Hybrid nanoparticles for detection and treatment of cancer

Magnetically responsive microflaps reveal cell membrane boundaries from multiple angles

A microflap system to incline adherent cells in the desired orientation is described. Inclination angles of cell-laden microflaps are precisely controlled by the applied magnetic field, enabling us to observe cell-membrane boundaries from multiple angles. This system is equipped with conventional microscopes, allowing clear focused images of cell-membrane boundaries to be obtained with high magnification.

Oxidation-Induced Trapping of Drugs in Porous Silicon Microparticles

An approach for the preparation of an oxidized porous silicon microparticle drug delivery system that can provide efficient trapping and sustained release of various drugs is reported. The method uses the contraction of porous silicon's mesopores, which occurs during oxidation of the silicon matrix, to increase the loading and retention of drugs within the particles. First, a porous Si (pSi) film is prepared by electrochemical etching of p-type silicon with a resistivity of >0.65 Ω cm in a 1:1 (v/v) HF/ethanol electrolyte solution. Under these conditions, the pore walls are sufficiently thin to allow for complete oxidation of the silicon skeleton under mild conditions. The pSi film is then soaked in an aqueous solution containing the drug (cobinamide or rhodamine B test molecules were used in this study) and sodium nitrite. Oxidation of the porous host by nitrite results in a shrinking of the pore openings, which physically traps the drug in the porous matrix. The film is subsequently fractured by ultrasonication into microparticles. Upon comparison with commonly used oxidizing agents for pSi such as water, peroxide, and dimethyl sulfoxide, nitrite is kinetically and thermodynamically sufficient to oxidize the pore walls of the pSi matrix, precluding reductive (by Si) or oxidative (by nitrite) degradation of the drug payload. The drug loading efficiency is significantly increased (by up to 10-fold), and the release rate is significantly prolonged (by 20-fold) relative to control samples in which the drug is loaded by infiltration of pSi particles postoxidation. We find that it is important that the silicon skeleton be completely oxidized to ensure the drug is not reduced or degraded by contact with elemental silicon during the particle dissolution-drug release phase.

Folic acid-conjugated silica-coated gold nanorods and quantum dots for dual-modality CT and fluorescence imaging and photothermal therapy

Multifunctional nanoparticles (NPs) have great potential for multimodal cancer imaging and effective therapy. We have developed multifunctional NPs (GNR@SiO₂@QDs) by incorporating gold nanorods (GNRs) and CdSe/ZnS quantum dots (QDs) into silica. Folic acid (FA) as a targeting ligand was covalently conjugated on the surfaces of GNR@SiO₂@QDs with a silane coupling agent. Cell viability assay showed that these NPs had low cytotoxicity. And confocal fluorescence images illustrated that they could selectively target HeLa cells overexpressing folate receptors (FRs) rather than FR-deficient A549 cells. In vitro cell imaging experiments revealed that these NPs exhibited strong X-ray attenuation for X-ray computed tomography (CT) imaging and strong fluorescence for fluorescence imaging. They also showed an enhanced photothermal therapy (PTT) effect for cancer cells due to GNRs' high absorption coefficient in the near infrared (NIR) region and a better heat generation rate. All results show that they have great potential in theranostic applications such as for targeted tumor imaging and therapy.

Multifunctional nanoparticles for brain tumor imaging and therapy

Brain tumors are a diverse group of neoplasms that often carry a poor prognosis for patients. Despite tremendous efforts to develop diagnostic tools and therapeutic avenues, the treatment of brain tumors remains a formidable challenge in the field of neuro-oncology. Physiological barriers including the blood-brain barrier result in insufficient accumulation of therapeutic agents at the site of a tumor, preventing adequate destruction of malignant cells. Furthermore, there is a need for improvements in brain tumor imaging to allow for better characterization and delineation of tumors, visualization of malignant tissue during surgery, and tracking of response to chemotherapy and radiotherapy. Multifunctional nanoparticles offer the potential to improve upon many of these issues and may lead to breakthroughs in brain tumor management. In this review, we discuss the diagnostic and therapeutic applications of nanoparticles for brain tumors with an emphasis on innovative approaches in tumor targeting, tumor imaging, and therapeutic agent delivery. Clinically feasible nanoparticle administration strategies for brain tumor patients are also examined. Furthermore, we address the barriers towards clinical implementation of multifunctional nanoparticles in the context of brain tumor management.

Multifunctional plasmonic nanorattles for spectrum-guided locoregional therapy

Locoregional death of cancer cells (in vitro) is induced by ablation of plasmonic nanorattles combined with triggered release of a chemotherapeutic drug from the nanorattles. Completion of the therapy process is indicated by a "Raman signal flip" between the two reporters of the surface-enhanced Raman scattering (SERS) probe. The nanorattles enable targeted delivery of payload and simultaneous monitoring of the payload release and the therapy process.

Polyhedral oligomeric silsesquioxane-F68 hybrid vesicles for folate receptor targeted anti-cancer drug delivery

Polyhedral Oligomeric Silsesquioxane (POSS)-F68 hybrid vesicles with an average diameter of 700 nm are produced using a stable solution of heterofunctional POSS having 3-aminopropyl and vinyl groups and pluronic F68 in ethanol-water mixture. Thermogram and zeta potential values evidence the spontaneous self-assembly of POSS into bilayers through H-bonding interaction between the aminopropyl groups, and the effective stabilization of the POSS-bilayers by amphiphilic F68 during solvent-evaporation to form the vesicles. The vesicles are noncytotoxic and dispersible in aqueous solvents through steric stabilization provided by the hydrophilic F68. A highly facile coinclusion method has been used for making doxorubicin and folic acid loaded vesicles. Doxorubicin loaded in the vesicles exhibits a controlled release profile in phosphate buffered saline. Confocal microscopic and flow cytometric studies on the endocytosis of the vesicles by HeLa and HOS cells prove that a noncovalent entrapment of excess folic acid in the vesicles through H-bonding is sufficient to enhance the uptake significantly. POSS-F68 vesicles in combination with folic acid and a chemotherapeutic can have potential for targeted intracellular anti-cancer drug delivery.

A fluorescence-Raman dual-imaging platform based on complexes of conjugated polymers and carbon nanotubes

The present study describes a flexible nanoplatform based on electrostatic assembly of conjugated polyelectrolytes (CPEs) and carboxylated multi-walled carbon nanotubes (cMWNTs). It is demonstrated that the obtained nanocomposites inherit intrinsic optical properties of CPEs and characteristic Raman vibration modes of MWNTs, providing a fluorescence-Raman dual-imaging method for intracellular tracking and locating of MWNTs. We suggest that the cellular internalization of the CPE-cMWNT nanocomposites is a surface charge-dependent process. The strengths of this nanoplatform include satisfying biocompatibility, enhanced protein-repellent property, and ease of implementation, making it available for both in vitro and in vivo applications.

Magnetic iron oxide–fluorescent carbon dots integrated nanoparticles for dual-modal imaging, near-infrared light-responsive drug carrier and photothermal therapy

The multifunctional hybrid nanoparticles described demonstrate great promise towards advanced nanoplatforms for simultaneous imaging diagnostics and high efficacy therapy.

Diatomite silica nanoparticles for drug delivery

Diatomite is a natural fossil material of sedimentary origin, constituted by fragments of diatom siliceous skeletons. In this preliminary work, the properties of diatomite nanoparticles as potential system for the delivery of drugs in cancer cells were exploited. A purification procedure, based on thermal treatments in strong acid solutions, was used to remove inorganic and organic impurities from diatomite and to make them a safe material for medical applications. The micrometric diatomite powder was reduced in nanoparticles by mechanical crushing, sonication, and filtering. Morphological analysis performed by dynamic light scattering and transmission electron microscopy reveals a particles size included between 100 and 300 nm. Diatomite nanoparticles were functionalized by 3-aminopropyltriethoxysilane and labeled by tetramethylrhodamine isothiocyanate. Different concentrations of chemically modified nanoparticles were incubated with cancer cells and confocal microscopy was performed. Imaging analysis showed an efficient cellular uptake and homogeneous distribution of nanoparticles in cytoplasm and nucleus, thus suggesting their potentiality as nanocarriers for drug delivery.

PACS

87.85.J81.05.Rm; 61.46. + w.

A monomeric photosensitizer for targeted cancer therapy

A targeted photosensitizer used in photodynamic therapy (PDT) was fabricated by incorporation of zinc phthalocyanine (ZnPc) and folic acid (FA) into polyvinylpyrrolidone (PVP) micelles, which exhibits excellent anticancer performance revealed by both in vitro studies and in vivo tests.

Quintuple-modality (SERS-MRI-CT-TPL-PTT) plasmonic nanoprobe for theranostics

A unique quintuple-modality theranostic nanoprobe (QMT) is developed with gold nanostars for surface-enhanced Raman scattering (SERS), magnetic resonance imaging (MRI), computed tomography (CT), two-photon luminescence (TPL) imaging and photothermal therapy (PTT). The synthesized gold nanostars were tagged with a SERS reporter and linked with an MRI contrast agent Gd(3+). In vitro experiments demonstrated the developed QMT nanoprobe to be a potential theranostic agent for future biomedical applications.

Upconverting and NIR emitting rare earth based nanostructures for NIR-bioimaging

In recent years, significant progress was achieved in the field of nanomedicine and bioimaging, but the development of new biomarkers for reliable detection of diseases at an early stage, molecular imaging, targeting and therapy remains crucial. The disadvantages of commonly used organic dyes include photobleaching, autofluorescence, phototoxicity and scattering when UV (ultraviolet) or visible light is used for excitation. The limited penetration depth of the excitation light and the visible emission into and from the biological tissue is a further drawback with regard to in vivo bioimaging. Lanthanide containing inorganic nanostructures emitting in the near-infrared (NIR) range under NIR excitation may overcome those problems. Due to the outstanding optical and magnetic properties of lanthanide ions (Ln(3+)), nanoscopic host materials doped with Ln(3+), e.g. Y2O3:Er(3+),Yb(3+), are promising candidates for NIR-NIR bioimaging. Ln(3+)-doped gadolinium-based inorganic nanostructures, such as Gd2O3:Er(3+),Yb(3+), have a high potential as opto-magnetic markers allowing the combination of time-resolved optical imaging and magnetic resonance imaging (MRI) of high spatial resolution. Recent progress in our research on over-1000 nm NIR fluorescent nanoprobes for in vivo NIR-NIR bioimaging will be discussed in this review.

A general route towards well-defined magneto- or fluorescent-plasmonic nanohybrids

Herein, we present a general route towards defined nanohybrids, comprised of a fluorescent quantum dot (QD) or superparamagnetic iron oxide (Fe2O3) nanocrystal core and a tuneable corona of plasmonic gold or silver nanoparticles (NPs), adhered by a cross-linked poly(isoprene)-b-poly(ethylene glycol) diblock copolymer (PI-b-PEG) matrix. To this end, the PEG-terminus of the amphiphilic polymer was acylated with lipoic acid (LA), which, as is known, forms quasi-covalent Au-thiol- or Ag-thiol-bonds. Surprisingly, by variation of the ratio of the different NPs, inverse core/satellite structures bearing QDs or Fe2O3 around a metallic NP core were obtained. Furthermore, gold NPs or even closed gold shells were grown by in situ reductive deposition of Au(3+) ions on Fe2O3 NP seeds. Finally, in order to demonstrate the scope of the method, ternary nanohybrids, composed of QDs, Fe2O3 and Au NPs, were accomplished. All magneto-plasmonic and fluorescent-plasmonic materials were thoroughly characterized by absorption and emission spectroscopy, TEM and TEM-EDX. Antibody conjugation to these novel nanohybrids proved their practical utility in a prototype immunoassay.

A computational framework for identifying design guidelines to increase the penetration of targeted nanoparticles into tumors

Targeted nanoparticles are increasingly being engineered for the treatment of cancer. By design, they can passively accumulate in tumors, selectively bind to targets in their environment, and deliver localized treatments. However, the penetration of targeted nanoparticles deep into tissue can be hindered by their slow diffusion and a high binding affinity. As a result, they often localize to areas around the vessels from which they extravasate, never reaching the deep-seeded tumor cells, thereby limiting their efficacy. To increase tissue penetration and cellular accumulation, we propose generalizable guidelines for nanoparticle design and validate them using two different computer models that capture the potency, motion, binding kinetics, and cellular internalization of targeted nanoparticles in a section of tumor tissue. One strategy that emerged from the models was delaying nanoparticle binding until after the nanoparticles have had time to diffuse deep into the tissue. Results show that nanoparticles that are designed according to these guidelines do not require fine-tuning of their kinetics or size and can be administered in lower doses than classical targeted nanoparticles for a desired tissue penetration in a large variety of tumor scenarios. In the future, similar models could serve as a testbed to explore engineered tissue-distributions that arise when large numbers of nanoparticles interact in a tumor environment.

Carbon nanotubes in hyperthermia therapy

Thermal tumor ablation therapies are being developed with a variety of nanomaterials, including single- and multiwalled carbon nanotubes. Carbon nanotubes (CNTs) have attracted interest due to their potential for simultaneous imaging and therapy. In this review, we highlight in vivo applications of carbon nanotube-mediated thermal therapy (CNMTT) and examine the rationale for use of this treatment in recurrent tumors or those resistant to conventional cancer therapies. Additionally, we discuss strategies to localize and enhance the cancer selectivity of this treatment and briefly examine issues relating the toxicity and long term fate of CNTs.

pH-responsive gold nanoparticles-in-liposome hybrid nanostructures for enhanced systemic tumor delivery

We report a pH-responsive gold nanoparticles-in-liposome hybrid nanostructure, which effectively combines the pH-responsive assembly and surface plasmon property changes of 'smart' gold nanoparticles and enhanced systemic circulation and tumor accumulation of the PEG-grafted liposomes.

Magnetically triggered dual functional nanoparticles for resistance-free apoptotic hyperthermia

Overcoming resistance: Heat-treated cancer cells possess a protective mechanism for resistance and survival. Resistance-free apoptosis-inducing magnetic nanoparticles (RAINs) successfully promote hyperthermic apoptosis, obstructing cell survival by triggering two functional units of heat generation and the release of geldanamycin (GM) for heat shock protein (Hsp) inhibition under an alternating magnetic field (AMF).

Controlling the actuation of therapeutic nanomaterials: enabling nanoparticle-mediated drug delivery

The implementation of biofunctionalized nanoparticles (NPs) as potential therapeutic materials has seen exponential growth in recent years due to their unique ability to overcome the constraints of current medicine. This has been largely driven by significant advances on a number of basic research fronts including high-quality NP synthesis, bioconjugation, cellular delivery and the controlled release or ‘actuation’ of NP-associated cargos. Cumulatively, these are the key enabling tools for the full realization of NP-mediated drug delivery. In this review, the authors’ focus is on recent developments in methodologies for the controlled actuation of therapeutic NPs. The authors discuss the critical requirements for their integration into biological systems and highlight examples from the recent literature where controlled NP actuation has been successfully demonstrated. The current state of therapeutic NPs in the clinical setting is summarized and the article concludes with a brief perspective of how we can expect to see this emerging field develop in the coming years.

From formation mechanisms to synthetic methods toward shape-controlled oxide nanoparticles

Metal oxide nanomaterials have been intensively pursued for modern science and nanotechnology. Control over the size and shape of the oxide nanoparticles enables tunability of their unique properties sought for many useful applications. This review presents a comprehensive overview of the recent advances in the shape-controlled synthesis of colloidal oxide nanoparticles. We introduce the size- and shape-dependent properties of the oxide nanoparticles along with their potential applications and subsequent descriptions of the kinetic regime concepts of the formation of the monodisperse nanocolloids. Variations of the experimental conditions including capping molecules, precursor monomer concentration, and reaction temperature/aging have been explored to control the shape of the oxide nanoparticles in wet-chemistry syntheses. The different capping molecule-assisted synthetic methods of the hydro-solvothermal route, the two-phase route, heating-up thermolysis, and reverse micelle are presented as a collection of clear examples of the regular oxide nanoparticles. We also discuss the advantages and obstacles of the synthetic methods that have proven to be controllable and reproducible. The author concludes this review with valuable portraits on working hypotheses for the shape-controlled oxide nanoparticle synthesis.

ZnO nanoparticles applied to bioimaging and drug delivery

The last decade has seen significant achievements in biomedical diagnosis and therapy at the levels of cells and molecules. Nanoparticles with luminescent or magnetic properties are used as detection probes and drug carriers, both in vitro and in vivo. ZnO nanoparticles, due to their good biocompatibility and low cost, have shown promising potential in bioimaging and drug delivery. The recent exciting progress on the biomedical applications of ZnO-based nanomaterials is reviewed here, along with discussions on the advantages and limitations of these advanced materials and suggestions for improving methods.

Enzyme-coated mesoporous silica nanoparticles as efficient antibacterial agents in vivo

Despite the fact that pathogenic infections are widely treated by antibiotics in the clinic nowadays, the increasing risk of multidrug-resistance associated with abuse of antibiotics is becoming a major concern in global public health. The increased death toll caused by pathogenic bacterial infection calls for effective antibiotic alternatives. Lysozyme-coated mesoporous silica nanoparticles (MSNs⊂Lys) are reported as antibacterial agents that exhibit efficient antibacterial activity both in vitro and in vivo with low cytotoxicity and negligible hemolytic side effect. The Lys corona provides multivalent interaction between MSNs⊂Lys and bacterial walls and consequently raises the local concentration of Lys on the surface of cell walls, which promotes hydrolysis of peptidoglycans and increases membrane-perturbation abilities. The minimal inhibition concentration (MIC) of MSNs⊂Lys is fivefold lower than that of free Lys in vitro. The antibacterial efficacy of MSNs⊂Lys is evaluated in vivo by using an intestine-infected mouse model. Experimental results indicate that the number of bacteria surviving in the colon is three orders of magnitude lower than in the untreated group. These natural antibacterial enzyme-modified nanoparticles open up a new avenue for design and synthesis of next-generation antibacterial agents as alternatives to antibiotics.

Near-infrared light-mediated nanoplatforms for cancer thermo-chemotherapy and optical imaging

While thermo-chemotherapy has proved to be effective in optimizing the efficacies of cancer treatments, traditional chemotherapy is subject to adverse side effects and heat delivery is often challenging in operation. Some photothermal inorganic nanoparticles responsive to near infrared light provide new opportunities for simultaneous and targeted delivery of heat and chemotherapeutics to the tumor sites in pursuit of synergistic effects for efficacy enhancement. The state of the art of nanoparticle-induced thermo-chemotherapy is summarized and the advantages and challenges of the major nanoplatforms based on gold nanoparticles, carbon nanomaterials, palladium nanosheets, and copper-based nanocrystals are highlighted. In addition, the optical-imaging potentials of the nanoplatforms that may endow them with imaging-guided therapy and therapeutic-result-monitoring capabilities are also briefly discussed.

Host-guest supramolecular nanosystems for cancer diagnostics and therapeutics

Extensive efforts have been devoted to the construction of functional supramolecular nanosystems for applications in catalysis, energy conversion, sensing and biomedicine. The applications of supramolecular nanosystems such as liposomes, micelles, inorganic nanoparticles, carbon materials for cancer diagnostics and therapeutics have been reviewed by other groups. Here, we will focus on the recent momentous advances in the implementation of typical supramolecular hosts (i.e., cyclodextrins, calixarenes, cucurbiturils and metallo-hosts) and their nanosystems in cancer diagnostics and therapeutics. We discuss the evolutive process of supramolecular nanosystems from the structural control and characterization to their diagnostic and therapeutic function exploitation and even the future potentials for clinical translation.

Multifunctional PEGylated nanoclusters for biomedical applications

A simple and versatile synthesis method to form water soluble multifunctional nanoclusters using polyethylene glycol (PEG) functionalized poly(maleic anhydride-alt-1-octadecene) amphiphilic brush copolymers (PMAO-g-PEG) was presented. Simply by tuning the core size and the initial nanocrystal concentration, manganese ferrite nanoparticles (MFNPs) were used to demonstrate the versatility of tuning the loading amount of the nanoclusters. The resultant nanoclusters were found to have a well-controlled spherical shape. When Zn-doped AgInS2 quantum dots (AIZS QDs) were loaded together with the MFNP nanocrystals, bi-functional nanoclusters with fluorescent and magnetic behaviors were obtained. Such bi-functional nanoclusters were also successfully demonstrated for cellular bio-imaging. Moreover, the presence of another type of nanocrystals together with MFNPs was found to have a negligible effect on the overall properties of the nanoclusters as demonstrated by the MR relaxivity test. From the time-dependent colloidal stability test, it was found that the presence of the PEG chain grafted onto PMAO was able to reduce protein adsorption onto the nanocluster surface. An in vitro study on NIH/3T3 demonstrated the biocompatibility of the nanoclusters. Such biocompatible and colloidally stable nanoclusters with an approximate size of 80-120 nm were suitable for both MRI and cell labeling applications.

Intracellular SERS nanoprobes for distinction of different neuronal cell types

Distinction between closely related and morphologically similar cells is difficult by conventional methods especially without labeling. Using nuclear-targeted gold nanoparticles (AuNPs) as intracellular probes we demonstrate the ability to distinguish between progenitor and differentiated cell types in a human neuroblastoma cell line using surface-enhanced Raman spectroscopy (SERS). SERS spectra from the whole cell area as well as only the nucleus were analyzed using principal component analysis that allowed unambiguous distinction of the different cell types. SERS spectra from the nuclear region showed the developments during cellular differentiation by identifying an increase in DNA/RNA ratio and proteins transcribed. Our approach using nuclear-targeted AuNPs and SERS imaging provides label-free and noninvasive characterization that can play a vital role in identifying cell types in biomedical stem cell research.

Mesoporous silica coating on carbon nanotubes: layer-by-layer method

It is of great interest to develop a simple, general, and easy-handling procedure for mesoporous silica coating. A facile, single-step method to coat iron oxide nanoparticles has been reported by Hyeon's group. However, up to present, this method only successfully applied to those zero-dimensional nanostructures heavily capped by cetyltrimethyl ammonium bromide (CTAB); no others are reported. It is unknown how this simple method is feasible in coating those nanostructures not capped by CTAB. Herein, using carbon nanotubes (CNTs) as the model, through an analogous layer-by-layer assembly method, many more CTAB molecules were found to anchor to CNTs, on which uniform mesoporous silica shells can successfully be formed by Hyeon's coating method. We believe that this contribution will pave the way for advancing the single-step method to become a general protocol in the mesoporous silica coating field.

Monitoring controlled release of payload from gold nanocages using surface enhanced Raman scattering

Novel organic and inorganic nanostructures for localized and externally triggered delivery of therapeutic agents at a target site have received immense attention over the past decade owing to their enormous potential in treating complex diseases such as cancer. Gold nanocages, a novel class of hollow plasmonic nanostructures, have been recently demonstrated to serve as carriers for the delivery of payload with external trigger such as light or ultrasound. In this article, we demonstrate that surface enhanced Raman spectroscopy (SERS) can be employed to noninvasively monitor the release of payload from these hollow plasmonic nanostructures. The large enhancement of electromagnetic (EM) field at the interior surface of these nanostructures enables us to monitor the controlled release of Raman-active cargo from nanocages. Considering that SERS can be excited and collected in near-infrared (NIR) therapeutic window, this technique can serve as a powerful tool to monitor the drug release in vivo, providing additional control over externally triggered drug administration.

Nanoparticle-based systems for T(1)-weighted magnetic resonance imaging contrast agents

Because magnetic resonance imaging (MRI) contrast agents play a vital role in diagnosing diseases, demand for new MRI contrast agents, with an enhanced sensitivity and advanced functionalities, is very high. During the past decade, various inorganic nanoparticles have been used as MRI contrast agents due to their unique properties, such as large surface area, easy surface functionalization, excellent contrasting effect, and other size-dependent properties. This review provides an overview of recent progress in the development of nanoparticle-based T1-weighted MRI contrast agents. The chemical synthesis of the nanoparticle-based contrast agents and their potential applications were discussed and summarized. In addition, the recent development in nanoparticle-based multimodal contrast agents including T1-weighted MRI/computed X-ray tomography (CT) and T1-weighted MRI/optical were also described, since nanoparticles may curtail the shortcomings of single mode contrast agents in diagnostic and clinical settings by synergistically incorporating functionality.

Facile synthesis of magnetite/perfluorocarbon co-loaded organic/inorganic hybrid vesicles for dual-modality ultrasound/magnetic resonance imaging and imaging-guided high-intensity focused ultrasound ablation

Multifunctional organic/inorganic hybrid nanovesicles, fabricated by a facile self-assembly/sol-gel approach, display a unique morphology (figure) and satisfactory stability under physiological conditions. By co-encapsulation of superparamagnetic magnetite nanoparticles and a liquid perfluorocarbon, the nanovesicles can be used not only as a dual-modality ultrasound/magnetic resonance contrast agent for accurate cancer diagnosis and monitoring, but also as a therapeutic enhancement agent for effective high-intensity focused ultrasound (HIFU) ablation.

Delivery of cancer therapeutics using nanotechnology

Nanoparticles have been investigated as drug carriers, because they provide a great opportunity due to their advantageous features: (i) various formulations using organic/inorganic materials, (ii) easy modification of targeting molecules, drugs or other molecules on them, (iii) effective delivery to target sites, resulting in high therapeutic efficacy and (iv) controlling drug release by external/internal stimuli. Because of these features, therapeutic efficacy can be improved and unwanted side effects can be reduced. Theranostic nanoparticles have been developed by incorporating imaging agents in drug carriers as all-in-one system, which makes it possible to diagnose and treat cancer by monitoring drug delivery behavior simultaneously. Recently, stimuli-responsive, activatable nanomaterials are being applied that are capable of producing chemical or physical changes by external stimuli. By using these nanoparticles, multiple tasks can be carried out simultaneously, e.g., early and accurate diagnosis, efficient cataloguing of patient groups of personalized therapy and real-time monitoring of disease progress. In this paper, we describe various types of nanoparticles for drug delivery systems, as well as theranostic systems.

Optimizing radiolabeling amine-functionalized silica nanoparticles using SarAr-NCS for applications in imaging and radiotherapy

Silica nanoparticles functionalized with amine groups and in the size range of approximately 60-94 nm were produced by combining sol-gel processing and emulsion technology. Hexa-aza cage ligand SarAr-NCS was conjugated to the silica nanoparticles and subsequently radiolabeled with a solution of (57)Co(2+)-doped carrier Co(2+). The number of Co(2+) ions bound to the silica particles at pH 7 was used to determine the average number of available SarAr-NCS ligands conjugated to a silica particle. For organically modified silica particles of 94.0 and 59.5 nm diameter, the maximum number of metal binding sites was determined to be 11700 and 3270 sites per particle, respectively. For silica particles (63.5 nm peak diameter) produced using an water-in-oil emulsion, the calculated average was 4480 on the particle surface. The number of SarAr-NCS conjugated on the particles was easily controlled, potentially providing for a range of products for applications in the risk assessment of particles and theranostic imaging or radiotherapy when radiolabeled with a suitable radioisotope such as (64)Cu or (67)Cu.

Gold nanorods based platforms for light-mediated theranostics

Due to their tunable surface plasmon and photothermal effects, gold nanorods (AuNRs) have proved to be promising in a wide range of biomedical applications such as imaging, hyperthermia therapy and drug delivery. All these applications can be remotely controlled by near infrared (NIR) light which can penetrate deep into human tissues with minimal lateral invasion. AuNRs thus hold the potential to combine both imaging diagnosis and therapeutic treatment into one single system and function as a NIR light-mediated theranostic platform. Herein we review recent progress in diagnostic and therapeutic applications of AuNRs with a highlight on combined applications for theranostic purposes.

Magnetic field triggered drug release from polymersomes for cancer therapeutics

Local and temporal control of drug release has for long been a main focus in the development of novel drug carriers. Polymersomes, which can load both hydrophilic and hydrophobic species and, at the same time, be tailored to respond to a desired stimulus, have drawn much attention over the last decade. Here we describe polymersomes able to encapsulate up to 6% (w/w) of doxorubicin (DOX) together with 30% (w/w) of superparamagnetic iron oxide nanoparticles (USPIO; γ-Fe2O3). Upon internalization in HeLa cells and when a high frequency AC magnetic field (14mT at 750kHz) was applied, the developed delivery system elicited an 18% increase in cell toxicity, associated with augmented DOX release kinetics. In order to ensure that the observed cytotoxicity arose from the increased doxorubicin release and not from a pure magnetic hyperthermia effect, polymersomes loaded with magnetic nanoparticles alone were also tested. In this case, no increased toxicity was observed. We hypothesize that the magnetic field is inducing a very local hyperthermia effect at the level of the polymersome membrane, increasing drug release. This approach opens new perspectives in the development of smart delivery systems able to release drug upon demand and therefore, improving treatment control.

UV-induced functionalization of poly(divinylbenzene) nanoparticlesvia efficient [2 + 2]-photocycloadditions

A facile postmodification strategy for the surface functionalization of nanoparticles is presented based on [2 + 2] photoconjugation with particles made from miniemulsion polymerization of divinylbenzene.