Colloidal gold and silver triangular nanoprisms

One-pot synthesis of spheres-on-sphere silica particles from a single precursor for fast HPLC with low back pressure

Spheres-on-sphere (SOS) silica particles are prepared in a one-pot scalable synthesis from mercaptopropyltrimethoxysilane with hydrophilic polymer and cationic surfactant under alkaline conditions. The SOS particles exhibit solid-core porous-shell properties. The fast separation of small molecules and proteins with low back pressure are demonstrated by high-performance liquid chromatography (HPLC) for the columns packed with SOS-particles.

Electron accumulation on metal nanoparticles in plasmon-enhanced organic solar cells

Plasmonic metal nanoparticles have been used to enhance the performance of thin-film devices such as organic photovoltaics based on polymer/fullerene blends. We show that silver nanoprisms accumulate long-lived negative charges when they are in contact with a photoexcited bulk heterojunction blend composed of poly(3-hexylthiophene)/phenyl-C61-butyric acid methyl ester (P3HT/PCBM). We report both the charge modulation and electroabsorption spectra of silver nanoprisms in solid-state devices and compare these spectra with the photoinduced absorption spectra of P3HT/PCBM blends containing silver nanoprisms. We assign a previously unidentified peak in the photoinduced absorption spectra to the presence of photoinduced electrons on the silver nanoprisms. We show that coating the nanoprisms with a 2.5 nm thick insulating layer can completely inhibit this charging. These results may inform methods for limiting metal-mediated losses in plasmonic solar cells.

Beneficial effects of microwave-assisted heating versus conventional heating in noble metal nanoparticle synthesis

An extensive comparative study of the effects of microwave versus conventional heating on the nucleation and growth of near-monodisperse Rh, Pd, and Pt nanoparticles has revealed distinct and preferential effects of the microwave heating method. A one-pot synthetic method has been investigated, which combines nucleation and growth in a single reaction via precise control over the precursor addition rate. Using this method, microwave-assisted heating enables the convenient preparation of polymer-capped nanoparticles with improved monodispersity, morphological control, and higher crystallinity, compared with samples heated conventionally under otherwise identical conditions. Extensive studies of Rh nanoparticle formation reveal fundamental differences during the nucleation phase that is directly dependent on the heating method; microwave irradiation was found to provide more uniform seeds for the subsequent growth of larger nanostructures of desired size and surface structure. Nanoparticle growth kinetics are also markedly different under microwave heating. While conventional heating generally yields particles with mixed morphologies, microwave synthesis consistently provides a majority of tetrahedral particles at intermediate sizes (5-7 nm) or larger cubes (8+ nm) upon further growth. High-resolution transmission electron microscopy indicates that Rh seeds and larger nanoparticles obtained from microwave-assisted synthesis are more highly crystalline and faceted versus their conventionally prepared counterparts. Microwave-prepared Rh nanoparticles also show approximately twice the catalytic activity of similar-sized conventionally prepared particles, as demonstrated in the vapor-phase hydrogenation of cyclohexene. Ligand exchange reactions to replace polymer capping agents with molecular stabilizing agents are also easily facilitated under microwave heating, due to the excitation of polar organic moieties; the ligand exchange proceeds with excellent retention of nanoparticle size and structure.

Multifaceted prismatic silver nanoparticles: synthesis by chloride-directed selective growth from thiolate-protected clusters and SERS properties

We describe the synthetic preparation of well-defined symmetric multifaceted prismatic silver nanoparticles with chemically controlled faceting advantageous for strong and tunable surface-enhanced Raman scattering, SERS. These silver nanoparticles, that have been termed nanoflowers, AgNFls for their characteristic morphologies, have been prepared by a one-pot aqueous reaction under ambient conditions. AgNFl faceting is synthetically controlled by selective nanoparticle growth driven by chloride ions. Selective chloride binding to the surface of growing AgNFls results in nanoparticle enlargement predominantly at the points of their highest energy. These growth points are located at the tips of prismatic polygons in precursor prismatic morphologies that have been produced from thiolate-protected silver clusters whose coalescence is triggered with a strong base. For the practical aspects of AgNFl synthesis, concentrations of thiol and a strong base were found to be the key variables reliably controlling the extent of AgNFl faceting, as well as the kinetics of AgNFl formation and their stability. The selective growth of AgNFls progresses slower compared to that of non-faceted prisms: fewer nuclei can form leading to larger AgNFls with the diameter ranging from 130 to 2250 nm and asperity sizes on the order of 20 to 100 nm. Self-assembly of AgNFls yields columnar stacking. AgNFls were demonstrated to function as a promising substrate for surface-enhanced Raman scattering. SERS measurements were performed for a series of AgNFls with variable faceting, where the enhancement factors of 4.6 × 10(8) and 425 have been achieved for dry solid films and aqueous dispersions of non-aggregated AgNFls with single-particle enhancement, respectively. These SERS results are promising, especially in combination with that AgNFl nanoscale asperities can be conveniently tailored synthetically. Overall, AgNFls offer valuable opportunities for a system with synthetically variable nanoscale asperities.

Fabrication of Au@Ag core-shell nanoparticles using polyelectrolyte multilayers as nanoreactors

A new synthetic strategy has been developed for the fabrication of Au-Ag bimetallic core-shell nanoparticles (NPs) using polyelectrolyte multilayers (PEMs) as unique nanoreactors. Bimetallic NPs composed of Au core and Ag shell were successively incorporated into PEMs by repeating anion/cation exchange/reduction cycle multiple times in a stepwise manner. The strategy described here allows for the facile preparation of Au@Ag core-shell NPs with well-controlled core and shell dimensions and geometrically tunable optical properties by simply varying the number of ion-exchange/reduction cycles in the PEM matrix. The strategy can be extended to synthesize in situ other core-shell NPs in polymer matrix.

Shape-controlled synthesis of silver nanocrystals by X-ray irradiation for inkjet printing

A suite of silver (Ag) nanocrystals have been synthesized using a rapid water radiolysis approach via X-ray irradiation. Various shapes including spheroidal, prism, rod, and multifaceted nanoparticles can be produced by varying the initial concentration of polyvinylpyrrolidone (PVP) relative to silver nitrate (AgNO₃). UV-visible spectroscopy and transmission electron microscopy (TEM) coupled with selected area electron diffraction (SAED) have been used to characterize these Ag products. At an optimized reagent ratio, a mixture of high-aspect-ratio rods (tunable to ∼50) and spheroidal particles result. Such a mixture is proven to have highly beneficial melting point and dispersive properties suited to inkjet printing of conductive Ag lines. The resistivity of the printed lines decreases to 77.7 μΩ and 33.1 μΩ after heating to 200 and 350 °C.

Controlling the morphology of gold nanoparticles synthesized photochemically in a polymer matrix through photonic parameters

A facile method for the preparation of gold nanoparticles (AuNPs) with various morphologies, including triangles, cubes and nanospheres into a urethane methacrylate polymer matrix, has been developed. The hybrid nanocomposites have been obtained by photoreduction of a gold precursor in the presence of a 30 wt% urethane methacrylate containing quaternary ammonium structure and 70 wt% functional monomer, carboxyl oligo-urethane dimethacrylate. The final materials contain gold nanoparticles with a morphology dependant on the reaction conditions. The influence of photonic and chemical parameters on the shape of the nanoparticles has been examined. Specific interactions between the macromolecular network and the nascent particles play an important role insofar as they control the access of metal atoms to the different crystalline planes of the growing nanoparticles, which is necessary to obtain anisotropic objects. A common mechanism for the formation of the various types of AuNPs is proposed. Coupling the intrinsic characteristics of metal nanoparticles with those of the copolymer substrate could result in materials with innovative properties.

Highly ordered arrays of particle-in-bowl plasmonic nanostructures for surface-enhanced raman scattering

A highly ordered particle-in-bowl (PIB) nanostructure array is designed and fabricated to achieve large field enhancement for the surface-enhanced Raman scattering (SERS) application. This new type of PIB structure is composed of an Ag particle located at the bottom of an Au bowl, and the two are separated by a precisely controlled nanoscale dielectric layer. The fabrication of the PIB structure is based on the self-assembly of polystyrene spheres and atomic layer deposition (ALD), which allows good control of the metal particle size and gap distance, as well as large-scale ordering. Numerical simulation reveals a high enhancement of the local field at the nanogaps. The SERS performance of the PIB arrays, and the effects of the Ag particle size and the ALD dielectric layer thickness are characterized, results of which are in reasonable agreement with simulation. With Rhodmaine 6G as the probe molecule, the spatially averaged SERS enhancement factor is on the order of 3.8 × 10(7) and the local field enhancement from simulation can be up to 10(8) .

Synthesis of silver nanoplates by two-dimensional oriented attachment

Synthesis of silver nanoplates was studied in the modified polyol method, where the nucleation and seed stage occurred in a poly(ethylene glycol) (PEG)-water mixture solution, and the growth stage happened in the PEG environment. The morphological evolution of nanoplates was characterized using UV, SEM, and TEM. Interestingly, plane nanostructures with unusual jagged edges were finally formed in our modified polyol method. Using TEM, we observed the medium state of fusion between two nanoplates, resulting in generating unusual jagged edges. Therefore, a novel two-dimensional oriented attachment occurred in our modified polyol method, which involves smaller nanoplates as the building blocks. Further control experiments showed that the presence of water could break this kinetic preferred reactivity, leading to the formation of nanoparticles.

Rapid transformation from spherical nanoparticles, nanorods, cubes, or bipyramids to triangular prisms of silver with PVP, citrate, and H2O2

Rapid sphere-to-prism (STP) transformation of silver was studied in aqueous AgNO(3)/NaBH(4)/polyvinylpyrrolidone (PVP)/trisodium citrate (Na(3)CA)/H(2)O(2) solutions by monitoring time-dependent surface plasmon resonance (SPR) bands in the UV-vis region, by examining transmission electron microscopic (TEM) images, and by analyzing emitted gases during fast reaction. Roles of PVP, Na(3)CA, and H(2)O(2) were studied without addition of a reagent, with different timing of each reagent's addition, and with addition of H(2)O(2) to mixtures of spheres and prisms. Results show that prisms can be prepared without addition of PVP, although it is useful to synthesize smaller monodispersed prisms. A new important role of citrate found in this study, besides a known role as a protecting agent of {111} facets of plates, is an assistive agent for shape-selective oxidative etching of Ag nanoparticles by H(2)O(2). The covering of Ag nanoparticles with carboxylate groups is necessary to initiate rapid STP transformation by premixing citrate before H(2)O(2) addition. Based on our data, rapid prism formation starts from the consumption of spherical Ag particles because of shape-selective oxidative etching by H(2)O(2). Oxidative etching of spherical particles by H(2)O(2) is faster than that of prisms. Therefore, spherical particles are selectively etched and dissolved, leaving only seeds of prisms to grow into triangular prisms. When pentagonal Ag nanorods and a mixture of cubes and bipyramids were used as sources of prisms, rod-to-prism (RTP), cube-to-prism (CTP), and bipyramid-to-prism (BTP) transformations were observed in Ag nanocrystals/NaBH(4)/PVP/Na(3)CA/H(2)O(2) solutions. Shape-selective oxidative etching of rods was confirmed using flag-type Ag nanostructures consisting of a triangular plate and a side rod. These data provide useful information for the size-controlled synthesis of triangular Ag prisms, from various Ag nanostructures and using a chemical reduction method, having surface plasmon resonance (SPR) bands at a desired wavelength.

Excitation polarization sensitivity of plasmon-mediated silver nanotriangle growth on a surface

In this contribution, we report an effective and relatively simple route to grow triangular flat-top silver nanoparticles (NPs) directly on a solid substrate from smaller NPs through a wet photochemical synthesis. The method consists of fixing small, preformed nanotriangles (NTs) on a substrate and subsequently irradiating them with light in a silver seed solution. Furthermore, the use of linearly polarized light allows for exerting control on the growth direction of the silver nanotriangles on the substrate. Evidence for the role of surface plasmon resonances in governing the growth of the NTs is obtained by employing linear polarized light. Thus, this study demonstrates that light-induced, directional synthesis of nanoparticles on solid substrates is in reach, which is of utmost importance for plasmonic applications.

Template-free synthesis of large anisotropic gold nanostructures on reduced graphene oxide

The morphologies/dimensions of Au nanostructures can be tailored by merely controlling the reduction degree of graphene oxide surface. Au nanoparticles, long Au nanowires, and semicircular-shaped Au nanoplates are in situ synthesized on slightly, moderately, and highly reduced graphene oxide films respectively, without the need of any templating agent.

Nanoplasmon-enhanced transparent plasma display devices

Plasmon-enhanced transparent plasma display devices are demonstrated via the resonant interface between Ag nanoparticles and a Eu(3+)-doped phosphor. Enhanced emission from the phosphor by metallic nanoparticles leads to an increase of the luminous efficacy in the transparent plasma display device. This is a prototype of the plasmon-enhanced transparent plasma display device.

Synthesis of gold nanocubes in aqueous solution with remarkable shape-selectivity

This paper reports a facile method to prepare gold nanocubes with an average size length of 13 ± 2 nm, a shape selectivity >90%, and a very good reproducibility. The gold nanocubes were prepared by photocatalytic reduction of Au(III) using a cationic, water soluble porphyrin as the photocatalyst, and cetyltrimethylammonium bromide as the capping agent. The synthesis is performed in water, at pH 7, and room temperature. The nanocubes were characterized by transmission electron microscopy, scanning electron microscopy, atomic force microscopy, and X-ray phototelectron spectroscopy. Shape selectivity for the synthesis of nanocubes is due to a different rate of growth of the (100) and (111) facets of the nanoparticles, and such control in this synthesis is achieved by careful selection of the initial gold precursor for the photocatalytic cycle.

Nanoantennas for visible and infrared radiation

Nanoantennas for visible and infrared radiation can strongly enhance the interaction of light with nanoscale matter by their ability to efficiently link propagating and spatially localized optical fields. This ability unlocks an enormous potential for applications ranging from nanoscale optical microscopy and spectroscopy over solar energy conversion, integrated optical nanocircuitry, opto-electronics and density-of-states engineering to ultra-sensing as well as enhancement of optical nonlinearities. Here we review the current understanding of metallic optical antennas based on the background of both well-developed radiowave antenna engineering and plasmonics. In particular, we discuss the role of plasmonic resonances on the performance of nanoantennas and address the influence of geometrical parameters imposed by nanofabrication. Finally, we give a brief account of the current status of the field and the major established and emerging lines of investigation in this vivid area of research.

Assembly of reconfigurable one-dimensional colloidal superlattices due to a synergy of fundamental nanoscale forces

We report that triangular gold nanoprisms in the presence of attractive depletion forces and repulsive electrostatic forces assemble into equilibrium one-dimensional lamellar crystals in solution with interparticle spacings greater than four times the thickness of the nanoprisms. Experimental and theoretical studies reveal that the anomalously large d spacings of the lamellar superlattices are due to a balance between depletion and electrostatic interactions, both of which arise from the surfactant cetyltrimethylammonium bromide. The effects of surfactant concentration, temperature, ionic strength of the solution, and prism edge length on the lattice parameters have been investigated and provide a variety of tools for in situ modulation of these colloidal superstructures. Additionally, we demonstrate a purification procedure based on our observations that can be used to efficiently separate triangular nanoprisms from spherical nanoparticles formed concomitantly during their synthesis.

Quantitative analysis of the role played by poly(vinylpyrrolidone) in seed-mediated growth of Ag nanocrystals

This article presents a quantitative analysis of the role played by poly(vinylpyrrolidone) (PVP) in seed-mediated growth of Ag nanocrystals. Starting from Ag nanocubes encased by {100} facets as the seeds, the resultant nanocrystals could take different shapes depending on the concentration of PVP in the solution. If the concentration was above a critical value, the seeds simply grew into larger cubes still enclosed by {100} facets. When the concentration fell below a critical value, the seeds would evolve into cuboctahedrons enclosed by a mix of {100} and {111} facets and eventually octahedrons completely covered by {111} facets. We derived the coverage density of PVP on Ag(100) surface by combining the results from two measurements: (i) cubic seeds were followed to grow at a fixed initial concentration of PVP to find out when {111} facets started to appear on the surface, and (ii) cubic seeds were allowed to grow at reduced initial concentrations of PVP to see at which concentration {111} facets started to appear from the very beginning. We could calculate the coverage density of PVP from the differences in PVP concentration and the total surface area of Ag nanocubes between these two samples. The coverage density was found to be 140 and 30 repeating units per nm(2) for PVP of 55,000 and 10,000 g/mol in molecular weight, respectively, for cubic seeds of 40 nm in edge length. These values dropped slightly to 100 and 20 repeating units per nm(2), respectively, when 100 nm Ag cubes were used as the seeds.

Ecofriendly Synthesis of Anisotropic Gold Nanoparticles: A Potential Candidate of SERS Studies

Ecofriendly synthesis of nanoparticles has been inspiring to nanotechnologists especially for biomedical applications. Moreover, anisotropic particle synthesis is an attractive option due to decreased symmetry of such particles often leads to new and unusual chemical and physical behaviour. This paper reports a single-step room-temperature synthesis of gold nanotriangles using a cheap bioresource of reducing and stabilizing agentPiper betleleaf extract. On treating aqueous chloroauric acid solution withPiper betleleaf extract, after 12 hr, complete reduction of the chloroaurate ions was observed leading to the formation of flat and single crystalline gold nanotriangles. These gold nanotriangles can be exploited in photonics, optical coating, optoelectronics, magnetism, catalysis, chemical sensing, and so forth, and are a potential candidate of SERS studies.

Soft tissue response to the presence of polypropylene-G-poly(ethylene glycol) comb-type graft copolymers containing gold nanoparticles

The aim of this study is to evaluate the soft tissue response of the pure and Au-embedded PPg-PEG. PP-g-PEG2000, PP-g-PEG4000, Au-PP-g-PEG2000, and AuPP-g-PEG4000 were obtained via chlorination of polypropylene and polyethylene glycol in the presence of a base with a “grafting onto” technique. Solvent cast films of these four copolymers with PP as a control group were embedded into five different rats. After 30 days of implantation, microscopic evaluation of inflammation and SEM analysis were done. PP had the most intense inflammatory reaction among the other polymers. PP-PEG block copolymers with high molecular weight and gold-nanoparticles-embedded ones revealed mild inflammatory reaction independently. SEM assessment revealed punched hole-like defects on the surface of all polymer samples except for PP. Graft copolymers with PEG, especially Au-attached ones, have favorable soft tissue response, and inflammatory reaction becomes milder as the number of PEG side chains increases.

Biomedical applications of photoacoustic imaging with exogenous contrast agents

Photoacoustic imaging is a biomedical imaging modality that provides functional information, and, with the help of exogenous contrast agents, cellular and molecular signatures of tissue. In this article, we review the biomedical applications of photoacoustic imaging assisted with exogenous contrast agents. Dyes, noble metal nanoparticles, and other constructs are contrast agents which absorb strongly in the near-infrared band of the optical spectrum and generate strong photoacoustic response. These contrast agents, which can be specifically targeted to molecules or cells, have been coupled with photoacoustic imaging for preclinical and clinical applications ranging from detection of cancer cells, sentinel lymph nodes, and micrometastasis to angiogenesis to characterization of atherosclerotic plaques. Multi-functional agents have also been developed, which can carry drugs or simultaneously provide contrast in multiple imaging modalities. Furthermore, contrast agents were used to guide and monitor the therapeutic procedures. Overall, photoacoustic imaging shows significant promise in its ability to assist in diagnosis, therapy planning, and monitoring of treatment outcome for cancer, cardiovascular disease, and other pathologies.

A systematic study of the synthesis of silver nanoplates: is citrate a "magic" reagent?

In this work we have carried out systematic studies and identified the critical role of hydrogen peroxide instead of the generally believed citrate in the well-known chemical reduction route to silver nanoplates. This improved understanding allows us to develop consistently reproducible processes for the synthesis of nanoplates with high efficiency and yields. By harnessing the oxidative power of H(2)O(2), various silver sources including silver salts and metallic silver can be directly converted to nanoplates with the assistance of an appropriate capping ligand, thus significantly enhancing the reproducibility of the synthesis. Contrary to the previous conclusion that citrate is the key component, we have determined that the group of ligands with selective adhesion to Ag (111) facets can be expanded to many di- and tricarboxylate compounds whose two nearest carboxylate groups are separated by two or three carbon atoms. We have also found that the widely used secondary ligand polyvinylpyrrolidone can be replaced by many hydroxyl group-containing compounds or even removed entirely while still producing nanoplates of excellent uniformity and stability. In addition to the general understanding of NaBH(4) as a reducing agent, it has also been found to act as a capping agent to stabilize the silver nanoparticles, prolong the initiation time required for nanoplate nucleation, and contribute to the control of the thickness as well as the aspect ratio of silver nanoplates. The improved insight into the specific roles of the reaction components and significantly enhanced reproducibility are expected to help elucidate the formation mechanism of this interesting nanostructure.

Synthesis of uniform gold nanoparticles using non-pathogenic bio-control agent: evolution of morphology from nano-spheres to triangular nanoprisms

Green synthesis of gold nanospheres with uniform diameter and triangular nanoprisms with optically flat surface was carried out using a non-pathogenic bio-control agent Trichoderma asperellum for reduction of HAuCl(4). Kinetics of the reaction was monitored by UV-Vis absorption spectroscopy. No additional capping/complexing agent was used for stabilizing the gold nanoparticles. Evolution of morphology from pseudospherical nanoparticles to triangular nanoprisms was studied by transmission electron microscopy (TEM). It revealed that three or more pseudospheres fused to form nanoprisms of different shapes and sizes. Slow rate of reduction of HAuCl(4) by constituents of cell-free fungal extract was instrumental in producing such exotic morphologies. Isolation of gold nanotriangles from the reacting masses was achieved by differential centrifugation.

Shape-tailoring and catalytic function of anisotropic gold nanostructures

We report a facile, one-pot, shape-selective synthesis of gold nanoparticles in high yield by the reaction of an aqueous potassium tetrachloroaurate(III) solution with a commercially available detergent. We prove that a commercial detergent can act as a reducing as well as stabilizing agent for the synthesis of differently shaped gold nanoparticles in an aqueous solution at an ambient condition. It is noteworthy that the gold nanoparticles with different shapes can be prepared by simply changing the reaction conditions. It is considered that a slow reduction of the gold ions along with shape-directed effects of the components of the detergent plays a vital function in the formation of the gold nanostructures. Further, the as-prepared gold nanoparticles showed the catalytic activity for the reduction reaction of 4-nitrophenol in the presence of sodium borohydride at room temperature.