Copper-Mediated Living Radical Polymerization (Atom Transfer Radical Polymerization and Copper(0) Mediated Polymerization): From Fundamentals to Bioapplications

Supported Cu0 nanoparticles catalyst for controlled radical polymerization reaction and block-copolymer synthesis

The synthesis of Cu⁰ nanoparticles on different supports and their activity in controlled living radical polymerization processes is presented. The type of support influences the final size of the copper nanoparticles as well as their adhesion to the support. These aspects have a direct influence on the characteristics of the polymers obtained. The best results were obtained for SiO₂ particles, which afforded a good molecular weight distribution (Mw/Mn = 1.25). The activity, recovery and recycling of the catalyst was explored for ultrafast polymerization reaction of butyl acrylate. Further, the terminal bromine reactivity was used for the synthesis of a block poly(n butyl acrylate-block-styrene). The influence of ligand type on the control of the reaction was studied. Also, a straightforward polymerization procedure without any ligand afforded a polydispersity value of 1.38.

Organocatalyzed Atom Transfer Radical Polymerization: Perspectives on Catalyst Design and Performance

The recent development of organocatalyzed atom transfer radical polymerization (O-ATRP) represents a significant advancement in the field of controlled radical polymerizations. A number of classes of photoredox catalysts have been employed thus far in O-ATRP. Analysis of the proposed mechanism gives insight into the relevant photophysical and chemical properties that determine catalyst performance. Discussion of each of the classes of O-ATRP catalysts highlights their previous uses, their roles in the development of O-ATRP, and the distinctive properties that govern their polymerization behavior, leading to a set of design principles for O-ATRP catalysts. Remaining challenges for O-ATRP are presented, as well as prospects for further improvement in the application scope of O-ATRP.

A General Copper Catalyst for Photoredox Transformations of Organic Halides

A broadly applicable copper catalyst for photoredox transformations of organic halides is reported. Upon visible light irradiation in the presence of catalytic amounts of [(DPEphos)(bcp)Cu]PF₆ and an amine, a range of unactivated aryl and alkyl halides were shown to be smoothly activated through a rare Cu(I)/Cu(I)*/Cu(0) catalytic cycle. This complex efficiently catalyzes a series of radical processes, including reductions, cyclizations, and direct arylation of arenes.

Achieving Ultralow Fouling under Ambient Conditions via Surface-Initiated ARGET ATRP of Carboxybetaine

We achieved ultralow fouling on target surfaces by controlled polymerization of carboxybetaine under ambient conditions. The polymerization process for grafting polymer films onto the surfaces was carried out in air and did not require any deoxygenation step or specialized equipment. This method allows one to conveniently introduce a nonfouling polymer network onto large substrates.

Recent Developments in the Synthesis of Biomacromolecules and their Conjugates by Single Electron Transfer-Living Radical Polymerization

Single electron transfer-living radical polymerization (SET-LRP) represents a robust and versatile tool for the synthesis of vinyl polymers with well-defined topology and chain end functionality. The crucial step in SET-LRP is the disproportionation of the Cu(I)X generated by activation with Cu(0) wire, powder, or nascent Cu(0) generated in situ into nascent, extremely reactive Cu(0) atoms and nanoparticles and Cu(II)X₂. Nascent Cu(0) activates the initiator and dormant chains via a homogeneous or heterogeneous outer-sphere single-electron transfer mechanism (SET-LRP). SET-LRP provides an ultrafast polymerization of a plethora of monomers (e.g., (meth)-acrylates, (meth)-acrylamides, styrene, and vinyl chloride) including hydrophobic and water insoluble to hydrophilic and water soluble. Some advantageous features of SET-LRP are (i) the use of Cu(0) wire or powder as readily available catalysts under mild reaction conditions, (ii) their excellent control over molecular weight evolution and distribution as well as polymer chain ends, (iii) their high functional group tolerance allowing the polymerization of commercial-grade monomers, and (iv) the limited purification required for the resulting polymers. In this Perspective, we highlight the recent advancements of SET-LRP in the synthesis of biomacromolecules and of their conjugates.

Rational Design of Single-Chain Polymeric Nanoparticles That Kill Planktonic and Biofilm Bacteria

Infections caused by multidrug-resistant bacteria are on the rise and, therefore, new antimicrobial agents are required to prevent the onset of a postantibiotic era. In this study, we develop new antimicrobial compounds in the form of single-chain polymeric nanoparticles (SCPNs) that exhibit excellent antimicrobial activity against Gram-negative bacteria (e.g., Pseudomonas aeruginosa) at micromolar concentrations (e.g., 1.4 μM) and remarkably kill ≥99.99% of both planktonic cells and biofilm within an hour. Linear random copolymers, which comprise oligoethylene glycol (OEG), hydrophobic, and amine groups, undergo self-folding in aqueous systems due to intramolecular hydrophobic interactions to yield these SCPNs. By systematically varying the hydrophobicity of the polymer, we can tune the extent of cell membrane wall disruption, which in turn governs the antimicrobial activity and rate of resistance acquisition in bacteria. We also show that the incorporation of OEG groups into the polymer design is essential in preventing complexation with proteins in biological medium, thereby maintaining the antimicrobial efficacy of the compound even in in vivo mimicking conditions. In comparison to the last-resort antibiotic colistin, our lead agents have a higher therapeutic index (by ca. 2-3 times) and hence better biocompatibility. We believe that the SCPNs developed here have potential for clinical applications and the information pertaining to their structure-activity relationship will be valuable toward the general design of synthetic antimicrobial (macro)molecules.

Automated Synthesis of Well-Defined Polymers and Biohybrids by Atom Transfer Radical Polymerization Using a DNA Synthesizer

A DNA synthesizer was successfully employed for preparation of well-defined polymers by atom transfer radical polymerization (ATRP), in a technique termed AutoATRP. This method provides well-defined homopolymers, diblock copolymers, and biohybrids under automated photomediated ATRP conditions. PhotoATRP was selected over other ATRP methods because of mild reaction conditions, ambient temperature, tolerance to oxygen, and no need to introduce reducing agents or radical initiators. Both acrylate and methacrylate monomers were successfully polymerized with excellent control in the DNA synthesizer. Diblock copolymers were synthesized with different targeted degrees of polymerization and with high retention of chain-end functionality. Both hydrophobic and hydrophilic monomers were grafted from DNA. The DNA-polymer hybrids were characterized by SEC and DLS. The AutoATRP method provides an efficient route to prepare a range of different polymeric materials, especially polymer-biohybrids.

Versatile Functionalization of Polysaccharides via Polymer Grafts: From Design to Biomedical Applications

Because of their biocompatibility, biodegradability, and unique bioactive properties, polysaccharides have been recognized and directly applied as excellent candidates for various biomedical applications. In order to introduce more functionalities onto polysaccharides, various modification methods were applied to improve the physical-chemical and biochemical properties. Grafting polysaccharides with functional polymers with limited reaction sites maximizes the structural integrity. To the best of our knowledge, great efforts have been made by scientists across the world, including our research group, to explore different strategies for the synthesis and design of controllable polymer-grafted polysaccharides. By the application of some reasonable strategies, a series of polymer-grafted polysaccharides with satisfactory biocharacteristics were obtained. The first strategy involves facile modification of polysaccharides with living radical polymerization (LRP). Functionalized polysaccharides with diverse grafts can be flexibly and effectively achieved. The introduced grafts include cationic components for nuclei acid delivery, PEGylated and zwitterionic moieties for shielding effects, and functional species for bioimaging applications as well as bioresponsive drug release applications. The second synthetic model refers to biodegradable polymer-grafted polysaccharides prepared by ring-opening polymerization (ROP). Inspired by pathways to introduce initiation sites onto polysaccharides, the use of amine-functionalized polysaccharides was explored in-depth to trigger ROP of amino acids. A series of poly(amino acid)-grafted polysaccharides with advanced structures (including linear, star-shaped, and comb-shaped copolymers) were developed to study and optimize the structural effects. In addition, biodegradable polyester-grafted polysaccharides were prepared and utilized for drug delivery. Another emerging strategy was to design polysaccharide-based assemblies with supramolecular structures. A variety of assembly techniques using non-covalent interactions were established to construct different types of polysaccharide-based assemblies with various bioapplications. On the basis of these strategies, polymer-grafted polysaccharides with controllable functions were reported to be well-suited for different kinds of biomedical applications. The exciting results were obtained from both in vitro and in vivo models. Viewing the rapid growth of this field, the present Account will update the concepts, trends, perspectives, and applications of functionalized polysaccharides, guiding and inspiring researchers to explore new polysaccharide-based systems for wider applications.

Biocompatible Polymeric Analogues of DMSO Prepared by Atom Transfer Radical Polymerization

The synthesis of a sulfoxide-based water-soluble polymer, poly(2-(methylsulfinyl)ethyl acrylate) (polyMSEA), a polymeric analogue of DMSO, by atom transfer radical polymerization (ATRP) is reported. Well-defined linear polymers were synthesized using relatively low amounts of copper catalyst (1000 or 100 ppm). Two types of star polymers were synthesized by either an "arm-first" approach or a "core-first" approach using a biodegradable β-cyclodextrin core. The glass transition temperatures of both the linear polymer (16 °C) and star polymer (32 °C) were determined by differential scanning calorimetry (DSC). The lower critical solution temperature (LCST) of poly(MSEA) was estimated to be ca. 140 °C by extrapolating the LCST of a series of copolymers with NIPAM. Cytotoxicity tests revealed that both the linear and star polymers have low toxicity, even at concentrations up to 3 mg/mL.

Aqueous SARA ATRP using Inorganic Sulfites

Aqueous supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) using inorganic sulfites was successfully carried out for the first time. Under optimized conditions, a well-controlled poly[oligo(ethylene oxide) methyl ether acrylate] (POEOA) was obtained with <30 ppm of soluble copper catalyst using tris(2-pyridylmethyl)amine (TPMA) ligand in the presence of an excess of halide salts (e.g. NaCl). Inorganic sulfites (e.g. Na2S2O4) were continuously fed into the reaction mixture. The mechanistic studies proved that these salts can activate alkyl halides directly and regenerate the activator complex. The effects of the feeding rate of the SARA agent (inorganic sulfites), ligand and its concentration, halide salt and its concentration, sulfite used, and copper concentration, were systematically studied to afford fast polymerizations rates while maintaining the control over polymerization. The kinetic data showed linear first-order kinetics, linear evolution of molecular weights with conversion, and polymers with narrow molecular weight distributions (Đ ~1.2) during polymerization even at relatively high monomer conversions (~80%). "One-pot" chain extension and "one-pot" block copolymerization experiments proved the high chain-end functionality. The polymerization could be directly regulated by starting or stopping the continuous feeding of the SARA agent. Under biologically relevant conditions, the aqueous SARA ATRP using inorganic sulfites was used to synthesize a well-defined protein-polymer hybrid by grafting of P(OEOA480) from BSA-O-[iBBr]30.

Intramolecular Charge Transfer and Ion Pairing in N,N-Diaryl Dihydrophenazine Photoredox Catalysts for Efficient Organocatalyzed Atom Transfer Radical Polymerization

Photoexcited intramolecular charge transfer (CT) states in N,N-diaryl dihydrophenazine photoredox catalysts are accessed through catalyst design and investigated through combined experimental studies and density functional theory (DFT) calculations. These CT states are reminiscent of the metal to ligand charge transfer (MLCT) states of ruthenium and iridium polypyridyl complexes. For cases where the polar CT state is the lowest energy excited state, we observe its population through significant solvatochromic shifts in emission wavelength across the visible spectrum by varying solvent polarity. We propose the importance of accessing CT states for photoredox catalysis of atom transfer radical polymerization lies in their ability to minimize fluorescence while enhancing electron transfer rates between the photoexcited photoredox catalyst and the substrate. Additionally, solvent polarity influences the deactivation pathway, greatly affecting the strength of ion pairing between the oxidized photocatalyst and the bromide anion and thus the ability to realize a controlled radical polymerization. Greater understanding of these photoredox catalysts with respect to CT and ion pairing enables their application toward the polymerization of methyl methacrylate for the synthesis of polymers with precisely tunable molecular weights and dispersities typically lower than 1.10.

An amphiphilic non-viral gene vector prepared by a combination of enzymatic atom transfer radical polymerization and enzymatic ring-opening polymerization

An amphiphilic non-viral gene vector (PCL-b-PGEA) was prepared by a combination of enzymatic ring-opening polymerization and enzymatic atom transfer radical polymerization for the first time and the kinetic features and gene delivery properties were investigated.

Copper photoredox catalysts for polymerization upon near UV or visible light: structure/reactivity/efficiency relationships and use in LED projector 3D printing resins

Copper complexes are synthesized and evaluated as new photoredox catalysts/photoinitiators.

Opportunities for dual RDRP agents in synthesizing novel polymeric materials

Dual RDRP agents provide access to new polymeric materials by combining ATRP, NMP, and RAFT polymerization without end group transformations.

Synthesis of diblock copolymer nano-assemblies by PISA under dispersion polymerization: comparison between ATRP and RAFT

PHPMA-b-PBzMA diblock copolymer nano-assemblies were synthesized by ATRP dispersion polymerization and were compared with those obtained by RAFT dispersion polymerization.

Dispersion and soap-free emulsion polymerization of tert-butyl acrylate with the living character and controlled particle size mediated by cobalt porphyrin

Living radical polymerization (LRP) of tert-butyl acrylate (tBA) was carried out via the dispersion and soap-free emulsion polymerization mediated by cobalt porphyrin [cobalt tetramethoxyphenylporphyrin, (TMOP)Co(ii)].

RAFT polymerization to form stimuli-responsive polymers

Stimuli-responsive polymers respond to a variety of external stimuli, which include optical, electrical, thermal, mechanical, redox, pH, chemical, environmental and biological signals. This paper is concerned with the process of forming such polymers by RAFT polymerization.

A facile, simple, and inexpensive ionic liquid, 1-alkyl-3-methylimidazole chloride, as ligand for the iron(iii)-mediated reverse atom transfer radical polymerization of methyl methacrylate

The facile, simple, and inexpensive ILs, 1-alkyl-3-methylimidazole chloride ([Rmim][Cl]), are explored for the first time as ligands for the reverse ATRP of methacrylates.

Acetone–water biphasic mixtures as solvents for ultrafast SET-LRP of hydrophobic acrylates

Transformation of SET-LRP catalyzed with Cu(0) wire from single phase (acetone/water = 9/1, v/v) into biphase (acetone/water = 8/2, v/v).

Advantages and limitations of diisocyanates in intramolecular collapse

A comprehensive examination of the synthesis of single chain polymer nanoparticles (SCPNs) from a copolymer of methyl acrylate (MA) and 2-hydroxyethyl acrylate (HEA) via the intra-chain urethane formation by using hexamethylene diisocyanate (HDI) as a cross-linker is described.

Polymer synthesis by mimicking nature's strategy: the combination of ultra-fast RAFT and the Biginelli reaction

A two-stage method has been developed by mimicking nature's protein synthesis strategy to prepare plenty of polymers using limited monomers.