Catalyst-Enabled In Situ Linkage Reduction in Imine Covalent Organic Frameworks

New linkages for covalent organic frameworks (COFs) have been continuously pursued by chemists as they serve as the structure and property foundation for the materials. Developing new reaction types or modifying known linkages have been the only two methods to create new COF linkages. Herein, we report a novel strategy that uses H₃PO₃ as a bifunctional catalyst to achieve amine-linked COFs from readily available amine and aldehyde linkers. The acidic proton of H₃PO₃ catalyzes the imine framework formation, which is then in situ reduced to the amine COF by the reductive P-H moiety. The amine-linked COF outperforms its imine analogue in promoting Knoevenagel condensation because of the more basic sites and higher stability.

Organic molecular sieve membranes for chemical separations

Molecular separations that enable selective transport of target molecules from gas and liquid molecular mixtures, such as CO2 capture, olefin/paraffin separations, and organic solvent nanofiltration, represent the most energy sensitive and significant demands. Membranes are favored for molecular separations owing to the advantages of energy efficiency, simplicity, scalability, and small environmental footprint. A number of emerging microporous organic materials have displayed great potential as building blocks of molecular separation membranes, which not only integrate the rigid, engineered pore structures and desirable stability of inorganic molecular sieve membranes, but also exhibit a high degree of freedom to create chemically rich combinations/sequences. To gain a deep insight into the intrinsic connections and characteristics of these microporous organic material-based membranes, in this review, for the first time, we propose the concept of organic molecular sieve membranes (OMSMs) with a focus on the precise construction of membrane structures and efficient intensification of membrane processes. The platform chemistries, designing principles, and assembly methods for the precise construction of OMSMs are elaborated. Conventional mass transport mechanisms are analyzed based on the interactions between OMSMs and penetrate(s). Particularly, the 'STEM' guidelines of OMSMs are highlighted to guide the precise construction of OMSM structures and efficient intensification of OMSM processes. Emerging mass transport mechanisms are elucidated inspired by the phenomena and principles of the mass transport processes in the biological realm. The representative applications of OMSMs in gas and liquid molecular mixture separations are highlighted. The major challenges and brief perspectives for the fundamental science and practical applications of OMSMs are tentatively identified.

Probe metal binding mode of imine covalent organic frameworks: cycloiridation for (photo)catalytic hydrogen evolution from formate

Metalation of covalent organic frameworks (COFs) is a critical strategy to functionalize COFs for advanced applications yet largely relies on the pre-installed specific metal docking sites in the network, such as porphyrin, salen, 2,2'-bipyridine, etc. We show in this study that the imine linkage of simple imine-based COFs, one of the most popular COFs, readily chelate transition metal (Ir in this work) via cyclometalation, which has not been explored before. The iridacycle decorated COF exhibited more than 10-fold efficiency enhancement in (photo)catalytic hydrogen evolution from aqueous formate solution than its molecular counterpart under mild conditions. This work will inspire more functional cyclometallated COFs to be explored beyond catalysis considering the large imine COF library and the rich metallacycle chemistry.

Adsorption Performances of an Acid-stable 2D Covalent Organic Framework towards Palladium(II) in Simulated High-level Liquid Waste

An acid-stable 2D covalent organic framework (COF TpPa-1) was synthesized by a reversible Schiff-base reaction and the following irreversible enol-keto tautomerism. The adsorption behaviors of COF TpPa-1 towards Pd(II) in simulated high-level liquid waste (HLLW) were investigated under the effect of contact time, the concentration of nitric acid etc. The obtained experimental results supported that the utilization of this type of acid-stable COF in HLLW to recover metal ion was feasible.

N-Heterocyclic Carbene Functionalized Covalent Organic Framework for Transesterification of Glycerol with Dialkyl Carbonates

The development of a heterogeneous catalyst through the combination of novel carrier and powerful catalytic active sites is of particular interest. Herein, the successful integration of an N-Heterocyclic carbene (NHC) moiety into a covalent organic framework (COF) was achieved by coupling 4,4′,4′′,4′′′-(pyrene-1,3,6,8-tetrayl) tetraaniline (PyTTA) and equimolar 4,7-bis(4-formylphenyl)-1-methyl-1H-benzimidazole (IM) and 2′3′5′6′-tetrafluoro-[1,1′:4′,1′′-terphenyl]-4,4′-dicarbaldehyde (4F) followed by ionization with 1-bromobutane (C4H9Br) and then deprotonation upon addition of a base. The resulting material exhibited promising heterogeneous catalytic activity towards transesterification reaction of glycerol with dialkyl carbonate. Moreover, good recyclability granted no substantial loss of activity upon five cycles. Combination of COFs and NHCs might synergize their characteristics, thus providing more possibilities for creating new patterns of catalytic reactivity.

Amine-Linked Covalent Organic Frameworks as a Platform for Postsynthetic Structure Interconversion and Pore-Wall Modification

Covalent organic frameworks have emerged as a powerful synthetic platform for installing and interconverting dedicated molecular functions on a crystalline polymeric backbone with atomic precision. Here, we present a novel strategy to directly access amine-linked covalent organic frameworks, which serve as a scaffold enabling pore-wall modification and linkage-interconversion by new synthetic methods based on Leuckart-Wallach reduction with formic acid and ammonium formate. Frameworks connected entirely by secondary amine linkages, mixed amine/imine bonds, and partially formylated amine linkages are obtained in a single step from imine-linked frameworks or directly from corresponding linkers in a one-pot crystallization-reduction approach. The new, 2D amine-linked covalent organic frameworks, rPI-3-COF, rTTI-COF, and rPy1P-COF, are obtained with high crystallinity and large surface areas. Secondary amines, installed as reactive sites on the pore wall, enable further postsynthetic functionalization to access tailored covalent organic frameworks, with increased hydrolytic stability, as potential heterogeneous catalysts.

A Carboxyl-Functionalized Covalent Organic Framework Synthesized in a Deep Eutectic Solvent for Dye Adsorption

Instead of using organic solvents, a deep eutectic solvent (DES) composed of tetrabutylammonium bromide and imidazole (Bu₄ NBr/Im) was employed as a solvent for the first time to synthesize covalent organic frameworks (COFs). Due to the low vapor pressure of the Bu₄ NBr/Im-based DES, a new carboxyl-functionalized COF (TpPa-COOH) was synthesized under environmental pressure. The as-synthesized TpPa-COOH has open channels, and the DES can be removed completely from the pores. The dye adsorption performance of TpPa-COOH was examined for three organic dyes with similar molecular sizes: one anionic dye (eosin B, EB) and two cationic dyes (methylene blue, MB and safranine T, ST). TpPa-COOH showed an excellent selective adsorption effect on MB and ST. The electronegative keto form in TpPa-COOH might help to form electrostatic and π-π interactions between the π-stacking frameworks of TpPa-COOH and the positive plane MB and ST molecules. The adsorption isotherms of MB and ST on TpPa-COOH were further investigated in detail, and the equilibrium adsorption was well modeled by using a Langmuir isotherm model. Together with hydrogen bonding, TpPa-COOH showed higher adsorption capacity for ST than for MB (1135 vs. 410 mg g^-1 ). These results could provide a guidance for the green synthesis of adsorbents in removing organic dyes from wastewater.

Dehydrative Formation of Isosorbide from Sorbitol over Poly(ionic liquid)-Covalent Organic Framework Hybrids

In this study, the covalent bonding of linear poly(ionic liquid)s (PILs) with covalent organic frameworks (COFs) was accessed by copolymerization of a vinyl-decorated COF with 4-vinylbenzyl chloride, followed by quaternization with tertiary amines. The resultant PIL-COF composite by anchoring a proper content of vinyl sites on the COF-based comonomer retains the crystallinity and porosity, thereby facilitating access of the reactants to the catalytic active sites. As a proof of concept, the dehydrative transformation of sorbitol into isosorbide was selected as a benchmark reaction, whose rate improved significantly in the presence of PIL-COF-0.33 compared with those of individual components and the mesoporous PIL counterpart due to uniform pore sizes and flexible linear catalytic chains. In addition, the hybrids bearing a chemical cross-linkage between PILs and COFs are robust, and PIL-COF-0.33 can be recovered and reused for 10 runs without significant reactivity loss. These findings provide the basis for a novel design concept for achieving both efficient and stable IL catalysis.

MOF-in-COF molecular sieving membrane for selective hydrogen separation

Covalent organic frameworks (COFs) are promising materials for advanced molecular-separation membranes, but their wide nanometer-sized pores prevent selective gas separation through molecular sieving. Herein, we propose a MOF-in-COF concept for the confined growth of metal-organic framework (MOFs) inside a supported COF layer to prepare MOF-in-COF membranes. These membranes feature a unique MOF-in-COF micro/nanopore network, presumably due to the formation of MOFs as a pearl string-like chain of unit cells in the 1D channel of 2D COFs. The MOF-in-COF membranes exhibit an excellent hydrogen permeance (>3000 GPU) together with a significant enhancement of separation selectivity of hydrogen over other gases. The superior separation performance for H2/CO2 and H2/CH4 surpasses the Robeson upper bounds, benefiting from the synergy combining precise size sieving and fast molecular transport through the MOF-in-COF channels. The synthesis of different combinations of MOFs and COFs in robust MOF-in-COF membranes demonstrates the versatility of our design strategy.

Intrinsic proton conduction in 2D sulfonated covalent organic frameworks through a post-synthetic strategy

A 2D sulfonated COF showed intrinsic proton conductivity up to 10−3 at 25 °C and 100% relative humidity and high conductivity up to 10−2 S cm−1 at 70 °C and 100% RH.

Current Research Trends and Perspectives on Solid-State Nanomaterials in Hydrogen Storage

Hydrogen energy, with environment amicable, renewable, efficiency, and cost-effective advantages, is the future mainstream substitution of fossil-based fuel. However, the extremely low volumetric density gives rise to the main challenge in hydrogen storage, and therefore, exploring effective storage techniques is key hurdles that need to be crossed to accomplish the sustainable hydrogen economy. Hydrogen physically or chemically stored into nanomaterials in the solid-state is a desirable prospect for effective large-scale hydrogen storage, which has exhibited great potentials for applications in both reversible onboard storage and regenerable off-board storage applications. Its attractive points include safe, compact, light, reversibility, and efficiently produce sufficient pure hydrogen fuel under the mild condition. This review comprehensively gathers the state-of-art solid-state hydrogen storage technologies using nanostructured materials, involving nanoporous carbon materials, metal-organic frameworks, covalent organic frameworks, porous aromatic frameworks, nanoporous organic polymers, and nanoscale hydrides. It describes significant advances achieved so far, and main barriers need to be surmounted to approach practical applications, as well as offers a perspective for sustainable energy research.

Recent insight into functional crystalline porous frameworks for cancer photodynamic therapy

We summarize and illustrate the recent developments of MOF- and COF-based nanomedicines for PDT and its combined antitumor treatments. Furthermore, major challenges and future development prospects in this field are also discussed.

Emerging new-generation hybrids based on covalent organic frameworks for industrial applications

This review highlights the advancement of COF hybrid-based materials for diverse industrial applications.

A facile cucurbit[8]uril-based porous assembly: utilization in the adsorption of drugs and their controlled release

Cucurbit[n]urils (Q[n]s) are essential members of the supramolecular organic framework family owing to their distinct structure.

A fluorescent porous covalent-organic polymer (COP-3) for highly selective and sensitive detection of Fe3+ in aqueous solution

A novel COP exhibits excellent performance in sensing Fe³⁺ at the ppb level, with high cyclicity and anti-interfere ability.

Boronic-acid-derived covalent organic frameworks: from synthesis to applications

Modular, well-defined, and robust hierarchical functional materials are targets of numerous synthesis endeavors.

Covalent organic frameworks (COFs) for electrochemical applications

Covalent organic frameworks are a class of extended crystalline organic materials that possess unique architectures with high surface areas and tuneable pore sizes. Since the first discovery of the topological frameworks in 2005, COFs have been applied as promising materials in diverse areas such as separation and purification, sensing or catalysis. Considering the need for renewable and clean energy production, many research efforts have recently focused on the application of porous materials for electrochemical energy storage and conversion. In this respect, considerable efforts have been devoted to the design and synthesis of COF-based materials for electrochemical applications, including electrodes and membranes for fuel cells, supercapacitors and batteries. This review article highlights the design principles and strategies for the synthesis of COFs with a special focus on their potential for electrochemical applications. Recently suggested hybrid COF materials or COFs with hierarchical porosity will be discussed, which can alleviate the most challenging drawback of COFs for these applications. Finally, the major challenges and future trends of COF materials in electrochemical applications are outlined.

Construction of covalent organic framework with unique double-ring pore for size-matching adsorption of uranium

The separation and recovery of key nuclides such as uranium and plutonium from effluents related to nuclear industry is of great significance for alleviating the shortage of nuclear energy resources and protecting the environment and human health. However, the high temperature, strong acidity and radioactivity of the nuclear effluents pose a severe challenge to the separation materials used in such conditions. The diversity of structure, flexibility of design, and excellent physicochemical stability of covalent organic framework materials (COFs) provide the possibility for the directional design and preparation of adsorbents for use under harsh conditions. Herein, three COFs with similar structure, different pore sizes and connecting modules were synthesized. The ingenious structure predesign enables Dp-COF to have three carboxyl groups oriented toward the pore center and laid out in appropriate spatial positions, which builds hydrogen-bonding bridges between carboxycarbonyl and hydroxyl groups, and thus constructs for the first time a unique COF material with a double-ring pore. The inner pore size of the "double-ring" is slightly larger than the diameter of uranyl hydrate, which leads to a size-matching adsorption of uranium by Dp-COF, thus greatly reducing the effect of protonation. Even in the simulated spent fuel reprocessing liquid with pH = 1.0, the adsorption capacity of Dp-COF for uranium can reach 66.3 mg g^-1, and the adsorption capacity reaches 317.3 mg g^-1 at pH = 4.5, which is very rare among the reported COFs. More excitingly, the removal rate for uranium reaches up to an unprecedented 99.8% due to the size-matching effect, more than any analogous adsorbents. This study not only proposes new ideas for the design and regulation of the microscopic configuration of COF materials, but also provides an alternative approach for the preparation of efficient uranium adsorbents.

Beyond Frameworks: Structuring Reticular Materials across Nano-, Meso-, and Bulk Regimes

Reticular materials are of high interest for diverse applications, ranging from catalysis and separation to gas storage and drug delivery. These open, extended frameworks can be tailored to the intended application through crystal-structure design. Implementing these materials in application settings, however, requires structuring beyond their lattices, to interface the functionality at the molecular level effectively with the macroscopic world. To overcome this barrier, efforts in expressing structural control across molecular, nano-, meso-, and bulk regimes is the essential next step. In this Review, we give an overview of recent advances in using self-assembly as well as externally controlled tools to manufacture reticular materials over all the length scales. We predict that major research advances in deploying these two approaches will facilitate the use of reticular materials in addressing major needs of society.

Diverse crystal size effects in covalent organic frameworks

Crystal size effect is of vital importance in materials science by exerting significant influence on various properties of materials and furthermore their functions. Crystal size effect of covalent organic frameworks (COFs) has never been reported because their controllable synthesis is difficult, despite their promising properties have been exhibited in many aspects. Here, we report the diverse crystal size effects of two representative COFs based on the successful realization of crystal-size-controlled synthesis. For LZU-111 with rigid spiral channels, size effect reflects in pore surface area by influencing the pore integrity, while for flexible COF-300 with straight channels, crystal size controls structural flexibility by altering the number of repeating units, which eventually changes sorption selectivity. With the understanding and insight of the structure-property correlation not only at microscale but also at mesoscale for COFs, this research will push the COF field step forward to a significant advancement in practical applications.

Crystal size effects are of vital importance to understand various properties and functions of a material but have not been reported for Covalent Organic Frameworks (COFs). Here, the authors report a crystal-size-controlled synthesis of two COFs and look into different crystal size effects.

Microporous framework membranes for precise molecule/ion separations

Microporous framework membranes such as metal-organic framework (MOF) membranes and covalent organic framework (COF) membranes are constructed by the controlled growth of small building blocks with large porosity and permanent well-defined micropore structures, which can overcome the ubiquitous tradeoff between membrane permeability and selectivity; they hold great promise for the enormous challenging separations in energy and environment fields. Therefore, microporous framework membranes are endowed with great expectations as next-generation membranes, and have evolved into a booming research field. Numerous novel membrane materials, versatile manipulation strategies of membrane structures, and fascinating applications have erupted in the last five years. First, this review summarizes and categorizes the microporous framework membranes with pore sizes lower than 2 nm based on their chemistry: inorganic microporous framework membranes, organic-inorganic microporous framework membranes, and organic microporous framework membranes, where the chemistry, fabrications, and differences among these membranes have been highlighted. Special attention is paid to the membrane structures and their corresponding modifications, including pore architecture, intercrystalline grain boundary, as well as their diverse control strategies. Then, the separation mechanisms of membranes are covered, such as diffusion-selectivity separation, adsorption-selectivity separation, and synergetic adsorption-diffusion-selectivity separation. Meanwhile, intricate membrane design to realize synergistic separation and some emerging mechanisms are highlighted. Finally, the applications of microporous framework membranes for precise gas separation, liquid molecule separation, and ion sieving are summarized. The remaining challenges and future perspectives in this field are discussed. This timely review may provide genuine guidance on the manipulation of membrane structures and inspire creative designs of novel membranes, promoting the sustainable development and steadily increasing prosperity of this field.

Electroactive Covalent Organic Frameworks: Design, Synthesis, and Applications

Covalent organic frameworks (COFs) are an emerging class of crystalline porous polymers with tailorable compositions, porosities, functionalities, and intrinsic chemical stability. The incorporation of electroactive moieties in the structure transforms COFs into electroactive materials with great potential for energy-related applications. Herein, the recent advances in the design and use of electroactive COFs as capacitors, batteries, conductors, fuel cells, water-splitting, and electrocatalysis are addressed. Their remarkable performance is discussed and compared with other porous materials; hence, perspectives in the development of electroactive COFs are presented.

Computational Selection of High-Performing Covalent Organic Frameworks for Adsorption and Membrane-Based CO2/H2 Separation

Covalent organic frameworks (COFs) have high potential in gas separation technologies because of their porous structures, large surface areas, and good stabilities. The number of synthesized COFs already reached several hundreds, but only a handful of materials were tested as adsorbents and/or membranes. We used a high-throughput computational screening approach to uncover adsorption-based and membrane-based CO₂/H₂ separation potentials of 288 COFs, representing the highest number of experimentally synthesized COFs studied to date for precombustion CO₂ capture. Grand canonical Monte Carlo (GCMC) simulations were performed to assess CO₂/H₂ mixture separation performances of COFs for five different cyclic adsorption processes: pressure swing adsorption, vacuum swing adsorption, temperature swing adsorption (TSA), pressure-temperature swing adsorption (PTSA), and vacuum-temperature swing adsorption (VTSA). The results showed that many COFs outperform traditional zeolites in terms of CO₂ selectivities and working capacities and PTSA is the best process leading to the highest adsorbent performance scores. Combining GCMC and molecular dynamics (MD) simulations, CO₂ and H₂ permeabilities and selectivities of COF membranes were calculated. The majority of COF membranes surpass Robeson's upper bound because of their higher H₂ permeabilities compared to polymers, indicating that the usage of COFs has enormous potential to replace current materials in membrane-based H₂/CO₂ separation processes. Performance analysis based on the structural properties showed that COFs with narrow pores [the largest cavity diameter (LCD) < 15 Å] and low porosities (ϕ < 0.75) are the top adsorbents for selective separation of CO₂ from H₂, whereas materials with large pores (LCD > 20 Å) and high porosities (ϕ > 0.85) are generally the best COF membranes for selective separation of H₂ from CO₂. These results will help to speed up the engineering of new COFs with desired structural properties to achieve high-performance CO₂/H₂ separations.

Single-Crystal-to-Single-Crystal Installation of Ln4 (OH)4 Cubanes in an Anionic Metallosupramolecular Framework

Postsynthetic installation of lanthanide cubanes into a metallosupramolecular framework via a single-crystal-to-single-crystal (SCSC) transformation is presented. Soaking single crystals of K₆ [Rh₄ Zn₄ O(l-cys)₁₂ ] (K₆ [1]; l-H₂ cys=l-cysteine) in a water/ethanol solution containing Ln(OAc)₃ (Ln³⁺ =lanthanide ion) results in the exchange of K⁺ by Ln³⁺ with retention of the single crystallinity, producing Ln₂ [1] (2_Ln ) and Ln_0.33 [Ln₄ (OH)₄ (OAc)₃ (H₂ O)₇ ][1] (3_Ln ) for early and late lanthanides, respectively. While the Ln³⁺ ions in 2_Ln exist as disordered aqua species, those in 3_Ln form ordered hydroxide-bridged cubane clusters that connect [1]^6- anions in a 3D metal-organic framework through coordination bonds with carboxylate groups. This study shows the utility of an anionic metallosupramolecular framework with carboxylate groups for the creation of a series of metal cubanes that have great potential for various applications, such as magnetic materials and heterogeneous catalysts.

Revival of Zeolite-Templated Nanocarbon Materials: Recent Advances in Energy Storage and Conversion

Nanocarbon materials represent one of the hottest topics in physics, chemistry, and materials science. Preparation of nanocarbon materials by zeolite templates has been developing for more than 20 years. In recent years, novel structures and properties of zeolite-templated nanocarbons have been evolving and new applications are emerging in the realm of energy storage and conversion. Here, recent progress of zeolite-templated nanocarbons in advanced synthetic techniques, emerging properties, and novel applications is summarized: i) thanks to the diversity of zeolites, the structures of the corresponding nanocarbons are multitudinous; ii) by various synthetic techniques, novel properties of zeolite-templated nanocarbons can be achieved, such as hierarchical porosity, heteroatom doping, and nanoparticle loading capacity; iii) the applications of zeolite-templated nanocarbons are also evolving from traditional gas/vapor adsorption to advanced energy storage techniques including Li-ion batteries, Li-S batteries, fuel cells, metal-O2 batteries, etc. Finally, a perspective is provided to forecast the future development of zeolite-templated nanocarbon materials.

Structural Approaches to Control Interlayer Interactions in 2D Covalent Organic Frameworks

The ability to design and synthesize monomers can affect fundamental aspects in 2D covalent organic frameworks, such as dimensionality, topology, and pore size. Besides this, the structure of the monomers can also affect interlayer interactions, which provide an additional means to influence crystallinity, layer arrangement, interlayer distances, and exfoliability. Herein, some of the effects that the structure of monomers can have on the interlayer interactions in 2D covalent organic frameworks and related materials are illustrated.

Sequential pore wall functionalization in covalent organic frameworks and application to stable camptothecin delivery systems

Post-synthetic modification of covalent organic frameworks (COFs) is strongly demanded in order to provide additional functionalities to their structures. However, the introduction of functional groups during the synthesis of two dimensional COFs (2D COFs) is highly discouraged, as they can interfere with the π-π stacking forces, compromising framework integrity. Here, we show that direct incorporation of nucleophyllic groups (e.g., primary amines) on pore wall during the synthesis of a 2D-COF (COF-5) is possible by sequential substitution of original monomers. Subsequent bonding of the antitumor drug camptothecin results in a stable hydrophobic drug delivery system. Water adsorption isotherms modelling indicates that the insertion of CPT ligand in the framework promotes a hydrophobic effect that protects a region of COF chain from boronate ester hydrolysis and resulting degradation, which is also proven by stability testing in physiological conditions. Furthermore, this hydrophobic nature favors cell internalization kinetics by promoting interactions with the lipophilic cell membrane. To the best of our knowledge, this is the first case of a stable drug delivery system based on covalently conjugated COFs.

Facile extraction and determination of organophosphorus pesticides in vegetables via magnetic functionalized covalent organic framework nanocomposites

Facile enrichment and determination of trace organophosphorus pesticides (OPPs) in foods has been a constantly pursuing goal in food safety field. Herein, Zr⁴⁺-immobilized covalent organic frameworks (Fe₃O₄@COF@Zr⁴⁺) have been first constructed and utilized as the powerful adsorbents for magnetic solid-phase extraction (MSPE) of OPPs. Owing to the π-π stacking interaction, hydrogen bonding and Zr⁴⁺-phosphate coordination reaction, the composites exhibited excellent selectivity and superior affinity to OPPs. Under optimized conditions, the proposed MSPE method coupled with GC-FPD showed good linearity (R² ≥ 0.9990) and yielded low limits of detection (0.7-3.0 μg kg^-1) for OPPs. Moreover, the developed method was successfully employed for the quantitation of OPPs in spiked vegetable samples and obtained satisfactory recoveries in the range of 87-121% with the relative standard deviations (RSDs) ≤ 8.9%. These results demonstrated that the prepared nanoparticles hold unique advantages for trace OPPs analysis in foodstuffs.

Synthesis of Vinylene-Linked Covalent Organic Frameworks from Acetonitrile: Combining Cyclotrimerization and Aldol Condensation in One Pot

Combining two or more consecutive reactions in one pot is a common approach for process development, as such a method involves cheap starting materials and allows in situ generation of a reactive intermediate, to undergo further reaction, without isolation. Herein, we report the synthesis of a vinylene-linked (-CH═CH-) covalent organic framework, COF-701, directly from acetonitrile, a cheap commodity solvent, by combining/telescoping two consecutive reactions-cyclotrimerization of nitrile and subsequent aldol condensation with aldehydes-in one pot. Acetonitrile is trimerized to generate protonated 2,4,6-trimethyl-s-triazine tautomers in situ, which undergo Aldol condensation with 4,4'-biphenyldicarbaldehyde in one pot to form crystalline COF-701. COF-701 is obtained as a polycrystalline powder and possesses permanent microporosity and a BET surface area (SA_BET) of 736 m²·g^-1. This strategy can be further extended to generate other porous vinylene-linked frameworks.

Applications of Dynamic Covalent Chemistry Concept towards Tailored Covalent Organic Framework Nanomaterials: A Review

Covalent organic frameworks (COFs) are a rapidly developing class of materials that has been of immense research interest during the last ten years. Numerous reviews have been devoted to summarizing the synthesis and applications of COFs. However, the underlying dynamic covalent chemistry (DCC), which is the foundation of COFs synthesis, has never been systematically reviewed in this context. Dynamic covalent chemistry is the practice of using thermodynamic equilibriums to molecular assemblies. This Critical Review will cover the state-of-the-art use of DCC to both synthesize COFs and expand the applications of COFs. Five synthetic strategies for COF synthesis are rationalized, namely: modulation, mixed linker/linkage, sub-stoichiometric reaction, framework isomerism, and linker exchange, which highlight the dynamic covalent chemistry to regulate the growth and to modify the properties of COFs. Furthermore, the challenges in these approaches and potential future perspectives in the field of COF chemistry are also provided.