Highly sensitive and selective fluoride detection in water through fluorophore release from a metal-organic framework

The detection, differentiation and visualization of compounds such as gases, liquids or ions are key challenges for the design of selective optical chemosensors. Optical chemical sensors employ a transduction mechanism that converts a specific analyte recognition event into an optical signal. Here we report a novel concept for fluoride ion sensing where a porous crystalline framework serves as a host for a fluorescent reporter molecule. The detection is based on the decomposition of the host scaffold which induces the release of the fluorescent dye molecule. Specifically, the hybrid composite of the metal-organic framework NH₂-MIL-101(Al) and fluorescein acting as reporter shows an exceptional turn-on fluorescence in aqueous fluoride-containing solutions. Using this novel strategy, the optical detection of fluoride is extremely sensitive and highly selective in the presence of many other anions.

A fluorescent probe based on hydroxylnaphthalene 2-cyanoacrylate: fluoride ion detection and its bio-imaging in live cells

A novel ratiometric fluorescent probe based on hydroxylnaphthalene 2-cyanoacrylate shows a high selectivity for fluoride ions and can be used for intracellular imaging.

A tetranaphthoimidazolium receptor as a fluorescent chemosensor for phytate

A new tetranaphthoimidazolium receptor showed a selective fluorescence enhancement with phytate, myo-inositol hexakisphosphate (IP₆), in 100% aqueous solution at pH 7.4.

Phenylboronic acid-functionalized polymeric micelles with a HepG2 cell targetability

Phenylboronic acid-functionalized amphiphilic block copolymer Pluronic-PMCC-BA was synthesized via ring-opening polymerization of 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one (MBC) with fumaric acid as a catalyst followed by the deprotection of carboxyl groups by catalyzed hydrogenation and the condensation of 3-aminophenylboronic acid with the copolymer side groups. Pluronic-PMCC-BA can form stable micelle solution by self-assembly in water. The phenylboronic acid groups are located at the shell of micelle as proved by (1)H NMR. The diameter of drug-free micelles is approximate 60 nm. Nano-spheres with narrow size distribution could be observed in the TEM image. MTT assay results show that Pluronic-PMCC-BA exhibits slight cytotoxicity when the polymer concentration is higher than 25 μg mL(-1). The toxicities of DOX@Pluronic-PMCC and DOX@Pluronic-PMCC-BA to COS7, HeLa, and HepG2 cell lines are similar with those of free DOX. Interestingly, phenylboronic acid groups located at the surface of Pluronic-PMCC-BA micelles can recognize HepG2 cells and promote the drug uptake of the cells, which are observed by confocal laser scanning microscopy (CLSM). The results imply that Pluronic-PMCC-BA would be a promising material for targeted drug delivery to the cancer cells.

Polydiacetylenes bearing boronic acid groups as colorimetric and fluorescence sensors for cationic surfactants

A new polydiacetylene oxyphenylboronic acid (PDA-OPBA-1) bearing group was synthesized and showed diverse colorimetric changes, such as yellow, orange, and red, upon the addition of cationic surfactants at pH 7.4. On the other hand, anionic surfactants and simple ammonium salts did not show any color change. Specifically, color changes to yellow for cetyl trimethylammonium chloride (CTAC), red for dodecyl trimethylammonium bromide (DTAB), orange for benzylcetyldimethylammonium chloride (BCDA), and dark orange for hexadecylpyridium bromide (HDPB) are observed, respectively. Different head groups and alkyl chain lengths of cationic surfactants can be intelligently distinguished via a unique penetration process.

α-Monoacylated and α,α'- and α,β'-diacylated dipyrrins as highly sensitive fluorescence "turn-on" Zn2+ probes

With the purpose of developing readily synthesized CHEF (chelation-enhanced fluorescence) type Zn(2+) probes with relatively simple molecular structures and excellent sensing behavior, p-anisoyl chloride was used for the acylation of 5-(pentafluorophenyl)dipyrromethane. Interestingly, the α,β'-diacylated product PS2 with a unique substitution mode was obtained in high yield in addition to the normal α-substituted mono- and diacylated products PS1 and PS3. Further oxidation of PS1-PS3 afforded dipyrrins S1-S3. Crystal structure and (1)H NMR measurements of S2 demonstrate the existence of a pure tautomer, which is consistent with DFT calculations. S1-S3 show highly Zn(2+) selective "turn-on" fluorescence based on a CHEF mechanism by the formation of 2:1 (probe:metal) Zn(2+) complexes. The emission colors can be easily tuned from green to red by changing the dipyrrin substitution modes. Furthermore, these probes demonstrate fast responses and wide applicable pH ranges. Among them, S2 shows the highest Zn(2+) sensitivity, with a detection limit of 4.4 × 10(-8) M.

Synthesis of dithienosilole-based highly photoluminescent donor-acceptor type compounds

Highly photoluminescent acceptor-donor-acceptor (A-D-A) and donor-acceptor (D-A) type compounds with a dithienosilole unit as the donor and perfluorotolyl or dimesitylboryl group(s) as the acceptor were prepared by the reaction of lithiated dithienosilole derivatives with perfluorotoluene or fluorodimesitylborane, respectively. The resulting A-D-A and D-A type compounds showed red-shifted UV absorption and PL bands compared to those of simple dithienosiloles having no acceptor units, reported previously, and were highly photoluminescent in the solid state as well as in solution. Solvatochromic behaviour that would arise from the intramolecular donor-acceptor interaction were observed for the D-A type compounds with respect to the UV absorption and PL spectra. In addition, it was found that bis(dimesitylboryl)dithienosilole and (dimesitylboryl)(methylthio)dithienosilole responded to coexisting fluoride anions, leading to clear UV absorption and PL spectral changes in solutions.

Exploiting the reversible covalent bonding of boronic acids: recognition, sensing, and assembly

Boronic acids can interact with Lewis bases to generate boronate anions, and they can also bind with diol units to form cyclic boronate esters. Boronic acid based receptor designs originated when Lorand and Edwards used the pH drop observed upon the addition of saccharides to boronic acids to determine their association constants. The inherent acidity of the boronic acid is enhanced when 1,2-, 1,3-, or 1,4-diols react with boronic acids to form cyclic boronic esters (5, 6, or 7 membered rings) in aqueous media, and these interactions form the cornerstone of diol-based receptors used in the construction of sensors and separation systems. In addition, the recognition of saccharides through boronic acid complex (or boronic ester) formation often relies on an interaction between a Lewis acidic boronic acid and a Lewis base (proximal tertiary amine or anion). These properties of boronic acids have led to them being exploited in sensing and separation systems for anions (Lewis bases) and saccharides (diols). The fast and stable bond formation between boronic acids and diols to form boronate esters can serve as the basis for forming reversible molecular assemblies. In spite of the stability of the boronate esters' covalent B-O bonds, their formation is reversible under certain conditions or under the action of certain external stimuli. The reversibility of boronate ester formation and Lewis acid-base interactions has also resulted in the development and use of boronic acids within multicomponent systems. The dynamic covalent functionality of boronic acids with structure-directing potential has led researchers to develop a variety of self-organizing systems including macrocycles, cages, capsules, and polymers. This Account gives an overview of research published about boronic acids over the last 5 years. We hope that this Account will inspire others to continue the work on boronic acids and reversible covalent chemistry.

Dual sensing of fluoride ions by the o-carborane-triarylborane dyad

The o-carborane-triarylborane dyad shows high fluoride ion affinity through the trigonal-planar boron center while degradation to nido-carborane leads to a turn-on fluorescence response toward fluoride.

A PEGylated fluorescent turn-on sensor for detecting fluoride ions in totally aqueous media and its imaging in live cells

Owing to the considerable significance of fluoride anions for health and environmental issues, it is of great importance to develop methods that can rapidly, sensitively and selectively detect the fluoride anion in aqueous media and biological samples. Herein, we demonstrate a robust fluorescent turn-on sensor for detecting the fluoride ion in a totally aqueous solution. In this study, a biocompatible hydrophilic polymer poly(ethylene glycol) (PEG) is incorporated into the sensing system to ensure water solubility and to enhance biocompatibility. tert-Butyldiphenylsilyl (TBDPS) groups were then covalently introduced onto the fluorescein moiety, which effectively quenched the fluorescence of the sensor. Upon addition of fluoride ion, the selective fluoride-mediated cleavage of the Si-O bond leads to the recovery of the fluorescein moiety, resulting in a dramatic increase in fluorescence intensity under visible light excitation. The sensor is responsive and highly selective for the fluoride anion over other common anions; it also exhibits a very low detection limit of 19 ppb. In addition, this sensor is operative in some real samples such as running water, urine, and serum and can accurately detect fluoride ions in these samples. The cytotoxicity of the sensor was determined to be Grade I toxicity according to United States Pharmacopoeia and ISO 10993-5, suggesting the very low cytotoxicity of the sensor. Moreover, it was found that the senor could be readily internalized by both HeLa and L929 cells and the sensor could be utilized to track fluoride level changes inside the cells.

In silico studies toward the recognition of fluoride ion by substituted borazines

The substituted borazines have been computationally investigated as new type of receptors for the recognition of fluoride ion. Fluorine, methyl and phenyl groups have been selected as electron-withdrawing, electron-releasing and aromatic substituents for the study employing DFT (B3LYP/6-311+G**) and ab initio (MP2/6-311+G**) levels of calculations. N-substituted borazines have shown higher fluoride ion affinity than their corresponding B-substituted borazines. In the case of fluorinated borazines, the binding affinity of fluoride is enhanced with the increasing number of substitutions. The F⁻ and Cl⁻ ions, generally, prefer to bind with the boron atom of substituted borazine rings, whereas, Br⁻ ion prefers to bind with NH hydrogens of the borazine receptor units. Phenyl derivatives of borazine also showed analogous behavior with halide anions. The binding affinities of halides with fluorinated and phenyl derivatives of borazine have been found to be much higher than the simple borazine receptor molecule. The NBO analyses performed for the complexation of F⁻ ion with fluorinated borazines suggest that the Lewis energy contribution in the total SCF energy enhanced with increasing the substitutions. However, in the case of methylated borazines, the delocalization energy is responsible for the stabilization of F⁻ ion complexes. The N-trifluoroborazine showed much higher fluoride ion affinity (30.9 kcal/mol) in aqueous phase than the simple borazine.

Molecular recognition: from solution science to nano/materials technology

In the 25 years since its Nobel Prize in chemistry, supramolecular chemistry based on molecular recognition has been paid much attention in scientific and technological fields. Nanotechnology and the related areas seek breakthrough methods of nanofabrication based on rational organization through assembly of constituent molecules. Advanced biochemistry, medical applications, and environmental and energy technologies also depend on the importance of specific interactions between molecules. In those current fields, molecular recognition is now being re-evaluated. In this review, we re-examine current trends in molecular recognition from the viewpoint of the surrounding media, that is (i) the solution phase for development of basic science and molecular design advances; (ii) at nano/materials interfaces for emerging technologies and applications. The first section of this review includes molecular recognition frontiers, receptor design based on combinatorial approaches, organic capsule receptors, metallo-capsule receptors, helical receptors, dendrimer receptors, and the future design of receptor architectures. The following section summarizes topics related to molecular recognition at interfaces including fundamentals of molecular recognition, sensing and detection, structure formation, molecular machines, molecular recognition involving polymers and related materials, and molecular recognition processes in nanostructured materials.

Borononucleotides as substrates/binders for human NMP kinases: enzymatic and spectroscopic evaluation

Borononucleotides are a family of natural nucleotide monophosphate analogues with a 5'-boronic acid function. As B-O-P linkages are known to be unstable in solution, we evaluated the ability of borononucleotides to be recognized by nucleoside monophosphate kinases and eventually foil the phosphorylation process. In this context, and with the idea of probing the influence of their size, shape, and flexibility, a library of borononucleotides were synthetized starting from the borononucleotide analogue of thymidine, which was shown to behave as a slow substrate of human TMP kinase. This study thus constitutes a good starting point for the development of new monophosphate mimics as potential substrates or ligands for NMP kinases.

Dynamic boronic acid-mediated autoligation of DNA strands

The single common feature of all biological systems is the dependence on self-assembly of molecular units to be morphed into well-defined functional architectures. Thanks to a dynamic equilibrium process, incorrect structural units are rejected with high levels of fidelity. The development of synthetic systems displaying similar attributes is an emerging field with wide applications from biotechnology to medicine. In this context, we developed a stimuli-responsive nucleic acid-based system relying on the reversible formation of cyclic boronate internucleosidic linkages. The dynamic assembly of this new borono-based helix has been accomplished through a DNA- and an RNA-templated autoligation process featuring a 5'-ended boronic acid oligonucleotide connecting to a 3'-ended ribonucleosidic oligonucleotide partner.