Uracil-DNA glycosylase-DNA substrate and product structures: conformational strain promotes catalytic efficiency by coupled stereoelectronic effects

Fidelity of uracil-initiated base excision DNA repair in DNA polymerase beta-proficient and -deficient mouse embryonic fibroblast cell extracts

Uracil-initiated base excision DNA repair was conducted using homozygous mouse embryonic fibroblast DNA polymerase beta (+/+) and (-/-) cells to determine the error frequency and mutational specificity associated with the completed repair process. Form I DNA substrates were constructed with site-specific uracil residues at U.A, U.G, and U.T targets contained within the lacZalpha gene of M13mp2 DNA. Efficient repair was observed in both DNA polymerase beta (+/+) and (-/-) cell-free extracts. Repair was largely dependent on uracil-DNA glycosylase activity because addition of the PBS-2 uracil-DNA glycosylase inhibitor (Ugi) protein reduced ( approximately 88%) the initial rate of repair in both types of cell-free extracts. In each case, the DNA repair patch size was primarily distributed between 1 and 8 nucleotides in length with 1 nucleotide repair patch constituting approximately 20% of the repair events. Addition of p21 peptide or protein to DNA polymerase beta (+/+) cell-free extracts increased the frequency of short-patch (1 nucleotide) repair by approximately 2-fold. The base substitution reversion frequency associated with uracil-DNA repair of M13mp2op14 (U.T) DNA was determined to be 5.7-7.2 x 10(-4) when using DNA polymerase beta (+/+) and (-/-) cell-free extracts. In these two cases, the error frequency was very similar, but the mutational spectrum was noticeably different. The presence or absence of Ugi did not dramatically influence either the error rate or mutational specificity. In contrast, the combination of Ugi and p21 protein promoted an increase in the mutation frequency associated with repair of M13mp2 (U.G) DNA. Examination of the mutational spectra generated by a forward mutation assay revealed that errors in DNA repair synthesis occurred predominantly at the position of the U.G target and frequently involved a 1-base deletion or incorporation of dTMP.

Uracil-DNA glycosylase acts by substrate autocatalysis

In humans, uracil appears in DNA at the rate of several hundred bases per cell each day as a result of misincorporation of deoxyuridine (dU) or deamination of cytosine. Four enzymes that catalyse the hydrolysis of the glycosylic bond of dU in DNA to yield an apyridiminic site as the first step in base excision repair have been identified in the human genome. The most efficient and well characterized of these uracil-DNA glycosylases is UDG (also known as UNG and present in almost all known organisms), which excises U from single- or double-stranded DNA and is associated with DNA replication forks. We used a hybrid quantum-mechanical/molecular-mechanical (QM/MM) approach to determine the mechanism of catalysis by UDG. In contrast to the concerted associative mechanism proposed initially, we show here that the reaction proceeds in a stepwise dissociative manner. Cleavage of the glycosylic bond yields an intermediate comprising an oxocarbenium cation and a uracilate anion. Subsequent attack by a water molecule and transfer of a proton to D145 result in the products. Surprisingly, the primary contribution to lowering the activation energy comes from the substrate, rather than from the enzyme. This 'autocatalysis' derives from the burial and positioning of four phosphate groups that stabilize the rate-determining transition state. The importance of these phosphates explains the residual activity observed for mutants that lack key residues. A corresponding catalytic mechanism could apply to the DNA glycosylases TDG and SMUG1, which belong to the same structural superfamily as UDG.

Transition state variation in enzymatic reactions

Experimental analysis of enzymatic transition states by kinetic isotope effect methods has established geometric variation in related transition state structures. Differences are apparent in development of the reaction coordinate, in solvolytic transition states relative to those in enzymatic catalytic sites, in the stereochemistry of related substrates at the transition state, and in reactions catalyzed by related enzymes.

A kinetic analysis of substrate recognition by uracil-DNA glycosylase from herpes simplex virus type 1

Uracil-DNA glycosylase (UDG) is responsible for the removal of uracil from DNA. It has previously been demonstrated that UDG exhibits some sequence dependence in its activity, although this has not been well characterised. This study has investigated the sequence-dependent activity of UDG from herpes simplex virus type-1 (HSV-1). A more detailed analysis has been possible by using both kinetic and binding assays with a variety of different oligonucleotide substrates. The target uracil has been placed in substrates with either A-T-rich or G-C-rich flanking sequences and analyses have been performed on both the single- and double-stranded forms of each substrate. In the latter the uracil has been placed in both a U.A base pair and a U.G mismatch. It is observed that the sequences flanking the target uracil have a greater effect on UDG activity than the partner base of the uracil. Furthermore, the sequence context effects extend to single-stranded DNA. Systematic examination of the kinetics and binding of UDG with these different substrates has enabled us to examine the origin of the sequence preferences. We conclude that the damage recognition step in the HSV-1 UDG reaction pathway is modulated by local DNA sequence.

AdoMet-dependent methylation, DNA methyltransferases and base flipping

Twenty AdoMet-dependent methyltransferases (MTases) have been characterized structurally by X-ray crystallography and NMR. These include seven DNA MTases, five RNA MTases, four protein MTases and four small molecule MTases acting on the carbon, oxygen or nitrogen atoms of their substrates. The MTases share a common core structure of a mixed seven-stranded beta-sheet (6 downward arrow 7 upward arrow 5 downward arrow 4 downward arrow 1 downward arrow 2 downward arrow 3 downward arrow) referred to as an 'AdoMet-dependent MTase fold', with the exception of a protein arginine MTase which contains a compact consensus fold lacking the antiparallel hairpin strands (6 downward arrow 7 upward arrow). The consensus fold is useful to identify hypothetical MTases during structural proteomics efforts on unannotated proteins. The same core structure works for very different classes of MTase including those that act on substrates differing in size from small molecules (catechol or glycine) to macromolecules (DNA, RNA and protein). DNA MTases use a 'base flipping' mechanism to deliver a specific base within a DNA molecule into a typically concave catalytic pocket. Base flipping involves rotation of backbone bonds in double-stranded DNA to expose an out-of-stack nucleotide, which can then be a substrate for an enzyme-catalyzed chemical reaction. The phenomenon is fully established for DNA MTases and for DNA base excision repair enzymes, and is likely to prove general for enzymes that require access to unpaired, mismatched or damaged nucleotides within base-paired regions in DNA and RNA. Several newly discovered MTase families in eukaryotes (DNA 5mC MTases and protein arginine and lysine MTases) offer new challenges in the MTase field.

The role of leucine 191 of Escherichia coli uracil DNA glycosylase in the formation of a highly stable complex with the substrate mimic, ugi, and in uracil excision from the synthetic substrates

Uracil DNA glycosylase (UDG), a highly conserved DNA repair enzyme, initiates the uracil excision repair pathway. Ugi, a bacteriophage-encoded peptide, potently inhibits UDGs by serving as a remarkable substrate mimic. Structure determination of UDGs has identified regions important for the exquisite specificity in the detection and removal of uracils from DNA and in their interaction with Ugi. In this study, we carried out mutational analysis of the Escherichia coli UDG at Leu191 within the 187HPSPLS192 motif (DNA intercalation loop). We show that with the decrease in side chain length at position 191, the stability of the UDG-Ugi complexes regresses. Further, while the L191V and L191F mutants were as efficient as the wild type protein, the L191A and L191G mutants retained only 10 and 1% of the enzymatic activity, respectively. Importantly, however, substitution of Leu191 with smaller side chains had no effect on the relative efficiencies of uracil excision from the single-stranded and a corresponding double-stranded substrate. Our results suggest that leucine within the HPSPLS motif is crucial for the uracil excision activity of UDG, and it contributes to the formation of a physiologically irreversible complex with Ugi. We also envisage a role for Leu191 in stabilizing the productive enzyme-substrate complex.

Structural biochemistry of a type 2 RNase H: RNA primer recognition and removal during DNA replication

DNA replication and cellular survival requires efficient removal of RNA primers during lagging strand DNA synthesis. In eukaryotes, RNA primer removal is initiated by type 2 RNase H, which specifically cleaves the RNA portion of an RNA-DNA/DNA hybrid duplex. This conserved type 2 RNase H family of replicative enzymes shares little sequence similarity with the well-characterized prokaryotic type 1 RNase H enzymes, yet both possess similar enzymatic properties. Crystal structures and structure-based mutational analysis of RNase HII from Archaeoglobus fulgidus, both with and without a bound metal ion, identify the active site for type 2 RNase H enzymes that provides the general nuclease activity necessary for catalysis. The two-domain architecture of type 2 RNase H creates a positively charged binding groove and links the unique C-terminal helix-loop-helix cap domain to the active site catalytic domain. This architectural arrangement apparently couples directional A-form duplex binding, by a hydrogen-bonding Arg-Lys phosphate ruler motif, to substrate-discrimination, by a tyrosine finger motif, thereby providing substrate-specific catalytic activity. Combined kinetic and mutational analyses of structurally implicated substrate binding residues validate this binding mode. These structural and mutational results together suggest a molecular mechanism for type 2 RNase H enzymes for the specific recognition and cleavage of RNA in the RNA-DNA junction within hybrid duplexes, which reconciles the broad substrate binding affinity with the catalytic specificity observed in biochemical assays. In combination with a recent independent structural analysis, these results furthermore identify testable molecular hypotheses for the activity and function of the type 2 RNase H family of enzymes, including structural complementarity, substrate-mediated conformational changes and coordination with subsequent FEN-1 activity.

Recent progress in the biology, chemistry and structural biology of DNA glycosylases

Since the discovery in 1974 of uracil DNA glycosylase (UDG), the first member of the family of enzymes involved in base excision repair (BER), considerable progress has been made in the understanding of DNA glycosylases, the polypeptides that remove damaged or mispaired DNA bases from DNA. We also know the enzymes that act downstream of the glycosylases, in the processing of abasic sites, in gap filling and in DNA ligation. This article covers the most recent developments in our understanding of BER, with particular emphasis on the mechanistic aspects of this process, which have been made possible by the elucidation of the crystal structures of several glycosylases in complex with their respective substrates, substrate analogues and products. The biological importance of individual BER pathways is also being appreciated through the inactivation of key BER genes in knockout mouse models.

The mechanism of DNA repair by uracil-DNA glycosylase: studies using nucleotide analogues

2',4'-Dideoxy-4'-methyleneuridine incorporated into oligodeoxynucleotides forms regular B-DNA duplexes as shown by Tm and CD measurements. Such oligomers are not cleaved by the DNA repair enzyme, UDG, which cleaves the glycosylic bond in dU but not in dT nor in dC nucleosides in single stranded and double stranded DNA. Differential binding of oligomers containing carbadU, 4'-thiodU, and dU residues to wild type and mutant UDG proteins identify an essential role for the furanose 4'-oxygen in recognition and cleavage of dU residues in DNA.

Lessons learned from structural results on uracil-DNA glycosylase

Uracil-DNA glycosylase (UDG) functions as a sentry guarding against uracil in DNA. UDG initiates DNA base excision repair (BER) by hydrolyzing the uracil base from the deoxyribose. As one of the best studied DNA glycosylases, a coherent and complete functional mechanism is emerging that combines structural and biochemical results. This functional mechanism addresses the detection of uracil bases within a vast excess of normal DNA, the features of the enzyme that drive catalysis, and coordination of UDG with later steps of BER while preventing the release of toxic intermediates. Many of the solutions that UDG has evolved to overcome the challenges of policing the genome are shared by other DNA glycosylases and DNA repair enzymes, and thus appear to be general.

Base excision repair of DNA in mammalian cells

Base excision repair (BER) of DNA corrects a number of spontaneous and environmentally induced genotoxic or miscoding base lesions in a process initiated by DNA glycosylases. An AP endonuclease cleaves at the 5' side of the abasic site and the repair process is subsequently completed via either short patch repair or long patch repair, which largely require different proteins. As one example, the UNG gene encodes both nuclear (UNG2) and mitochondrial (UNG1) uracil DNA glycosylase and prevents accumulation of uracil in the genome. BER is likely to have a major role in preserving the integrity of DNA during evolution and may prevent cancer.