Catalytic Transformation of Lignocellulose into Chemicals and Fuel Products in Ionic Liquids

A novel bio-based AB2 monomer for preparing hyperbranched polyamides derived from levulinic acid and furfurylamine

A new AB₂ type bio-based monomer (FDA-E) with two amino functional groups and one ester functional group was prepared from renewable levulinic acid and furfurylamine using a three-step reaction.

Pretreatment of sweet sorghum straw and its enzymatic digestion: insight into the structural changes and visualization of hydrolysis process

BACKGROUND

The efficient utilization of lignocellulosic biomass for biofuel production has received increasing attention. Previous studies have investigated the pretreatment process of biomass, but the detailed enzymatic hydrolysis process of pretreated biomass remains largely unclear. Thus, this study investigated the pretreatment efficiency of dilute alkali, acid, hydrogen peroxide and its ultimate effects on enzymatic hydrolysis. Furthermore, to better understand the enzymatic digestion process of alkali-pretreated sweet sorghum straw (SSS), multimodal microscopy techniques were used to visualize the enzymatic hydrolysis process.

RESULT

After pretreatment with alkali, an enzymatic hydrolysis efficiency of 86.44% was obtained, which increased by 99.54% compared to the untreated straw (43.23%). The FTIR, XRD and SEM characterization revealed a sequence of microstructural changes occurring in plant cell walls after pretreatment, including the destruction of lignin-polysaccharide interactions, the increase of porosity and crystallinity, and reduction of recalcitrance. During the course of hydrolysis, the cellulase dissolved the cell walls in the same manner and the digestion firstly occurred from the middle of cell walls and then toward the cell wall corners. The CLSM coupled with fluorescent labeling demonstrated that the sclerenchyma cells and vascular bundles in natural SSS were highly lignified, which caused the nonproductive bindings of cellulase on lignin. However, the efficient delignification significantly increased the accessibility and digestibility of cellulase to biomass, thereby improving the saccharification efficiency.

CONCLUSION

This work will be helpful in investigating the biomass pretreatment and its structural characterization. In addition, the visualization results of the enzymatic hydrolysis process of pretreated lignocellulose could be used for guidance to explore the lignocellulosic biomass processing and large-scale biofuel production.

Synthesis of renewable acetic acid from CO2and lignin over an ionic liquid-based catalytic system

Renewable acetic acid can be synthesized from CO₂and lignin over an ionic liquid-based catalytic system containing Ru–Rh bimetal catalyst.

Thiamine hydrochloride as a recyclable organocatalyst for the synthesis of bis(indolyl)methanes, tris(indolyl)methanes, 3,3-di(indol-3-yl)indolin-2-ones and biscoumarins

Thiamine hydrochloride was identified as an eco-friendly organocatalyst for the synthesis of a broad range of bis(indolyl)methanes, tris(indolyl)methanes, 3,3-di(indol-3-yl)indolin-2-ones and biscoumarin derivatives in good to excellent yields.

The role of the molecular formula of ZnCl2·nH2O on its catalyst activity: a systematic study of zinc chloride hydrates in the catalytic valorisation of cellulosic biomass

We show the efficient and direct transformation of a range of low value cellulosic substrates such as lignocellulose and algal biomass, into higher value chemicals, including low molecular weight reducing saccharides and furanoid products.

From levulinic acid biorefineries to γ-valerolactone (GVL) using a bi-functional Zr-Al-Beta catalyst

Integrating the production of the green solvent γ-valerolactone (GVL) in the lignocellulosic biorefinery using a bi-functional and multi-substrate Zr-Al-Beta catalyst.

High-purity lignin isolated from poplar wood meal through dissolving treatment with deep eutectic solvents

Deep eutectic solvents (DESs) have potential applications in biomass conversion and green chemicals due to their cost-effectiveness and environmentally friendly properties. This study reports on a feasible method of using DESs for lignin selective extraction from poplar wood meal. DESs obtained from various hydrogen-bond donors and acceptors were used to evaluate the dissolving capacity of lignin from poplar wood meal. Among the various DESs, lactic acid: choline chloride (9 : 1) exhibits the optimal extraction capacity, which is capable of selectively dissolving 95% of lignin from poplar wood meal at 120°C for 6 h. The purity of isolated lignin reaches 98% after regeneration in water. From Fourier Transform-IR, nitrobenzene oxidation and nuclear magnetic resonance analysis, the results demonstrate that the DESs can selectively cleave ether linkages and damage the non-condensation section of lignin, thereby facilitating lignin dissolution from wood meal. Thus, this study provides a promising route for the extraction of high-purity lignin from biomass materials.

Prediction of Thermodynamic Properties of Levulinic Acid via Molecular Simulation Techniques

Second-generation biofuels are a complex mixture of organic compounds that can be further processed to hydrocarbon fuels and other valuable chemicals. One such chemical is levulinic acid (IUPAC name: 4-oxo pentanoic acid), which is a highly versatile ketoacid obtained from cellulose present in agricultural byproducts. For oxygen-containing compounds that decompose at elevated temperatures and pressures, determining the vapor-liquid equilibria data at high temperatures via the experimental route may be challenging. The molecular simulation approach is a cost-effective tool to obtain the necessary data while also allowing us to understand the microscopic origins of macroscopic observable properties. We have employed the transferable potential for phase equilibria-united atom force field to describe the interactions in this system with the parameters for a torsional interaction that are not reported in the literature (levulinic acid is a ketoacid) being determined from density functional theory calculations. We have verified our parameterization via density computations in the isothermal-isobaric ensemble and by comparing our simulation results with the corresponding data from experiments reported in the literature. We have performed grand-canonical transition-matrix Monte Carlo simulations in the temperature range from 580 to 690 K to estimate the vapor-liquid coexistence curves in the temperature-density plane and the Clapeyron plots. From this data, the critical point (T C = 755 K, ρC = 285.4 kg/m3, and P C = 30.57 bar) has been estimated, and this may be used as input to the equations of state employed in process simulation software for design of industrial separation processes including those for "biorefining". As levulinic acid is a "ketoacid", hydrogen bonding occurs, and the liquid phase structure has also been studied using radial distribution functions.

The catalytic behaviour in aqueous-phase hydrogenation over a renewable Ni catalyst derived from a perovskite-type oxide

Water is inevitably associated with the production of bio-derived platform molecules, but most supported metallic catalysts have poor water compatibility. Although there have been a great number of investigations regarding the hydrogenation of bio-derived unsaturated compounds in the organic phase, the reactions that proceed in water are still quite challenging. Herein, we report the synthesis of a supported nickel catalyst (Ni-LN650) by the reduction of the perovskite-type oxide LaNiO₃ precursor at 650 °C. The derived catalyst affords attractive activity in the hydrogenation of furfural by using water as the reaction medium, in which furfural is completely converted into tetrahydrofurfuryl alcohol with the highest productivity of 289.7 mmol g_Ni^-1 h^-1 at 120 °C and 1 MPa of H₂ within 5 h of reaction. The Ni-LN650 catalyst also exhibits good stability and renewability in a cycle test, stemming from the self-regeneration peculiarity of the perovskite-type oxide precursor. Moreover, the catalyst can also demonstrate high activity in the aqueous-phase hydrogenation of various aldehydes, alkenes and carboxylic acids in a series of experiments. Due to the merits of usability in water, the renewability and wide application scope, the Ni-LN650 catalyst can be treated as a promising candidate for the catalytic conversion of bio-derived platform molecules into high value-added fuels and chemicals.

Nanostructured Metal Catalysts for Selective Hydrogenation and Oxidation of Cellulosic Biomass to Chemicals

Conversion of biomass to chemicals provides essential products to human society from renewable resources. In this context, achieving atom-economical and energy-efficient conversion with high selectivity towards target products remains a key challenge. Recent developments in nanostructured catalysts address this challenge reporting remarkable performances in shape and morphology dependent catalysis by metals on nano scale in energy and environmental applications. In this review, most recent advances in synthesis of heterogeneous nanomaterials, surface characterization and catalytic performances for hydrogenation and oxidation for biorenewables with plausible mechanism have been discussed. The perspectives obtained from this review paper will provide insights into rational design of active, selective and stable catalytic materials for sustainable production of value-added chemicals from biomass resources.

Catalytic conversion of duckweed to methyl levulinate in the presence of acidic ionic liquids

In this study, an efficient strategy is proposed for selective methyl levulinate production from duckweed, a typical fast-growing aquatic microalgae in warm and humid regions, in the presence of acidic ionic liquids (ILs). The results show that IL structure has a significant effect on its acidic strength, which finally determines the process efficiency for levulinate methyl generation. With the optimized catalyst of [C₃H₆SO₃HPy]HSO₄, 88.0% duckweed is consumed, resulting in a comparable methyl levulinate yield of 73.7% and a process efficiency of 81.8% at 170 °C for 5 h. Furthermore, this process is substantially influenced by the reaction condition, particularly, it is significantly temperature-dependent. In addition, solvent has a remarkable intensified effect on the process efficiency, which dramatically decreases from 81.8 to 53.7% when methanol is replaced by water.

Intermediate-temperature electrolysis of energy grass Miscanthus sinensis for sustainable hydrogen production

Biohydrogen produced from the electrolysis of biomass is promising because the onset voltages are less than 1.0 V and comparable to those of water and alcohol-water electrolysis. The present study focuses on Miscanthus sinensis as a model grass because of its abundance and ease of cultivation in Japan. The electrochemical performance and hydrogen formation properties of electrolysis cells using grass as a biohydrogen source were evaluated at intermediate temperature to achieve electrolysis. The components, such as holocellulose, cellulose, lignin, and extractives, were separated from Miscanthus sinensis to understand the reactions of Miscanthus sinensis in the electrolysis cell. The relatively high resistivity and low current-voltage performance of an electrolysis cell using lignin were responsible for degradation of the electrolysis properties compared to those with pure cellulose or holocellulose as biohydrogen resources. Biohydrogen was formed according to Faraday’s law and evolved continuously at 0.1 A cm⁻² for 3,000 seconds.

Synergetic Effect of Brønsted/Lewis Acid Sites and Water on the Catalytic Dehydration of Glucose to 5-Hydroxymethylfurfural by Heteropolyacid-Based Ionic Hybrids

The effective dehydration of glucose to 5-hydroxymethylfurfural (HMF) has attracted increasing attention. Herein, a series of sulfonic-acid-functionalized ionic liquid (IL)-heteropolyacid (HPA) hybrid catalysts are proposed for the conversion of glucose to HMF. A maximum total yield of HMF and levoglucosan (LGA; ≈71 %) was achieved in the presence of pyrazine IL-HPA hybrid catalyst [PzS]H2PW in THF/H2O-NaCl (v/v 5:1). The mechanism of glucose dehydration was studied by tailoring the Brønsted/Lewis acid sites of the hybrid catalysts and altering the solvent composition. It was found that water and heteropolyanions have a significant effect on the reaction kinetics. Heteropolyanions are able to stabilize the intermediates and promote the direct dehydration of glucose and intermediate LGA to HMF. A small amount of water could facilitate the conversion of glucose to LGA and suppress the dehydration of LGA to levoglucosenone. In addition, the synergetic effect of Brønsted/Lewis acid sites and a little water was conducive to accelerated proton transfer, which improved the yield of HMF from glucose dehydration.

Transformation of alcohols to esters promoted by hydrogen bonds using oxygen as the oxidant under metal-free conditions

One-pot oxidative transformation of alcohols into esters is very attractive, but metal-based catalysts are used in the reported routes. We discovered that the basic ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM] OAc) could effectively catalyze this kind of reaction using O₂ as an oxidant without any other catalysts or additives. The oxidative self-esterification of benzylic alcohols or aliphatic alcohols and cross-esterification between benzyl alcohols and aliphatic alcohols could all be achieved with high yields. Detailed study revealed that the cation with acidic proton and basic acetate anion could simultaneously form multiple hydrogen bonds with the hydroxyl groups of the alcohols, which catalyzed the reaction very effectively. As far as we know, this is the first work to carry out this kind of reaction under metal-free conditions.

Preparation and Characteristics of Biocomposites Based on Steam Exploded Sisal Fiber Modified with Amphipathic Epoxidized Soybean Oil Resin

Sisal fiber was pretreated by continuous screw extrusion steam explosion to prepare steam exploded sisal fiber (SESF) preforms. An amphipathic bio-based thermosetting resin with poor mechanical properties was cured by epoxidized soybean oil (ESO) and citric acid (CA). The obtained resin was used to modify SESF preforms and prepare eco-friendly biocomposites. The molar ratios (R) of carboxylic groups to epoxy groups and resin contents in biocomposites were adjusted. The biocomposites were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier-transfer infrared spectroscopy (FT-IR), tensile testing, scanning electron microscopy (SEM), water absorption and water contact angle measurements. The maximum thermal decomposition temperature of the biocomposites was 373.1 °C. The curing efficiency of the resin in the biocomposites improved with the increase of resin content, and reached a maximum at R = 1.2. The tensile strength of the biocomposites reached a maximum of 30.4 MPa at R = 1.2 and 40% resin content. SEM images showed excellent interfacial bonding and fracture mechanisms within the biocomposites. The biocomposites exhibited satisfactory water resistance. ESO resin cured with polybasic carboxylic acid is therefore a good bio-based modifier for lignocellulose, that prepare biocomposites with good mechanical properties, hydrophobicity, and thermostability, and which has a potential application in packaging.

Chemocatalytic Conversion of Cellulose into Key Platform Chemicals

Chemocatalytic transformation of lignocellulosic biomass to value-added chemicals has attracted global interest in order to build up sustainable societies. Cellulose, the first most abundant constituent of lignocellulosic biomass, has received extensive attention for its comprehensive utilization of resource, such as its catalytic conversion into high value-added chemicals and fuels (e.g., HMF, DMF, and isosorbide). However, the low reactivity of cellulose has prevented its use in chemical industry due to stable chemical structure and poor solubility in common solvents over the cellulose. Recently, homogeneous or heterogeneous catalysis for the conversion of cellulose has been expected to overcome this issue, because various types of pretreatment and homogeneous or heterogeneous catalysts can be designed and applied in a wide range of reaction conditions. In this review, we show the present situation and perspective of homogeneous or heterogeneous catalysis for the direct conversion of cellulose into useful platform chemicals.

Effects of Sugars, Furans, and their Derivatives on Hydrodeoxygenation of Biorefinery Lignin-Rich Wastes to Hydrocarbons

Hydrodeoxygenation of biorefinery lignin-rich wastes to jet fuel hydrocarbons offers a significant opportunity for enhancing the overall operational efficiency, carbon conversion efficiency, economic viability, and sustainability of biofuels production. However, these wastes usually mainly contain lignin with sugars, furans, and their derivatives as "impurities". Although several factors, including reactant structure, solvents, or the decreased ratio of catalyst to reactant, could be responsible for the jet fuel hydrocarbons yield loss, we found evidence that glucose, xylose, and 5-hydroxymethylfurfural dramatically decreased conversion yields. For example, xylose and glucose lowered the final hydrocarbon yield by 78 and 63 %, respectively. The results revealed that these compounds could suppress metal catalysts and inhibit lignin depolymerization and hydrodeoxygenation (HDO) reactions thus decrease yields of jet fuel range hydrocarbons from biomass-derived lignin. The first-principles calculations and TGA results from spent catalysts validated these findings.

Catalytic Transfer Hydrogenolysis as an Effective Tool for the Reductive Upgrading of Cellulose, Hemicellulose, Lignin, and Their Derived Molecules

Lignocellulosic biomasses have a tremendous potential to cover the future demand of bio-based chemicals and materials, breaking down our historical dependence on petroleum resources. The development of green chemical technologies, together with the appropriate eco-politics, can make a decisive contribution to a cheap and effective conversion of lignocellulosic feedstocks into sustainable and renewable chemical building blocks. In this regard, the use of an indirect H-source for reducing the oxygen content in lignocellulosic biomasses and in their derived platform molecules is receiving increasing attention. In this contribution we highlight recent advances in the transfer hydrogenolysis of cellulose, hemicellulose, lignin, and of their derived model molecules promoted by heterogeneous catalysts for the sustainable production of biofuels and biochemicals.

Alternatives for Chemical and Biochemical Lignin Valorization: Hot Topics from a Bibliometric Analysis of the Research Published During the 2000–2016 Period

A complete bibliometric analysis of the Scopus database was performed to identify the research trends related to lignin valorization from 2000 to 2016. The results from this analysis revealed an exponentially increasing number of publications and a high relevance of interdisciplinary collaboration. The simultaneous valorization of the three main components of lignocellulosic biomass (cellulose, hemicellulose, and lignin) has been revealed as a key aspect and optimal pretreatment is required for the subsequent lignin valorization. Research covers the determination of the lignin structure, isolation, and characterization; depolymerization by thermal and thermochemical methods; chemical, biochemical and biological conversion of depolymerized lignin; and lignin applications. Most methods for lignin depolymerization are focused on the selective cleavage of the β-O-4 linkage. Although many depolymerization methods have been developed, depolymerization with sodium hydroxide is the dominant process at industrial scale. Oxidative conversion of lignin is the most used method for the chemical lignin upgrading. Lignin uses can be classified according to its structure into lignin-derived aromatic compounds, lignin-derived carbon materials and lignin-derived polymeric materials. There are many advances in all approaches, but lignin-derived polymeric materials appear as a promising option.

W(OTf)6 -Catalyzed Synthesis of γ-Lactones by Ring Contraction of Macrolides or Ring Closing of Terminal Hydroxyfatty Acids in Ionic Liquid

γ-Lactones are an important class of fine chemical products and are widely used in perfumes, medicines, pesticides, dyes, and other fields. Herein, a new method for γ-lactones preparation based on ring contraction was developed. Starting from macrolides, W(OTf)₆ was used to catalyze the ring-opening polymerization then depolymerization. The depolymerization step was not a common ring-closing process, and the carbon number of the ring was reduced one by one by rearrangement to form the most thermodynamically stable five-membered ring compounds. γ-Caprolactone (180 °C for 10 h) was obtained in a yield of 94 % when [EMIM]OTf was used as the solvent, and the yield of isolated product was up to 85 %. The interaction of various components and the reaction mechanism were studied by FTIR spectroscopy and ¹ H NMR spectroscopy, respectively. Furthermore, γ-lactones could be produced when the substrate was extended to terminal hydroxyfatty acids. Unexpectedly, the catalyst was poisoned by 1 equivalent of H₂ O added during the process and thus the yield decreased greatly. The reaction is green and simple, and proceeds in one pot with high atom economy (100 % for macrolides and with water as the only byproduct for terminal hydroxyfatty acid), which provides a promising approach to synthesizing γ-lactones.

Catalytic Transformation of Cellulose and Its Derivatives into Functionalized Organic Acids

Cellulose is a promising renewable and abundant resource for the production of high-value chemicals, in particular, organic oxygenates, because of its high oxygen/carbon ratio. The sustainable production of hydroxycarboxylic acids and dicarboxylic acids, such as gluconic/glucaric acid, lactic acid, 2,5-furandicarboxylic acid, adipic acid, and terephthalic acid, most of which are monomers of key polymers, have attracted much attention in recent years. The synthesis of these organic acids from cellulose generally involves several tandem reaction steps, and thus, multifunctional catalysts that can catalyze the selective activation of specific C-O or C-C bonds hold the key. This review highlights recent advances in the development of efficient catalytic systems and new strategies for the selective conversion of cellulose or its derived carbohydrates into functionalized organic acids. The reaction mechanism is discussed to offer deep insights into the regioselective cleavage of C-O or C-C bonds.

Bioconversion of Lignocellulosic Biomass to Fermentable Sugars by Immobilized Magnetic Cellulolytic Enzyme Cocktails

Enzyme cocktails of reusable, highly stable cellulolytic enzymes play an inevitable role in bioconversion of biomass to biofuels economically. Cellulase, xylanase and β-1,3-glucanase bound silica-amine functionalized iron oxide magnetic nanoparticles (ISN-CLEAs) were prepared and used as the biocatalyst for the depolymerization of cellulosic biomass into monomeric sugar in the present study. The Fe₃O₄-NPs and Fe₃O₄@SiO₂-NH₂-NPs and ISN-CLEAs had an average hydrodynamic size of 82.2, 86.4, and 976.9 nm, respectively, which was confirmed by dynamic light scattering (DLS). About 97% of protein binding was achieved with 135 mM glutaraldehyde at 10 h of cross-linking time and successful binding was confirmed by Fourier transform infrared spectroscopy (FTIR). The ISN-CLEAs exhibited the highest thermal stability of 95% at 50 °C for 2 h and retained extended storage stability of 97% compared to 60% of its free counterpart. Besides, cross-linking allowed ISN-CLEAs reuse for at least eight consecutive cycles retaining over 70% of its initial activity. ISN-CLEAs exhibited approximately 15% increase in carbohydrate digestibility on sugar cane bagasse and eucalyptus pulp than the free enzyme.

Ionic liquids: a brief history

There is no doubt that ionic liquids have become a major subject of study for modern chemistry. We have become used to ever more publications in the field each year, although there is some evidence that this is beginning to plateau at approximately 3500 papers each year. They have been the subject of several major reviews and books, dealing with different applications and aspects of their behaviours. In this article, I will show a little of how interest in ionic liquids grew and developed.

Porous Liquid: A Stable ZIF-8 Colloid in Ionic Liquid with Permanent Porosity

We reported an example of metal-organic framework (MOF)-based porous liquid by dispersing ZIF-8 ({Zn(mim)₂}, mim = 2-methylimidazole) nanocrystallites in ionic liquid (IL) of [Bpy][NTf₂] ( N-butyl pyridinium bis(trifluoromethyl sulfonyl)imide). Two essential challenges, stable colloid formation and porosity retention, have been overcome to prepare MOF-based porous liquid. Preventing ZIF-8 nanocrystals from aggregation before dispersing is vital to form a stable ZIF-8 colloid in IL via enhancing the interaction between ZIF-8 and IL. The resultant ZIF-8-[Bpy][NTf₂] colloid is able to be stable over months without precipitating. [Bpy][NTf₂] with larger ion sizes cannot occupy pores in ZIF-8, leaving the ZIF-8 cage empty for enabling access by guest molecules. The porosity of this porous liquid system was verified by positron (e⁺) annihilation lifetime spectroscopy and I₂ adsorption in ZIF-8 in the colloid. MOF-based porous liquids could provide a new material platform for liquid-bed-based gas separations.

Versatile design and synthesis of mesoporous sulfonic acid catalysts

Mesoporous sulfonic acid catalysts (MSAC) are widely used in acid-catalyzed reactions, including biomass conversions with plenty of polar solvents and precursors. The catalytic efficiency of MSAC is greatly affected by the microenvironment around the sulfonic acid sites. In this review, the progress on modification of microenvironment of MSAC is reviewed over the past decade. Hydrophobic modification allows MSAC prevent the adhesion of water molecules onto sulfonic acid sites, to abate the risk of reduced acid strength and catalytic efficiency. In comparison, hydrophilic properties can bring positive effect on acid-catalyzed reactions with the aid of hydrophilic interaction between polar functional groups on MSAC and hydrophilic groups of specific substrates. Amphiphilic MSAC with tunable wettability for specific substrates and solvents tend to improve the efficiency in certain reactions with mixed solvents or reactants of different polarity, especially for biphasic systems of immiscible liquids. Furthermore, much attention has been attracted on modification of surface to simulate the microenvironment of homogeneous solvents and enzyme biocatalysts in recent research. New trends of this field are also highlighted.

Acid-Catalyzed Conversion of Carbohydrates into Value-Added Small Molecules in Aqueous Media and Ionic Liquids

Biomass is the only realistic major alternative source (to crude oil) of hydrocarbon substrates for the commercial synthesis of bulk and fine chemicals. Within biomass, terrestrial sources are the most accessible, and therein lignocellulosic materials are most abundant. Although lignin shows promise for the delivery of certain types of organic molecules, cellulose is a biopolymer with significant potential for conversion into high-volume and high-value chemicals. This review covers the acid-catalyzed conversion of lower value (poly)carbohydrates into valorized organic building-block chemicals (platform molecules). It focuses on those conversions performed in aqueous media or ionic liquids to provide the reader with a perspective on what can be considered a best case scenario, that is, that the overall process is as sustainable as possible.

Encapsulation of ultrafine metal-oxide nanoparticles within mesopores for biomass-derived catalytic applications

The development of efficient encapsulation strategies has attracted intense interest for preparing highly active and stable heterogeneous metal catalysts. However, issues related to low loadings, costly precursors and complex synthesis processes restrict their potential applications. Herein, we report a novel and general strategy to encapsulate various ultrafine metal-oxides nanoparticles (NPs) into the mesoporous KIT-6. The synthesis is facile, which only involves self-assembly of a metal-organic framework (MOF) precursor in the silica mesopores and a subsequent calcination process to transform the MOF into metal-oxide NPs. After the controlled calcination, the metal-oxide NPs produced from MOF decomposition are exclusively confined and uniformly distributed in the mesopores of KIT-6 with high metal loadings. Benefitting from the encapsulation effects, as-synthesized Co@KIT-6 materials exhibit superior catalytic activity and recycling stability in biomass-derived HMF oxidation under mild reaction conditions.

X-ray-Induced Fragmentation of Imidazolium-Based Ionic Liquids Studied by Soft X-ray Absorption Spectroscopy

We investigated the X-ray absorption spectroscopy (XAS) fingerprint of EMImTFSI ionic liquid (IL) and its fragmentation products created by X-ray irradiation. To accomplish this, we used an open geometry where an IL droplet is directly exposed in the vacuum chamber and an enclosed geometry where the IL is confined in a cell covered by an X-ray transparent membrane. In the open geometry, the XAS signature was stable and consistent with experimental and theoretical spectra reported in the literature. In contrast, when the IL is enclosed, its XAS evolves continuously under X-ray illumination due to the accumulation of volatile fragmentation products inside the closed cell, while they evaporate in the open geometry. The changes in the XAS from the core levels of relevant elements (C, N, S, F) together with density functional theory calculations allowed us to identify the chemical nature of the fragment products and the chemical bonds most vulnerable to rupture under soft X-ray irradiation.

"Solvent-in-salt" systems for design of new materials in chemistry, biology and energy research

Inorganic and organic "solvent-in-salt" (SIS) systems have been known for decades but have attracted significant attention only recently. Molten salt hydrates/solvates have been successfully employed as non-flammable, benign electrolytes in rechargeable lithium-ion batteries leading to a revolution in battery development and design. SIS with organic components (for example, ionic liquids containing small amounts of water) demonstrate remarkable thermal stability and tunability, and present a class of admittedly safer electrolytes, in comparison with traditional organic solvents. Water molecules tend to form nano- and microstructures (droplets and channel networks) in ionic media impacting their heterogeneity. Such microscale domains can be employed as microreactors for chemical and enzymatic synthesis. In this review, we address known SIS systems and discuss their composition, structure, properties and dynamics. Special attention is paid to the current and potential applications of inorganic and organic SIS systems in energy research, chemistry and biochemistry. A separate section of this review is dedicated to experimental methods of SIS investigation, which is crucial for the development of this field.