Kinetics of film formation by interfacial polycondensation

Molecular layer-by-layer assembled thin-film composite membranes for water desalination

Molecular layer-by-layer (mLbL) assembled thin-film composite membranes fabricated by alternating deposition of reactive monomers on porous supports exhibit both improved salt rejection and enhanced water flux compared to traditional reverse osmosis membranes prepared by interfacial polymerization. Additionally, the well-controlled structures achieved by mLbL deposition further lead to improved antifouling performance.

Enhanced partitioning and transport of phenolic micropollutants within polyamide composite membranes

Aromatic phenols represent an important class of endocrine-disrupting and toxic pollutants, many of which (e.g., bisphenol A and substituted phenols) are known to be insufficiently removed by reverse osmosis (RO) and nanofiltration polyamide membranes that are widely used for water purification. In this study, the mechanism of phenol transport across the polyamide layer of RO membranes is studied using model phenolic compounds hydroquinone (HQ) and its oxidized counterpart benzoquinone (BQ). The study employs filtration experiments and two electrochemical techniques, impedance spectroscopy (EIS) and chronoamperometry (CA), to evaluate the permeability of an RO membrane SWC1 to these solutes in the concentration range 0.1-10 mM. In addition, combination of the permeability data with EIS results allows separately estimating the average diffusivity and partitioning of BQ and HQ. All methods produced permeability of the order 10(-7) to 10(-6) m s(-1) that decreased with solute concentration, even though the permeability obtained from filtration was consistently lower. The decrease of permeability with concentration could be related to the nonlinear convex partitioning isotherm, in agreement with earlier measurements by FTIR. The diffusivity of HQ and BQ was estimated to be of the order 10(-15) m(2) s(-1) and partitioning coefficient of the order 10. The high affinity of phenols toward polyamide and their high uptake may change membrane characteristics at high concentration of the solute. EIS results and hydraulic permeability indeed showed that permeability to ions and water significantly decreases with increasing concentration of organic solute.

Study of albumin and fibrinogen membranes formed by interfacial crosslinking using microfluidic flow

Microfluidics enables scale reduction in sample volume with obvious benefits for reagent conservation. In contrast to conventional macro-scale flow, microfluidics also offers unprecedented control over flow dynamics. In particular, laminar flow is readily achieved, allowing for new analytical and synthetic strategies. Here, two parallel flows of buffer and xylene were used to create a stable liquid-liquid interface within linear micro-channels. These, respectively, carried protein (albumin or fibrinogen) and an acyl chloride to effect protein crosslinking. This created robust, micro-membranes at the interface that bisected the fluid channel. Membrane formation was self-limiting, with fibrinogen membranes showing greater solute permeability than albumin, based on dye transport (Ponceau S, Meldola Blue). The crosslinker isophthaloyl dichloride led to thinner, less permeable membranes than terephthaloyl chloride. Larger surface area membranes formed at a static liquid-liquid interface served as a more physically accessible model and allowed precise electrochemical determination of acetaminophen, catechol and peroxide diffusion coefficients, which confirmed the greater fibrinogen permeability. Scanning electron microscopy (SEM) of the membranes also indicated a higher population of discrete nanopores at the fibrinogen surface. A crosslinking pH had a strong effect on overall permeability. Adhesion of B50 neuronal cells was demonstrated, and it is proposed that the membranes could facilitate cell growth through bidirectional nutrient supply in a micrbioreactor format.

Simulation of thin film membranes formed by interfacial polymerization

Interfacial polymerization is widely used today for the production of ultrathin films for encapsulation, chemical separations, and desalination. Polyamide films, in particular, are employed in manufacturing of reverse osmosis and nanofiltration membranes. While these materials show excellent salt rejection, they have rather low water permeability, both properties that apparently stem from the rigid cross-linked structure. An increasing amount of experimental research on membranes of different chemistries and membrane characterization suggests the importance of other factors (such as unreacted functional groups and surface roughness) in determining membrane performance. We developed a molecular simulation model to qualitatively study the effects of various synthesis conditions on membrane performance, in terms of its estimated porosity and permeability. The model is of an interfacial aggregation process of two types of functional monomers. Film growth with time and structural characteristics of the final film are compared with predictions of existing theories and experimental observations.