Remineralization of enamel subsurface lesions by casein phosphopeptide-stabilized calcium phosphate solutions

Treatment of white spot lesions with ACP paste and microabrasion

OBJECTIVE

To examine the effects of application of casein phosphopeptide amorphous calcium phosphate (CPP-ACP) paste and microabrasion treatment on the regression of white spot lesions (WSLs).

MATERIALS AND METHODS

Artificially-induced WSLs in bovine enamel were randomly assigned to one of four treatment groups: CPP-ACP paste only, microabrasion only, microabrasion and CPP-ACP, and a control. Samples were treated with each regimen twice daily for 2 weeks and stored in remineralizing solution between the treatments. Quantitative light-induced fluorescence was used to measure changes in fluorescence, which indicate changes in mineral content of WSLs immediately before (T1) and 2 weeks after treatment (T2). A two-within-subject factor analysis of variance was used to analyze the significance of any changes in mineral content of the lesions from T1 to T2.

RESULTS

There was a statistically significant (P < .05) gain in fluorescence associated with the microabrasion only, as well as the microabrasion and CPP-ACP treatments. The changes in fluorescence for the CPP-ACP treatment alone were not statistically significant (P  =  .40).

CONCLUSIONS

CPP-ACP paste alone does not significantly improve the fluorescence value (ie, the mineral content) of WSLs. Within the limitations of this in vitro study, microabrasion treatment with or without CPP-ACP improved the fluorescence and thus reduced WSLs.

Tricho-dento-osseous syndrome: diagnosis and dental management

Tricho-dento-osseous (TDO) syndrome is a rare, autosomal dominant disorder principally characterised by curly hair at infancy, severe enamel hypomineralization and hypoplasia and taurodontism of teeth, sclerotic bone, and other defects. Diagnostic criteria are based on the generalized enamel defects, severe taurodontism especially of the mandibular first permanent molars, an autosomal dominant mode of inheritance, and at least one of the other features (i.e., nail defects, bone sclerosis, and curly, kinky or wavy hair present at a young age that may straighten out later). Confusion with amelogenesis imperfecta is common; however, taurodontism is not a constant feature of any of the types of amelogenesis imperfecta. Management of TDO requires a team approach, proper documentation, and a long-term treatment and follow-up plan. The aim of treatment is to prevent problems such as sensitivity, caries, dental abscesses, and loss of occlusal vertical dimension through attrition of hypoplastic tooth structure. Another aim is to restore function of the dentition and enhance the esthetics and self-esteem of the patient. This paper proposes treatment approaches that include preventive, restorative, endodontic, prosthetic, and surgical options to management. In addition, it sheds light on the difficulties faced during dental treatment of such cases.

Remineralization Models

During the ICNARA 2 conference, a workshop was held on remineralization models. The group considered the role of remineralization models, whether there was one ideal in situ model design, what essential features should be incorporated into an in situ model, other alternative models, and what new methods for measuring remineralization were on the horizon. This paper summarizes the discussion. In situ and other caries models can be used as a surrogate for caries clinical trials but only when data exist to validate the model. In situ model design should be flexible to allow for investigation of different aspects of the caries process; however, several essential features were identified that should be incorporated into the study design. A range of other caries models was discussed, including the study of non-cavitated lesions, lesions post-orthodontic therapy, plaque retention models to form more standardized lesions, and the study of root caries lesions. Numerous new methods for quantifying remineralization were discussed, but it was considered that these require validation before they can be used in clinical trials.

Optimization of calcium concentration of saliva with phosphoryl oligosaccharides of calcium (POs-Ca) for enamel remineralization in vitro

OBJECTIVE

Phosphoryl oligosaccharides of calcium (POs-Ca) are highly soluble calcium source made from potato starch. The aim of this study was to investigate the optimal concentrations of POs-Ca for the remineralization of subsurface enamel lesions in vitro.

DESIGN

Demineralized bovine enamel slabs (n=5) were remineralized in vitro for 24h at 37°C with artificial saliva (AS) containing 0-0.74% POs-Ca to adjust the Ca/P ratio to 0.4-3.0, then sectioned and analysed by transversal microradiography (TMR). The data were analysed by Scheffe's post hoc test. The Ca/P ratio with most remineralization was used to investigate the effect of calcium on enamel remineralization (n=11). The demineralized slabs were treated with AS with calcium-chloride- (CaCl2-) or POs-Ca with an identical calcium content, and sectioned for TMR and wide-angle X-ray diffraction (WAXRD) analyses to evaluate the local changes in hydroxyapatite (HAp) crystal content. The data were analysed using the Mann-Whitney U-test.

RESULTS

The highest mineral recovery rate resulted from addition of POs-Ca to adjust the Ca/P to 1.67. At this ratio, the mineral recovery rate for AS containing POs-Ca (24.2±7.4%) was significantly higher than that for AS containing CaCl2 (12.5±11.3%) (mean±SD, p<0.05). The recovery rate of HAp crystallites for AS containing POs-Ca (35.7±10.9%) was also significantly higher than that for AS containing CaCl2 (23.1±13.5%) (p<0.05). The restored crystallites were oriented in the same directions as in sound enamel.

CONCLUSIONS

POs-Ca effectively enhances enamel remineralization with ordered HAp at a Ca/P ratio of 1.67.

Preventing and treating white-spot lesions associated with orthodontic treatment: a survey of general dentists and orthodontists

BACKGROUND

The authors investigated the prevention and treatment of white-spot lesions (WSLs) during and after orthodontic therapy from the perspective of general dentists and orthodontists.

METHODS

The authors administered a cross-sectional survey to general dentists (n = 191) and orthodontists (n = 305) in Virginia, Maryland and North Carolina.

RESULTS

Sixty-nine percent of general dentists and 76 percent of orthodontists recommended in-office fluoride treatment for patients with severe WSLs immediately after orthodontic treatment. Sixty-nine percent of general dentists reported that they had treated WSLs during the previous year, and 37 percent of orthodontists reported that they had removed braces because of patients' poor oral hygiene. Sixty percent of orthodontists referred patients with WSLs to general dentists for treatment. Eighty-five percent of orthodontists responded that they encouraged patients to use a fluoride rinse as a preventive measure. More than one-third of general dentists indicated that severe WSLs after orthodontic treatment could have a negative effect on their perception of the treating orthodontist.

CONCLUSIONS

WSLs are a common complication of orthodontic treatment and their presence can result in a negative perception of the treating orthodontist by the patient's general dentist. Clinical implications. General dentists and orthodontists should work together to prevent the development of WSLs in their patients. Treatment with fluoride supplements and motivating and training patients to practice good oral hygiene will help achieve this goal. Treatment after debonding should include the topical application of low concentrations of fluoride.

Effects of procedures of remineralization around orthodontics bracket bonded by self-etching primer on its shear bond strength

AIM

To evaluate the effect of the application of either fluoride varnish (FV) or amorphous calcium phosphate (ACP) as preventive method on shear bond strength (SBS) at the same time of their bonding in vitro using self-etching primer (SEP) as an agent for enamel pre-treatment FV.

MATERIALS AND METHODS

SIXTY HUMAN BICUSPIDS WERE RANDOMLY DIVIDED INTO FIVE GROUPS: G1 was rubbed by SEP for 5 s, G2 for 5 s by SEP and ACP, G3 for 10 s by SEP and ACP, G4 for 5 s by SEP and FV, and G5 for 10 s by SEP and FV. Stainless steel metal brackets were bonded. A Zwick/Roell Z020 Universal Testing Machine (Zwick GmbH and Co, Germany) with a 500 N load cell was used to test SBS. SBS values were analyzed using one-way analysis of variance (ANOVA) and Tukey's post hoc tests (P≤0.05). Differences in adhesive remnant index (ARI) values between groups were calculated.

RESULTS

The mean SBS values were 10.00±4.48 MPa, 5.71±4.3 MPa, 7.47±4.44 MPa, 4.4±2.39 MPa, and 3.98±0.83 MPa for groups 1-5, respectively. Significant differences in SBS values between all groups were found. The mean SBS values of groups 2, 4, and 5 were significantly lower than that of the G1. No significant difference was found between G3 and G1. Significant difference in ARI between the groups was found (P<0.001) and G1 had a significantly higher ARI.

CONCLUSION

The results suggested that the application of ACP at the same time of using SEP for 10 s has no effect on SBS.

Comparison of quantitative light-induced fluorescence, digital photography and transverse microradiography for quantification of enamel remineralization

BACKGROUND

Quantitative light-induced fluorescence (QLF) and digital photography (DP) have been proposed as clinical methods for measuring changes in enamel mineral content. The aim of this study was to compare the ability of QLF and DP with the in vitro gold standard transverse microradiography (TMR) to measure the remineralization of enamel subsurface lesions.

METHODS

Subsurface lesions were formed in enamel (n = 40) and exposed to remineralization solutions for 10 days. Changes were analysed by DP, QLF and TMR to determine percentage changes in luminescence (%L), fluorescence (%F) and mineral content (%R), respectively and correlation between these parameters determined.

RESULTS

The correlations between TMR and QLF (r = 0.63), TMR and DP (r = 0.59), and DP and QLF (r = 0.64) were all moderate but statistically significant (p < 0.001). The variability in %L and, to a lesser extent, %F values significantly impacted on the potential role of DP and QLF as methods by which mineral content changes produced by remineralization treatments could be accurately measured.

CONCLUSIONS

Both QLF and DP provided data that correlated moderately with TMR data. QLF images were easier to analyse, free of glare and had less variability compared with those produced using DP.

Biofunctional properties of caseinophosphopeptides in the oral cavity

Caseinophosphopeptides (CPPs), bioactive peptides released from caseins, have the ability to enhance bivalent mineral solubility. This is relevant to numerous biological functions in the oral cavity (promotion of tooth enamel remineralisation, prevention of demineralisation and buffering of plaque pH). Therefore, CPPs may play a positive role as prophylactic agents for caries, enamel erosion and regression of white spot lesions. Most in vitro and in situ studies demonstrate strong evidence for the bioactivity of CPPs in the oral cavity. Nevertheless, relatively little is known concerning their use as adjuvants for oral health and more particularly regarding their long-term effects on oral health.

Influence of extra- and intra-oral application of CPP-ACP and fluoride on re-hardening of eroded enamel

OBJECTIVES

This in-situ study aimed to investigate the potential of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) crème and fluoride mouth rinse to re-harden erosively softened enamel and to evaluate the influence of an intra-oral or extra-oral application.

METHODS

Ten volunteers performed five experimental series. Per series, four bovine enamel samples were extra-orally softened by immersion in Sprite light(®) (2 min) and subsequently worn intra-orally for 5 min in intra-oral appliances. Thereafter, samples were treated (3 min) with either 250 ppm AmF/SnF(2) solution (Meridol) (series 1 and 3) or CPP-ACP crème (Tooth Mousse) (series 2 and 4). Application of the substances was performed extra-orally (series 1 and 2) or intra-orally (series 3 and 4). Untreated specimens served as control (series 5). The appliances were worn for 4 h afterwards. Knoop microhardness (KHN) measurement was performed at baseline, after softening and after completing of the respective run. Data were statistically analyzed by ANOVA and Bonferroni/Dunn post-hoc test.

RESULTS

No significant difference in baseline microhardness was observed, while immersion in Sprite light reduced the microhardness significantly. Significant re-hardening after intra-oral exposure occurred in all series, but baseline microhardness was not achieved. Microhardness in series 2 was significantly higher than that in series 1 and 5. No significant differences in KHN were detected between series 3, 4 and 5. The re-hardening ΔKHN (final microhardness - microhardness after erosion) was not significant different in all five series.

CONCLUSION

Intra-oral application of CPP-ACP crème or fluoride solution provides no benefit regarding re-hardening of erosively softened enamel.

Effects of demineralizaton-inhibition procedures on the bond strength of brackets bonded to demineralized enamel surface

Objective

To study and compare the effects of different demineralization-inhibition methods on the shear bond strength (SBS) and fracture mode of an adhesive used to bond orthodontic brackets to demineralized enamel surfaces.

Methods

Eighty freshly extracted, human maxillary premolars were divided into 4 equal groups and demineralized over the course of 21 days. Brackets were bonded to the demineralized enamel of teeth in Group 1. In Group 2, bonding was performed following resin infiltration (ICON®, DMG, Hamburg, Germany). Before bonding, pre-treatment with acidulated phosphate fluoride (APF) or solutions containing casein phosphopeptide-amorphous calcium phosphate with 2% neutral sodium fluoride (CPP-ACP/wF) was performed in Groups 3 and 4, respectively. The SBS values of the brackets were measured and recorded following mechanical shearing of the bracket from the tooth surface. The adhesive remnant index (ARI) scores were determined after the brackets failed. Statistical comparisons were performed using one-way ANOVA, Tukey's post-tests, and G-tests.

Results

Significant differences were found in some of the intergroup comparisons of the SBS values (F = 39.287, p < 0.001). No significant differences were found between the values for the APF-gel and control groups, whereas significantly higher SBS values were recorded for the resin-infiltrated and CPP-ACP/wF-treated groups. The ARI scores were also significantly different among the 4 groups (p < 0.001).

Conclusions

Tooth surfaces exposed to resin infiltration and CPP-ACP/wF application showed higher debonding forces than the untreated, demineralized surfaces.

Remineralization of early enamel lesions using casein phosphopeptide amorphous calcium Phosphate: an ex-vivo study

Objective:

This study aimed at qualitatively evaluating the remineralization potential of casein phosphopeptide amorphous calcium phosphate on artificial early enamel lesions in an ex-vivo scenario by observing the treated tooth surface using a scanning electron microscope (SEM).

Materials and Methods:

This randomized study was conducted on 10 subjects undergoing orthodontic treatment with premolar extraction as part of their treatment. Artificial white lesions were created with the application of 37% phosphoric acid for 20 mins. Teeth were then divided into two groups: one experimental and the other control. Customised orthodontic band with a window was luted with intermediate restorative material in the experimental group whereas in the control group, band without a window was luted. The casein phosphopeptide amorphous calcium phosphate (GC TOOTH MOUSSE) paste was then applied on the window region of the experimental group for 3 mins thrice daily after meals for 14 days, whereas no paste was applied in the control group. After 14 days, teeth were extracted and viewed under an SEM.

Results:

The study groups showed remineralization of the lesions as compared with the control group in most of the samples.

Conclusion:

Casein phophopeptide could significantly remineralize the artificial enamel lesions in vivo.

Experimental antibacterial and mineralizing calcium phosphate-based treatment for dentin surfaces

Objectives: This study aimed to determine the efficacy of experimental calcium phosphate-based solutions (sCaP) containing fluoride (F), with and without zinc (Zn) ions on reducing susceptibility to acid dissolution and Streptococcus mutans ( S. mutans) colonization of dentin surfaces.

Methods: Dentin sections were treated with double distilled water (control) and with sCaP solutions differing in pH and in F− and/or Zn2+ ion concentrations. Solutions A (pH 7); B, C, and D (pH 5.5); solution C, twice Zn2+ and F− ion concentration compared to B; solution D is similar to C but without Zn2+. The dentin surfaces were characterized using scanning electron microscopy (SEM), x-ray diffraction, and Fourier Transform Infrared spectroscopy. Dissolution was determined in acidic buffer. Bacterial ( S. mutans) attachment and growth were evaluated using SEM and Bioquant. Statistical analyses applied analysis of variance (ANOVA) and Duncan’s multiple Range test.

Results: Compared to control, dentin surfaces treated with sCaP solutions showed: (a) occluded dentin tubules; (b)reduced susceptibility to acid dissolution; and (c) Zn2+ ions were more effective than F− ions in inhibiting bacterial colonization.

Significance: Acidic sCaP containing both F and Zn ions have mineralizing, acid resistance, and antibacterial effects and may be potentially useful as a strategy against dentin caries formation and progression.

In vivo remineralising effect of GC tooth mousse on early dental enamel lesions: SEM analysis

OBJECTIVE

Casein phosphopeptide-amorphous calcium phosphate nanocomplexes (CPP-ACP) exhibit anticariogenic potential in laboratory, animal and human experiments. The remineralising potential of synthetic CPPs on early enamel caries was investigated.

DESIGN

In vivo study.

SETTING

University of Naples 'Federico II', School of Dentistry, Department of Paediatric Dentistry, 2010, Italy.

PARTICIPANTS

40 volunteers (age range 10-16 years) were recruited and divided in two groups of 20 (Group A and B).

INTERVENTIONS

In Group A subjects two demineralised enamel specimens were placed on the buccal surfaces of the first molars and subjects were instructed to apply a commercial product containing CPPs (GC Tooth Mousse) only on the right-sided specimen and a placebo mousse on the left, for 1 month. In Group B subjects two enamel specimens were similarly placed into the mouth and used as controls.

RESULTS

SEM analysis revealed a diffuse and homogeneous mineral coating, reducing the surface alterations only in the demineralised specimens treated with synthetic CPPs into the mouth.

CONCLUSIONS

Results demonstrate that CPPs are able to promote remineralisation of early enamel lesions.

Remineralization effects of casein phosphopeptide-amorphous calcium phosphate crème on artificial early enamel lesions of primary teeth

BACKGROUND

Caries in children younger than 72 months is called early childhood caries (ECC). Sixty-six per cent of Chinese children younger than 5 years old have dental decay, and about 97% of them are untreated.

AIMS

This in vitro study was conducted to evaluate the remineralization effects of the casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) crème on the artificial early enamel lesions of the primary teeth and to assess its caries-prevention efficiency.

DESIGN

Enamel specimens with artificial early lesions were produced and were then randomly divided into Group A: distilled and deionized water, DDW, as negative control; Group B: CPP-ACP crème, test group; Group C: 500 ppm NaF solution, as positive control. The enamel surface microhardness (SMH) was measured before, after demineralization, and 30 days after remineralization. The results were analysed with the SPSS 13.0 software package. The enamel specimens were analysed by the scanning electron microscope.

RESULTS

The CPP-ACP crème increased SMH of the eroded enamel significantly more than 500 ppm NaF solution did. The morphology of the enamel was different in each group.

CONCLUSIONS

The CPP-ACP crème is effective in remineralizing early enamel lesions of the primary teeth, a little more effective than 500 ppm NaF and can be used for the prevention of ECC.

Do enamel microabrasion and casein phosphopeptide-amorphous calcium phosphate affect shear bond strength of orthodontic brackets bonded to a demineralized enamel surface?

Objective:

To evaluate and compare the effects of enamel microabrasion, casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), and their combination on the shear bond strength (SBS) of orthodontic brackets bonded to demineralized enamel surface.

Materials and Methods:

One hundred human first premolar teeth were randomly allocated to one of five groups. Group I was considered as the control of other groups. For the remaining groups, demineralization was performed via solutions. In group II, brackets were directly bonded to the demineralized enamel surface. CPP-ACP was applied in group III, microabrasion was performed in group IV, and both microabrasion and CPP-ACP application were performed in group V. The specimens were tested for SBS. Bond failures were scored according to the Adhesive Remnant Index (ARI). Analysis of variance and Tukey tests were used to compare the SBS of the groups. ARI scores of the groups were evaluated with a G-test. The statistical significance was set at P &lt;. 05 level.

Results:

Statistically significant difference was found among the five investigated groups (F  =  111.870; P &lt; .001). The SBS of groups II and IV were significantly lower than the other groups. No statistically significant difference was found among groups I (control; mean 24.1 ± 4.1 MPa), III (mean 22.0 ± 3.6 MPa), and V (mean 24.3 ± 1.9 MPa). Microabrasion and combination with CPP-ACP showed higher SBS compared to the control group. The differences between ARI scores of the groups were statistically significant (P &lt; .001).

Conclusion:

CPP-ACP pretreatment, microabrasion of the enamel, and the combination of these two methods improve the bonding to demineralized enamel.

A comparison of surface roughness after micro abrasion of enamel with and without using CPP-ACP: An in vitro study

AIM

The aim of this study was to evaluate the surface roughness of enamel after micro abrasion with and without using remineralization agent, CPP-ACP (Casein Phosphopeptide-Amorphous Calcium Phosphate).

MATERIALS AND METHODS

Thirty freshly extracted anterior teeth were collected. The samples were randomly assigned to two study and one control group. Group A (n = 10) containing teeth in which only micro abrasion was done, Group B (n = 10) containing teeth in which CPP-ACP (G C Tooth Mousse) was applied after micro abrasion for a period of 30 days, once daily for three minutes and Group C (n = 10) in which no preparation was done and which acted as the control group. The samples were stored in artificial saliva and evaluated after 30 days, using surface profilometer. The results were tabulated and statistically analyzed.

RESULTS

According to the results of this study, a combination of the micro abrasion procedure and CPP-ACP application reduced the enamel surface roughness significantly, when compared to micro abrasion done alone.

CONCLUSION

Application of CPP-ACP after micro abrasion procedure significantly reduces the enamel surface roughness thereby decreasing the risk of caries.

Dentin hypersensitivity: Recent trends in management

Dentinal hypersensitivity (DH) is a common clinical condition usually associated with exposed dentinal surfaces. It can affect patients of any age group and most commonly affects the canines and premolars of both the arches. This article concisely reviews the patho-physiology, mechanism and clinical management of the DH. Treatment of DH should start with an accurate diagnosis. Differential diagnosis should be made and all other probable causes should be excluded. An often neglected phase of clinical management of DH is the identification and treatment of the causative factors of DH. By removing the etiological factors, the condition can be even prevented from occurring or recurring. There are various treatment modalities available which can be used at home or may be professionally applied. The “at home” desensitizing agents include toothpastes, mouthwashes or chewing gums and they act by either occluding the dentinal tubules or blocking the neural transmission. This article also discusses the recent treatment options like bioglass, Portland cement, lasers and casein phosphopeptide.

Remineralization potential of fluoride and amorphous calcium phosphate-casein phospho peptide on enamel lesions: An in vitro comparative evaluation

Aim:

This in vitro study was conducted on enamel blocks of human premolars with the aim of evaluating the remineralization potential of fluoride and ACP-CPP and the combination of ACP-CPP and fluoride on early enamel lesions.

Materials and Methods:

Fifteen intact carious free human premolars were selected. The coronal part of each tooth was sectioned into four parts to make 4 enamel blocks. The baseline SMH (surface microhardness) was measured for all the enamel specimens using Vickers microhardness (VHN) testing machine. Artificial enamel carious lesions were created by inserting the specimens in demineralization solution for 3 consecutive days. The SMH of the demineralised specimens was evaluated. Then the four enamel sections of each tooth were subjected to various surface treatments, i.e. Group 1- Fluoride varnish, Group 2- ACP-CPP cream, Group 3- Fluoride + ACP-CPP & Group 4- Control (No surface treatment). A caries progression test (pH cycling) was carried out, which consisted of alternative demineralization (3hours) and remineralization with artificial saliva (21 hours) for five consecutive days. After pH cycling again SMH of each specimen was assessed to evaluate the remineralization potential of each surface treatment agent. Then, to asses the remineralization potential of various surface treatments at the subsurface level, each enamel specimen was longitudinally sectioned through the centre to expose the subsurface enamel area. Cross-sectional microhardness (CSMH) was evaluated to assess any subsurface remineralization

Results:

Statistical analysis using one-way ANOVA followed by multiple comparisons test was applied to detect significant differences at P ≤ 0.05 levels between various surface treatments at different phases.

Conclusions:

With in the limits, the present study concludes that; ACP-CPP cream is effective, but to a lesser extent than fluoride in remineralizing early enamel caries at surface level. Combination of fluoride and ACP-CPP does not provide any additive remineralization potential compared to fluoride alone. Fluoride, ACP-CPP and their combination are not effective in remineralizing the early enamel caries at the subsurface level.

Amorphous calcium phosphate and its application in dentistry

Amorphous Calcium Phosphate (ACP) is an essential mineral phase formed in mineralized tissues and the first commercial product as artificial hydroxyapatite. ACP is unique among all forms of calcium phosphates in that it lacks long-range, periodic atomic scale order of crystalline calcium phosphates. The X-ray diffraction pattern is broad and diffuse with a maximum at 25 degree 2 theta, and no other different features compared with well-crystallized hydroxyapatite. Under electron microscopy, its morphological form is shown as small spheroidal particles in the scale of tenths nanometer. In aqueous media, ACP is easily transformed into crystalline phases such as octacalcium phosphate and apatite due to the growing of microcrystalline. It has been demonstrated that ACP has better osteoconductivity and biodegradability than tricalcium phosphate and hydroxyapatite in vivo. Moreover, it can increase alkaline phosphatase activities of mesoblasts, enhance cell proliferation and promote cell adhesion. The unique role of ACP during the formation of mineralized tissues makes it a promising candidate material for tissue repair and regeneration. ACP may also be a potential remineralizing agent in dental applications. Recently developed ACP-filled bioactive composites are believed to be effective anti-demineralizing/remineralizing agents for the preservation and repair of tooth structures. This review provides an overview of the development, structure, chemical composition, morphological characterization, phase transformation and biomedical application of ACP in dentistry.

Effect of CPP-ACP Application on Flexural Strength of Bleached Enamel and Dentin Complex

In the absence of saliva, flexural strength of the bovine enamel-dentin complex decreases after in vitro simulation of both at-home and in-office bleaching procedures. Application of Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) subsequent to both bleaching regimens could compensate for this decrease.

Effects of a fluoride-containing casein phosphopeptide-amorphous calcium phosphate complex on the shear bond strength of orthodontic brackets

The purpose of this study was to investigate the effects of enamel pre-treatment with a new fluoride-containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) complex on the shear bond strength (SBS) of brackets bonded with etch-and-rinse or self-etching adhesive systems. The material comprised 66 extracted human premolars randomly divided into six equal groups with respect to the enamel pre-treatment and adhesive system employed: 1. No pre-treatment and brackets bonded with the etch-and-rinse adhesive system (Transbond XT). 2. Pre-treatment with fluoride-containing CPP-ACP paste (MI Paste Plus) and Transbond XT. 3. Pre-treatment with non-fluoride CPP-ACP paste (MI Paste) and Transbond XT.4. No pre-treatment and brackets bonded with the self-etching adhesive system (Transbond Plus). 5 and 6. Enamel pre-treated as for groups 2 and 3, respectively, and the Transbond Plus. Bonded specimens were subjected to thermal cycling (×1000) before SBS testing. The residual adhesive on the enamel surface was evaluated after debonding with the adhesive remnant index (ARI). Data evaluation was made using one-way analysis of variance and Tukey test for SBS results, and Kruskal-Wallis test for ARI results. The results showed that enamel pre-treatment with either fluoride or non-fluoride CPP-ACP paste had no significant effect on the SBS of the self-etching adhesive system (P > 0.05). Enamel pre-treatment with non-fluoride CPP-ACP in group 3 significantly reduced the SBS of the etch-and-rinse adhesive (P < 0.001), while pre-treatment with fluoride-containing CPP-ACP paste (groups 2 and 5) did not affect debonding values (P > 0.05). The fluoride-containing CPP-ACP did not compromise the SBS of brackets bonded with the tested etch-and-rinse and self-etching systems, but its non-fluoride version significantly decreased the SBS of the etch-and-rinse adhesive system.

MIH Supplementation Strategies

The use of calcium-phosphate casein on hypomineralized molars (molar incisor hypomineralization, MIH) has been proposed but not clinically investigated. Qualitative and quantitative effects of supplementation with a calcium-phosphate casein product on MIH molars were monitored over a period of three years. Molar replicas, minimally invasive biopsies and their SEM microphotographs, plus ESEM/EDX semi-quantitative peaks of elements present in affected enamel were evaluated. Mineralization, morphology, and porosity appeared markedly improved, with calcium and phosphate levels reaching almost normal levels at three years’ follow-up. The hypothesis tested was rejected, since calcium-phosphate casein improved enamel morphology in vivo.

Comparison of the remineralization potential of CPP-ACP and CPP-ACP with 900 ppm fluoride on eroded human enamel: An in situ study

OBJECTIVE

The aim of this in situ study was to compare the remineralization potential of pastes containing CPP-ACP and CPP-ACP with 900 ppm fluoride on human enamel softened by a cola drink.

DESIGN

Forty-five enamel specimens obtained from human third molar teeth were eroded in a cola drink for 8 min and then attached to intra-oral devices worn by five volunteers. The specimens were subjected to three different in situ remineralization protocols using: (1) CPP-ACP (Group I), (2) CPP-ACP with 900 ppm fluoride (Group II), and (3) saliva (Group III, control). Vickers microhardness measurements were obtained at baseline followed by demineralization and remineralization stages.

RESULTS

The CPP-ACP, CPP-ACP with 900 ppm fluoride and saliva controls resulted in 46.24%, 64.25% and 2.98% increase in post-erosion microhardness values, respectively. One-way ANOVA revealed statistically significant differences in the mean microhardness values between pastes containing CPP-ACP and CPP-ACP with 900 ppm fluoride.

CONCLUSIONS

Both CPP-ACP and CPP-ACP with 900 ppm fluoride substantially remineralized the softened enamel, with the CPP-ACP and fluoride combination showing higher remineralization potential than CPP-ACP. This study confirmed the synergistic effect of fluoride with CPP-ACP on remineralization of eroded enamel.

New Approaches to Enhanced Remineralization of Tooth Enamel

Dental caries is a highly prevalent diet-related disease and is a major public health problem. A goal of modern dentistry is to manage non-cavitated caries lesions non-invasively through remineralization in an attempt to prevent disease progression and improve aesthetics, strength, and function. Remineralization is defined as the process whereby calcium and phosphate ions are supplied from a source external to the tooth to promote ion deposition into crystal voids in demineralized enamel, to produce net mineral gain. Recently, a range of novel calcium-phosphate-based remineralization delivery systems has been developed for clinical application. These delivery systems include crystalline, unstabilized amorphous, or stabilized amorphous formulations of calcium phosphate. These systems are reviewed, and the technology with the most scientific evidence to support its clinical use is the remineralizing system utilizing casein phosphopeptides to stabilize and deliver bioavailable calcium, phosphate, and fluoride ions. The recent clinical evidence for this technology is presented and the mechanism of action discussed. Biomimetic approaches to stabilization of bioavailable calcium, phosphate, and fluoride ions and the localization of these ions to non-cavitated caries lesions for controlled remineralization show promise for the non-invasive management of dental caries.

Impact of two toothpastes on repairing enamel erosion produced by a soft drink: an AFM in vitro study

OBJECTIVES

The aim of the present in vitro study was the evaluation of two toothpastes (Sensodyne Pronamel and Biorepair Plus on repairing enamel erosion produced by a soft drink (Coca Cola), using Atomic Force Microscopy (AFM).

METHODS

Fifty extracted human central incisors free of caries were selected and divided in a treatment and a control half; they were kept in artificial saliva during whole experimentation. The treatment halves were divided into five groups; group 1: demineralization with soft drink; group 2: demineralization with soft drink + Pronamel; group 3: demineralization with soft drink + Biorepair Plus; group 4: intact enamel + Pronamel; group 5: intact enamel + Biorepair Plus. Specimen demineralization was carried on in 4 intervals of 2 min. In groups 2, 3, 4, and 5 the toothpastes were applied for 3 min at 0, 8, 24 and 36 h. The surface of each specimen was imaged by AFM and R(rms), root-mean-square roughness, and Maximum Depth of the cavities were registered.

RESULTS

Amongst treatment specimens of groups 1, 2, and 3 a statistically significant difference (P<0.01) in R(rms) and Maximum Depth values was registered: the toothpastes reduced enamel demineralization. No statistical differences in R(rms) values were registered between the two toothpastes.

CONCLUSIONS

The toothpastes tested (Pronamel and BioRepair Plus) offer a degree of protection from erosive drinks.

Nanomaterials in preventive dentistry

The prevention of tooth decay and the treatment of lesions and cavities are ongoing challenges in dentistry. In recent years, biomimetic approaches have been used to develop nanomaterials for inclusion in a variety of oral health-care products. Examples include liquids and pastes that contain nano-apatites for biofilm management at the tooth surface, and products that contain nanomaterials for the remineralization of early submicrometre-sized enamel lesions. However, the treatment of larger visible cavities with nanomaterials is still at the research stage. Here, we review progress in the development of nanomaterials for different applications in preventive dentistry and research, including clinical trials.

A comparative evaluation of casein phosphopeptide-amorphous calcium phosphate and fluoride on the shear bond strength of orthodontic brackets

The purpose of the study was to evaluate and compare the effects of topical application of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and fluoride on the shear bond strength (SBS) of orthodontic brackets bonded to human premolar teeth. Eighty extracted human premolar teeth were cleansed of soft tissue, then polished with non-fluoridated pumice, and immersed in water for 1-3 months until testing. The teeth were randomly divided into four groups: group 1, control, without pre-treatment of the enamel; group 2, the enamel was treated with 5 per cent sodium fluoride varnish for 4 minutes; group 3, the enamel was treated with CPP-ACP for 3 minutes; and group 4, the enamel was treated with 5 per cent sodium fluoride and CPP-ACP. All bonded specimens were immersed in distilled water at room temperature for 24 hours and subsequently tested for SBS in a universal testing machine. After debonding, the bracket bases and the enamel surfaces were examined by eye to assess any adhesive remaining, in accordance with the Adhesive Remnant Index (ARI). Descriptive statistics were calculated for each group. Analysis of variance and Tukey honestly significant difference (HSD) test were performed to compare the SBS of the groups. The chi-square test was used to evaluate differences in ARI scores between the groups. The SBS in group 2 was significantly lower than groups 1, 3, and 4 (P < 0.001). ARI scores were not significantly different between the four groups (P > 0.05). CPP-ACP, either alone or combined with fluoride, may safely be used as a prophylactic agent before bracket bonding.

Casein phosphopeptides promote calcium uptake and modulate the differentiation pathway in human primary osteoblast-like cells

Casein phosphopeptides (CPPs), originating by in vitro and/or in vivo casein digestion, are characterized by the ability to complex and solubilize calcium ions preventing their precipitation. Previous works demonstrated that CPPs improve calcium uptake by human differentiated intestinal tumor cell lines, are able to re-mineralize carious lesions in a dental enamel, and, as components of a diet, affect bone weight and calcium content in rats. The aim of the present study was to evaluate if CPPs can directly modulate bone cells activity and mineralization. Primary human osteoblast-like cells were established in culture from trabecular bone samples obtained from waste materials during orthopedic surgery. Commercial mixtures of bovine casein phosphopeptides were used. The CPP dependent intracellular calcium rises were monitored at the single cell level through fura2-fluorescence assays. Results show that CPPs: (i) stimulate calcium uptake by primary human osteoblast-like cells; (ii) increase the expression and activity of alkaline phosphatase, a marker of human osteoblast differentiation; (iii) affect the cell proliferation rate and the apoptotic level; (iv) enhance nodule formation by human SaOS-2. Taken together these results confirm the possibility that CPPs play a role as modulator of bone cell activity, probably sustained by their ability as calcium carriers. Although the exact mechanism by which CPPs act remains not completely clarified, they can be considered as potential anabolic factors for bone tissue engineering.

Effects of CPP-ACP paste on the shear bond strength of orthodontic brackets

OBJECTIVE

To evaluate the effect of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste on shear bond strength and debonding failure modes of orthodontic brackets.

MATERIALS AND METHODS

Freshly extracted premolars were randomly divided into four groups (n =18) as follows: in groups 1 and 3, the enamel was treated with a solution of CPP-ACP dissolved in artificial saliva; groups 2 and 4 served as controls, and the enamel was treated with artificial saliva. After conventional acid etching, in groups 1 and 2, brackets were bonded using a light-cured bonding system (Blugloo); while in groups 3 and 4, brackets were bonded using a conventional bonding system (Unite Bonding Adhesive). Bonded specimens were subjected to thermal cycling for 1000 cycles before debonding procedures. After debonding, teeth and brackets were examined under a stereomicroscope at 10x magnification to determine whether any adhesive remained, in accordance with the adhesive remnant index. The acid-etched enamel surfaces were also observed using scanning electron microscopy after treatment with and without CPP-ACP paste.

RESULTS

The shear bond strengths of group 1 were significantly higher than those seen in group 2 (P < .01). There was no significant difference in the shear bond strengths of groups 3 and 4 (P > .05). Scanning electron microscopic observation showed that the pretreated enamel surface was rougher than that of the control surface after acid etching.

CONCLUSION

The use of CPP-ACP can be considered as an alternative prophylactic application in orthodontic practice since it did not compromise bracket bond strength.

Structure-Composition-Property Relationships in Polymeric Amorphous Calcium Phosphate-Based Dental Composites

Our studies of amorphous calcium phosphate (ACP)-based materials over the last decade have yielded bioactive polymeric composites capable of protecting teeth from demineralization or even regenerating lost tooth mineral. The anti-cariogenic/re-mineralizing potential of these ACP composites originates from their propensity, when exposed to the oral environment, to release in a sustained manner sufficient levels of mineral-forming calcium and phosphate ions to promote formation of stable apatitic tooth mineral. However, the less than optimal ACP filler/resin matrix cohesion, excessive polymerization shrinkage and water sorption of these experimental materials can adversely affect their physicochemical and mechanical properties, and, ultimately, limit their lifespan. This study demonstrates the effects of chemical structure and composition of the methacrylate monomers used to form the matrix phase of composites on degree of vinyl conversion (DVC) and water sorption of both copolymers and composites and the release of mineral ions from the composites. Modification of ACP surface via introducing cations and/or polymers ab initio during filler synthesis failed to yield mechanically improved composites. However, moderate improvement in composite’s mechanical stability without compromising its remineralization potential was achieved by silanization and/or milling of ACP filler. Using ethoxylated bisphenol A dimethacrylate or urethane dimethacrylate as base monomers and adding moderate amounts of hydrophilic 2-hydroxyethyl methacrylate or its isomer ethyl-α-hydroxymethacrylate appears to be a promising route to maximize the remineralizing ability of the filler while maintaining high DVC. Exploration of the structure/composition/property relationships of ACP fillers and polymer matrices is complex but essential for achieving a better understanding of the fundamental mechanisms that govern dissolution/re-precipitation of bioactive ACP fillers, and, ultimately, the suitability of the composites for clinical evaluation.

Regression of post-orthodontic lesions by a remineralizing cream

Orthodontic patients have an increased risk of white-spot lesion formation. A clinical trial was conducted to test whether, in a post-orthodontic population using fluoride toothpastes and receiving supervised fluoride mouthrinses, more lesions would regress in participants using a remineralizing cream containing casein phosphopeptide- amorphous calcium phosphate compared with a placebo. Forty-five participants (aged 12-18 yrs) with 408 white-spot lesions were recruited, with 23 participants randomized to the remineralizing cream and 22 to the placebo. Product was applied twice daily after fluoride toothpaste use for 12 weeks. Clinical assessments were performed according to ICDAS II criteria. Transitions between examinations were coded as progressing, regressing, or stable. Ninety-two percent of lesions were assessed as code 2 or 3. For these lesions, 31% more had regressed with the remineralizing cream than with the placebo (OR = 2.3, P = 0.04) at 12 weeks. Significantly more post-orthodontic white-spot lesions regressed with the remineralizing cream compared with a placebo over 12 weeks.

Protective effect on enamel demineralization of a CPP-ACP paste: an AFM in vitro study

OBJECTIVES

The aim of the present in vitro study was the evaluation of a CPP-ACP paste (Tooth Mousse) on preventing dental erosion produced by a soft drink (Coca Cola), using Atomic Force Microscopy (AFM).

METHODS

Thirty extracted human central incisors free of caries were selected and divided in a treatment and a control half. The treatment halves were divided in three groups-group 1: demineralization with soft drink (4 intervals of 2 min); group 2: demineralization with soft drink (4 intervals of 2 min) plus Tooth Mousse; group 3: intact enamel plus Tooth Mousse. In groups 2 and 3 Tooth Mousse was applied for 3 min at 0, 8, 24 and 36 h. The surface of each specimen was imaged by AFM and R(rms) values were registered.

RESULTS

Among treatment specimens of groups 1 and 2, a statistically significant difference (P<0.01) in R(rms) values was registered: treatment of the specimens with CPP-ACP paste had a protective effect on enamel demineralization. In group 3 no statistically significant difference was registered between exposed and not exposed halves of the specimens.

CONCLUSIONS

The use of a CPP-ACP paste had a protective effect on enamel demineralization in an in vitro model.

Combining casein phosphopeptide-amorphous calcium phosphate with fluoride: synergistic remineralization potential of artificially demineralized enamel or not?

Recaldent is a product of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP). The remineralizing potential of CPP-ACP per se, or when combined with 0.22% Fl gel on artificially demineralized enamel using laser florescence, is investigated. Mesial surfaces of 15 sound human molars are tested using a He-Cd laser beam at 441.5 nm with 18-mW power as an excitation source on a suitable setup based on a Spex 750-M monochromator provided with a photomultiplier tube (PMT) for detection of collected autofluorescence from sound enamel. Mesial surfaces are subjected to demineralization for ten days. The spectra from demineralized enamel are measured. Teeth are divided into three groups according to the remineralizing regimen: group 1 Recaldent per se, group 2 Recaldent combined with fluoride gel and ACP, and group 3 artificial saliva as a positive control. After following these protocols for three weeks, the spectra from the remineralized enamel are measured. The spectra of enamel autofluorescence are recorded and normalized to peak intensity at about 540 nm to compare spectra from sound, demineralized, and remineralized enamel surfaces. A slight red shift occurred in spectra from demineralized enamel, while a blue shift may occur in remineralized enamel. Group 2 shows the highest remineralizing potential. Combining fluoride and ACP with CPP-ACP can give a synergistic effect on enamel remineralization.

Evidence-based caries, risk assessment, and treatment

Dental caries is a dietary and host-modified biofilm disease process, transmissible early in life that, if left untreated, will cause destruction of dental hard tissues. If allowed to progress, the disease will result in the development of caries lesions on tooth surfaces, which initially are noncavitated (eg, white spots), and eventually can progress to cavitation. The "medical model," where the etiologic disease-driving agents are balanced against protective factors, in combination with risk assessment, offers the possibility of patient-centered disease prevention and management before there is irreversible damage done to the teeth. This article discusses how to use evidence supporting risk assessment and management strategies for the caries process.