Synthesis of highly crystalline and monodisperse maghemite nanocrystallites without a size-selection process

Involvement of two uptake mechanisms of gold and iron oxide nanoparticles in a co-exposure scenario using mouse macrophages

Little is known about the simultaneous uptake of different engineered nanoparticle types, as it can be expected in our daily life. In order to test such co-exposure effects, murine macrophages (J774A.1 cell line) were incubated with gold (AuNPs) and iron oxide nanoparticles (FeO _x NPs) either alone or combined. Environmental scanning electron microscopy revealed that single NPs of both types bound within minutes on the cell surface but with a distinctive difference between FeO _x NPs and AuNPs. Uptake analysis studies based on laser scanning microscopy, transmission electron microscopy, and inductively coupled plasma optical emission spectrometry revealed intracellular appearance of both NP types in all exposure scenarios and a time-dependent increase. This increase was higher for both AuNPs and FeO _x NPs during co-exposure. Cells treated with endocytotic inhibitors recovered after co-exposure, which additionally hinted that two uptake mechanisms are involved. Cross-talk between uptake pathways is relevant for toxicological studies: Co-exposure acts as an uptake accelerant. If the goal is to maximize the cellular uptake, e.g., for the delivery of pharmaceutical agents, this can be beneficial. However, co-exposure should also be taken into account in the case of risk assessment of occupational settings. The demonstration of co-exposure-invoked pathway interactions reveals that synergetic nanoparticle effects, either positive or negative, must be considered for nanotechnology and nanomedicine in particular to develop to its full potential.

Quantitative Analysis of Different Formation Modes of Platinum Nanocrystals Controlled by Ligand Chemistry

Well-defined metal nanocrystals play important roles in various fields, such as catalysis, medicine, and nanotechnology. They are often synthesized through kinetically controlled process in colloidal systems that contain metal precursors and surfactant molecules. The chemical functionality of surfactants as coordinating ligands to metal ions however remains a largely unsolved problem in this process. Understanding the metal-ligand complexation and its effect on formation kinetics at the molecular level is challenging but essential to the synthesis design of colloidal nanocrystals. Herein we report that spontaneous ligand replacement and anion exchange control the form of coordinated Pt-ligand intermediates in the system of platinum acetylacetonate [Pt(acac)₂], primary aliphatic amine, and carboxylic acid ligands. The formed intermediates govern the formation mode of Pt nanocrystals, leading to either a pseudo two-step or a one-step mechanism by switching on or off an autocatalytic surface growth. This finding shows the importance of metal-ligand complexation at the prenucleation stage and represents a critical step forward for the designed synthesis of nanocrystal-based materials.

Multilayered Magnetic Nanobeads for the Delivery of Peptides Molecules Triggered by Intracellular Proteases

In this work, the versatility of layer-by-layer technology was combined with the magnetic response of iron oxide nanobeads to prepare magnetic mesostructures with a degradable multilayer shell into which a dye quenched ovalbumin conjugate (DQ-OVA) was loaded. The system was specifically designed to prove the protease sensitivity of the hybrid mesoscale system and the easy detection of the ovalbumin released. The uptake of the nanostructures in the breast cancer cells was followed by the effective release of DQ-OVA upon activation via the intracellular proteases degradation of the polymer shells. Monitoring the fluorescence rising due to DQ-OVA digestion and the cellular dye distribution, together with the electron microscopy studying, enabled us to track the shell degradation and the endosomal uptake pathway that resulted in the release of the digested fragments of DQ ovalbumin in the cytosol.

Design of Optimally Stable Molecular Coatings for Fe-Based Nanoparticles in Aqueous Environments

Magnetic nanoparticles are widely used in biomedical and oil-well applications in aqueous, often harsh environments. The pursuit for high-saturation magnetization together with high stability of the molecular coating that prevents agglomeration and oxidation remains an active research area. Here, we report a detailed analysis of the criteria for the stability of molecular coatings in aqueous environments along with extensive first-principles calculations for magnetite, which has been widely used, and cementite, a promising emerging candidate. A key result is that the simple binding energies of molecules cannot be used as a definitive indicator of relative stability in a liquid environment. Instead, we find that H⁺ ions and water molecules facilitate the desorption of molecules from the surface. We further find that, because of differences in the geometry of crystal structures, molecules generally form stronger bonds on cementite surfaces than they do on magnetite surfaces. The net result is that molecular coatings of cementite nanoparticles are more stable. This feature, together with the better magnetic properties, makes cementite nanoparticles a promising candidate for biomedical and oil-well applications.

Preparation of Magnetic Nanoparticles via a Chemically Induced Transition: Role of Treating Solution's Temperature

Using FeOOH/Mg(OH)₂ as precursor and FeCl₂ as the treating solution, we prepared γ-Fe₂O₃ based nanoparticles. The FeCl₂ treating solution catalyzes the chemical reactions, dismutation and oxygenation, leading to the formation of products FeCl₃ and Fe₂O₃, respectively. The treating solution (FeCl₂) accelerates dehydration of the FeOOH compound in the precursor and transforms it into the initial seed crystallite γ-Fe₂O₃. Fe₂O₃ grows epitaxially on the initial seed crystallite γ-Fe₂O₃. The epitaxial layer has a magnetically silent surface, which does not have any magnetization contribution toward the breaking of crystal symmetry. FeCl₃ would be absorbed to form the FeCl₃·6H₂O surface layer outside the particles to form γ-Fe₂O₃/FeCl₃·6H₂O nanoparticles. When the treating solution's temperature is below 70 °C, the dehydration reaction of FeOOH is incomplete and the as-prepared samples are a mixture of both FeOOH and γ-Fe₂O₃/FeCl₃·6H₂O nanoparticles. As the treating solution's temperature increases from 70 to 90 °C, the contents of both FeCl₃·6H₂O and the epitaxial Fe₂O₃ increased in totality.

Optimization of Magneto-thermally Controlled Release Kinetics by Tuning of Magnetoliposome Composition and Structure

Stealth (PEGylated) liposomes have taken a central role in drug formulation and delivery combining efficient transport with low nonspecific interactions. Controlling rapid release at a certain location and time remains a challenge dependent on environmental factors. We demonstrate a highly efficient and scalable way to produce liposomes of any lipid composition containing homogeneously dispersed monodisperse superparamagnetic iron oxide nanoparticles in the membrane interior. We investigate the effect of lipid composition, particle concentration and magnetic field actuation on colloidal stability, magneto-thermally actuated release and passive release rates. We show that the rate and amount of encapsulated hydrophilic compound released by actuation using alternating magnetic fields can be precisely controlled from stealth liposomes with high membrane melting temperature. Extraordinarily low passive release and temperature sensitivity at body temperature makes this a promising encapsulation and external-trigger-on-demand release system. The introduced feature can be used as an add-on to existing stealth liposome drug delivery technology.

Tuning the coercivity and exchange bias by controlling the interface coupling in bimagnetic core/shell nanoparticles

In order to explore an alternative strategy to design exchange-biased magnetic nanostructures, bimagnetic core/shell nanoparticles have been fabricated by a thermal decomposition method and systematically studied as a function of the interface exchange coupling. The nanoparticles are constituted by a ∼3 nm antiferromagnetic (AFM) CoO core encapsulated in a ∼4 nm-thick Co_1-xZn_xFe₂O₄ (x = 0-1) ferrimagnetic (FiM) shell. The system presents an enhancement of the coercivity (H_C) as compared to its FiM single-phase counterpart and exchange bias fields (H_EB). While H_C decreases monotonically with the Zn concentration from ∼21.5 kOe for x = 0, to ∼7.1 kOe for x = 1, H_EB exhibits a non-monotonous behavior being maximum, H_EB ∼ 1.4 kOe, for intermediate concentrations. We found that the relationship between the AFM anisotropy energy and the exchange coupling energy can be tuned by replacing Co²⁺ with Zn²⁺ ions in the shell. As a consequence, the magnetization reversal mechanism of the system is changed from an AFM/FiM rigid-coupling regime to an exchange-biased regime, providing a new approach to tune the magnetic properties and to design novel hybrid nanostructures.

Host-guest driven ligand replacement on monodisperse inorganic nanoparticles

We demonstrate that crown ether-assisted ligand replacement on Fe3O4 NPs using halide salts leads to quantitative stripping of an existing stabilizer shell with unprecedented (complete) efficiency; this allows subsequent re-grafting of functional ligands at maximal surface density. The mechanism of the anion-driven ligand replacement is elucidated by varying the halide salt and the versatility by varying the re-grafted ligand.

Standardizing Size- and Shape-Controlled Synthesis of Monodisperse Magnetite (Fe3O4) Nanocrystals by Identifying and Exploiting Effects of Organic Impurities

Magnetite (Fe₃O₄) nanocrystals (MNCs) are among the most-studied magnetic nanomaterials, and many reports of solution-phase synthesis of monodisperse MNCs have been published. However, lack of reproducibility of MNC synthesis is a persistent problem, and the keys to producing monodisperse MNCs remain elusive. Here, we define and explore synthesis parameters in this system thoroughly to reveal their effects on the product MNCs. We demonstrate the essential role of benzaldehyde and benzyl benzoate produced by oxidation of benzyl ether, the solvent typically used for MNC synthesis, in producing monodisperse MNCs. This insight allowed us to develop stable formulas for producing monodisperse MNCs and propose a model to rationalize MNC size and shape evolution. Solvent polarity controls the MNC size, while short ligands shift the morphology from octahedral to cubic. We demonstrate preparation of specific assemblies with these MNCs. This standardized and reproducible synthesis of MNCs of well-controlled size, shape, and magnetic properties demonstrates a rational approach to stabilizing and expanding existing protocols for nanocrystal syntheses and may drive practical advances including enhanced MRI contrast, higher catalytic selectivity, and more accurate magnetic targeting.

Solution-phase synthesis of transition metal oxide nanocrystals: Morphologies, formulae, and mechanisms

In this review, we provide a broad overview of solution-phase synthesis of transition metal oxide nanocrystals (NCs), including a substantial catalog of published methods, and a unifying classification and discussion. Prevalent subcategories of solution-phase synthesis are delineated and general features are summarized. The diverse morphologies achievable by solution-phase synthesis are defined and exemplified. This is followed by sequential consideration of the solution-phase synthesis of first-row transition metal oxides. The common oxides of Ti, V, Mn, Fe, Co, Ni, Cu, and Zn are introduced; major crystal lattices are presented and illustrated; representative examples are explained; and numerous synthesis formulae are tabulated. Following this presentation of experimental studies, we present an introduction to theories of NC nucleation and growth. Various models of NC nucleation and growth are addressed, and important concepts determining the growth and structure of colloidal NCs are explained. Overall, this review provides an entry into systematic understanding of solution-phase synthesis of nanocrystals, with a reasonably comprehensive survey of results for the important category of transition metal oxide NCs.

Tumor Microenvironment-Triggered Aggregation of Antiphagocytosis 99m Tc-Labeled Fe3 O4 Nanoprobes for Enhanced Tumor Imaging In Vivo

A tumor microenvironment responsive nanoprobe is developed for enhanced tumor imaging through in situ crosslinking of the Fe₃ O₄ nanoparticles modified with a responsive peptide sequence in which a tumor-specific Arg-Gly-Asp peptide for tumor targeting and a self-peptide as a "mark of self" are linked through a disulfide bond. Positioning the self-peptide at the outmost layer is aimed at delaying the clearance of the nanoparticles from the bloodstream. After the self-peptide is cleaved by glutathione within tumor microenvironment, the exposed thiol groups react with the remaining maleimide moieties from adjacent particles to crosslink the particles in situ. Both in vitro and in vivo experiments demonstrate that the aggregation substantially improves the magnetic resonance imaging (MRI) contrast enhancement performance of Fe₃ O₄ particles. By labeling the responsive particle probe with ^99m Tc, single-photon emission computed tomography is enabled not only for verifying the enhanced imaging capacity of the crosslinked Fe₃ O₄ particles, but also for achieving sensitive dual modality imaging of tumors in vivo. The novelty of the current probe lies in the combination of tumor microenvironment-triggered aggregation of Fe₃ O₄ nanoparticles for boosting the T₂ MRI effect, with antiphagocytosis surface coating, active targeting, and dual-modality imaging, which is never reported before.

Monodisperse Iron Oxide Nanoparticles by Thermal Decomposition: Elucidating Particle Formation by Second-Resolved in Situ Small-Angle X-ray Scattering

The synthesis of iron oxide nanoparticles (NPs) by thermal decomposition of iron precursors using oleic acid as surfactant has evolved to a state-of-the-art method to produce monodisperse, spherical NPs. The principles behind such monodisperse syntheses are well-known: the key is a separation between burst nucleation and growth phase, whereas the size of the population is set by the precursor-to-surfactant ratio. Here we follow the thermal decomposition of iron pentacarbonyl in the presence of oleic acid via in situ X-ray scattering. This method allows reaction kinetics and precursor states to be followed with high time resolution and statistical significance. Our investigation demonstrates that the final particle size is directly related to a phase of inorganic cluster formation that takes place between precursor decomposition and particle nucleation. The size and concentration of clusters were shown to be dependent on precursor-to-surfactant ratio and heating rate, which in turn led to differences in the onset of nucleation and concentration of nuclei after the burst nucleation phase. This first direct observation of prenucleation formation of inorganic and micellar structures in iron oxide nanoparticle synthesis by thermal decomposition likely has implications for synthesis of other NPs by similar routes.

Effect of ligand on particle size and morphology of nanostructures synthesized by thermal decomposition of coordination compounds

Thermal decomposition of organometallic and various coordination compounds are known as general method to synthesize a wide range of nanostructures including metals, metal oxides and sulfides. Herein, in order to coordinate metals and prepare suitable precursor - due to the efficient role of precursor on the particle size and morphology of products - appropriate ligands will be introduced.

Economically attractive route for the preparation of high quality magnetic nanoparticles by the thermal decomposition of iron(III) acetylacetonate

The thermal decomposition (TD) methods are among the most successful in obtaining magnetic nanoparticles with a high degree of control of size and narrow particle size distribution. Here we investigated the TD of iron(III) acetylacetonate in the presence of oleic acid, oleylamine, and a series of alcohols in order to disclose their role and also investigate economically attractive alternatives for the synthesis of iron oxide nanoparticles without compromising their size and shape control. We have found that some affordable and reasonably less priced alcohols, such as 1,2-octanediol and cyclohexanol, may replace the commonly used and expensive 1,2-hexadecanediol, providing an economically attractive route for the synthesis of high quality magnetic nanoparticles. The relative cost for the preparation of Fe₃O₄ NPs is reduced to only 21% and 9% of the original cost when using 1,2-octanediol and cyclohexanol, respectively.

Controlled aggregation and cell uptake of thermoresponsive polyoxazoline-grafted superparamagnetic iron oxide nanoparticles

Hydrophilic polymer-coated iron oxide nanoparticles are potential materials for a plethora of applications in the biotechnological field. Typical such polymers, e.g. dextran or poly(ethylene glycol), lack the ability to tailor the biological response to an environmental trigger, while common responsive polymers such as poly(N-isopropylacrylamide) or poly(acrylic acid) are not suitable for biomedical applications. We present the synthesis and characterization of superparamagnetic iron oxide nanoparticles with thermoresponsive polyoxazoline brushes grafted at unprecedented density using nitrodopamine anchor chemistry. Reversible aggregation/deaggregation is observed in water and biological medium, confirming control over the colloidal stability. Thermal switching of the solubility could only be achieved by global heating of the sample, while local magnetothermal heating did not produce a sufficiently strong temperature gradient through the brush. Varying the polymer composition allows for tuning of the lower critical solution temperature (LCST) as well as the average nanoparticle cluster size obtained upon heating. The LCST of polyoxazolines and the thermal colloidal stability are shown to be greatly affected by ion concentration, by polymer grafting density and also by the presence of serum protein; this shows that transition temperatures of free polymers in water can be very misleading for the design of polymer-coated nanomaterials for biomedical applications. Finally, the thermoresponsive SPION are shown to be non-cytotoxic and with a low cell uptake scaling with the hydration of the polymer brush, which is tuned by the polymer composition. Thus, we demonstrate that pozylated nanoparticles provide the advantages of PEG- and PNIPAM-grafted nanoparticles, but provide a tunable and more easily functionalizable platform for further development.

Exceedingly small iron oxide nanoparticles as positive MRI contrast agents

Medical imaging is routine in the diagnosis and staging of a wide range of medical conditions. In particular, magnetic resonance imaging (MRI) is critical for visualizing soft tissue and organs, with over 60 million MRI procedures performed each year worldwide. About one-third of these procedures are contrast-enhanced MRI, and gadolinium-based contrast agents (GBCAs) are the mainstream MRI contrast agents used in the clinic. GBCAs have shown efficacy and are safe to use with most patients; however, some GBCAs have a small risk of adverse effects, including nephrogenic systemic fibrosis (NSF), the untreatable condition recently linked to gadolinium (Gd) exposure during MRI with contrast. In addition, Gd deposition in the human brain has been reported following contrast, and this is now under investigation by the US Food and Drug Administration (FDA). To address a perceived need for a Gd-free contrast agent with pharmacokinetic and imaging properties comparable to GBCAs, we have designed and developed zwitterion-coated exceedingly small superparamagnetic iron oxide nanoparticles (ZES-SPIONs) consisting of ∼3-nm inorganic cores and ∼1-nm ultrathin hydrophilic shell. These ZES-SPIONs are free of Gd and show a high T₁ contrast power. We demonstrate the potential of ZES-SPIONs in preclinical MRI and magnetic resonance angiography.

Individually Stabilized, Superparamagnetic Nanoparticles with Controlled Shell and Size Leading to Exceptional Stealth Properties and High Relaxivities

Superparamagnetic iron oxide nanoparticles (SPION) have received immense interest for biomedical applications, with the first clinical application as negative contrast agent in magnetic resonance imaging (MRI). However, the first generation MRI contrast agents with dextran-enwrapped, polydisperse iron oxide nanoparticle clusters are limited to imaging of the liver and spleen; this is related to their poor colloidal stability in biological media and inability to evade clearance by the reticuloendothelial system. We investigate the qualitatively different performance of a new generation of individually PEG-grafted core-shell SPION in terms of relaxivity and cell uptake and compare them to benchmark iron oxide contrast agents. These PEG-grafted SPION uniquely enable relaxivity measurements in aqueous suspension without aggregation even at 9.4 T magnetic fields due to their extraordinary colloidal stability. This allows for determination of the size-dependent scaling of relaxivity, which is shown to follow a d2 dependence for identical core-shell structures. The here introduced core-shell SPION with ∼15 nm core diameter yield a higher R2 relaxivity than previous clinically used contrast agents as well as previous generations of individually stabilized SPION. The colloidal stability extends to control over evasion of macrophage clearance and stimulated uptake by SPION functionalized with protein ligands, which is a key requirement for targeted MRI.

An efficient strategy to synthesize a multifunctional ferroferric oxide core@dye/SiO2@Au shell nanocomposite and its targeted tumor theranostics

Regular spheric magnetic ferroferric oxide nanoclusters have been developed and used for the targeted photothermal therapy of colorectal cancer cells after conjugation with SW620-specific phage fusion proteins.

Synthesis and application of monodisperse hydrophobic magnetite nanoparticles as an oil spill collector using an ionic liquid

In this work, a new facile green method was proposed to prepare monodisperse magnetic nanoparticles at room temperature with controlled shape and size.

Optimized PAMAM coated magnetic nanoparticles for simultaneous hyperthermic treatment and contrast enhanced MRI diagnosis

We report the synthesis and characterization of multi-functional monodisperse superparamagnetic Magnetic NanoParticles, MNPs, able to act as contrast agents for magnetic resonance and Magnetic Fluid Hyperthermia (MFH) mediators.

The Influence of Temperature on the Formation of Cubic Structured CdO Nanoparticles and Their Thin Films from Bis(2-hydroxy-1-naphthaldehydato)cadmium(II) Complex via Thermal Decomposition Technique

Recently, researchers have developed a great interest in the synthesis of metal oxide nanoparticles due to their potential applications in various fields of science and industry, especially in catalysis, due to their high activity. Bis(2-hydroxy-1-naphthaldehydato)cadmium(II) complexes were prepared and used as precursors for the synthesis of cadmium oxide nanoparticles via thermal decomposition method using HDA as a stabilizing agent. The prepared complexes were also used as single source precursors to prepare CdO thin films onto the glass substrates by spin coating and were annealed at 250, 300, and 350°C, respectively. The precursors were characterized by Fourier transform infrared (FTIR) spectroscopy, elemental analysis, nuclear magnetic resonance (NMR), and thermogravimetric analysis (TGA). The synthesized CdO nanoparticles and CdO thin films were characterized by ultraviolet-visible (UV-vis) spectroscopy, photoluminescence (PL), X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM).

Asymmetrically substituted triazenes as poor electron donor ligands in the precursor chemistry of iron(ii) for iron-based metallic and intermetallic nanocrystals

First as precursors: Heteroleptic Fe^II complexes derived from new asymmetric triazene ligands t-BuNN-NHR (R = Et, i-Pr, n-Bu) show interesting molecular and precursor chemistry.

Controlling structural and magnetic properties of IONPs by aqueous synthesis for improved hyperthermia

Introducing a hydrothermal step after coprecipitation leads to iron oxide nanoparticles with higher vacancy ordering, saturation magnetization and specific absorption rate.

Toxic Effects of Engineered Nanoparticles on Living Cells

Measuring toxic effects of engineered nanoparticles on living cells would require a deep understanding of themselves by the mean of their composition, physical and chemical properties and exposure concentrations. Actually, high exposure concentrations are needed to generate quantifiable effects and to perceive accumulation above background. This chapter presents an overview on the assessment about the toxic effects of engineered nanoparticles on living cells. It consists of three main sections starting with a brief introduction, the current state of engineered nanoparticles in the environment, physical and chemical properties of some important engineered nanoparticles such as “Ag, Au, ZnO, TiO2” and the target organ toxicity of the engineered nanoparticles in several biological organisms.

Hematite nanoparticle clusters with remarkably high magnetization synthesized from water-treatment waste by one-step “sharp high-temperature dehydration”

Hematite (α-Fe₂O₃) nanoparticle clusters with an exceptionally high magnetization of 51 emu g⁻¹ were synthesized for the first time. This material was prepared from water-treatment waste by a new “sharp high-temperature dehydration” process.

Superparamagnetic iron oxide nanoparticles functionalized by peptide nucleic acids

Hydrophilic SPION were decorated with PNA decamers by SH/maleimide clickreaction as potential MRI and hyperthermia agents, and PNA carriers.

Multiphase Media Antiadhesive Coatings: Hierarchical Self-Assembled Porous Materials Generated Using Breath Figure Patterns

The cleaning of interface pollutants typically consumes a large amount of energy. Therefore, the development of multiphase media antiadhesive materials is urgently required to meet the demand of energy savings and environmental protection. In this study, the antiadhesive properties toward several liquid droplets and bubbles in multiple media are demonstrated on a porous Fe₂O₃ coating, which is prepared via a facile spin-coating-assisted breath figure approach and a phase separation strategy. The prominent antiadhesive characteristic of these porous surfaces lies in their high-surface-energy hierarchical micro/nanoscale structure, which easily entraps one medium (oil or water) in the pore and repels other unmixable liquids and air bubbles. In addition, we successfully demonstrate an antifouling application of the coating, which shows excellent antiadhesive and super-antiwetting characteristics under multiple liquids. Our work extends relevant antiadhesion research from a single medium to multiple media and promises to broaden the applications of antiadhesive materials in sophisticated activities performed under complicated liquid environments, such as marine antifouling or pipeline transportation.

Recent Advances on Inorganic Nanoparticle-Based Cancer Therapeutic Agents

Inorganic nanoparticles have been widely investigated as therapeutic agents for cancer treatments in biomedical fields due to their unique physical/chemical properties, versatile synthetic strategies, easy surface functionalization and excellent biocompatibility. This review focuses on the discussion of several types of inorganic nanoparticle-based cancer therapeutic agents, including gold nanoparticles, magnetic nanoparticles, upconversion nanoparticles and mesoporous silica nanoparticles. Several cancer therapy techniques are briefly introduced at the beginning. Emphasis is placed on how these inorganic nanoparticles can provide enhanced therapeutic efficacy in cancer treatment through site-specific accumulation, targeted drug delivery and stimulated drug release, with elaborations on several examples to highlight the respective strategies adopted. Finally, a brief summary and future challenges are included.

Quantitative Activity Measurements of Brown Adipose Tissue at 7 T Magnetic Resonance Imaging After Application of Triglyceride-Rich Lipoprotein 59Fe-Superparamagnetic Iron Oxide Nanoparticle: Intravenous Versus Intraperitoneal Approach

OBJECTIVES

The aim of this study was to determine metabolic activity of brown adipose tissue (BAT) with in vivo magnetic resonance imaging (MRI) after intravenous (IV) and intraperitoneal (IP) injection of radioactively labeled superparamagnetic iron oxide nanoparticles (SPIOs) embedded into a lipoprotein layer.

MATERIALS AND METHODS

Fe-labeled SPIOs were either polymer-coated or embedded into the lipid core of triglyceride-rich lipoproteins (TRL-Fe-SPIOs). First biodistribution and blood half time analysis in thermoneutral mice after IP injection of either TRL-Fe-SPIOs or polymer-coated Fe-SPIOs (n = 3) were performed. In the next step, cold-exposed (24 hours), BAT-activated mice (n = 10), and control thermoneutral mice (n = 10) were starved for 4 hours before IP (n = 10) or IV (n = 10) injection of TRL-Fe-SPIOs. In vivo MRI was performed before and 24 hours after the application of the particles at a 7 T small animal MRI scanner using a T2*-weighted multiecho gradient echo sequence. R2* and ΔR2* were estimated in the liver, BAT, and muscle. The biodistribution of polymer-coated Fe-SPIOs and TRL-Fe-SPIOs was analyzed ex vivo using a sensitive, large-volume Hamburg whole-body radioactive counter. The amount of Fe-SPIOs in the liver, BAT, and muscle was correlated with the MRI measurements using the Pearson correlation coefficient. Tissue uptake of Fe-SPIOs was confirmed by histological and transmission electron microscopy analyses.

RESULTS

Triglyceride-rich lipoprotein Fe-SPIOs exhibited a higher blood concentration after IP injection (10.1% ± 0.91% after 24 hours) and a greater [INCREMENT]R2* in the liver (103 ± 5.0 s), while polymer-coated SPIOs did not increase substantially in the blood stream (0.19% ± 0.01% after 24 hours; P < 0.001) and the liver (57 ± 4.08 s; P < 0.001). In BAT activity studies, significantly higher uptake of TRL-Fe-SPIOs was detected in the BAT of cold-exposed mice, with [INCREMENT]R2* of 107 ± 5.5 s after IV application (control mice: [INCREMENT]R2* of 22 ± 5.8 s; P < 0.001) and 45 ± 5.5 s after IP application (control mice: [INCREMENT]R2* of 11 ± 2.9 s; P < 0.01). Fe radioactivity measurements and [INCREMENT]R2* values correlated strongly in BAT (r > 0.85; P < 0.001) and liver tissue (r > 0.85; P < 0.001). Histological and transmission electron microscopy analyses confirmed the uptake of TRL-Fe-SPIOs within the liver and BAT for both application approaches.

CONCLUSIONS

Triglyceride-rich lipoprotein-embedded SPIOs were able to escape the abdominal cavity barrier, whereas polymer-coated SPIOs did not increase substantially in the blood stream. Brown adipose tissue activity can be determined via MRI using TRL-Fe-SPIOs. The quantification of [INCREMENT]R2* using TRL-Fe-SPIOs is feasible and may serve as a noninvasive tool for the quantitative estimation of BAT activity.