Quorum sensing: a new biofouling control paradigm in a membrane bioreactor for advanced wastewater treatment

Biofouling of water treatment membranes: a review of the underlying causes, monitoring techniques and control measures

Biofouling is a critical issue in membrane water and wastewater treatment as it greatly compromises the efficiency of the treatment processes. It is difficult to control, and significant economic resources have been dedicated to the development of effective biofouling monitoring and control strategies. This paper highlights the underlying causes of membrane biofouling and provides a review on recent developments of potential monitoring and control methods in water and wastewater treatment with the aim of identifying the remaining issues and challenges in this area.

Recent developments in anaerobic membrane reactors

Anaerobic membrane reactors (AnMBRs) have recently evolved from aerobic MBRs, with the membrane either external or submerged within the reactor, and can achieve high COD removals (~98%) at hydraulic retention times (HRTs) as low as 3 h. Since membranes stop biomass being washed out, they can enhance performance with inhibitory substrates, at psychrophilic/thermophilic temperatures, and enable nitrogen removal via Anammox. Fouling is important, but addition of activated carbon or resins/precipitants can remove soluble microbial products (SMPs)/colloids and enhance flux. Due to their low energy use and solids production, and solids free effluent, they can enhance nutrient and water recycling. Nevertheless, more work is needed to: compare fouling between aerobic and anaerobic systems; determine how reactor operation influences fouling; evaluate the effect of different additives on membrane fouling; determine whether nitrogen removal can be incorporated into AnMBRs; recover methane solubility from low temperatures effluents; and, establish sound mass and energy balances.

Microbial relevant fouling in membrane bioreactors: influencing factors, characterization, and fouling control

Microorganisms in membrane bioreactors (MBRs) play important roles on degradation of organic/inorganic substances in wastewaters, while microbial deposition/growth and microbial product accumulation on membranes potentially induce membrane fouling. Generally, there is a need to characterize membrane foulants and to determine their relations to the evolution of membrane fouling in order to identify a suitable fouling control approach in MBRs. This review summarized the factors in MBRs that influence microbial behaviors (community compositions, physical properties, and microbial products). The state-of-the-art techniques to characterize biofoulants in MBRs were reported. The strategies for controlling microbial relevant fouling were discussed and the future studies on membrane fouling mechanisms in MBRs were proposed.

Roles of ATP-dependent N-acylhomoserine lactones (AHLs) and extracellular polymeric substances (EPSs) in aerobic granulation

Aerobic granules which form through a cell-to-cell self-immobilization process have been intensively studied and developed for wastewater biotreatment. However, the microbiological origin of this phenomenon is still largely unknown. This study investigated the possible role of metabolic energy in the development of aerobic granules. Results showed that aerobic granulation was positively related to ATP-dependent N-acylhomoserine lactones (AHLs) and extracellular polymeric substances (EPSs) production. Inhibited ATP synthesis by a chemical uncoupler, 3,3',4',5-tetrachlorosalicylanilide, led to significant reduction of AHLs and EPSs production, which in turn prevented aerobic granulation. This study for the first time demonstrated the involvement of ATP-dependent AHLs in aerobic granulation.

Microbial population dynamics and proteomics in membrane bioreactors with enzymatic quorum quenching

Quorum sensing gives rise to biofilm formation on the membrane surface, which in turn causes a loss of water permeability in membrane bioreactors (MBRs) for wastewater treatment. Enzymatic quorum quenching was reported to successfully inhibit the formation of biofilm in MBRs through the decomposition of signal molecules, N-acyl homoserine lactones (AHLs). The aim of this study was to elucidate the mechanisms of quorum quenching in more detail in terms of microbial population dynamics and proteomics. Microbial communities in MBRs with and without a quorum quenching enzyme (acylase) were analyzed using pyrosequencing and compared with each other. In the quorum quenching MBR, the rate of transmembrane pressure (TMP) rise-up was delayed substantially, and the proportion of quorum sensing bacteria with AHL-like autoinducers (such as Enterobacter, Pseudomonas, and Acinetobacter) also decreased in the entire microbial community of mature biofilm in comparison to that in the control MBR. These factors were attributed to the lower production of extracellular polymeric substances (EPS), which are known to play a key role in the formation of biofilm. Proteomic analysis using the Enterobacter cancerogenus strain ATCC 35316 demonstrates the possible depression of protein expression related to microbial attachments to solid surfaces (outer membrane protein, flagellin) and the agglomeration of microorganisms (ATP synthase beta subunit) with the enzymatic quorum quenching. It has been argued that changes in the microbial population, EPS and proteins via enzymatic quorum quenching could inhibit the formation of biofilm, resulting in less biofouling in the quorum quenching MBR.

Targeting N-acyl-homoserine-lactones to mitigate membrane biofouling based on quorum sensing using a biofouling reducer

Exploring novel biological anti-quorum sensing (QS) agents to control membrane biofouling is of great worth in order to allow sustainable performance of membrane bioreactors (MBRs) for wastewater treatment. In recent studies, QS inhibitors have provided evidence of alternative route to control membrane biofouling. This study investigated the role of Piper betle extract (PBE) as an anti-QS agent to mitigate membrane biofouling. Results demonstrated the occurrence of the N-acyl-homoserine-lactone (AHL) autoinducers (AIs), correlate QS activity and membrane biofouling mitigation. The AIs production in bioreactor was confirmed using an indicator strain Agrobacterium tumefaciens (NTL4) harboring plasmid pZLR4. Moreover, three different AHLs were found in biocake using thin layer chromatographic analysis. An increase in extracellular polymeric substances (EPS) and transmembrane pressure (TMP) was observed with AHL activity of the biocake during continuous MBR operation, which shows that membrane biofouling was in close relationship with QS activity. PBE was verified to mitigate membrane biofouling via inhibiting AIs production. SEM analysis further confirmed the effect of PBE on EPS and biofilm formation. These results exhibited that PBE could be a novel agent to target AIs for mitigation of membrane biofouling. Further work can be carried out to purify the active compound of Piper betle extract to target the QS to mitigate membrane biofouling.

Quorum sensing of bacteria and trans-kingdom interactions of N-acyl homoserine lactones with eukaryotes

Many environmental and interactive important traits of bacteria, such as antibiotic, siderophore or exoenzyme (like cellulose, pectinase) production, virulence factors of pathogens, as well as symbiotic interactions, are regulated in a population density-dependent manner by using small signaling molecules. This phenomenon, called quorum sensing (QS), is widespread among bacteria. Many different bacterial species are communicating or "speaking" through diffusible small molecules. The production often is sophisticatedly regulated via an autoinducing mechanism. A good example is the production of N-acyl homoserine lactones (AHL), which occur in many variations of molecular structure in a wide variety of Gram-negative bacteria. In Gram-positive bacteria, other compounds, such as peptides, regulate cellular activity and behavior by sensing the cell density. The degradation of the signaling molecule--called quorum quenching--is probably another important integral part in the complex quorum sensing circuit. Most interestingly, bacterial quorum sensing molecules also are recognized by eukaryotes that are colonized by QS-active bacteria. In this case, the cross-kingdom interaction can lead to specific adjustment and physiological adaptations in the colonized eukaryote. The responses are manifold, such as modifications of the defense system, modulation of the immune response, or changes in the hormonal status and growth responses. Thus, the interaction with the quorum sensing signaling molecules of bacteria can profoundly change the physiology of higher organisms too. Higher organisms are obligatorily associated with microbial communities, and these truly multi-organismic consortia, which are also called holobionts, can actually be steered via multiple interlinked signaling substances that originate not only from the host but also from the associated bacteria.

The presence and role of bacterial quorum sensing in activated sludge

Activated sludge used for wastewater treatment globally is composed of a high‐density microbial community of great biotechnological significance. In this study the presence and purpose of quorum sensing via N‐acylated‐l‐homoserine lactones (AHLs) in activated sludge was explored. The presence of N‐heptanoyl‐l‐homoserine lactone in organic extracts of sludge was demonstrated along with activation of a LuxR‐based AHL monitor strain deployed in sludge, indicating AHL‐mediated gene expression is active in sludge flocculates but not in the bulk aqueous phase. Bacterial isolates from activated sludge were screened for AHL production and expression of phenotypes commonly but not exclusively regulated by AHL‐mediated gene transcription. N‐acylated‐l‐homoserine lactone and exoenzyme production were frequently observed among the isolates. N‐acylated‐l‐homoserine lactone addition to sludge upregulated chitinase activity and an AHL‐ and chitinase‐producing isolate closely related to Aeromonas hydrophila was shown to respond to AHL addition with upregulation of chitinase activity. N‐acylated‐l‐homoserine lactones produced by this strain were identified and genes ahyI/R and chiA, encoding AHL production and response and chitinase activity respectively, were sequenced. These experiments provide insight into the relationship between AHL‐mediated gene expression and exoenzyme activity in activated sludge and may ultimately create opportunities to improve sludge performance.

Control of membrane biofouling in MBR for wastewater treatment by quorum quenching bacteria encapsulated in microporous membrane

Recently, enzymatic quorum quenching has proven its potential as an innovative approach for biofouling control in the membrane bioreactor (MBR) for advanced wastewater treatment. However, practical issues on the cost and stability of enzymes are yet to be solved, which requires more effective quorum quenching methods. In this study, a novel quorum quenching strategy, interspecies quorum quenching by bacterial cell, was elaborated and proved to be efficient and economically feasible biofouling control in MBR. A recombinant Escherichia coli which producing N-acyl homoserine lactonase or quorum quenching Rhodococcus sp. isolated from a real MBR plant was encapsulated inside the lumen of microporous hollow fiber membrane, respectively. The porous membrane containing these functional bacteria (i.e., "microbial-vessel") was put into the submerged MBR to alleviate biofouling on the surface of filtration membrane. The effect of biofouling inhibition by the microbial-vessel was evaluated over 80 days of MBR operation. Successful control of biofouling in a laboratory scale MBR suggests that the biofouling control through the interspecies quorum quenching could be expanded to the plant scale of MBR and various environmental engineering systems with economic feasibility.

Quorum quenching revisited--from signal decays to signalling confusion

In a polymicrobial community, while some bacteria are communicating with neighboring cells (quorum sensing), others are interrupting the communication (quorum quenching), thus creating a constant arms race between intercellular communication. In the past decade, numerous quorum quenching enzymes have been found and initially thought to inactivate the signalling molecules. Though this is widely accepted, the actual roles of these quorum quenching enzymes are now being uncovered. Recent evidence extends the role of quorum quenching to detoxification or metabolism of signalling molecules as food and energy source; this includes “signalling confusion”, a term coined in this paper to refer to the phenomenon of non-destructive modification of signalling molecules. While quorum quenching has been explored as a novel anti-infective therapy targeting, quorum sensing evidence begins to show the development of resistance against quorum quenching.

Monitoring bacterial twitter: does quorum sensing determine the behavior of water and wastewater treatment biofilms?

Bacteria have their own form of "twitter" communication, described as quorum sensing (QS), where bacteria emit and sense chemical signal molecules as a means to gauge population density and control gene expression. Many QS-controlled genes relate to biofilm formation and function and may be important for some water and wastewater treatment biofilms. There is a need to better understand bacterial QS, the bacteria biofilm aspects influenced by QS in engineered reactors, and to assess how designs and operations might be improved by taking this signaling into account. This paper provides a critical review of QS and how it relates to biofilms in engineered water and wastewater treatment systems and identifies needs for future research.

Influence and mechanism of N-(3-oxooxtanoyl)-L-homoserine lactone (C8-oxo-HSL) on biofilm behaviors at early stage

N-acyl-homoserines quenching, enzymatic quenching of bacterial quorum sensing, has recently applied to mitigate biofilm in membrane bioreactor. However, the effect of AHLs on the behavior of biofilm formation is still sparse. In this study, Pseudomonas aeruginosa biofilm was formed on ultra-filtration membrane under a series of N-(3-oxooxtanoyl)-L-homoserine lactone (Cs-oxo-HSL) concentrations. Diffusing C8-oxo-HSL increased the growth rate of cells on biofilm where the concentration of C8-oxo-HSL was over 10(-7) g/L. The C8-oxo-HSL gradient had no observable influence on cell density and extracellular polymeric substances of biofilm with over 10(-7) g/L C8-oxo-HSL. Surprisingly, 10(-11)-10(-8) g/L of C8-oxo-HSL had no effect on cell growth in liquid culture. The cell analysis demonstrated that the quorum sensing system might enhance the growth of neighboring cells in contact with surfaces into biofilm and may influence the structure and organization of biofilm.

Impacts of quorum sensing on microbial metabolism and human health

Bacteria were considered to be lonely 'mutes' for hundreds of years. However, recently it was found that bacteria usually coordinate their behaviors at the population level by producing (speaking), sensing (listening), and responding to small signal molecules. This so-called quorum sensing (QS) regulation enables bacteria to live in a 'society' with cell-cell communication and controls many important bacterial behaviors. In this chapter, QS systems and their signal molecules for Gram-negative and Gram-positive bacteria are introduced. Most interestingly, QS regulates the important bacterial behaviors such as metabolism and pathogenesis. QS-regulated microbial metabolism includes antibiotic synthesis, pollutant biodegradation, and bioenergy production, which are very relevant to human health. QS is also well-known for its involvement in bacterial pathogenesis, such as iin nfections by Pseudomonas aeruginosa and Staphylococcus aureus. Novel disease diagnosis strategies and antimicrobial agents have also been developed based on QS regulation on bacterial infections. In addition, to meet the requirements for the detection/quantification of QS signaling molecules for research and application, different biosensors have been constructed, which will also be reviewed here. QS regulation is essential to bacterial survival and important to human health. A better understanding of QS could lead better control/manipulation of bacteria, thus making them more helpful to people.

Chitosan/albumin/CaCO3 as mimics for membrane bioreactor fouling: genesis of structural mineralized-EPS-building blocks and cake layer compressibility

Membrane bioreactor biofouling is usually described as an extracellular matrix in which biopolymers, inorganic salts and active microbes co-exist. For that reason, biomineralization (BM) models can be useful to describe the spatial organization and environmental constraints within the referred scenario. BM arguments were utilized as background in order to (1) evaluate CaCO(3) influence on flux decline; pore blocking and cake layer properties (resistance, permeability and compressibility) in a wide range of Chitosan/Bovine serum albumin (BSA) mixtures during step-pressure runs and, (2) perform membrane autopsies in order to explore the genesis of mineralized extracellular building blocks (MEBB) during cake layer build up. Using low molecular weight chitosan (LC) and BSA, 2 L of 5 LC/BSA mixtures (0.25-1.85 ratio) were pumped to an external ultra filtration (UF) membrane (23.5cm(2), hydrophobic, piezoelectric, 100kDa as molecular weight cut-off). Eight different pressure steps (40±7 to 540±21kPa) were applied. Each pressure step was held for 900 s. CaCO(3) was added to LC/BSA mixtures at 0.5, 1.5 and 3mM in order to create MEBB during the filtration tests. Membrane autopsies were performed after the filtration tests using thermo gravimetric, scanning microscopy and specific membrane mass (mgcm(-2)) analyses. Biopolymer-CaCO(3) step-pressure filtration created compressible cake layers (with inner voids). The formation of an internal skeleton of MEBB may contribute to irreversible fouling consolidation. A hypothesis for MEBB genesis and development was set forth.

Microbial linguistics: perspectives and applications of microbial cell-to-cell communication

Inter-cellular communication via diffusible small molecules is a defining character not only of multicellular forms of life but also of single-celled organisms. A large number of bacterial genes are regulated by the change of chemical milieu mediated by the local population density of its own species or others. The cell density-dependent "autoinducer" molecules regulate the expression of those genes involved in genetic competence, biofilm formation and persistence, virulence, sporulation, bioluminescence, antibiotic production, and many others. Recent innovations in recombinant DNA technology and micro-/nano-fluidics systems render the genetic circuitry responsible for cell-to-cell communication feasible to and malleable via synthetic biological approaches. Here we review the current understanding of the molecular biology of bacterial intercellular communication and the novel experimental protocols and platforms used to investigate this phenomenon. A particular emphasis is given to the genetic regulatory circuits that provide the standard building blocks which constitute the syntax of the biochemical communication network. Thus, this review gives focus to the engineering principles necessary for rewiring bacterial chemo-communication for various applications, ranging from population-level gene expression control to the study of host-pathogen interactions.

Linking microbial community structure to membrane biofouling associated with varying dissolved oxygen concentrations

In order to elucidate how dissolved oxygen (DO) concentration influenced the generation of extracellular polymeric substance (EPS) and soluble microbial products (SMP) in mixed liquor and biocake, 16S rDNA fingerprinting analyses were performed to investigate the variation of the microbial community in an aerobic membrane bioreactor (MBR). The function of microbial community structure was proved to be ultimately responsible for biofouling. Obvious microbial community succession from the subphylum of Betaproteobacteria to Deltaproteobacteria was observed in biocake. High concentration of EPS in biocake under the low DO concentration (0.5 mg L(-1)) caused severe biofouling. The correlation coefficient of membrane fouling rate with EPS content in biocake (0.9941-0.9964) was much higher than that in mixed liquor (0.6689-0.8004).

Enzyme-immobilized nanofiltration membrane to mitigate biofouling based on quorum quenching

Recently, enzymatic quorum quenching (in the form of a free enzyme or an immobilized form on a bead) was successfully applied to a submerged membrane bioreactor with a microfiltration membrane for wastewater treatment as a novel approach to control membrane biofouling. In this study, a quorum quenching enzyme (acylase) was directly immobilized onto a nanofiltration membrane to mitigate biofouling in a nanofiltration process. In a flow cell experiment, the acylase-immobilized membrane with quorum quenching activity prohibited the formation of mushroom-shaped mature biofilm due to the reduced secretion of extracellular polymeric substances (EPS). The acylase-immobilized membrane maintained more than 90% of its initial enzyme activity for more than 20 iterative cycles of reaction and washing procedure. In the lab-scale continuous crossflow nanofiltration system operated at a constant pressure of 2 bar, the flux with the acylase-immobilized nanofiltration (NF) membrane was maintained at more than 90% of its initial flux after a 38-h operation, whereas that with the raw NF membrane decreased to 60% accompanied with severe biofouling. The quorum quenching activity of the acylase-immobilized membrane was also confirmed by visualizing the spatial distribution of cells and polysaccharides on the surface of each membrane using confocal laser scanning microscopy (CLSM) image analysis technique.

Characterization of a phosphotriesterase-like lactonase from Sulfolobus solfataricus and its immobilization for disruption of quorum sensing

SsoPox, a bifunctional enzyme with organophosphate hydrolase and N-acyl homoserine lactonase activities from the hyperthermophilic archaeon Sulfolobus solfataricus, was overexpressed and purified from recombinant Pseudomonas putida KT2440 with a yield of 9.4 mg of protein per liter of culture. The enzyme has a preference for N-acyl homoserine lactones (AHLs) with acyl chain lengths of at least 8 carbon atoms, mainly due to lower K(m) values for these substrates. The highest specificity constant obtained was for N-3-oxo-decanoyl homoserine lactone (k(cat)/K(m) = 5.5 × 10(3) M(-1)·s(-1)), but SsoPox can also degrade N-butyryl homoserine lactone (C(4)-HSL) and N-oxo-dodecanoyl homoserine lactone (oxo-C(12)-HSL), which are important for quorum sensing in our Pseudomonas aeruginosa model system. When P. aeruginosa PAO1 cultures were grown in the presence of SsoPox-immobilized membranes, the production of C(4)-HSL- and oxo-C(12)-HSL-regulated virulence factors, elastase, protease, and pyocyanin were significantly reduced. This is the first demonstration that immobilized quorum-quenching enzymes can be used to attenuate the production of virulence factors controlled by quorum-sensing signals.

Characterization and effect of biofouling on polyamide reverse osmosis and nanofiltration membrane surfaces

Biofouling is a major reason for flux decline in the performance of membrane-based water and wastewater treatment plants. Initial biochemical characterization of biofilm formation potential and biofouling on two commercially available membrane surfaces from FilmTec Corporation were investigated without filtration in laboratory rotating disc reactor systems. These surfaces were polyamide aromatic thin-film reverse osmosis (RO) (BW30) and semi-aromatic nanofiltration (NF270) membranes. Membrane swatches were fixed on removable coupons and exposed to water with indigenous microorganisms supplemented with 1.5 mg l(-1) organic carbon under continuous flow. After biofilms formed, the membrane swatches were removed for analyses. Staining and epifluorescence microscopy revealed more cells on the RO than on the NF surface. Based on image analyses of 5-μm thick cryo-sections, the accumulation of hydrated biofoulants on the RO and NF surfaces exceeded 0.74 and 0.64 μm day(-1), respectively. As determined by contact angle the biofoulants increased the hydrophobicity up to 30° for RO and 4° for NF surfaces. The initial difference between virgin RO and NO hydrophobicities was ∼5°, which increased up to 25° after biofoulant formation. The initial roughness of RO and NF virgin surfaces (75.3 nm and 8.2 nm, respectively) increased to 48 nm and 39 nm after fouling. A wide range of changes of the chemical element mass percentages on membrane surfaces was observed with X-ray photoelectron spectroscopy. The initial chemical signature on the NF surface was better restored after cleaning than the RO membrane. All the data suggest that the semi-aromatic NF surface was more biofilm resistant than the aromatic RO surface. The morphology of the biofilm and the location of active and dead cell zones could be related to the membrane surface properties and general biofouling accumulation was associated with changes in the surface chemistry of the membranes, suggesting the validity of the combination of these novel approaches for initial assessment of membrane performance.

Control and cleaning of membrane biofouling by energy uncoupling and cellular communication

This study investigated possible biological control of membrane biofouling and membrane cleaning by disrupting energy metabolism of microorganisms. Results showed that 2,4-dinitrophenol (DNP), a typical uncoupler, could not only significantly inhibit membrane biofouling but also enhance biofilm detachment from nylon membrane. Inhibited ATP synthesis by a chemical uncoupler resulted in lowered production of autoinducer-2 (AI-2). The standard dead-end microfiltration tests further confirmed that the reduced AI-2 was positively correlated to the reduced fouling resistance of nylon membranes. It appears that inhibition of energy metabolism would be a promising alternative for control and cleaning of membrane biofouling.

Control of microbial attachment by inhibition of ATP and ATP-mediated autoinducer-2

In this study, 2,4-dinitrophenol (DNP), a typical chemical uncoupler, was employed to investigate the possible roles of ATP and autoinducer-2 (AI-2) of suspended microorganisms in attachment onto nylon membrane and glass slide surfaces. Results showed that DNP could disrupt ATP synthesis, subsequently led to a reduced production of AI-2 which is a common signaling molecule for cellular communication. Attachment of suspended microorganisms exposed to DNP was significantly suppressed as compared to microorganisms without contact with DNP. These suggest that an energized state of suspended microorganisms would favor microbial attachment to both nylon membrane and glass slide surfaces. The extent of microbial attachment was found to be positively related to the AI-2 content of microorganisms. This study offers insights into the control of biofouling by preventing initial microbial attachment through inhibition of energy metabolism.

Reduced bacterial deposition and attachment by quorum-sensing inhibitor 4-nitro-pyridine-N-oxide: the role of physicochemical effects

Surface-attached chemical groups that resist protein adhesion are commonly characterized as being hydrophilic, H-bond acceptors, non-H-bond donors, and electrically neutral. Quorum-sensing (QS) inhibitor 4-nitropyridine-N-oxide (4-NPO) that previously was found to decrease Pseudomonas aeruginosa biofilm formation possesses all of these characteristics, making this molecule an ideal antiadhesive compound. It was hypothesized that once 4-NPO adsorbs to either the solid surface or bacteria, resultant changes in the physical-chemical surface properties of the solid surface and bacteria will reduce the extent of bacterial adhesion. These physical-chemical effects take place prior to the commencement of already well-established QS biofilm-inhibition mechanisms. Bacterial adhesion experiments to silica conducted in quartz crystal microbalance with dissipation (QCM-D) and parallel plate flow cells demonstrated that 4-NPO reduces bacterial adhesion to silica-coated surfaces by the adsorption of 4-NPO to the silica surface as well to the outer membrane of both gram-negative P. aeruginosa PAO1 and gram-positive Staphylococcus aureus. 4-NPO effectively neutralizes both the bacterial and silica surface charge, and it is proposed that this neutralization of local surface charge heterogeneities by 4-NPO adsorption is the mechanism responsible for decelerating rates of bacterial deposition.

Ultrafiltration membranes incorporating amphiphilic comb copolymer additives prevent irreversible adhesion of bacteria

We examined the resistance to bacterial adhesion of a novel polyacrylonitrile (PAN) ultrafiltration membrane incorporating the amphiphilic comb copolymer additive, polyacrylonitrile-graft-polyethylene oxide (PAN-g-PEO). The adhesion of bacteria (E. coli K12) and the reversibility of adhered bacteria were tested with the novel membrane, and the behavior was compared to a commercial PAN ultrafiltration membrane. Under static (no flow) bacterial adhesion tests, we observed no bacterial adhesion to the PAN/PAN-g-PEO membrane at all ionic strengths tested, even with the addition of calcium ions. In contrast, significant adhesion of bacterial cells was observed on the commercial PAN membrane, with increased cell adhesion at higher ionic strengths and in the presence of calcium ions. Under crossflow filtration conditions, initial bacterial deposition rate increased with ionic strength and with addition of calcium ions for both membranes, with generally lower bacterial deposition rate with the PAN/PAN-g-PEO membrane. However, deposited bacteria were readily removed (between 97 and 100%) from the surface of the PAN/PAN-g-PEO membrane upon increasing the crossflow and eliminating the permeate flow (i.e., no applied transmembrane pressure), suggesting reversible adhesion of bacteria. In contrast, bacterial adhesion on the commercial PAN membrane was irreversible, with approximately 50% removal of adhered bacteria at moderate ionic strengths (10 and 30 mM) and less than 25% removal at high ionic strength (100 mM). The resistance to bacterial adhesion of the PAN/PAN-g-PEO membrane was further analyzed via measurement of interaction forces with atomic force microscopy (AFM). No adhesion forces were detected between a carboxylated colloid probe and the PAN/PAN-g-PEO membrane, while the probe exhibited strong adhesion to the commercial PAN membrane, consistent with the bacterial adhesion tests. The exceptional resistance of the PAN/PAN-g-PEO membrane to bacterial adhesion is attributable to steric repulsion imparted by the dense brush layer of polyethylene oxide (PEO) chains.

Applications of quorum sensing in biotechnology

Many unicellular microorganisms use small signaling molecules to determine their local concentration. The processes involved in the production and recognition of these signals are collectively known as quorum sensing (QS). This form of cell-cell communication is used by unicellular microorganisms to co-ordinate their activities, which allows them to function as multi-cellular systems. Recently, several groups have demonstrated artificial intra-species and inter-species communication through synthetic circuits which incorporate components of bacterial QS systems. Engineered QS-based circuits have a wide range of applications such as production of biochemicals, tissue engineering, and mixed-species fermentations. They are also highly useful in designing microbial biosensors to identify bacterial species present in the environment and within living organisms. In this review, we first provide an overview of bacterial QS systems and the mechanisms developed by bacteria and higher organisms to obstruct QS communications. Next, we describe the different ways in which researchers have designed QS-based circuits and their applications in biotechnology. Finally, disruption of quorum sensing is discussed as a viable strategy for preventing the formation of harmful biofilms in membrane bioreactors and marine transportation.

Magnetic enzyme carrier for effective biofouling control in the membrane bioreactor based on enzymatic quorum quenching

Quorum quenching, enzymatic quenching of bacterial quorum sensing, has recently proven its potential as a novel approach of biofouling control in the membrane bioreactor (MBR) for advanced wastewater treatment. However, the short catalytic lifetime and difficulty in recovering free enzyme hamper the successful application of the quorum quenching technique in the MBR under a long-term continuous operation. In this study, a magnetic enzyme carrier (MEC) was prepared by immobilizing the quorum quenching enzyme (acylase) on magnetic particles to overcome the technical limitations of free enzyme. The MEC showed no activity decrease under both continuous shaking for 14 days and 29 iterative cycles of reuse. Furthermore, the comparison of the MEC with free enzyme in a batch type MBR showed that the MEC efficiently alleviated the membrane biofouling and showed a great advantage over free enzyme in terms of recycled use and stability in mixed liquor. When the MEC was applied to the lab scale MBR in a continuous operation, it also enhanced the membrane permeability to a large extent compared with a conventional MBR with no enzyme.