Green Analytical Chemistry

A simplified analysis of dimethylarsinic acid by wavelength dispersive X-ray fluorescence spectrometry combined with a strong cation exchange disk

Dimethylarsinic acid (DMA(V)) was pre-concentrated from water samples using a strong cation exchange (SCX) disk functionalized with sulfonic groups, before being analyzed by wavelength dispersive X-ray fluorescence spectrometry (WDXRF). The adsorption of DMA(V) occurred preferentially on the surface of the SCX disk, regardless of pH levels, probably due to interactions with the sulfonic functional groups. However, no other arsenic species, such as arsenate (iAs(V)), arsenite (iAs(III)), and monomethylarsonic acid (MMA(V)), were retained. The SCX-WDXRF method produced a strongly linear calibration curve (R(2)=0.9996) with its limit of detection at 0.218 μgL(-1) when a one-liter water sample was used for pre-concentration. The As intensity of the system was sensitive to the Pb content retained on the SCX disk owing to the proximity of the As-Kα and Pb-Lα lines. To compensate for this interference, a correction factor was developed by considering the calibration slope ratio between the X-ray intensity measured at a Bragg angle of 48.781° and the Pb content of the SCX disks. The results of spike tests for iAs(V), iAs(III), MMA(V), and DMA(V) with and without the addition of Pb in synthetic landfill leachate exhibited reasonable recoveries (i.e., 98-105%) after the spectral adjustment for the Pb interference.

Reagent-free determination of amikacin content in amikacin sulfate injections by FTIR derivative spectroscopy in a continuous flow system

The quantitative estimation of amikacin (AMK) in AMK sulfate injection samples is reported using FTIR-derivative spectrometric method in a continuous flow system. Fourier transform of mid-IR spectra were recorded without any sample pretreatment. A good linear calibration (r>0.999, %RSD<2.0) in the range of 7.7–77.0 mg/mL was found. The results showed a good correlation with the manufacturer's and overall they all fell within acceptable limits of most pharmacopoeial monographs on AMK sulfate.

The advantages of microflow LC–MS/MS compared with conventional HPLC–MS/MS for the analysis of methotrexate from human plasma

Background: In support of bioanalysis, there has always been a desire to improve detection limits and reduce scale. Microflow LC (MFLC) coupled with MS accomplishes both of these goals. Results: As such, MFLC coupled with an MS system was used to generate bioanalytical validation data that met US FDA criteria. The MFLC–MS/MS data was compared with the same method with the use of conventional HPLC–MS/MS and a more than 14× S/N improvement was found with the MFLC–MS/MS method. Methotrexate was used as a model molecule to demonstrate the validation of the method from human plasma. The MFLC–MS/MS method was demonstrated to be accurate (±7%) and precise (12.9% at the LLOQ and a maximum of 11.6% at all other concentrations) across the dynamic range of the assay (1–1000 ng/ml) and compared well with the HPLC–MS/MS method. The MFLC bioanalytical validation was performed at a flow rate of 35 µl/min on a 0.5-mm inner diameter (I.D.) column, whereas, for the same linear velocities on the 2.0-mm I.D. column, the conventional HPLC bioanalytical validation was performed at 700 µl/min. Since the flow rate of the MFLC system is 20-times less than the HPLC system, the consumable solvent and disposal cost to perform the MFLC validation was significantly less. Conclusion: MFLC–MS/MS can be used to perform bioanalytical method validations with increased MS signal, reduced source contamination and reduced solvent consumption.

Graphene: a platform for surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy (SERS) imparts Raman spectroscopy with the capability of detecting analytes at the single-molecule level, but the costs are also manifold, such as a loss of signal reproducibility. Despite remarkable steps having been taken, presently SERS still seems too young to shoulder analytical missions in various practical situations. By the virtue of its unique molecular structure and physical/chemical properties, the rise of graphene opens up a unique platform for SERS studies. In this review, the multi-role of graphene played in SERS is overviewed, including as a Raman probe, as a substrate, as an additive, and as a building block for a flat surface for SERS. Apart from versatile improvements of SERS performance towards applications, graphene-involved SERS studies are also expected to shed light on the fundamental mechanism of the SERS effect.

Synergistic relationships between Analytical Chemistry and written standards

This paper describes the mutual impact of Analytical Chemistry and several international written standards (norms and guides) related to knowledge management (CEN-CWA 14924:2004), social responsibility (ISO 26000:2010), management of occupational health and safety (OHSAS 18001/2), environmental management (ISO 14001:2004), quality management systems (ISO 9001:2008) and requirements of the competence of testing and calibration laboratories (ISO 17025:2004). The intensity of this impact, based on a two-way influence, is quite different depending on the standard considered. In any case, a new and fruitful approach to Analytical Chemistry based on these relationships can be derived.

Fast and selective pressurized liquid extraction with simultaneous in cell clean up for the analysis of alkylphenols and bisphenol A in bivalve molluscs

A novel and green analytical methodology for the determination of alkylphenols (4-tert-octylphenol, 4-n-octylphenol, 4-n-nonylphenol, nonylphenol technical mixture) and bisphenol A in bivalve mollusc samples was developed and validated. The method was based on selective pressurized liquid extraction (SPLE) with a simultaneous in cell clean up combined with liquid chromatography–electrospray ionization tandem mass spectrometry in negative mode (LC–ESI-MS/MS). Quantitation was performed by standard addition curves in order to correct matrix effects. The analytical features of the method were satisfactory: relative recoveries varied between 80 and 107% and repeatability and intermediate precision were <20% for all compounds. Uncertainty assessment of measurement was estimated on the basis of an in-house validation according to EURACHEM/CITAC guide. Quantitation limits of the method (MQL) ranged between 0.34 (4-n-octylphenol) and 3.6 ng g(−1) dry weight (nonylphenol). The main advantages of the method are sensitivity, selectivity, automaticity, low volumes of solvents required and low sample analysis time (according with the principles of Green Chemistry). The method was applied to the analysis of mussel samples of Galicia coast (NW of Spain). Nonylphenol and 4-tert-octylphenol were measured in all samples at concentrations between 9.3 and 372 ng g(−1) dw. As an approach, the human daily intake of these compounds was estimated and no risk for human health was found.

UHPLC: The Greening Face of Liquid Chromatography

Pharmaceutical analysis based on chromatographic separation is an important part of studies aimed at developing routine quality analysis of drugs. High-performance liquid chromatography (HPLC) is one of the main analytical techniques recommended for drug analysis. Although it meets many criteria vital for analysis, it is time-consuming and uses a relatively high amount of organic solvents compared to other analytical techniques. Recently, Ultra-high-performance liquid chromatography (UHPLC) has been frequently proposed as an alternative to HPLC, which means introducing an environment-friendly approach to drug analysis achieved by reducing the consumption of solvents. It also offers greater chromatographic resolution and higher sensitivity as well as requiring less time due to faster analysis. This review focuses on the basics of UHPLC, compares that technique with HPLC and discusses the possibilities of applying UHPLC for the analysis of different pharmaceuticals and biopharmaceuticals.

Cisapride a green analytical reagent for rapid and sensitive determination of bromate in drinking water, bread and flour additives by oxidative coupling spectrophotometric methods

Green analytical methods using Cisapride (CPE) as green analytical reagent was investigated in this work. Rapid, simple, and sensitive spectrophotometric methods for the determination of bromate in water sample, bread and flour additives were developed. The proposed methods based on the oxidative coupling between phenoxazine and Cisapride in the presence of bromate to form red colored product with max at 520 nm. Phenoxazine and Cisapride and its reaction products were found to be environmentally friendly under the optimum experimental condition. The method obeys beers law in concentration range 0.11-4.00 g ml(-1) and molar absorptivity 1.41 × 10(4) L mol(-1)cm(-1). All variables have been optimized and the presented reaction sequences were applied to the analysis of bromate in water, bread and flour additive samples. The performance of these method was evaluated in terms of Student's t-test and variance ratio F-test to find out the significance of proposed methods over the reference method. The combination of pharmaceutical drugs reagents with low concentration create some unique green chemical analyses.

Food Analysis: Present, Future, and Foodomics

This paper presents a revision on the instrumental analytical techniques and methods used in food analysis together with their main applications in food science research. The present paper includes a brief historical perspective on food analysis, together with a deep revision on the current state of the art of modern analytical instruments, methodologies, and applications in food analysis with a special emphasis on the works published on this topic in the last three years (2009–2011). The article also discusses the present and future challenges in food analysis, the application of “omics” in food analysis (including epigenomics, genomics, transcriptomics, proteomics, and metabolomics), and provides an overview on the new discipline of Foodomics.

Applications of quantum dots as probes in immunosensing of small-sized analytes

Quantum dots (QDs) are semiconductor nanoparticles with very interesting optical properties, like high quantum yield or narrow and size-tuneable fluorescence spectra. Current applications of QDs are widespread, their use as fluorescence labels in bioassays being one of the most promising. These nanoparticles are usually conjugated to highly specific biomolecules like antibodies, oligonucleotides, enzymes or aptamers to improve assay selectivity. In this review, QD surface passivation, conjugation to biomolecules, and purification strategies are discussed with special emphasis to the development of QD-based immunoassays for the detection of low molecular weight compounds given the relevance of this sort of analytes in health, food safety, pharmaceutical, or environmental monitoring areas. The aim of this review is to summarise the main achievements attained so far and to initialise researchers in the field of antibody-based assays employing QDs as labels, such as fluorescence-linked immunosorbent assay (FLISA), fluorescence (or Förster) resonance energy transfer (FRET), immunochromatographic methods, and immunosensors.

Reagent-free analytical flow methods for the soft drink industry: Efforts for environmentally friendly chemical analysis

The evolution of an entirely green analytical system for industrial quality control of carbonated drinks is described. The developed flow system is capable of providing analytical data of the dissolved CO2, sucrose, and color of a sample consecutively in real-time. The system has been carefully designed on the basis of “reagent-free”, meaning that no added chemicals are required for the analysis. The system first vaporizes CO2 from the soft drink in a gas–liquid separation chamber, with a channel for a flow of pure water as the CO2 acceptor. The dissolved CO2 alters the conductivity of the water stream, which is directly related to the concentration of CO2 in the soft drink. The sucrose content is measured based on the “schlieren effect”, the sample plug flows out of the vaporization chamber into a colorimeter with a near-infrared/light-emitting diode (NIR/LED) as light source. The schlieren effect arises at the boundary of pure water and soft drink with refraction of light in proportion to the sugar concentration. The system also measures the absorbance of the sample using an RGB-LED. The related principles and preliminary experiments as proof of concept are described as well as the construction of the flow system for this completely reagent-free analyzer. A simple flow injection system using the schlieren effect was also developed for rapid quantitative analysis of sugar in noncarbonated soft drinks.

Present and future challenges in food analysis: foodomics

The state-of-the-art of food analysis at the beginning of the 21st century is presented in this work, together with its major applications, current limitations, and present and foreseen challenges.

Preliminary results on the use of leather chrome shavings for air passive sampling

A new passive sampler based on low-density polyethylene (LDPE) layflat tube filled with chrome shavings from tannery waste residues was evaluated to determine volatile organic compounds (VOCs) in indoor and outdoor areas. VOCs were directly determined by head space-gas chromatography-mass spectrometry (HS-GC-MS) without any pretreatment of the sampler and avoiding the use of solvents. Limit of detection values ranging from 20 to 75 ng sampler(-1) and good repeatability values were obtained for VOCs under study with relative standard deviation values from 2.8 to 9.6% except for carbon disulfide for which it was 22.5%. The effect of the amount of chrome shavings per sampler was studied and results were compared with those obtained using empty LDPE tubes, to demonstrate the capacity of chrome shavings to adsorb VOCs.

The use of amberlite adsorbents for green chromatography determination of volatile organic compounds in air

Passive samplers have been widely used for volatile organic compounds determination. Following the green chemistry tendency of the direct determination of adsorbed compounds in membrane-based devices through using head space direct chromatography analysis, this work has evaluated the use of Amberlite XAD-2, XAD-4, and XAD-16 adsorbents as a filling material for passive samplers. Direct analysis of the membranes by HS-GC-MS involves a solvent-free method avoiding any sample treatment. For exposed membranes, recoveries ranged from 10% to 203%, depending on the compound and adsorbent used. The limit of the detection values ranged from 1 to 140 ng per sampler. Acceptable precision and sensitivity levels were obtained for the XAD resins assayed.

Green extraction of natural products: concept and principles

The design of green and sustainable extraction methods of natural products is currently a hot research topic in the multidisciplinary area of applied chemistry, biology and technology. Herein we aimed to introduce the six principles of green-extraction, describing a multifaceted strategy to apply this concept at research and industrial level. The mainstay of this working protocol are new and innovative technologies, process intensification, agro-solvents and energy saving. The concept, principles and examples of green extraction here discussed, offer an updated glimpse of the huge technological effort that is being made and the diverse applications that are being developed.

Considerations on the application of miniaturized sample preparation approaches for the analysis of organic compounds in environmental matrices

The miniaturization and improvement of sample preparation is a challenge that has been fulfilled up to a point in many fields of analytical chemistry. Particularly, the hyphenation of microextraction with advanced analytical techniques has allowed the monitoring of target analytes in a vast variety of environmental samples. Several benefits can be obtained when miniaturized techniques such as solid-phase microextraction (SPME) or liquid-phase microextraction (LPME) are applied, specifically, their easiness, rapidity and capability to separate and pre-concentrate target analytes with a negligible consumption of organic solvents. In spite of the great acceptance that these green sample preparation techniques have in environmental research, their full implementation has not been achieved or even attempted in some relevant environmental matrices. In this work, a critical review of the applications of LPME and SPME techniques to isolate and pre-concentrate traces of organic pollutants is provided. In addition, the influence of the environmental matrix on the effectiveness of LPME and SPME for isolating the target organic pollutants is addressed. Finally, unsolved issues that may hinder the application of these techniques for the extraction of dissolved organic matter from environmental samples and some suggestions for developing novel and less selective enrichment and isolation procedures for natural organic matter on the basis of SPME and LPME are included.

Green bioanalysis: some innovative ideas towards green analytical techniques

The key target of green chemistry is to make compounds and materials available to mankind, while causing no harm to the environment. In the 21st century analytical scientists are more concerned about green analytical method development. The number of literatures on green chemistry has undergone a dramatic increase in the new millennium. Green bioanalytical techniques aim to minimize or eliminate the hazardous waste associated with bioanalytical methods. An efficient and sincere approach towards bioanalytical method development has an enormous contribution towards green analysis. The selection of organic constituents of the mobile phase, choice of sample extraction process, adoption of an appropriate separation procedure and a few others, control the green chemistry approach of the bioanalytical method. In routine practice, UHPLC–MS can be the most suitable approach, while supercritical fluid chromatography is one of the best available techniques for green bioanalytical methods. Nevertheless, there always remains great scope of further research on green bioanalytical methods.

Ecofriendly in-line process monitoring: a case study. Anthracene photodegradation in the presence of refuse-derived soluble bio-organics

Photodegradation of anthracene has been studied in aqueous solutions containing soluble bio-organic substances isolated from urban refuse. To perform a preliminary rapid feasibility study of this process while reducing the amount of analytical effort and reagents, an experimental set-up was developed comprising a Teflon coil surrounding a UV-lamp and coupled with an in-line spectrofluorimeter. In this fashion only few millilitres of solution are needed to study the degradation process. Furthermore, the in-line spectroscopic approach enables monitoring of the process without consumption of reagents. Additional studies by liquid chromatography and use of toxicity tests clearly indicated that the apparent inhibition effect of bio-organic compounds on anthracene degradation is not relevant. The results imply that urban refuse may be used as an auxiliary in the recovery of polycyclic aromatic hydrocarbons from contaminated soil by washing, without deleterious effects on the photodegradation of anthracene and other aromatic pollutants.