Aqueous two-phase system (ATPS): an overview and advances in its applications

Thermally-driven gold@poly(N-isopropylacrylamide) core-shell nanotransporters for molecular extraction

HYPOTHESIS

Molecular extraction efficiency can be boosted with the assistance of nanoparticles (NPs). It is based on adsorption of the extractants in one phase and desorption in another phase, which requires a reversible phase transfer of the NPs.

EXPERIMENTS

We synthesized the gold@poly(N-isopropylacryamide) (Au@PNIPAM) NPs via an interfacial self-assembly method enhanced by post-polymerization. We adopted Rhodamine 6G (R6G) as the model molecule for the extraction test. In comparison, UV-Vis extinction spectra were recorded to monitor the extraction processes with or without the Au@PNIPAM NPs. We further analyzed theoretically with thermodynamics and first-principle calculations.

FINDINGS

The hybrid Au@PNIPAM NPs show a reversible phase transfer between the interface and chloroform phases. The Au NPs assisted extraction efficiency of R6G shows 5 times higher than that without Au NPs. The thermodynamic analysis of the nanotransportation system agrees well with the ab initio density functional theory calculations. This nanoparticle-assisted molecular transportation modifies the extraction kinetics significantly, which will provide further implications for biphasic catalysis, pollutant treatment and drug delivery.

Separation of phenyl acetic acid and 6-aminopenicillanic acid applying aqueous two-phase systems based on copolymers and salts

6-Aminopenicillanic acid (6-APA) is used for synthesis of semisynthetic antibiotics. Polymer-salt aqueous two-phase systems (ATPSs) were applied for separation of 6-APA and phenyl acetic acid (PAA), as the products of hydrolyzation reaction of Penicillin G/Penicillin V. The binodal curves of ATPS composed of a copolymer (reverse Pluronic 10R5, Pluronic L35 and PEG-ran-PPG) and a salt (Tri-sodium citrate, tri-potassium citrate, di-potassium phosphate, sodium sulphate and magnesium sulphate) were obtained. The results show that, at a fixed PPG/PEG ratio, block copolymers have larger two-phase region compared with random copolymer. After screening on the partition coefficient of PAA and 6-APA separately, Na₂SO₄ was selected for studying the effect of the copolymer structure and the composition of salt and copolymer on partitioning, considering higher selectivity of PAA and 6-APA. 10R5-Na₂SO₄ ATPS was selected as the most appropriate system for separation of 6-APA and PAA. This system was used for separation of mixture of 6-APA and PAA. The results show that selectivity was \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\approx$$\end{document}≈ 53 and smaller in a system, containing a mixture of 6-APA and PAA. This observation can be justified by the interaction between 6-APA and PAA. Molecular interaction between these two molecules were investigated by the Flory–Huggins interaction parameter.

Liquid-liquid phase separation of full-length prion protein initiates conformational conversion in vitro

Prion diseases are characterized by the accumulation of amyloid fibrils. The causative agent is an infectious amyloid that comprises solely misfolded prion protein (PrP^Sc). Prions can convert normal cellular prion protein (PrP^C) to protease K-resistance prion protein fragment (PrP-res) in vitro; however, the intermediate steps involved in this spontaneous conversion still remain unknown. We investigated whether recombinant prion protein (rPrP) can directly convert into PrP-res via liquid-liquid phase separation (LLPS) in the absence of PrP^Sc. We found that rPrP underwent LLPS at the interface of the aqueous two-phase system of polyethylene glycol and dextran, whereas single-phase conditions were not inducible. Fluorescence recovery assay after photobleaching revealed that the liquid-solid phase transition occurred within a short time. The aged rPrP-gel acquired a proteinase-resistant amyloid accompanied by β-sheet conversion, as confirmed by Western blotting, Fourier transform infrared spectroscopy, and Congo red staining. The reactions required both the N-terminal region of rPrP (amino acids 23-89) and kosmotropic salts, suggesting that the kosmotropic anions may interact with the N-terminal region of rPrP to promote LLPS. Thus, structural conversion via LLPS and liquid-solid phase transition could be the intermediate steps in the conversion of prions.

An aqueous two-phase system formed in single-component solution of α-ketooctanoic acid

An aqueous two-phase system can form in the single-component solution of α-ketooctanoic acid without any additives.

Polysaccharide nanoparticles: from fabrication to applications

The present review highlights the developments in polysaccharide nanoparticles with a particular focus on applications in biomedicine, cosmetics and food.

Connecting primitive phase separation to biotechnology, synthetic biology, and engineering

One aspect of the study of the origins of life focuses on how primitive chemistries assembled into the first cells on Earth and how these primitive cells evolved into modern cells. Membraneless droplets generated from liquid-liquid phase separation (LLPS) are one potential primitive cell-like compartment; current research in origins of life includes study of the structure, function, and evolution of such systems. However, the goal of primitive LLPS research is not simply curiosity or striving to understand one of life's biggest unanswered questions, but also the possibility to discover functions or structures useful for application in the modern day. Many applicational fields, including biotechnology, synthetic biology, and engineering, utilize similar phaseseparated structures to accomplish specific functions afforded by LLPS. Here, we briefly review LLPS applied to primitive compartment research and then present some examples of LLPS applied to biomolecule purification, drug delivery, artificial cell construction, waste and pollution management, and flavor encapsulation. Due to a significant focus on similar functions and structures, there appears to be much for origins of life researchers to learn from those working on LLPS in applicational fields, and vice versa, and we hope that such researchers can start meaningful cross-disciplinary collaborations in the future.

Optimization of ultrasound-assisted aqueous two phase extraction of polyphenols from olive leaves

In this study, polyphenols from olive leaves was extracted by ultrasound-assisted aqueous two phase extraction (UAATPE). Based on single factor experiment and response surface methodology (RSM), the optimum extraction conditions of polyphenols contained 29% (w/w) (NH₄)₂SO₄, 35% (w/w) ethanol, pH 6.7, and 45 °C. The maximum extraction yield of polyphenols and oleuropein content were 34.06 mg/g and 44.13 mg/L, respectively. Compared with ultrasound-assisted extraction (UAE) and aqueous two phase extraction (ATPE), the extraction yield of polyphenols by UAATPE was 9.48 and 61.19% higher, respectively. In addition, the extract of UAATPE had higher purity. The results of antioxidant activity showed that polyphenols extracted by UAATPE had stronger DPPH and hydroxyl radicals scavenging ability and reducing power. Therefore, UAATPE is an efficient method for extracting polyphenols from olive leaves.

Structure-based mechanisms: On the way to apply alcohol dehydrogenases/reductases to organic-aqueous systems

Alcohol dehydrogenases/reductases catalyze enantioselective syntheses of versatile chiral compounds relying on direct hydride transfer from cofactor to substrates, or to an intermediate and then to substrates. Since most of the substrates catalyzed by alcohol dehydrogenases/reductases are insoluble in aqueous solutions, increasing interest has been turning to organic-aqueous systems. However, alcohol dehydrogenases/reductases are normally instable in organic solvents, leading to the unsatisfied enantioselective synthesis efficiency. The behaviors of these enzymes in organic solvents at an atomic level are unclear, thus it is of great importance to understand its structure-based mechanisms in organic-aqueous systems to improve their relative stability. Here, we summarized the accessible structures of alcohol dehydrogenases/reductases in Protein Data Bank crystallized in organic-aqueous systems, and compared the structures of alcohol dehydrogenases/reductases which have different tolerance towards organic solvents. By understanding the catalytic behaviors and mechanisms of these enzymes in organic-aqueous systems, the efficient enantioselective syntheses mediated by alcohol dehydrogenases/reductases and further challenges are also discussed through solvent engineering and enzyme-immobilization in the last decade.

Catalysis in Pickering emulsions

Particle-stabilised or Pickering emulsions are versatile systems. In the past 10 years a new application has emerged in the field of catalysis to use them as vehicles to carry out catalytic reactions, allowing a more environmentally friendly process with high conversions and selectivities and important advantages for catalyst recovery. As the area has advanced rapidly, the intention of this review is to summarize the latest innovations being reported. An overview is given regarding the kinds of liquid phases comprising the emulsion system, the different types of solid particle stabilizers (whether they contain catalyst or not) and the catalytic reactions studied. A section describing methods for recovering the catalyst is also included, in which various stimuli are discussed. Finally, the importance of using Pickering emulsions to carry out reactions in flow and in multi-step cascade systems is highlighted with various examples to support the benefits of transferring this technology to industrial processes.

Advanced biomedical applications based on emerging 3D cell culturing platforms

It is of great value to develop reliable in vitro models for cell biology and toxicology. However, ethical issues and the decreasing number of donors restrict the further use of traditional animal models in various fields, including the emerging fields of tissue engineering and regenerative medicine. The huge gap created by the restrictions in animal models has pushed the development of the increasingly recognized three-dimensional (3D) cell culture, which enables cells to closely simulate authentic cellular behaviour such as close cell-to-cell interactions and can achieve higher functionality. Furthermore, 3D cell culturing is superior to the traditional 2D cell culture, which has obvious limitations and cannot closely mimic the structure and architecture of tissues. In this study, we review several methods used to form 3D multicellular spheroids. The extracellular microenvironment of 3D spheroids plays a role in many aspects of biological sciences, including cell signalling, cell growth, cancer cell generation, and anti-cancer drugs. More recently, they have been explored as basic construction units for tissue and organ engineering. We review this field with a focus on the previous research in different areas using spheroid models, emphasizing aqueous two-phase system (ATPS)-based techniques. Multi-cellular spheroids have great potential in the study of biological systems and can closely mimic the in vivo environment. New technologies to form and analyse spheroids such as the aqueous two-phase system and magnetic levitation are rapidly overcoming the technical limitations of spheroids and expanding their applications in tissue engineering and regenerative medicine.

Aqueous Two-Phase-Assisted Precipitation of Proteins: A Platform for Isolation of Process-Related Impurities from Therapeutic Proteins

Aqueous two-phase systems (ATPS) have been widely and successfully used in the purification of various biological macromolecules such as proteins, nucleic acids, antibiotics, and cell components. Interfacial precipitation of the product often results in lower recovery and selectivity of ATPS. Efficient resolubilization of the interfacial precipitate offers a way to improve the recovery as well as selectivity of ATPS systems.In this protocol, we describe a method for aqueous two-phase-assisted precipitation and resolubilization of the recombinant human Granulocyte Colony Stimulating Factor (GCSF) for its selective isolation from E. coli host cell proteins as well as nucleic acids. This platform purification can be applied to other cytokines as well as most of the hydrophobic proteins that partition into the hydrophobic PEG-rich top phase. Recoveries of up to 100% of the product along with reduction of levels of E. coli host cell proteins (from 250-500 to 10-15 ppm) and of nucleic acids (from 15-20 to 5-15 ng/mL) were observed.

Freeform 3D printing of soft matters: recent advances in technology for biomedical engineering

In the last decade, an emerging three-dimensional (3D) printing technique named freeform 3D printing has revolutionized the biomedical engineering field by allowing soft matters with or without cells to be printed and solidified with high precision regardless of their poor self-supportability. The key to this freeform 3D printing technology is the supporting matrices that hold the printed soft ink materials during omnidirectional writing and solidification. This approach not only overcomes structural design restrictions of conventional layer-by-layer printing but also helps to realize 3D printing of low-viscosity or slow-curing materials. This article focuses on the recent developments in freeform 3D printing of soft matters such as hydrogels, cells, and silicone elastomers, for biomedical engineering. Herein, we classify the reported freeform 3D printing systems into positive, negative, and functional based on the fabrication process, and discuss the rheological requirements of the supporting matrix in accordance with the rheological behavior of counterpart inks, aiming to guide development and evaluation of new freeform printing systems. We also provide a brief overview of various material systems used as supporting matrices for freeform 3D printing systems and explore the potential applications of freeform 3D printing systems in different areas of biomedical engineering.

Isolation of extracellular vesicles from small volumes of plasma using a microfluidic aqueous two-phase system

As conventional bulky methods for extracellular vesicle (EV) separation are unsuitable for small volumes of samples, microfluidic devices are thought to offer a solution for the integrated and automatic processing of EV separation. This study demonstrates a simple microfluidic aqueous two-phase system (ATPS) for EV separation with high recovery efficiency to overcome the limitation of previous devices, which require complex external equipment or high cost manufacturing. With polyethylene glycol and dextran in the microfluidic channel, the isolation mechanism of the microfluidic ATPS was analyzed by comparison between two-phase and one-phase systems. Our device could facilitate continuous EV isolation with 83.4% recovery efficiency and remove 65.4% of the proteins from the EV-protein mixture. EVs were also successfully isolated from human plasma at high recovery efficiency.

Application of aqueous two-phase system for selective extraction and clean-up of emerging contaminants from aqueous matrices

This review approaches how aqueous two-phase systems (ATPS), in their various compositions (e.g., polymer + salt, copolymer + salt, ionic liquid + salt, acetonitrile + salt), can be efficiently used for extraction, preconcentration, and clean-up of analytes in aqueous samples to determine the compounds classified as emerging contaminants (ECs). In the literature, there are some studies using ATPS applied to ECs, like pesticides, pharmaceuticals, illicit drugs, personal care products, alkaloids, and hormones, even when in trace concentrations. The ATPS is an alternative to the conventional liquid-liquid extraction technique. However, it is predominantly composed of water and do not generally use organic solvents and, therefore, is based on the principles of green chemistry. An ATPS approach has a unique advantage because it can extract neutral, anionic, cationic, polar, and nonpolar compounds, even when present simultaneously in the same sample. This review covers how this simple and low environmental impact technique has been employed for the analysis of different classes of emerging contaminants.

In situ product recovery techniques aiming to obtain biotechnological products: A glance to current knowledge

Biotechnology and bioengineering techniques have been widely used in the production of biofuels, chemicals, pharmaceuticals, and food additives, being considered a "green" form of production because they use renewable and nonpolluting energy sources. On the other hand, in the traditional processes of production, the target product obtained by biotechnological routes must undergo several stages of purification, which makes these processes more expensive. In the past few years, some works have focused on processes that integrate fermentation to the recovery and purification steps necessary to obtain the final product required. This type of process is called in situ product recovery or extractive fermentation. However, there are some differences in the concepts of the techniques used in these bioprocesses. In this way, this review sought to compile relevant content on considerations and procedures that are being used in this field, such as evaporation, liquid-liquid extraction, permeation, and adsorption techniques. Also, the objective of this review was to approach the different configurations in the recent literature of the processes employed and the main bioproducts obtained, which can be used in the food, pharmaceutical, chemical, and/or fuel additives industry. We intended to elucidate concepts of these techniques, considered very recent, but which emerge as a promising alternative for the integration of bioprocesses.

Thermoelectric Properties of Thin Films from Sorted Single-Walled Carbon Nanotubes

Single-walled carbon nanotubes (SWCNTs) remain one of the most promising materials of our times. One of the goals is to implement semiconducting and metallic SWCNTs in photonics and microelectronics, respectively. In this work, we demonstrated how such materials could be obtained from the parent material by using the aqueous two-phase extraction method (ATPE) at a large scale. We also developed a dedicated process on how to harvest the SWCNTs from the polymer matrices used to form the biphasic system. The technique is beneficial as it isolates SWCNTs with high purity while simultaneously maintaining their surface intact. To validate the utility of the metallic and semiconducting SWCNTs obtained this way, we transformed them into thin free-standing films and characterized their thermoelectric properties.

Chiral Ionic Liquids: Structural Diversity, Properties and Applications in Selected Separation Techniques

Ionic liquids (ILs) are chemical compounds composed of ions with melting points below 100 °C exhibiting a design feature. ILs are commonly used as the so-called green solvents, reagents or highly efficient catalysts in varied chemical processes. The huge application potential of ionic liquids (IL) justifies the growing interest in these compounds. In the last decade, increasing attention has been devoted to the development of new methods in the synthesis of stable chiral ionic liquids (CILs) and their application in various separation techniques. The beginnings of the successful use of CILs to separate enantiomers date back to the 1990 s. Most chiral ILs are based on chiral cations or chiral anions. There is also a limited number of CILs possessing both a chiral cation and a chiral anion. Due to the high molecular diversity of both ions, of which at least one has a chiral center, we have the possibility to design a large variety of optically active structures, thus expanding the range of CIL applications. Research utilizing chiral ionic liquids only recently has become more popular. However, it is the area that still has great potential for future development. This review aimed to describe the diversity of structures, properties and examples of applications of chiral ionic liquids as new chiral solid materials and chiral components of the anisotropic environment, providing chiral recognition of enantiomeric analytes, which is useful in liquid chromatography, countercurrent chromatography and other various CIL-based extraction techniques including aqueous biphasic (ABS) extraction systems, solid-liquid two-phase systems, liquid-liquid extraction systems with hydrophilic CILs, liquid-liquid extraction systems with hydrophobic CILs, solid-phase extraction and induced-precipitation techniques developed in the recent years. The growing demand for pure enantiomers in the pharmaceutical and food industries sparks further development in the field of extraction and separation systems modified with CILs highlighting them as affordable and environmentally friendly both chiral selectors and solvents.

Sequential extraction and enrichment of pesticide residues in Longan fruit by ultrasonic-assisted aqueous two-phase extraction linked to vortex-assisted dispersive liquid-liquid microextraction prior to high performance liquid chromatography analysis

A simple, green and efficient method for extraction, purification and enrichment of pesticide residues of triazoles and pyrethroids in Longan fruit was developed by ultrasonic-assisted aqueous two-phase extraction (UAATPE) coupled to vortex-assisted dispersive liquid-liquid microextraction (VADLLME). Using an aqueous two-phase system (ATPS) of ethanol/K₂HPO₄ as extraction solvent, the composition of the ATPS, extraction temperature and time were investigated, respectively. Then VADLLME process also was optimized by investigating type and volume of extracting and dispersive solvents, vortex-assisted time and salt addition. The optimum conditions were as follows: the ATPS composition of ethanol concentration 30.0% (w/w) and K₂HPO₄ concentration 25% (w/w), extraction temperature 70 °C and extraction time 15 min for UAATPE; 1-dodecanol 200 μL as extraction solvent, ethanol 1.25 mL as dispersive solvent, vortex-assisted time 1.5 min and addition of NaCl 4% (w/v) for VADLLME. Ethanol as extraction solvent and dispersive solvent could directly connect UAATPE with VADLLME without extra steps. By means of HPLC-DAD detection, nine pesticides had good linearity ranged from 0.0200 to 13.59 μg/mL (R² ≥ 0.9957). LODs and LOQs were in the range of 0.005576-0.01740 μg/mL and 0.01859-0.05010 μg/mL, respectively. UAATPE-VADLLME coupled to HPLC was successfully applied to simultaneous determination of multiple pesticides in Longan fruit, and mean recoveries and RSDs were between 76.95% and 98.63%, 1.2% and 9.8%, respectively. Furthermore, myclobutanil, fenpropathrin and deltamethrin were detected in pericarp and pulp of Longan samples from different districts, respectively.

Fungi as a Potential Source of Pigments: Harnessing Filamentous Fungi

The growing concern over the harmful effects of synthetic colorants on both the consumer and the environment has raised a strong interest in natural coloring alternatives. As a result the worldwide demand for colorants of natural origin is rapidly increasing in the food, cosmetic and textile sectors. Natural colorants have the capacity to be used for a variety of industrial applications, for instance, as dyes for textile and non-textile substrates such as leather, paper, within paints and coatings, in cosmetics, and in food additives. Currently, pigments and colorants produced through plants and microbes are the primary source exploited by modern industries. Among the other non-conventional sources, filamentous fungi particularly ascomycetous and basidiomycetous fungi (mushrooms), and lichens (symbiotic association of a fungus with a green alga or cyanobacterium) are known to produce an extraordinary range of colors including several chemical classes of pigments such as melanins, azaphilones, flavins, phenazines, and quinines. This review seeks to emphasize the opportunity afforded by pigments naturally found in fungi as a viable green alternative to current sources. This review presents a comprehensive discussion on the capacity of fungal resources such as endophytes, halophytes, and fungi obtained from a range or sources such as soil, sediments, mangroves, and marine environments. A key driver of the interest in fungi as a source of pigments stems from environmental factors and discussion here will extend on the advancement of greener extraction techniques used for the extraction of intracellular and extracellular pigments. The search for compounds of interest requires a multidisciplinary approach and techniques such as metabolomics, metabolic engineering and biotechnological approaches that have potential to deal with various challenges faced by pigment industry.

Biological phase separation: cell biology meets biophysics

Progress in development of biophysical analytic approaches has recently crossed paths with macromolecule condensates in cells. These cell condensates, typically termed liquid-like droplets, are formed by liquid-liquid phase separation (LLPS). More and more cell biologists now recognize that many of the membrane-less organelles observed in cells are formed by LLPS caused by interactions between proteins and nucleic acids. However, the detailed biophysical processes within the cell that lead to these assemblies remain largely unexplored. In this review, we evaluate recent discoveries related to biological phase separation including stress granule formation, chromatin regulation, and processes in the origin and evolution of life. We also discuss the potential issues and technical advancements required to properly study biological phase separation.