Rational design of cytophilic and cytophobic polyelectrolyte multilayer thin films

Preparation of ultrathin self-standing polyelectrolyte multilayer membranes at physiological conditions using pH-responsive film segments as sacrificial layers

A new system to obtain ultrathin self-standing polyelectrolyte multilayer membranes at physiological conditions is introduced. On the surface of a substrate, a hybrid film structure composed of two compartments, (1) a pH-responsive film segment formed via hydrogen bonds and (2) a polyelectrolyte multilayer film on top of 1, was assembled. The pH-responsive polymer multilayer segments disintegrate at a neutral pH and release self-standing polyelectrolyte multilayer films. The obtained self-supporting polyelectrolyte multilayer membranes had thicknesses of 55 to several hundred nanometers and areas of a few square centimeters, approximately. The preparation method introduced here avoids harsh release conditions and thus broadens the choice of materials that can be incorporated into the self-standing film.

Fabrication of interdigitated micropatterns of self-assembled polymer nanofilms containing cell-adhesive materials

Micropatterns of different biomaterials with micro- and nanoscale features and defined spatial arrangement on a single substrate are useful tools for studying cellular-level interactions, and recent reports have highlighted the strong influence of scaffold compliance in determining cell behavior. In this paper, a simple yet versatile and precise patterning technique for the fabrication of interdigitated micropatterns of nanocomposite multilayer coatings on a single substrate is demonstrated through a combination of lithography and layer-by-layer (LbL) assembly processes, termed polymer surface micromachining (PSM). The first nanofilm pattern is constructed using lithography, followed by LbL multilayer assembly and lift-off, and the process is repeated with optical alignment to obtain interdigitated patterns on the same substrate. Thus, the method is analogous to surface micromachining, except that the deposition materials are polymers and biological materials that are used to produce multilayer nanocomposite structures. A key feature of the multilayers is the capability to tune properties such as stiffness by appropriate selection of materials, deposition conditions, and postdeposition treatments. Two- and four-component systems on glass coverslips are presented to demonstrate the versatility of the approach to construct precisely defined, homogeneous nanofilm patterns. In addition, an example of a complex system used as a testbed for in vitro cell adhesion and growth is provided: micropatterns of poly(sodium 4-styrenesulfonate)/poly-L-lysine hydrobromide (PSS/PLL) and secreted phospholipase A(2)/poly(ethyleneimine) (sPLA(2)/PEI) multilayers. The interdigitated square nanofilm array patterns were obtained on a single coverslip with poly(diallyldimethylammonium chloride) (PDDA) as a cell-repellent background. Cell culture experiments show that cortical neurons respond and bind specifically to the sPLA(2) micropatterns in competition with PLL micropatterns. The fabrication and the initial biological results on the nanofilm micropatterns support the usefulness of this technique for use in studies aimed at elucidating important biological structure-function relationships, but the applicability of the fabrication method is much broader and may impact electronics, photonics, and chemical microsystems.

Controlled drug release from porous polyelectrolyte multilayers

Microporous and nanoporous polyelectrolyte multilayer films have been explored as ultrathin coatings for controlled drug release. Ketoprofen and cytochalasin D were successfully loaded into nanoporous films and showed zero-order release kinetics over a period of many days. In addition to homogeneous porous multilayers, heterostructures comprising porous regions stacked alternately with nonporous regions were assembled. The heterostructures behaved as dielectric mirrors, which made it possible to optically monitor the loading process. The effects of varying the number of layers in porous and nonporous regions as well as the pore size on the drug release properties were studied. Nonporous regions in the film had no effect on the release rate or duration of release. The amount of drug released could be tuned by varying the number of layers in the porous regions of films, and the release rate depended on the pore size in the films. Microporous multilayers exhibited a Fickian diffusion of drug that was approximately twice as fast as the corresponding nanoporous films. Finally, cell culture experiments with WT NR6 fibroblasts confirmed that cytochalasin D retained its ability to inhibit mitosis after release from the multilayers.

Polyelectrolyte multilayer films as substrates for photoreceptor cells

Reconstruction of extracellular matrix substrates for delivery of functional photoreceptors is crucial in pathologies such as retinal degeneration and age-related macular degeneration. In this study, we assembled polyelectrolyte films using the layer-by-layer deposition method. The buildup of three different films composed of poly(L-lysine)/chondroitin sulfate (PLL/CSA), poly(L-lysine)/poly(styrenesulfonate) (PLL/PSS), or poly(L-lysine)/hyaluronic acid (PLL/HA) was followed by means of quartz crystal microbalance measurements, optical waveguide light mode spectroscopy, confocal microscopy, and atomic force microscopy. The exponential growth regime and the diffusion of PLL chains from the bulk through the PLL/CSA, PLL/PSS, and PLL/HA films was examined. Evaluation of photoreceptor cell viability was optimal on one layer of PLL (PLL(1)), followed by 10 bilayers of PLL/HA [(PLL/HA)(10)] and 10 bilayers of PLL/CSA [(PLL/CSA)(10)]. The number of bilayers and the type of terminating layer also had a significant influence on the number of photoreceptor cells attached. Functionalized polyelectrolyte multilayer films were obtained by adsorbing basic fibroblastic factor (bFGF) or the insoluble fraction of interphotoreceptor matrix (IPM) on or within polyelectrolyte multilayers. bFGF and IPM adsorption on top of the (PLL/CSA)(10)/PLL polyelectrolyte films increased the number of photoreceptor cells attached and maintained the differentiation of rod and cone cells.

Biologically active lipid A antagonist embedded in a multilayered polyelectrolyte architecture

Recently [Jessel N, Schwinte P, Donohue R, Lavalle P, Boulmedais F, Darcy R, et al. Pyridylamino-beta-cyclodextrin as a molecular chaperone for lipopolysaccharide embedded in a multilayered polyelectrolyte architecture. Adv Funct Mater 2004;14:963-9], we demonstrated the biological activity of a lipopolysaccharide from Escherichia coli incorporated into layer-by-layer films made of poly (l-lysine) and poly (l-glutamic acid) and containing a polycationic beta-cyclodextrin (CD) with chaperone properties. Here we develop innovative architectures containing a complex made of a charged beta-cyclodextrin and a lipid A antagonist (LAA) as potential systems for local endotoxin antagonistic activity. We examine the biological activity of these architectures. The CD-LAA complex adsorbed on top, or embedded into the polyelectrolyte films keeps its LPS antagonistic activity on both murine and human macrophages for at least 24h.

Layer-by-layer self-assembled polyelectrolyte multilayers with embedded liposomes: immobilized submicronic reactors for mineralization

The development of chemical reactions in nanospaces is of paramount importance for the development of active nanodevices, particularly in nanofluidics. It has been shown in a previous paper that phospholipid vesicles can be incorporated without spontaneous bilayer rupture into poly-L-glutamic acid/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films. The aim of the present study was to use such a system as an "embedded submicronic reactor" able to trigger precipitation of calcium phosphates within closed spaces through an enzymatic reaction, the enzyme also being encapsulated in the vesicle interior. To this aim, large unilamellar vesicles (LUVs) were produced containing calcium ions as active ions in the mineralization process, spermine as an activator of crystal growth, and alkaline phosphatase as a catalyst to convert phosphate esters into phosphates. After stabilization by adding a layer of poly-(D-lysine), these vesicles were embedded in a (PGA-PAH)n film. A paranitrophenyl phosphate containing solution was then put in contact with this film. It is shown by means of infrared spectroscopy in the attenuated total reflection mode that, consecutively to this contact, calcium phosphates are growing inside the embedded vesicles. By using scanning near-field fluorescence microscopy, it is demonstrated that the alkaline phosphatase enzymes are most probably located inside the vesicles after their embedding. In addition, atomic force microscopy was used to show, after chemical removal of the organic top layer of the film, that the inorganic platelets produced after the precipitation reaction are localized in volumes of similar size and shape as that of the vesicles into which the phosphate ester hydrolysis and subsequent precipitation reaction did occur.

Polypeptide multilayer films

Research on polypeptide multilayer films, coatings, and microcapsules is located at the intersection of several disciplines: synthetic polymer chemistry and physics, biomaterials science, and nanoscale engineering. The past few years have witnessed considerable growth in each of these areas. Unexplored territory has been found at the borders, and new possibilities for technology development are taking form from technological advances in polypeptide production, sequencing of the human genome, and the nature of peptides themselves. Most envisioned applications of polypeptide multilayers have a biomedical bent. Prospects seem no less positive, however, in fields ranging from food technology to environmental science. This review of the present state of polypeptide multilayer film research covers key points of polypeptides as materials, means of polymer production and film preparation, film characterization methods, focal points of current research in basic science, and the outlook for a few specific applications. In addition, it discusses how the study of polypeptide multilayer films could help to clarify the physical basis of assembly and stability of polyelectrolyte multilayers, and mention is made of similarities to protein folding studies.

Fibronectin and cell attachment to cell and protein resistant polyelectrolyte surfaces

Culture of A7r5 smooth muscle cells on a polyelectrolyte multilayer film (PEMU) can influence various cell properties, including adhesion, motility, and cytoskeletal organization, that are modulated by the extracellular matrix (ECM) in vivo. ECM contribution to cell behavior on PEMUs was investigated by determining the amount of fibronectin (FN) bound to charged and hydrophobic PEMUs by optical waveguide lightmode spectroscopy and immunofluorescence microscopy. FN bound best to poly(allylamine hydrochloride) (PAH)-terminated and Nafion-terminated PEMUs. FN bound poorly to PEMUs terminated with a copolymer of poly(acrylic acid) (PAA) and 3-[2-(acrylamido)-ethyl dimethylammonio] propane sulfonate (PAA-co-AEDAPS). Cells adhered and spread well on the Nafion-terminated PEMU surfaces. In contrast, cells spread less and migrated more on both FN-coated and uncoated PAH-terminated PEMU surfaces. Both cells and FN interacted much better with Nafion than with PAA-co-PAEDAPS in a micropatterned PEMU. These results indicate that A7r5 cell adhesion, spreading, and motility on PEMUs can be independent of FN binding to the surfaces.

Surface engineering approaches to micropattern surfaces for cell-based assays

The ability to produce patterns of single or multiple cells through precise surface engineering of cell culture substrates has promoted the development of cellular bioassays that provide entirely new insights into the factors that control cell adhesion to material surfaces, cell proliferation, differentiation and molecular signaling pathways. The ability to control shape and spreading of attached cells and cell-cell contacts through the form and dimension of the cell-adhesive patches with high precision is important. Commitment of stem cells to different specific lineages depends strongly on cell shape, implying that controlled microenvironments through engineered surfaces may not only be a valuable approach towards fundamental cell-biological studies, but also of great importance for the design of cell culture substrates for tissue engineering. Furthermore, cell patterning is an important tool for organizing cells on transducers for cell-based sensing and cell-based drug discovery concepts. From a material engineering standpoint, patterning approaches have greatly profited by combining microfabrication technologies, such as photolithography, with biochemical functionalization to present to the cells biological cues in spatially controlled regions where the background is rendered non-adhesive ("non-fouling") by suitable chemical modification. The focus of this review is on the surface engineering aspects of biologically motivated micropatterning of two-dimensional (flat) surfaces with the aim to provide an introductory overview and critical assessment of the many techniques described in the literature. In particular, the importance of non-fouling surface chemistries, the combination of hard and soft lithography with molecular assembly techniques as well as a number of less well known, but useful patterning approaches, including direct cell writing, are discussed.

Protection of mammalian cell used in biosensors by coating with a polyelectrolyte shell

In order to detect xenoestrogens which induce perturbations of mammalian cells, design of biosensor using a mammalian cell line enable to detect these compounds is necessary. MELN cell line is suitable to detect estrogen activity, since they are stably transfect with an estrogen regulated luciferase gene. To realize this biosensor, it appeared necessary to add a protection to the mamalian cell, which is devoided, of the wall protecting yeasts or plant cells. With this aim in view, MELN cells have been isolated with a polyelectrolyte shell using the layer-by-layer technique. Among several polyelectrolyte-couples, the best cell survival (>80%) was obtained by alternating the polycation poly-diallyldimethyl ammonium chloride layer and the negatively charged poly-styrene sulfonate. We observed that the composition of the buffer used for layer-deposition was crucial to preserving cell viability, e.g. potassium ions were preferred to sodium ions during the coating. Furthermore, viability was increased when cells were allowed to recover for 2 h between each bilayer deposition. The use of engineered mammalian cells that synthesize luciferase as a response to exposure to estradiol, demonstrated that coating not only permits cell survival, but also allows essential metabolic functions, such as RNA and protein synthesis to take place. Capsule formation allows free diffusion of small molecules, while it prevents internalization in the cells of proteins larger than 60 kDa.

Polyelectrolyte multilayers with a tunable Young's modulus: influence of film stiffness on cell adhesion

Mechanical properties of model and natural gels have recently been demonstrated to play an important role in various cellular processes such as adhesion, proliferation, and differentiation, besides events triggered by chemical ligands. Understanding the biomaterial/cell interface is particularly important in many tissue engineering applications and in implant surgery. One of the final goals would be to control cellular processes precisely at the biomaterial surface and to guide tissue regeneration. In this work, we investigate the substrate mechanical effect on cell adhesion for thin polyelectrolyte multilayer (PEM) films, which can be easily deposited on any type of material. The films were cross linked by means of a water-soluble carbodiimide (EDC), and the film elastic modulus was determined using the AFM nanoindentation technique with a colloidal probe. The Young's modulus could be varied over 2 orders of magnitude (from 3 to 400 kPa) for wet poly(L-lysine)/hyaluronan (PLL/HA) films by changing the EDC concentration. The chemical changes upon cross linking were characterized by means of Fourier transform infrared spectroscopy (FTIR). We demonstrated that the adhesion and spreading of human chondrosarcoma cells directly depend on the Young's modulus. These data indicate that, besides the chemical properties of the polyelectrolytes, the substrate mechanics of PEM films is an important parameter influencing cell adhesion and that PEM offer a new way to prepare thin films of tunable mechanical properties with large potential biomedical applications including drug release.

Structure/property relationships in erodible multilayered films: influence of polycation structure on erosion profiles and the release of anionic polyelectrolytes

We have investigated the influence of polymer structure on the erosion profiles of multilayered polyelectrolyte assemblies fabricated from sodium poly(styrene sulfonate) (SPS) and three different hydrolytically degradable polyamines. We synthesized three structurally related poly(beta-amino ester)s (polymers 1-3) having systematic variations in both charge density and hydrophobicity. These changes in structure did not influence film thickness significantly, but polymer structure was found to play an important role in defining the rates at which multilayered assemblies fabricated from these materials eroded in physiologically relevant media. Films 60 nm thick fabricated from polymer 1 and SPS eroded completely in 50 h when incubated in PBS buffer at 37 degrees C, as determined by ellipsometry. Analogous films fabricated from polymers 2 and 3 eroded and released SPS into solution over significantly longer time periods ranging from approximately 150 h (ca. 6 days) to 370 h (ca. 15 days), respectively. These differences are consistent with a systematic increase in the hydrophobicity of polymers 1-3 as well as the relative rates at which these polymers degrade hydrolytically. This work demonstrates that it is possible to tailor the rates at which thin, multilayered polyelectrolyte assemblies release incorporated anionic polyelectrolytes over a large range of time periods simply by changing the structure of the degradable polyamine used to fabricate a film. The principles reported here may therefore contribute to the design of multilayered assemblies that permit a broad range of spatial and temporal control over the release of therapeutic agents from coated surfaces.

Tunable DNA Release from Cross-Linked Ultrathin DNA/PLL Multilayered Films

A novel ultrathin enzymatically degradable multilayered film using DNA as building blocks was fabricated by the layer-by-layer (LbL) technique. The UV-vis spectrometry and AFM experiments showed that the buildup of DNA and poly-L-lysine (PLL) was a kind of "exponentially growing films". The dye adsorption experiment suggested that the DNA molecules in the multilayered films were effectively protected by PLL. The films were further cross-linked by glutaraldehyde (GA). The cross-linking density of the films was modulated through the simple controlling of the time of the GA incubation process. An in vitro enzymatic degradation was carried out to investigate the DNA release profiles. The UV-vis spectrometry and fluorescence measurements indicated that the DNA release profiles were accordingly changed with the cross-linking density of the films. The nanoscale, easily processed enzymatically biodegradable PLL/DNA film with the ability to precisely control DNA release profiles may serve as a novel DNA delivery system, which may have great potential for gene therapy applications in implantable materials and biomedical devices.

Construction and deconstruction of PLL/DNA multilayered films for DNA delivery: Effect of ionic strength

Through the layer-by-layer (LbL) self-assembly technique, DNA was incorporated into the multilayered films with poly-l-lysine (PLL). The effect of ionic strength on the construction and deconstruction of the PLL/DNA films was investigated. It was found that the salt concentration of the deposition solution had a significant effect on the construction of the films, which might attribute to the effect of salt ions on the conformation of polyelectrolytes and interaction between PLL and DNA molecules. A salt-induced deconstruction of the PLL/DNA films was observed. The extent of the deconstruction increased with the salt concentration in the incubation solution. The mechanism of the deconstruction was discussed. Taking the advantages of the LbL technique, the erasable PLL/DNA films could deposit onto a variety of surfaces, such as vascular stent, intervention catheter and tissue engineering scaffold, to serve as a novel DNA delivery system.

Tuning compliance of nanoscale polyelectrolyte multilayers to modulate cell adhesion

It is well known that mechanical stimuli induce cellular responses ranging from morphological reorganization to mineral secretion, and that mechanical stimulation through modulation of the mechanical properties of cell substrata affects cell function in vitro and in vivo. However, there are few approaches by which the mechanical compliance of the substrata to which cells adhere and grow can be determined quantitatively and varied independent of substrata chemical composition. General methods by which mechanical state can be quantified and modulated at the cell population level are critical to understanding and engineering materials that promote and maintain cell phenotype for applications such as vascular tissue constructs. Here, we apply contact mechanics of nanoindentation to measure the mechanical compliance of weak polyelectrolyte multilayers (PEMs) of nanoscale thickness, and explore the effects of this tunable compliance for cell substrata applications. We show that the nominal elastic moduli E(s) of these substrata depend directly on the pH at which the PEMs are assembled, and can be varied over several orders of magnitude for given polycation/polyanion pairs. Further, we demonstrate that the attachment and proliferation of human microvascular endothelial cells (MVECs) can be regulated through independent changes in the compliance and terminal polyion layer of these PEM substrata. These data indicate that substrate mechanical compliance is a strong determinant of cell fate, and that PEMs of nanoscale thickness provide a valuable tool to vary the external mechanical environment of cells independently of chemical stimuli.

Surface viscoelastic properties of floating polyelectrolyte multilayers films: A capillary wave study

A capillary wave technique was used to study the viscoelastic properties of floating polyelectrolyte multilayers of (PSS/PAH)(n) at the air-water interface. Oppositely charged polyelectrolyte layers were adsorbed onto two different Langmuir monolayers, either the lipid dimethyldioctadecylammonium bromide (DODAB) or the block copolymer poly(styrene-b-sodium acrylate) (PS-b-PAA). The results allow to propose a schematic representation of the multilayers in three zones: Zone I as a precursor, representing the adhesion between the Langmuir monolayer and the bulk polyelectrolyte multilayer. Zone II forms a bulk or core zone of the multilayer. Zone III as an outer zone in direct contact with the aqueous phase. The results show an increase of the elasticity after the formation of four polyelectrolyte layers accompanied by an apparent negative viscosity. This behaviour was interpreted as a translation of elasticity dominance from zone I to zone II. The Young modulus of seven layers was in the same order of magnitude as observed for planar polyelectrolyte multilayer films.

Use of Porous Membranes Modified with Polyelectrolyte Multilayers as Substrates for Protein Arrays with Low Nonspecific Adsorption

Coating of substrates with polyelectrolyte multilayers terminated with poly(acrylic acid) (PAA) followed by activation of the free -COOH groups of PAA provides a surface that readily reacts with amine groups to allow covalent immobilization of antibodies. The use of this procedure to prepare arrays of antibodies in porous alumina supports facilitates construction of a flow-through system for analysis of fluorescently labeled antigens. Detection limits in the analysis of Cy5-labeled IgG are 0.02 ng/mL because of the high surface area of the alumina membrane, and the minimal diameter of the substrate pores results in binding limited by kinetics, not mass transport. Moreover, PAA-terminated films resist nonspecific protein adsorption, so blocking of antibody arrays with bovine serum albumin is not necessary. These microarrays are capable of effective analysis in 10% fetal bovine serum.

Surface modification of poly(ethylene terephthalate) via hydrolysis and layer-by-layer assembly of chitosan and chondroitin sulfate to construct cytocompatible layer for human endothelial cells

Surface modification of poly(ethylene terephthalate) (PET) film was performed by surface hydrolysis and layer-by-layer (LBL) assembly followed a mechanism of electrostatic adsorption of oppositely charged polymers, exemplified with chitosan and chondroitin sulfate (CS). Hydrolysis of PET in concentrated alkaline solution produced a carboxyl-enriched surface. The changes of weight loss and surface chemistry, morphology and wettability were monitored and verified by UV-vis spectroscopy, atomic force microscopy (AFM) and water contact angle. Assembly of positively charged chitosan and negatively charged CS was then conducted in a LBL manner to create multilayers on the hydrolyzed PET film. The process of layer growth and oscillation of surface wettability were monitored by UV-vis spectroscopy and water contact angle measurement, respectively. In vitro cell culture revealed that the adherence of endothelial cells was significantly enhanced on the biomacromolecules-modified PET film with preserved endothelial cell function, in particular on those assembled with larger number of chitosan/CS layers. However, with regard to cell proliferation and viability properties after cultured for 4 days, minor difference was determined between the modified and the unmodified PET films.

Osteoblast Adhesion on Poly(l-lactic Acid)/Polystyrene Demixed Thin Film Blends: Effect of Nanotopography, Surface Chemistry, and Wettability

Biomaterial surface characteristics are critical cues that regulate cell function. We produced a novel series of poly(l-lactic acid) (PLLA) and polystyrene demixed nanotopographic films to provide nonbiological cell-stimulating cues. The increase in PLLA weight fraction (phi) in blend solutions resulted in topography changes in spin-cast films from pit-dominant to island-dominant morphologies having nanoscale depth or height (3-29 nm). Lower molecular weight PLLA segregated to the top surface of demixed films, as observed by X-ray photoelectron spectroscopy and secondary ion mass spectroscopy (SIMS). For phi > or = 0.5, the topmost film layer was predominantly filled with PLLA (>96% by SIMS at 20-A depth). Nanotextured substrata stimulated osteoblastic cell adhesion to a greater degree than did flat PLLA (phi = 1), and this effect was more pronounced for nanoisland (phi = 0.7 and 0.9) relative to nanopit topographies (phi = 0.5). Demixed films having relatively lower water contact angles generally enhanced cell adhesion and spreading. Our results reveal that cell adhesion is affected by surface chemistry, topography, and wettability simultaneously and that nanotextured surfaces may be utilized in regulating cell adhesion.

Influence of channel width on alignment of smooth muscle cells by high-aspect-ratio microfabricated elastomeric cell culture scaffolds

Engineered smooth muscle tissue requires ordered configurations of cells to reproduce native function, and microtechnology offers possibilities for physically and chemically controlling cell organization with high spatial resolution. In this work, poly(dimethylsiloxane) microchannel scaffolds, modified by layer-by-layer self-assembly of polyelectrolytes to promote cell adhesion, were evaluated for use as substrates for the culture of aligned smooth muscle cells. The hypothesis that narrower channels would result in better alignment was tested using channel width dimensions of 20, 30, 40, 50, and 60 microm, in addition to flat (control) surfaces. Alignment of cells was assessed by two different methods, each sensitive to a different aspect of cell alignment from fluorescence micrographs. Two-dimensional fast Fourier transform analysis was performed to analyze the orientation distribution of actin filaments in cells. This was complemented by connectivity analysis of stained nuclei to obtain nuclear orientation distributions. Both methods produced consistent data that support the hypothesis that narrow microchannels promote a highly aligned culture of smooth muscle cells, and the degree of alignment is dependent on the microchannel width. Precise replication of in vivo cell alignment in engineered tissue, with the ability to tailor specific surface chemistries of the scaffold to the desired application, will potentially allow the production of artificial tissue that more closely duplicates the structure and function of native tissue.

Interactions between multivalent ions and exponentially growing multilayers: dissolution and exchange processes

The interactions between multivalent ions (small ions or polyelectrolytes) and two exponentially growing polyelectrolyte multilayers, namely, (HA-PLL)(n)() and (HA-PAH)(n)() films, are investigated (HA = hyaluronic acid, PLL = poly-l-lysine, PAH = poly(allylamine)). Ferrocyanide and ferricyanide ions are used as small ion probes. The most striking finding is that, even though these two ions differ only by one charge unit, the ferrocyanide ions induce a partial dissolution of both multilayers whereas these films remain stable in the presence of ferricyanide ions. The dissolution process of (HA-PLL)(n)() films is more rapid than that of (HA-PAH)(n)() films, indicating a stronger interaction between HA and PAH compared to HA and PLL. This is confirmed by polyelectrolyte exchange experiments: when an (HA-PLL)(n)() multilayer film is put into contact with a PAH solution, PLL is quantitatively exchanged with the PAH chains and transformed into an HA-PAH film, whereas an (HA-PAH)(n)() multilayer remains stable in the presence of a PLL solution.

Multilayered polyelectrolyte films promote the direct and localized delivery of DNA to cells

Multilayered polyelectrolyte films fabricated from plasmid DNA and a hydrolytically degradable synthetic polycation can be used to direct the localized transfection of cells without the aid of a secondary transfection agent. Multilayered assemblies 100 nm thick consisting of alternating layers of synthetic polymer and plasmid DNA encoding for enhanced green fluorescent protein (EGFP) were deposited on quartz substrates using a layer-by-layer fabrication procedure. The placement of film-coated slides in contact with COS-7 cells growing in serum-containing culture medium resulted in gene expression in cells localized under the film-coated portion of the slides. The average percentage of cells expressing EGFP relative to the total number of cells ranged from 4.6% to 37.9%, with an average of 18.6%+/-8.2%, as determined by fluorescence microscopy. In addition to providing a mechanism for the immobilization of DNA at the cell/surface interface, a preliminary analysis of film topography by atomic force microscopy (AFM) demonstrated that polymer /DNA films undergo significant structural rearrangements upon incubation to present surface bound condensed plasmid DNA nanoparticles. These data suggest that the presence of the cationic polymer in these materials may also contribute to the internalization and expression of plasmid. The materials and design principles reported here present an attractive framework for the local or non-invasive delivery of DNA from the surfaces of implantable materials or biomedical devices.

Layer by layer self-assembled polyelectrolyte multilayers with embedded phospholipid vesicles obtained by spraying: integrity of the vesicles

In a previous paper (Michel, M.; Vautier, D.; Voegel, J.-C.; Schaaf, P.; Ball, V. Langmuir 2004, 20, 4835), we showed that phospholipid vesicles can be incorporated into poly(glutamic-acid)/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films built by the alternated dipping of a surface in polyanion and polycation solutions. AFM imaging, quartz crystal microbalance, and ellipsometry suggested that the vesicles remain intact when adhering on the surface. In the present paper, we show that such films can also be realized by spraying both the polyelectrolyte solutions and the vesicles onto the surface. Using such vesicles filled with ferrocyanide ions, we prove by cyclic voltammetry that the sprayed vesicles remain intact when embedded in the multilayers. We show that multilayers containing two distinct layers of intact vesicles separated by several polyanion/polycation bilayers can also be constructed. Polyelectrolyte multilayers containing layers of phospholipid vesicles could act as reservoirs for drug or other biologically active molecules in controlled release bioactive coatings.

Endothelial cell—interactions with polyelectrolyte multilayer films

The seeding of endothelial cells (ECs) on biomaterial surfaces became a major challenge, allowing to improve the non-thrombogenic properties of these surfaces. Recently, the use of polyelectrolyte films has been suggested as a new versatile technique of surface modification aimed at tissue engineering. In this study, we evaluate the adhesion properties of ECs on two types of polyelectrolyte films ending either by poly(D-lysine) (PDL), or poly(allylamine hydrochloride) (PAH), and compared them to data obtained on PDL or PAH monolayers, glass and fibronectin (Fn)-coated glass. ECs seeded on polyelectrolyte films showed a good morphology, allowing ECs to resist physiological shear stress better compared to ECs seeded on glass or Fn. The expression of beta1 integrins was slightly lower on polyelectrolyte films than on control surfaces. However, the phosphorylation of focal adhesion kinase, involved in the transduction of adhesion signal, was not modified on PAH ending films compared to control surfaces; whereas it became lower on PDL ending films. Finally, PAH ending films improve strongly ECs adhesion without disturbing the adhesion mechanism, necessary for the development of a new endothelium. These types of films or similar build-ups could thus be used in the future as a way to modify surfaces for vascular tissue engineering.

In situ determination of thickness and electrical properties of multilayers from weak polyelectrolytes

An electro-optical study of the role that the outermost layer plays in the behavior of a multilayer film of the weak polyelectrolytes poly(acrylic acid) (PAA) and poly(allylamine hydrochloride) (PAH) was carried out. The film surface was enriched with the chains of the last adsorbed polyelectrolyte when a fully ionized polymer was combined with nearly fully charged chains of the other polyelectrolyte. A distinct influence of the chain length on the critical frequency of relaxation of the electro-optical effect was demonstrated, indicating that polarization of condensed counterions of the last adsorbed polymer governs the behavior of the whole film. The multilayer growth, which was found to proceed via a series of adsorption-desorption steps, correlated well with the changes in the electro-optical effect. No indication was found, however, for participation of small ions from the film bulk in creation of the electro-optical effect.

Natural polyelectrolyte films based on layer-by layer deposition of collagen and hyaluronic acid

The aim of the present work was to assemble extracellular matrix components into polyelectrolyte multilayers using the layer-by-layer deposition method. The films are constructed with type-I collagen and hyaluronic acid. The construction exhibits the general features observed during polyelectrolyte multilayer buildup: alternate positive and negative values of the zeta potential of the film during its construction and regular increase of the film thickness with the number, n, of deposition step. This increase is shown to be linear with n. As expected for a linearly growing film, the confocal microscopy shows that when the film is brought in contact with a collagen solution, collagen does not diffuse into the film but interacts only with its outer layer. However, the films are not constituted of homogeneously distributed polyanion/polycation complexes as it is usually observed, but they are formed of fibers as imaged by AFM. The typical width of these fibers increases with the number of deposition steps. Finally, it is found that chondrosarcoma cells spread well and synthesize extracellular matrix components only on the collagen ending films, whereas no cellular matrix was found for HA ending ones. Such architectures may be further functionalized by inclusion of active drugs, peptides, proteins..., and could be used as tunable biomaterial interfaces.

Surface analysis of erodible multilayered polyelectrolyte films: nanometer-scale structure and erosion profiles

Atomic force microscopy (AFM) and scanning electron microscopy (SEM) coupled with ellipsometry have been used to characterize the microscale and nanoscale structures of erodible multilayered films fabricated from degradable polyamine 1 and either sodium poly(styrene sulfonate) (SPS) or plasmid DNA. Striking differences were found in the topography, structures, and erosion profiles of these two materials upon incubation in PBS buffer at 37 degrees C. For films fabricated from SPS, AFM data are consistent with an erosion process that occurs uniformly without the generation of holes or pits over large, micrometer-scale areas. By contrast, films fabricated from plasmid DNA undergo structural rearrangements to present surface-bound particles ranging in size from 50 to 400 nm. Additional characterization of these particulate structures by SEM suggested that they are interpenetrated with or fused to underlying polyelectrolyte layers on the silicon surface, providing a potential mechanism to manipulate the adhesive forces with which these particles are bound to the surface. The erosion profile observed for polymer 1/SPS films suggests that it may be possible to design assemblies that release two film components with well-defined release kinetics. In the context of gene delivery, the presentation of condensed DNA as nanoparticles at these surfaces may be advantageous with respect to stimulating the internalization and processing of DNA by cells. A quantitative understanding of the factors influencing the fabrication, structure, and erosion profiles of these materials will be useful for the design of multilayered assemblies for specific applications in which controlled film erosion or the release of therapeutic materials is desired.

Vascular smooth muscle cells on polyelectrolyte multilayers: hydrophobicity-directed adhesion and growth

Polyelectrolyte multilayer films were employed to support attachment of cultured rat aortic smooth muscle A7r5 cells. Like smooth muscle cells in vivo, cultured A7r5 cells are capable of converting between a nonmotile "contractile" phenotype and a motile "synthetic" phenotype. Polyelectrolyte films were designed to examine the effect of surface charge and hydrophobicity on cell adhesion, morphology, and motility. The hydrophobic nature and surface charge of different polyelectrolyte films significantly affected A7r5 cell attachment and spreading. In general, hydrophobic polyelectrolyte film surfaces, regardless of formal charge, were found to be more cytophilic than hydrophilic surfaces. On the most hydrophobic surfaces, the A7r5 cells adhered, spread, and exhibited little indication of motility, whereas on the most hydrophilic surfaces, the cells adhered poorly if at all and when present on the surface displayed characteristics of being highly motile. The two surfaces that minimized cell adhesion consisted of two varieties of a diblock copolymer containing hydrophilic poly(ethylene oxide) and a copolymer bearing a zwitterionic group AEDAPS, (3-[2-(acrylamido)-ethyldimethyl ammonio] propane sulfonate). Increasing the proportion of AEDAPS in the copolymer decreased the adhesion of cells to the surface. Cells presented with micropatterns of cytophilic and cytophobic surfaces generated by polymer-on-polymer stamping displayed a surface-dependent cytoskeletal organization and a dramatic preference for adhesion to, and spreading on, the cytophilic surface, demonstrating the utility of polyelectrolyte films in manipulating smooth muscle cell adhesion and behavior.

Cellular Response to Gelatin- and Fibronectin-Coated Multilayer Polyelectrolyte Nanofilms

Surface engineering is a critical effort in defining substrates for cell culture and tissue engineering. In this context, multilayer self-assembly is an attractive method for creating novel composites with specialized chemical and physical properties that is currently drawing attention for potential application in this area. In this work, effects of thickness, surface roughness, and surface material of multilayer polymer nanofilms on the growth of rat aortic smooth muscle cells were studied. Polyelectrolyte multilayers (PEMs) electrostatically constructed from poly(allylamine hydrochloride) and poly(sodium 4-styrenesulfonate) (PSS) with gelatin, fibronectin, and PSS surface coatings were evaluated for interactions with smooth muscle cells (SMCs) in an in vitro environment. The results prove that PEMs terminated with cell-adhesive proteins promote the attachment and further growth of SMCs, and that this property is dependent upon the number of layers in the underlying multilayer film architecture. Cell roundness and number of pseudopodia were also influenced by the number of layers in the nanofilms. These findings are significant in that they demonstrate that both surface coatings and underlying architecture of nanofilms affect the morphology and growth of SMCs, which means additional degrees of freedom are available for design of biomaterials. This work supports the excellent potential of nanoassembled ultrathin films for biosurface engineering, and points to a novel perspective for controlling cell-material interaction that can lead to an elegant system for defining the extracellular in vitro environment.

Build-up of Collagen and Hyaluronic Acid Polyelectrolyte Multilayers

We have used a novel polyelectrolyte multilayer (PEM) coating consisting of the polyelectrolytes collagen and hyaluronic acid. The build-up by the layer-by-layer deposition technique is outlined by ex situ and in situ ellipsometric measurements. When collagen was added, the thickness of the PEM was increased, and the refractive index was decreased. Corresponding but opposite effects were noted when hyaluronic acid was added. These changes are considered to be explained by a diffusion mechanism. It was also found that the PEM layers were unstable at physiological pH. However, by cross-linking using N-(3-di-methylaminopropyl)-N'-ethylcarbodiimide together with N-hydroxysuccinimide, a stable PEM layer resulted. These tissue friendly PEM layers are expected to have a great impact in the design of artificial extracellular matrixes. Also, the insertion of fluorescence labels demonstrates the potential for incorporation of other functionalities.

Swelling Behavior of Hyaluronic Acid/Polyallylamine Hydrochloride Multilayer Films

The reversible swelling behavior of multilayer films containing hyaluronic acid and polyallylamine hydrochloride was investigated using in situ ellipsometry, since many of the natural functions and applied uses of hyaluronic acid are related to the extraordinary ability of this biopolymer to swell, and to respond conformationally to the local solution environment. This swelling was observed to be substantial, and depended strongly on the film thickness, the pH conditions used to prepare the films, and the swelling solution pH and ionic strength. The swelling results were also rationalized in terms of the dissociation behavior of the polyelectrolytes in the multilayer assemblies, measured by the zeta potential, on colloidal particles. The films were found to swell by as much as 8 times their dry thickness, and the extent of film hydration was observed to depend on the thickness of the films in a nonlinear fashion. This was related to the internal structure of the films, which is dictated by the assembly pH conditions. In addition, the swelling solution pH and ionic strength influence the electrostatic environment in the films and, in turn, have a substantial effect on the overall swelling behavior.

Polyelectrolyte multilayers functionalized by a synthetic analogue of an anti-inflammatory peptide, α-MSH, for coating a tracheal prosthesis

Polyelectrolyte multilayer films made of poly (L-lysine) (PLL) and poly (L-glutamic acid) (PGA) have been functionalized by covalent binding of a synthetic analogue of the anti-inflammatory peptide, alpha-melanocyte-stimulating hormone (alpha-MSH) to PGA to create biologically active coatings for tracheal prostheses. The morphology and in vivo stability of the films were investigated by atomic force microscopy and confocal laser scanning microscopy, respectively. For the in vivo evaluation, 87 rats were implanted and examined for a period superior to 3 months. Histological analysis, performed 1 month after implantation, showed a fibroblast colonization of the periprosthetic side and a respiratory epithelium type on the endoluminal side of the implant for all the polyelectrolyte coatings tested. However, for prostheses modified by PGA ending multilayer films, a more regular and less obstructive cell layer was observed on the endoluminal side compared to those modified by PLL ending films. Systemic anti-inflammatory IL-10 production was only detected in rats implanted with prostheses functionalized by alpha-MSH, demonstrating, in vivo, the anti-inflammatory activity of the embedded peptide into multilayer architectures.

Effect of thiocyanate counterion condensation on poly(allylamine hydrochloride) chains on the buildup and permeability of polystyrenesulfonate/polyallylamine polyelectrolyte multilayers

In this study, we investigate the buildup of PEI-(PSS-PAH)(n) polyelectrolyte multilayers at pH 7.4 in the presence of either NaCl or NaSCN as a supporting electrolyte. It appears that in the presence of increasing thiocyanate concentrations (from 0.1 to 0.5 M), the thickness increment, obtained from optical waveguide lightmode spectroscopy experiments, increases whereas it stays practically constant for increasing sodium chloride concentrations (between 0.1 and 0.5 M). The hydration of the films differs also markedly between both electrolyte solutions. The differences in the construction of the polyelectrolyte multilayers in the presence of both supporting electrolytes are rationalized in terms of strong SCN(-) condensation on the PAH chains. The occurrence of this ion condensation is indirectly demonstrated by means of zeta potential measurements and directly demonstrated by means of attenuated total internal reflection infrared spectroscopy on the multilayer films. Moreover when the films are built up in the presence of SCN(-), these ions are only slowly exchanged by the Cl(-) ions introduced in the bulk. Conversely the thick films obtained from 0.5 M NaSCN solutions do not deswell when the buffer solution is replaced by a 0.5 M NaCl containing buffer. The permeability of the films constructed in the presence of both sodium salts is also studied by means of cyclic voltametry and is found to be markedly different in the case of films made from five bilayers at 0.5 M salt concentration. This difference is due to the different morphology and porosity of the films constructed in the presence of 0.5 M NaCl and 0.5 M NaSCN.

Multivalent ion/polyelectrolyte exchange processes in exponentially growing multilayers

We show, in this paper that multivalent ferrocyanide anions can penetrate into exponentially growing (PGA/PAH)n multilayer films whatever the nature of the last deposited layer. These ions are not able to diffuse out of the film when it is brought in contact with a pure buffer solution. However, the contact of this film with a poly(allylamine) (PAH) or a poly(L-glutamic acid) (PGA) solution leads to the release of ferrocyanide ions from the multilayer. It is shown that the release of ferrocyanide anions, when the film is in contact with a PGA solution, is due to the diffusion of the PGA chains into the film so that an exchange between ferrocyanide ions and PGA chains takes place inside the film. On the other hand, PAH chains do not diffuse into PGA/PAH multilayers. When the film is then brought in contact with a PAH solution, the PAH chains from the solution are expected to strongly interact with the ferrocyanide ions and thus induce a diffusion mechanism of the multivalent anions out of the film, the film/solution interface playing the role of a sink for these ions. This work thus shows that interactions between multivalent ions and exponentially growing films are much more complex than expected at first sight and that polyelectrolyte multilayers must be seen as dynamic entities in which diffusion and exchange processes can take place.

Controlling primary hepatocyte adhesion and spreading on protein-free polyelectrolyte multilayer films

The development of new methods for fabricating thin films that provide precise control of the three-dimensional topography and cell adhesion could lead to significant advances in the fields of tissue engineering and biosensors. This Communication describes the successful attachment and spreading of primary hepatocytes on polyelectrolyte multilayer (PEM) films without the use of adhesive proteins such as collagen or fibronectin. We demonstrate that the attachment and spreading of primary hepatocytes can be controlled using this layer-by-layer deposition of ionic polymers. In our study, we used synthetic polymers, namely poly(diallyldimethylammonium chloride) (PDAC) and sulfonated poly(styrene) (SPS) as the polycation and polyanion, respectively, to build the multilayers. Primary hepatocytes attached and spread preferentially on SPS surfaces over PDAC surfaces. SPS patterns were formed on PEM surfaces, either by microcontact printing of SPS onto PDAC surfaces or vice versa, to obtain patterns of primary hepatocytes. PEM is a useful technique for fabricating controlled co-cultures with specified cell-cell and cell-surface interactions on a protein-free environment, thus providing flexibility in designing cell-specific surfaces for tissue engineering applications.

Effect of functionalization of multilayered polyelectrolyte films on motoneuron growth

We studied in vitro cell-substrate interaction of motoneurons with functionalized polylectrolyte films. Thin polylectrolyte films were built on glass by alternating polycations, poly(ethylene-imine) PEI, poly(L-lysine) PLL, or poly(allylamine hydrochloride) PAH, and polyanions, poly(sodium-4-styrenesulfonate) PSS or poly(L-glutamic acid) (PGA). These architectures were functionalized with Brain Derived Neurotrophic Factor (BDNF) or Semaphorin 3A (Sema3A). We used Optical Waveguide Lightmode Spectroscopy (OWLS) and Atomic Force Microscopy (AFM) to characterize the architectures. The viability of motoneurons was estimated by the acid phosphatase method, and morphometrical measures were performed to analyse the influence of different architectures on cell morphology. Motoneurons appeared to adhere and spread on all the architectures tested and preferentially on PSS ending films. The viability of motoneurons on polyelectrolyte multilayers was higher compared to polyelectrolyte monolayers. BDNF and Sema3A embedded in the films remained active and thereby create functionalized nanofilms.

Survey of the year 2003 commercial optical biosensor literature

In the year 2003 there was a 17% increase in the number of publications citing work performed using optical biosensor technology compared with the previous year. We collated the 962 total papers for 2003, identified the geographical regions where the work was performed, highlighted the instrument types on which it was carried out, and segregated the papers by biological system. In this overview, we spotlight 13 papers that should be on everyone's 'must read' list for 2003 and provide examples of how to identify and interpret high-quality biosensor data. Although we still find that the literature is replete with poorly performed experiments, over-interpreted results and a general lack of understanding of data analysis, we are optimistic that these shortcomings will be addressed as biosensor technology continues to mature.

Multilayered thin films that sustain the release of functional DNA under physiological conditions

The development of thin films and coatings that control the release of DNA from the surfaces of materials could have a significant impact on localized approaches to gene therapy. Here, we report multilayered polyelectrolyte assemblies that sustain the release of functional plasmid DNA from the surfaces of model substrates under physiological conditions. Multilayered assemblies consisting of alternating layers of plasmid DNA encoding for enhanced green fluorescent protein (EGFP) and a synthetic degradable polyamine were deposited on planar silicon and quartz substrates using a layer-by-layer fabrication process. Film growth was monitored by ellipsometry and UV spectrophotometry and correlated linearly with the number of polymer and plasmid layers deposited. In general, the thickness of deposited layers was found to be a function of both the pH and the ionic strength of the polyelectrolyte solutions used. Films up to 100 nm thick were investigated in this study. These assemblies erode gradually upon incubation in phosphate-buffered saline at 37 degrees C, as determined by ellipsometry and UV spectrophotometry, and sustain the release of incorporated plasmid into the incubation medium for a period of up to 30 h. Characterization of the released plasmid by agarose gel electrophoresis revealed that the DNA was released in a relaxed, open circular, rather than supercoiled, topology; subsequent cell transfection experiments demonstrated that the released plasmid is transcriptionally viable and promotes the expression of EGFP in the COS-7 cell line. These layered materials could represent an approach to the controlled administration of one or more functional DNA constructs from the surfaces of biomedical materials and devices.