Singlet exciton fission in polycrystalline thin films of a slip-stacked perylenediimide

Singlet fission in pentacene dimers

Singlet fission (SF) has the potential to supersede the traditional solar energy conversion scheme by means of boosting the photon-to-current conversion efficiencies beyond the 30% Shockley-Queisser limit. Here, we show unambiguous and compelling evidence for unprecedented intramolecular SF within regioisomeric pentacene dimers in room-temperature solutions, with observed triplet quantum yields reaching as high as 156 ± 5%. Whereas previous studies have shown that the collision of a photoexcited chromophore with a ground-state chromophore can give rise to SF, here we demonstrate that the proximity and sufficient coupling through bond or space in pentacene dimers is enough to induce intramolecular SF where two triplets are generated on one molecule.

Singlet exciton fission in thin films of tert-butyl-substituted terrylenes

Two terrylene chromophores, 2,5,10,13-tetra(tert-butyl)terrylene (1) and 2,5-di(tert-butyl)terrylene (2), were synthesized and studied to determine their singlet exciton fission (SF) efficiencies. Compound 1 crystallizes in one-dimensional stacks, whereas 2 packs in a slip-stacked, herringbone pattern of dimers motif. Strongly quenched fluorescence and rapid singlet exciton decay dynamics are observed in vapor-deposited thin films of 1 and 2. Phosphorescence measurements on thin films of 1 and 2 show that SF is only 70 meV endoergic for these chromophores. Femtosecond transient absorption experiments using low laser fluences on these films reveal rapid triplet exciton formation for both 1 (τ = 120 ± 10 ps) and 2 (τ = 320 ± 20 ps) that depends strongly on film crystallinity. The transient absorption data are consistent with formation of an excimer state prior to SF. Triplet exciton yield measurements indicate nearly quantitative SF in thin films of both chromophores in highly crystalline solvent-vapor-annealed films: 170 ± 20% for 1 and 200 ± 30% for 2. These results show that significantly different crystal morphologies of the same chromophore can both result in high-efficiency SF provided that the energetics are favorable.

Tetracene Aggregation on Polar and Nonpolar Surfaces: Implications for Singlet Fission

In molecular crystals that exhibit singlet fission, quantum yields depend strongly on intermolecular configurations that control the relevant electronic couplings. Here, we explore how noncovalent interactions between molecules and surfaces stabilize intermolecular structures with strong singlet fission couplings. Using molecular dynamics simulations, we studied the aggregation patterns of tetracene molecules on a solid surface as a function of surface polarity. Even at low surface concentrations, tetracene self-assembled into nanocrystallites where about 10-20% of the clustered molecules were part of at least one herringbone structure. The herringbone structure is the native structure of crystalline tetracene, which exhibits a high singlet fission quantum yield. Increasing the polarity of the surface reduced both the amount of clustering and the relative number of herringbone configurations, but only when the dipoles on the surface were orientationally disordered. These results have implications for the application of singlet fission in dye-sensitized solar cells.

Intermolecular Vibrational Modes Speed Up Singlet Fission in Perylenediimide Crystals

We report numerical simulations based on a non-Markovian density matrix propagation scheme of singlet fission (SF) in molecular crystals. Ab initio electronic structure calculations were used to parametrize the exciton and phonon Hamiltonian as well as the interactions between the exciton and the intramolecular and intermolecular vibrational modes. We demonstrate that the interactions of the exciton with intermolecular vibrational modes are highly sensitive to the stacking geometry of the crystal and can, in certain cases, significantly accelerate SF. This result may help in understanding the fast SF experimentally observed in a broad range of molecular crystals and offers a new direction for the engineering of efficient SF sensitizers.

Photocurrent enhanced by singlet fission in a dye-sensitized solar cell

Investigations of singlet fission have accelerated recently because of its potential utility in solar photoconversion, although only a few reports definitively identify the role of singlet fission in a complete solar cell. Evidence of the influence of singlet fission in a dye-sensitized solar cell using 1,3-diphenylisobenzofuran (DPIBF, 1) as the sensitizer is reported here. Self-assembly of the blue-absorbing 1 with co-adsorbed oxidation products on mesoporous TiO2 yields a cell with a peak internal quantum efficiency of ∼70% and a power conversion efficiency of ∼1.1%. Introducing a ZrO2 spacer layer of thickness varying from 2 to 20 Å modulates the short-circuit photocurrent such that it is initially reduced as thickness increases but 1 with 10-15 Å of added ZrO2. This rise can be explained as being due to a reduced rate of injection of electrons from the S1 state of 1 such that singlet fission, known to occur with a 30 ps time constant in polycrystalline films, has the opportunity to proceed efficiently and produce two T1 states per absorbed photon that can subsequently inject electrons into TiO2. Transient spectroscopy and kinetic simulations confirm this novel mode of dye-sensitized solar cell operation and its potential utility for enhanced solar photoconversion.

Excimer formation in a confined space: photophysics of ladderphanes with tetraarylethylene linkers

Communication between chromophores is vital for both natural and non-natural photophysical processes. Spatial confinements offer unique conditions to scrutinize such interactions. Polynorbornene- and polycyclobutene-based ladderphanes are ideal model compounds in which all tetraarylethylene (TAE) linkers are aligned coherently. The spans for each of the monomeric units in these ladderphanes are 4.5-5.5 Å. Monomers do not exhibit emission, because bond rotation in TAE can quench the excited-state energy. However, polymers emit at 493 nm (Φ=0.015) with large Stokes shift under ambient conditions and exhibit dual emission at 450 and 493 nm at 150 K. When the temperature is lowered, the emission intensity at 450 nm increases, whereas that at 493 nm decreases. At 100 K, both monomers and polymers emit only at 450 nm. This shorter-wavelength emission arises from the intrinsic emission of TAE chromophore, and the emission at 493 nm could be attributed to the excimer emission in the confined space of ladderphanes. The fast kinetics suggest diffusion-controlled formation of the excimer.

Synthesis and aggregation properties of a series of dumbbell polyhedral oligosilsesquioxane-perylene diimide triads

A series of perylenetetracarboxylic diimide compounds connected with POSS groups have been synthesized and their solid state emission properties are investigated.

Photoinduced Electron Transfer in 2,5,8,11-Tetrakis-Donor-Substituted Perylene-3,4:9,10-bis(dicarboximides)

A series of electron donor-acceptor compounds based on substitution of perylene-3,4:9,10-bis(dicarboximide) (PDI) with four electron donors at the 2,5,8,11-positions were synthesized and characterized using femtosecond transient absorption spectroscopy. The distance between the PDI and the N,N-dimethylaniline or phenothiazine donors was varied using one or two phenyl groups. Photoexcitation of PDI results in rapid charge separation followed by charge recombination with time constants ranging from tens of picoseconds to nanoseconds. The electron transfer time constants are compared with those of the corresponding molecules in which the donor is attached to the PDI through its imide nitrogen atom. The electron transfer reactions through the 2,5,8,11-positions of PDI are generally much faster than those through the imide nitrogen positions, in concert with stronger donor electronic coupling to the PDI acceptor core and in contrast to substituents at the imide positions through which the HOMO and LUMO nodal planes pass.

Slip-stacked perylenediimides as an alternative strategy for high efficiency nonfullerene acceptors in organic photovoltaics

Perylenediimide (PDI)-based acceptors offer a potential replacement for fullerenes in bulk-heterojunction (BHJ) organic photovoltaic cells (OPVs). The most promising efforts have focused on creating twisted PDI dimers to disrupt aggregation and thereby suppress excimer formation. Here, we present an alternative strategy for developing high-performance OPVs based on PDI acceptors that promote slip-stacking in the solid state, thus preventing the coupling necessary for rapid excimer formation. This packing structure is accomplished by substitution at the PDI 2,5,8,11-positions ("headland positions"). Using this design principle, three PDI acceptors, N,N-bis(n-octyl)-2,5,8,11-tetra(n-hexyl)-PDI (Hexyl-PDI), N,N-bis(n-octyl)-2,5,8,11-tetraphenethyl-PDI (Phenethyl-PDI), and N,N-bis(n-octyl)-2,5,8,11-tetraphenyl-PDI (Phenyl-PDI), were synthesized, and their molecular and electronic structures were characterized. They were then blended with the donor polymer PBTI3T, and inverted OPVs of the structure ITO/ZnO/Active Layer/MoO3/Ag were fabricated and characterized. Of these, 1:1 PBTI3T:Phenyl-PDI proved to have the best performance with Jsc = 6.56 mA/cm(2), Voc = 1.024 V, FF = 54.59%, and power conversion efficiency (PCE) = 3.67%. Devices fabricated with Phenethyl-PDI and Hexyl-PDI have significantly lower performance. The thin film morphology and the electronic and photophysical properties of the three materials are examined, and although all three materials undergo efficient charge separation, PBTI3T:Phenyl-PDI is found to have the deepest LUMO, intermediate crystallinity, and the most well-mixed domains. This minimizes geminate recombination in Phenyl-PDI OPVs and affords the highest PCE. Thus, slip-stacked PDI strategies represent a promising approach to fullerene replacements in BHJ OPVs.

Impact of Intermolecular Distance on Singlet Fission in a Series of TIPS Pentacene Compounds

Singlet fission has attracted considerable interest for its potential application in organic photovoltaics. However, the underlying microscopic mechanism is not well understood and the molecular parameters that govern SF efficiency remain unclear. We herein study the primary exciton photogeneration and evolution in the thin film of a series of pentacene derivatives (TIPS-Pn and ADPD-Pn) using femtosecond transient absorption spectroscopy. With a favorable "long-edge on" packing motif, the singlet-excited slip-stacked TIPS-Pn and ADPD-Pn molecules undergo ultrafast fission to produce triplet excitonic states with time constants of ∼0.3 ps. More importantly, the ADPD-Pn compound features a considerably higher triplet yield than TIPS-Pn (162 ± 10% vs 114 ± 15%). The enhanced electronic coupling as a result of closer interchromophore distance (3.33 Å for ADPD-Pn vs 3.40 Å for TIPS-Pn) is suggested to account for the much higher triplet yield for ADPD-Pn relative to that for TIPS-Pn, proving SF can be readily modulated by adjusting the intermolecular distance.

Energy flow dynamics within cofacial and slip-stacked perylene-3,4-dicarboximide dimer models of π-aggregates

Robust perylene-3,4-dicarboximide (PMI) π-aggregates provide important light-harvesting and electron-hole pair generation advantages in organic photovoltaics and related applications, but relatively few studies have focused on the electronic interactions between PMI chromophores. In contrast, structure-function relationships based on π-π stacking in the related perylene-3,4:9,10-bis(dicarboximides) (PDIs) have been widely investigated. The performance of both PMI and PDI derivatives in organic devices may be limited by the formation of low-energy excimer trap states in morphologies where interchromophore coupling is strong. Here, five covalently bound PMI dimers with varying degrees of electronic interaction were studied to probe the relative chromophore orientations that lead to excimer energy trap states. Femtosecond near-infrared transient absorption spectroscopy was used to observe the growth of a low-energy transition at ~1450-1520 nm characteristic of the excimer state in these covalent dimers. The excimer-state absorption appears in ~1 ps, followed by conformational relaxation over 8-17 ps. The excimer state then decays in 6.9-12.8 ns, as measured by time-resolved fluorescence spectroscopy. The excimer lifetimes reach a maximum for a slip-stacked geometry in which the two PMI molecules are displaced along their long axes by one phenyl group (~4.3 Å). Additional displacement of the PMIs by a biphenyl spacer along the long axis prevents excimer formation. Symmetry-breaking charge transfer is not observed in any of the PMI dimers, and only a small triplet yield (<5%) is observed for the cofacial PMI dimers. These data provide structural insights for minimizing excimer trap states in organic devices based on PMI derivatives.

Excimer formation in cofacial and slip-stacked perylene-3,4:9,10-bis(dicarboximide) dimers on a redox-inactive triptycene scaffold

Excitation energy transfer in perylene-3,4:9,10-bis(dicarboximide) (PDI) aggregates is of interest for light-harvesting applications of this strongly absorbing and π-π stacking chromophore. Here we report the synthesis and characterization of two PDI dimers in which the chromophores are covalently linked by a redox-inactive triptycene bridge in orientations that are cofacial (1) and slip-stacked along their N-N axes (2). Femtosecond transient absorption experiments on 1 and 2 reveal rapid exciton delocalization resulting excimer formation. Cofacial π-π stacked dimer 1 forms a low-energy excimer state absorption (λmax = 1666 nm) in τ = ∼2 ps after photoexcitation. Inserting a phenyl spacer on the bridge to generate a slip-stacked PDI-PDI geometry in 2 results in a less stable excimer state (λmax = 1430 nm), which forms in τ = ∼12 ps due to decreased electronic coupling. The near-infrared (NIR) excimer absorption of cofacial dimer 1 is ∼120 meV lower in energy than that of slip-stacked dimer 2, further highlighting electronic differences between these states.

Long-lived charge carrier generation in ordered films of a covalent perylenediimide-diketopyrrolopyrrole-perylenediimide molecule

The photophysics of a covalently linked perylenediimide-diketopyrrolopyrrole-perylenediimide acceptor-donor-acceptor molecule (PDI-DPP-PDI, 1) were investigated and found to be markedly different in solution versus in unannealed and solvent annealed films. Photoexcitation of 1 in toluene results in quantitative charge separation in τ = 3.1 ± 0.2 ps, with charge recombination in τ = 340 ± 10 ps, while in unannealed/disordered films of 1, charge separation occurs in τ < 250 fs, while charge recombination displays a multiexponential decay in ∼6 ns. The absence of long-lived, charge separation in the disordered film suggests that few free charge carriers are generated. In contrast, upon CH₂Cl₂ vapor annealing films of 1, grazing-incidence X-ray scattering shows that the molecules form a more ordered structure. Photoexcitation of the ordered films results in initial formation of a spin-correlated radical ion pair (electron-hole pair) as indicated by magnetic field effects on the formation of free charge carriers which live for ∼4 μs. This result has significant implications for the design of organic solar cells based on covalent donor-acceptor systems and shows that long-lived, charge-separated states can be achieved by controlling intramolecular charge separation dynamics in well-ordered systems.

Direct Observation of Ultrafast Excimer Formation in Covalent Perylenediimide Dimers Using Near-Infrared Transient Absorption Spectroscopy

Energy transfer in perylene-3,4:9,10-bis(dicarboximide) (PDI) aggregates is often limited by formation of a low-energy excimer state. Formation dynamics of excimer states are often characterized by line shape changes and peak shift dynamics in femtosecond visible transient absorption spectra. Femtosecond near-infrared transient absorption experiments reveal a unique low-energy transition that can be used to identify and characterize this state without overlapping excited singlet-state absorption. Three covalently bound PDI dimers with differing PDI-PDI distances were studied to probe the influence of interchromophore electronic coupling on the PDI excimer transient spectra and dynamics.

Mechanism of singlet fission in thin films of 1,3-diphenylisobenzofuran

In order to elucidate the mechanism of singlet fission in thin films of 1,3-diphenylisobenzofuran (1) we have performed ultrafast transient absorption spectroscopy as a function of sample temperature and excitation fluence on polycrystalline thin films composed of two polymorphs. Our earlier investigations revealed that films enriched in a particular polymorph of 1 displayed near 200% efficiency for triplet formation at 77 K, while films composed primarily of a second polymorph had a very low triplet quantum yield. Present data confirm the triplet yield disparities in the two polymorphs and demonstrate the distinct fates of the initially prepared singlets in films of different structure. Singlet fission is inhibited in the more stable polymorph due to rapid excimer formation and trapping. The less stable polymorph undergoes highly efficient singlet fission with a dominant time constant of 10-30 ps and without strong thermal activation. Transient absorption measurements with varying excitation fluence indicate that singlet-singlet annihilation is a primary competitor of singlet fission at higher fluence and that fission from higher-lying states can also contribute to the triplet formation process. Measurements employing different excitation energies and sample temperatures reveal the role that trapping processes play in attenuating the triplet quantum yield to produce the complex temperature dependence of the singlet fission yield. The rate constants for singlet fission itself are essentially temperature independent.