Towards high charge-carrier mobilities by rational design of the shape and periphery of discotics

Electron transport characteristics in nanosegregated columnar phases of perylene tetracarboxylic bisimide derivatives bearing oligosiloxane chains

An electron transport process in columnar phases of perylene tetracarboxylic bisimide derivatives is analyzed based on the one-dimensional Gaussian disorder model.

Potential-driven molecular tiling of a charged polycyclic aromatic compound

Electrochemical potential causes molecular tiling of organic ions at the solid–liquid interface with supramolecular motifs that contain between 2 and 7 tectons.

Studies on the Langmuir–Blodgett films of polythiophene containing a mesogenic side chain

LB study of mesogenic polythiophenes showed changes in optical properties due to variations in supramolecular assembly with solvent polarity.

Crystal design using multipolar electrostatic interactions: A concept study for organic electronics

Using a simple synthetic protocol, heterohexacene analogues with a quadrupolar distribution of partial charges are readily available. In contrast to most other acenes, these compounds crystallize with a slipped-stack, brickwork-like packing which is mainly controlled by electrostatic interactions. This type of packing offers an advantage for organic semiconductors, because it allows more isotropic charge transport compared to the “herring bone” stacking observed for other acenes.

Extended Hückel method calculation of polarization energies: the case of a benzene dimer

We adapted Hoffmann's extended Hückel method to an interacting molecular system and use this approach to compute the electron affinity and ionization potential of benzene dimers. We restrict the added charge to one of the molecules and argue that the dimer energy computed in this manner is the relevant energy in any meaningful thermally activated hopping rate expression. The dimer electron affinity and ionization potential differs from the isolated molecule corresponding quantity by what is called polarization energy. The polarization energy normally stabilizes the anion and this is particularly relevant for benzene, given that its isolated anion is unstable with respect to charge detachment. We found that the anionic benzene dimer is only stabilized in certain conformations, suggesting that the stabilization of a benzene anion in an amorphous environment is very unlikely. The modest computational cost of the method makes it a viable alternative to compute the energy of charged molecules in amorphous molecular films, a central issue in the problem of charge transport in organic electronics.

Sensor Arrays Based on Polycyclic Aromatic Hydrocarbons: Chemiresistors versus Quartz-Crystal Microbalance

Arrays of broadly cross-reactive sensors are key elements of smart, self-training sensing systems. Chemically sensitive resistors and quartz-crystal microbalance (QCM) sensors are attractive for sensing applications that involve detection and classification of volatile organic compounds (VOCs) in the gas phase. Polycyclic aromatic hydrocarbon (PAH) derivatives as sensing materials can provide good sensitivity and robust selectivity towards different polar and nonpolar VOCs, while being quite tolerant to large humidity variations. Here, we present a comparative study of chemiresistor and QCM arrays based on a set of custom-designed PAH derivatives having either purely nonpolar coronas or alternating nonpolar and strongly polar side chain termination. The arrays were exposed to various concentrations of representative polar and nonpolar VOCs under extremely varying humidity conditions (5-80% RH). The sensor arrays' classification ability of VOC polarity, chemical class and compound separation was explained in terms of the sensing characteristics of the constituent sensors and their interaction with the VOCs. The results presented here contribute to the development of novel versatile and cost-effective real-world VOC sensing platforms.

Supramolecular helices: chirality transfer from conjugated molecules to structures

Different scales of chirality endow a material with many excellent properties and potential applications. In this review, using π-conjugated molecules as functional building blocks, recent progress on supramolecular helices inspired by biological helicity is summarized. First, induced chirality on conjugated polymers and small molecules is introduced. Molecular chirality can be amplified to nanostructures, superstructures, and even macroscopic structures by a self-assembly process. Then, the principles for tuning the helicity of supramolecular chirality, as well as formation of helical heterojunctions, are summarized. Finally, the potential applications of chiral structures in chiral sensing and organic electronic devices are critically reviewed. Due to recent progress in chiral structures, an interdisciplinary area called "chiral electronics" is expected to gain wide popularity in the near future.

Solid-state NMR in macromolecular systems: insights on how molecular entities move

The function of synthetic and natural macromolecularsystems critically depends on the packing and dynamics of the individual components of a given system. Not only can solid-state NMR provide structural information with atomic resolution, but it can also provide a way to characterize the amplitude and time scales of motions over broad ranges of length and time. These movements include molecular dynamics, rotational and translational motions of the building blocks, and also the motion of the functional species themselves, such as protons or ions. This Account examines solid-state NMR methods for correlating dynamics and function in a variety of chemical systems. In the early days, scientists thought that the rotationalmotions reflected the geometry of the moving entities. They described these phenomena as jumps about well-defined axes, such as phenyl flips, even in amorphous polymers. Later, they realized that conformational transitions in macromolecules happen in a much more complex way. Because the individual entities do not rotate around well-defined axes, they require much less space. Only recently researchers have appreciated the relative importance of large angle fluctuations of polymers over rotational jumps. Researchers have long considered that cooperative motions might be at work, yet only recently they have clearly detected these motions by NMR in macromolecular and supramolecular systems. In correlations of dynamics and function, local motions do not always provide the mechanism of long-range transport. This idea holds true in ion conduction but also applies to chain transport in polymer melts and semicrystalline polymers. Similar chain motions and ion transport likewise occur in functional biopolymers, systems where solid-state NMR studies are also performed. In polymer science, researchers have appreciated the unique information on molecular dynamics available from advanced solid-state NMR at times, where their colleagues in the biomacromolecular sciences have emphasized structure. By contrast, following X-ray crystallographers, researchers studying proteins using solution NMR introduced the combination of NMR with computer simulation before that became common practice in solid-state NMR. Today's simulation methods can handle partially ordered or even disordered systems common in synthetic polymers. Thus, the multitechnique approaches employed in NMR of synthetic and biological macromolecules have converged. Therefore, this Account will be relevant to both researchers studying synthetic macromolecular and supramolecular systems and those studying biological complexes.

Development of structural complexity by liquid-crystal self-assembly

Since the discovery of the liquid-crystalline state of matter 125 years ago, this field has developed into a scientific area with many facets. This Review presents recent developments in the molecular design and self-assembly of liquid crystals. The focus is on new exciting soft-matter structures distinct from the usually observed nematic, smectic, and columnar phases. These new structures have enhanced complexity, including multicompartment and cellular structures, periodic and quasiperiodic arrays of spheres, and new emergent properties, such as ferroelctricity and spontaneous achiral symmetry-breaking. Comparisons are made with developments in related fields, such as self-assembled monolayers, multiblock copolymers, and nanoparticle arrays. Measures of structural complexity used herein are the size of the lattice, the number of distinct compartments, the dimensionality, and the logic depth of the resulting supramolecular structures.

Liquid-crystalline ordering as a concept in materials science: from semiconductors to stimuli-responsive devices

While the unique optical properties of liquid crystals (LCs) are already well exploited for flat-panel displays, their intrinsic ability to self-organize into ordered mesophases, which are intermediate states between crystal and liquid, gives rise to a broad variety of additional applications. The high degree of molecular order, the possibility for large scale orientation, and the structural motif of the aromatic subunits recommend liquid-crystalline materials as organic semiconductors, which are solvent-processable and can easily be deposited on a substrate. The anisotropy of liquid crystals can further cause a stimuli-responsive macroscopic shape change of cross-linked polymer networks, which act as reversibly contracting artificial muscles. After illustrating the concept of liquid-crystalline order in this Review, emphasis will be placed on synthetic strategies for novel classes of LC materials, and the design and fabrication of active devices.

Coexistence of helical morphologies in columnar stacks of star-shaped discotic hydrazones

Discotic hydrazone molecules are of particular interest as they form discotic phases where the discs are rigidified by intramolecular hydrogen bonds. Here, we investigate the thermotropic behavior and solid-state organizations of three discotic hydrazone derivatives with dendritic groups attached to their outer peripheries, containing six, eight, and ten carbons of linear alkoxy chains. On the basis of two-dimensional wide angle X-ray scattering (2DWAXS), the elevated temperature liquid crystalline (LC) phases were assigned to a hexagonal columnar (Colh) organization with nontilted hydrazone discs for all three compounds. With WAXS, advanced solid-state nuclear magnetic resonance (SSNMR) techniques, and ab initio computations, the compounds with six and ten carbons of achiral alkoxy side chains were further subjected to studies at 25 °C, revealing complex crystalline phases with rigid columns and flexible side chains. This combined approach led to models of coexisting helical columnar stacking morphologies for both systems with two different tilt/pitch angles between successive hydrazone molecules. The differences in tilt/pitch angles between the two compounds illustrate that the columns with short alkoxy chains (six carbons) are more influenced by the presence of other stacks in their vicinity, while those with long side chains are less tilted due to a larger alkoxy (ten carbons) buffer zone. The formation of different packing morphologies in the crystalline phase of a columnar LC has rarely been reported so far, which suggests the possibility of complex stacking structures of similar organic LC systems, utilizing small molecules as potential materials for applications in organic electronics.

Self-assembly and near perfect macroscopic alignment of fluorescent triangulenium salt in spin-cast thin films on PTFE

Highly fluorescent, discotic trioxatriangulenium dyes were aligned by simple spin-casting on substrates with friction transferred PTFE layers. The fluorescent crystalline thin films show near perfect macroscopic alignment on centimeter large areas directly from spin-casting. Gracing Incidence X-ray Diffraction (GIXD) unambiguously allowed the determination of a long-range order unit cell as well as its orientation with respect to the PTFE fibers. Further analysis of the X-ray data, in conjunction with polarized absorption spectroscopy, suggest a lamellar packing model with alternating layers of alkyl chains and ionic dyes oriented parallel to the substrate. This structure results in a highly anisotropic electrostatic potential around the cationic chromophore, causing significant shifts in energy and orientation of the optical transitions. Thus, the optical properties of the material are, to a large extent, controlled by the position of the otherwise inert PF6(-) counterions. The bright fluorescence from the films is also polarized parallel to the PTFE alignment layer. Doping of the thin films with fluorescent energy acceptor traps shows that efficient exciton migration takes place in the thin films. The excellent exciton transfer capabilities, in conjunction with the perfect alignment, might be of interest in future applications in solar energy harvesting or as thin film sensors.

Columnar self-assembly in electron-deficient heterotriangulenes

A series of soluble carbonyl-bridged heterotriangulenes, in which flexible n-dodecyl chains are attached through different spacers to the planar nitrogen-centered polycyclic core, have been synthesized. The introduction of triisopropylsilylethynyl moieties enabled, for the first time, the characterization of single-crystal columnar packing of a substituted heterotriangulene by X-ray crystallography. Electrochemical studies disclosed the carbonyl-bridged heterotriangulene core as a reasonably strong acceptor for a reversible two-electron transfer. The tendency of substituted heterotriangulenes to self-assemble in solution, on surfaces, and in the bulk appeared to sensitively depend on the nature of the lateral substituents, their steric demand, and the applied solution processing conditions. It can be concluded that 1) additional phenylene moieties between the heterotriangulene core and the n-dodecyl chains facilitate self-assembly by extending the π-conjugated polycyclic disc, 2) the rod-like ethynylene spacers introduce some additional flexibility and hence lower the overall aggregation tendency, and 3) the combination of both features in the phenylene-ethynylene moieties induces thermotropic liquid crystallinity.

Soluble conjugated one-dimensional nanowires prepared by topochemical polymerization of a butadiynes-containing star-shaped molecule in the xerogel state

A star-shaped molecule with three butadiyne moieties attached to a central phenyl core was self-assembled via organogel formation in different solvents and subjected to UV irradiation in its xerogels form to give a soluble conjugated 1D nanowire made of three connected polydiacetylene (PDA) chains. The resulting polymer has a slightly lower optical band gap than its linear counterpart and presents no chromism property, indicative of the rigid nature of the polymer thus obtained.

ELLAGIC ACID DIRECTED GROWTH OF Au–Pt BIMETALLIC NANOPARTICLES AND THEIR CATALYTIC APPLICATIONS

In this work, we report the facile formation of bimetallic nanoparticles of Au–Pt in the presence of the plant polyphenol ellagic acid (EA). It was found that EA formed micro-fibrillar assemblies, which aggregated into micro-bundles under aqueous conditions. Those micro-bundles acted as templates for the growth of Au nanoparticles, as well as bimetallic Au–Pt nanoparticles biomimetically. At higher concentrations of EA, it was observed that in addition to forming fibrous micro-bundles, columnar assemblies of EA were formed in the presence of the metal nanoparticles. The formation of the assemblies was found to be concentration dependent. It appears that upon binding to metal ions and subsequent formation of the nanoparticles, morphological changes occur in the case of EA assemblies. The morphological changes observed were probed by electron microscopy. Further, the ability of the materials to degrade the toxic aromatic nitro compound 2-methoxy-4-nitroaniline was explored, where 50% degradation was observed within 15 min, indicating that such hybrid materials may have potential applications in environmental remediation.

Cation modules as building blocks forming supramolecular assemblies with planar receptor-anion complexes

Ion-based materials were fabricated through ion pairing of planar receptor-anion complexes and cation modules as negatively and positively charged building blocks, respectively. Anion receptors that could not form soft materials by themselves provided mesophases upon anion binding and subsequent ion pairing with aliphatic cation modules. The mesogenic behaviors were affected by structural modification of both the cation module and the anion receptor. Synchrotron X-ray diffraction measurements suggested the formation of columnar mesophases with contributions from charge-by-charge and charge-segregated arrangements. Flash-photolysis time-resolved microwave conductivity measurements further revealed a higher charge-carrier mobility in the assembly with a large contribution from the charge-segregated arrangement than in the charge-by-charge-based assembly.

Band formation in a molecular quantum well via 2D superatom orbital interactions

By scanning tunneling microscopy and spectroscopy, we study nearly free electron band formation of the σ* lowest unoccupied molecular orbital of C6F6 on a Cu(111) surface. In fractal islands, the lowest unoccupied molecular orbital energy systematically stabilizes with the number of interacting near-neighbor C6F6 molecules. Density functional theory calculations reveal the origin of effective intermolecular orbital overlap in the previously unrecognized superatom character of the σ* orbital of C6F6 molecules. The discovery of superatom orbitals in planar molecules offers a new universal principle for effective band formation, which can be exploited in designing organic semiconductors with nearly free electron properties.

Arrays of aligned supramolecular wires by macroscopic orientation of columnar discotic mesophases

Structure formation, phase behavior, and dynamics of mono-bromo hexa-peri-hexabenzocoronene (HBC-Br) are strongly affected by the confinement of cylindrical nanopores with rigid walls. Using self-ordered nanoporous anodic aluminum oxide (AAO)-containing arrays of aligned nanopores with narrow size distribution as a confining matrix, pronounced alignment of the HBC-Br columns along the nanopore axes was found to be independent of the pore diameter. Hence, arrays of one-dimensional supramolecular HBC-Br wires with the columns uniformly oriented along the wire axes on a macroscopic scale were obtained, unlike with discotics bearing smaller cores. The formation of the crystalline herringbone structure is shifted to lower temperatures in nanopores with diameters of a few hundred nanometers, whereas the formation of this low-temperature phase is completely suppressed when the pore diameter is below 20 lattice parameters. Moreover, the cylindrical confinement affects the disk axial dynamics as well as the distribution of relaxation times.

Doped polycyclic aromatic hydrocarbons as building blocks for nanoelectronics: a theoretical study

Density functional theory (DFT) and semiempirical UHF natural orbital configuration interaction (UNO-CI) calculations are used to investigate the effect of heteroatom substitution at the central position of a model polycyclic aromatic hydrocarbon. The effects of the substitution on structure, strain, electronic and spectral properties, and aromaticity of the compounds are discussed.