Phase transition of aqueous solutions of poly(N-isopropylacrylamide) and poly(N-isopropylmethacrylamide)

THERMOSENSITIVE NANOPARTICLES CONJUGATING WITH CD34 ANTIBODY AND ITS SOLUTION PEROPERTIES

Poly N-isopropylacrylamide (PNIPAAm) is a well-known temperature-sensitive polymer. When the temperature is higher than the lower critical solution temperature (LCST), PNIPAAm aquous solution is cloudy (phase separation occurred). In contrast, when the temperature is lower than the LCST, PNIPAAm is soluble in water (a homogeneous solution). The lower critical solution temperature (LCST) in aqueous solution of PNIPAAm was about 32~33°C. We prepared nano-scaled PNIPAAm particles containing carboxylic group on their surfaces by introducing acrylic acid monomer. The carboxylic groups were applied to conjugate with the amino group of the CD34 antibody. This immuno-conjugate can be applied on targeting the human CD34 positive cells, peripheral blood progenitor cells included, for cell purification and drug controlled release. In order to the active responding of controlled release of the conjugate in the body influenced by temperature, we hope to estimate the shifting of the gel-collapse temperature or cloud point of the immuno-conjugates by dynamic light scattering (DLS) and UV absorption. The results show that the gel-collapse temperature of the nano-particle was not significantly affected by the content of AA between 1.5~5 mol%. However, cloud point of the solution was elevated by the conjugation of CD34 antibody to 37°C. When CD34-conjugated particle was subsequently incorporated with recombinant FLT3-ligand, which is a smaller molecule compare to CD34 antibody, cloud point of the solution was not affected.

Programmable light-controlled shape changes in layered polymer nanocomposites

We present soft, layered nanocomposites that exhibit controlled swelling anisotropy and spatially specific shape reconfigurations in response to light irradiation. The use of gold nanoparticles grafted with a temperature-responsive polymer (poly(N-isopropylacrylamide), PNIPAM) with layer-by-layer (LbL) assembly allowed placement of plasmonic structures within specific regions in the film, while exposure to light caused localized material deswelling by a photothermal mechanism. By layering PNIPAM-grafted gold nanoparticles in between nonresponsive polymer stacks, we have achieved zero Poisson's ratio materials that exhibit reversible, light-induced unidirectional shape changes. In addition, we report rheological properties of these LbL assemblies in their equilibrium swollen states. Moreover, incorporation of dissimilar plasmonic nanostructures (solid gold nanoparticles and nanoshells) within different material strata enabled controlled shrinkage of specific regions of hydrogels at specific excitation wavelengths. The approach is applicable to a wide range of metal nanoparticles and temperature-responsive polymers and affords many advanced build-in options useful in optically manipulated functional devices, including precise control of plasmonic layer thickness, tunability of shape variations to the excitation wavelength, and programmable spatial control of optical response.

Novel porphyrin-labelled poly(N-isopropylacrylamides): syntheses from bromoalkyl-containing prepolymers and physicochemical properties

Novel water-soluble tetraarylporphyrin-labelled polymers have been synthesized by the reaction of bromoalkyl-containing poly(N-isopropylacrylamides) with 5-(4-pyridyl)-10,15,20-tri(4-methoxyphenyl) porphyrin. Corresponding Zn -porphyrin-containing polymers have also been prepared. Phase transition diagrams show that aqueous polymer solutions exhibit phase separation upon heating. Absorption spectra of the porphyrin-labelled polymers have been recorded in water and organic solvents. It is found that the absorption bands in aqueous polymer solutions are broadened and shifted bathochromically, the peak intensity of the Soret band in the polymer spectra being strongly lowered in water. Fluorescence properties of the polymers are briefly reported.

Preparation and characterization of low dispersity anionic multiresponsive core-shell polymer nanoparticles

We prepared anionic multistimuli responsive core-shell polymer nanoparticles with very low size dispersity. By using either acrylic acid (AA) or methacrylic acid (MA) as a comonomer in the poly(N-isopropyl acrylamide) (PNIPAM) shell, we are able to change the distribution of negative charges in the nanoparticle shell. The particle size, volume phase transition temperature, and aggregation state can be modulated using temperature, pH, or ionic strength, providing a very versatile platform for applications in sensors, medical diagnostics, environmental remediation, etc. The nanoparticles have a glassy poly(methyl methacrylate) (PMMA) core of ca. 40 nm radius and a cross-linked PNIPAM anionic shell with either AA or MA comonomers. The particles, p(N-AA) and p(MA-N), respectively, have the same total charge but different charge distributions. While the p(MA-N) particles have the negative charges preferentially distributed toward the inner shell, in the case of the p(N-AA) particles the charge extends more to the particle outer shell. The volume phase transition temperature (T(VPT)) of the particles is affected by the charge distribution and can be fine-tuned by controlling the electrostatic repulsion on the particle shell (using pH and ionic strength). By suppressing the particle charge we can also induce temperature-driven particle aggregation.

High throughput discovery of thermo-responsive materials using water contact angle measurements and time-of-flight secondary ion mass spectrometry

Switchable materials that alter their chemical or physical properties in response to external stimuli allow for temporal control of material-biological interactions, thus, are of interest for many biomaterial applications. Our interest is the discovery of new materials suitable to the specific requirements of certain biological systems. A high throughput methodology has been developed to screen a library of polymers for thermo-responsiveness, which has resulted in the identification of novel switchable materials. To elucidate the mechanism by which the materials switch, time-of-flight secondary ion mass spectrometry has been employed to analyse the top 2 nm of the polymer samples at different temperatures. The surface enrichment of certain molecular fragments has been identified by time-of-flight secondary ion mass spectrometry analysis at different temperatures, suggesting an altered molecular conformation. In one example, a switch between an extended and collapsed conformation is inferred. Copyright © 2012 John Wiley & Sons, Ltd.

Thermoresponsive hydrogels from symmetrical triblock copolymers poly(styrene-block-(methoxy diethylene glycol acrylate)-block-styrene)

A series of symmetrical, thermo-responsive triblock copolymers was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization, and studied in aqueous solution with respect to their ability to form hydrogels. Triblock copolymers were composed of two identical, permanently hydrophobic outer blocks, made of low molar mass polystyrene, and of a hydrophilic inner block of variable length, consisting of poly(methoxy diethylene glycol acrylate) PMDEGA. The polymers exhibited a LCST-type phase transition in the range of 20-40 °C, which markedly depended on molar mass and concentration. Accordingly, the triblock copolymers behaved as amphiphiles at low temperatures, but became water-insoluble at high temperatures. The temperature dependent self-assembly of the amphiphilic block copolymers in aqueous solution was studied by turbidimetry and rheology at concentrations up to 30 wt %, to elucidate the impact of the inner thermoresponsive block on the gel properties. Additionally, small-angle X-ray scattering (SAXS) was performed to access the structural changes in the gel with temperature. For all polymers a gel phase was obtained at low temperatures, which underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurred. With increasing length of the PMDEGA inner block, the gel-sol transition shifts to markedly lower concentrations, as well as to higher transition temperatures. For the longest PMDEGA block studied (DP(n) about 450), gels had already formed at 3.5 wt % at low temperatures. The gel-sol transition of the hydrogels and the LCST-type phase transition of the hydrophilic inner block were found to be independent of each other.

Advances in polymeric systems for tissue engineering and biomedical applications

The characteristics of tissue engineered scaffolds are major concerns in the quest to fabricate ideal scaffolds for tissue engineering applications. The polymer scaffolds employed for tissue engineering applications should possess multifunctional properties such as biocompatibility, biodegradability and favorable mechanical properties as it comes in direct contact with the body fluids in vivo. Additionally, the polymer system should also possess biomimetic architecture and should support stem cell adhesion, proliferation and differentiation. As the progress in polymer technology continues, polymeric biomaterials have taken characteristics more closely related to that desired for tissue engineering and clinical needs. Stimuli responsive polymers also termed as smart biomaterials respond to stimuli such as pH, temperature, enzyme, antigen, glucose and electrical stimuli that are inherently present in living systems. This review highlights the exciting advancements in these polymeric systems that relate to biological and tissue engineering applications. Additionally, several aspects of technology namely scaffold fabrication methods and surface modifications to confer biological functionality to the polymers have also been discussed. The ultimate objective is to emphasize on these underutilized adaptive behaviors of the polymers so that novel applications and new generations of smart polymeric materials can be realized for biomedical and tissue engineering applications.

Degradation, cytotoxicity, and biocompatibility of NIPAAm-based thermosensitive, injectable, and bioresorbable polymer hydrogels

A thermosensitive, injectable, and bioresorbable polymer hydrogel, poly(N-isopropylacrylamide-co-dimethyl-γ-butyrolactone acrylate-co-acrylic acid) [poly(NDBA)], was synthesized by radical copolymerization with 7.00 mol % dimethyl-γ-butyrolactone acrylate in tetrahydrofuran. The chemical composition was determined by acid titration in conjunction with (1) H NMR quantification. The molecular weight and polydispersity were determined by gel permeation chromatography in conjunction with static light scattering. The degradation properties of the polymer hydrogel were characterized using differential scanning calorimetry, percentage mass loss, cloud point test, and swelling ratio over time. It was found that the initial lower critical solution temperature (LCST) of the polymer is between room temperature and body temperature and that it takes about 2 weeks for the LCST to surpass body temperature under physiological conditions. An indirect cytotoxicity test indicated that this copolymer has relatively low cytotoxicity as seen with 3T3 fibroblast cells. The in vivo-gelation and degradation study showed good agreement with in vitro-degradation findings, and no detrimental effects to adjacent tissues were observed after the complete dissolution of the polymer. © 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part A:, 2011.

Hydration, phase separation and nonlinear rheology of temperature-sensitive water-soluble polymers

The collapse of a poly(N-isopropylacrylamide) (PNIPAM) chain upon heating and the phase diagrams of aqueous PNIPAM solutions with a very flat lower critical solution temperature (LCST) phase separation line are theoretically studied on the basis of cooperative dehydration (simultaneous dissociation of bound water molecules in a group of correlated sequence), and compared with the experimental observation of temperature-induced coil-globule transition by light scattering methods. The transition becomes sharper with the cooperativity parameter σ of hydration. The reentrant coil-globule-coil transition and cononsolvency in a mixed solvent of water and methanol are also studied from the viewpoint of competitive hydrogen bonds between polymer-water and polymer-methanol. The downward shift of the cloud-point curves (LCST cononsolvency) with the mol fraction of methanol due to the competition is calculated and compared with the experimental data. Aqueous solutions of hydrophobically modified PNIPAM carrying short alkyl chains at both chain ends (telechelic PNIPAM) are theoretically and experimentally studied. The LCST of these solutions is found to shift downward along the sol-gel transition curve as a result of end-chain association (association-induced phase separation), and separate from the coil-globule transition line. Associated structures in the solution, such as flower micelles, mesoglobules, and higher fractal assembly, are studied by ultra small-angle neutron scattering with theoretical modeling of the scattering function. Dynamic-mechanical modulus, nonlinear stationary viscosity, and stress build-up in start-up shear flows of the associated networks are studied on the basis of the affine and non-affine transient network theory. The molecular conditions for thickening, strain hardening, and stress overshoot are found in terms of the nonlinear amplitude A of the chain tension and the tension-dissociation coupling constant g.

Influence of the length and grafting density of PNIPAM chains on the colloidal and optical properties of quantum dot/PNIPAM assemblies

Structural and optical characterization of water soluble, thermo-responsive quantum dot/poly(N-isopropyl acrylamide) (QD/PNIPAM) hybrid particles using fluorescence correlation spectroscopy (FCS) and time-correlated single photon counting (TCSPC) measurements performed at temperatures below and above the lower critical solution temperature (LCST) of PNIPAM is reported. By increasing the temperature above the LCST, the signature of the PNIPAM chain collapse covering the QDs is revealed by FCS measurements. Despite the significant structural change, the TCSPC measurements show that the fluorescence lifetimes remain of the same order of magnitude at T > LCST. Such QD/PNIPAM hybrid particles with water solubility and robust thermo-responsive behavior at physiologically relevant temperatures are potentially useful for (bio)molecular sensing and separation applications.

Stimulus-responsiveness and drug release from porous silicon films ATRP-grafted with poly(N-isopropylacrylamide)

In this report, we employ surface-initiated atom transfer radical polymerization (SI-ATRP) to graft a thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAM), of controlled thickness from porous silicon (pSi) films to produce a stimulus-responsive inorganic-organic composite material. The optical properties of this material are studied using interferometric reflectance spectroscopy (IRS) above and below the lower critical solution temperature (LCST) of the PNIPAM graft polymer with regard to variation of pore sizes and thickness of the pSi layer (using discrete samples and pSi gradients) and also the thickness of the PNIPAM coatings. Our investigations of the composite's thermal switching properties show that pore size, pSi layer thickness, and PNIPAM coating thickness critically influence the material's thermoresponsiveness. This composite material has considerable potential for a range of applications including temperature sensors and feedback controlled drug release. Indeed, we demonstrate that modulation of the temperature around the LCST significantly alters the rate of release of the fluorescent anticancer drug camptothecin from the pSi-PNIPAM composite films.

Aqueous polymeric sensors based on temperature-induced polymer phase transitions and solvatochromic dyes

This feature article provides, for the first time, an overview of the research that guided the way from fundamental studies of the thermo-responsive phase separation of aqueous polymer solutions to polymeric sensor systems. The incorporation of solvatochromic dyes into thermoresponsive polymers as well as the concepts of polymeric sensors are presented and discussed in detail.

Temperature-responsive chromatography for the separation of biomolecules

Temperature-responsive chromatography for the separation of biomolecules utilizing poly(N-isopropylacrylamide) (PNIPAAm) and its copolymer-modified stationary phase is performed with an aqueous mobile phase without using organic solvent. The surface properties and function of the stationary phase are controlled by external temperature changes without changing the mobile-phase composition. This analytical system is based on nonspecific adsorption by the reversible transition of a hydrophilic-hydrophobic PNIPAAm-grafted surface. The driving force for retention is hydrophobic interaction between the solute molecules and the hydrophobized polymer chains on the stationary phase surface. The separation of the biomolecules, such as nucleotides and proteins was achieved by a dual temperature- and pH-responsive chromatography system. The electrostatic and hydrophobic interactions could be modulated simultaneously with the temperature in an aqueous mobile phase, thus the separation system would have potential applications in the separation of biomolecules. Additionally, chromatographic matrices prepared by a surface-initiated atom transfer radical polymerization (ATRP) exhibit a strong interaction with analytes, because the polymerization procedure forms a densely packed polymer, called a polymer brush, on the surfaces. The copolymer brush grafted surfaces prepared by ATRP was an effective tool for separating basic biomolecules by modulating the electrostatic and hydrophobic interactions. Applications of thermally responsive columns for the separations of biomolecules are reviewed here.