A validated 1H NMR method for the determination of the degree of deacetylation of chitosan

Tailorable thiolated trimethyl chitosans for covalently stabilized nanoparticles

A novel four-step method is presented to synthesize partially thiolated trimethylated chitosan (TMC) with a tailorable degree of quaternization and thiolation. First, chitosan was partially N-carboxylated with glyoxylic acid and sodium borohydride. Next, the remaining amines were quantitatively dimethylated with formaldehyde and sodium borohydride and then quaternized with iodomethane in NMP. Subsequently, these partially carboxylated TMCs dissolved in water were reacted with cystamine at pH 5.5 using EDC as coupling agent. After addition of DTT and dialysis, thiolated TMCs were obtained, varying in degree of quaternization (25-54%) and degree of thiolation (5-7%), as determined with (1)H NMR and Ellman's assay. Gel permeation chromatography with light scattering detection indicated limited intermolecular cross-linking. All thiolated TMCs showed rapid oxidation to yield disulfide cross-linked TMC at pH 7.4, while the thiolated polymers were rather stable at pH 4.0. When Calu-3 cells were used, XTT and LDH cell viability tests showed a slight reduction in cytotoxicity for thiolated TMCs as compared to the nonthiolated polymers with similar DQs. Positively charged nanoparticles loaded with fluorescently labeled ovalbumin were made from thiolated TMCs and thiolated hyaluronic acid. The stability of these particles was confirmed in 0.8 M NaCl, in contrast to particles made from nonthiolated polymers that dissociated under these conditions, demonstrating that the particles were held together by intermolecular disulfide bonds.

Genetic improvement of Bacillus licheniformis strains for efficient deproteinization of shrimp shells and production of high-molecular-mass chitin and chitosan

By targeted deletion of the polyglutamate operon (pga) in Bacillus licheniformis F11, a derivative form, F11.1 (Δpga), was obtained that, along with lacking polyglutamate (PGA) formation, displayed enhanced proteolytic activities. The phenotypic properties were maintained in a strain in which the chiBA operon was additionally deleted: F11.4 (ΔchiBA Δpga). These genetically modified strains, carrying the Δpga deletion either alone (F11.1) or together with the ΔchiBA (F11.4) deletion, were used in fermentations (20-liter scale) aiming at the deproteinization of shrimp shells in order to obtain long-chain chitin. After chemical deacetylation, the resulting chitosan samples were analyzed by nuclear magnetic resonance spectroscopy, size exclusion chromatography, and viscometry and compared to a chitosan preparation that was produced in parallel by chemical methods by a commercial chitosan supplier (GSRmbH). Though faint lipid impurities were present in the fermented polysaccharides, the viscosity of the material produced with the double-deletion mutant F11.4 (Δpga ΔchiBA) was higher than that of the chemically produced and commercially available samples (Cognis GmbH). Thus, enhanced proteolytic activities and a lack of chitinase activity render the double mutant F11.4 a powerful tool for the production of long-chain chitosan.

Crosslink effect and albumin adsorption onto chitosan/alginate multilayered systems: an in situ QCM-D study

The adsorption of HSA onto CHI/ALG multilayer assemblies was assessed in situ using QCM-D. It was found that the behavior of HSA on biomaterials surface can be tuned by adjusting parameters of the polyelectrolyte system such as pH, layer number, crosslinker and polymer terminal layer. Our results confirmed the key role of electrostatic interactions during HSA adsorption, since oppositely charged surfaces were more effective in promoting protein adhesion. QCM-D data revealed that crosslinking (CHI/ALG)(5) CHI films allows HSA to become adsorbed in physiological conditions. Our results suggested that the biological potential of biopolymers and the mild conditions of the LbL technique turn these natural nanoassemblies into a suitable choice to be used as pH-sensitive coatings.

Injectable rhBMP-2-loaded chitosan hydrogel composite: osteoinduction at ectopic site and in segmental long bone defect

Carriers for bone morphogenetic protein-2 (BMP-2) used in clinical practice still suffer from limitations such as insufficient protein retention. In addition, there is a clinical need for injectable carriers. The main objective of this study was to assess bone forming ability of rhBMP-2 combined either with chitosan hydrogel (rhBMP-2/CH) or chitosan hydrogel containing β-tricalcium phosphate (β-TCP) (rhBMP-2/CH/TCP). Formulations were first compared in a rat ectopic intramuscular bone formation model, and the optimal formulation was further evaluated in healing of 15-mm critical size defect in the radius of a rabbit. Three weeks after injection ectopically formed bone was analyzed by microcomputerized tomography (micro-CT) and histology. Significantly higher (4.7-fold) mineralized bone formation was observed in the rhBMP-2/CH/TCP group compared to rhBMP-2/CH group. In a pilot study, defect in a rabbit radius treated with rhBMP-2/CH/TCP showed incomplete regeneration at 8 weeks with composite leakage from the defect, indicating the need for formulation refinement when segmental defect repair is foreseen.

Single molecule atomic force microscopy and force spectroscopy of chitosan

Atomic force microscopy (AFM) and AFM-based force spectroscopy was used to study the desorption of individual chitosan polymer chains from substrates with varying chemical composition. AFM images of chitosan adsorbed onto a flat mica substrate show elongated single strands or aggregated bundles. The aggregated state of the polymer is consistent with the high level of flexibility and mobility expected for a highly positively charged polymer strand. Conversely, the visualization of elongated strands indicated the presence of stabilizing interactions with the substrate. Surfaces with varying chemical composition (glass, self-assembled monolayer of mercaptoundecanoic acid/decanethiol and polytetrafluoroethylene (PTFE)) were probed with chitosan modified AFM tips and the corresponding desorption energies, calculated from plateau-like features, were attributed to the desorption of individual polymer strands. Desorption energies of 2.0±0.3×10(-20)J, 1.8±0.3×10(-20)J and 3.5±0.3×10(-20)J were obtained for glass, SAM of mercaptoundecanoic/dodecanethiol and PTFE, respectively. These single molecule level results can be used as a basis for investigating chitosan and chitosan-based materials for biomaterial applications.

Intracellular trafficking and decondensation kinetics of chitosan-pDNA polyplexes

The transfection efficiency (TE) of chitosan-plasmid DNA (pDNA) polyplexes can be critically modulated by the polymer degree of deacetylation (DDA) and molecular weight (MW). This study was performed to test the hypothesis that the TE dependence on chitosan MW and DDA is related to the polyplex stability, hence their intracellular decondensation/unpacking kinetics. Major barriers to nonviral gene transfer were studied by image-based quantification. Although uptake increased with increased DDA, it did not appear to be a structure-dependent process affecting TE, nor was nuclear entry. Colocalization analysis showed that all chitosans trafficked through lysosomes with similar kinetics. Fluorescent resonant energy transfer (FRET) analysis revealed a distinct relationship between TE and polyplex dissociation rate. The most efficient chitosans showed an intermediate stability and a kinetics of dissociation, which occurred in synchrony with lysosomal escape. In contrast, a rapid dissociation before lysosomal escape was found for the inefficient low DDA chitosan whereas the highly stable and inefficient complex formed by a high MW and high DDA chitosan did not dissociate even after 24 hours. This study identified that the kinetics of decondensation in relation to lysosomal escape was a most critical structure-dependent process affecting the TE of chitosan polyplexes.

In vitro permeability enhancement in intestinal epithelial cells (Caco-2) monolayer of water soluble quaternary ammonium chitosan derivatives

The aim of this study was to investigate the effects of a type of hydrophobic moiety, extent of N-substitution (ES), and degree of quaternization (DQ) of chitosan (CS) on the transepithelial electrical resistance and permeability of Caco-2 cells monolayer, using fluorescein isothiocyanate dextran 4,400 (FD-4) as the model compound for paracellular tight junction transport. CS was substituted with hydrophobic moiety, an aliphatic aldehyde (n-octyl) or aromatic aldehyde (benzyl), for the improved hydrophobic interaction with cell membrane, and they were quaternized with Quat-188 to render CS soluble. The factors affecting the epithelial permeability have been evaluated in the intestinal cell monolayers, Caco-2 cells. Cytotoxicity was evaluated by using the trypan blue and MTT viability assay. The results revealed that at pH 7.4 CSQ appeared to increase cell permeability in dose-dependent manner, and this effect was relatively reversible at the lower doses of 0.05-1.25 mM. The higher DQ and ES caused the higher permeability of FD-4. Cytotoxicity of CSQ was concentration, %DQ, and %ES dependent. Substitution with hydrophobic moiety caused decreasing in permeability of FD-4 and cytotoxicity by benzyl group had more effect than octyl group. These studies demonstrated that these novel modified chitosan derivatives had potential for using as absorption enhancers.

Application of spectroscopic methods for structural analysis of chitin and chitosan

Chitin, the second most important natural polymer in the world, and its N-deacetylated derivative chitosan, have been identified as versatile biopolymers for a broad range of applications in medicine, agriculture and the food industry. Two of the main reasons for this are firstly the unique chemical, physicochemical and biological properties of chitin and chitosan, and secondly the unlimited supply of raw materials for their production. These polymers exhibit widely differing physicochemical properties depending on the chitin source and the conditions of chitosan production. The presence of reactive functional groups as well as the polysaccharide nature of these biopolymers enables them to undergo diverse chemical modifications. A complete chemical and physicochemical characterization of chitin, chitosan and their derivatives is not possible without using spectroscopic techniques. This review focuses on the application of spectroscopic methods for the structural analysis of these compounds.

An efficient method for 15N-labeling of chitin in fungi

To permit facile (15)N solid-state NMR (ssNMR) analysis of the degree of acetylation (DA) of chitinous materials in fungi a method for the introduction of a (15)N isotopic label has been developed. Using Penicillium chrysogenum as a model system, a series of (15)N-based media were surveyed for their abilities to support mycelial growth, and a rich medium supplemented with ((15)NH(4))(2)SO(4) supported good growth. Uptake of label into chitin extracted from mycelia grown in the rich ((15)NH(4))(2)SO(4)-based media was monitored by mass spectrometry, with approximately 1 g/L of ((15)NH(4))(2)SO(4) leading to approximately 65% incorporation. The labeled chitin was studied by ssNMR to determine its DA, and the (15)N label permitted measurement of DA to within 0.5% with acquisition times of on the order of half an hour. Similar studies validated the method for DA measurements on chitin from cultures of Aspergillus niger and Mucor rouxii.

Development of a new chitosan hydrogel for wound dressing

Wound healing is a complex process involving an integrated response by many different cell types and growth factors in order to achieve rapid restoration of skin architecture and function. The present study evaluated the applicability of a chitosan hydrogel (CH) as a wound dressing. Scanning electron microscopy analysis was used to characterize CH morphology. Fibroblast cells isolated from rat skin were used to assess the cytotoxicity of the hydrogel. CH was able to promote cell adhesion and proliferation. Cell viability studies showed that the hydrogel and its degradation by-products are noncytotoxic. The evaluation of the applicability of CH in the treatment of dermal burns in Wistar rats was performed by induction of full-thickness transcutaneous dermal wounds. Wound healing was monitored through macroscopic and histological analysis. From macroscopic analysis, the wound beds of the animals treated with CH were considerably smaller than those of the controls. Histological analysis revealed lack of a reactive or a granulomatous inflammatory reaction in skin lesions with CH and the absence of pathological abnormalities in the organs obtained by necropsy, which supported the local and systemic histocompatibility of the biomaterial. The present results suggest that this biomaterial may aid the re-establishment of skin architecture.

Influence of the degree of acetylation on the enzymatic degradation and in vitro biological properties of trimethylated chitosans

Chitosan derivatives such as N,N,N-trimethylated chitosan (TMC) are currently being investigated for the delivery of drugs, vaccines and genes. However, the influence of the extent of N-acetylation of these polymers on their enzymatic degradability and biological properties is unknown. In this study, TMCs with a degree of acetylation (DA) ranging from 11 to 55% were synthesized by using a three-step method. First, chitosan was partially re-acetylated using acetic anhydride followed by quantitative dimethylation using formaldehyde and sodium borohydrate. Then, in presence of an excess amount of iodomethane, TMC was synthesized. The TMCs obtained by this method showed neither detectable O-methylation nor loss in acetyl groups ((1)H NMR) and a slight increase in molecular weight (GPC) with increasing degree of substitution, implying that no chain scission occurred during synthesis. The extent of lysozyme-catalyzed degradation of TMC, and that of its precursors chitosan and dimethyl chitosan, was highly dependent on the DA and polymers with the highest DA showed the largest decrease in molecular weight. On Caco-2 cells, TMCs with a high DA ( approximately 50%), a DQ of around 44% and with or without O-methylated groups, were not able to open tight junctions in the trans-epithelial electrical resistance (TEER) assay, in contrast with TMCs (both O-methylated and O-methyl free; concentration 2.5mg/ml) with a similar DQ but a lower DA which were able to reduce the TEER with 30 and 70%, respectively. Additionally, TMCs with a high DA ( approximately 50%) demonstrated no cell toxicity (MTT, LDH release) up to a concentration of 10mg/ml.

Microencapsulation by spray coagulation of diltiazem HCl in calcium alginate-coated chitosan

The aim of this work was to develop a procedure for encapsulation of diltiazem HCl by spray coagulation. Factors affecting the formulations such as the effect of NaCl on the solubility of diltiazem in alginate solution, surface tension, pH, viscosity of the coagulation medium, and the effect of drug load on drug release were studied. The drug load was increased substantially from 10 up to 320 mg/mL by adding 1.2% w/v NaCl in 1% w/v alginate solution. More stable microcapsules were obtained at pH 4.6 (acetate buffer) than at a pH 2.8 (lactic acid), and the microencapsulation process was favored by the type of chitosan that produced low turbidity and viscosity in the coagulation medium. A dose of 50 mg/mL of diltiazem HCl, 1.2% w/v NaCl, and chitosan CS allowed higher amount of drug to be encapsulated. The high water solubility of diltiazem HCl leads to fast release from the microcapsules.

Encapsulation of vitamin C in tripolyphosphate cross-linked chitosan microspheres by spray drying

This paper describes vitamin C-encapsulated chitosan microspheres cross-linked with tripolyphosphate (TPP) using a new process prepared by spray drying intended for oral delivery of vitamin C. Thus, prepared microspheres were evaluated by loading efficiency, particles size analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), zeta potential and in vitro release studies. The microspheres so prepared had a good sphericity and shape but varied with the volume of cross-linking agent solution added. They were positively charged. The mean particle size ranged from 6.1-9.0 microm. The size, shape, encapsulation efficiency, zeta potential and release rate were influenced by the volume of cross-linking agent. With the increasing amount of cross-linking agent, both the particle size and release rate were increased. Encapsulation efficiency decreased from 45.05-58.30% with the increasing amount of TPP solution from 10-30 ml. FTIR spectroscopy study showed that the vitamin C was found to be stable after encapsulation. XRD studies revealed that vitamin C is dispersed at the molecular level in the TPP-chitosan matrix. Well-defined change in the surface morphology was observed with the varying volume of TPP. The sphericity of chitosan microspheres was lost at higher volume of cross-linking agent. The release of vitamin C from these microspheres was sustained and affected by the volume of cross-linking agent added. The release of vitamin C from TPP-chitosan microspheres followed Fick's law of diffusion.

Preparation of cross-linked chitosan microspheres by spray drying: Effect of cross-linking agent on the properties of spray dried microspheres

Chitosan microspheres cross-linked with three different cross-linking agents viz, tripolyphosphate (TPP), formaldehyde (FA) and gluteraldehyde (GA) have been prepared by spray drying technique. The influence of these cross-linking agents on the properties of spray dried chitosan microspheres was extensively investigated. The particle size and encapsulation efficiencies of thus prepared chitosan microspheres ranged mainly between 4.1-4.7 microm and 95.12-99.17%, respectively. Surface morphology, % erosion, % water uptake and drug release properties of the spray dried chitosan microspheres was remarkably influenced by the type (chemical or ionic) and extent (1 or 2% w/w) of cross-linking agents. Spray dried chitosan microspheres cross-linked with TPP exhibited higher swelling capacity, % water uptake, % erosion and drug release rate at both the cross-linking extent (1 and 2% w/w) when compared to those cross-linked with FA and GA. The sphericity and surface smoothness of the spray dried chitosan microspheres was lost when the cross-linking extent was increased from 1 to 2% w/w. Release rate of the drug from spray dried chitosan microspheres decreased when the cross-linking extent was increased from 1 to 2% w/w. The physical state of the drug in chitosan-TPP, chitosan-FA and chitosan-GA matrices was confirmed by the X-ray diffraction (XRD) study and found that the drug remains in a crystalline state even after its encapsulation. Release of the drug from chitosan-TPP, chitosan-FA and chitosan-GA matrices followed Fick's law of diffusion.