Amyloid fibril formation by A beta 16-22, a seven-residue fragment of the Alzheimer's beta-amyloid peptide, and structural characterization by solid state NMR

Aggregation of beta-amyloid fragments

The authors study the folding and aggregation of six chains of the beta-amyloid fragment 16-22 using Monte Carlo simulations. While the isolated fragment prefers a helical form at room temperature, in the system of six interacting fragments one observes both parallel and antiparallel beta sheets below a crossover temperature T(x) approximately equal to 420 K. The antiparallel sheets have lower energy and are therefore more stable. Above the nucleation temperature the aggregate quickly dissolves into widely separated, weakly interacting chains.

Dissociation of Abeta(16-22) amyloid fibrils probed by molecular dynamics

The mechanisms of deposition and dissociation are implicated in the assembly of amyloid fibrils. To investigate the kinetics of unbinding of Abeta(16-22) monomers from preformed fibrils, we use molecular dynamics (MD) simulations and the structures for Abeta(16-22) amyloid fibrils. Consistent with experimental studies, the dissociation of Abeta(16-22) peptides involves two main stages, locked and docked, after which peptides unbind. The lifetime of the locked state, in which a peptide retains fibril-like structure and interactions, extends up to 0.5 micros under normal physiological conditions. Upon cooperative rupture of all fibril-like hydrogen bonds (HBs) with the fibril, a peptide enters a docked state. This state is populated by disordered random coil conformations and its lifetime ranges from approximately 10 to 200 ns. The docked state is stabilized by hydrophobic side chain interactions, while the contribution from HBs is small. Our simulations also suggest that the peptides located on fibril edges may form stable beta-strand conformations distinct from the fibril "bulk". We propose that such edge peptides can act as fibril caps, which impede fibril elongation. Our results indicate that the interactions between unbinding peptides constitute the molecular basis for cooperativity of peptide dissociation. The kinetics of fibril growth is reconstructed from unbinding assuming the reversibility of deposition/dissociation pathways. The relation of in silica dissociation kinetics to experimental observations is discussed.

Probing amyloid fibril formation of the NFGAIL peptide by computer simulations

Amyloid fibril formation, as observed in Alzheimer's disease and type II diabetes, is currently described by a nucleation-condensation mechanism, but the details of the process preceding the formation of the nucleus are still lacking. In this study, using an activation-relaxation technique coupled to a generic energy model, we explore the aggregation pathways of 12 chains of the hexapeptide NFGAIL. The simulations show, starting from a preformed parallel dimer and ten disordered chains, that the peptides form essentially amorphous oligomers or more rarely ordered beta-sheet structures where the peptides adopt a parallel orientation within the sheets. Comparison between the simulations indicates that a dimer is not a sufficient seed for avoiding amorphous aggregates and that there is a critical threshold in the number of connections between the chains above which exploration of amorphous aggregates is preferred.

The Structure of the Alzheimer Amyloid β 10-35 Peptide Probed through Replica-Exchange Molecular Dynamics Simulations in Explicit Solvent

The conformational states sampled by the Alzheimer amyloid beta (10-35) (Abeta 10-35) peptide were probed using replica-exchange molecular dynamics (REMD) simulations in explicit solvent. The Abeta 10-35 peptide is a fragment of the full-length Abeta 40/42 peptide that possesses many of the amyloidogenic properties of its full-length counterpart. Under physiological temperature and pressure, our simulations reveal that the Abeta 10-35 peptide does not possess a single unique folded state. Rather, this peptide exists as a mixture of collapsed globular states that remain in rapid dynamic equilibrium with each other. This conformational ensemble is dominated by random coil and bend structures with insignificant presence of an alpha-helical or beta-sheet structure. The 3D structure of Abeta 10-35 is seen to be defined by a salt bridge formed between the side-chains of K28 and D23. This salt bridge is also observed in Abeta fibrils and our simulations suggest that monomeric conformations of Abeta 10-35 contain pre-folded structural motifs that promote rapid aggregation of this peptide.

Self assembly of short aromatic peptides into amyloid fibrils and related nanostructures

The formation of amyloid fibrils is the hallmark of more than twenty human disorders of unrelated etiology. In all these cases, ordered fibrillar protein assemblies with a diameter of 7-10 nm are being observed. In spite of the great clinical important of amyloid-associated diseases, the molecular recognition and self-assembly processes that lead to the formation of the fibrils are not fully understood. One direction to decipher the mechanism of amyloid formation is the use of short peptides fragments as model systems. Short peptide fragments, as short as pentapeptides, were shown to form typical amyloid assemblies in vitro that have ultrastructural, biophysical, and cytotoxic properties, as those of assemblies that are being formed by full length polypeptides. When we analyzed such short fragments, we identified the central role of aromatic moieties in the ability to aggregate into ordered nano-fibrillar structures. This notion allowed us to discover additional very short amyloidogenic peptides as well as other aromatic peptide motifs, which can form various assemblies at the nano-scale (including nanotubes, nanospheres, and macroscopic hydrogels with nano-scale order). Other practical utilization of this concept, together with novel beta breakage methods, is their use for the development of novel classes of amyloid formation inhibitors.

Nanotools for megaproblems: probing protein misfolding diseases using nanomedicine modus operandi

Misfolding and self-assembly of proteins in nanoaggregates of different sizes and morphologies (nanoensembles, primary nanofilaments, nanorings, filaments, protofibrils, fibrils, etc.) is a common theme unifying a number of human pathologies termed protein misfolding diseases. Recent studies highlight increasing recognition of the public health importance of protein misfolding diseases, including various neurodegenerative disorders and amyloidoses. It is understood now that the first essential elements in the vast majority of neurodegenerative processes are misfolded and aggregated proteins. Altogether, the accumulation of abnormal protein nanoensembles exerts toxicity by disrupting intracellular transport, overwhelming protein degradation pathways, and/or disturbing vital cell functions. In addition, the formation of inclusion bodies is known to represent a major problem in the production of recombinant therapeutic proteins. Formulation of these therapeutic proteins into delivery systems and their in vivo delivery are often complicated by protein association. Thus, protein folding abnormalities and subsequent events underlie a multitude of human pathologies and difficulties with protein therapeutic applications. The field of medicine therefore can be greatly advanced by establishing a fundamental understanding of key factors leading to misfolding and self-assembly responsible for various protein folding pathologies. This article overviews protein misfolding diseases and outlines some novel and advanced nanotechnologies, including nanoimaging techniques, nanotoolboxes and nanocontainers, complemented by appropriate ensemble techniques, all focused on the ultimate goal to establish etiology and to diagnose, prevent, and cure these devastating disorders.

Amyloid of the prion domain of Sup35p has an in-register parallel beta-sheet structure

The [PSI(+)] prion of Saccharomyces cerevisiae is a self-propagating amyloid form of Sup35p, a subunit of the translation termination factor. Using solid-state NMR we have examined the structure of amyloid fibrils formed in vitro from purified recombinant Sup35(1-253), consisting of the glutamine- and asparagine-rich N-terminal 123-residue prion domain (N) and the adjacent 130-residue highly charged M domain. Measurements of magnetic dipole-dipole couplings among (13)C nuclei in a series of Sup35NM fibril samples, (13)C-labeled at backbone carbonyl sites of Tyr, Leu, or Phe residues or at side-chain methyl sites of Ala residues, indicate intermolecular (13)C-(13)C distances of approximately 0.5 nm for nearly all sites in the N domain. Certain sites in the M domain also exhibit intermolecular distances of approximately 0.5 nm. These results indicate that an in-register parallel beta-sheet structure underlies the [PSI(+)] prion phenomenon.

Controlling amyloid growth in multiple dimensions

The great progress made in defining the structure of protein and peptide amyloid assemblies, particularly the arrangement of peptides in beta-sheets, is counterbalanced by the still poor understanding of the higher organization of beta-sheets within the fibril and overall fibril/fibril associations. The assembly pathway and basis of amyloid toxicity may well depend on these higher-order structural features. For example, significant evidence points to association between sheets as the rate limiting step in fibril assembly, and a critical metal binding site has now been identified that involves residues from different individual sheets. Here we review experiments that are identifying some of the issues associated with sheet-sheet association by investigating simple model peptides derived from the central core of the Abeta peptide implicated in Alzheimer's disease. These peptides transit between fibril/ribbon/nanotube morphologies in response to assembly conditions, laying the foundation for understanding the folding landscape for these higher order assemblies, revealing potential targets for therapeutic intervention, and opening strategies for the design of highly ordered peptide self-assembled microscale morphologies.

Insight into the structure of amyloid fibrils from the analysis of globular proteins

The conversion from soluble states into cross-β fibrillar aggregates is a property shared by many different proteins and peptides and was hence conjectured to be a generic feature of polypeptide chains. Increasing evidence is now accumulating that such fibrillar assemblies are generally characterized by a parallel in-register alignment of β-strands contributed by distinct protein molecules. Here we assume a universal mechanism is responsible for β-structure formation and deduce sequence-specific interaction energies between pairs of protein fragments from a statistical analysis of the native folds of globular proteins. The derived fragment–fragment interaction was implemented within a novel algorithm, prediction of amyloid structure aggregation (PASTA), to investigate the role of sequence heterogeneity in driving specific aggregation into ordered self-propagating cross-β structures. The algorithm predicts that the parallel in-register arrangement of sequence portions that participate in the fibril cross-β core is favoured in most cases. However, the antiparallel arrangement is correctly discriminated when present in fibrils formed by short peptides. The predictions of the most aggregation-prone portions of initially unfolded polypeptide chains are also in excellent agreement with available experimental observations. These results corroborate the recent hypothesis that the amyloid structure is stabilised by the same physicochemical determinants as those operating in folded proteins. They also suggest that side chain–side chain interaction across neighbouring β-strands is a key determinant of amyloid fibril formation and of their self-propagating ability.

In many fatal neurodegenerative diseases, including Alzheimer, Parkinson, and spongiform encephalopathies, proteins aggregate into specific fibrous structures to form insoluble plaques known as amyloid. The amyloid structure may also play a nonaberrant role in different organisms. Many globular proteins, folding to their biologically functional native structures in vivo, can be induced to aggregate into amyloid-like fibrils under suitable conditions in vitro. One hallmark of amyloid structure is a specific supramolecular architecture called cross-beta structure, held together by hydrogen bonds extending repeatedly along the fibril axis, but intermolecular interactions are yet unknown at the amino-acid level except for very few cases. In this study, the authors present an algorithm, called prediction of amyloid structure aggregation (PASTA), to computationally predict which portions of a given protein or peptide sequence forming amyloid fibrils are stabilizing the corresponding cross-beta structure and the specific intermolecular pattern of hydrogen-bonded amino acids. PASTA is based on the assumption that the same amino acid–specific interactions stabilizing hydrogen bond patterns in native structures of globular proteins are also employed by nature in amyloid structure. The successful comparison of the authors' prediction with available experimental data supports the existence of a unique framework to describe protein folding and aggregation.

Molecular alignment within beta-sheets in Abeta(14-23) fibrils: solid-state NMR experiments and theoretical predictions

We report investigations of the molecular structure of amyloid fibrils formed by residues 14-23 of the beta-amyloid peptide associated with Alzheimer's disease (Abeta(14-23)), using solid-state nuclear magnetic resonance (NMR) techniques in conjunction with electron microscopy and atomic force microscopy. The NMR measurements, which include two-dimensional proton-mediated (13)C-(13)C exchange and two-dimensional relayed proton-mediated (13)C-(13)C exchange spectra, show that Abeta(14-23) fibrils contain antiparallel beta-sheets with a registry of backbone hydrogen bonds that aligns residue 17+k of each peptide molecule with residue 22-k of neighboring molecules in the same beta-sheet. We compare these results, as well as previously reported experimental results for fibrils formed by other beta-amyloid fragments, with theoretical predictions of molecular alignment based on databases of residue-specific alignments in antiparallel beta-sheets in known protein structures. While the theoretical predictions are not in exact agreement with the experimental results, they facilitate the design of experiments by suggesting a small number of plausible alignments that are readily distinguished by solid-state NMR.

Aggregation of the Amphipathic Peptides (AAKA)n into Antiparallel β-Sheets

Helical wheel projections of peptides based on the repeating unit Ac-(AAKA)n-NH2 clearly illustrate an amphipathic nature. One should therefore expect these peptides to form helices if the number of residues exceeds a certain threshold value. Indeed, ECD measurements show that Ac-(AAKA)4-NH2 and, to a minor extent, also Ac-(AAKA)3-NH2 exhibit some helical content at millimolar concentrations in aqueous solution. Surprisingly, however, these peptides were found to form hydrogels with an antiparallel beta-sheet conformation at centimolar concentrations. This occurs despite the positively charged lysine side chain which would be expected to inhibit the formation of extended beta-sheet layers.

Thermodynamics of beta-amyloid fibril formation

Amyloid fibers are aggregates of proteins. They are built out of a peptide called beta-amyloid (Abeta) containing between 41 and 43 residues, produced by the action of an enzyme which cleaves a much larger protein known as the amyloid precursor protein (APP). X-ray diffraction experiments have shown that these fibrils are rich in beta-structures, whereas the shape of the peptide displays an alpha-helix structure within the APP in its biologically active conformation. A realistic model of fibril formation is developed based on the 17 residues Abeta12-28 amyloid peptide, which has been shown to form fibrils structurally similar to those of the whole Abeta peptide. With the help of physical arguments and in keeping with experimental findings, the Abeta12-28 monomer is assumed to be in four possible states (i.e., native helix conformation, beta-hairpin, globular low-energy state, and unfolded state). Making use of these monomeric states, oligomers (dimers, tertramers, and octamers) were constructed. With the help of short, detailed molecular dynamics calculations of the three monomers and of a variety of oligomers, energies for these structures were obtained. Making use of these results within the framework of a simple yet realistic model to describe the entropic terms associated with the variety of amyloid conformations, a phase diagram can be calculated of the whole many-body system, leading to a thermodynamical picture in overall agreement with the experimental findings. In particular, the existence of micellar metastable states seem to be a key issue to determine the thermodynamical properties of the system.

Stability and structure of oligomers of the Alzheimer peptide Abeta16-22: from the dimer to the 32-mer

Several neurodegenerative diseases such as Alzheimer's, Parkinson's, and Huntington's diseases are associated with amyloid fibrils formed by different polypeptides. We probe the structure and stability of oligomers of different sizes of the fragment Abeta(16-22) of the Alzheimer beta-amyloid peptide using atomic-detail molecular dynamics simulations with explicit solvent. We find that only large oligomers form a stable beta-sheet aggregate, the minimum nucleus size being of the order of 8-16 peptides. This effect is attributed to better hydrophobic contacts and a better shielding of backbone-backbone hydrogen bonds from the solvent in bigger assemblies. Moreover, the observed stability of beta-sheet aggregates with a different number of layers can be explained on the basis of their solvent-accessible surface area. Depending on the stacking interface between the sheets, we observe straight or twisted structures, which could be linked to the experimentally observed polymorphism of amyloid fibrils. To compare our 32-mer structure to experimental data, we calculate its x-ray diffraction pattern. Good agreement is found between experimentally and theoretically determined reflections, suggesting that our model indeed closely resembles the structures found in vitro.

Sequence and structure analysis of parallel beta helices: implication for constructing amyloid structural models

Increasing evidence suggests that amyloids and parallel beta helices may share similar motifs. A systemic analysis of beta helices is performed to examine their sequence and structural characteristics. Ile prefers to occur in beta strands. In contrast, Pro is disfavored, compatible with the underlying assumption in Pro-scanning mutagenesis. Cys, Asn, and Phe form significant homostacking (identical amino acid interactions). Asn is highly conserved in the high-energy, left-handed alpha-helical conformation, where it frequently forms amide stacking. Based on the observed prominent stacking of chemically similar residues in parallel beta helices, we propose that within the "cross-beta" framework, amyloids with longer peptide chains may have common structural features of in-register, parallel alignment, with the side chains forming identical amino acid ladders. The requirement of ladder formation limits the combinations of side chain interactions. Such a limit combined with environmental conditions (e.g., pH, concentration) could be a major reason for the ability of most polypeptides to form amyloids.

Potential Lead for an Alzheimer Drug: A Peptide That Blocks Intermolecular Interaction and Amyloid β Protein-Induced Cytotoxicity

A peptide chAbeta30-16 (15-mer; CTFVRTHIFCKEHQF) was designed to bind to a region encompassing the entire polymerization-related (16KLVFF20) and part of the polymerization and toxicity-related (25GSNKGAIIGLM35) regions of amyloid beta-protein, Abeta1-42 by a hydropathic complementary approach. This peptide efficiently binds to Abeta and blocks intermolecular interaction and the formation of Abeta aggregates. In addition, the peptide neutralizes the cell toxicity of Abeta fibrils. The chAbeta30-16 peptide or its derivatives may be a starting point for the future development of drugs that prevent the neurotoxicity and deposition of Abeta in the brain of Alzheimer's disease.

Effects of solvent on the structure of the Alzheimer amyloid-beta(25-35) peptide

The free energy landscape for folding of the Alzheimer's amyloid-beta(25-35) peptide is explored using replica exchange molecular dynamics in both pure water and in HFIP/water cosolvent. This amphiphilic peptide is a natural by-product of the Alzheimer's amyloid-beta(1-40) peptide and retains the toxicity of its full-length counterpart as well as the ability to aggregate into beta-sheet-rich fibrils. Our simulations reveal that the peptide preferentially populates a helical structure in apolar organic solvent, while in pure water, the peptide adopts collapsed coil conformations and to a lesser extent beta-hairpin conformations. The beta-hairpin is characterized by a type II' beta-turn involving residues G29 and A30 and two short beta-strands involving residues N27, K28, I31, and I32. The hairpin is stabilized by backbone hydrogen-bonding interactions between residues K28 and I31; S26 and G33; and by side-chain-to-side-chain interactions between N27 and I32. Implications regarding the mechanism of aggregation of this peptide into fibrils and the role of the environment in modulating secondary structure are discussed.

Acceleration of alpha-synuclein aggregation by homologous peptides

alpha-Synuclein (alpha-Syn), amyloid beta-protein and prion protein are among the amyloidogenic proteins that are associated with the neurodegenerative diseases. These three proteins share a homologous region with a consensus sequence mainly consisting of glycine, alanine and valine residues (accordingly named as the GAV motif), which was proposed to be the critical core for the fibrillization and cytotoxicity. To understand the role of the GAV motif in protein amyloidogenesis, we studied the effects of the homologous peptides corresponding to the sequence of GAV motif region (residues 66-74) on alpha-Syn aggregation. The result shows that these peptides can promote fibrillization of wild-type alpha-Syn and induce that of the charge-incorporated mutants but not the GAV-deficient alpha-Syn mutant. The acceleration of alpha-Syn aggregation by the homologous peptides is under a sequence-specific manner. The interplay between the GAV peptide and the core regions in alpha-Syn may accelerate the aggregation process and stabilize the fibrils. This finding provides clues for developing peptide mimics that could promote transforming the toxic oligomers or protofibrils into the inert mature fibrils.

Modulating amyloid self-assembly and fibril morphology with Zn(II)

Metal ions (Zn(II)) are demonstrated as probes of amyloid structure in simple segments of the Abeta peptide, Abeta(13-21). By restricting the possible metal binding sites to His13/His14 dyad, we show that Zn2+ can specifically control the rate of self-assembly and dramatically regulate amyloid morphology via distinct coordination environments as characterized by X-ray absorption spectroscopy. The data establish that the single His13 is sufficient to coordinate Zn2+ productively for typical amyloid fiber formation, while a distinct Zn2+ coordination environment can be accessed in the presence of His13/Hi14 dyad to stabilize sheet/sheet associations and the transition to a ribbon/tube morphology.

Frequency-selective homonuclear dipolar recoupling in solid state NMR

We introduce a new approach to frequency-selective homonuclear dipolar recoupling in solid state nuclear magnetic resonance (NMR) with magic-angle spinning (MAS). This approach, to which we give the acronym SEASHORE, employs alternating periods of double-quantum recoupling and chemical shift evolution to produce phase modulations of the recoupled dipole-dipole interactions that average out undesired couplings, leaving only dipole-dipole couplings between nuclear spins with a selected pair of NMR frequencies. In principle, SEASHORE is applicable to systems with arbitrary coupling strengths and arbitrary sets of NMR frequencies. Arbitrary MAS frequencies are also possible, subject only to restrictions imposed by the pulse sequence chosen for double-quantum recoupling. We demonstrate the efficacy of SEASHORE in experimental (13)C NMR measurements of frequency-selective polarization transfer in uniformly (15)N, (13)C-labeled L-valine powder and frequency-selective intermolecular polarization transfer in amyloid fibrils formed by a synthetic decapeptide containing uniformly (15)N, (13)C-labeled residues.

Decoy mRNAs reduce beta-amyloid precursor protein mRNA in neuronal cells

Overproduction of amyloid precursor protein (APP) and beta-amyloid likely contribute to neurodegeneration in Alzheimer's disease (AD). In an effort to understand neuronal APP gene regulation, we identified a 52 base element (52sce) immediately downstream from the stop codon that stabilizes APP mRNA. Deletion of this domain drastically destabilized APP mRNAs and reduced APP synthesis in vitro. Chimeric globin-APP mRNAs containing the globin coding sequence fused to the entire APP 3'-UTR, showed regulation similar to full-length APP mRNA. A variety of cytoplasmic lysates contain 52sce RNA binding activity, suggesting cis-trans interactions regulate the element's functionality. Finally, the overexpression of chimeric mRNAs, containing the GFP coding sequence and APP 3'-UTR, dramatically reduced endogenous APP steady-state levels in SH-SY5Y neuroblastoma cells and suggests a novel approach to reduce the amyloid burden in AD patients.

Interaction-based evaluation of the propensity for amyloid formation with cross-beta structure

In order to reveal the requirements for amino acid sequences prone to form amyloid fibrils, a novel prediction method based on the original structural model of amyloids was developed. As a working hypothesis, two fundamental conditions were introduced into the design of the present system for the evaluation of the propensity for amyloidogenicity. The first of these two conditions was to ensure that the hydrophobic and hydrogen-bonding interactions between residues on neighboring antiparallel beta-strands were formed along a fibril axis. The other condition was that the hydrophobic interacting residues appeared on both faces of the protofibril, which gave line-matching interactions. Most peptides with sequences exhibiting high scores, as evaluated by this method, were found to easily form amyloids with the aid of a turn-inducing structure designed as a connection of two beta-strands. On the other hand, peptides with low-scoring native sequences and those modified by an internal residue-residue exchange (the latter yielding a null score) did not lead to amyloid formation. These data demonstrated the validity of this method for the prediction of amyloid structures. Moreover, the present study provided support for the proposed model of the essential structure associated with the above working hypothesis. The predicted high-scoring regions were in good agreement with the putative amyloid core regions reported thus far.

Polymorphic fibril formation by residues 10-40 of the Alzheimer's beta-amyloid peptide

We report investigations of the morphology and molecular structure of amyloid fibrils comprised of residues 10-40 of the Alzheimer's beta-amyloid peptide (Abeta(10-40)), prepared under various solution conditions and degrees of agitation. Omission of residues 1-9 from the full-length Alzheimer's beta-amyloid peptide (Abeta(1-40)) did not prevent the peptide from forming amyloid fibrils or eliminate fibril polymorphism. These results are consistent with residues 1-9 being disordered in Abeta(1-40) fibrils, and show that fibril polymorphism is not a consequence of disorder in residues 1-9. Fibril morphology was analyzed by atomic force and electron microscopy, and secondary structure and inter-side-chain proximity were probed using solid-state NMR. Abeta(1-40) fibrils were found to be structurally compatible with Abeta(10-40): Abeta(1-40) fibril fragments were used to seed the growth of Abeta(10-40) fibrils, with propagation of fibril morphology and molecular structure. In addition, comparison of lyophilized and hydrated fibril samples revealed no effect of hydration on molecular structure, indicating that Abeta(10-40) fibrils are unlikely to contain bulk water.

Amyloid beta-protein monomer structure: a computational and experimental study

The structural properties of the Abeta42 peptide, a main constituent of the amyloid plaques formed in Alzheimer's disease, were investigated through a combination of ion-mobility mass spectrometry and theoretical modeling. Replica exchange molecular dynamics simulations using a fully atomic description of the peptide and implicit water solvent were performed on the -3 charge state of the peptide, its preferred state under experimental conditions. Equilibrated structures at 300 K were clustered into three distinct families with similar structural features within a family and with significant root mean square deviations between families. An analysis of secondary structure indicates the Abeta42 peptide conformations are dominated by loops and turns but show some helical structure in the C-terminal hydrophobic tail. A second calculation on Abeta42 in a solvent-free environment yields compact structures turned "inside out" from the solution structures (hydrophobic parts on the outside, polar parts on the inside). Ion mobility experiments on the Abeta42 -3 charge state electrosprayed from solution yield a bimodal arrival time distribution. This distribution can be quantitatively fit using cross-sections from dehydrated forms of the three families of calculated solution structures and the calculated solvent-free family of structures. Implications of the calculations on the early stages of aggregation of Abeta42 are discussed.

Preparation of alpha-synuclein fibrils for solid-state NMR: expression, purification, and incubation of wild-type and mutant forms

We report the expression and purification of alpha-synuclein, a protein implicated in Parkinson's disease, from isotopically (13C, 15N) labeled bacterial growth media, as required for solid-state NMR structural studies. Expression from Escherichia coli (BL21(DE3)) was performed with a protocol optimized for time efficiency and yield. Chemical lysis, crude purification by ammonium sulfate precipitation, and two chromatography steps (hydrophobic interaction and size exclusion) yield 30-35 mg/L of growth medium. Purity is confirmed by gel electrophoresis and mass spectrometry. Furthermore, we demonstrate reproducible fibril growth by control of environmental incubation conditions. Highly resolved multidimensional solid-state NMR spectra indicate microscopic order throughout the majority of the AS fibril structure. The number of signals and intensities of well-resolved residue types (Thr, Ser, Ala, Gly, Val, and Ile) are consistent with a single conformation, which is reproducibly prepared by seeding consecutive preparations. Variations in the fibril growth rates and structural polymorphisms exhibited in the solid-state NMR spectra are minimized by careful control of incubation conditions.

The 3D profile method for identifying fibril-forming segments of proteins

Based on the crystal structure of the cross-beta spine formed by the peptide NNQQNY, we have developed a computational approach for identifying those segments of amyloidogenic proteins that themselves can form amyloid-like fibrils. The approach builds on experiments showing that hexapeptides are sufficient for forming amyloid-like fibrils. Each six-residue peptide of a protein of interest is mapped onto an ensemble of templates, or 3D profile, generated from the crystal structure of the peptide NNQQNY by small displacements of one of the two intermeshed beta-sheets relative to the other. The energy of each mapping of a sequence to the profile is evaluated by using ROSETTADESIGN, and the lowest energy match for a given peptide to the template library is taken as the putative prediction. If the energy of the putative prediction is lower than a threshold value, a prediction of fibril formation is made. This method can reach an accuracy of approximately 80% with a P value of approximately 10(-12) when a conservative energy threshold is used to separate peptides that form fibrils from those that do not. We see enrichment for positive predictions in a set of fibril-forming segments of amyloid proteins, and we illustrate the method with applications to proteins of interest in amyloid research.

Spontaneous fibril formation by polyalanines; discontinuous molecular dynamics simulations

Fibrillary protein aggregates rich in beta-sheet structure have been implicated in the pathology of several neurodegenerative diseases. In this work, we investigate the formation of fibrils by performing discontinuous molecular dynamics simulations on systems containing 12 to 96 model Ac-KA(14)K-NH(2) peptides using our newly developed off-lattice, implicit-solvent, intermediate-resolution model, PRIME. We find that, at a low concentration, random-coil peptides assemble into alpha-helices at low temperatures. At intermediate concentrations, random-coil peptides assemble into alpha-helices at low temperatures and large beta-sheet structures at high temperatures. At high concentrations, the system forms beta-sheets over a wide range of temperatures. These assemble into fibrils above a critical temperature which decreases with concentration and exceeds the isolated peptide's folding temperature. At very high temperatures and all concentrations, the system is in a random-coil state. All of these results are in good qualitative agreement with those by Blondelle and co-workers on Ac-KA(14)K-NH(2) peptides. The fibrils observed in our simulations mimic the structural characteristics observed in experiments in terms of the number of sheets formed, the values of the intra- and intersheet separations, and the parallel peptide arrangement within each beta-sheet. Finally, we find that when the strength of the hydrophobic interaction between nonpolar side chains is high compared to the strength of hydrogen bonding, amorphous aggregates, rather than fibrillar aggregates, are formed.

Mutagenesis of the central hydrophobic cluster in Abeta42 Alzheimer's peptide. Side-chain properties correlate with aggregation propensities

Protein misfolding and deposition underlie an increasing number of debilitating human disorders. Alzheimer's disease is pathologically characterized by the presence of numerous insoluble amyloid plaques in the brain, composed primarily of the 42 amino acid human beta-amyloid peptide (Abeta42). Disease-linked mutations in Abeta42 occur in or near a central hydrophobic cluster comprising residues 17-21. We exploited the ability of green fluorescent protein to act as a reporter of the aggregation of upstream fused Abeta42 variants to characterize the effects of a large set of single-point mutations at the central position of this hydrophobic sequence as well as substitutions linked to early onset of the disease located in or close to this region. The aggregational properties of the different protein variants clearly correlated with changes in the intrinsic physicochemical properties of the side chains at the point of mutation. Reduction in hydrophobicity and beta-sheet propensity resulted in an increase of in vivo fluorescence indicating disruption of aggregation, as confirmed by the in vitro analysis of synthetic Abeta42 variants. The results confirm the key role played by the central hydrophobic stretch on Abeta42 deposition and support the hypothesis that sequence tunes the aggregation propensities of polypeptides.

Thermal and chemical stability of diphenylalanine peptide nanotubes: implications for nanotechnological applications

The diphenylalanine peptide, the core recognition motif of the beta-amyloid polypeptide, efficiently self-assembles into discrete, well-ordered nanotubes. Here, we describe the notable thermal and chemical stability of these tubular structures both in aqueous solution and under dry conditions. Scanning and transmission electron microscopy (SEM and TEM) as well as atomic force microscopy (AFM) revealed the stability of the nanotubes in aqueous solution at temperatures above the boiling point of water upon autoclave treatment. The nanotubes preserved their secondary structure at temperatures up to 90 degrees C, as shown by circular dichroism (CD) spectra. Cold field emission gun (CFEG) high-resolution scanning electron microscope (HRSEM) and thermogravimetric analysis (TGA) of the peptide nanotubes after dry heat revealed durability at higher temperature. It was shown that the thermal stability of diphenylalanine peptide nanotubes is significantly higher than that of a nonassembling dipeptide, dialanine. In addition to thermal stability, the peptide nanotubes were chemically stable in organic solvents such as ethanol, methanol, 2-propanol, acetone, and acetonitrile, as shown by SEM analysis. Moreover, the acetone environment enabled AFM imaging of the nanotubes in solution. The significant thermal and chemical stability of the peptide nanotubes demonstrated here points toward their possible use in conventional microelectronic and microelectromechanics processes and fabrication into functional nanotechnological devices.

Prion domains: sequences, structures and interactions

Mammalian and most fungal infectious proteins (also known as prions) are self-propagating amyloid, a filamentous beta-sheet structure. A prion domain determines the infectious properties of a protein by forming the core of the amyloid. We compare the properties of known prion domains and their interactions with the remainder of the protein and with chaperones. Ure2p and Sup35p, two yeast prion proteins, can still form prions when the prion domains are shuffled, indicating a parallel in-register beta-sheet structure.

Atomic-Level Description of Amyloid β-Dimer Formation

All-atom simulations have been carried out on a monomer and dimer of the aggregation-prone fragment (16-22) of amyloid beta peptide, which is implicated in Alzheimer's disease. The replica exchange molecular dynamics method, which has been successfully applied to peptide folding, is utilized as a means to sample the configurational space with proper Boltzmann weighting so that the structural, motional, and thermodynamic description of self-assembly can be obtained. The free energy landscape showing the delicate balance between different monomer and dimer conformations is mapped along carefully chosen reaction coordinates. The canonical ensembles at 38 different temperatures are used to describe the thermodynamics and the relative stabilities of at least six different dimer conformations including that of parallel and antiparallel orientations. We also delineate the nature of the molecular forces that activate and stabilize these different dimer conformations as a function of temperature, especially as related to secondary structural propensity of monomer. We identify parallel loop dimer conformations that are stabilized due to specific interactions with water molecules.

Experimental evidence for the reorganization of beta-strands within aggregates of the Abeta(16-22) peptide

Amyloidogenic deposits that accumulate in brain tissue with the progression of Alzheimer's disease contain large amounts of the amyloid beta-peptide. A small fragment of this peptide, comprising residues 16-22 (Abeta(16-22)), forms beta-sheets in isolation, which then aggregate into amyloid fibrils. Here, using isotope edited infrared spectroscopy to probe the secondary structure of the peptide with residue level specificity, we are able to show conclusively that the beta-sheets formed are antiparallel and, following an anneal cycle or prolonged incubation, are in register with the central residue (Phe19) in alignment across all strands. The alignment of strands proceeds via a rapid interchange from one sheet to another. This realignment of the peptide strands into a more favorable registry may have important implications for therapeutics since previous work has shown that well aligned beta-sheets form more stable amyloid fibrils.

Mechanisms of amyloid fibril self-assembly and inhibition. Model short peptides as a key research tool

The formation of amyloid fibrils is associated with various human medical disorders of unrelated origin. Recent research indicates that self-assembled amyloid fibrils are also involved in physiological processes in several micro-organisms. Yet, the molecular basis for the recognition and self-assembly processes mediating the formation of such structures from their soluble protein precursors is not fully understood. Short peptide models have provided novel insight into the mechanistic issues of amyloid formation, revealing that very short peptides (as short as a tetrapeptide) contain all the necessary molecular information for forming typical amyloid fibrils. A careful analysis of short peptides has not only facilitated the identification of molecular recognition modules that promote the interaction and self-assembly of fibrils but also revealed that aromatic interactions are important in many cases of amyloid formation. The realization of the role of aromatic moieties in fibril formation is currently being used to develop novel inhibitors that can serve as therapeutic agents to treat amyloid-associated disorders.

Amyloid β-Peptide Oligomerization in Silico: Dimer and Trimer

Soluble oligomers of Alzheimer's amyloid beta protein (Abeta) may act as effectors of neurotoxicity in early stages of Alzheimer's disease. Detailed information about the structure of Abeta in atomistic level and the dynamics of assembly of monomeric Abeta into oligomeric structures is rather elusive. We have performed replica exchange molecular dynamics (REMD) simulations on the formation of the dimer and trimer of Abeta10-35 peptide. We have observed spontaneous formation of several basic structural units that may act as a template or an intermediate for further aggregation of Alzheimer's Abeta protein. Various conformers, including interlocking structures of experimentally known bend double beta strands, are identified.

Experimental constraints on quaternary structure in Alzheimer's beta-amyloid fibrils

We describe solid-state nuclear magnetic resonance (NMR) measurements on fibrils formed by the 40-residue beta-amyloid peptide associated with Alzheimer's disease (Abeta(1-40)) that place constraints on the identity and symmetry of contacts between in-register, parallel beta-sheets in the fibrils. We refer to these contacts as internal and external quaternary contacts, depending on whether they are within a single molecular layer or between molecular layers. The data include (1) two-dimensional 13C-13C NMR spectra that indicate internal quaternary contacts between side chains of L17 and F19 and side chains of I32, L34, and V36, as well as external quaternary contacts between side chains of I31 and G37; (2) two-dimensional 15N-13C NMR spectra that indicate external quaternary contacts between the side chain of M35 and the peptide backbone at G33; (3) measurements of magnetic dipole-dipole couplings between the side chain carboxylate group of D23 and the side chain amine group of K28 that indicate salt bridge interactions. Isotopic dilution experiments allow us to make distinctions between intramolecular and intermolecular contacts. On the basis of these data and previously determined structural constraints from solid-state NMR and electron microscopy, we construct full molecular models using restrained molecular dynamics simulations and restrained energy minimization. These models apply to Abeta(1-40) fibrils grown with gentle agitation. We also present evidence for different internal quaternary contacts in Abeta(1-40) fibrils grown without agitation, which are morphologically distinct.

Structures for amyloid fibrils

Alzheimer's disease and Creutzfeldt-Jakob disease are the best-known examples of a group of diseases known as the amyloidoses. They are characterized by the extracellular deposition of toxic, insoluble amyloid fibrils. Knowledge of the structure of these fibrils is essential for understanding the process of pathology of the amyloidoses and for the rational design of drugs to inhibit or reverse amyloid formation. Structural models have been built using information from a wide variety of techniques, including X-ray diffraction, electron microscopy, solid state NMR and EPR. Recent advances have been made in understanding the architecture of the amyloid fibril. Here, we describe and compare postulated structural models for the mature amyloid fibril and discuss how the ordered structure of amyloid contributes to its stability.

Free energy landscapes for amyloidogenic tetrapeptides dimerization

The oligomerization of four peptide sequences, KFFE, KVVE, KLLE, and KAAE is studied using replica-exchange molecular dynamics simulations with an atomically detailed peptide model. Previous experimental studies reported that of these four peptides, only those containing phenylalanine and valine residues form fibrils. We show that the fibrillogenic propensities of these peptides can be rationalized in terms of the equilibrium thermodynamics of their early oligomers. Thermodynamic stability of dimers, as measured by the temperature of monomer association, is seen to be higher for those peptides that are able to form fibrils. Although the relative high and low stabilities of the KFFE and KAAE dimers arise from their respective high and low interpeptide interaction energies, the higher stability of the KVVE dimer over the KLLE system results from the smaller loss of configurational entropy accompanying the dimerization of KVVE. Free energy landscapes for dimerization are found to be strongly sequence-dependent, with a high free energy barrier separating the monomeric and dimeric states for KVVE, KLLE, and KAAE sequences. In contrast, the most fibrillogenic peptide, KFFE, displayed downhill assembly, indicating enhanced kinetic accessibility of its dimeric states. The dimeric phase for all peptide sequences is found to be heterogeneous, containing both antiparallel beta-sheet structures that can grow into full fibrils as well as disordered dimers acting as on- or off-pathway intermediates for fibrillation.

Characterization of amyloid structures at the molecular level by solid state nuclear magnetic resonance spectroscopy

Solid state nuclear magnetic resonance (NMR) spectroscopy is particularly useful in structural studies of amyloid fibrils because solid state NMR techniques have unique capabilities as site-specific, molecular-level structural probes of noncrystalline materials. These techniques provide experimental data that strongly constrain the secondary, tertiary, and quaternary structures of amyloid fibrils, permitting the development of experimentally based structural models. Examples of techniques that are applicable to amyloid samples prepared with isotopic labeling of specific sites and to samples prepared with uniform isotopic labeling of selected residues are presented, illustrating the utility of the various techniques and labeling schemes. Information regarding the preparation of amyloid samples for solid state NMR measurements is also included.

β‐Structures in Fibrous Proteins

The beta-form of protein folding, one of the earliest protein structures to be defined, was originally observed in studies of silks. It was then seen in early studies of synthetic polypeptides and, of course, is now known to be present in a variety of guises as an essential component of globular protein structures. However, in the last decade or so it has become clear that the beta-conformation of chains is present not only in many of the amyloid structures associated with, for example, Alzheimer's Disease, but also in the prion structures associated with the spongiform encephalopathies. Furthermore, X-ray crystallography studies have revealed the high incidence of the beta-fibrous proteins among virulence factors of pathogenic bacteria and viruses. Here we describe the basic forms of the beta-fold, summarize the many different new forms of beta-structural fibrous arrangements that have been discovered, and review advances in structural studies of amyloid and prion fibrils. These and other issues are described in detail in later chapters.

Peptide-based inhibitors of amyloid assembly

This review considers the design, synthesis, and mechanistic assessment of peptide-based fibrillogenesis inhibitors, mainly focusing on beta-amyloid, but generalizable to other aggregating proteins and peptides. In spite of revision of the "amyloid hypothesis," the investigation and development of fibrillogenesis inhibitors remain important scientific and therapeutic goals for at least three reasons. First, it is still premature to dismiss fibrils altogether as sources of cytotoxicity. Second, a "fibrillogenesis inhibitor" is typically identified experimentally as such, but these compounds may also bind to intermediates in the fibrillogenesis pathway and have hard-to-predict consequences, including improved clearance of more cytotoxic soluble oligomers. Third, inhibitors are valuable structural probes, as the entire field of enzymology attests. Screening procedures for selection of random inhibitory sequences are briefly considered, but the bulk of the review concentrates on rationally designed fibrillogenesis inhibitors. Among these are internal segments of fibril-forming peptides, amino acid substitutions and side chain modifications of fibrillogenic domains, insertion of prolines into or adjacent to fibrillogenic domains, modification of peptide termini, modification of peptide backbone atoms (including N-methylation), peptide cyclization, use of D-amino acids in fibrillogenic domains, and nonpeptidic beta-sheet mimics. Finally, we consider methods of assaying fibrillogenesis inhibitors, including pitfalls in these assays. We consider binding of inhibitor peptides to their targets, but because this is a specific application of the more general and much larger problem of assessing protein-protein interactions, this topic is covered only briefly. Finally, we consider potential applications of inhibitor peptides to therapeutic strategies.

NMR determination of photorespiration in intact leaves using in vivo 13CO2 labeling

Solid-state 13C NMR measurements of intact soybean leaves labeled by 13CO2 lead to the conclusion that photorespiration is 17% of photosynthesis for a well-watered and fertilized plant. This is the first direct assessment of the level of photorespiration in a functioning plant. A 13C{31P} rotational-echo double-resonance (REDOR) measurement tracked the incorporation of 13C label into intermediates in the Calvin cycle as a function of time. For labeling times of 5 min or less, the isotopic enrichment of the Calvin cycle depends on the flux of labeled carbon from 13CO2, relative to the flux of unlabeled carbon from glycerate returned from the photorespiratory cycle. Comparisons of these two rates for a fixed value of the 13CO2 concentration indicate that the ratio of the rate of photosynthesis to the rate of photorespiration of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) in soybean leaves is 5.7. This translates into a photorespiratory CO2 loss that is 21% of net CO2 assimilation, about 80% of the value estimated from Rubisco kinetics parameters. The ratio of rates is reduced at low external CO2 concentrations, as measured by net carbon assimilation rates. The carbon assimilation was determined from 13C-label spin counts converted into total carbon by the REDOR-determined isotopic enrichments of the Calvin cycle. The net carbon assimilation rates indicate that the rate of decarboxylation of glycine is not directly proportional to the oxygenase activity of Rubisco as is commonly assumed.

Structural models of amyloid-like fibrils

Amyloid fibrils are elongated, insoluble protein aggregates deposited in vivo in amyloid diseases, and amyloid-like fibrils are formed in vitro from soluble proteins. Both of these groups of fibrils, despite differences in the sequence and native structure of their component proteins, share common properties, including their core structure. Multiple models have been proposed for the common core structure, but in most cases, atomic-level structural details have yet to be determined. Here we review several structural models proposed for amyloid and amyloid-like fibrils and relate features of these models to the common fibril properties. We divide models into three classes: Refolding, Gain-of-Interaction, and Natively Disordered. The Refolding models propose structurally distinct native and fibrillar states and suggest that backbone interactions drive fibril formation. In contrast, the Gain-of-Interaction models propose a largely native-like structure for the protein in the fibril and highlight the importance of specific sequences in fibril formation. The Natively Disordered models have aspects in common with both Refolding and Gain-of-Interaction models. While each class of model suggests explanations for some of the common fibril properties, and some models, such as Gain-of-Interaction models with a cross-beta spine, fit a wider range of properties than others, no one class provides a complete explanation for all amyloid fibril behavior.

PROFASI: A Monte Carlo simulation package for protein folding and aggregation

We present a flexible and efficient program package written in C++, PROFASI, for simulating protein folding and aggregation. The systems are modeled using an all-atom description of the protein chains with only torsional degrees of freedom, and implicit water. The program package has a modular structure that makes the interaction potential easy to modify. The currently implemented potential is able to fold several peptides with about 20 residues, and has also been used to study aggregation and force-induced unfolding. The simulation methods implemented in PROFASI are Monte Carlo-based and include a semilocal move and simulated tempering. Adding new updates is easy. The code runs fast in both single- and multi-chain applications, as is illustrated by several examples.

Prediction of aggregation rate and aggregation-prone segments in polypeptide sequences

The reliable identification of beta-aggregating stretches in protein sequences is essential for the development of therapeutic agents for Alzheimer's and Parkinson's diseases, as well as other pathological conditions associated with protein deposition. Here, a model based on physicochemical properties and computational design of beta-aggregating peptide sequences is shown to be able to predict the aggregation rate over a large set of natural polypeptide sequences. Furthermore, the model identifies aggregation-prone fragments within proteins and predicts the parallel or anti-parallel beta-sheet organization in fibrils. The model recognizes different beta-aggregating segments in mammalian and nonmammalian prion proteins, providing insights into the species barrier for the transmission of the prion disease.

Structure and Orientation of Peptide Inhibitors Bound to Beta-amyloid Fibrils

Polymerization of the soluble beta-amyloid peptide into highly ordered fibrils is hypothesized to be a causative event in the development of Alzheimer's disease. Understanding the interactions of Abeta with inhibitors on an atomic level is fundamental for the development of diagnostics and therapeutic approaches, and can provide, in addition, important indirect information of the amyloid fibril structure. We have shown recently that trRDCs can be measured in solution state NMR for peptide ligands binding weakly to amyloid fibrils. We present here the structures for two inhibitor peptides, LPFFD and DPFFL, and their structural models bound to fibrillar Abeta(14-23) and Abeta(1-40) based on transferred nuclear Overhauser effect (trNOE) and transferred residual dipolar coupling (trRDC) data. In a first step, the inhibitor peptide structure is calculated on the basis of trNOE data; the trRDC data are then validated on the basis of the trNOE-derived structure using the program PALES. The orientation of the peptide inhibitors with respect to Abeta fibrils is obtained from trRDC data, assuming that Abeta fibrils orient such that the fibril axis is aligned in parallel with the magnetic field. The trRDC-derived alignment tensor of the peptide ligand is then used as a restraint for molecular dynamics docking studies. We find that the structure with the lowest rmsd value is in agreement with a model in which the inhibitor peptide binds to the long side of an amyloid fibril. Especially, we detect interactions involving the hydrophobic core, residues K16 and E22/D23 of the Abeta sequence. Structural differences are observed for binding of the inhibitor peptide to Abeta14-23 and Abeta1-40 fibrils, respectively, indicating different fibril structure. We expect this approach to be useful in the rational design of amyloid ligands with improved binding characteristics.