Nanomaterials for Highly Efficient Oxygen Reduction

Crystal phase engineering of noble-metal-based alloy nanomaterials paves a new way to the rational synthesis of high-performance catalysts for various applications. However, the controlled preparation of noble-metal-based alloy nanomaterials with unconventional crystal phases still remains a great challenge due to their thermodynamically unstable nature. Herein, we develop a robust and general seeded method to synthesize PdCu alloy nanomaterials with unconventional hexagonal close-packed (hcp, 2H type) phase and also tunable Cu contents. Moreover, galvanic replacement of Cu by Pt can be further conducted to prepare unconventional trimetallic 2H-PdCuPt nanomaterials. Impressively, 2H-Pd₆₇Cu₃₃ nanoparticles possess a high mass activity of 0.87 A mg^-1_Pd at 0.9 V (vs reversible hydrogen electrode (RHE)) in electrochemical oxygen reduction reaction (ORR) under alkaline condition, which is 2.5 times that of the conventional face-centered cubic (fcc) Pd₆₉Cu₃₁ counterpart, revealing the important role of crystal phase on determining the ORR performance. After the incorporation of Pt, the obtained 2H-Pd₇₁Cu₂₂Pt₇ catalyst shows a significantly enhanced mass activity of 1.92 A mg^-1_Pd+Pt at 0.9 V (vs RHE), which is 19.2 and 8.7 times those of commercial Pt/C and Pd/C, placing it among the best reported Pd-based ORR electrocatalysts under alkaline conditions.

Two-dimensional biomaterials: material science, biological effect and biomedical engineering applications

To date, nanotechnology has increasingly been identified as a promising and efficient means to address a number of challenges associated with public health. In the past decade, two-dimensional (2D) biomaterials, as a unique nanoplatform with planar topology, have attracted explosive interest in various fields such as biomedicine due to their unique morphology, physicochemical properties and biological effect. Motivated by the progress of graphene in biomedicine, dozens of types of ultrathin 2D biomaterials have found versatile bio-applications, including biosensing, biomedical imaging, delivery of therapeutic agents, cancer theranostics, tissue engineering, as well as others. The effective utilization of 2D biomaterials stems from the in-depth knowledge of structure-property-bioactivity-biosafety-application-performance relationships. A comprehensive summary of 2D biomaterials for biomedicine is still lacking. In this comprehensive review, we aim to concentrate on the state-of-the-art 2D biomaterials with a particular focus on their versatile biomedical applications. In particular, we discuss the design, fabrication and functionalization of 2D biomaterials used for diverse biomedical applications based on the up-to-date progress. Furthermore, the interactions between 2D biomaterials and biological systems on the spatial-temporal scale are highlighted, which will deepen the understanding of the underlying action mechanism of 2D biomaterials aiding their design with improved functionalities. Finally, taking the bench-to-bedside as a focus, we conclude this review by proposing the current crucial issues/challenges and presenting the future development directions to advance the clinical translation of these emerging 2D biomaterials.

Emerging beyond-graphene elemental 2D materials for energy and catalysis applications

Elemental two-dimensional (2D) materials have emerged as promising candidates for energy and catalysis applications due to their unique physical, chemical, and electronic properties. These materials are advantageous in offering massive surface-to-volume ratios, favorable transport properties, intriguing physicochemical properties, and confinement effects resulting from the 2D ultrathin structure. In this review, we focus on the recent advances in emerging energy and catalysis applications based on beyond-graphene elemental 2D materials. First, we briefly introduce the general classification, structure, and properties of elemental 2D materials and the new advances in material preparation. We then discuss various applications in energy harvesting and storage, including solar cells, piezoelectric and triboelectric nanogenerators, thermoelectric devices, batteries, and supercapacitors. We further discuss the explorations of beyond-graphene elemental 2D materials for electrocatalysis, photocatalysis, and heterogeneous catalysis. Finally, the challenges and perspectives for the future development of elemental 2D materials in energy and catalysis are discussed.

Biodegradable freestanding rare-earth nanosheets promote multimodal imaging and delivers CRISPR-Cas9 plasmid against tumor

Designing nanomaterials for bio-imaging and drug delivery for advanced cancer therapy with biodegradability and biocompatibility is a promising but challenging frontier. Herein, we assembled biodegradable and biocompatible ultrathin rare-earth erbium/dysprosium nanosheets that improve contrast in multimodal bio-imaging settings (MRI and X-ray CT) and deliver CRISPR-Cas9 plasmid to treat tumors.

Facile Synthesis of PdCuRu Porous Nanoplates as Highly Efficient Electrocatalysts for Hydrogen Evolution Reaction in Alkaline Medium

Ru is a key component of electrocatalysts for hydrogen evolution reaction (HER), especially in alkaline media. However, the catalytic activity and durability of Ru-based HER electrocatalysts are still far from satisfactory. Here we report a solvothermal approach for the synthesis of PdCuRu porous nanoplates with different Ru compositions by using Pd nanoplates as the seeds. The PdCuRu porous nanoplates were formed through underpotential deposition (UPD) of Cu on Pd, followed by alloying Cu with Pd through interdiffusion and galvanic replacement between Cu atoms and Ru precursor simultaneously. When evaluated as HER electrocatalysts, the PdCuRu porous nanoplates exhibited excellent catalytic activity and durability. Of them, the Pd24Cu29Ru47/C achieved the lowest overpotential (40.7 mV) and smallest Tafel slope (37.5 mV dec−1) in an alkaline solution (much better than commercial Pt/C). In addition, the Pd24Cu29Ru47/C only lost 17% of its current density during a stability test for 10 h, while commercial Pt/C had a 59.5% drop under the same conditions. We believe that the electron coupling between three metals, unique porous structure, and strong capability of Ru for water dissociation are responsible for such an enhancement in HER performance.

Programming a "Crab Claw"-like DNA Nanomachine as a Super Signal Amplifier for Ultrasensitive Electrochemical Assay of Hg2

Herein, with skillfully engaging stable T-Hg²⁺-T bonding, a "Crab Claw"-like DNA nanomachine with concise and highly efficient assembly and enhanced recognition/conversion efficiency was engineered as a super signal amplifier, which was united with Pd@Cu@Pt multimetallic mesoporous nanomaterials (Pd@Cu@Pt MMNs) for ultrasensitive electrochemical assay of mercury ions (Hg²⁺). Specifically, the formed "Crab Claw"-like DNA nanomachine could simultaneously trigger four same cascade DNAzyme cleavage reactions with the help of Mg²⁺ DNAzyme for markedly converting target Hg²⁺ to enormous DNA segments labeled with ferrocene (Fc), improving the detection sensitivity. Subsequently, the prepared Pd@Cu@Pt MMNs could not only show commendable electrochemical catalysis to Fc but also act as an excellent immobilization matrix for capturing and accumulating abundant Fc around them to further strengthen the electrochemical signal. As a result, the well-designed electrochemical sensor could achieve a low limit of detection of 3.58 fM in the range from 10 fM to 100 nM for Hg²⁺detection. This strategy offers a simple and rapid avenue to detect heavy metal ions and shows promising application potential for environmental pollutant monitoring.

Functionalized Elastomers for Intrinsically Soft and Biointegrated Electronics

Elastomers are suitable materials for constructing a conformal interface with soft and curvilinear biological tissue due to their intrinsically deformable mechanical properties. Intrinsically soft electronic devices whose mechanical properties are comparable to human tissue can be fabricated using suitably functionalized elastomers. This article reviews recent progress in functionalized elastomers and their application to intrinsically soft and biointegrated electronics. Elastomers can be functionalized by adding appropriate fillers, either nanoscale materials or polymers. Conducting or semiconducting elastomers synthesized and/or processed with these materials can be applied to the fabrication of soft biointegrated electronic devices. For facile integration of soft electronics with the human body, additional functionalization strategies can be employed to improve adhesive or autonomous healing properties. Recently, device components for intrinsically soft and biointegrated electronics, including sensors, stimulators, power supply devices, displays, and transistors, have been developed. Herein, representative examples of these fully elastomeric device components are discussed. Finally, the remaining challenges and future outlooks for the field are presented.

Synthesis Methods of Obtaining Materials for Hydrogen Sensors

The development of hydrogen sensors has acquired a great interest from researchers for safety in fields such as chemical industry, metallurgy, pharmaceutics or power generation, as well as due to hydrogen’s introduction as fuel in vehicles. Several types of sensors have been developed for hydrogen detection, including resistive, surface acoustic wave, optical or conductometric sensors. The properties of the material of the sensitive area of the sensor are of great importance for establishing its performance. Besides the nature of the material, an important role for its final properties is played by the synthesis method used and the parameters used during the synthesis. The present paper highlights recent results in the field of hydrogen detection, obtained using four of the well-known synthesis and deposition methods: sol-gel, co-precipitation, spin-coating and pulsed laser deposition (PLD). Sensors with very good results have been achieved by these methods, which gives an encouraging perspective for their use in obtaining commercial hydrogen sensors and their application in common areas for society.

Arsenene-mediated multiple independently targeted reactive oxygen species burst for cancer therapy

The modulation of intracellular reactive oxygen species (ROS) levels is crucial for cellular homeostasis and determination of cellular fate. A sublethal level of ROS sustains cell proliferation, differentiation and promotes tumor metastasis, while a drastic ROS burst directly induces apoptosis. Herein, surface-oxidized arsenene nanosheets (As/As_xO_y NSs) with type II heterojunction are fabricated with efficient ·O₂⁻ and ¹O₂ production and glutathione consumption through prolonging the lifetime of photo-excited electron-hole pairs. Moreover, the portion of As_xO_y with oxygen vacancies not only catalyzes a Fenton-like reaction, generating ·OH and O₂ from H₂O₂, but also inactivates main anti-oxidants to cut off the “retreat routes” of ROS. After polydopamine (PDA) and cancer cell membrane (M) coating, the engineered As/As_xO_y@PDA@M NSs serve as an intelligent theranostic platform with active tumor targeting and long-term blood circulation. Given its narrow-band-gap-enabled in vivo fluorescence imaging properties, As/As_xO_y@PDA@M NSs could be applied as an imaging-guided non-invasive and real-time nanomedicine for cancer therapy.

Multifunctional materials with a number of effects are important for dealing with the complex environment in cancer therapy. Here, the authors report on surface-oxidized arsenene nanosheets coated with polydopamine and cancer cell membrane as a multi theranostic tumour targeting cancer therapy.

Reversible photoluminescence modulation of monolayer MoS2 on a ferroelectric substrate by light irradiation and thermal annealing

Monolayer semiconducting two-dimensional (2D) materials are strongly emerging materials for exploring the spin-valley coupling effect and fabricating novel optoelectronic devices due to their unique structural symmetry and band structures. Due to their atomic thickness, their excitonic optical response is highly sensitive to the dielectric environment. In this work, we present a novel approach to reversibly modulate the optical properties of monolayer molybdenum disulfide (MoS₂) via changing the dielectric properties of the substrate by laser irradiation and thermal annealing. We chose LiNbO₃ as the substrate and recorded the PL spectra of monolayer MoS₂ on LiNbO₃ substrates with positive (P⁺) and negative (P^-) ferroelectric polarities. A distinct PL intensity of the A peak was observed due to opposite doping by surface charges. Under light irradiation, the PL intensity of monolayer MoS₂ on P⁺ Fe₂O₃-doped LiNbO₃ gradually decreased with time due to the reduction of intrinsic p-doping, which originated from the drift of photo-excited electrons under a spontaneous polarization field and accumulation on the surface. The PL intensity was found to be restored by thermal annealing which could erase the charge redistribution. This study provides a strategy to reversibly modulate the optical properties of monolayer 2D materials on top of ferroelectric materials.

Rapid Aqueous Synthesis of Large-Size and Edge/Defect-Rich Porous Pd and Pd-Alloyed Nanomesh for Electrocatalytic Ethanol Oxidation

In this work, a facile aqueous synthesis strategy was used (complete in 5 min at room temperature) to produce large-size Pd, PdCu, and PdPtCu nanomeshes without additional organic ligands or solvent and the volume restriction of reaction solution. The obtained metallic nanomeshes possess graphene-like morphology and a large size of dozens of microns. Abundant edges (coordinatively unsaturated sites, steps, and corners), defects (twins), and mesopores are seen in the metallic ultrathin structures. The formation mechanism for porous Pd nanomeshes disclosed that they undergo oriented attachment growth along the ⟨111⟩ direction. Owing to structural and compositional advantages, PdCu porous nanomeshes with certain elemental ratios (e. g., Pd₈₇ Cu₁₃ ) presented enhanced electrocatalytic performance (larger mass activity, better CO tolerance and stability) toward ethanol oxidation.

The Lightest 2D Nanomaterial: Freestanding Ultrathin Li Nanosheets by In Situ Nanoscale Electrochemistry

As the lightest solid element and also the simplest metal, lithium (Li) is one of the best representations of quasi-free electron model in both bulk form and the reduced dimensions. Herein, the controlled growth of 2D ultrathin Li nanosheets is demonstrated by utilizing an in situ electrochemical platform built inside transmission electron microscope (TEM). The as-grown freestanding 2D Li nanosheets have strong structure-anisotropy with large lateral dimensions up to several hundreds of nanometers and thickness limited to just a few nanometers. The nanoscale dynamics of nanosheets growth are unraveled by in situ TEM imaging in real-time. Further density-functional theory calculations indicate that oxygen molecules play an important role in directing the anisotropic 2D growth of Li nanosheets through controlling the growth kinetics by their facet-specific capping. The plasmonic optical properties of the as-grown Li nanosheets are probed by cathodoluminescence spectroscopy equipped within TEM, and a broadband visible emission is observed that contains contributions of both in-plane and out-of-plane plasmon resonance modes.

Spatially Controlled Preparation of Layered Metallic-Semiconducting Metal Chalcogenide Heterostructures

Spatially controlled preparation of heterostructures composed of layered materials is important in achieving interesting properties. Although vapor-phased deposition methods can prepare vertical and lateral heterostructures, liquid-phased methods, which can enable scalable production and further solution processes, have shown limited controllability. Herein, we demonstrate by using wet chemical methods that metallic Sn_0.5Mo_0.5S₂ nanosheets can be deposited epitaxially on the edges of semiconducting SnS₂ nanoplates to form SnS₂/Sn_0.5Mo_0.5S₂ lateral heterostructures or coated on both the edges and basal surfaces of SnS₂ to give SnS₂@Sn_0.5Mo_0.5S₂ core@shell heterostructures. They also showed good light-to-heat conversion ability due to the metallic property of Sn_0.5Mo_0.5S₂. In particular, the core@shell heterostructure showed a higher photothermal conversion efficiency than the lateral counterpart, largely due to its randomly oriented and polycrystalline Sn_0.5Mo_0.5S₂ layers with larger interfacing area for multiple internal light scattering.

An Acceptor-π-Donor Structured Organic Chromophore for NIR Triggered Thermal Ablation of Tumor via DNA Damage-Mediated Apoptosis

INTRODUCTION

It will be challenging to develop high-performance organic chromophores for light-triggered thermal ablation of the tumor. Besides, the mechanisms of organic chromophores for tumor therapy remain unclear. Herein, an acceptor-π-donor (A-π-D) structured organic chromophore based on 2-dicyanomethylenethiazole named PTM was developed for photothermal therapy (PTT) of tumors.

METHODS AND RESULTS

Biocompatible PTM nanoparticles (PTM NPs) were fabricated by enclosing PTM with Pluronic F-127. The results of optical and photothermal properties of PTM NPs showed robust near-infrared (NIR) absorption, excellent photostability and high photothermal conversion efficiency (56.9%). The results of flow cytometry, fluorescence microscopy, apoptosis, CCK-8 assays and animal experiments showed that PTM NPs had a good killing effect on tumors under NIR laser irradiation. Furthermore, mechanistic studies, RNA-seq and biological analysis revealed that PTM NPs can cause tumor cell death via DNA damage-mediated apoptosis.

CONCLUSION

Light-induced thermal ablation effects of PTM NPs in vitro and vivo were surveyed. Collectively, our studies provided a new approach to developing a safe and effective photothermal agent for cancer treatment.

Differences and Similarities of Photocatalysis and Electrocatalysis in Two-Dimensional Nanomaterials: Strategies, Traps, Applications and Challenges

Photocatalysis and electrocatalysis have been essential parts of electrochemical processes for over half a century. Recent progress in the controllable synthesis of 2D nanomaterials has exhibited enhanced catalytic performance compared to bulk materials. This has led to significant interest in the exploitation of 2D nanomaterials for catalysis. There have been a variety of excellent reviews on 2D nanomaterials for catalysis, but related issues of differences and similarities between photocatalysis and electrocatalysis in 2D nanomaterials are still vacant. Here, we provide a comprehensive overview on the differences and similarities of photocatalysis and electrocatalysis in the latest 2D nanomaterials. Strategies and traps for performance enhancement of 2D nanocatalysts are highlighted, which point out the differences and similarities of series issues for photocatalysis and electrocatalysis. In addition, 2D nanocatalysts and their catalytic applications are discussed. Finally, opportunities, challenges and development directions for 2D nanocatalysts are described. The intention of this review is to inspire and direct interest in this research realm for the creation of future 2D nanomaterials for photocatalysis and electrocatalysis.

Controllable synthesis and characterization of Mg2SiO4 nanostructures via a simple hydrothermal route using carboxylic acid as capping agent and their photocatalytic performance for photodegradation of azo dyes

Magnesium silicate (forsterite) nanoparticles were synthesized by a facile hydrothermal method, and characterized using several techniques such as XRD, SEM, EDS, DRS, Raman, TEM, and FT-IR. Several carboxylic acid structures were applied to modify the morphology and surface properties of the as-prepared particles. In this manuscript, citric acid, maleic acid, and succinic acid were used as the carboxylic acid agents. The effect of changing the ratio of carboxylic acid agent to central metal on the morphology and photocatalytic behavior was evaluated. The activities of the Mg₂SiO₄ nanostructures as photocatalysts were assessed by the degradation of several azo dyes (Acid Blue 92, Acid Brown 14, and Acid Violet 7) under UV and Vis light irradiation. The degradation percentages of Acid Blue 92 were about 88% and 74% in the presence of Vis and UV light respectively, and the percentages for photodegradation of Acid Brown 14 were approximately 76% and 82% in the presence of Vis and UV light, respectively. Furthermore, the degradation percentages for Acid Violet 7 were 93% and 80% under UV and Vis light, respectively.

Mg₂SiO₄ nanostructures have been synthesized via a facile hydrothermal approach. The photocatalytic behavior of Mg₂SiO₄ nanostructures prepared by different carboxylic acids have been investigated to degrade azo dyes under UV and visible light.

Facile Synthesis of Pd@PtM (M = Rh, Ni, Pd, Cu) Multimetallic Nanorings as Efficient Catalysts for Ethanol Oxidation Reaction

Pt-based multimetallic nanorings with a hollow structure are attractive as advanced catalysts due to their fantastic structure feature. However, the general method for the synthesis of such unique nanostructures is still lack. Here we report the synthesis of Pd@PtM (M = Rh, Ni, Pd, Cu) multimetallic nanorings by selective epitaxial growth of Pt alloyed shells on the periphery of Pd nanoplates in combination with oxidative etching of partial Pd in the interior. In situ generation of CO and benzoic acid arising from interfacial catalytic reactions between Pd nanoplates and benzaldehyde are critical to achieve high-quality Pt-based multimetallic nanorings. Specifically, the in-situ generated CO promotes the formation of Pt alloyed shells and their epitaxial growth on Pd nanoplates. In addition, the as-formed benzoic acid and residual oxygen are responsible for selective oxidative etching of partial Pd in the interior. When evaluated as electrocatalysts, the Pd@PtRh nanorings exhibit remarkably enhanced activity and stability for ethanol oxidation reaction (EOR) compared to the Pd@PtRh nanoplates and commercial Pt/C due to their hollow nanostructures.

Recent Advances on Properties and Utility of Nanomaterials Generated from Industrial and Biological Activities

Today is the era of nanoscience and nanotechnology, which find applications in the field of medicine, electronics, and environmental remediation. Even though nanotechnology is in its emerging phase, it continues to provide solutions to numerous challenges. Nanotechnology and nanoparticles are found to be very effective because of their unique chemical and physical properties and high surface area, but their high cost is one of the major hurdles to its wider application. So, the synthesis of nanomaterials, especially 2D nanomaterials from industrial, agricultural, and other biological activities, could provide a cost-effective technique. The nanomaterials synthesized from such waste not only minimize pollution, but also provide an eco-friendly approach towards the utilization of the waste. In the present review work, emphasis has been given to the types of nanomaterials, different methods for the synthesis of 2D nanomaterials from the waste generated from industries, agriculture, and their application in electronics, medicine, and catalysis.

Single-parameter-tuned synthesis for shape-controlled gold nanocrystals stimulated by iron carbonyl

Shape-controlled synthesis is essential for functional nanomaterials, allowing deeper insights intothe relationship between the structures and the catalytic properties. Synthesis of nanocrystals with particular morphologies are usually studied independently among various synthetic methods, those underline that different surface capping ligands or shape-directing agents bring about disparate shapes. However, a single quantitative parameter method is still lacking to realize precise control of well-defined morphology nanocrystals, especially anisotropic structures, which is essential to understanding the growth process of nanocrystals. Herein, we proposed a single-parameter-tuned synthesis strategy for preparation of shape-controlled gold nanocrystals by regulating the amount of iron carbonyl, by which we produced highly monodisperse Au nanocrystals with various shapes in organic phase including nanoplates (diameter of 16.02 ± 1.13 nm and thickness of 5.35 ± 0.58 nm), nanorods (length of 37.53 ± 3.73 nm and width of 5.26 ± 0.37 nm) and nanospheres (diameter of 8.26 ± 0.38 nm). The single-parameter-tuned method reveals the dual roles of iron carbonyl for controlling the shapes of gold nanocrystals including reductant and oxidative etchant and empowers versatility in synthetic methodology for other noble metals. Moreover, catalytic activity shifting in shapes of nanocrystals was revealed based on the reduction of 4-nitrophenol, showing that the as-synthesized Au nanoplates displayed the enhanced catalytic performance with the lowest activation energy. Our work provides a brand-new pathway for shape-controlled synthesis of noble-metal nanocrystals and has a strong practical value in application fields.

Mechanical properties of aerospace epoxy composites reinforced with 2D nano-fillers: current status and road to industrialization

High-performance epoxy composites find application in the aerospace industry. Although epoxy is a high-performance polymer, its fracture toughness is compromised due to its highly cross-linked nature. Nanomaterials such as carbon nanotubes (CNTs), graphene derivatives, and inorganic 2-dimensional (2D) nanomaterials are being explored to improve epoxy composites' mechanical properties. Graphene is one of the most popular 2D nano-reinforcing agents for epoxy composites. Following graphene discovery, the research community's attention was brought to various other few-atom thick 2D nanomaterials. Hence, apart from graphene, inorganic nanosheets such as transition metal dichalcogenides (TMDs), hexagonal boron nitride (hBN), etc., are also being studied as modifiers for enhancing the mechanical performance of epoxy composites. Graphene, TMDs and hBN are known to possess a high aspect ratio, high specific surface area and inherently high mechanical strength and stiffness, contributing to a stronger and tougher composite. Despite that, the challenges associated with these nanomaterials, such as dispersion issues, lack of standardization, underlying health hazards, etc., have hampered their commercialization. It has been long past a decade since the discovery of graphene, yet there are concerns regarding the lab to industry scale-up, and health and environmental hazards associated with nanomaterials for the fabrication of aerospace composites. This review offers a comprehensive literature survey and a perspective into the possible ways of bridging the gaps between the laboratory research and industrialization of 2D nanosheet-filled epoxy composites.

Nano scale zero valent iron production methods applied to contaminated sites remediation: An overview of production and environmental aspects

The nano scale zero valent iron (nZVI) is the most used material in the remediation process. The inclusion of sustainability in the remediation process has also been gaining prominence. Sustainable remediation seeks to consider the environmental, economic and social impacts of remediation. Thus, this article aims to: (i) identify and describe nZVI production methods and (ii) evaluate their environmental aspects. Thus, this research was carried out in two stages. The first consisted of systematic bibliographical research to identify and describe nZVI production methods. In the second stage, an environmental analysis of the methods was performed considering the methodology of life cycle inventory assessment. Based on the inventory analysis, a classification of environmental aspects was performed, which included criteria, icons and a color scale. Nine nZVI production methods were identified, which comprised different technologies and processes. All methods had negative environmental aspects, such as high energy consumption, waste, wastewater generation and atmospheric emissions. In the classification of methods with regard to environmental aspects, the milling method had the best score, and the ultrasonic wave method the worst. Overall, this study contributes significantly to the detailed knowledge of nZVI synthesis methods in relation to production processes and their environmental aspects.

Two-dimensional IrN2 monolayer: An efficient bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions

The development of bifunctional electrocatalysts with good stability and high efficiency for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for renewable energy conversion and storage. Herein, by means of swarm-intelligence structure search and density functional theory (DFT) computations, we proposed a novel kind of two-dimensional (2D) monolayer with hypercoordinate structure as electrocatalysts for ORR/OER, namely, transition dinitride (TMN₂, TM = V, Co, Rh, Pd, W, Re, and Ir) monolayer. Our result revealed that these TMN₂ monolayers have excellent thermal, dynamic and chemical stability, as well as inherent metallic nature for their practical applications in electrocatalysis. More interestingly, among all 2D TMN₂ materials, the IrN₂ monolayer was suggested to perform as an ideal bifunctional electrocatalyst for ORR/OER with a low overpotential of 0.47 and 0.27 V, respectively, which is comparable to Pt and Ir- or Ru-based oxides. Furthermore, by examining the d-band centers of the active sites in different TMN₂ monolayers, we well rationalized the superior catalytic activity of IrN₂ monolayer for ORR/OER. Our findings not only further enrich 2D nanomaterials with hypercoordinate structure, but also open a new door to develop bifunctional oxygen electrocatalysts with high efficiency.

Covalent Bisfunctionalization of Two-Dimensional Molybdenum Disulfide

Covalent functionalization of two‐dimensional molybdenum disulfide (2D MoS₂) holds great promise in developing robust organic‐MoS₂ hybrid structures. Herein, for the first time, we demonstrate an approach to building up a bisfunctionalized MoS₂ hybrid structure through successively reacting activated MoS₂ with alkyl iodide and aryl diazonium salts. This approach can be utilized to modify both colloidal and substrate supported MoS₂ nanosheets. We have discovered that compared to the adducts formed through the reactions of MoS₂ with diazonium salts, those formed through the reactions of MoS₂ with alkyl iodides display higher reactivity towards further reactions with electrophiles. We are convinced that our systematic study on the formation and reactivity of covalently functionalized MoS₂ hybrids will provide some practical guidance on multi‐angle tailoring of the properties of 2D MoS₂ for various potential applications.

Large-scale visualization of the dispersion of liquid-exfoliated two-dimensional nanosheets

An ultrafast, non-invasive and large-scale visualization method has been developed to evaluate the dispersion of two-dimensional nanosheets in aqueous solution with a fluorescence microscope by the formation of excimers from the improvement of cation-π interactions.

Synaptic transistors and neuromorphic systems based on carbon nano-materials

Carbon-based materials possessing a nanometer size and unique electrical properties perfectly address the two critical issues of transistors, the low power consumption and scalability, and are considered as a promising material in next-generation synaptic devices. In this review, carbon-based synaptic transistors were systematically summarized. In the carbon nanotube section, the synthesis of carbon nanotubes, purification of carbon nanotubes, the effect of architecture on the device performance and related carbon nanotube-based devices for neuromorphic computing were discussed. In the graphene section, the synthesis of graphene and its derivative, as well as graphene-based devices for neuromorphic computing, was systematically studied. Finally, the current challenges for carbon-based synaptic transistors were discussed.

The Adatom Concentration Profile: A Paradigm for Understanding Two-Dimensional MoS2 Morphological Evolution in Chemical Vapor Deposition Growth

The two-dimensional (2D) transition metal dichalcogenide (TMD) MoS₂ possesses many intriguing electronic and optical properties. Potential technological applications have focused much attention on tuning MoS₂ properties through control of its morphologies during growth. In this paper, we present a unified spatial-temporal model for the growth of MoS₂ crystals with a full spectrum of shapes from triangles, concave triangles, three-point stars, to dendrites through the concept of the adatom concentration profile (ACP). We perform a series of chemical vapor deposition (CVD) experiments controlling adatom concentration on the substrate and growth temperature and present a method for experimentally measuring the ACP in the vicinity of growing islands. We apply a phase-field model of growth that explicitly considers similar variables (adatom concentration, adatom diffusion, and noise effects) and cross-validate the simulations and experiments through the ACP and island morphologies as a function of physically controllable variables. Our calculations reproduce the experimental observations with high fidelity. The ACP is an alternative paradigm to conceptualize the growth of crystals through time, which is expected to be instrumental in guiding the rational shape engineering of MoS₂ crystals.

Ultrathin chalcogenide nanosheets for photoacoustic imaging-guided synergistic photothermal/gas therapy

Previous preclinical and clinical studies have shown that using only a single therapy makes it difficult to completely eradicate tumors and restrain cancer metastasis. To overcome this challenge, multi-modal synergistic treatments have attracted considerable attention. Herein, an ultrathin Cu-loaded CoCuFe-selenide (CCFS) was prepared by a facile topotactic transformation from CoCuFe layered double hydroxide (LDH) nanosheets (NSs), followed by surface modification with polyvinyl pyrrolidone (PVP) and l-arginine (L-Arg). The resultant CCFS-PVP-L-Arg (CPA) system shows excellent synergetic photothermal and gas therapy (PTT/GT). The CCFS NSs have strong LSPR absorbance characteristic, with enhanced light absorption in the near-infrared (NIR) region. This endows the CPA nanocomposite with an outstanding photothermal conversion efficiency of 72.0% (pH 7.4) and 81.0% (pH 5.4), among the highest reported for 2D chalcogenide nanomaterials. In addition, NO release from CPA is triggered by decomposition of L-Arg in the H₂O₂-rich and acidic tumor microenvironment, permitting localized NO gas therapy in the tumor site. In vitro experiments revealed 91.8% apoptosis of HepG2 cells, and in vivo studies showed complete tumor elimination upon treatment with the CPA nanocomposite under NIR irradiation. To the best of our knowledge, this is the first report of combined defect-induced high-efficiency PTT with H₂O₂ and pH targeted GT.

Synthesis of the Platinum Nanoribbons Regulated by Fluorine and Applications in Electrocatalysis

Controlling the morphology of highly homogeneous nanoribbons is one of the main goals for synthesizing catalysts with excellent activity and durability. In this Communication, platinum (Pt) nanoribbons were synthesized by a one-pot method. We used ammonium fluoride (NH₄F) as the regulator, under 8 atm of hydrogen (H₂), to synthesize zigzag-shaped two-dimensional Pt nanoribbons. Benefiting from their unique morphology, the Pt nanoribbons display superior electrocatalytic activity and stability.

Platinum-Based Electrocatalysts for Direct Alcohol Fuel Cells: Enhanced Performances toward Alcohol Oxidation Reactions

In the past few decades, Pt-based electrocatalysts have attracted great interests due to their high catalytic performances toward the direct alcohol fuel cell (DAFC). However, the high cost, poor stability, and the scarcity of Pt have markedly hindered their large-scale utilization in commerce. Therefore, enhancing the activity and durability of Pt-based electrocatalysts, reducing the Pt amount and thus the cost of DAFC have become the keys for their practical applications. In this minireview, we summarized some basic concepts to evaluate the catalytic performances in electrocatalytic alcohol oxidation reaction (AOR) including electrochemical active surface area, activity and stability, the effective approaches for boosting the catalytic AOR performance involving size decrease, structure and morphology modulation, composition effect, catalyst supports, and assistance under other external energies. Furthermore, we also presented the remaining challenges of the Pt-based electrocatalysts to achieve the fabrication of a real DAFC.

Designing of Nanomaterials-Based Enzymatic Biosensors: Synthesis, Properties, and Applications

Among the many biological entities employed in the development of biosensors, enzymes have attracted the most attention. Nanotechnology has been fostering excellent prospects in the development of enzymatic biosensors, since enzyme immobilization onto conductive nanostructures can improve characteristics that are crucial in biosensor transduction, such as surface-to-volume ratio, signal response, selectivity, sensitivity, conductivity, and biocatalytic activity, among others. These and other advantages of nanomaterial-based enzymatic biosensors are discussed in this work via the compilation of several reports on their applications in different industrial segments. To provide detailed insights into the state of the art of this technology, all the relevant concepts around the topic are discussed, including the properties of enzymes, the mechanisms involved in their immobilization, and the application of different enzyme-derived biosensors and nanomaterials. Finally, there is a discussion around the pressing challenges in this technology, which will be useful for guiding the development of future research in the area.

Chemical conversion synthesis of magnetic Fe1-xCox alloy nanosheets with controlled composition

Chemical conversion provides a versatile platform for the synthesis of advanced nanomaterials with targeted phase, composition, and architecture. Here, we report a trioctylphosphine (TOP)-driven chemical conversion route to transform lamellar Fe_1-xCo_xS_1.2-DETA (x = 0.1, 0.3, 0.5, 0.7, DETA = diethylenetriamine) inorganic-organic hybrid solid solutions into two-dimensional (2D) single-crystal Fe_1-xCo_x alloy with controllable composition and dimensionality. Synergetic transformation coupled with DETA removal and sulfur extraction of lamellar Fe_0.9Co_0.1S_1.2-DETA hybrids was examined in detail. The highest magnetization of 175 emu g^-1 was recorded for the prepared Fe_0.7Co_0.3. Our results not only provide a new lamellar inorganic-organic hybrid solid solution but also extend the chemical conversion strategy to the synthesis of previously unavailable magnetic alloy nanosheets.

Hydrogel-assisted delivery of lipophilic molecules into aqueous medium for transdermal medication based on environment-specific, regioselective adsorption of graphene oxides

Graphene oxide (GO)-laden agarose composite hydrogels (GOACHs) were utilized to deliver lipophilic molecules from organic to aqueous media without alteration of the lipophilic nature of the molecules and the hydrophilic nature of the GOACHs. After the agarose host networks of the GOACHs were impregnated with the non-polar organic solution of lipophilic molecules via stepwise solvent exchange, their GO guests wielded the edge polar groups to effectively adsorb the lipophilic molecules via hydrogen bonding. After being transferred to aqueous media, the GOACHs were able to not only release the loaded lipophilic molecules but also to adsorb the released lipophilic molecules on the GO non-polar carbon lattice planes via hydrophobic interactions, thus resulting in deliberately balanced release of lipophilic molecules in aqueous media. Based on this environment-specific, regioselective adsorption of their GO guests, the GOACHs were harnessed as carriers for sustained delivery of ibuprofen across rat skin, underpinning their applicability in transdermal medication.

2D CoOOH nanosheets as oxidase mimic for the colorimetric assay of sulfite in food

Here, we report a rapid, sensitive and selective colorimetric assay for sulfite (SO32-) based on the intrinsic oxidase-like activity of 2D cobalt oxyhydroxide nanosheets (CoOOH NSs). The 2D CoOOH nanozyme could directly oxidize 3,3',5,5'-tetramethylbenzidine (TMB) into blue products (TMBox) in an aerobic solution without H2O2. Interestingly, the presence of SO32- could effectively inhibit the CoOOH NS-O2-TMB reaction system and thus caused changes in color and absorbance, which facilitated a colorimetric sensor for sulfite. After optimizing detection conditions, a facile and robust approach was developed for SO32- detection in food.

Recent Trends in Noble Metal Nanoparticles for Colorimetric Chemical Sensing and Micro-Electronic Packaging Applications

Noble metal NPs are highly attractive candidates because of their unique combination of physical, chemical, mechanical, and structural properties. A lot of developments in this area are still fascinating the materials research community, and are broadly categorized in various sectors such as chemical sensors, biosensors, Förster resonance energy transfer (FRET), and microelectronic applications. The related function and properties of the noble metals in these areas can be further tailored by tuning their chemical, optical, and electronic properties that are influenced by their size, shape, and distribution. The most widely used Au and Ag NPs in dispersed phase below 100 nm exhibit strong color change in the visible range which alters upon aggregation of the NPs. The chemical sensing of the analyte is influenced by these NPs aggregates. In this article, we have summarized the uniqueness of noble metal NPs, their synthesis methods, nucleation and growth process, and their important applications in chemical sensing, microelectronic packaging, and Förster resonance energy transfer.

Photoacoustic Imaging and Photothermal Therapy of Semiconducting Polymer Nanoparticles: Signal Amplification and Second Near-Infrared Construction

Photoacoustic (PA) imaging and photothermal therapy (PTT) have attracted extensive attention in disease diagnosis and treatment. Although many exogenous contrast agents have been developed for PA imaging and PTT, the design guidelines to amplify their imaging and therapy performances remain challenging and are highly demanded. Semiconducting polymer nanoparticles (SPNs) composed of polymers with π-electron delocalized backbones can be designed to amplify their PA imaging and PTT performance, because of their clear structure-property relation and versatility in modifying their molecular structures to tune their photophysical properties. This review summarizes the recent advances in the photoacoustic imaging and photothermal therapy applications of semiconducting polymer nanoparticles with a focus on signal amplification and second near-infrared (NIR-II, 1000-1700 nm) construction. The strategies such as structure-property screening, fluorescence quenching, accelerated heat dissipation, and size-dependent heat dissipation are first discussed to amplify the PA brightness of SPNs for in vivo PA. The molecular approaches to shifting the absorption of SPNs for NIR-II PA imaging and PTT are then introduced so as to improve the tissue penetration depth for diagnosis and therapy. At last, current challenges and perspectives of SPNs in the field of imaging and therapy are discussed.

Recent Progress of Ultrathin 2D Pd-Based Nanomaterials for Fuel Cell Electrocatalysis

Pd- and Pd-based catalysts have emerged as potential alternatives to Pt- and Pt-based catalysts for numerous electrocatalytic reactions, particularly fuel cell-related reactions, including the anodic fuel oxidation reaction (FOR) and cathodic oxygen reduction reaction (ORR). The creation of Pd- and Pd-based architectures with large surface areas, numerous low-coordinated atoms, and high density of defects and edges is the most promising strategy for improving the electrocatalytic performance of fuel cells. Recently, 2D Pd-based nanomaterials with single or few atom thickness have attracted increasing interest as potential candidates for both the ORR and FOR, owing to their remarkable advantages, including high intrinsic activity, high electron mobility, and straightforward surface functionalization. In this review, the recent advances in 2D Pd-based nanomaterials for the FOR and ORR are summarized. A fundamental understanding of the FOR and ORR is elaborated. Subsequently, the advantages and latest advances in 2D Pd-based nanomaterials for the FOR and ORR are scientifically and systematically summarized. A systematic discussion of the synthesis methods is also included which should guide researchers toward more efficient 2D Pd-based electrocatalysts. Lastly, the future outlook and trends in the development of 2D Pd-based nanomaterials toward fuel cell development are also presented.