Sensor and biosensor preparation, optimisation and applications of Prussian Blue modified electrodes

Recent advances in electrochemical sensing for hydrogen peroxide: a review

Due to the significance of hydrogen peroxide (H(2)O(2)) in biological systems and its practical applications, the development of efficient electrochemical H(2)O(2) sensors holds a special attraction for researchers. Various materials such as Prussian blue (PB), heme proteins, carbon nanotubes (CNTs) and transition metals have been applied to the construction of H(2)O(2) sensors. In this article, the electrocatalytic H(2)O(2) determinations are mainly focused on because they can provide a superior sensing performance over non-electrocatalytic ones. The synergetic effect between nanotechnology and electrochemical H(2)O(2) determination is also highlighted in various aspects. In addition, some recent progress for in vivo H(2)O(2) measurements is also presented. Finally, the future prospects for more efficient H(2)O(2) sensing are discussed.

Real-time monitoring of hydrogen peroxide consumption in an oxidation reaction in molecular solvent and ionic liquids by a hydrogen peroxide electrochemical sensor

An efficient electrochemical protocol to monitor hydrogen peroxide consumption during metal-catalyzed oxidation by using screen-printed electrodes modified with Prussian blue is presented. In particular, cyclooctene oxidation to cyclooctene oxide, catalyzed by a vanadium(V)-salophen complex (H(2)salophen=N,N'-o-phenylenebis(salicylideneimine)), in molecular and ionic media was tested. Initially, a protocol for batch analysis was developed for a monophasic system in acetonitrile, and subsequently, an in situ protocol was developed for a biphasic system of 1-butyl-3-methylimidazolium hexafluorophosphate/phosphate buffer. Calibration curves were performed in amperometric mode by applying -50 mV versus an Ag pseudo-reference. The calibration curve of hydrogen peroxide showed a linear correlation from 1 × 10(-6) up to 5 × 10(-3) mol L(-1) with satisfactory inter- and intra-electrode reproducibility (relative standard deviation (RSD) values of 5 and 13%, respectively, for the monophasic system and 11 and 13%, respectively, for the biphasic system). Kinetic studies to investigate the oxidation reaction for both the mono- and biphasic systems have been carried out in amperometric mode as well. Firstly, the decomposition of hydrogen peroxide was examined, which showed that, in 1-butyl-3-methylimidazolium hexafluorophosphate(,) it completely decomposed in 300 min, whereas in acetonitrile, in the same time frame, 20% of the initial amount was still active. In the presence of 1% of the catalyst the decomposition rate increased in both solvents. Finally, the complete oxidation of cyclooctene was followed and the effective conversion was determined. The developed protocols showed high reproducibility, with the advantage that the environmentally friendly biphasic system could also be recycled. The good analytical performance obtained, coupled with a short analysis time, the possibility of in-line automation and the use of ionic liquids instead of molecular solvents, made this system a very attractive choice for monitoring oxidative reactions.

New Developments in Electrochemical Sensors Based on Poly(3,4-ethylenedioxythiophene)-Modified Electrodes

There is a growing demand for continuous, fast, selective, and sensitive monitoring of key analytes and parameters in the control of diseases and health monitoring, foods quality and safety, and quality of the environment. Sensors based on electrochemical transducers represent very promising tools in this context. Conducting polymers (CPs) have drawn considerable interest in recent years because of their potential applications in different fields such as in sensors, electrochemical displays, and in catalysis. Among the organic conducting polymers, poly(3,4-ethylenedioxythiophene) (PEDOT) and its derivatives have attracted particular interest due to their high stability and high conductivity. This paper summarizes mainly the recent developments in the use of PEDOT-based composite materials in electrochemical sensors.

Electrically Triggered Release of a Small Molecule Drug from a Polyelectrolyte Multilayer Coating

Electrically triggered drug delivery represents an attractive option for actively and remotely controlling the release of a therapeutic from an implantable device (e.g., a "pharmacy-on-a-chip"). Here we report the fabrication of nanoscale thin films that can release precise quantities of a small molecule drug in response to application of a small, anodic electric potential of at least +0.5 V versus Ag/AgCl. Films containing negatively charged Prussian Blue (PB) nanoparticles and positively charged gentamicin, a small hydrophilic antibiotic, were fabricated using layer-by-layer (LbL) assembly. When oxidized, the PB nanoparticles shift from negatively charged to neutral, inducing dissolution of the film. Films with thicknesses in the range 100-500 nm corresponding to drug loadings of 1-4 μg/cm(2) were characterized. We demonstrate control over the drug dosage by tuning the film thickness as well as the magnitude of the applied voltage. Drug release kinetics ranging from triggered burst release to on/off, or pulsatile release, were achieved by applying different electric potential profiles. Finally, the in vitro efficacy of the released drug was confirmed against Staphylococcus aureus bacteria. Given the versatility of an external electrical stimulus and the ability of LbL assembly to conformally coat a variety of substrates regardless of size, shape, or chemical composition, we maintain that electrically controlled release of a drug from an LbL-coated surface could have applications in both implantable medical devices and transdermal drug delivery systems.

The optimization of the electrochemical preparation of Pedot-Prussian blue hybrid electrode material and application in electrochemical sensors

The electrochemical preparation, characterization and analytical applications of a hybrid material consisting of poly(3,4-ethylenedioxythiophene) (PEDOT) conducting polymer and Prussian Blue (PB; iron(III) hexacyanoferrate(II)) are presented. The hybrid material was prepared by a two-steps method. In a first step, the organic conducting polymer coating was deposited onto platinum electrode surface from an aqueous solution containing the monomer and ferricyanide ions. In the second step, the resulted modified electrode Pt|PEDOT- FeCN was immersed in an aqueous solution containing Fe3+ ions and the electrode potential was cycled between 0.6 and –0.4 V. The in situ formation of PB inside the PEDOT matrix has been demonstrated using cyclic voltammetry and electrochemical quartz crystal microbalance. The hybrid material maintains the electrochemical features of each component, i.e. organic and inorganic components. The inorganic component showed electrochemical activity only for the Prussian blue/Everitt’s salt redox system. The hybrid material displayed electrocatalytic activity towards dopamine oxidation in the presence of a large excess of ascorbic acid.

Graphene oxide sheet-prussian blue nanocomposites: green synthesis and their extraordinary electrochemical properties

A facile and green method for the synthesis of graphene oxide sheets (GOs)-prussian blue nanocomposites has been presented via a spontaneous redox reaction in a aqueous solution containing FeCl3, K3[Fe(CN)6] and graphene oxide sheets. Electrochemical property investigation demonstrates PB nanocubes formed on the surface of GOs retain their excellent electrochemical activity and the GOs can enhance the electron transfer between PB and GC electrode. Moreover, the obtained nanocomposites even have shown a higher sensitivity toward the electrocatalytical reduction of H2O2 than that of multiwalled carbon nanotube/PB nanocomposites. Given their extraordinary electrochemical properties and the green preparation, as-prepared GO-PB nanocomposites have great potential in the field of electrochemical sensor and biofuel cell.