Structure of the cro repressor from bacteriophage lambda and its interaction with DNA

A domain that assumes a Z-conformation includes a specific deletion in some cloned variants of a complex satellite

Sequence analyses show that deletions of 10 and 12 bp occur at homologous sites in a domain that is rich in alternating purines and pyrimidines (Pu/Py) in B42 and EXT, two cloned variants of a complex satellite DNA. A 3-bp deletion occurs 27 bp upstream from the site of the specific deletions in B42 and RU, a third cloned satellite variant that has not suffered the 10-bp deletion. Under torsional stress, the Pu/Py-rich domain adopts a Z-conformation as shown by (i) inhibition of cutting at a BssHII site that accounts for 2/5 of a 15-bp tract of pure Pu/Py in the domain; (ii) binding of polyclonal and monoclonal anti-Z-DNA antibodies to the domain; and (iii) antibody stabilization and subsequent relaxation of the Z-region.

Structure of the lambda complex at 2.5 A resolution: details of the repressor-operator interactions

The crystal structure of a complex containing the DNA-binding domain of lambda repressor and a lambda operator site was determined at 2.5 A resolution and refined to a crystallographic R factor of 24.2 percent. The complex is stabilized by an extensive network of hydrogen bonds between the protein and the sugar-phosphate backbone. Several side chains form hydrogen bonds with sites in the major groove, and hydrophobic contacts also contribute to the specificity of binding. The overall arrangement of the complex is quite similar to that predicted from earlier modeling studies, which fit the protein dimer against linear B-form DNA. However, the cocrystal structure reveals important side chain-side chain interactions that were not predicted from the modeling or from previous genetic and biochemical studies.

Mutant Trp repressors with new DNA-binding specificities

Oligonucleotide-directed mutagenesis of the codons for glutamine-68 (Gln68), lysine-72 (Lys72), isoleucine-79 (Ile79), alanine-80 (Ala80), and threonine-81 (Thr81) of the Escherichia coli trpR (tryptophan aporepressor) gene was used to make mutant repressors with each of 36 different amino acid changes. Mutant repressors were tested for binding to each member of a set of 28 different operators closely related to the consensus trp operator. Of the 36 mutant repressors, 11 bind a subset of the 28 operators; 5 of these have new binding specificities. These new specificities indicate that the hydroxyl group of Thr81 makes a specific contact with one of the four critical base pairs in a trp operator half-site, and the methyl group of Thr81 determines specificity at a second, critical base pair. The Trp repressor does not use the first two amino acids of its "recognition alpha-helix," Ile79 and Ala80, to make sequence-specific DNA contacts, and interacts with its operator in vivo in a way fundamentally different from the way that phage lambda repressor, lambda Cro protein, and coliphage 434 repressor contact their respective binding sites.

The yeast regulatory protein ADR1 binds in a zinc-dependent manner to the upstream activating sequence of ADH2

The yeast ADR1 protein contains two zinc finger domains that are essential for its role in transcriptional activation of alcohol dehydrogenase (ADH2). These domains are thought to function as DNA-binding structures. An ADR1-beta-galactosidase fusion protein made in Escherichia coli and containing the finger domains of ADR1 binds in vitro in a zinc-dependent manner to DNA fragments containing the two ADH2 upstream activation sequences. The strongest binding is to upstream activation sequence 1, a 22-base-pair palindrome.

Interaction of nuclear proteins with muscle-specific regulatory sequences of the human cardiac alpha-actin promoter

The human cardiac alpha-actin promoter is involved in the muscle-specific transcriptional regulation of the gene. In this study, we utilized gel mobility shift, methylation interference, and DNase I protection assays to examine protein factor interaction with the promoter in vitro. All assays demonstrated specific interaction of nuclear factors with a region of the promoter encompassed by nucleotides -93 to -113 base pairs from the transcriptional start site. This region contains a CC(A + T-rich)6GG element, termed a CArG box, which has previously been implicated in the muscle-specific transcriptional regulation of the gene by functional assays. Although the gene is only expressed in muscle cells, identical binding activity was present in nuclear extracts of all cell types examined, including those of muscle (C2, L8, and L6 cells) and nonmuscle (HeLa, NIH 3T3, HuT12, and L cells) origin. Furthermore, methylation interference assays showed that identical nucleotides interacted with factors isolated from C2 and HeLa cells. Competition studies showed that the CArG-binding factor, designated as CBF, also interacts with the c-fos serum responsive element, which contains a CArG element, but not with the simian virus 40 enhancer and early promoter. Thus, a region of the human cardiac alpha-actin promoter known to be functionally involved in muscle-specific regulation of the gene appears to interact in vitro, and in an identical manner, with a factor(s) which is neither muscle nor gene specific, suggesting a more complex mode of regulation than previously envisioned.

DNA binding by proteins

Study of proteins that recognize specific DNA sequences has yielded much information, but the field is still in its infancy. Already two major structural motifs have been discovered, the helix-turn-helix and zinc finger, and numerous examples of DNA-binding proteins containing either of them are known. The restriction enzyme Eco RI uses yet a different motif. Additional motifs are likely to be found as well. There is a growing understanding of some of the physical chemistry involved in protein-DNA binding, but much remains to be learned before it becomes possible to engineer a protein that binds to a specific DNA sequence.

Organization of the early region of bacteriophage phi 80. Genes and proteins

An EcoRI segment containing the early region of bacteriophage phi 80 DNA that controls immunity and lytic growth was identified as a segment whose presence on a plasmid prevented growth of infecting phi 80cI phage. The nucleotide sequence of the segment (EcoRI-F) and adjacent regions was determined. Based on the positions of amber mutations and the sizes of some gene products, the reading frames for five genes were identified. From the relative locations of these genes in the genome, the properties of some isolated gene products, and the analysis of the structures of predicted proteins, the following phi 80 to lambda analogies are deduced: genes cI and cII to their lambda namesakes; gene 30 to cro; gene 15 to O; and gene 14 to P. An amber mutation by which gene 16 was defined is a nonsense mutation in the frame for gene 15 protein, excluding the presence of gene 16. An amber mutation in gene 14 or 15 inhibits phage DNA synthesis, as is the case with their lambda analogues, gene O or P. Some characteristics of proteins from the early region predicted from their primary structures and their possible functions are discussed.

Saturation mutagenesis of the Tn10-encoded tet operator O1. Identification of base-pairs involved in Tet repressor recognition

Saturation mutagenesis of Tn10-encoded tet operator O1 was performed by chemical synthesis of 30 sequence variants yielding all possible point mutations of an operator half side. Their effect on Tet repressor binding was scored by an in-vivo repressor titration system. Tet repressor affinities of selected operator mutants were further characterized in vitro by dissociation rate measurements. The O1 sequence spans 19 base-pairs. Out of these, all 18 palindromic base-pairs are involved in Tet repressor recognition. The central base-pair does not contribute to sequence-specific binding of Tet repressor. At position 1 a pyrimidine residue is sufficient for maximal affinity to the repressor. At positions 2, 3 and 4, each mutation reduces repressor binding at least tenfold. Mutations at positions 5, 6, 7, 8 and 9 result in less drastic reductions of Tet repressor binding. Differential effects of mutations at a given position are used to deduce the chemical functions contacted by Tet repressor. The T.A to A.T transversion at position 9 increases Tet repressor affinity slightly, while all other mutations decrease repressor binding. The increased affinity of the wild-type tet operator O2 compared to wild-type O1 results from the addition of two favorable transversions at positions +/- 9 and an unfavorable T.A to C.G transition at position -7. Deletion or palindromic doubling of the central base-pair of the O1 palindrome reveals that the wild-type spacing of both operator half sides is crucial for efficient Tet repressor binding.

Three-dimensional structure of acyl carrier protein in solution determined by nuclear magnetic resonance and the combined use of dynamical simulated annealing and distance geometry

The solution conformation of acyl carrier protein from Escherichia coli (77 residues) has been determined on the basis of 423 interproton-distance restraints and 32 hydrogen-bonding restraints derived from NMR measurements. A total of nine structures were computed using a hybrid approach combining metric matrix distance geometry and dynamic simulated annealing. The polypeptide fold is well defined with an average backbone atomic root-mean-square difference of 0.20 +/- 0.03 nm between the final nine converged structures and the mean structure obtained by averaging their coordinates. The principal structural motif is composed of three helices: 1 (residues 3-12), 2 (residues 37-47) and 4 (residues 65-75) which line a hydrophobic cavity. Helices 2 and 4 are approximately parallel to each other and anti-parallel at an angle of approximately equal to 150 degrees to helix 1. The smaller helix 3 (residues 56-63) is at an angle of approximately equal to 100 degrees to helix 4.

Regulation of the penicillinase genes of Bacillus licheniformis: interaction of the pen repressor with its operators

The synthesis of the inducible enzyme penicillinase of Bacillus licheniformis is negatively controlled by a repressor (D.A. Dubnau and M.R. Pollock, J. Gen. Microbiol. 41:7-21, 1965; D. J. Sherratt and J. F. Collins, J. Gen. Microbiol. 76:217-230,1973). The molecular organization of the genes coding for penicillinase (penP) and its repressor (penI) has recently been determined (T. Himeno, T. Imanaka, and S. Aiba, J. Bacteriol. 168:1128-1132, 1986). These two genes are transcribed divergently from within a 364-nucleotide region separating the coding sequences. We cloned and sequenced the repressor gene (penIc) from strain 749/C that constitutively produces penicillinase. The penIc and penI+ (wild-type) genes were expressed in Escherichia coli. Complementation analysis indicated that the repressor is the only trans-acting protein required to regulate the expression of the penI and penP genes. We purified the wild-type repressor protein, used it in gel retardation and DNase I protection experiments, and identified three operators positioned in the region between the penP and penI coding sequences. The spatial arrangement of the operators and the hierarchy in repressor binding seen in the protection experiments indicate that (i) the penI gene product represses the expression of the penP gene by physically blocking the RNA polymerase-binding site and (ii) the penI gene is autoregulated.

DNA sequence determinants of CAP-induced bending and protein binding affinity

The sites of DNA bending induced by binding catabolite activator protein are identified and shown to coincide with positions where DNA grooves face the protein. The bendability of DNA with different sequences at these bend centres parallels the bending preference of the sequences in nucleosomal DNA. Anisotropic DNA bendability significantly affects the structure and strength of regulatory protein-DNA complexes.

Structure of the Tet repressor and Tet repressor-operator complexes in solution from electrooptical measurements and hydrodynamic simulations

The Tet repressor protein and tet operator DNA fragments and their complexes have been analyzed by electrooptical procedures. The protein shows a positive linear dichroism at 280 nm, a negative linear dichroism at 248 nm, and a strong permanent dipole moment of 3.5 X 10(-27) C m, which is independent of the salt concentration within experimental accuracy. Its rotation time constant of 40 ns indicates an elongated structure, which is consistent with a prolate ellipsoid of 100 A for the long axis and 40 A for the short axis. The time constant can also be fitted by a cylinder of length 78 A and diameter 37 A, which is consistent with nuclease protection data reported on repressor-operator complexes, if the cylinder axis is aligned parallel to the DNA axis. Addition of tetracycline induces changes of the limit dichroism but very little change of the rotation time constant. The rotation time constants observed for the operator DNA fragments show some deviations from the values expected from their contour length; however, these deviations remain relatively small. Formation of repressor-operator complexes leads to some increase of the DNA rotation time constants. Simulations by bead models demonstrate that these time constants can be explained without any major change of the hydrodynamic dimension of the components. The data for the complexes are fitted by bead models with smooth bending of the DNA corresponding to a radius of curvature of 500 A, but at the given accuracy, we cannot rule out that the DNA in the complex remains straight or is bent to a smaller radius of approximately 400 A. Thus, binding of the Tet repressor, which is a helix-turn-helix protein as judged from its sequence, to its operator seems to induce minor bending but does not induce strong bending of the DNA double helix.

The leucine zipper: a hypothetical structure common to a new class of DNA binding proteins

A 30-amino-acid segment of C/EBP, a newly discovered enhancer binding protein, shares notable sequence similarity with a segment of the cellular Myc transforming protein. Display of these respective amino acid sequences on an idealized alpha helix revealed a periodic repetition of leucine residues at every seventh position over a distance covering eight helical turns. The periodic array of at least four leucines was also noted in the sequences of the Fos and Jun transforming proteins, as well as that of the yeast gene regulatory protein, GCN4. The polypeptide segments containing these periodic arrays of leucine residues are proposed to exist in an alpha-helical conformation, and the leucine side chains extending from one alpha helix interdigitate with those displayed from a similar alpha helix of a second polypeptide, facilitating dimerization. This hypothetical structure is referred to as the "leucine zipper," and it may represent a characteristic property of a new category of DNA binding proteins.

The effect on the function of the transcriptional activator NtrC from Klebsiella pneumoniae of mutations in the DNA-recognition helix

We have constructed mutations in what we predict to be the DNA-recognition helix of Klebsiella pneumoniae NtrC, which regulates transcription from promoters under global nitrogen control. Mutations which disrupt the helix lead to complete loss of function. All point mutants tested were able to activate transcription from the sigma 54-dependent glnA promoter, but only those retaining some ability to recognise NtrC binding sites, as evidenced by their ability to repress the ntrB promoter and the upstream glnA promoter, were able to activate the nifL promoter. One mutant, which contained an amino acid substitution in the turn of the DNA-binding motif as well as in the recognition helix, suppressed mutations in the NtrC binding sites upstream from the nifL promoter, but only if both sites bore equivalent transitions. This confirms that the DNA-binding motif for this class of transcriptional activator has been correctly identified and suggests that binding of NtrC can be cooperative.

The bacteriophage lambda cohesive end site: isolation of spacing/substitution mutations that result in dependence on Escherichia coli integration host factor

Substitution, insertion and deletion mutations have been constructed at the XmnI restriction site in cos lambda. The XmnI site is located between cosB, the site where terminase binds lambda DNA; and cosN, the site where terminase introduces staggered nicks to generate cohesive ends. Substitution mutations and deletion of a base pair (a -1 change) do not obviously affect lambda growth and DNA packaging. Changes of -2, +2 and -3 render lambda unable to grow on host cells lacking integration host factor (IHF). The -3 mutant has a reduced burst size in IHF+ cells, due to a defect in the initiation of packaging. A -7 deletion mutation is lethal. Models for the basis of these mutational effects are discussed.

The Mnt repressor of bacteriophage P22: role of C-terminal residues in operator binding and tetramer formation

A set of C-terminal deletion mutants of the Mnt repressor of bacteriophage P22 has been constructed, and the corresponding truncated proteins have been purified. A truncated protein lacking the three C-terminal residues, Lys80-Thr81-Thr82, binds operator DNA with an affinity near wild type and has a normal tetrameric structure. Loss of the next residue, Lys79, causes a 600-fold decrease in operator affinity, but the truncated protein is still tetrameric. Further sequential deletions of Tyr78 and Leu77 cause modest decreases in operator affinity, but the truncated proteins are now dimeric. These results indicate that Lys79 is an important determinant of the high affinity of Mnt repressor for operator DNA and that Tyr78 is an important determinant of tetramer formation by Mnt repressor.

Crystallization of the met repressor from Escherichia coli

The met repressor from Escherichia coli has been crystallized in space group P21, with unit cell dimensions a = 35.6 A, b = 62.6 A, c = 44.5 A, beta = 102.4 degrees and one aporepressor dimer per asymmetric unit. Preliminary X-ray diffraction photographs show measurable intensities to beyond 1.5 A resolution, and the crystal form is ideally suited to high-resolution crystallographic analysis (1 A = 0.1 nm).

A theory of the symmetries of filamentous bacteriophages

A mathematical model is presented which explains the symmetries observed for the protein coats of filamentous bacterial viruses. Three viruses (Ff, IKe, and If1) all have five-start helices with rotation angles of 36 degrees and axial translations of 16 A (Type I symmetry), and three other viruses (Pf1, Xf, and Pf3) all have one-start helices with rotation angles of approximately equal to 67 degrees and translations of approximately 3 A (Type II symmetry). The coat protein subunits in each group diverge from each other in amino acid sequence, and Type II viruses differ dramatically in DNA structure. Regardless of the differences, both Type I and Type II symmetry can be understood as direct, natural consequences of the close-packing of alpha-helical protein subunits. In our treatment, an alpha-helical subunit is modeled as consisting of two interconnected, flexible tubular segments that follow helical paths around the DNA, one in an inner layer and the other in an outer layer. The mathematical model is a set of algebraic equations describing the disposition of the flexible segments. Solutions are described by newly introduced symmetry indices and other parameters. An exhaustive survey over the range of indices has produced a library of all structures that are geometrically feasible within our modeling scheme. Solutions which correspond in their rotation angles to Type I and Type II viruses occur over large ranges of the parameter space. A few solutions with other symmetries are also allowed, and viruses with these symmetries may exist in nature. One solution to the set of equations, obtained without any recourse to the x-ray data, yields a calculated x-ray diffraction pattern for Pf1 which compares reasonably with experimental patterns. The close-packing geometry we have used helps explain the near constant linear mass density of known filamentous phages. Helicoid, rigid cylinder, and maximum entropy structure models proposed by others for Pf1 are reconciled with the flexible tube models and with one another.

Recognition of DNA sequences by the repressor of bacteriophage 434

The structure of a complex between the DNA-binding domain of phage 434 repressor and a 14 base-pair synthetic DNA operator reveals the molecular interactions important for sequence-specific recognition. A set of contacts with DNA backbone, notably involving hydrogen bonds between peptide-NH groups and DNA phosphates, position the repressor and fix the DNA configuration. Direct interactions between amino acid side chains and DNA bases involve nonpolar van der Waals contacts as well as hydrogen bonds. The structures of the repressor domain and of the 434 cro protein are extremely similar. There appear to be no major conformational changes in the proteins when they bind to DNA.

Theoretical studies on alpha-helix--DNA interactions

The interaction energies between (Ala)10 and alpha-helix fragment and different nucleotide sequences in right-handed B-form have been optimized using semi-empirical potential energy functions. The energies are calculated for two different orientations of the alpha-helix, viz., when the alpha-helix axis taken in the N----C direction is (i) parallel and (ii) antiparallel to the 5'-3' ascending strand of DNA, proximal to it. When both the DNA molecule as well as the alpha-helix are treated as rigid molecules it is found that a polyalanine alpha-helix has slightly more favourable contacts when it is in the proximity of a four nucleotide sequence of 5'-(N-A-T-N)-3' type, where N is either a purine or a pyrimidine. However, when the two interacting molecules are allowed to undergo local structural variations then the interaction energy appears to be independent of the base sequence confirming the non-specific nature of these interactions.

Identification of the DNA binding domain of the phage lambda cII transcriptional activator and the direct correlation of cII protein stability with its oligomeric forms

The bacteriophage lambda transcriptional activator protein cII is a DNA-binding protein that coordinately regulates transcription from phage promoters important for lysogenic growth. We have genetically and structurally characterized more than 80 different single amino acid substitutions in this 97-amino-acid protein. A subset of 25 of these variant proteins was utilized for detailed biochemical analysis, which allows us to define specific domains critical for sequence-selective DNA recognition, nonspecific DNA binding, and protein oligomerization. The mutation studies also demonstrated the remarkable correlation of oligomeric structure of cII protein to its stability within the bacterial host. An Escherichia coli HtpR- strain has been identified that greatly stabilizes these highly unstable cII mutants.

Helix lap-joints as ion-binding sites: DNA-binding motifs and Ca-binding "EF hands" are related by charge and sequence reversal

The DNA-binding helix pairs in gene repressor and activator proteins were compared with other approximately perpendicular pairs of adjacent helices in the known protein structures. Two other examples of closely matching conformations were found in cytochrome c peroxidase (residues 153-174) and in ribosomal L7/L12 protein (residues 68-89). Another group of such offset "lap-joints" are the Ca-binding "EF hand" structures, which bind a positive rather than a negative ligand. The EF hands turn out to match the DNA-binding motifs quite well (outside of the loop) if their sequence direction is reversed. This conformation is thus not as unusual as had been thought, but may have a more generalized role in ion binding and occasionally occur in a purely structural role.

Identification of structural motifs from protein coordinate data: secondary structure and first-level supersecondary structure

A computer program is described that produces a description of the secondary structure and supersecondary structure of a polypeptide chain using the list of alpha carbon coordinates as input. Restricting the term "secondary structure" to the conformation of contiguous segments of the chain, the program determines the initial and final residues in helices, extended strands, sharp turns, and omega loops. This is accomplished through the use of difference distance matrices. The distances in idealized models of the segments are compared with the actual structure, and the differences are evaluated for agreement within preset limits. The program assigns 90-95% of the residues in most proteins to at least one type of secondary element. In a second step the now-defined helices and strands are idealized as straight line segments, and the axial directions and locations are compiled from the input C alpha coordinate list. These data are used to check for moderate curvature in strands and helices, and the secondary structure list is corrected where necessary. The geometric relations between these line segments are then calculated and output as the first level of supersecondary structure. A maximum of six parameters are required for a complete description of the relations between each pair. Frequently a less complete description will suffice, for example just the interaxial separation and angle. Both the secondary structure and one aspect of the supersecondary structure can be displayed in a character matrix analogous to the distance matrix format. This allows a quite accurate two-dimensional display of the three-dimensional structure, and several examples are presented. A procedure for searching for arbitrary substructures in proteins using distance matrices is also described. A search for the DNA binding helix-turn-helix motif in the Protein Data Bank serves as an example. A further abstraction of the above data can be made in the form of a metamatrix where each diagonal element represents an entire secondary segment rather than a single atom, and the off-diagonal elements contain all the parameters describing their interrelations. Such matrices can be used in a straightforward search for higher levels of supersecondary structure or used in toto as a representation of the entire tertiary structure of the polypeptide chain.

Crystallizing catabolite gene activator protein with cAMP for structural analysis

The crystal structure of the CAP dimer with cAMP has provided many insights into the action of this gene regulatory protein. The CAP subunit is divided into two domains that are connected by a hinge region. The carboxy-terminal domains bind to DNA and show both sequence and structural homologies with many other gene regulatory proteins from bacteria and viruses. The amino-terminal domain forms a binding site for cAMP and has been used to model the cAMP-binding domains of the regulatory subunits of mammalian cAMP-dependent protein kinase.

Flexibility of the DNA-binding domains of trp repressor

An orthorhombic crystal form of trp repressor (aporepressor plus L-tryptophan ligand) was solved by molecular replacement, refined to 1.65 A resolution, and compared to the structure of the repressor in trigonal crystals. Even though these two crystal forms of repressor were grown under identical conditions, the refined structures have distinctly different conformations of the DNA-binding domains. Unlike the repressor/aporepressor structural transition, the conformational shift is not caused by the binding or loss of the L-tryptophan ligand. We conclude that while L-tryptophan binding is essential for forming a specific complex with trp operator DNA, the corepressor ligand does not lock the repressor into a single conformation that is complementary to the operator. This flexibility may be required by the various binding modes proposed for trp repressor in its search for and adherence to its three different operator sites.

Quaternary structure and function in phage lambda repressor: 1H-NMR studies of genetically altered proteins

The quaternary structure and dynamics of phage lambda repressor are investigated in solution by 1H-NMR methods. lambda repressor contains two domains separable by proteolysis: an N-terminal domain that mediates sequence-specific DNA-A binding, and a C-terminal domain that contains strong dimer and higher-order contacts. The active species in operator recognition is a dimer. Although the crystal structure of an N-terminal fragment has been determined, the intact protein has not been crystallized, and there is little evidence concerning its structure. 1H-NMR data indicate that the N-terminal domain is only loosely tethered to the C-terminal domain, and that its tertiary structure is unperturbed by proteolysis of the "linker" polypeptide. It is further shown that in the intact repressor structure a quaternary interaction occurs between N-terminal domains. This domain-domain interaction is similar to the dimer contact observed in the crystal structure of the N-terminal fragment and involves the hydrophobic packing of symmetry-related helices (helix 5). In the intact structure this interaction is disrupted by the single amino-acid substitution, Ile84----Ser, which reduces operator affinity at least 100-fold. We conclude that quaternary interactions between N-terminal domains function to appropriately orient the DNA-binding surface with respect to successive major grooves of B-DNA.

Synthesis of a sequence-specific DNA-cleaving peptide

A synthetic 52-residue peptide based on the sequence-specific DNA-binding domain of Hin recombinase (139-190) has been equipped with ethylenediaminetetraacetic acid (EDTA) at the amino terminus. In the presence of Fe(II), this synthetic EDTA-peptide cleaves DNA at Hin recombination sites. The cleavage data reveal that the amino terminus of Hin(139-190) is bound in the minor groove of DNA near the symmetry axis of Hin recombination sites. This work demonstrates the construction of a hybrid peptide combining two functional domains: sequence-specific DNA binding and DNA cleavage.

Structure of a complex of catabolite gene activator protein and cyclic AMP refined at 2.5 A resolution

The structure of a dimer of the Escherichia coli catabolite gene activator protein has been refined at 2.5 A resolution to a crystallographic R-factor of 20.7% starting with coordinates fitted to the map at 2.9 A resolution. The two subunits are in different conformations and each contains one bound molecule of the allosteric activator, cyclic AMP. The amino-terminal domain is linked to the smaller carboxy-terminal domain by a nine-residue hinge region that exists in different conformations in the two subunits, giving rise to approximately a 30 degree rotation between the positions of the small domains relative to the larger domains. The amino-terminal domain contains an antiparallel beta-roll structure in which the interstrand hydrogen bonding is well-determined. The beta-roll can be described as a long antiparallel beta-ribbon that folds into a right-handed supercoil and forms part of the cyclic AMP binding site. Each cyclic AMP molecule is in an anti conformation and has ionic and hydrogen bond interactions with both subunits.

Characterization of the binding sites of c1 repressor of bacteriophage P1. Evidence for multiple asymmetric sites

The repressor of bacteriophage P1, encoded by the c1 gene, is responsible for maintaining a P1 prophage in the lysogenic state. In this paper we present: (1) the sequence of the rightmost 943 base-pairs of the P1 genetic map that includes the 5'-terminal 224 base-pairs of the c1 gene plus its upstream region; (2) the construction of a plasmid that directs the production of approximately 5% of the cell's protein as P1 repressor; (3) a deletion analysis that establishes the startpoint of P1 repressor translation; (4) filter binding experiments that demonstrate that P1 repressor binds to several regions upstream from the c1 gene; (5) DNase I footprint experiments that directly identify two of the P1 repressor binding sites. Sequences very similar to the identified binding sites occur in at least 11 sites in P1, in most cases near functions known, or likely, to be controlled by repressor. From these sites we have derived the consensus binding site sequence ATTGCTCTAATAAATTT. We suggest that, unlike other phage operators, the P1 repressor binding sites lack rotational symmetry.

Studies on the origin-specific DNA-binding domain of simian virus 40 large T antigen

The origin-specific DNA-binding domain of simian virus 40 large T antigen was analyzed, and its C-terminal boundary was found to be at or before amino acid 259. This does not include the zinc finger structural motif located at amino acids 302 to 320 (J. M. Berg, Science 232:485-486, 1986). Interestingly, N-terminal fragments of 266 and 272 amino acids and larger displayed dramatically reduced origin-binding activity. In addition, the specific DNA-binding properties of truncated proteins purified from both bacterial and mammalian sources were compared. Truncated T antigens from mammalian cells bound specific DNA fragments more efficiently than did their bacterial counterparts. These results implicate posttranslational modification with a role in regulating the DNA-binding activity of large T antigen.

GCN4, a eukaryotic transcriptional activator protein, binds as a dimer to target DNA

The eukaryotic transcriptional activator protein, GCN4, synthesized in vitro from the cloned gene, binds specifically to the promoters of yeast amino acid biosynthetic genes. Previous analysis of truncated GCN4 derivatives localized the DNA binding domain to the C-terminal 60 amino acids and revealed that the size of the GCN4 derivative and the electrophoretic mobility of the protein-DNA complex were inversely related. This observation was utilized here to develop a novel method for determining the subunit structure of DNA binding proteins. A mixture of wild-type GCN4 protein and a smaller GCN4 derivative generated three complexes with DNA, two corresponding to those observed when the proteins are present individually and one new complex of intermediate mobility. This extra complex results from the heterodimer of the two GCN4 proteins of different sizes, demonstrating that GCN4 binds DNA as a dimer. The contacts sufficient for dimerization were localized to the 60 C-terminal amino acid, DNA binding domain, suggesting that dimerization of GCN4 is a critical aspect of specific DNA binding. Furthermore, stable GCN4 dimers were formed in the absence of target DNA. These observations suggest a structural model of GCN4 protein in which a dimer binds to overlapping and non-identical half-sites, explaining why GCN4 recognition sites act bidirectionally in stimulating transcription.

Crystallization and X-ray diffraction studies of a 434 Cro-DNA complex

Crystals have been obtained of the bacteriophage 434 Cro protein bound to a synthetic DNA operator. An analysis of the packing shows that the complexes stack end-to-end along crystallographic axis, forming long rods with non-crystallographic 11(3) screw symmetry. The average number of DNA base-pairs per turn is 10.27, which is somewhat more overwound as compared with the 434 repressor-DNA crystals of Anderson et al. Diffraction extends to 3 A along the rod direction and to 5 A in perpendicular directions.

Affinities of tight-binding lactose repressors for wild-type and pseudo-operators

Five tight-binding (Itb) mutants of the Escherichia coli lactose (lac) repressor have been characterized with regard to their non-specific affinity for DNA and their specific affinity for the wild-type operator and several sequence-altered (pseudo-) operators. Repressor-operator association rates were determined in the presence or absence of competitor DNA, dissociation rates of repressor from various DNA fragments were measured, and equilibrium competition for repressor binding was examined for several pseudo-operator DNAs. The mutant repressors exhibited increased non-specific affinity for DNA, and variable increases in affinity for sequence-altered operators. The known positions of amino acid substitutions for three of these Itb repressors support suggestions that residues 51 to 64 are important for operator recognition in addition to residues 1 to 50.

Pseudogene in the genome of bacteriophage lambda?

We find a region in the non-coding part of bacteriophage lambda genome that codes for the conserved fold which repressors and other proteins use for specific DNA binding. The region is involved in a long open reading frame exceeding one kilobase and is read in the same frame as gene A in the opposite strand. The putative translation product of this open reading frame has a highly ordered secondary structure with a predominance of alpha helices, which is typical of repressors. In addition, codon usage in this frame suggests a protein-coding region. However, there is a TGA stop codon located between the putative gene start point and the region coding for the DNA binding fold. It thus appears that bacteriophage lambda had one more DNA binding protein, perhaps repressor, in the past that was inactivated by a mutation.

Bacteriophage P22 Mnt repressor. DNA binding and effects on transcription in vitro

We have examined the binding of Mnt repressor to operator DNA in vitro and have determined how this binding affects the level of transcription from two nearby promoters, Pant and Pmnt. Mnt binds to a region of DNA that overlaps the startpoint of transcription of Pant and the -35 region of Pmnt. Mnt represses transcription in vitro from Pant and enhances transcription from Pmnt. Protection and interference experiments show that Mnt binds to a single, 17 base-pair operator site. The operator sequence and the protein-DNA contacts are symmetric. Mnt makes major groove contacts on both faces of the operator DNA. At pH 7.5, 200 mM-KCl, 22 degrees C, the Mnt tetramer binds operator with high affinity (Kd = 2.2 X 10(-11M) and the protein-DNA complex is quite stable (t1/2 = 48 min). Operator binding shows large dependencies on pH, salt concentration, and temperature.

Structure of the repressor-operator complex of bacteriophage 434

The crystal structure of a specific complex between the DNA-binding domain of phage 434 repressor and a synthetic 434 operator DNA shows interactions that determine sequence-dependent affinity. The repressor recognizes its operators by its complementarity to a particular DNA conformation as well as by direct interaction with base pairs in the major groove.

Yeast HAP1 activator binds to two upstream activation sites of different sequence

We show that the HAP1 protein binds in vitro to the upstream activation site (UAS) of the yeast CYC7 gene. Strikingly, this sequence bears no obvious similarity to the sequence bound by HAP1 at UAS1 of the CYC1 gene. The CYC1 and CYC7 sites compete for binding to HAP1 and have comparable affinities for the protein. The gross features of the interaction of HAP1 with the two sites are similar: multiple major and minor groove contacts, spanning 23 bp, on one helical face, with a back-side major groove contact toward one end. The precise positions of the contacts differ, however. A mutant form of HAP1, HAP1-18, abolishes the ability of the protein to bind to UAS1 but not CYC7 DNA. Possible mechanisms for how a single protein recognizes two sequences are discussed.

Probing the sequence-specific interaction of the cyclic AMP receptor protein with DNA by site-directed mutagenesis

Mutants in the DNA-binding helix of the cyclic AMP receptor protein (CRP), as well as mutants in a synthetic DNA-binding site derived from the sequence in the lac regulatory region, have been constructed by oligonucleotide-directed mutagenesis, and used to study the effect of selected amino acid substitutions on CRP-mediated transcriptional activity and on sequence-specific DNA binding. It has been shown that mutation of Arg-180 to Lys or Leu abolishes both CRP-mediated expression of beta-galactosidase in vivo and CRP binding of DNA as measured by immunoprecipitation. In contrast, the mutation of Arg-185 to Leu or Lys and the mutation of Lys-188 to Leu does not appear to influence these two parameters significantly. On the DNA side, both substitutions studied, namely the exchange of the G . C base pair in position 2 of the consensus T1G2T3G4A5 motif into an A . T base pair and the exchange of the A . T base pair in position 5 for a G . C base pair, abolish specific binding. Implications of these findings with respect to the present models for specific CRP-DNA recognition are discussed.

Complex of lac repressor headpiece with a 14 base-pair lac operator fragment studied by two-dimensional nuclear magnetic resonance

Two-dimensional nuclear Overhauser enhancement spectra are presented of the complex of lac repressor headpiece with a 14 base-pair lac operator fragment. Analysis of nuclear Overhauser enhancements observed between protein and DNA shows that the second helix of the headpiece ("the recognition helix") binds in the major groove of DNA as has been suggested, but that the orientation of this helix is approximately 180 degrees different from the proposed models.