Oxidation of ethane to ethanol by N2O in a metal-organic framework with coordinatively unsaturated iron(II) sites

Synthesis and Characterization of a Tetrapodal NO4(4-) Ligand and Its Transition Metal Complexes

We present the synthesis and characterization of alkali metal salts of the new tetraanionic, tetrapodal ligand 2,2'-(pyridine-2,6-diyl)bis(2-methylmalonate) (A4[PY(CO2)4], A = Li(+), Na(+), K(+), and Cs(+)), via deprotection of the neutral tetrapodal ligand tetraethyl 2,2'-(pyridine-2,6-diyl)bis(2-methylmalonate) (PY(CO2Et)4). The [PY(CO2)4](4-) ligand is composed of an axial pyridine and four equatorial carboxylate groups and must be kept at or below 0 °C to prevent decomposition. Exposing it to a number of divalent first-row transition metals cleanly forms complexes to give the series K2[(PY(CO2)4)M(H2O)] (M = Mn(2+), Fe(2+), Co(2+), Ni(2+), Zn(2+)). The metal complexes were comprehensively characterized via single-crystal X-ray diffraction, (1)H NMR and UV-vis absorption spectroscopy, and cyclic voltammetry. Crystal structures reveal that [PY(CO2)4](4-) coordinates in a pentadentate fashion to allow for a nearly ideal octahedral coordination geometry upon binding an exogenous water ligand. Additionally, depending on the nature of the charge-balancing countercation (Li(+), Na(+), or K(+)), the [(PY(CO2)4)M(H2O)](2-) complexes can assemble in the solid state to form one-dimensional channels filled with water molecules. Aqueous electrochemistry performed on [(PY(CO2)4)M(H2O)](2-) suggested accessible trivalent oxidation states for the Fe, Co, and Ni complexes, and the trivalent Co(3+) species [(PY(CO2)4)Co(OH)](2-) could be isolated via chemical oxidation. The successful synthesis of the [PY(CO2)4](4-) ligand and its transition metal complexes illustrates the still-untapped versatility within the tetrapodal ligand family, which may yet hold promise for the isolation of more reactive and higher-valent metal complexes.

Recent Advances in the Synthesis, Characterization and Application of Zn+-containing Heterogeneous Catalysts

Monovalent Zn+ (3d104s1) systems possess a special electronic structure that can be exploited in heterogeneous catalysis and photocatalysis, though it remains challenge to synthesize Zn+-containing materials. By careful design, Zn+-related species can be synthesized in zeolite and layered double hydroxide systems, which in turn exhibit excellent catalytic potential in methane, CO and CO2 activation. Furthermore, by utilizing advanced characterization tools, including electron spin resonance, X-ray absorption fine structure and density functional theory calculations, the formation mechanism of the Zn+ species and their structure-performance relationships can be understood. Such advanced characterization tools guide the rational design of high-performance Zn+-containing catalysts for efficient energy conversion.

Selective, Tunable O2 Binding in Cobalt(II)-Triazolate/Pyrazolate Metal-Organic Frameworks

The air-free reaction of CoCl2 with 1,3,5-tri(1H-1,2,3-triazol-5-yl)benzene (H3BTTri) in N,N-dimethylformamide (DMF) and methanol leads to the formation of Co-BTTri (Co3[(Co4Cl)3(BTTri)8]2·DMF), a sodalite-type metal-organic framework. Desolvation of this material generates coordinatively unsaturated low-spin cobalt(II) centers that exhibit a strong preference for binding O2 over N2, with isosteric heats of adsorption (Qst) of -34(1) and -12(1) kJ/mol, respectively. The low-spin (S = 1/2) electronic configuration of the metal centers in the desolvated framework is supported by structural, magnetic susceptibility, and computational studies. A single-crystal X-ray structure determination reveals that O2 binds end-on to each framework cobalt center in a 1:1 ratio with a Co-O2 bond distance of 1.973(6) Å. Replacement of one of the triazolate linkers with a more electron-donating pyrazolate group leads to the isostructural framework Co-BDTriP (Co3[(Co4Cl)3(BDTriP)8]2·DMF; H3BDTriP = 5,5'-(5-(1H-pyrazol-4-yl)-1,3-phenylene)bis(1H-1,2,3-triazole)), which demonstrates markedly higher yet still fully reversible O2 affinities (Qst = -47(1) kJ/mol at low loadings). Electronic structure calculations suggest that the O2 adducts in Co-BTTri are best described as cobalt(II)-dioxygen species with partial electron transfer, while the stronger binding sites in Co-BDTriP form cobalt(III)-superoxo moieties. The stability, selectivity, and high O2 adsorption capacity of these materials render them promising new adsorbents for air separation processes.

Mononuclear Nonheme High-Spin (S=2) versus Intermediate-Spin (S=1) Iron(IV)-Oxo Complexes in Oxidation Reactions

Mononuclear nonheme high-spin (S=2) iron(IV)-oxo species have been identified as the key intermediates responsible for the C-H bond activation of organic substrates in nonheme iron enzymatic reactions. Herein we report that the C-H bond activation of hydrocarbons by a synthetic mononuclear nonheme high-spin (S=2) iron(IV)-oxo complex occurs through an oxygen non-rebound mechanism, as previously demonstrated in the C-H bond activation by nonheme intermediate (S=1) iron(IV)-oxo complexes. We also report that C-H bond activation is preferred over C=C epoxidation in the oxidation of cyclohexene by the nonheme high-spin (HS) and intermediate-spin (IS) iron(IV)-oxo complexes, whereas the C=C double bond epoxidation becomes a preferred pathway in the oxidation of deuterated cyclohexene by the nonheme HS and IS iron(IV)-oxo complexes. In the epoxidation of styrene derivatives, the HS and IS iron(IV) oxo complexes are found to have similar electrophilic characters.

Anisotropic compressibility of the coordination polymer emim[Mn(btc)]

The effect of pressure on the crystal structure of a coordination polymer, emim[Mn(II)(btc)] (emim = 1-ethyl,3-methyl imidazolium cation, btc = 1,3,5-benzene-tricarboxylate), was investigated with single-crystal X-ray diffraction. At 4.3 GPa the unit-cell volume had decreased by 14% compared with ambient conditions. The unit-cell contraction is highly anisotropic, with the a- and b-axes decreasing by 5.5 and 9.5%, respectively, and the c-axis compressing a mere 0.25% up to 1.7 GPa followed by a 0.2% expansion between 1.7 and 4.3 GPa. The 0.2% increase in length of the c-axis in this interval happens above the quasi-hydrostatic limit of the pressure-transmitting medium and therefore it might be a consequence of strain gradients. Under ambient conditions, two MnO6 units are connected by two carboxylate ligands to form dimeric units. On increasing pressure, a non-bonded O atom from a bridging carboxylate group approaches the Mn atom, with the Mn-O distance decreasing from 2.866 (1) Å at 0.3 GPa to 2.482 (6) Å at 4.3 GPa, increasing the coordination environment of the Mn ion from six- to seven-coordinated.

Intercalation of Coordinatively Unsaturated Fe(III) Ion within Interpenetrated Metal-Organic Framework MOF-5

Coordinatively unsaturated Fe(III) metal sites were successfully incorporated into the iconic MOF-5 framework. This new structure, Fe(III) -iMOF-5, is the first example of an interpenetrated MOF linked through intercalated metal ions. Structural characterization was performed with single-crystal and powder XRD, followed by extensive analysis by spectroscopic methods and solid-state NMR, which reveals the paramagnetic ion through its interaction with the framework. EPR and Mössbauer spectroscopy confirmed that the intercalated ions were indeed Fe(III) , whereas DFT calculations were employed to ascertain the unique pentacoordinate architecture around the Fe(III) ion. Interestingly, this is also the first crystallographic evidence of pentacoordinate Zn(II) within the MOF-5 SBU. This new MOF structure displays the potential for metal-site addition as a framework connector, thus creating further opportunity for the innovative development of new MOF materials.

Metal-Organic Frameworks as Catalysts for Oxidation Reactions

This Concept is aimed at describing the current state of the art in metal-organic frameworks (MOFs) as heterogeneous catalysts for liquid-phase oxidations, focusing on three important substrates, namely, alkenes, alkanes and alcohols. Emphases are on the nature of active sites that have been incorporated within MOFs and on future targets to be set in this area. Thus, selective alkene epoxidation with peroxides or oxygen catalyzed by constitutional metal nodes of MOFs as active sites are still to be developed. Moreover, no noble metal-free MOF has been reported to date that can act as a general catalyst for the aerobic oxidation of primary and secondary aliphatic alcohols. In contrast, in the case of alkanes, a target should be to tune the polarity of MOF internal pores to control the outcome of the autooxidation process, resulting in the selective formation of alcohol/ketone mixtures at high conversion.

A computational study of CH4 storage in porous framework materials with metalated linkers: connecting the atomistic character of CH4 binding sites to usable capacity

Open-metal sites are shown to significantly increase the CH₄ storage capacity of porous materials. It is shown that the capacity is not determined solely by their CH₄ affinity, but also by their geometry as well as by guest molecules.

To store natural gas (NG) inexpensively at adequate densities for use as a fuel in the transportation sector, new porous materials are being developed. This work uses computational methods to explore strategies for improving the usable methane storage capacity of adsorbents, including metal–organic frameworks (MOFs), that feature open-metal sites incorporated into their structure by postsynthetic modification. The adsorption of CH₄ on several open-metal sites is studied by calculating geometries and adsorption energies and analyzing the relevant interaction factors. Approximate site-specific adsorption isotherms are obtained, and the open-metal site contribution to the overall CH₄ usable capacity is evaluated. It is found that sufficient ionic character is required, as exemplified by the strong CH₄ affinities of 2,2′-bipyridine-CaCl₂ and Mg, Ca-catecholate. In addition, it is found that the capacity of a single metal site depends not only on its affinity but also on its geometry, where trigonal or “bent” low-coordinate exposed sites can accommodate three or four methane molecules, as exemplified by Ca-decorated nitrilotriacetic acid. The effect of residual solvent molecules at the open-metal site is also explored, with some positive conclusions. Not only can residual solvent stabilize the open-metal site, surprisingly, solvent molecules do not necessarily reduce CH₄ affinity, but can contribute to increased usable capacity by modifying adsorption interactions.

Selective Dimerization of Ethylene to 1-Butene with a Porous Catalyst

Current heterogeneous catalysts lack the fine steric and electronic tuning required for catalyzing the selective dimerization of ethylene to 1-butene, which remains one of the largest industrial processes still catalyzed by homogeneous catalysts. Here, we report that a metal-organic framework catalyzes ethylene dimerization with a combination of activity and selectivity for 1-butene that is premier among heterogeneous catalysts. The capacity for mild cation exchange in the material MFU-4l (MFU-4l = Zn5Cl4(BTDD)3, H2BTDD = bis(1H-1,2,3-triazolo[4,5-b],[4',5'-i])dibenzo[1,4]dioxin) was leveraged to create a well-defined and site-isolated Ni(II) active site bearing close structural homology to molecular tris-pyrazolylborate complexes. In the presence of ethylene and methylaluminoxane, the material consumes ethylene at a rate of 41,500 mol per mole of Ni per hour with a selectivity for 1-butene of up to 96.2%, exceeding the selectivity reported for the current industrial dimerization process.

One-pot Synthesis of Metal-Organic Frameworks with Encapsulated Target Molecules and Their Applications for Controlled Drug Delivery

Many medical and chemical applications require target molecules to be delivered in a controlled manner at precise locations. Metal-organic frameworks (MOFs) have high porosity, large surface area, and tunable functionality and are promising carriers for such purposes. Current approaches for incorporating target molecules are based on multistep postfunctionalization. Here, we report a novel approach that combines MOF synthesis and molecule encapsulation in a one-pot process. We demonstrate that large drug and dye molecules can be encapsulated in zeolitic imidazolate framework (ZIF) crystals. The molecules are homogeneously distributed within the crystals, and their loadings can be tuned. We show that ZIF-8 crystals loaded with the anticancer drug doxorubicin (DOX) are efficient drug delivery vehicles in cancer therapy using pH-responsive release. Their efficacy on breast cancer cell lines is higher than that of free DOX. Our one-pot process opens new possibilities to construct multifunctional delivery systems for a wide range of applications.

Enhancement of CO2 Adsorption and Catalytic Properties by Fe-Doping of [Ga2(OH)2(L)] (H4L = Biphenyl-3,3',5,5'-tetracarboxylic Acid), MFM-300(Ga2)

Metal-organic frameworks (MOFs) are usually synthesized using a single type of metal ion, and MOFs containing mixtures of different metal ions are of great interest and represent a methodology to enhance and tune materials properties. We report the synthesis of [Ga2(OH)2(L)] (H4L = biphenyl-3,3',5,5'-tetracarboxylic acid), designated as MFM-300(Ga2), (MFM = Manchester Framework Material replacing NOTT designation), by solvothermal reaction of Ga(NO3)3 and H4L in a mixture of DMF, THF, and water containing HCl for 3 days. MFM-300(Ga2) crystallizes in the tetragonal space group I4122, a = b = 15.0174(7) Å and c = 11.9111(11) Å and is isostructural with the Al(III) analogue MFM-300(Al2) with pores decorated with -OH groups bridging Ga(III) centers. The isostructural Fe-doped material [Ga(1.87)Fe(0.13)(OH)2(L)], MFM-300(Ga(1.87)Fe(0.13)), can be prepared under similar conditions to MFM-300(Ga2) via reaction of a homogeneous mixture of Fe(NO3)3 and Ga(NO3)3 with biphenyl-3,3',5,5'-tetracarboxylic acid. An Fe(III)-based material [Fe3O(1.5)(OH)(HL)(L)(0.5)(H2O)(3.5)], MFM-310(Fe), was synthesized with Fe(NO3)3 and the same ligand via hydrothermal methods. [MFM-310(Fe)] crystallizes in the orthorhombic space group Pmn21 with a = 10.560(4) Å, b = 19.451(8) Å, and c = 11.773(5) Å and incorporates μ3-oxo-centered trinuclear iron cluster nodes connected by ligands to give a 3D nonporous framework that has a different structure to the MFM-300 series. Thus, Fe-doping can be used to monitor the effects of the heteroatom center within a parent Ga(III) framework without the requirement of synthesizing the isostructural Fe(III) analogue [Fe2(OH)2(L)], MFM-300(Fe2), which we have thus far been unable to prepare. Fe-doping of MFM-300(Ga2) affords positive effects on gas adsorption capacities, particularly for CO2 adsorption, whereby MFM-300(Ga(1.87)Fe(0.13)) shows a 49% enhancement of CO2 adsorption capacity in comparison to the homometallic parent material. We thus report herein the highest CO2 uptake (2.86 mmol g(-1) at 273 K at 1 bar) for a Ga-based MOF. The single-crystal X-ray structures of MFM-300(Ga2)-solv, MFM-300(Ga2), MFM-300(Ga2)·2.35CO2, MFM-300(Ga(1.87)Fe(0.13))-solv, MFM-300(Ga(1.87)Fe(0.13)), and MFM-300(Ga(1.87)Fe(0.13))·2.0CO2 have been determined. Most notably, in situ single-crystal diffraction studies of gas-loaded materials have revealed that Fe-doping has a significant impact on the molecular details for CO2 binding in the pore, with the bridging M-OH hydroxyl groups being preferred binding sites for CO2 within these framework materials. In situ synchrotron IR spectroscopic measurements on CO2 binding with respect to the -OH groups in the pore are consistent with the above structural analyses. In addition, we found that, compared to MFM-300(Ga2), Fe-doped MFM-300(Ga(1.87)Fe(0.13)) shows improved catalytic properties for the ring-opening reaction of styrene oxide, but similar activity for the room-temperature acetylation of benzaldehyde by methanol. The role of Fe-doping in these systems is discussed as a mechanism for enhancing porosity and the structural integrity of the parent material.

Exploiting redox activity in metal–organic frameworks: concepts, trends and perspectives

This feature article highlights latest developments in experimental, theoretical and computational concepts relevant to redox-active metal–organic Frameworks.

The effects of framework dynamics on the behavior of water adsorbed in the [Zn(l-L)(Cl)] and Co-MOF-74 metal–organic frameworks

Density distributions of water molecules in the pores of the [Zn(l-L)(Cl)] metal–organic framework.

I2-induced SC–SC transformation within two-dimensional Zn(ii)-triazole framework: an ideal detector of cyano-containing molecules

A SC–SC transformation process driven by I₂ has been shown to generate a 2D + 1D → 2D interpenetrated architecture from a 2D + 2D → 2D network. For the first time we demonstrate a selective sensor toward cyano-containing molecules.

Controlled synthesis of mixed-valent Fe-containing metal organic frameworks for the degradation of phenol under mild conditions

The amount of Fe²⁺ in the iron-containing MOFs can be controlled by using varied ratios of n(FeCl₃)/n(FeCl₂) in the feed. The morphology of the crystal transforms from a small irregular shape to a large triangular prism.

Nitrous oxide activation by a cobalt(ii) complex for aldehyde oxidation under mild conditions

A new cobalt(ii) complex reacts with N₂O under mild conditions and it catalytically performs the oxidation of aldehydes.

Understanding Small-Molecule Interactions in Metal-Organic Frameworks: Coupling Experiment with Theory

Metal-organic frameworks (MOFs) have gained much attention as next-generation porous media for various applications, especially gas separation/storage, and catalysis. New MOFs are regularly reported; however, to develop better materials in a timely manner for specific applications, the interactions between guest molecules and the internal surface of the framework must first be understood. A combined experimental and theoretical approach is presented, which proves essential for the elucidation of small-molecule interactions in a model MOF system known as M2 (dobdc) (dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate; M = Mg, Mn, Fe, Co, Ni, Cu, or Zn), a material whose adsorption properties can be readily tuned via chemical substitution. It is additionally shown that the study of extensive families like this one can provide a platform to test the efficacy and accuracy of developing computational methodologies in slightly varying chemical environments, a task that is necessary for their evolution into viable, robust tools for screening large numbers of materials.

Covalent organic frameworks comprising cobalt porphyrins for catalytic CO₂ reduction in water

Conversion of carbon dioxide (CO2) to carbon monoxide (CO) and other value-added carbon products is an important challenge for clean energy research. Here we report modular optimization of covalent organic frameworks (COFs), in which the building units are cobalt porphyrin catalysts linked by organic struts through imine bonds, to prepare a catalytic material for aqueous electrochemical reduction of CO2 to CO. The catalysts exhibit high Faradaic efficiency (90%) and turnover numbers (up to 290,000, with initial turnover frequency of 9400 hour(-1)) at pH 7 with an overpotential of -0.55 volts, equivalent to a 26-fold improvement in activity compared with the molecular cobalt complex, with no degradation over 24 hours. X-ray absorption data reveal the influence of the COF environment on the electronic structure of the catalytic cobalt centers.

Toward the synthesis of more reactive S = 2 non-heme oxoiron(IV) complexes

2003 marked a banner year in the bioinorganic chemistry of mononuclear non-heme iron enzymes. The first non-heme oxoiron(IV) intermediate (called J) was trapped and characterized by Bollinger and Krebs in the catalytic cycle of taurine dioxygenase (TauD), and the first crystal structure of a synthetic non-heme oxoiron(IV) complex was reported by Münck, Nam, and Que. These results stimulated inorganic chemists to synthesize related oxoiron(IV) complexes to shed light on the electronic structures and spectroscopic properties of these novel intermediates and gain mechanistic insights into their function in biology. All of the biological oxoiron(IV) intermediates discovered since 2003 have an S = 2 ground spin state, while over 90% of the 60 or so synthetic oxoiron(IV) complexes reported to date have an S = 1 ground spin state. This difference in electronic structure has fueled an interest to more accurately model these enzymatic intermediates and synthesize S = 2 oxoiron(IV) complexes.

This Account follows up on a previous Account (Acc. Chem. Res. 2007, 40, 493) that provided a perspective on the early developments in this field up to 2007 and details our group’s efforts in the development of synthetic strategies to obtain oxoiron(IV) complexes with an S = 2 ground state. Upon inspection of a qualitative d-orbital splitting diagram for a d⁴ metal–oxo center, it becomes evident that the key to achieving an S = 2 ground state is to decrease the energy gap between the d_x²–y² and d_xy orbitals. Described below are two different synthetic strategies we used to accomplish this goal.

The first strategy took advantage of the realization that the d_x²–y² and d_xy orbitals become degenerate in a C₃-symmetric ligand environment. Thus, by employing bulky tripodal ligands, trigonal-bipyramidal S = 2 oxoiron(IV) complexes were obtained. However, substrate access to the oxoiron(IV) center was hindered by the bulky ligands, and the complexes showed limited ability to cleave substrate C–H bonds. The second strategy entailed introducing weaker-field equatorial ligands in six-coordinate oxoiron(IV) complexes to decrease the d_x²–y²/d_xy energy gap to the point where the S = 2 ground state is favored. These pseudo-octahedral S = 2 oxoiron(IV) complexes exhibit high H-atom transfer reactivity relative to their S = 1 counterparts and shed light on the role that the spin state may play in these reactions. Among these complexes is a highly reactive species that to date represents the closest electronic and functional model of the enzymatic intermediate, TauD-J.

Chemical principles underpinning the performance of the metal-organic framework HKUST-1

A common feature of multi-functional metal-organic frameworks is a metal dimer in the form of a paddlewheel, as found in the structure of Cu3(btc)2 (HKUST-1). The HKUST-1 framework demonstrates exceptional gas storage, sensing and separation, catalytic activity and, in recent studies, unprecedented ionic and electrical conductivity. These results are a promising step towards the real-world application of metal-organic materials. In this perspective, we discuss progress in the understanding of the electronic, magnetic and physical properties of HKUST-1, representative of the larger family of Cu···Cu containing metal-organic frameworks. We highlight the chemical interactions that give rise to its favourable properties, and which make this material well suited to a range of technological applications. From this analysis, we postulate key design principles for tailoring novel high-performance hybrid frameworks.

Mechanism of Oxidation of Ethane to Ethanol at Iron(IV)-Oxo Sites in Magnesium-Diluted Fe2(dobdc)

The catalytic properties of the metal-organic framework Fe2(dobdc), containing open Fe(II) sites, include hydroxylation of phenol by pure Fe2(dobdc) and hydroxylation of ethane by its magnesium-diluted analogue, Fe0.1Mg1.9(dobdc). In earlier work, the latter reaction was proposed to occur through a redox mechanism involving the generation of an iron(IV)-oxo species, which is an intermediate that is also observed or postulated (depending on the case) in some heme and nonheme enzymes and their model complexes. In the present work, we present a detailed mechanism by which the catalytic material, Fe0.1Mg1.9(dobdc), activates the strong C-H bonds of ethane. Kohn-Sham density functional and multireference wave function calculations have been performed to characterize the electronic structure of key species. We show that the catalytic nonheme-Fe hydroxylation of the strong C-H bond of ethane proceeds by a quintet single-state σ-attack pathway after the formation of highly reactive iron-oxo intermediate. The mechanistic pathway involves three key transition states, with the highest activation barrier for the transfer of oxygen from N2O to the Fe(II) center. The uncatalyzed reaction, where nitrous oxide directly oxidizes ethane to ethanol is found to have an activation barrier of 280 kJ/mol, in contrast to 82 kJ/mol for the slowest step in the iron(IV)-oxo catalytic mechanism. The energetics of the C-H bond activation steps of ethane and methane are also compared. Dehydrogenation and dissociation pathways that can compete with the formation of ethanol were shown to involve higher barriers than the hydroxylation pathway.

Single-crystal-to-single-crystal metalation of a metal-organic framework: a route toward structurally well-defined catalysts

Metal-organic frameworks featuring ligands with open chelating groups are versatile platforms for the preparation of a diverse set of heterogeneous catalysts through postsynthetic metalation. The crystalline nature of these materials allows them to be characterized via X-ray diffraction, which provides valuable insight into the structure of the metal sites that facilitate catalysis. A highly porous and thermally robust zirconium-based metal-organic framework, Zr6O4(OH)4(bpydc)6 (bpydc(2-) = 2,2'-bipyridne-5,5'-dicarboxylate), bears open bipyridine sites that readily react with a variety of solution- and gas-phase metal sources to form the corresponding metalated frameworks. Remarkably, Zr6O4(OH)4(bpydc)6 undergoes a single-crystal-to-single-crystal transformation upon metalation that involves a change in space group from Fm3̅m to Pa3̅. This structural transformation leads to an ordering of the metalated linkers within the framework, allowing structural characterization of the resulting metal complexes. Furthermore, Zr6O4(OH)4(bpydc)6 yields an active heterogeneous catalyst for arene C-H borylation when metalated with [Ir(COD)2]BF4 (COD = 1,5-cyclooctadiene). These results highlight the unique potential of metal-organic frameworks as a class of heterogeneous catalysts that allow unparalleled structural characterization and control over their active sites.

Modeling TauD-J: a high-spin nonheme oxoiron(IV) complex with high reactivity toward C-H bonds

High-spin oxoiron(IV) species are often implicated in the mechanisms of nonheme iron oxygenases, their C-H bond cleaving properties being attributed to the quintet spin state. However, the few available synthetic S = 2 Fe(IV)═O complexes supported by polydentate ligands do not cleave strong C-H bonds. Herein we report the characterization of a highly reactive S = 2 complex, [Fe(IV)(O)(TQA)(NCMe)](2+) (2) (TQA = tris(2-quinolylmethyl)amine), which oxidizes both C-H and C═C bonds at -40 °C. The oxidation of cyclohexane by 2 occurs at a rate comparable to that of the oxidation of taurine by the TauD-J enzyme intermediate after adjustment for the different temperatures of measurement. Moreover, compared with other S = 2 complexes characterized to date, the spectroscopic properties of 2 most closely resemble those of TauD-J. Together these features make 2 the best electronic and functional model for TauD-J to date.

Structure and catalytic activities of ferrous centers confined on the interface between carbon nanotubes and humic acid

Preparation of heterogeneous catalysts with active ferrous centers is of great significance for industrial and environmental catalytic processes. Nanostructured carbon materials (NCM), which possess free-flowing π electrons, can coordinate with transition metals, provide a confinement environment for catalysis, and act as potential supports or ligands to construct analogous complexes. However, designing such catalysts using NCM is still seldom studied to date. Herein, we synthesized a sandwich structured ternary complex via the coordination of Fe-loaded humic acid (HA) with C=C bonds in the aromatic rings of carbon nanotubes (CNTs), in which the O/N-Fe-C interface configuration provides the confinement environment for the ferrous sites. The experimental and theoretical results revealed octahedrally/tetrahedrally coordinated geometry at Fe centers, and the strong hybridization between CNT C π* and Fe 3d orbitals induces discretization of the atomic charges on aromatic rings of CNTs, which facilitates O2 adsorption and electron transfer from carbon to O2, which enhances O2 activation. The O2 activation by the novel HA/Fe-CNT complex can be applied in the oxidative degradation of phenol red (PR) and bisphenol A (BPA) in aqueous media.

Synthetic chemistry with nitrous oxide

Nitrous oxide (N₂O, ‘laughing gas’) is a very inert molecule. Still, it can be used as a reagent in synthetic organic and inorganic chemistry, serving as O-atom donor, as N-atom donor, or as a oxidant in metal-catalyzed reactions.