Increased Silver Activity for Direct Propylene Epoxidation via Subnanometer Size Effects

Magnetically Hollow Pt Nanocages with Ultrathin Walls as a Highly Integrated Nanoreactor for Catalytic Transfer Hydrogenation Reaction

Fabricating efficient and stable nanocatalysts for chemoselective hydrogenation of nitroaromatics is highly desirable because the amines hold tremendous promise for the synthesis of nitrogen containing chemicals. Here, a highly reactive and stable porous carbon nitride encapsulated magnetically hollow platinum nanocage is developed with subnanometer thick walls (Fe3O4@snPt@PCN) for this transformation. This well-controlled nanoreactor is prepared via the following procedures: the preparation of core template, the deposition of platinum nanocage with subnanometer thick walls, oxidative etching, and calcination. This highly integrated catalyst demonstrates excellent performance for the catalytic transfer hydrogenation of various nitroaromatics and the reaction can reach >99% conversion and >99% selectivity. With the ultrathin wall structure, the atom utilization of platinum atoms is highly efficient. The X-ray photoelectron spectroscopy results indicate that partial electrons transfer from the iron oxides to Pt nanowalls, and this increases the electron density of snPt nanoparticles, thus promoting the catalytic activity for the transfer hydrogenation of nitroaromatics. For the reduction of 4-nitrophenol, the reaction rate constant K app is 0.23 min-1 and the turnover frequency (TOF) is up to 3062 h-1. Additional reaction results illustrate that this magnetic nanoreactor can be reused more than eight times and it is a promising catalytic nanoplatform in heterogeneous catalysis.

Rapid formation of small mixed-valence luminescent silver clusters via cation-coupled electron-transfer in a redox-active porous ionic crystal based on dodecamolybdophosphate

Redox-active porous ionic crystals based on polyoxometalate (POM) were utilized to form and stabilize small mixed-valence luminescent silver clusters via cation-coupled electron-transfer (CCET) reactions. Reduction-induced ion-exchange between Cs+ and Ag+via CCET took less than 1 min to complete and consisted of two steps: electron transfer from reduced POM to Ag+ and the subsequent formation of a silver cluster, and diffusion of the silver cluster and exchange with Cs+. Notably, the simple ion-exchange took more than 24 h. The compound containing the silver cluster showed high affinity toward unsaturated hydrocarbon guests.

Cascade anchoring strategy for general mass production of high-loading single-atomic metal-nitrogen catalysts

Although single-atomically dispersed metal-N_x on carbon support (M-NC) has great potential in heterogeneous catalysis, the scalable synthesis of such single-atom catalysts (SACs) with high-loading metal-N_x is greatly challenging since the loading and single-atomic dispersion have to be balanced at high temperature for forming metal-N_x. Herein, we develop a general cascade anchoring strategy for the mass production of a series of M-NC SACs with a metal loading up to 12.1 wt%. Systematic investigation reveals that the chelation of metal ions, physical isolation of chelate complex upon high loading, and the binding with N-species at elevated temperature are essential to achieving high-loading M-NC SACs. As a demonstration, high-loading Fe-NC SAC shows superior electrocatalytic performance for O₂ reduction and Ni-NC SAC exhibits high electrocatalytic activity for CO₂ reduction. The strategy paves a universal way to produce stable M-NC SAC with high-density metal-N_x sites for diverse high-performance applications.

Although single atom catalysts (SACs) with high-loading metal-Nx have great potential in heterogeneous catalysis, their scalable synthesis remains challenging. Here, the authors develop a general cascade anchoring strategy for the mass production of a series of metal-Nx SACs with a metal loading up to 12.1 wt%.

Nanoassemblies of ultrasmall clusters with remarkable activity in carbon dioxide conversion into C1 fuels

Cu nanoassemblies formed transiently during reaction from size-selected subnanometer Cu4 clusters supported on amorphous OH-terminated alumina convert CO2 into methanol and hydrocarbons under near-atmospheric pressure at rates considerably higher than those of individually standing Cu4 clusters. An in situ characterization reveals that the clusters self-assemble into 2D nanoassemblies at higher temperatures which then disintegrate upon cooling down to room temperature. DFT calculations postulate a formation mechanism of these nanoassemblies by hydrogen-bond bridges between the clusters and H2O molecules, which keep the building blocks together while preventing their coalescence.

Subnanometer cobalt oxide clusters as selective low temperature oxidative dehydrogenation catalysts

The discovery of more efficient, economical, and selective catalysts for oxidative dehydrogenation is of immense economic importance. However, the temperatures required for this reaction are typically high, often exceeding 400 °C. Herein, we report the discovery of subnanometer sized cobalt oxide clusters for oxidative dehydrogenation of cyclohexane that are active at lower temperatures than reported catalysts, while they can also eliminate the combustion channel. These results found for the two cluster sizes suggest other subnanometer size (CoO)_x clusters will also be active at low temperatures. The high activity of the cobalt clusters can be understood on the basis of density functional studies that reveal highly active under-coordinated cobalt atoms in the clusters and show that the oxidized nature of the clusters substantially decreases the binding energy of the cyclohexene species which desorb from the cluster at low temperature.

Current oxidative dehydrogenation processes are based on petroleum cracking that is indirect, environmentally unfriendly, and energy intensive. Here, the authors discover that subnanometer sized cobalt oxide clusters are active for oxidative dehydrogenation of cyclohexane at lower temperatures than reported catalysts.

Hydrogen Activation by Silica-Supported Metal Ion Catalysts: Catalytic Properties of Metals and Performance of DFT Functionals

Single-site heterogeneous catalysts (SSHC) have received increasing attention due to their well-defined active sites and potentially high specific activity. Detailed computational studies were carried out on a set of potential SSHC's, i.e., silica-supported metal ions, to investigate the reactivity of these catalysts with H₂ as well as to evaluate the performance of density functional theory (DFT) methods in conjunction with triple-ζ quality basis sets (i.e., cc-pVTZ) on reaction energetics. The ions considered include 4d and 5d metals as well as several post-transition metal ions. A representative cluster model of silica is used to calculate reaction free energies of the metal hydride formation that results from the heterolytic cleavage of H₂ on the M-O bond. The hydride formation free energy is previously shown to be strongly correlated with the catalytic activity of such catalysts for alkene hydrogenation. ONIOM calculations (CCSD(T)//MP2) are used to assess the accuracy and reliability of the MP2 results and it is found that MP2 is a suitable level of theory for gauging the performance of DFT functionals. The performance of various DFT functionals is assessed relative to MP2 results and it is found that the wB97xd and PBE0 functionals have the lowest standard deviation (STD) value while the MN12SX and PBE functionals have the lowest mean absolute deviation (MAD) values. The B3LYP functional is shown to have similar MAD and STD values as the top performing functionals. Potential active SSHC's for exergonic hydrogen activation predicted in this study include mostly late and post transition metal ions, i.e., Au³⁺, Pd²⁺, Pt⁴⁺, Pd⁴⁺, Ir⁴⁺, Hg²⁺, Rh³⁺, Pb⁴⁺, Tl³⁺, In³⁺, Ir³⁺, Os⁴⁺, Cd²⁺, Ru²⁺, and Ga³⁺. This study provides important guidance to future computational studies of such catalyst systems.

Sub nanometer clusters in catalysis

Sub nanometer transition metal clusters composed of a small number of atoms exhibit unexpected electronic, optical, magnetic and catalytic properties that often change substantially as a function of cluster atomicity. Several factors influence their unique catalytic behavior, including their discrete electronic structure of molecular-like orbitals and the accessibility of their low-coordinated atoms. In addition, these factors are strongly correlated so that changes in their morphology may provoke large modifications to their electronic structure and vice versa. The thermodynamic instability of clusters makes it necessary to stabilize them with protective ligands in solution or to support them on solid matrices for practical applications, which introduces non-negligible modifications into their properties. Understanding their cause and extent is the key point to potentially achieve a fine tuning of their catalytic behavior. Selected examples are discussed illustrating important points on this matter, such as the influence of cluster morphology on reactivity, the need of anchoring clusters to avoid sintering and deactivation, and the possible formation of clusters in solution or under reaction conditions, with the associated difficulty to identify them as the true active species.

Crystal-plane effect of Cu2O templates on compositions, structures and catalytic performance of Ag/Cu2O nanocomposites

The compositions, structures and catalytic performance of acquired Ag/Cu₂O nanocomposites are strongly dependent on the crystal plane of employed Cu₂O solid templates.

Gas phase selective propylene epoxidation over La2O3-supported cubic silver nanoparticles

It is shown that the Ag nanocube/La₂O₃ interface catalyses gas phase oxidation of propylene to propylene oxide cooperatively with enhanced selectivity and conversion. Dioxygen is preferentially activated and dissociated by La₂O₃(001) and the active atomic oxygen over the Ag(100) facet leads to selective propylene epoxidation.

Synthesis of silver particles stabilized by a bifunctional SiHx–NHy–PMHS oligomer as recyclable nanocatalysts for the catalytic reduction of 4-nitrophenol

Bifunctional oligomers with both reducing and stabilizing functionalities were prepared and successfully applied to the preparation of silver colloids of around 2 nm size without employing a strong stabilizer such as S and P, which was quite difficult to achieve. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) were performed to determine the morphology and particle size of the Ag colloids. UV-vis spectroscopy and X-ray absorption spectroscopy (XAS) were implemented to investigate the oxidation state of the Ag colloids. Synthesis parameters such as the density control of the ligating functionalities, the propinquity of the reducing and stabilizing groups, the extent of ligand stabilization and the reducing rates were found to have important effects on the formation and stabilization of Ag colloids. The as-synthesized Ag colloids were very stable even after being deposited on silica; then, they were subjected to calcination to get rid of the organics, which afforded Ag NPs (1.9–3.5 nm) on silica with narrow size distribution. These Ag NPs performed excellently in catalytic 4-nitrophenol reduction with conversion of up to 98% within 10 min. Furthermore, the Ag nanoparticles were quite stable and exhibited excellent reusability for seven successive reaction cycles without obvious decay. The straightforward synthesis of the ultra-small and stable Ag NPs has the potential for applications in the synthesis of other supported late transition metals.

A novel strategy using bifunctional SiH_x–NH_y–PMHS without using strong stabilizers was applied to synthesize Ag NPs of around 2 nm size.

Towards operando computational modeling in heterogeneous catalysis

An increased synergy between experimental and theoretical investigations in heterogeneous catalysis has become apparent during the last decade. Experimental work has extended from ultra-high vacuum and low temperature towards operando conditions. These developments have motivated the computational community to move from standard descriptive computational models, based on inspection of the potential energy surface at 0 K and low reactant concentrations (0 K/UHV model), to more realistic conditions. The transition from 0 K/UHV to operando models has been backed by significant developments in computer hardware and software over the past few decades. New methodological developments, designed to overcome part of the gap between 0 K/UHV and operando conditions, include (i) global optimization techniques, (ii) ab initio constrained thermodynamics, (iii) biased molecular dynamics, (iv) microkinetic models of reaction networks and (v) machine learning approaches. The importance of the transition is highlighted by discussing how the molecular level picture of catalytic sites and the associated reaction mechanisms changes when the chemical environment, pressure and temperature effects are correctly accounted for in molecular simulations. It is the purpose of this review to discuss each method on an equal footing, and to draw connections between methods, particularly where they may be applied in combination.

A comparative DFT study on single-atom catalysis of CO oxidation over Al- and P-embedded hexagonal boron-nitride nanosheets

Density functional theory calculations are performed to compare catalytic oxidation of CO molecule over Al- and P-embedded hexagonal boron nitride nanosheet (h-BN). It is found that the Al and P adatom can be stably anchored on the boron-vacancy site of h-BN, as evidenced by a relatively large adsorption energy and charge-transfer value. According to our findings, the oxidation of CO over these surfaces proceeds via the Langmuir-Hinshelwood mechanism, followed by the elimination of the remaining atomic O by another CO molecule. Meanwhile, the stronger adsorption of O₂ than CO avoids poisoning of the active site of both surfaces. The results of the present study indicate that Al-doped h-BN exhibits higher catalytic activity for CO oxidation than P-doped one, which may provide a valuable guidance on design metal-free catalysts to remove toxic CO molecules.

Carbon nitride supported Fe2 cluster catalysts with superior performance for alkene epoxidation

Sub-nano metal clusters often exhibit unique and unexpected properties, which make them particularly attractive as catalysts. Herein, we report a "precursor-preselected" wet-chemistry strategy to synthesize highly dispersed Fe2 clusters that are supported on mesoporous carbon nitride (mpg-C3N4). The obtained Fe2/mpg-C3N4 sample exhibits superior catalytic performance for the epoxidation of trans-stilbene to trans-stilbene oxide, showing outstanding selectivity of 93% at high conversion of 91%. Molecular oxygen is the only oxidant and no aldehyde is used as co-reagent. Under the same condition, by contrast, iron porphyrin, single-atom Fe, and small Fe nanoparticles (ca. 3 nm) are nearly reactively inert. First-principles calculations reveal that the unique reactivity of the Fe2 clusters originates from the formation of active oxygen species. The general applicability of the synthesis approach is further demonstrated by producing other diatomic clusters like Pd2 and Ir2, which lays the foundation for discovering diatomic cluster catalysts.

Metal Catalysts for Heterogeneous Catalysis: From Single Atoms to Nanoclusters and Nanoparticles

Metal species with different size (single atoms, nanoclusters, and nanoparticles) show different catalytic behavior for various heterogeneous catalytic reactions. It has been shown in the literature that many factors including the particle size, shape, chemical composition, metal-support interaction, and metal-reactant/solvent interaction can have significant influences on the catalytic properties of metal catalysts. The recent developments of well-controlled synthesis methodologies and advanced characterization tools allow one to correlate the relationships at the molecular level. In this Review, the electronic and geometric structures of single atoms, nanoclusters, and nanoparticles will be discussed. Furthermore, we will summarize the catalytic applications of single atoms, nanoclusters, and nanoparticles for different types of reactions, including CO oxidation, selective oxidation, selective hydrogenation, organic reactions, electrocatalytic, and photocatalytic reactions. We will compare the results obtained from different systems and try to give a picture on how different types of metal species work in different reactions and give perspectives on the future directions toward better understanding of the catalytic behavior of different metal entities (single atoms, nanoclusters, and nanoparticles) in a unifying manner.

Heterogeneous Fe3 single-cluster catalyst for ammonia synthesis via an associative mechanism

The current industrial ammonia synthesis relies on Haber–Bosch process that is initiated by the dissociative mechanism, in which the adsorbed N₂ dissociates directly, and thus is limited by Brønsted–Evans–Polanyi (BEP) relation. Here we propose a new strategy that an anchored Fe₃ cluster on the θ-Al₂O₃(010) surface as a heterogeneous catalyst for ammonia synthesis from first-principles theoretical study and microkinetic analysis. We have studied the whole catalytic mechanism for conversion of N₂ to NH₃ on Fe₃/θ-Al₂O₃(010), and find that an associative mechanism, in which the adsorbed N₂ is first hydrogenated to NNH, dominates over the dissociative mechanism, which we attribute to the large spin polarization, low oxidation state of iron, and multi-step redox capability of Fe₃ cluster. The associative mechanism liberates the turnover frequency (TOF) for ammonia production from the limitation due to the BEP relation, and the calculated TOF on Fe₃/θ-Al₂O₃(010) is comparable to Ru B5 site.

The current industrial ammonia synthesis relies on the Haber-Bosch process that is limited by the Brønsted–Evans–Polanyi relation. Here, the authors propose a new strategy that an anchored Fe₃ on θ-Al₂O₃(010) surface serves as a heterogeneous single cluster catalyst for ammonia synthesis from first-principles calculations and microkinetic analysis.

Interactions of gaseous molecules with X-ray photons and photoelectrons in AP-XPS study of solid surface in gas phase

Studies of the surface of a catalyst in the gas phase via photoelectron spectroscopy is an important approach to establish a correlation between the surface of a catalyst under reaction conditions or during catalysis and its corresponding catalytic performance. Unlike the well understood interactions between photoelectrons and the atomic layers of a surface in ultrahigh vacuum (UHV) and the well-developed method of quantitative analysis of a solid surface in UHV, a fundamental understanding of the interactions between X-ray photons and gaseous molecules and between photoelectrons and molecules of the gas phase in ambient pressure X-ray photoelectron spectroscopy (AP-XPS) is lacking. Through well designed experiments, here the impact of the interactions between photoelectrons and gaseous molecules and interactions between X-ray photons and gaseous molecules on the intensity of the collected photoelectrons have been explored. How the changes in photoelectron intensity resulting from these interactions influence measurement of the authentic atomic ratio of element M to A of a solid surface has been discussed herein, and methods to correct the measured nominal atomic ratio of two elements of a solid surface upon travelling through a gas phase to its authentic atomic ratio have been developed.

Anchoring zero valence single atoms of nickel and iron on graphdiyne for hydrogen evolution

Electrocatalysis by atomic catalysts is a major focus of chemical and energy conversion effort. Although transition-metal-based bulk electrocatalysts for electrochemical application on energy conversion processes have been reported frequently, anchoring the stable transition-metal atoms (e.g. nickel and iron) still remains a practical challenge. Here we report a strategy for fabrication of ACs comprising only isolated nickel/iron atoms anchored on graphdiyne. Our findings identify the very narrow size distributions of both nickel (1.23 Å) and iron (1.02 Å), typical sizes of single-atom nickel and iron. The precision of this method motivates us to develop a general approach in the field of single-atom transition-metal catalysis. Such atomic catalysts have high catalytic activity and stability for hydrogen evolution reactions.

Single atom catalysts provide the most efficient metal atoms usage and afford active site homogeneity, but surface attachment has proven challenging. Here, the authors use triple-bond-rich graphdiyne to anchor nickel/iron atoms and show high hydrogen evolution electrocatalysis activities.

Mesoporous black TiO2-x/Ag nanospheres coupled with g-C3N4 nanosheets as 3D/2D ternary heterojunctions visible light photocatalysts

3D mesoporous black TiO_2-x/Ag nanosphere coupled with 2D g-C₃N₄ sheet ternary heterojunctions are successfully fabricated through a facile evaporation-induced self-assembly (EISA) process and photodeposition method, followed by a mild calcination (350°C) under an argon atmosphere after an in situ solid-state chemical reduction strategy. The resultant mesoporous black TiO_2-x/Ag/g-C₃N₄ ternary heterojunctions with narrow band gap of∼2.27eV possess a relative high specific surface area of∼100m²g^-1, main pore size of 6.2nm and the highest visible-light-driven photocatalytic property for degradation of methyl orange (97%) and methylene blue (99%). The apparent reaction rate constants (k) of mesoporous black TiO_2-x/Ag/g-C₃N₄ for methyl orange and methylene blue are∼9 and 11 times higher than that of pristine TiO₂. The possible mechanism is proposed, and the excellent photocatalytic property can be ascribed to the introduction of Ti³⁺ self-doping and g-C₃N₄, which favor the visible light absorption and the separation of electron-hole pairs, the surface plasma resonance effect of Ag nanoparticle, and the mesoporous networks offer more surface active sites.

Bimetallic Ag-Pt Sub-nanometer Supported Clusters as Highly Efficient and Robust Oxidation Catalysts

A combined experimental and theoretical investigation of Ag-Pt sub-nanometer clusters as heterogeneous catalysts in the CO→CO₂ reaction (COox) is presented. Ag₉ Pt₂ and Ag₉ Pt₃ clusters are size-selected in the gas phase, deposited on an ultrathin amorphous alumina support, and tested as catalysts experimentally under realistic conditions and by first-principles simulations at realistic coverage. In situ GISAXS/TPRx demonstrates that the clusters do not sinter or deactivate even after prolonged exposure to reactants at high temperature, and present comparable, extremely high COox catalytic efficiency. Such high activity and stability are ascribed to a synergic role of Ag and Pt in ultranano-aggregates, in which Pt anchors the clusters to the support and binds and activates two CO molecules, while Ag binds and activates O₂ , and Ag/Pt surface proximity disfavors poisoning by CO or oxidized species.

Silver Nanoparticles in the Water Environment in Malaysia: Inspection, characterization, removal, modeling, and future perspective

The current status of silver nanoparticles (AgNPs) in the water environment in Malaysia was examined and reported. For inspection, two rivers and two sewage treatment plants (STPs) were selected. Two activated carbons derived from oil palm (ACfOPS) and coconut (ACfCS) shells were proposed as the adsorbent to remove AgNPs. It was found that the concentrations of AgNPs in the rivers and STPs are in the ranges of 0.13 to 10.16 mg L⁻¹ and 0.13 to 20.02 mg L⁻¹, respectively, with the highest concentration measured in July. ACfOPS and ACfCS removed up to 99.6 and 99.9% of AgNPs, respectively, from the water. The interaction mechanism between AgNPs and the activated carbon surface employed in this work was mainly the electrostatic force interaction via binding Ag⁺ with O⁻ presented in the activated carbon to form AgO. Fifteen kinetic models were compared statistically to describe the removal of AgNPs. It was found that the experimental adsorption data can be best described using the mixed 1,2-order model. Therefore, this model has the potential to be a candidate for a general model to describe AgNPs adsorption using numerous materials, its validation of which has been confirmed with other material data from previous works.

Controlling the charge state of supported nanoparticles in catalysis: lessons from model systems

Model systems are very important to identify the working principles of real catalysts, and to develop concepts that can be used in the design of new catalytic materials.

Computational screening of a single transition metal atom supported on the C2N monolayer for electrochemical ammonia synthesis

The single Mo atom supported by C₂N layer is an effective electrocatalyst for NH₃ synthesis from N₂.